Embed Size (px)
Citation preview
UDDEHOLM ELMAX SUPERCLEAN3
SS-EN ISO 9001SS-EN ISO 14001
This information is based on our present state of knowledge and is intended to provide generalnotes on our products and their uses. It should not therefore be construed as a warranty ofspecific properties of the products described or a warranty for fitness for a particular purpose.
Classified according to EU Directive 1999/45/ECFor further information see our “Material Safety Data Sheets”.
Edition 4, 03.2007The latest revised edition of this brochure is the English version,which is always published on our web site www.uddeholm.com
UDDEHOLM ELMAX
3
ApplicationsNew types of engineering plastics, with highfiller contents, place greater demands on thetooling material, in terms of wear resistanceand corrosion resistance. Uddeholm Elmax hasbeen specially developed for high-tech applica-tions. These include products within theelectronic industry such as connectors, plugs,switches, resistors, integrated circuits, etc.Uddeholm Elmax can also be used in the foodprocessing industry, where a combination ofcorrosion resistance and wear resistance isrequired for cutting applications.
PropertiesPhysical dataHardened and tempered to 58 Rockwell C.
Temperature (20°C) (200°C) (400°C)68°F 392°F 752°F
Densitykg/m3 7 600 7 560 7 500lbs/in. 0,275 0,273 0,271
Modulus of elasticityN/mm2 230 000 210 000 200 000psi 33,4 x 106 30,5 x 106 29,0 x 106
Coefficient ofthermal expansion
per °C from 20°C – 10,6 x 10-6 11,4 x 10-6
per °F from 68°F – 6,0 x 10-6 6,4 x 10-6
Thermal conductivity*W/m °C – 15 21Btu in/ft2 h °F – 104 146
Specific heatJ/kg °C 460 – –Btu/lb °F 0,110 – –
* Thermal conductivity is difficult to measure. The scatter may be as high as ±15%.
Corrosion resistanceMoulds made from Uddeholm Elmax will havegood resistance to corrosion when mouldingcorrosive plastics under normal productionconditions.
GeneralUddeholm Elmax is a high chromium-vanadium-molybdenum-alloyed steel with thefollowing characteristics:• High wear resistance• High compressive strength• Corrosion resistant• Very good dimensional stability.
High wear resistance is normally connected tolow corrosion resistance and vice versa. InUddeholm Elmax it has however been able toachieve this unique combination of propertiesby a powder-metallurgy-based production.
Uddeholm Elmax offers a possibility to makelong-life, lowmaintenance moulds for the bestoverall moulding economy.
Typical C Si Mn Cr Mo Vanalysis % 1,7 0,8 0,3 18,0 1,0 3,0
Deliverycondition Soft annealed approx. 280 Brinell
Colour code Blue/black
Compressive strengthThe figures are to be considered approximate.
Hardness 60 RC 55 RC 50 RC
Compressivestrength Rm
N/mm2 3 000 2 700 2 300tsi 195 175 150psi 435 000 390 000 335 000
Yield pointRp0,2
N/mm2 2 300 2 150 1 800tsi 150 140 120psi 335 000 310 000 260 000
UDDEHOLM ELMAX
4
CoolingCurveNo.
HardnessHV 10
800–500
(sec)T
Air cooling ofbars, Ø mm
1 10 100 1 000 10 000 100 000 Seconds
1 10 100 1 000
1 10 100 Hours
0.2 1.5 10 90 600
Minutes
1100
1000
900
800
700
600
500
400
300
200
100
°C2000
1800
1600
1400
1200
1000
800
600
400
200
°F
1
2
3
4
5
6
792
782
690
665
542
360
1
28
140
630
1030
2095
Austenitizing temperature 1050°CHolding time 30 min.
Ms
Mf654
= 960°C
= 890°CsAc
321
Pearlite
Bainite
A 1c
Heat treatmentSoft annealingProtect the steel and heat through to 980°C(1800°F), holding time 2h. Then cool in furnace20°C (40°F)/h to 850°C (1560°F). Holdingtime 10h. Cool slowly to 750°C (1380°F).Then freely in air.
Stress-relievingAfter rough machining the tool should beheated through to 650°C (1200°F), holdingtime 2 hours. Cool slowly to 500°C (930°F)then freely in air.
HardeningPreheating temperature: 600–850°C (1110–1560°F).Austenitizing temperature: 1050–1100°C (1920–2010°F), normally 1080°C(1980°F).
