Upload
hatuong
View
218
Download
0
Embed Size (px)
Citation preview
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
3[ ]<02071
REV. 1.06
index a–c
center bottom armdeckend bottom arm
bottom arms & decks
222222
base nosebase nose end capelectrical floating kick platefloating kick plateflush base
base components242424242424
perf, 4–wayperf, extenderperf, feature end frameperf, gondolaslatwall, extenderslatwall, feature end frameslatwall, gondolasolid, 4–waysolid, bottle baysolid, extendersolid, feature end framesolid, gondolasquare cut
back panels34263325263325344626332525
contour end base
contour end base
30
4–way feature end framehardwaremetal top panelperf back panelshelvessolid back panelwood base
4–way34343434343434
base bulkheadcenter bottom arm tie downcover platecross barend bottom arm tie downflange bracketglideshang rod componentsheavy duty wallmount standardlevelerstandard wall tie bracketsuper structure locking keysuper structure postsuper structure u bartop cap anchor brackettop cap brackettouch–up paintupright & bottom arm tie downwallmount standard
accessories36393641394136413736393737373936413937
metal frontmetal returnmetal shelf mount brackettelescoping bracket
cornice40404040
bracecasterchannelhardware
caster components38383838
bottle baydouble bottomdouble end paneldouble tophardware packoverlay end panelsshelvessingle back bracesingle base coversingle bottomsingle end panelsingle topsolid back panels
bottle bay45464646484848474747474746
back room system
back room55
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
4 [ ]> 02071
REV. 1.06
cross tiereplacement top capslatwall tie bartie bartop cap
cross components232323232323
base & extender standard assemblycolor informationcustomer directed move–outsexploded gondola & wallcasegondola & wallcase component specificationsopen back componentsterms & conditions of saleunbalanced load calculationsunbalanced load ratings
information20891812-171971011
center standardend standardextender standard
gondola standards212121
heavy duty shelfstandard shelf
standard & heavy duty shelves2727
3" wire fencingbasket/shelf bracketsbook shelf adapterendless wire basketglass shelfproduct retainerreversible wire shelfshelf key
shelving options2829282929282928
bottom anglefeature end framehardwareperf back panelside railsign stem fittingslatwall back panelsolid back panelt–bracetop channel
feature end frame32313233323233333132
glass door assemblymetal end panelshardware
security case components353535
3 drawer locked narcotics3 drawer vial/bottle4 drawer accessory5 drawer accessory5 drawer RXadjustable shelfback splashbasic opencounter topdrawer & half doordual shelfhalf modularhigh rise end panellocked drawerover sinkprinterprinter pulloutsinkwaste
under counter cabinets53525051535454495450495254505351525149
outriggerwidespan
outrigger & widespan5556
index c–u
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
5[ ]<02071
REV. 1.06
akro binbase deckislandmonitor trayreinforced cross barshelfspeedwalltelephone traytray dividervial cap binwallwallmount standard
WireFlex™444342444443434444444243
index w–z
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
7[ ]<02071
REV. 1.06
Price and Acceptance: Streater reserves the rightto change its prices and other terms and/or conditionsof sale without notice. All orders placed shall be inwriting and become effective only upon acceptanceby Streater at its offices in Albert Lea, MN. Streaterat its discretion may add handling charges dependingon order size and/or order requirements.
Taxes: Buyer agrees to pay all taxes which Streatermay be required to assess. If buyer claims a taxexempt status, buyer will provide Streater with avalid tax-exemption certificate.
Payment Terms: Payment to Streater will be cashwith order or net 30 days to qualified buyers, uponapproval by Streater Credit Department. Overduepayments will be assessed interest charges at thelegal rate of the State of Minnesota or the state ofthe buyer's residence, whichever is greater.
Freight and Delivery: Freight is F.O.B. Albert Lea,MN. Method and route of delivery are at Streater'sdiscretion unless Streater is furnished with completeshipping instructions at least 10 days before thescheduled ship date. Time-sensitive delivery willbe handled at Streater's discretion. Quotations fortime-sensitive delivery are available upon request.Freight charges will be prepaid and added to theinvoice unless otherwise instructed. Streater willendeavor to ship on the requested ship date andevery effort will be made to fill orders completely;however, it may be necessary at times to backorder.Streater will not be liable for any delay in theperformance of any order or contract, or in thedelivery of any goods, or for any damages resultingfrom such delay, when such delay is due to fire,riots, acts of God, strikes or other events beyondthe control of Streater.
Freight and Damage Claims: Freight is F.O.B.Albert Lea MN. What this means is that title to theproduct is passed on to you when the freight carrierpicks up the shipment from Streater and signs thebill of lading. Any freight damage and resultantclaims are between you and the freight carrier. It isyour responsibility to file a freight claim.
Loss of Freight: Compare the counts of the bill oflading to what you actually receive. Any exceptionmust be noted on the carriers delivery receipt.Failure to note any exception at this time will resultin the carrier denying your claim.
Damage of Freight: Damage to goods receivedmust be noted on the carrier's delivery receiptbefore the driver leaves the place of delivery. Askthe driver for claim forms. If the driver does nothave any forms, call the carrier and request claimforms be mailed to you. Generally, if the damage tothe product exceeds $500.00, the carrier must becalled for an inspection. Salvage must be held forthe carrier (Very important).
Concealed Damage: If goods arrive in apparentlygood condition, but there is concealed damage,contact the carrier and ask for the goods to beinspected. Keep the product and the packagingmaterial until they have been inspected. A claimneeds to be filed with the carrier.
Returned Goods: No equipment may be returnedwithout the advance written approval of anauthorized Streater representative. Only stockcatalog items may be returned within 60 days oforiginal delivery and items must be in unusedcondition. A handling and restocking charge of 20percent of net price will be assessed on all returns.Buyer will forward all returns to Streater freightprepaid and all items must be properly packaged.
Warranty: Streater warrants to original purchaserthat the products it manufactures shall be free fromdefects in material and workmanship and willconform to applicable specifications, drawings,samples, and descriptions. This warranty shallextend for a period of one year from date of deliveryto original purchaser for use. Streater, at its option,may repair or replace any products which, uponStreater's inspection, prove to be defective. Exceptas set forth herein:THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED,INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY.UNDER NO CIRCUMSTANCES SHALL STREATER BE LIABLEFOR ANY CONSEQUENTIAL DAMAGES INCURRED BY ORIGINALPURCHASER AS A RESULT OF STREATER'S PERFORMANCEUNDER THIS ORDER.
terms & conditions of sale
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
8 [ ]> 02071
REV. 1.06
color information
STANDARD COLORS TYPE SET UP COSTLEADTIME COLORS
Metal None Normal
015–Decor White0LA–Frosty White0PP–Platinum Plus025–Black0KM–Dove Gray
Wood None Normal
015–Decor White0LA–Frosty White0PP–Platinum Plus0KM–Dove Gray
BaseComponents None Normal 025–Black
013–Dark Bronze
PlatedComponents
(where indicated)None Normal 082–Zinc plating (satin)
081–Chrome (bright)
Bottle Bay None Normal 0LA–Frosty White
OPTIONAL COLORS $500 for wood$500 for metalper Purchase
Order
Normal 0GX–Skyline Gray0J8–Bright White070–Bright Blue0MT–Liberty Red0KA–Charcoal013–Dark Bronze(when not used on base components)
025–Black (wood only)
CUSTOM COLORS As Quoted AsQuoted
Per customer request
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
9[ ]<02071
REV. 1.06
Customer requested changes to ship dates are subject to approval by Streater.Every reasonable effort will be made to accommodate these requests withoutadditional charges to the customer. However, customer requested move-outs withinfive (5) working days of the scheduled ship date will be subject to the following:
Surcharge1.
A. Orders scheduled for picking,packing and loading,but not yet worked on by the warehouse:LTL orders (less than a full semi-trailer load) will beassessed 5% of the net selling price of the order asa handling fee - minimum $50/maximum $250
Trailer-load sized order assessment will be deter-mined by Vice President of Sales or Vice Presidentof Manufacturing.
