We Bring Intelligence to the Table.TMWe Bring Intelligence to the Table.TM

Our next generation of high precision plasma cutters works the way you do – intelligently. Ultra-Cut XT systems give

you the flexibility to increase cutting power and the assurance of superior quality, higher productivity and lower cutting costs. Ultra-Cut-XT systems are available in 100-400 Amp outputs for cutting plate up to 2" (50 mm) thick. And because of its expansion capabilities, you never have to worry about choosing the right system.

Victor ® Thermal Dynamics® introduces

ULTRA-CUT®

XT SYSTEMS

THE NEXT GENERATION OF HIGH PRECISION PLASMA CUTTING

THE NEXT GENERATION OF HIGH PRECISION PLASMA CUTTING

ULTRA-CUT® XT SYSTEMSVictor ® Thermal Dynamics® introduces

The new Ultra-Cut XT technology provides the next generation of higher productivity, increased flexibility and confidence in high precision plasma cutting. Their performance will meet or beat anyone on mild steel, and they are superior on non-ferrous metals. With the ability to grow with your business, you can expand from one system to the next higher in minutes. With the Ultra-Cut XT systems, you’ll always have the right amount of power today – and tomorrow.

Higher Productivity Delivers Greater ProfitsUltra-Cut XT high precision systems deliver superior cut quality, at superior cutting speeds.

• Outstanding parts life to reduce down time and lower the overall cost of ownership.

• Highest kW output for maximized duty cycle and cut speed.

• Reduced downtime during parts changes with the Speedlok cartridge design.

• Lower current draw to reduce cutting cost.

• Shorter switching time between marking and cutting process for higher daily throughput.

• Highest cut speed in its class on stainless steel – up to 3 times faster than similar cutting systems.

Superior Cut Quality Means Greater EfficiencyThe Ultra-Cut XT systems’ superior cut quality means that parts can go directly from the cutting table to welding, painting or assembly without expensive secondary operations.

Ultra-Cut XT high precision plasma systems cut with:

• Excellent dross-free cuts using oxygen (O2) plasma on mild steel.

• Unmatched cut quality on non-ferrous metals using unique Water Mist Secondary (WMS®) process.

• ISO 9013:2002 (E). Class 3 (depending on cut thickness angles below 3 deg) or better cut angles for true High Precision cuts.

• Minimal heat affected zone (HAZ) to improve welding quality.

• 3DPro technology sets the new standard in robotic cutting thin gauge material.

Relative Cutting Speed

200

150

100

50

5080

3810

2540

1270

mm/min

1/2 " 3/4 " 1" 1 ¼" 1 ½" 1 ¾" 2"(12 mm) (20 mm) (25 mm) (35 mm) (40 mm) (45 mm) (50 mm)

IPM

Ultra-Cut 400 XT Oxyfuel

4

5

3

2

1

100 130 150 200 250 260 300 300 400 400 4000

ISO

Clas

s

Current LevelPLATE THICKNESSES: 3/8" - 1 1/2"

3/8" 1/2"

3/8" 1/2" 3/4"

1/2" 3/4" 1"

3/4" 1" 1" 1 1/4" 1 1/2"

10 m

m

10 m

m

12 m

m

20 m

m

20 m

m

25 m

m

25 m

m

35 m

m

40 m

m

12 m

m

12 m

m

20 m

m

25 m

m

Competitor Victor Thermal Dynamics Ultra-Cut

Ultra-Cut Cut Bevel Comparison

HeavyCut Technology Cuts Cost By Length on Mild Steel

$0.5000$0.4500$0.4000$0.3500$0.3000$0.2500$0.2000$0.1500$0.1000$0.0500$0.0000

0.500" 0.625"

Thickness

0.75" 1.0" 1.5" 2.0"12.7 mm 15.9 mm 19.0 mm 25.4 mm 38.1 mm 50.8 mm

Ultra-Cut 400 XT Competitor A Competitor B

Now More Energy EfficientCompared to previous systems, Ultra-Cut XT systems draw about 20% less current and have an average electrical efficiency of more than 92%. They meet European Union Level V Efficiency Standards, and they will help companies everywhere lower utility bills.

Intelligent Solutions Set Us ApartFrom superior technology for cutting heavy metal to better plasma marking, Victor® Thermal Dynamics® offers intelligent high precision solutions for automated plasma cutting applications. The XT Series provides access for these powerful cutting resources.