Temperature Holding* Hardnesstime before
°C °F minutes tempering
1050 1920 30 60 HRC1080 1980 30 61 HRC1100 2010 30 61 HRC
* Holding time = time at austenitizing temperature after the tool is fully heated through
Protect the part against decarburization andoxidation during hardening.
TemperingChoose the tempering temperature accordingto the hardness required by reference to thetempering graph. Temper twice with inter-mediate cooling to room temperature. Lowesttempering temperature 180°C (360°F). Hold-ing time at tempering temperature minimum2 hours.
CCT-GRAPH
Austenitizing temperature 1050°C (1920°F). Holding time 30 minutes.
TEMPERING GRAPH
65
60
55
50
45
40
35
30
1050°C(1920°F)
200 400 600 800°C 390 750 1110 1470°F
Tempering temperature 2 x 2h
Retained austenite1050°C (1920°F)
Hardness, HRC Retained austenite %
1100°C (2010°F)
6
4
2
Austenitizingtemp.
UDDEHOLM ELMAX
5
Quenching media• Forced air/gas• Fluidized bed or salt bath 200–550°C
(390–1020°F), then cool in air.
Note: In order to obtain optimum properties,the cooling rate should be as fast as is con-comitant with acceptable distortion. Temperimmediately the tool reaches 50–70°C (120–160°F).
Dimensional changesduring heat treatment
ILLUSTRATION OF THE EFFECTFROM AUSTENITIZING TEMPERATUREAND SUBZERO COOLING
The test has been performed on sample size:40 x 40 x 40 mm (1,6 x 1,6 x 1,6 in.).
Austenitizing: 1050°C (1920°F) 1050°C (1920°F)30 min 30 min
Quenchingmedium: air air
Sub-zerotreatment: – -60°C (-75°F)
Tempering: 230°C (440°F) 2h + 2h 230°C (440°F) 2h + 2h
%
Mould for tape-cassettes with inserts ofUddeholm Elmax.
Sub-zero treatmentParts requiring maximum dimensional stabilityshould be sub-zero treated as volume changesotherwise may arise.
Immediately after quenching the pieceshould be sub-zero treated to between -40°Cto -120°C (-40°F to -180°F) followed bytempering. Treatment for 1–3 hours will give ahardness increase of 1–3 HRC.
Avoid intricate shapes as there is a risk ofcracking.
A tool for injection moulding of a camera part. Insertmould material; Uddeholm Elmax, plastic moulded;Polycarbonate (30% GR).
L W T L W T
0,150
0,125
0,100
0,075
0,050
0,02512341234
1234123123
12341234
123123
12341234
12341234After
hardening After hardeningand tempering
UDDEHOLM ELMAX
6
MachiningrecommendationsThe machining recommendations below are tobe considered as guiding values which must beadapted to existing local conditions.
Turning
Type of end mill
CarbideCutting data Solid indexable High speedparameters carbide insert steel
Cuttingspeed (vC)
m/min. 50–60 80–110 5–81)
f.p.m. 165–195 265–360 16–261)
Feed (fZ)mm/tooth 0,01–0,22)0 0,06–0,22)0 0,01–0,32)0in/tooth 0,0003–0,0082) 0,002–0,0082) 0,0003–0,0122)
Carbidedesignation
ISO – K15, P10–P20 –US C2, C7–C6
Coated3)
carbide
1) For coated HSS end mill vc = 14–16 m/min. (46–52 f.p.m.)2) Depending on radial depth of cut and cutter diameter3) Use a wear resistant Al2O3 coated carbide grade
Drill diameter Cutting speed (vc) Feed (f)mm inch m/min. f.p.m. mm/r i.p.r.
– 5 –3/16 10–12* 33–39* 0,05–0,15 0,002–0,006 5–10 3/16–3/8 10–12* 33–39* 0,15–0,20 0,006–0,008 10–15 3/8–5/8 10–12* 33–39* 0,20–0,25 0,008–0,010 15–20 5/8–3/4 10–12* 33–39* 0,25–0,35 0,010–0,014
DrillingHIGH SPEED STEEL TWIST DRILLS
* For coated HSS drills vC = 18–20 m/min. (60–65 f.p.m.)