Jobs picked and sitting on loading dock, but not yetloaded:
• LTL orders will be assessed 10% of the net selling price of the order as a handling fee - minimum $100/maximum $500.
• Trailer-load sized order: load trailer, invoice customer and charge customer the storage charge for each trailer.
• For orders in process of being loaded, the assessment would be the same as the bullet above.
• There is a 20% restocking charge if it is necessary to unload a trailer.
B.
C.
customer directed move–outs
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
10 [ ]> 02071
REV. 1.06
SAMPLE CALCULATION
When heavily loading one side of your wall or gondola shelving, it is important to determine if you are creating anunbalanced load that exceeds the maximum design load (SEE LOAD CAPACITY CHART ON PAGE 106). The samplecalculation below illustrates how you can determine your unbalanced load in inch-pounds.
NOTE: Inch-pounds are a measure of the shelf loads acting at a distance (½ shelf depth) from the standard (upright).
NOTE: Shelf depth is divided by 2 because an evenlydistributed shelf load is calculated as a total load atcenter of shelf depth.
Shelf load is divided by 2 because a shelf load issupported by 2 standards.
Deck load does not contribute to unbalanced load.
STARTER / ADD-ON UNIT TYPE USED FOR ILLUSTRATION
SECTION BSECTION A
Side 1 Side 2 Side 1 Side 2
16" 16"
18" 18"
18" 18"
200#150#
200#
200#
200#
400#
400#9"
9" 9"
9"
8"8"
9"
9"400#
400#
8"
CALCULATE THE UNBALANCED LOADACTING ON THIS STANDARD
16"
18"
18"
B
ASide 1
18"
Side2
18"
16"
200#
400#
400#
150#
200#
200#
200#
400#
400#
SE
CT
ION
BS
EC
TIO
NA
Side 2Side 1Shelf depth ¸ 2 x Shelf load ¸ 2
xx
xxx
x
x
xx
8"
9"9"8"
9"9"
no load
8"9"9"
800"#1800"#1800"#
600"#900"#900"#
800"#1800"#1800"#
6800"#
0
4400"#
100#200#
200#75#
100#
100#
100#
200#200#
total (Section A & B)
6800"#- 4400"#
2400"#
Subtract the smaller from the larger
Total unbalanced load acting onstandard
unbalanced load calculations
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
11[ ]<02071
REV. 1.06
UNIT TYPE2½" Standard
INCH-POUND CAPACITY
STARTERone unit, with 2 end standards (single uprights)
STARTER/ADD-ONany one unit at either end of run with1 end standard & 1 center standard(double upright)
STARTER/ADD-ON/FEFany end unit (1 end standard & 1 center standard) at either end of run withfeature end attached
ADD-ON/ADD-ONany unit within a run with 2 center standards (double uprights)
3,400"#
9,500"#
12,000"#
12,000"#
SPECIAL NOTES:• Maximum height to depth ratio is 5:1. Any situation where the height of a standard is more than 5 times the length of the bottom arm must be approved by Streater engineering department.• The maximum unbalanced load on shelves above the joint on an extension standard (upright) should not exceed 2500 inch-pounds.• The loads applied to perforated back panels should not exceed 150 lbs. per panel.• Shelf locking keys increase inch-pound capacity by approximately 15%.• Please check with Streater engineering department for verification if unfamiliar with loading conditions.
unbalanced load capacity ratings
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
12 [ ]> 02071
REV. 1.06
full gondola - trimline half gondola & wallcase - trimline
with optional base nose added
full gondola - trimguard half gondola & wallcase - trimguard
50.56"55.56"60.56"65.56"70.56"85.56"95.56"
2.50"
12" - 14" - 16" -18" - 20" - 22" -
24" - 28"
7.18"
1.81"
1.00"
1.38"
.56"
4.00"
1.00" .87"
1.38"
1.84"
2.12"
50.56"55.56"60.56"65.56"70.56"85.56"95.56"
2.50"
12" - 14" - 16" -18" - 20" - 22" -
24" - 28"
7.18"
gondola & wallcase specifications
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
13[ ]<02071
REV. 1.06
trimguard contour end base with feature end frame
trimline contour end base with feature end frame
30.29" - 36.29" - 48.29"
50.56"55.56"60.56"65.56"70.56"85.56"95.56"
1.38"
2.12"
STANDARD DUTY 28.5" - 32.50" - 36.50" -40.50" - 44.50" - 48.50"
10.5"12.5"14.5"16.5"22.5"
13" - 15" - 17" - 19"- 25"
1.00"
4.00"7.25"
1.84"
2.12"
50.56"55.56"60.56"65.56"70.56"85.56"95.56"
2.12"
28.5" - 32.50" - 36.50" - 40.50" - 44.50" -48.50" -
13" - 15" - 17" - 19" -25"
10.5"12.5"14.5"16.5"22.5"
1.00"
1.38"
7.25"
2.12"
30.29"- 36.29" - 48.29"
contour end & feature end specifications
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
14 [ ]> 02071
REV. 1.06
top cap
tie bar
cross tie
end bottom arm
center bottom arm
• actual heights of standards37½" - 50½" - 60½" - 65½" - 70½" -85½" - 95½" -
• 12 gauge steel• baked acrylic enamel
• 30", 36" & 48" module lengths• kwik-fit™ - no attachment hardware required• 16 gauge steel• baked acrylic enamel
• 30", 36" & 48" module lengths• kwik-fit™ - no attachment hardware required• 18 gauge steel• baked acrylic enamel
• nominal lengths 12" - 14" - 16" - 18" - 20" - 22" - 24" - 28"• kwik-fit™ - no attachment hardware required• 14 gauge steel with 12 gauge steel hooks• baked acrylic enamel
• nominal lengths 12" - 14" - 16" - 18" - 20" - 22" - 24" - 28"• kwik-fit™ - no attachment hardware required• 13 gauge high strength steel• baked acrylic enamel
• 30", 36" & 48" module lengths• kwik-fit™ - no attachment hardware required• 16 gauge steel• baked acrylic enamel• available with electrical outlet
standards
29.97"35.97"47.97"
.75"2.49"
1.43"
2.46"
.49"
.56"
1.16"
.75"
1.70"
29.75"35.75"47.75"
2.50"2.50"
.57"
.73"1.25"
.375"
endstandard
centerstandard
10.78" - 12.78" - 14.78"16.78" - 18.78" - 20.78"
22.78" - 26.78".86"
6.22"
10.78" - 12.78" - 14.78"16.78" - 18.78" - 20.78"
22.78" -26.78"1.50
6.22"
29.7535.75"47.75"
gondola & wallcase component specifications
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
15[ ]<02071
REV. 1.06
base deck
trimline floating kick plate trimguard base nose end cap
trimguard base nose
nominal 1/4" back panel- finished one side
•30", 36" & 48" module lengths• one piece 23 gauge embossed steel deck pan with rolled-in 1¼" ticket moulding• welded end plates & reinforcement hat sections• two row perforations front & rear• baked acrylic enamel
• 30", 36" & 48" module lengths• protects front of base deck from carts, etc.• 18 gauge steel• baked acrylic enamel• optional item, order as added item to trim-line gondola kits
• finishes off ends of trimguard base nose• two per half starter module & four per full starter module• 18 gauge steel• baked acrylic enamel• optional item, sold individually
• 30", 36" and 48" module lengths• 18 gauge steel• baked acrylic enamel• available with electrical knockout
• Perforated or solid backs in choice of standard or optional color - baked enamel (see color chart for reference)
• slatwall backs in choice of standard or optional color - baked enamel (see color chart for reference) - with or without steel T-slot inserts
nominal 3/4" slatwall back panel- finished one side
29.8835.88"47.88"
12" - 14" - 16"18" - 20" - 22"
24" -28"
47.97"35.97"29.97"
2.13"
2.09"
1.84"
.58"
.44"
.60"
6.31"
29.97"35.97"47.97" 1.83"
.94"
2.10"
FixtureHeight
51"56"61"66"71"86"96"
ActualHeight
43.50"48.50"53.50"58.50"63.50"78.43"88.43"
35.12"47.12"
gondola & wallcase component specifications
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
16 [ ]> 02071
REV. 1.06
top cap anchoring bracket• 12 gauge steel• (82) zinc plated
standard wall tie bracket• 12 gauge steel• (82) zinc plated
*regular duty(2-1/2" wallcase) 86" - 96" heights includes 2 standard wall tie brackets per module
wallcase anchoring devices
end bottom armtie down
• 12 gauge steel• (82) zinc plated
center bottom armtie down