HeavyCut™ TechnologyWhen cutting parts thicker than 3/4" (20 mm), rely on HeavyCut Technology to provide the best cut quality, parts life and precision. HeavyCut 300A and 400A electrode with

multiple Hafnium inserts increases parts life at high current applications. Water Mist Secondary (WMS)

optimizes non-ferrous metal cutting• Excellent non-ferrous metal cut quality using N2 as

plasma gas and ordinary tap water as the secondary.

• Lowest operating cost.

• Dross-free cutting from gauge .394" (1.0 mm) to 1 1/2" (40 mm).

• Oxide-free cut face surface.

• Wide parameter window.

• Higher cut speeds compared to H35 cutting.

“Bolt Ready” Holes with Diameter PRO™

Diameter PRO produces the industry’s most precise holes optimized for a diameter-to-thickness ratio of 1:1 or greater.

It is the ideal process for a precision hole or radius with minimal-to-no taper on mild steel from 10 gauge (3 mm) to 2" (50 mm), or 1" (25 mm) on aluminum.

We Bring Intelligence to the Table.TM

Longer Parts Life with XTremeLife™ Consumables

10

1000

2000

3000

4000

5000

20

Cut Duration (seconds)

Num

ber

of S

tart

s

Longer Parts Life with XTremeLife™ Consumables

30 40 50

100A 200A 300A 400AStainless Steel Cutting Speed Comparison

Competitor H35/N2Ultra-Cut® N2 2/H 0160

140

120

100

80

60

40

20

0

Spee

d (i

n/m

in)

Spee

d (m

m/m

in)

4000

3500

3000

2500

2000

1500

1000

500

0

300A

260A300A 400A

260A400A80A

100A

1/4" (6 mm)

3/8" (10 mm)

5/8" (15 mm)

1" (25 mm)

Material Thickness

Multiple Hafnium Inserts

ULTRA-CUT® XT SYSTEMSVictor ® Thermal Dynamics® introduces

Better Flow Control and Plasma Marking with the DFC-3000 Automatic Gas Control Good gas flow control enhances cut quality and extends consumables life. Digital flow control with the DFC-3000 — when paired with the iCNC XT controller — provides a better level of quality control. Together, they instantly set and control gas pressure, leading to faster cycle times and more productive cutting.

And for plasma marking with argon, the DFC-3000 and Ultra-Cut XT minimizes the purge cycle between marking and cutting, as well as the changeover time associated with manual controls. Change seamlessly between cutting and marking to:

• Indicate part numbers • Drill or hole points • Weld locations • Lot numbers • Bend or cut lines

Reliability – Performance You Can Rely OnVictor Thermal Dynamics rigorously tests its plasma cutters to ensure flawless performance. Should your Ultra-Cut XT need service, our modular approach minimizes parts inventory and repair time.

Added Flexibility – Expand As Your Cutting Needs GrowVictor Thermal Dynamics designed the Ultra-Cut XT with the flexibility to grow with your business. It features modular “inverter blocks” and a common cabinet for all amperages. To expand a 100A system into a 200A, 300A or 400A system, simply install additional blocks*. A field technician can install a new inverter block in less than 30 minutes.

The Victor Thermal Dynamics intelligent approach means never “under-buying” again. With Ultra-Cut XT systems, you’ll always have the right amount of power today — and tomorrow.

* When expanding by 200 or more amps, simply connect the required additional external cooler to the system, switch to the correct consumables and you’re ready to cut.

Easy-to-ServiceThe Ultra-Cut XT high precision system’s modular design is not only easier to upgrade, but also easier to maintain.

• The Amperage/Error display indicates the status of the XT system to accelerate trouble shooting.

• Common components in the XT system minimize inventory.

With the flexibility to grow with your business, you can start with an Ultra-Cut 100 XT, and when you are ready, expand to a 200, 300 or 400 Amp system. With the Ultra-Cut XT, you never have to worry about choosing the right system.

We Bring Intelligence to the Table.TM

XT™ Torch Technology – The New Standard for High Precision Plasma Cutting Systems

No Tools Required Unlike other torches, no tools are required to change either the torch consumables or major components in the torch head.

‘Leakless’ Torch Head Design Coolant doesn’t drip form the torch head when the consumables cartridge is removed form the torch head.

The design prevents air from entering the system and becoming trapped in the leads.

Self-Centering Components Consumable parts and torch body are precisely engineered to lock into place for absolute alignment and remain positioned cut after cut. Independently-aligned tip and electrode assures accurate re-centering of the consumable cartridge after each parts change. This guarantees best cut quality time and again.

Superior Warranty Victor Thermal Dynamics’ XT-Torch warranty covers components and service for a full 1-year period.