CARBIDE DRILLS
Type of drill
Cutting data Indexable Solid Brazedparameters insert carbide carbide1)
Cuttingspeed (vC)
m/min. 90–120 60–80 30–35f.p.m. 295–395 195–265 98–115
Feed (f)mm/r 0,05–0,252) 0,10–0,252) 0,15–0,252)
i.p.r. 0,002–0,012) 0,004–0,012) 0,006–0,012)
1) Drills with internal cooling channels and brazed carbide tip2) Depending on drill diameter
Milling with carbide
Cutting data parameters Rough milling Fine milling
Cutting speed (vC)m/min. 80–110 110–140f.p.m. 265–360 360–460
Feed (fZ)mm/tooth 0,2–0,4 0,1–0,2in/tooth 0,008–0,016 0,004–0,008
Depth of cut (ap)mm 2–4 –2in 0,08–0,16 0,08
Carbide designationISO K20, P20 K15, P10US C2, C6 C2, C7
Coated* Coated*carbide carbide
* Use a wear resistant Al2O
3 coated carbide grade
MillingFACE AND SQUARE SHOULDER MILLING
END MILLING
Soft annealed HardenedType of grinding condition condition
Face grindingstraight wheel A 46 HV B 151 R50 B31)
A 46 GVFace grindingsegments A36 GV A 46 GV
Cylindrical grinding A 60 KV B 151 R50 B31)
A 60 JV
Internal grinding A 60 JV B 151 R75 B31)
A 60 IV
Profile grinding A 100 IV B 126 R100 B61)
A 100 JV
1) If possible use CBN wheels for this application
GrindingA general grinding wheel recommendation isgiven below. More information can be found inthe Uddeholm brochure “Grinding of ToolSteel”.
Turning with Turning withcarbide high speed
Cutting data steelparameters Rough turning Fine turning Fine turning
Cuttingspeed (vc)
m/min. 70–120 120–140 10–14f.p.m. 230–395 395–460 33–46
Feed (f)mm/r 0,2–0,4 0,05–0,2 0,05–0,2i.p.r. 0,008–0,016 0,002–0,008 0,002–0,008
Depthof cut (ap)
mm 2–4 0,5–2 0,5–3inch 0,08–0,16 0,02–0,08 0,02–0,12
Carbidedesignation
ISO K20, P10–P20 K15, P10 –US C2, C7–C6 C2, C7
Coated* Coated*carbide carbide
* Use a wear resistant Al2O
3 coated carbide grade
UDDEHOLM ELMAX
7
Propertycomparison chart
Further informationPlease contact your local Uddeholm officefor further information on the selection, heattreatment, application and availability ofUddeholm tool steels.
Uddeholm Wear Corrosion Dimensionalsteel grade resistance resistance stability
ELMAX
RIGOR
STAVAX
Electrical-dischargemachiningIf EDM’ing, (“spark-erosion”) is performed inthe hardened and tempered condition the toolshould then be given an additional temper atabout 20°C (50°F) below the previous temper-ing temperature.
A mould for production of connectors.Uddeholm Elmax is used as insert material.
UDDEHOLM ELMAX
8
EuropeAustriaRepresentative officeUDDEHOLMAlbstraße 10DE-73765 NeuhausenTelephone: +49 7158 9865-0www.uddeholm.de
BelgiumUDDEHOLMEuropark Oost 7B-9100 Sint-NiklaasTelephone: +32 3 780 56 20www.uddeholm.be
CroatiaBÖHLER UDDEHOLM Zagrebd.o.o za trgovinuZitnjak b.b10000 ZagrebTelephone: +385 1 2459 301Telefax: +385 1 2406 790www.bohler-uddeholm.hr
Czech RepublicBÖHLER UDDEHOLM CZ s.r.o.Division UddeholmU Silnice 949161 00 Praha 6, RuzyneTelephone: +420 233 029 850,8www.uddeholm.cz
DenmarkUDDEHOLM A/SKokmose 8, BramdrupdamDK-6000 KoldingTelephone: +45 75 51 70 66www.uddeholm.dk
EstoniaUDDEHOLM TOOLING ABSilikatsiidi 7EE-11216 TallinnTelephone: +372 655 9180www.uddeholm.ee