• 12 gauge steel• (82) zinc plated
.48"
2.12"
1.50"
.61" .105"
1.50" 1.02"
.19"
3.54"
.94"
1.02"
.50"
2.00"
.94"
.19"
4.00"
1.78"
gondola & wallcase component specifications
• - 14" - 16" - 18" - 24" nominal depths• 26" thru 46" nominal widths on standard duty• fits 14" thru 22" bases both sides• three row perforations front and three row perforations rear• baked acrylic enamel• available in trimguard and trimline
contour end base
feature end frame
• 30", 36" - 48" module widths• retains bottom of back panel when no base is required• 20 gauge steel• baked acrylic enamel
flush base
29.97"35.97"47.97"
7.38"
.65"
14.00"16.00"18.00"24.00"
26.50"30.50"34.50"38.50"42.50"46.50"
trim-guardshown
FixtureHeight51"56"61"66"71"86"
ActualHeight43.08"48.08"53.08"58.08"63.08"78.08"
30.29"36.29"48.29"
.88"
1.50"
• fits gondola heights through 86"• 30" - 36" - 48" module widths• choice of 1/4" back panels• support plate hooks on bottom arms• 1-1/4" slot spacing frame, 12 gauge steel• baked acrylic enamel
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
17[ ]<02072
REV. 1.06
caster assembly
• 36" - 48" module lengths• steel support 12 gauge steel• 2" dia. casters
2 "
35.87"47.87"
caster capacity:half gondola 550 pounds per sectionfull gondola 800 pounds per section
• adjustable height with use of key through slots and resting on top cap• 13 gauge steel• baked acrylic enamel
superstructure post
topview
1.50"
1.00"
gondola & wallcase component specifications
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
18 [ ]> 02072
REV. 1.06
basic gondola and wallcase
1. 2-1/2" end standardtwo per starter module
2. 2-1/2" center standardone per add-on module
3. top capone per module
4. tie barone per module 51" thru 96" height
*4a. slatwall tie bar used when instaling slatwall one per module 51" thru 71" two are needed for anything higher
5. cross tieone per module
6. end bottom armone pair per half starter moduletwo pairs per full starter module
7. center bottom armone per half add-on moduletwo per full add-on module
8. base deckone per half module
two per full module
9. trim-line floating kick plateone per half moduletwo per full module
10. 1/4" back panelordered separately
*11. trimguard base nose(added to floating kick plate)one per half moduletwo per full module
*12. trimguard base nose end captwo per half starter modulefour per full starter module
*13. flush baseone per half module
*14. extender standardsone per end standardtwo per center standard
*These items are optional
trimline basetrimguard base
exploded gondola & wallcase
1
1
23
4
5
3
78
86
6
10
99
1112
1
1
23
4
5
3
78
8 6
6
10
99
1112
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
19[ ]<02072
REV. 1.06
• To build 1 open back, 2 end standards, 2 cross ties, 2 tie bars, 2 top caps and 1 flush base will be needed• To add on to an open back, 1 center standard, 1 cross tie, 1 tie bar, 1 top cap, and 1 flush base will be needed• If back panels are desired, see page 25• See color chart for paint color choices
• To build 1 open back, 2 end standards, 2 cross ties, 2 tie bars and 2 top caps will be needed• To add on to an open back, 1 center standard, 1 cross tie, 1 tie bar and 1 top cap will be needed• If back panels are desired, see page 25• See color chart for paint color choices
open back with cross tie
open back with flush base
exploded open back
1
23
4
5
13
4
5
1
23
4
5
13
4
5
13
13
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
20 [ ]> 02072
REV. 1.06
• 2 end bottom arms ,1 base deck and 1 kickplate make up a single base.• 1 center bottom arm, 1 base deck and 1 kickplate make up an add–on base kit• Levelers, see page 36• Base bulkhead for heavy deck loads, see page 36• Trimguard base nose, see page 24• Designate paint color for deck and paint color for bottom arms and kickplate (see color chart for paint color choices)
• Each starter should have 2 end extender standards, 1 tie bar, and 1 H–channel (5" extender assembly does not need a tie bar)• Each add-on should have 2 end extender standards 1 tie bar, and 1 H–channel• Order back panel separately (see page 26)• Designate paint color (see color chart for paint colors available)
extender standards
base components
base & extender standard assembly
44
14
1414
7
8
8
6
6
9
9
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
21[ ]<02072
REV. 1.06
• Used in every add-on unit in a run of fixtures• To add levelers put a L at the beginning of the part number EX. L8403-0300 and add $3.00 per standard.• For levelers see page 36• For glides see page 36
center standard size
38 51 56 61 66 71 86 96
08712-013008712-003608712-003508712-003408712-003308712-003208712-003108712-0029
part number pricewt.
10.013.114.515.917.418.922.729.2
56.1046.0048.6054.3557.0062.2576.1085.85
25” extender center standard hardware
- - -
00060-107900060-115600060-1166
333
.10 .10 .10
1/4”-20x3/4” screw1/4”-20 hexnut1/4” washer
size part number priceqty.description
• For adding height to existing gondolas and wallcases• Back panels sold separately on page 25• Order 2 extender standards and hardware to assemble a center extender standard.
extender standard size
05 10 15 25
08800-050008800-050508800-050608800-0508
part number pricewt.
1.01.83.85.0
32.5035.0539.1045.40
5”-15” extender center standard hardware
- - -
00060-107900060-115600060-1166
222
.10 .10 .10
1/4”-20x3/4” screw1/4”-20 hexnut1/4” washer
size part number priceqty.description
• Used at ends of each run of fixtures• To add levelers put a L at the beginning of the part number EX. L8403-0300 and add $3.00 per standard.• To level standards yourself see page 36• For glides see page 36
end standard size
38 51 56 61 66 71 86 96
08403-030008403-006308403-006208403-006108403-006008403-005908403-005808403-0056
part number pricewt.
5.06.67.38.08.79.411.414.6
27.4022.3524.3526.5028.5530.6036.6541.50
gondola standards
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
22 [ ]> 02072
REV. 1.06
• Indicate left or right hand• To order bottom arms leveled add L to the beginning of the part number EX. L8704-1445 and add $2.60 per bottom arm.• To level bottom arms yourself see page 36• For glides see page 36• Must be ordered in quantities of 5
end bottom arm size
12 14 16 18 20 22 24 28
08704-154508704-154608704-154708704-154808704-154908704-155008704-155108704-1553
part number pricewt.
2.22.73.13.53.94.34.75.4
9.2510.4011.6512.9014.1515.3516.5018.75
• Used with center standards• To order bottom arms leveled add L to the beginning of the part number EX. L8704-1445 and add $2.60 per bottom arm.• To level bottom arms yourself see page 36• For glides see page 36• Must be ordered in quantities of 5
center bottom arm size
12 14 16 18 20 22 24 28
08704-152108704-152208704-152308704-152408704-152508704-152608704-152708704-1529
part number pricewt.
3.13.53.94.84.95.25.56.2
13.9015.0016.1517.3018.4019.5520.6522.70
bottom arms & decks
• Recommended evenly distributed load capacity:600# - 12” thru 22”800# - 24” thru 28”
• Formed tag moulding on front edge• Double row perforations front and rear• See color chart for paint colors available• Add base bulkhead (see page 36) for an additional 500 lbs capacity.• Must be ordered in quantities of 4
deck width
30 30 30 30 30 30 30 30
3636363636363636
4848484848484848
01358-123001358-143001358-163001358-183001358-203001358-223001358-243001358-2830
01358-123601358-143601358-163601358-183601358-203601358-223601358-243601358-2836
01358-124801358-144801358-164801358-184801358-204801358-224801358-244801358-2848
part number pricewt.