Precision Cuts on All Metals The XT-Torch dual gas technology provides one of the highest arc density plasma stream in the industry for precision cuts on mild steel, stainless steel, aluminum and other non-ferrous materials, and Ar for marking with the DFC 3000. Choices for plasma gas include - Air, N2, O2, Ar-H2 and Ar for marking with the DFC 3000. Shield gas choices include - Air, N2, O2, or Ar-H2 and H2O.

Relaxed Cutting Parameters With the XT-Torch the operating window permits wide travel speed variance, which means you’ll get great cuts more often with less wasted material and time.

• Less critical standoff height

• Wider ‘Operating Window’ for dross-free cutting

Speedlok Technology gives the fastest consumable change over in the industry.

At 300A and 400A, better cooling for consistent cut quality until the end of life.

Multiple Hafnium inserts improve parts life also at 300A and 400A.

Water cooled shield cup provides outstanding durability even at 2" (50 mm) piercing.

The Ultra-Cut XT is the latest addition to Victor Thermal Dynamics integrated automated plasma system solution. The next generation Ultra-Cut XT combines high precision cutting with exceptional cost-performance benefits to deliver a more profitable plasma cutting operation.

ULTRA-CUT® XT SYSTEMSVictor ® Thermal Dynamics® introduces

The XT™ System Technology

• Microprocessor controlled for optimized cut quality and parts life.

• Power upgrade. Inverter blocks can be easily added for higher cutting capacity.

Manual Gas Control

GCM2010 for stable gas flow and pressure control.

Auto Gas Control DFC 3000

Digital Flow Control for optimized and easy set up for frequent changes between materials and thicknesses. A must for marking with Argon and fast switching between cutting and marking. XT Torch

Fastest consumable changes with Speedlok technology.

New Arc Starter

For reduced HF emission.

System Capabilities

Ultra-Cut 100 XT Ultra-Cut 200 XT Ultra-Cut 300 XT Ultra-Cut 400 XT

MILD STEELProduction Pierce 1/2" (12 mm) 1" (25 mm) 1 1/2" (40 mm) 2" (50 mm)

Maximum Pierce 5/8" (15 mm) 1-1/2" (40 mm) 1-3/4" (45 mm) 2" (50 mm)

Edge Start ¾" (20 mm) 2-1/2" (65 mm) 3" (75 mm) 3-1/2" (90 mm) MS

STAINLESS STEELProduction Pierce 1/2" (12 mm) 1" (25 mm) 1" (25 mm) 2" (50 mm)

Maximum Pierce 5/8" (15 mm) 1" (25 mm) 1-1/4" (30 mm) 2" (50 mm)

Edge Start ¾" (20 mm) 2" (50 mm) 2" (50 mm) 4" (100 mm) SS

ALUMINUM

Production Pierce 1/2" (12 mm) 1" (25 mm) 1" (25 mm) 2" (50 mm)

Maximum Pierce 5/8" (15 mm) 1" (25 mm) 1-1/4" (30 mm) 2-1/4" (65 mm)

Edge Start ¾" (20 mm) 2" (50 mm) 2" (50 mm) 3-1/2" (90 mm)

We Bring Intelligence to the Table.TM

* Subject to change without notice

Unit Specifications*

Ultra-Cut 100 XTRated Output (Amps) 100 A

Output Range (Amps) 5-100 A

Output (Volts) 180 V

Input Volts (Volts, Phase, Hertz)

380 V, 3 ph, 50-60 Hz,400 V, 3 ph, 50-60 Hz, 480 V, 3 ph, 50-60 Hz

Input Amps (Amps, Volts)

33 A @ 380 V31 A @ 400 V26 A @ 480 V

Duty Cycle (@ 104ºF / 40º C) 100% (20 kW)

Max OCV 425 V

Plasma GasAir, O2, Ar-H2, N2 @ 120 psi (8.3 bar) and Ar for marking with DFC 3000

Shield Gas Air, N2, O2 @ 120 psi (8.3 bar), H20 @ 10 GPH (0.6 l/min)

Power Supply Weight 410 lbs (186 kg)

Dimensions 48.0" x 27.5" x 40.6" (1219 mm x 698 mm x 1031 mm)

Certifications CSA, CE, CCC

Ultra-Cut 200 XT

200 A

5-200 A

180 V

380 V, 3 ph, 50-60 Hz,400 V, 3 ph, 50-60 Hz, 480 V, 3 ph, 50-60 Hz

65 A @ 380 V62 A @ 400 V52 A @ 480 V

100% (40 kW)