FinlandOY UDDEHOLM ABRitakuja 1, PL 57FI-01741 VANTAATelephone: +358 9 290 490www.uddeholm.fi
FranceHead officeUDDEHOLMZ.I. de Mitry-Compans, 12 rue Mercier,FR-77297 Mitry Mory CedexTelephone: +33 (0)1 60 93 80 10www.uddeholm.fr
Branch officesUDDEHOLM S.A.77bis, rue de VesoulLa Nef aux MétiersFR-25000 BesançonTelephone: +33 (0)381 53 12 19
LE POINT ACIERSUDDEHOLM - Aciers à outilsZ.I. du Recou, Avenue de ChamplevertFR-69520 GRIGNYTelephone: +33 (0)4 72 49 95 61
LE POINT ACIERSUDDEHOLM - Aciers à outilsZ.I. Nord 27, rue François RochaixFR-01100 OYONNAXTelephone: +33 (0)4 74 73 48 66
GermanyHead officeUDDEHOLMHansaallee 321DE-40549 DüsseldorfTelephone: +49 211 5351-0www.uddeholm.de
Branch officesUDDEHOLMFalkenstraße 21DE-65812 Bad Soden/TSTelephone: +49 6196 6596-0
UDDEHOLMAlbstraße 10DE-73765 NeuhausenTelephone: +49 7158 9865-0
UDDEHOLMFriederikenstraße 14bDE-06493 HarzgerodeTelephone: +49 39484 727 267
Great BritainUDDEHOLM DIVISIONBOHLER-UDDEHOLM (UK) LIMITEDEuropean Business ParkTaylors Lane, OldburyGB-West Midlands B69 2BNTelephone: +44 121 552 5511Telefax: +44 121 544 2911www.uddeholm.co.uk
GreeceSTASSINOPOULOS-UDDEHOLMSTEEL TRADING S.A.20, Athinon StreetGR-Piraeus 18540Telephone: +30 210 4172 109www.uddeholm.gr
SKLERO S.A.Heat Treatment and Trading of SteelUddeholm Tool SteelsIndustrial Area of ThessalonikiP.O. Box 1123GR-57022 Sindos, ThessalonikiTelephone: +30 2310 79 76 46www.sklero.gr
HungaryUDDEHOLM TOOLING/BOKDunaharaszti, Jedlik Ányos út 25HU-2331 Dunaharaszti 1. Pf. 110Telephone/fax:+36 24 492 690www.uddeholm.hu
IrelandHead office:UDDEHOLM DIVISIONBOHLER-UDDEHOLM (UK) LIMITEDEuropean Business ParkTaylors Lane, OldburyUK-West Midlands B69 2BNTelephone: +44 121 552 5511Telefax: +44 121 544 2911www.uddeholm.co.ukDublin:Telephone: +353 1845 1401
ItalyUDDEHOLMDivisione della Bohler UddeholmItalia S.p.A.Via Palizzi, 90IT-20157 MilanoTelephone: +39 02 39 49 211www.uddeholm.it
LatviaUDDEHOLM TOOLING LATVIA SIAPiedrujas Street 7LV-1035 RigaTelephone: +371 7 702133Telefax: +371 7 185079
Branch officeUDDEHOLMBarrio San Martín de Arteaga,132Pol.Ind. TorrelarragoitiES-48170 Zamudio (Bizkaia)Telephone: +34 94 452 13 03
SwedenHead officeUDDEHOLM TOOLING SVENSKA ABAminogatan 25SE-431 53 MölndalTelephone: +46 31 67 98 50www.uddeholm.se
Branch officesUDDEHOLM TOOLING SVENSKA ABBox 45SE-334 21 AnderstorpTelephone: +46 371 160 15
UDDEHOLM TOOLING SVENSKA ABBox 148SE-631 03 EskilstunaTelephone: +46 16 15 79 00
UDDEHOLM TOOLING SVENSKA ABAminogatan 25SE-431 53 MölndalTelephone: +46 31 67 98 70
UDDEHOLM TOOLING SVENSKA ABNya Tanneforsvägen 96SE-582 42 LinköpingTelephone: +46 13 15 19 90
UDDEHOLM TOOLING SVENSKA ABDerbyvägen 22SE-212 35 MalmöTelephone: +46 40 22 32 05
UDDEHOLM TOOLING SVENSKA ABHonnörsgatan 16ASE-352 36 VäxjöTelephone: +46 470 457 90
SwitzerlandHERTSCH & CIE AGGeneral Wille Strasse 19CH-8027 ZürichTelephone: +41 44 208 16 66www.hertsch.ch
TurkeyHead officeASSAB Korkmaz Celik A.S.Organize Sanayi Bölgesi2. Cadde No: 26 Y. DudulluUmraniye-Istanbul TurkeyTelephone: +90 216 420 1926-121/124www.assabkorkmaz.com
LithuaniaUDDEHOLM TOOLING ABBE PLIENAS IR METALAIT. Masiulio 18BLT-52459 KaunasTelephone: +370 37 370613, -669www.besteel.lt