5.96.97.98.59.19.211.513.4
6.87.59.29.810.511.112.915.3
8.810.211.914.215.016.515.919.7
23.4524.8529.1531.4534.7536.5041.3047.35
23.4524.8529.1531.4534.7536.5041.3047.35
28.1533.3035.6041.8545.4547.2053.7058.25
depth
12 14 16 18 20 22 24 28
12 14 16 18 20 22 24 28
12 14 16 18 20 22 24 28
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
23[ ]<02072
REV. 1.06
• Used to cover top edge of back panel, fits into standards• Has hole for superstructure post• Must be ordered in quantities of 20
top cap size
30 36 48
08403-021408403-021308403-0212
part number pricewt.
2.22.63.4
8.70 8.70 10.80
• Used in gondola and wallcases at 51" and higher• Must be ordered in quantities of 20
tie bar size
30 36 48
08403-020808403-020708403-0206
part number pricewt.
1.31.52.1
5.65 5.65 7.05
• Needed to replace standard tie bar when unit has slatwall back panels• Must be ordered in quantities of 20
slatwall tie bar size
36 48
08403-675608403-6757
part number pricewt.
1.61.7
5.75 6.25
• Used in gondola and wallcases to retain panel• Must be ordered in quantities of 20
cross tie size
30 36 48
08403-818008403-818108403-8182
part number pricewt.
1.82.12.8
7.45 7.45 10.70
• Needed to replace top cap when using extenders with open backs• Prices available upon request
replacement top cap size
36 48
- -
part number pricewt.
2.73.1
- -
cross components
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
24 [ ]> 02072
REV. 1.06
• Snaps into bottom arms• Must be ordered in quantities of 10
floating kickplate size
30 36 48
08403-654908403-655008403-6551
part number pricewt.
3.13.75.0
12.9012.9016.40
• Has knockout for electrical hook-up• Prices available upon request
electrical floating kickplate size
36 48
part number pricewt.
3.75.0
- -
• Finishes off units without base decks• Must be ordered in quantities of 10
flush base size
30 36 48
08403-817508403-817608403-8177
part number pricewt.
3.33.84.6
33.6033.6037.90
• Converts trimline fixture to trimguard fixture• Provides extra bump protection for fixture• Must be ordered in quantities of 10
base nose size
36 48
08403-655908403-6560
part number pricewt.
2.73.6
9.7013.65
• Finishes end of base nose• Snaps into place, priced individually
base nose end cap size
- 08403-6580
part number pricewt.
0.1 0.60
base components
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
25[ ]<02072
REV. 1.06
back panels
price height
56 61 86
38 51 56 61 66 71 86 96
38 51 56 61 66 71 86 96
width
30 30 30
36 36 36 36 36 36 36 36
48 48 48 48 48 48 48 48
08507-131408507-131508507-1318
08507-137208507-132208507-132408507-132508507-132608507-132708507-132808507-1330
08507-138108507-133208507-133408507-133508507-133608507-133708507-133808507-1340
part number pricewt.
9.310.315.1
7.210.111.212.413.614.718.120.5
9.613.515.116.618.219.724.427.5
34.6539.6057.35
22.5032.5534.8039.6045.1046.4557.3564.45
23.3033.7036.1041.4046.7048.0059.5066.95
• ¼" hardboard• Available in painted baked enamel• Specify paint color (30" in color 15 only)
perf back panels
height
51 56 61 66 71 86 96
51 56 61 66 71 86 96
51 56 61 66 71 86 96
51 56 61 66 71 86 96
width
36 36 36 36 36 36 36
48 48 48 48 48 48 48
36 36 36 36 36 36 36
48 48 48 48 48 48 48
-------
-------
-------
-------
part number pricewt.
27.229.832.435.137.841.047.3
36.239.743.346.850.454.563.9
42.646.750.955.159.364.375.7
56.962.367.973.479.185.599.2
-------
-------
-------
-------
• Painted finish, with or without steel T–slot inserts. T-slots 3" o.c.• ¾" MDF, unfinished on back side• Requires slatwall tie bar, see page 23• Specify paint color• Prices available upon request
slatwall backs
slatwall w/steel T–slot inserts
width
30 30 30
36 36 36 36 36 36 36 36
48 48 48 48 48 48 48 48
08507-1214 08507-1215 08507-1218
08507-1272 08507-1222 08507-1224 08507-1225 08507-1226 08507-1227 08507-1228 08507-1230
08507-1281 08507-1232 08507-1234 08507-1235 08507-1236 08507-1237 08507-1238 08507-1240
part number wt.
9.810.915.9
7.610.611.813.114.315.519.121.6
10.114.215.917.519.120.825.729.0
30.7533.9543.50
20.9028.6530.7533.9543.5047.1550.9561.25
21.1031.8034.0034.0044.3550.8056.5063.50
height
56 61 86
38 51 56 61 66 71 86 96
38 51 56 61 66 71 86 96
• ¼" hardboard,• Painted 1 face baked enamel• Specify paint color (30" only come in color 15)
solid back panels
height
96 96
08500-3250 08500-3251
part number wt.
31.0 32.6
47.4043.55
width
48 48
• Solid (3251) or perf (3250)• ¼" hardboard,• Painted 1 face baked enamel• Specify paint color
square cut back panels
back panels
price
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
26 [ ]> 02072
REV. 1.06
extender back panels
width
36363636
48484848
----
----
part number wt.
- - - -
- - - -
- - - -
- - - -
height
05 10 15 25
05 10 15 25
• ¾" MDF• Painted finish, with or without steel T–slot inserts. T-slots 3" o.c.• Requires slatwall tie bar, see page 23• Specify paint color• Prices available upon request
slatwall back panelsprice
05101525
05101525
width
36363636
48484848
08507-573608507-446808507-446908507-4471
08507-573708507-448108507-448208507-4484
part number wt.
1.12.33.45.8
1.53.14.67.7
- - - -
- - - -
height
• ¼" hardboard,• Painted 1 face baked enamel• Specify paint color• Prices available upon request
perf back panelspricepricewidth
36363636
48484848
08507-574208507-450708507-450808507-4510
08507-574308507-452008507-452108507-4523
part number wt.
1.22.43.66.1
1.63.24.98.1
- - - -
- - - -
height
05 10 15 25
05 10 15 25
• ¼" hardboard,• Painted 1 face baked enamel• Specify paint color• Prices available upon request
solid back panels
• Used to join 2-piece back panels• Colors available KM, 25,15,clear
H–channel size
30 36 48
08601-022308601-022408601-0225
part number pricewt.
.1
.1
.1
2.653.053.70
extender back panels
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
27[ ]<02072
REV. 1.06
• One piece shelf pan with 1¼” ticket moulding• Two–position brackets, level, 20° downslant• ½” Double row perforations 1” on center front and rear• See color chart for paint colors available• Textured steel• Must be ordered in quantities of 2
heavy duty 2–position shelf width
36 36 36
48 48 48
01347-223601347-243601347-2836
01347-224801347-244801347-2848
part number pricewt.
15.617.720.8
20.422.922.9
51.3057.4071.15
63.8071.1583.55
depth
22 24 28
22 24 28
load limits (lbs.)
600600600
36” 48”
600600600
shelfdepth
22 24 28
Load capacities listed represent themaximum evenly distributed weightthat is recommended for each shelf.Reduce capacities by 30% if onlythe front of the shelf is to be loaded.
• One piece shelf pan with 1¼” ticket moulding• Four–position brackets, 12° upslant, level, 15° & 30° downslant• ½” Double row perforations 1” on center front and rear• See color chart for paint colors available• Textured steel• Must be ordered in quantities of 4
standard 4–position shelf width
30 30 30 30 30
36363636363636
48484848484848
01346-103001346-123001346-143001346-163001346-1830
01346-103601346-123601346-143601346-163601346-183601346-203601346-2236
01346-104801346-124801346-144801346-164801346-184801346-204801346-2248
part number pricewt.
