Undangan Dan Agenda TOT APTARI 14-17 Desember 2015

7/23/2019 Undangan Dan Agenda TOT APTARI 14-17 Desember 2015

http://slidepdf.com/reader/full/undangan-dan-agenda-tot-aptari-14-17-desember-2015 1/7

Sekretariat APTARI:

SAPPK INSTITUT TEKNOLOGI BANDUNG (ITB)

ASOSIASI PENDIDIKAN TINGGI ARSITEKTUR INDONESIA

Bandung, 28 Oktober 2015

No. :

Hal : ToT Autodesk

Lamp. : 6 (enam) berkas

Kepada Yth.

Bapak / Ibu Ketua Jurusan / Program Studi Arsitektur

Anggota APTARI (daftar terlampir)

Di Tempat

Dengan hormat,

Sebagai tindak lanjut kerjasama antara APTARI dengan Autodesk Indonesia, maka dengan ini

kami mengundang maksimal 2 (dua) orang dosen dari setiap anggota APTARI untuk dapat

mengikuti ToT software Autodesk Revit.

Luaran dari training ini diharapkan kepada setiap peserta dapat membagi pengetahuan yang

telah diperolehnya di lingkungan masing-masing baik sebagai pengajar mata kuliah atau studiomaupun menjadi trainer untuk rekan-rekan dosen lainnya.

Peserta Pelatihan diharapkan dosen yang telah mengenal Autodesk dan berkeinginan untuk

mengelaborasi lebih jauh software Autodesk tersebut. Pendaftaran dilakukan dengan mengisi

form excel dan dikirimkan kembali ke [email protected] dan [email protected]

paling lambat tanggal 10 Desember 2015. Adapun kegiatan training ini akan diselenggarakan

pada:

Hari, tanggal : Senin - Kamis, 14 – 17 Desember 2015

Waktu : 08.00-16.00 (rincian acara terlampir)

Acara : TerlampirTempat : Department Teknik Arsitektur Universitas Hasanuddin,

Jalan Perintis Kemerdekaan km 10, Makassar,

Sulawesi Selatan

Perlu disampaikan bahwa Autodesk Indonesia akan menyediakan materi workshop termasuk

software, trainer, dan konsumsi selama kegiatan berlangsung. Sedangkan biaya perjalanan dan

akomodasi mohon didanai dari masing-masing instansi pengirim. Untuk menjaga berbagai

kemungkinan, diharapkan agar setiap peserta dapat membawa laptop/notebooknya masing-

masing.



Sekretariat APTARI:

SAPPK INSTITUT TEKNOLOGI BANDUNG (ITB)

Untuk informasi lebih lanjut terkait pendaftaran dan lainnya, dapat menghubungi:

Yuli Setiawati ( Lili )

Program Manager of IndonesiaAutodesk Education

Mobile : +62 81617770979

www.autodesk.com/education

Atas perhatian, kerja sama, serta kerhadirannya diucapkan banyak terimakasih.

Hormat Kami,

APTARI,

Dr. Ir. Adib Abadi, MSc.

Ketua

Tembusan :

1. Bu Lili Setiawati, Autodesk Indonesia

http://www.autodesk.com/education





1 Institut Teknologi Adhitama Surabaya (ITATS), Surabaya

2 Institut Teknologi Sepuluh November, Surabaya

3 Universitas Atmajaya, Yogyakarta

4 Universitas Brawijaya, Malang

5 Universitas Diponegoro, Semarang

6 Universitas Gadjah Mada, Yogyakarta

7 Universitas Hasanuddin, Makassar

8 Universitas Islam Indonesia, Yogyakarta

9 Universitas Kristen Duta Wacana, Yogyakarta

10 Universitas Kristen Petra, Surabaya

11 Universitas Merdeka, Malang

12 Universitas Muslim Indonesia, Makassar

13 Universitas Negeri Sebelas Maret, Surakarta

14 UPN “Veteran”, Surabaya

15 Universitas Udayana, Bali

16 UTY, Yogyakarta

17 Universitas Negeri Semarang (UNNES)

18 Sekolah Tinggi Teknik Malang (STTM)

19 Universitas Islam Negeri, Malang

20 Institut Teknologi Nasional, Malang

21 Universitas Katolik Soegijapranata, Semarang

22 Universitas Muhammadiyah Solo

23 ATA YKPN Yogyakarta

24 Universitas Tujuh Belas Agustus Semarang

25 Universitas Tadulako Palu

26 Universitas Tujuh Belas Agustus Surabaya

27 Universitas Warmadewa Bali28 Universitas Kristen Tomohon Sulawesi Utara

29 Institut Teknologi Minaesa Tomohon, Sulawesi Utara

30 Universitas Katolik Widya Mandira, Kupang-Timor

31 Universitas Sam Ratulangi, Manado

32 Universitas Sains Al-Qur’an (UNSIQ), Jawa Tengah – Wonosobo

33 Universitas Darma Cendika, Surabaya

34 Universitas Pepabri, Makassar

35 Universitas Muhammadiyah Kendari (UMK)

36 STITEK Bina Taruna Gorontalo

37 Universitas Khairun Ternate

38 Universitas Negeri Gorontalo39 Universitas Negeri Alaudin Makassar

40 Universitas Sains Teknologi Jayapura

41 Universitas Widya Kartika, Surabaya

42 Universitas Ichsan Gorontalo

43 Universitas Malikussaleh

NO INSTITUSI

ANGGOTA APTARI WILAYAH TIMUR : Jatim, jateng , DIY, Sulawesi, Maluku, NTT ,NTB, dan Bali