The NetherlandsUDDEHOLMIsolatorweg 30NL-1014 AS AmsterdamTelephone: +31 20 581 71 11www.uddeholm.nl
NorwayUDDEHOLM A/SJernkroken 18Postboks 85, KalbakkenNO-0902 OsloTelephone: +47 22 91 80 00www.uddeholm.no
PolandBOHLER UDDEHOLM POLSKASp. z.o.o./Co. Ltd.ul. Kolejowa 291, Dziekanów Polski,PL-05-092 LomiankiTelephone: +48 22 429 2260, -203, -204www.uddeholm.pl
PortugalF RAMADA Aços e Industrias S.A.P.O. Box 10PT-3881 Ovar CodexTelephone: +351 256 580580www.ramada.pt
RomaniaBÖHLER-UDDEHOLM Romania SRLAtomistilor Str. No 96-102077125 - com. Magurele, Jud. Ilfov.Telephone: +40 214 575007Telefax: +40 214 574212
RussiaUDDEHOLM TOOLING CIS9A, Lipovaya Alleya, Office 509RU-197183 Saint PetersburgTelephone: +7 812 6006194www.uddeholm.ru
SlovakiaBohler-Uddeholm Slovakia s.r.o.divizia UDDEHOLMCsl.Armády 5622/5SK-036 01 MartinTelephone: +421 (0)434 212 030www.uddeholm.sk
SloveniaRepresentative officeUDDEHOLMDivisione della Bohler UddeholmItalia S.p.A.Via Palizzi, 90IT-20157 MilanoTelephone: +39 02 39 49 211www.uddeholm.it
SpainHead officeUDDEHOLMGuifré 690-692ES-08918 Badalona, BarcelonaTelephone: +34 93 460 1227www.acerosuddeholm.com
ˇ
UDDEHOLM ELMAX
9
AmericaArgentinaACEROS BOEHLER UDDEHOLM S.AMozart 401619-Centro Industrial GarinGarin-Prov.AR-Buenos AiresTelephone: +54 332 7444 440www.uddeholm.com.ar
BrazilAÇOS BOHLER-UDDEHOLM DOBRASIL LTDA– DIV. UDDEHOLMEstrada Yae Massumoto, 353CEP 09842-160BR-Sao Bernardo do Campo - SP BrazilTelephone: +55 11 4393 4560, 4554www.uddeholm.com.br
CanadaHead Office & WarehouseUDDEHOLM2595 Meadowvale Blvd.Mississauga, ON L5N 7Y3Telephone: +1 905 812 9440www.bucanada.com
Branch WarehousesUDDEHOLM3521 Rue AshbySt. Laurent, QC H4R 2K3Telephone: +1 514 333 8000
UDDEHOLM730 Eaton Way - Unit #10New Westminister, BC V3M 6J9Telephone: +1 604 525 3354
Heat TreatingTHERMO-TECH2645 Meadowvale Blvd.Mississauga, ON L5N 7Y4Telephone: +1 905 812 9440
ColombiaAXXECOL S.A.Carrera 35 No 13-20Apartado Aereo 80718CO-Bogota 6Telephone: +57 1 2010700www.axxecol.com
ASTECO S.A.Carrera 54 No 35-12Apartado Aereo 663CO-MedellinTelephone: +57 4 2320122www.asteco.com
Dominican RepublicRAMCA, C. POR A.Luis Puigbó Alegre, EPS P-2289P O Box 02-5261DO-Santo DomingoTelephone: +1 809 682 [email protected]
EcuadorIVAN BOHMAN C.A.Apartado 1317Km 6 1/2 Via a DauleGuayaquilTelephone: +593 42 254111
IVAN BOHMAN C.A.Casilla Postal 17-01370QuitoTelephone: +593 2 2248001
El SalvadorACAVISA DE C.V.25a. Avenida Sur 463zona 1Apartado Postal 439SV-San SalvadorTelephone: +503 22 711700www.acavisa.com
GuatemalaIMPORTADORA ESCANDINAVAApartado postal 2042GT-Guatemala CityTelephone: +502 23 [email protected]
MexicoHead officeACEROS BOHLER UDDEHOLM S.A.de C.V.Calle Ocho No 2, Letra ”C”Fraccionamiento Industrial Alce BlancoC.P. 52787 Naucalpan de JuarezMX-Estado de MexicoTelephone: +52 55 9172 0242www.bu-mexico.com
Branch officeBOHLER-UDDEHOLM MONTERREY,NUEVO LEONLerdo de Tejada No.542Colonia Las VillasMX-66420 San Nicolas de Los Garza,N.L.Telephone: +52 81 83 525239
PeruC.I.P.E.S.AAv. Oscar R. Benavides(ante Colonial) No. 2066PE-Lima 1Telephone: +51 1 336 [email protected]