5.67.38.09.29.9
7.48.39.110.611.312.112.8
9.210.210.413.315.616.617.5
17.3521.0023.6026.9528.70
20.8023.1025.5529.6031.6034.7537.25
25.0527.8534.0036.0541.9045.4547.90
depth
10 12 14 16 18
10 12 14 16 18 20 22
10 12 14 16 18 20 22
load limits (lbs.)
30”
350500500500500 - -
400500500500500400350
36” 48”
400500500500500400350
shelfdepth
10 12 14 16 18 20 22
Load capacities listed represent the maximumevenly distributed weight that is recommended foreach shelf. Reduce capacities by 30% if only thefront of the shelf is to be loaded.
standard & heavy duty shelves
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
28 [ ]> 02072
REV. 1.06
• Chrome plated• 3” tall
3” wire fencing size
36 48
10 12 14 16 18
08303-006708303-0068
08303-007908303-008008303-008108303-008208303-0083
part number pricewt.
0.91.2
0.30.40.40.50.5
10.0011.50
5.005.005.005.506.00
front & back fencing
front to back fencing
• 7½” tall back• Usable space 3” less than the nominal shelf depth• Hooks into back row of perfs on shelf• Order shelves separately• See color chart for paint colors available
book shelf adapter size
36 48
08445-314008445-3141
part number pricewt.
14.719.2
18.4025.45
• Keeps shelves in alignment when heavy loads are on the shelf• Zinc finish
shelf key size
- 08410-0027
part number pricewt.
0.1 0.75
• 1” tall steel installs into the front row of perforations on the shelf• See color chart for paint colors available• Must be ordered in quantities of 10
product retainer size
30 36 48
08402-477108402-477208402-4773
part number pricewt.
0.80.91.0
5.055.807.15
shelving options
• 8” tall back• 8” deep• See color chart for paint colors available
book shelf size
36 48
08701-123008701-1212
part number pricewt.
- -
55.9557.45
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
29[ ]<02072
REV. 1.06
glass shelf brackets
support channel
glass top
silicone
• Specify left or right for brackets• Order 1 pair of brackets, 1 support channel, 1 glass top, & 1 tube of silicone per shelf asselmbly• 2 position brackets, level and 20° downslant
glass shelf components width
- -
- -
36 36 48 48
-
08401-0156R/L08401-0158R/L
08415-920408415-9208
16002-123616002-143616002-124816002-1448
00063-2025
part number pricewt.
.9
.9
1.31.8
9.810.111.513.4
1oz
10.1511.20
8.9010.05
33.0033.5037.5043.50
5.90
12 14
36 48
12 14 12 14
-
depth
• Specify left or right• Order same size as shelf• See color chart for available colors• Prices available upon request
basket/shelf brackets size
12141618202224
08706-0424R/L08706-0425R/L08706-0426R/L08706-0427R/L08706-0428R/L08706-0429R/L08706-0430R/L
part number pricewt.
1.5 1.9 2.1 2.3 2.5 2.7 2.9
- - - - - - -
• 8½” tall back, 6” sloped front• Chrome finish• Order wire dividers separately• Order brackets separately (see below)• Weight capacity on all sizes is 300 lbs., uniform load
endless wire basket width
363636
484848
- - -
08303-193508303-193408303-1933
08303-192808303-192708303-1926
08303-194608303-194508303-1944
part number pricewt.
8.18.59.0
9.810.811.5
0.91.11.3
- - -
- - -
- - -
12 14 16
12 14 16
12 14 16
depth
wire dividers
• Chrome finish• Order brackets separately (see below)• Weight capacity on all sizes is 150 lbs., uniform load
reversible wire shelves width
36363636
48484848
08303-195908303-195808303-195708303-1956
08303-195208303-195108303-195008303-1949
part number pricewt.
6.66.76.97.0
8.28.48.68.7
- - - -
- - - -
18 20 22 24
18 20 22 24
depth
shelving options
• Prices available upon request
• Prices available upon request
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
30 [ ]> 02072
REV. 1.06
base component color (025 or 013)
CEB 18 46 TG G 15 13
deck color (see color chart)
(L)leveled or (G)not leveled
(TG)trimguard or (TL)trimline
nominal length
nominal depth
contour end base
Example catalog part number
• Used at the end of a run• Shipped assembled• Designate paint color for deck and paint color for base parts.• See color chart for paint colors available• Add $9.80 per contour end base if leveled• Add $36.85 per contour end base for the trimguard option
contour end bases width
26
303030
343434
3838
4242
4646
CEB1426
CEB1430CEB1630CEB1830
CEB1434CEB1634CEB1834
CEB1838CEB2438
CEB1842CEB2442
CEB1846CEB2446
part number pricewt.
17.8
19.920.921.9
21.922.924.0
26.230.8
29.534.5
31.737.0
102.45
106.55113.85117.50
111.75116.70121.00
127.70141.65
139.30150.90
143.70158.25
depth
14
14 16 18
14 16 18
18 24
18 24
18 24
fits
12/12
14/14 14/14 14/14
16/16 16/16 16/16
18/18 18/18
20/20 20/20
22/22 22/22
contour end base
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
31[ ]<02073
REV. 1.06
• Used to secure feature end frame to end of run• 90° t–brace is used with feature end frame that is 5” shorter than the height of the run• Specify paint color
feature end frame hardware t–brace 90° t–brace
01611-033201611-0335
part number pricewt.
1.01.4
9.7513.20
• Used at the end of a run with or without a contour end base• Shipped assembled with one or two back panels.• Feature end frame hardware pack (sold separately) is required to attach frame to a standard gondola (see below).
feature end frameheight
515661667186
515661667186
515661667186
FE3051FE3056FE3061FE3066FE3071FE3086
FE3651FE3656FE3661FE3666FE3671FE3686
FE4851FE4856FE4861FE4866FE4871FE4886
part number pricewt.
17.919.120.221.424.326.1
19.420.521.722.923.927.6
22.323.524.725.826.830.5
82.40 86.80 89.85 95.10 93.70 109.70
86.45 90.85 93.90 99.15 101.35 113.75
93.80 98.20 101.25 106.50 108.70 121.10
width
30 30 30 30 30 30
363636363636
484848484848
exterior back panel color (see color chart)
FE 36 51 PP SO 15 15 15
feature end frame color (see color chart)
interior back panel (PP-Perf, SO-Solid, SW-Slatwall)
exterior back panel (PP-Perf, SO-Solid, SW-Slatwall)
nominal height
nominal width
feature end frame
Example catalog part number
interior back panel color (see color chart)
feature end frames
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
32 [ ]> 02073
REV. 1.06
• Required on feature end top rails
sign stem fitting - 08302-0002
part number pricewt.
- .50
size
• Used to secure feature end frame components together and secure feature end frames to gondolas• Must be ordered in quantities of 100
feature end frame hardware #10-24 x 1/2” PFH MS. 1/4”-20 x 1/2” TH screw
00060-106000060-1076
part number pricewt.
- -
.10 .10
description
• Used at the bottom of the feature end frame to secure the side rails and back panels as well as mount the feature end frame to the gondola run• Specify paint color (see color chart)
feature end frame bottom angle 30 36 48
08405-089108405-089208405-0893
part number pricewt.
- - -
15.05 17.65 22.00
size
• Rails priced individually• Specify paint color (see color chart)
feature end frame side rail 51 56 61 66 71 86
08800-235508800-235608800-235708800-235808800-235908800-2364
part number pricewt.
5.35.96.46.87.17.5
20.05 22.25 23.75 26.40 27.50 33.70
size
• Used at the top of the feature end frame to secure side channels and back panels• Specify paint color (see color chart)
feature end frame top channel 30 36 48
08403-839108403-839208403-8393
part number pricewt.