425 V

Air, O2, Ar-H2, N2 @ 120 psi (8.3 bar) and Ar for marking with DFC 3000

Air, N2, O2 @ 120 psi (8.3 bar), H20 @ 10 GPH (0.6 l/min)

451 lbs (205 kg)

48.0" x 27.5" x 40.6" (1219 mm x 698 mm x 1031 mm)CSA, CE, CCC

Ultra-Cut 300 XTRated Output (Amps) 300 A

Output Range (Amps) 5-300 A

Output (Volts) 180 V

Input Volts (Volts, Phase, Hertz)

380 V, 3 ph, 50-60 Hz,400 V, 3 ph, 50-60 Hz, 480 V, 3 ph, 50-60 Hz

Input Amps (Amps, Volts)

97 A @ 380 V93 A @ 400 V77 A @ 480 V

Duty Cycle (@ 104ºF / 40º C) 100% (60 kW)

Max OCV 425 V

Plasma GasAir, O2, Ar-H2, N2 @ 120 psi (8.3 bar) and Ar for marking with DFC 3000

Shield Gas Air, N2, O2 @ 120 psi (8.3 bar), H20 @ 10 GPH (0.6 l/min)

Power Supply Weight 451 lbs (205 kg)

Dimensions 48.0" x 27.5" x 40.6" (1219 mm x 698 mm x 1031 mm)

Certifications CSA, CE, CCC

Ultra-Cut 400 XT

400 A

5-400 A

200 V

380 V, 3 ph, 50-60 Hz,400 V, 3 ph, 50-60 Hz, 480 V, 3 ph, 50-60 Hz

144 A @ 380 V137 A @ 400 V114 A @ 480 V

100% (80 kW)

425 V

Air, O2, Ar-H2, N2 @ 120 psi (8.3 bar) and Ar for marking with DFC 3000

Air, N2, O2, Ar-H2 @ 120 psi (8.3 bar), H20 @ 10 GPH (0.6 l/min)

555 lbs (252 kg)

48.0" x 27.5" x 40.6" (1219 mm x 698 mm x 1031 mm)CSA, CE, CCC

ULTRA-CUT® XT SYSTEMSVictor ® Thermal Dynamics® introduces

U.S. Customer Care: 866-279-2628 • Canada Customer Care: 905-827-4515 • International Customer Care: 940-381-1212

Form No. 63-1305 (04/26/13) © 2013 Victor Technologies International, Inc. VictorTechnologies.com Printed in U.S.A.

TM

Note: The cutting speed chart includes preliminary data and is subject to change without notice. Take care in comparison. The speeds noted above are best cut quality speeds. Often, competitors show maximum cutting speeds. Although much higher speeds can be achieved, edge quality and bevel angle may be compromised. The capabilities shown in this table were obtained by using new consumables, correct gas and current settings, accurate torch height control and with the torch perpendicular to the workpiece. The operating chart does not list all processes available for the Ultra-Cut XT systems. Please contact Victor Thermal Dynamics for more information.

Material Thickness (in) Speed(IPM) Amps Plasma

/ShieldThickness

(mm)Speed

mm/min.

Mild Steel

10 ga. 30 30 O2/O2 3 9101/4 120 70 O2/Air 6 31001/4 150 100 O2/Air 6 40303/8 95 10 23001 48 200 O2/Air 25 1250

1 1/4 30 35 7503/4 100 300 O2/Air 20 25401 70 25 1780

1 1/4 50 35 9001 80 400 O2/Air 25 2100

1 1/2 45 40 13302 30 50 790

Stainless Steel

16 ga. 110 30 N2/H20 1.5 310014 ga. 170 50 N2/H20 2 43103/16 70 5 15231/4 50 70 N2/H20 6 14951/4 72 100 H35/N2 6 18803/8 55 10 13501/4 70 100 N2/H20 6 18103/4 50 200 N2/H20 20 11001 35 25 9001 40 300 N2/H20 25 1030

1 1/4 30 35 7601 35 300 H35/N2 25 920

1 1/2 30 40 7603/4 90 400 N2/H20 20 2286

1 1/2 30 40 7601 45 400 H35/N2 25 11702 17 50 4404 3.5 400 H35/H35 100 90

Aluminum

11 ga. 60 50 Air/Air 3 15201/4 100 N2/H20 6 27603/8 70 100 10 17003/4 90 N2/H20 20 22001 50 25 13001 60 300 N2/H20 25 1560

1 1/4 40 32 10001 85 H35/N2 25 2190

3/4 90 400 N2/H20 20 22001 1/2 55 40 1350

1 90 400 H35/N2 25 23302 30 50 810

Cutting Speed Chart For Ultra-Cut XT Systems