U.S.A.Head OfficeUDDEHOLM4902 Tollview DriveRolling Meadows IL 60008Telephone: 1-847-577-2220Sales phone: 1-800-638-2520www.bucorp.com
Region East WarehouseUDDEHOLM220 Cherry StreetShrewsbury MA 01545
Region Central WarehouseUDDEHOLM548 Clayton Ct.Wood Dale IL 60191
Region West WarehouseUDDEHOLM9331 Santa Fe Springs RoadSanta Fe Springs, CA 90670
VenezuelaPRODUCTOS HUMAR C.A.Multicentro Empresarial del Este,Edf Libertador, Núcleo A.Piso 9, Of. A-93, ChacaoVE-Caracas 1060Telephone: +58 212 [email protected]
Other Countries in AmericaASSAB INTERNATIONAL ABBox 42SE-171 11 Solna, SwedenTelephone: +46 8 564 616 70www.assab.se
Asia & PacificAustraliaBOHLER UDDEHOLM Australia129-135 McCredie RoadGuildford NSW 2161Private Bag 14AU-SydneyTelephone: +61 2 9681 3100www.buau.com.au
BangladeshASSAB INTERNATIONAL ABP.O. Box 17595Jebel AliAE-DubaiTelephone: +971 488 12165www.assab.se
North ChinaHead officeASSAB Tooling (Beijing) Co LtdNo.10A Rong Jing Dong JieBeijing Economic Development AreaBeijing 100176, ChinaTelephone: +86 10 6786 5588www.assabsteels.com
Branch officesASSAB Tooling (Beijing) LtdDalian Branch8 Huanghai Street, Haerbin RoadEconomic & Technical Develop. DistrictDalian 116600, ChinaTelephone: +86 411 8761 8080
ASSAB Qingdao OfficeRoom 2521, Kexin MansionNo. 228 Liaoning Road, Shibei DistrictQingdao 266012, ChinaTelephone: +86 532 8382 0930
ASSAB Tianjin OfficeNo.12 Puwangli Wanda XinchengXinyibai Road, Beichen DistrictTianjin 300402, ChinaTelephone: +86 22 2672 0006
Central ChinaHead officeASSAB Tooling Technology(Shanghai) Co LtdNo. 4088 Humin RoadXinzhuang Industrial ZoneShanghai 201108, ChinaTelephone: +86 21 5442 2345www.assabsteels.com
Branch officesASSAB Tooling Technology(Ningbo) Co LtdNo. 218 Longjiaoshan RoadVehicle Part Industrial ParkNingbo Economic & Technical Dev.ZoneNingbo 315806, ChinaTelephone: +86 574 8680 7188
ASSAB Tooling Technology(Chongqing) Co LtdPlant C, Automotive Industrial lParkChongqing Economic & TechnologicalDevelopment ZoneChongqing 401120, ChinaTelephone: +86 23 6745 5698
South ChinaHead officeASSAB Steels (HK) LtdRoom 1701–1706Tower 2 Grand Central Plaza138 Shatin Rural Committee RoadShatin NT - Hong KongTelephone: +852 2487 1991www.assabsteels.com
Branch officesASSAB Tooling (Dongguan) Co LtdNorthern DistrictSong Shan Lake Science & TechnologyIndustrial ParkDongguan 523808, ChinaTelephone: +86 769 2289 7888www.assabsteels.com
ASSAB Tooling (Xiamen) Co LtdFirst Floor Universal WorkshopNo. 30 Huli ZoneXiamen 361006, ChinaTelephone: +86 592 562 4678
Hong KongASSAB Steels (HK) LtdRoom 1701-1706Grand Central Plaza, Tower 2138 Shatin Rural Committee RoadShatin NT, Hong KongTelephone: +852 2487 1991www.assabsteels.com
IndiaASSAB Sripad Steels LTDT 303 D.A.V. ComplexMayur Vihar Ph I ExtensionIN-Delhi-110 091Telephone: +91 11 2271 2736www.assabsripadsteels.com
ASSAB Sripad Steels LTD709, Swastik ChambersSion-Trombay RoadChemburIN-Mumbai-400 071Telephone: +91 22 2522-7110, -8133
ASSAB Sripad Steels LTDPadmalaya TowersJanaki AvenueM.R.C. NagarIN-Chennai-600 028Telephone: +91 44 2495 2371