2.73.64.3
8.80 10.20 13.20
size
feature end frame components
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
33[ ]<02073
REV. 1.06
feature end frame back panels
pricewidth
303030303030
363636363636
484848484848
08583-305108583-305608583-306108583-306608583-307108583-3086
08583-365108583-365608583-366108583-366608583-367108583-3686
08583-485108583-485608583-486108583-486608583-487108583-4886
part number wt.
8.5 8.510.511.512.515.5
10.211.412.713.915.118.7
13.715.417.018.620.325.1
28.7030.5542.9548.5051.1063.80
33.6034.6544.9553.3554.4066.15
40.4543.9048.9555.0059.4067.50
depth
51 56 61 66 71 86
51 56 61 66 71 86
51 56 61 66 71 86
• ¼" hardboard,• Painted 2 faces baked enamel• Specify paint color
solid back panelspricewidth
303030303030
363636363636
484848484848
08582-305108582-305608582-306108582-306608582-307108582-3086
08582-365108582-365608582-366108582-366608582-367108582-3686
08582-485108582-485608582-486108582-486608582-487108582-4886
part number wt.
8.1 8.110.010.911.914.7
9.710.912.013.214.317.8
13.014.716.217.719.223.9
30.4032.5045.1550.7556.4065.65
34.4036.6547.1554.3057.9069.75
42.6545.9051.1057.2560.6575.60
depth
51 56 61 66 71 86
51 56 61 66 71 86
51 56 61 66 71 86
• ¼" hardboard• ¼" perforations spaced 1” o.c.• Painted 2 faces baked enamel• Specify paint color
perf back panelspricewidth
303030303030
363636363636
484848484848
- - - - - -
- - - - - -
- - - - - -
part number wt.
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
depth
51 56 61 66 71 86
51 56 61 66 71 86
51 56 61 66 71 86
• 3/4" MDF• Painted 2 faces baked enamel• T–slots are spaced 3” o.c.• Also available with steel T–slot inserts• Specify paint color• Prices available upon request
slatwall back panels
feature end frame back panels
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
34 [ ]> 02073
REV. 1.06
30 30
36 36
height
51 61
51 61
4F30514F3061
4F36514F3661
part number pricewt.
12.815.1
13.816.1
58.20 65.45
69.75 77.00
4–way feature end frameswidth
46” 54”
endframewidth
30” 36”
01346-103001346-1236
part number pricewt.
5.27.7
16.50 22.00
shelves
basesize
• Above reflects maximum suggested shelf sizes
4F 30 51 PP SO 15 15 15Example catalog part number
exterior back panel color (see color chart)
interior back panel (PP-Perf, SO-Solid, SW-Slatwall)
exterior back panel (PP-Perf, SO-Solid, SW-Slatwall)
interior back panel color (see color chart)
feature end frame color (see color chart)
nominal height
nominal width
4–way feature end frame
• 8 tek screws required per top panel
10-16 x 3/4” tek
46” 54”
endframewidth
30 36
08445-350908445-3510
00060-1370
part number pricewt.
7.38.0
-
45.85 57.75
-
metal top panel
basesize
hardware
46” 54”
endframewidth
30 36
08711-331608711-3317
part number pricewt.
85.885.8
548.05 548.05
wood base
basesize
• Available in (0KM) K6-dove gray, (0LA) K9-frosty white,(015) H8 antique white, (025) K7-black, and (PP) KR-almond• All bases are on casters
• Free–standing merchandising unit• Not shipped assembled• For a complete unit order:
1- 4–way base4- 4–way feature end frames1- Metal top panel8- 4–way back panels8- Tek screws8- 4–way anchor clips8- 10 x 5/8” PHA screw
4–way hardware
anchor clip fwd 10 x 5/8” PHA screw
08445-301600060-1123
part number pricewt.
.3 .1
3.10 .10
description
30 30
3636
3030
3636
height
51 61
51 61
51 61
51 61
08583-002008583-0022
08583-002508583-0027
08582-000108582-0003
08582-000608582-0008
part number pricewt.
8.510.5
10.312.7
8.110.0
9.810.1
28.70 42.95
33.60 44.95
30.40 45.15
34.40 47.15
4–way back panels
width
perf backs
solid backs
• Also available in slatwall with pricing available upon request
4–way
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
35[ ]<02073
REV. 1.06
50 71 86
08721-312308721-312508721-3131
part number pricewt.
- - -
770.20951.701024.35
glass door assemblyheight
• Sliding doors in aluminum frame• Size stated above is nominal frame size• Specify aluminum trim color: 95 (natural)
18 18 18
20 20 20
22 22 22
height
50 71 86
50 71 86
50 71 86
08721-335908721-336808721-3386
08721-336008721-338708721-3361
08721-336208721-337008721-3388
part number pricewt.
- - -
- - -
- - -
40.65 69.80 79.40
55.10 99.00 99.00
63.15 97.85 103.60
metal end panelswidth
security case hardware
hdwe pk sec hdwe pk sec ep gap filler strap
01611-043201611-043308603-343708445-1317
part number pricewt.
- - - -
2.05 5.15 6.85 6.45
description• For a complete unit order:
1- glass door assembly1- left metal end panel1- right metal end panel2- standard shelves (if placed ondeck only 1 shelf is required)1- hdwe pk sec1- hdwe pk sec ep2- straps1- gap filler
• More than one glass door assembly can be used with a single set of end panels
• Side panels for use on existing gondola or wallcase• Baked enamel paint finish, specify color• Specify left hand or right hand (i.e. 08721-3388L or R)• Do not order a metal end panel wider than the depth of the base deck on unit
security case components
48 48 48
width
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
36 [ ]> 02073
REV. 1.06
• Vinyl cover plate plugs hole in top cap• Receives stem of sign holder
cover plate size
- 08302-0593
part number pricewt.
0.1 0.50
• Drops into place at the top of the standard as an anchor for the top cap• Required on end gondolas receiving a feature end frame• Used to reinforce gondolas using casters
top cap bracket size
- 08415-0788
part number pricewt.
- 0.80
• Used to level gondola unit
leveler description
leveler j–nut retainer
08308-016408308-0237
part number pricewt.
- -
0.40 1.05
• Glides are used to protect flooring• Price reflects quantities of 100
glides description
standard glide bottom arm glide
01611-054101611-0540
part number pricewt.
- -
57.75 57.75
• Used to increase load capacity of deck by 500 lbs.• Placed midway between base brackets• Includes levelers
base bulkhead depth
20 08704-2131
part number pricewt.
3.3 18.90
accessories
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
37[ ]<02073
REV. 1.06
• U-channel standards attach to wall• Identical slotting as regular standards• Specify paint color
heavy duty wallmount standard size
86 96
01600-001301600-0014
part number pricewt.
8.49.3
29.85 33.05
• 7/8" depth• 1¼" slotting• Specify paint color
slimline wallmount standard size
41 86
01600-022101600-0227
part number pricewt.
2.04.5
15.3024.15
• Exposed above top cap• Slotting 1¼" on center• Super structure standard should be ordered 10" shorter than the gondola height• Specify paint color
super structure post size
45 60
08712-242908712-3024
part number pricewt.
5.56.9
42.5042.50
• Supports super structure standard internally between top cap and cross tie
super structure “u” bar size
56 61 66 71
08403-792808403-792908403-793008403-7931
part number pricewt.
2.02.02.22.4
8.50 9.00 9.55 10.05
• Secures super structure standard at desired height
super structure locking key size
- 08403-0091
part number pricewt.
0.1 .60
accessories
• For a complete super structure order:1- post1- “u” bar1- locking key
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
38 [ ]> 02073
REV. 1.06
contour end base hardware (per caster channel)
00060-1157 00060-1275 00060-1171 08308-0297 00060-1240
44222
.10
.10
.201.00.10
5/16-18 hexnutsplit lock washercapscrew 5/16-18”U–nut retainer 5/16”5/16 washer
part number priceqty.description
gondola hardware (per caster channel)
00060-1157 00060-1275 00060-1171 08308-0297 00060-1240 08445-1720
------
.10
.10
.201.15.104.00
5/16-18 hexnutsplit lock washercapscrew 5/16-18U–nut retainer 5/16”5/16 washerspacer plate
part number priceqty.description
caster channel size
30 34 38 42 46
36 48
08445-226808445-226908445-169308445-227008445-2271
08445-169308445-1692
part number pricewt.