Agenda Acara Pelatihan Autodesk Revit Architecture Anggota APTARI

Department Teknik Arsitektur Universitas Hasanuddin

Jalan Perintis Kemerdekaan km 10, Makassar, Sulawesi Selatan

Universitas Hasanuddin, 14 – 17 Desember 2015

Hari 1

Senin, 14 Desember 2015

08.00 – 16.00

08.00 – 08.30 = Registrasi Ulang & Pembukaan

Chapter 1 - Introduction to BIM and Autodesk Revit

Building Information Modeling

Overview of the Interface

Standard Terminology

Starting Projects

Viewing Commands

Chapter 2 - Basic Drawing and Modify Tools

Using General Drawing Tools

Editing Elements Working with Basic Modify Tools

Working with Additional Modify Tools

Chapter 3 - Setting Up Levels and Grids

Setting Up Levels

Linking and Importing CAD Files

Creating Structural Grids

Adding Columns

Chapter 4 - Modeling Walls

Modeling Walls Modifying Walls

Hari 2

Selasa, 15 Desember 2015

08.30 – 16.00

Chapter 5 - Working with Doors and Windows

Inserting Doors and Windows

Loading Door and Window Types from the Library

Creating Additional Door and Window Sizes

Chapter 6 - Working with Curtain Walls

Creating Curtain Walls

Adding Curtain Grids Working with Curtain Wall Panels

Attaching Mullions to Curtain Grids

Chapter 7 - Working with Views

Duplicating Views

Adding Callout Views

Setting the View Display

Elevations and Sections

Chapter 8 - Adding Components

Adding Components

Modifying Components



Hari 3

Rabu, 16 Desember 2015

08.30 – 16.00

Chapter 9 - Modeling Floors

Modeling Floors

Creating Shaft Openings

Creating Sloped Floors

Chapter 10 - Modeling Ceilings

Modeling Ceilings

Adding Ceiling Fixtures

Creating Ceiling Soffits

Chapter 11 - Modeling Roofs

Modeling Roofs

Creating Roofs by Footprint

Reference Planes and Work Planes

Creating Roofs by Extrusion

Cleaning Up Wall and Roof Intersections

Chapter 12 - Vertical Circulation

Creating Component Stairs

Modifying Component Stairs

Working with Railings

Sketching Custom Stairs

Creating Ramps

Hari 4

Kamis, 17 Desember 2015

08.30 – 16.00

Chapter 13 - Creating Construction Documents

Setting Up Sheets

Placing and Modifying Views on Sheets

Printing Sheets

Chapter 14 - Annotating Construction Documents

Working with Dimensions

Working With Text

Adding Detail Lines and Symbols

Creating Legends

Chapter 15 - Adding Tags and Schedules

Adding Tags

Adding Rooms and Tags

Working with Schedules

Chapter 16 - Creating Details

Setting Up Detail Views

Adding Detail Components

Annotating Details

Keynoting and Keynote Legends



BIM with Autodesk Revit Software

Topics covered include:

- Understand the purpose of Building Information Management (BIM) and how it is

applied in the Autodesk Revit software.

- Navigating the Autodesk Revit workspace and interface.

- Working with the basic drawing and editing tools.

-

Creating Levels and Grids as datum elements for the model.- Creating a 3D building model with walls, curtain walls, windows, and doors.

- Adding floors, ceilings, and roofs to the building model.

- Creating component-based and custom stairs.

- Adding component features, such as furniture and equipment.

- Setting up sheets for plotting with text, dimensions, details, tags, and schedules.

- Creating details.

Training duration = 4 days

Day 1, 14 December 2015 ( 09.00 am – 04.00 pm )

Chapter 1 - Introduction to BIM and Autodesk Revit

Building Information Modeling

Overview of the Interface

Standard Terminology

Starting Projects

Viewing Commands

Chapter 2 - Basic Drawing and Modify Tools

Using General Drawing Tools

Editing Elements

Working with Basic Modify Tools Working with Additional Modify Tools

Chapter 3 - Setting Up Levels and Grids

Setting Up Levels

Linking and Importing CAD Files

Creating Structural Grids

Adding Columns

Chapter 4 - Modeling Walls

Modeling Walls

Modifying Walls




Chapter 5 - Working with Doors and Windows

Inserting Doors and Windows

Loading Door and Window Types from the

Library

Creating Additional Door and Window

Sizes

Chapter 6 - Working with Curtain Walls

Creating Curtain Walls

Adding Curtain Grids

Working with Curtain Wall Panels

Attaching Mullions to Curtain Grids

Chapter 7 - Working with Views

Duplicating Views

Adding Callout Views

Setting the View Display

Elevations and Sections

Chapter 8 - Adding Components

Adding Components

Modifying Components


Chapter 9 - Modeling Floors

Modeling Floors

Creating Shaft Openings

Creating Sloped Floors

Chapter 10 - Modeling Ceilings

Modeling Ceilings

Adding Ceiling Fixtures

Creating Ceiling Soffits

Chapter 11 - Modeling Roofs

Modeling Roofs

Creating Roofs by Footprint

Reference Planes and Work Planes

Creating Roofs by Extrusion

Cleaning Up Wall and Roof Intersections

Chapter 12 - Vertical Circulation

Creating Component Stairs

Modifying Component Stairs

Working with Railings

Sketching Custom Stairs

Creating Ramps


Chapter 13 - Creating Construction Documents

Setting Up Sheets

Placing and Modifying Views on Sheets

Printing Sheets

Chapter 14 - Annotating Construction Documents

Working with Dimensions

Working With Text

Adding Detail Lines and Symbols

Creating Legends

Chapter 15 - Adding Tags and Schedules

Adding Tags

Adding Rooms and Tags

Working with Schedules

Chapter 16 - Creating Details

Setting Up Detail Views

Adding Detail Components

Annotating Details

Keynoting and Keynote Legends

----- THE END -----