IndonesiaHead officePT ASSAB Steels IndonesiaJl. Rawagelam III No. 5Kawasan Industri PulogadungJakarta 13930, IndonesiaTelephone: +62 21 461 1314www.assabsteels.com
Branch officesSURABAYA BRANCHJl. Berbek Industri 1/23Surabaya Industrial Estate, RungkutSurabaya 60293, East Java, IndonesiaTelephone: +62 31 843 2277
MEDAN BRANCHKomplek Griya Riatur IndahBlok A No.138Jl. T. Amir HamzahHalvetia Timur, Medan 20124Telephone: +62 61 847 7935/6
BANDUNG BRANCHKomp. Ruko Bumi KencanaJl. Titian Kencana Blok ENo.5 Bandung 40233Telephone: +62 22 604 1364
TANGERANG BRANCHPusat Niaga CibodasBlok C No. 7 TangerangTelephone: +62 21 921 9596, 551 2732
SEMARANG BRANCHJl. Imam Bonjol No.155R.208 Semarang 50124Telephone: +62 358 8167
UDDEHOLM ELMAX
10
IranASSAB INTERNATIONAL ABP.O. Box 19395IR-1517 TEHRANTelephone: +98 21 888 35392www.assabiran.com
IsraelPACKER YADPAZ QUALITYSTEELS LtdP.O. Box 686Ha-Yarkon St. 7, Industrial ZoneIL-81106 YAVNETelephone: +972 8 932 8182www.packer.co.il
JapanUDDEHOLM KKAtago East Building3-16-11 Nishi ShinbashiMinato-ku, Tokyo 105-0003, JapanTelephone: + 81 3 5473 4641www.assabsteels.com
JordanENGINEERING WAY Est.P.O. Box 874Abu AlandaJO-AMMAN 11592Telephone: +962 6 [email protected]
MalaysiaHead officeASSAB Steels (Malaysia) Sdn BhdLot 19, Jalan Perusahaan 2Batu Caves Industrial Estate68100 Batu CavesSelangor MalaysiaTelephone: +60 3 6189 0022www.assabsteels.com
Branch officesBUTTERWORTH BRANCHPlot 146aJalan Perindustrial Bukit Minyak 7Kawasan Perindustrial Bukit Minyak14000 Bukit Mertajam, SPT PenangTelephone: +60 4 507 2020
JOHOR BRANCHNo. 8, Jalan Persiaran TeknologiTaman Teknologi81400 SenaiJohor DT, MalaysiaTelephone: +60 7 598 0011
New ZealandVIKING STEELS25 Beach Road, OtahuhuP.O. Box 13-359, OnehungaNZ-AucklandTelephone: +64 9 270 1199www.ssm.co.nz
PakistanASSAB International ABP.O. Box 17595Jebel AliAE-DubaiTelephone: +971 488 12165www.assab.se
PhilippinesASSOCIATED SWEDISH STEELSPHILS Inc.No. 3 E. Rodriguez Jr., AvenueBagong Ilog, Pasig CityPhilippinesTelephone: +632 671 1953/2048www.assabsteels.com
Republic of KoreaHead officeASSAB Steels (Korea) Co Ltd116B-8L, 687-8, Kojan-dongNamdong-kuIncheon 405-310, KoreaTelephone: +82 32 821 4300www.assabsteels.com
Branch officesBUSAN BRANCH14B-5L, 1483-9, Songjeong-dongKangseo-ku, Busan 618-270, KoreaTelephone: +82 51 831 3315
DAEGU BRANCHRoom 27, 7-Dong2 FIndustry Materials Bldg.1629Sangyeog-Dong, Buk-KuKorea-Daegu 702-710Telephone: +82 53 604 5133
LebanonWARDE STEEL & METALS SARL METCharles Helou Av, Warde BldgP.O. Box 165886LB-BeirutTelephone: +961 1 [email protected]
Saudi ArabiaASSAB INTERNATIONAL ABP.O. Box 255092SA-Riyadh 11353Telephone: +966 1 [email protected]
SingaporeHead office PacificASSAB Pacific Pte Ltd171, Chin Swee RoadNo. 07-02, SAN CentreSG-Singapore 169877Telephone: +65 6534 5600www.assabsteels.com
JurongASSAB Steels Singapore (Pte) Ltd18, Penjuru CloseSG-608616 SingaporeTelephone: +65 6862 2200
Sri LankaGERMANIA COLOMBO (Ptd ) Ltd451/A Kandy RoadLK-KelaniyaTelephone: +94 11 2913556www.iwsholdings.com
SyriaWARDE STEEL & METALS SARL METCharles Helou Av, Warde BldgP.O. Box 165886LB-BeirutTelephone: +961 1 [email protected]