2.83.33.74.24.7
3.75.1
14.0016.3010.6018.5519.45
11.1515.40
contour end base channels
gondola channels
• 1 left and 1 right caster brace is required per caster channel
caster brace size
- -
08445-2559L08445-2559R
part number pricewt.
2 2
4.754.75
• Two casters per channel are required for gondola starter units and contour end bases• Only one caster per channel is required for gondola add–on units
caster size
- T8308-0280
part number price wt.
1.0 9.20
• 3 caster channels are required per full gondola• 2 caster channels are required per half gondola• 1 caster channel is required per contour end base
caster components
caster hardware
• For a complete caster assembly order:1- caster channel1- left and right caster brace2- castersMinimum required hardware (see right)
• Visit www.streater.com and review the caster assembly instructions for required hardware on gondola fixtures.
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
39[ ]<02073
REV. 1.06
• Painted top cap anchor grips wallcase top cap & is fastened to the wall• Zinc finish• Fasteners not included
top cap anchor bracket size
- 08403-2001
part number pricewt.
0.2 1.35
• Anchor secures upright or bottom arm leveler leg to the floor, using customer supplied anchor bolts.• Must be used when shelving unit exceeds a height– to–depth ratio of 6:1• Available in color 025 (black) only• Fasteners not included• Must be ordered in quantities of 10
upright & bottom arm tie down size
- 08415-4724
part number pricewt.
0.2 8.40
• Straps center bottom arm to the floor• 12 ga. steel, zinc finish• Fasteners not included
center bottom arm tie down size
- 08403-6143
part number pricewt.
0.1 .85
• Ties the end bottom arm to the floor from inside base area, not seen when unit is assembled• 12 ga. steel, zinc finish• Fasteners not included
end bottom arm tie down size
- 08403-6442
part number pricewt.
0.1 1.70
• Grips the verticle edge of standard and is fastened to the wall• 12 ga. steel, zinc finish• Fasteners not included
standard wall tie bracket size
- 08403-0789
part number pricewt.
0.2 1.00
accessories
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
40 [ ]> 02073
REV. 1.06
• Matches metal cornice front• See color chart for available colors• Prices available upon request
metal cornice return size
16”-25”25”-35”
- -
part number pricewt.
8.9 10.2
- -
• Used to attach metal cornice to a shelf top• 2 brackets are required per starter unit• 1 bracket is required per add–on unit• Prices available upon request
metal cornice shelf mount bracket size
- 08800-1869
part number price wt.
2.3 -
• 8” high with 3” bottom flange• Flanges at each end for connecting segments• See color chart for available colors• Prices available upon request
metal cornice front size
364886
- - -
part number pricewt.
6.710.020.0
- - -
telescoping cornice bracket
• Hooks into upright• Telescopes 20” to 34”• See color chart for available colors• For each L/R bracket order 1 Tip (08706-0033) and 1 screw (00060-1123)
size
- - -
-
08706-0032R08706-0032L08706-0033
00060-1123
part number pricewt.
2.0 2.0 1.1
.1
51.95 51.95 24.30
.10hardwareL/R bracket
(08706-0032) Tip(08706-0033)
cornice
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
41[ ]<02073
REV. 1.06
pricewidth
48484848
01606-047901606-048301606-048701606-0491
part number wt.
- - - -
59.9565.2569.5573.95
depth
1 3 6 8
• Specify paint color
cross bar
• Available in colors listed only• Available in aerosal only
touch–up paint description
015–decor white 0PP–platinum plus 0KM–dove gray 013–dark bronze 025–black 0LA–frosty white 0MT–liberty red
00014-318300014-319300014-318900014-318500014-318600014-319600014-3190
part number pricewt.
12 oz 12 oz 12 oz 12 oz 12 oz 12 oz 12 oz
42.45 42.45 42.45 42.45 42.45 42.45 42.45
• 1 position• Specify right or left
flange bracket size
10141822
08401-0188R/L08401-0189R/L08401-0190R/L08401-0191R/L
part number pricewt.
1.2 1.7 2.2 2.6
10.95 14.85 16.25 18.55
• Brackets in 12” and 14” depths• Chrome plated rod• For each R/L bracket order 2 screws (00060-1507)• For each hangrod order two end caps (08301-0152)
hangrod assembly size
1214
3648
- -
01602-0075R/L01602-0076R/L
08301-030908301-0310
00060-150708301-0152
part number pricewt.
- -
- -
- -
13.95 13.95
21.70 21.70
0.20 1.05
hangrod
hardware
accessories
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
42 [ ]> 02073
REV. 1.06
• Starters include wire grid, 2 end caps and top and bottom mounting channels• Add–ons include wire grid, vertical channel grid support, and top and bottom mounting channels• 96” units includes vertical channel grid support• Color 0LA (white) baked enamel only
WireFlex™ wall height
848484
848484
01105-000101105-000201105-0003
01105-000901105-001001105-0011
part number pricewt.
- - -
- - -
299.70372.25731.10
281.70354.25713.10
width
32 48 96
32 48 96
starter
add–on
• Islands include wire grid, 2 end panels and 2 top and bottom mounting channels.• 64" & 80" kits include vertical channel grid support• Solid painted panel or WireFlex panel available to insert into metal end panels; order separately• Color (0LA) white baked enamel finish• Optional base decks available for side(s) and/or end(s); not necessary for support of island
WireFlex™ island height
84848484
84
84
-
01105-000401105-000501105-001601105-0006
01105-0008
01105-0007
01610-2250
part number pricewt.
- - - -
-
-
-
766.70900.001316.301437.60
47.45
223.60
10.20
width
32 48 64 80
18
18
-
island
solid end cap back panel
wire end cap back panel
levelers
WireFlex™
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
43[ ]<02073
REV. 1.06
• 7” deep• Color LA (white)
WireFlex™ base deck size
163248
08445-206308445-206408445-2065
part number pricewt.
- - -
20.7033.9548.65
• 1¼” on center slotting• Color LA (white)
wallmount standard height
15 01600-0216
part number pricewt.
- 11.25
• Fits Ultra uprights• Wires spaced 1” apart• 12” tall• Color LA (white)
WireFlex™ speedwall size
3648
08709-439808709-4390
part number pricewt.
- -
165.15179.50
• 7” deep• Color LA (white)• Must be ordered in quantities of 12
WireFlex™ shelf size
16 08445-2092
part number pricewt.
- 12.50
WireFlex™ components
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
44 [ ]> 02073
REV. 1.06
• Attaches to speedwall and WireFlex™
akro bin size
11x8x711x11x15
11x8x7
08302-194308302-1970
08302-1945
part number pricewt.
- -
-
22.7022.70
23.80
blue
white
• Attaches to reinforced crossbar• Color LA (white)
vial cap bin size
6”x10” 08445-2111
part number pricewt.
- 24.70
• Attaches to reinforced crossbar• Color LA (white)• Prices available upon request
telephone tray size
12”x12” -
part number pricewt.
- -
• Fits on wallmounts and regular standards• Color LA (white)
reinforced crossbar size
3648
08709-442108709-4422
part number pricewt.
- -
152.80176.25
• Attaches to reinforced crossbar• Color LA (white)• Prices available upon request
monitor tray size
16”x18” -
part number pricewt.
- -
• Divides tray into smaller sections• Clear acrylic• Prices available upon request
tray divider size
-
-
08302-1867
08302-1868
part number pricewt.
-
-
-
-
channel track
divider
WireFlex™ accessories
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
45[ ]<02074
REV. 1.06
1. Double bottle bay end panels two per module
2. Double bottle bay top one per module
3. Double bottle bay bottom one per module
4. Back panel one per module
5. Single bottle bay panels two per module (finished and unfinished)
6. Single bottle bay top one per module
7. Single bottle bay bottom one per module
8. Single bottle bay base cover one per module
9. Single bottle bay back brace one per module
10. Hardware pack one per module
2
1
3
4
5
6
4
78
9
bottle bay components
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
46 [ ]> 02074
REV. 1.06
• Height: 85-1/4"• Depth: 15"• All steel construction, LA (frosty white)• Steel end unfinished• Melamine overlay end panels available
double bottle bay end panels size
85 08415-0661
part number pricewt.