TaiwanHead officeASSAB Steels (Taiwan) Co LtdNo. 112 Wu Kung 1st Rd.Wu Ku Industry ZoneTW-Taipei 248-87, Taiwan (R.O.C.)Telephone: +886 2 2299 2849www.assabsteels.com
Branch officesNANTOU BRANCHNo. 10, Industry South 5th RoadNan Kang Industry ZoneNantou 540-66, Taiwan (R.O.C.)Telephone: +886 49 225 1702
TAINAN BRANCHNo. 180, Yen He Street,Yong Kang CityTainan 710-82, Taiwan (R.O.C.)Telephone: +886 6 242 6838
ThailandASSAB Steels (Thailand) Ltd9/8 Soi Theedinthai,Taeparak Road, Bangplee,Samutprakarn 10540, ThailandTelephone: +66 2 385 5937,+66 2 757 5017www.assabsteels.com
United Arab EmiratesASSAB INTERNATIONAL ABP.O. Box 17595Jebel AliAE-DubaiTelephone: +971 488 12165www.assab.se
VietnamCAM Trading Steel Co Ltd90/8 Block 5, Tan Thoi Nhat WardDistrict 12, Ho Chi Minh CityVietnamTelephone: +84 8 5920 920www.assabsteels.com
Other AsiaASSAB INTERNATIONAL ABBox 42E-171 11 Solna, SwedenTelephone: +46 8 564 616 70www.assab.se
AfricaEgyptUNITED FOR IMPORT ANDINDUSTRIAL SUPPLIESMontaser Project No 20Flat No 14Al Ahram Street-El TabiaEG-Giza CairoTelephone: +20 2 7797751www.assab.se
KenyaSANDVIK Kenya LtdP.O. Box 18264Post code 00500KE-NairobiTelephone: +254 20 532 [email protected]
South AfricaUDDEHOLM Africa (Pty.) Ltd.P.O. Box 539ZA-1600 Isando/JohannesburgTelephone: +27 11 974 2781www.bohler-uddeholm.co.za
TunisiaMCM Distribution4 Bis, Rue 8610 - Z.I.2035 Chargula 1TN-TunisTelephone: + 216 71 802479www.mcm.com.tn
ZimbabweRepresentative office:UDDEHOLM Africa (Pty.) Ltd.P.O. Box 539ZA-1600 Isando/JohannesburgTelephone: +27 11 974 2781www.bohler-uddeholm.co.za
Other African CountriesASSAB INTERNATIONAL ABBox 42SE-171 11 Solna, SwedenTelephone: +46 8 564 616 70www.assab.se
www.assab.com www.uddeholm.com www.uddeholm.com 11
Network of excellenceUddeholm is present on every continent. This ensures you
high-quality Swedish tool steel and local support wherever you
are. Assab is our wholly-owned subsidiary and exclusive sales
channel, representing Uddeholm in various parts of the world.
Together we secure our position as the world’s leading supplier
of tooling materials.
HA
GFO
RS KLARTEX
T U0703X
X.X
XX
/ TRYC
KERI KNA
PPEN, KA
RLSTAD
2007XX
XX
X
Uddeholm is the world’s leading supplier of tooling materials. This
is a position we have reached by improving our customers’ everyday
business. Long tradition combined with research and product develop-
ment equips Uddeholm to solve any tooling problem that may arise.
It is a challenging process, but the goal is clear – to be your number one
partner and tool steel provider.
Our presence on every continent guarantees you the same high quality
wherever you are. Assab is our wholly-owned subsidiary and exclusive
sales channel, representing Uddeholm in various parts of the world.
Together we secure our position as the world’s leading supplier of
tooling materials. We act worldwide, so there is always an Uddeholm
or Assab representative close at hand to give local advice and support.
For us it is all a matter of trust – in long-term partnerships as well as in
developing new products. Trust is something you earn, every day.
For more information, please visit www.uddeholm.com or www.assab.com