15.4 317.00
• Unit widths: 24", 28-5/16", 36", 43-11/16"• Depth: 15"• All steel construction, 025 (black)
double bottle bay bottom size
24293644
08415-066508415-066408415-066308415-0662
part number pricewt.
11.311.311.315.0
98.00 114.50 102.00 110.00
• Unit widths: 24", 28-5/16", 36", 43-11/16"• Depth: 15"• All steel construction, 0LA (frosty white)
double bottle bay top size
24293644
08415-066908415-066808415-066708415-0666
part number pricewt.
6.07.59.012.0
71.50 74.50 96.00 117.00
• Available in sizes for single and double bottle bays, as well as 2 single bottle bays back-to-back• Height: 85¼"• Color: LA (Frosty White)
bottle bay backs size
1524293644
41223-158208507-000608507-000708507-000508507-0008
part number pricewt.
9.314.216.220.625.0
20.00 39.70 40.70 54.25 59.80
bottle bay components
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
47[ ]<02074
REV. 1.06
• Height: 85-1/4"• Depth: 7¾”• All steel construction, LA (frosty white)• Steel end unfinished• Melamine overlay end panels available
single bottle bay end panels size
85 24156-0000R/L
part number pricewt.
8.5 199.00
• Depth: 7¾”• All steel construction, 25 (black)
single bottle back brace size
1524293644
24153-001524153-002424153-002924153-003624153-0044
part number pricewt.
2.31.51.92.33.0
28.5034.5036.0044.5048.00
• Depth: 7¾”• All steel construction, LA (frosty white)
single bottle bay bottom size
1524293644
24151-001524151-002424151-002924151-003624151-0044
part number pricewt.
2.93.85.05.77.5
28.00 38.50 47.50 51.00 60.00
• Depth: 7¾”• All steel construction, LA (frosty white)
single bottle bay top size
1524293644
24152-001524152-002424152-002924152-003624152-0044
part number pricewt.
1.93.03.74.97.4
28.00 43.50 42.00 46.50 66.00
bottle bay components
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
48 [ ]> 02074
REV. 1.06
• Height: 85-1/4"• K9 (frosty white melamine)• Melamine construction• Order eight (8) screws per end panel
bottle bay overlay end panels style
singledouble
screws
43417-088543417-1585
00060-1108
part number pricewt.
14.421.0
.1
108.60134.70
.10hardware
• Order 1 hardware pack per module
bottle bay hardware pack size
- 01610-2287
part number pricewt.
.3 15.55
• All steel construction, LA (frosty white)
bottle bay shelves size
1524293644
01207-000101207-000201207-000301207-000401207-0005
part number pricewt.
1.11.82.12.73.2
5.55 8.20 8.95 10.80 13.80
• All steel construction, 25 (black)
single bottle bay base cover style
single 24229-0000
part number pricewt.
.6 10.50
bottle bay components
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
49[ ]<02074
REV. 1.06
• Customize with any accessory
basic open unit size
- 08726-0001
part number pricewt.
57.8 430.05
waste cabinent size
- 08726-0079R/L
part number pricewt.
71.2 528.85
• Specify R/L hand door
• Includes 2 adjustable shelves
dual shelf cabinet size
- 08726-0005
part number pricewt.
71.2 488.80
under counter cabinets
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
50 [ ]> 02074
REV. 1.06
• Includes adjustable shelf
locked drawer cabinet size
- 08726-0007
part number pricewt.
100.3 700.15
• Specify R/L hand door• Includes adjustable shelf• All handles are included
drawer & half door cabinet size
- 08726-0009R/L
part number pricewt.
- 815.25
4 drawer accessory cabinet size
- 08726-0004
part number pricewt.
81.4 1374.15
under counter cabinets
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
51[ ]<02074
REV. 1.06
• Specify R/L hand door• Does not include sink
sink cabinet size
- 08726-0023R/L
part number pricewt.
111.8 567.15
• Printer drawer is longer to allow greater extension of the drawer• Printer shelf is 22½” wide and 28” deep
printer cabinet size
- 08726-0022
part number pricewt.
161.6 885.60
• Top drawer includes lock
5 drawer accessory cabinet size
- 08726-0012
part number pricewt.
- 1427.80
under counter cabinets
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
52 [ ]> 02074
REV. 1.06
• 12” wide• CPU pull–out drawer available
half modular cabinet size
- 08726-0011
part number pricewt.
241.2 412.80
• Full extension slides allow easy access to back of printer
printer pullout cabinet size
- 08726-0021
part number pricewt.
203.7 885.60
• Each drawer has 4 adjustable dividers
3 drawer vial/bottle cabinet size
- 08726-0024
part number pricewt.
169.2 1439.85
under counter cabinets
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
53[ ]<02074
REV. 1.06
• Completely closed back
3 drawer locked narcotics cabinet size
- 08726-0015R/L
part number pricewt.
151.4 1264.10
• 4 bottom drawers divided into 3 sections with card follower system• Top drawer includes lock
5 drawer RX cabinet size
- 08726-0013
part number pricewt.
132.8 2282.60
• 30” tall; 28” wide; 11” deep• 2 adjustable shelves
over sink cabinet size
- 08726-0016
part number pricewt.
147.4 597.05
under counter cabinets
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
54 [ ]> 02074
REV. 1.06
• 30” wide, 13/16” thick• 2–2½” diameter holes spaced 12” from each end• Gromet covers included• High pressure laminate J3 (frosty white)• Sides machined for easy assembly
counter top size
8’10’
08711-307408711-3075
part number pricewt.
51.564.4
439.00484.70
adjustable shelf size
- 08522-0400
part number pricewt.
8.3 68.40
• 30” deep, 42” tall• High pressure laminate J3 (frosty white)• Used to finish off a run of cabinets that do not terminate at a wall
high rise end panel size
- 08500-7331
part number pricewt.
21.4 229.70
• 4” high, 13/16” thick• High pressure laminate J3 (frosty white)• Top edge laminated
backsplash size
8’10’
08726-002708726-0028
part number pricewt.
7.08.6
113.55128.55
under counter accessories
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
55[ ]<02074
REV. 1.06
back room components & information
This system is designed for hand loading only.PLEASE NOTE: Personnel must be provided withsafe access to all elevations of storage equipment ordisplay fixtures via ladders, stairways or other means,in accordance with applicable OSHA regulations. Inno case should anyone be allowed to climb or standon storage or display equipment.
PRICES AVAILABLE UPON REQUEST
outrigger system
The slimline upright and shelf support of Streater'sbackroom storage shelving system offers easyassembly, strength and durability at an economicalprice. Factory assembled uprights,7/8" wide, are slotted on the sides to receive the shelfsupports. Interchangeable front and rear shelf supportsprotect the edge of the shelf and are adjustable on 1¼"increments. The particle board shelf may be removedor replaced without removing the shelf supports.
Local codes concerning fire regulations, sanitationregulation and /or seismic certifications may apply tosome installations. Check with your local buildingauthorities to determine what codes, if any, mayapply.
backroom system
PRICES AVAILABLE UPON REQUEST
stre
ater
inc.
41
1 so
uth
first
ave
nue
albe
rt le
a, m
n 56
007
80
0.52
7.41
97
ww
w.s
treat
er.c
om s
ales
info
@st
reat
er.c
om
56 [ ]> 02074
REV. 1.06
PRICES AVAILABLE UPON REQUEST
This system is designed for hand loading only.PLEASE NOTE: Personnel must be provided withsafe access to all elevations of storage equipment ordisplay fixtures via ladders, stairways or other means,in accordance with applicable OSHA regulations. Inno case should anyone be allowed to climb or standon storage or display equipment.
widespan
outrigger & widespan