GREEN #50WITH LOCKCOAT

RED #55WITH LOCKCOAT

CREAM #57WITH LOCKCOAT

GRAY #56WITH LOCKCOAT

CHARCOALWITH LOCKCOAT

CREAMWITH LOCKCOAT

REDWITH LOCKCOAT

GRAYWITH LOCKCOAT

HHPP//QQ

HHPP

CREAM

CHARCOAL

GRAY RED GREEN

HHFF

CREAM

CHARCOAL

GRAY RED GREEN

MMFF

Actual color and texture of the UCRETE products may vary slightly from the samples shown on thisbrochure. Make final approvals from physical samples. The final color of the UCRETE installed interioror exterior, may darken or shift under exposure to UV light, but the performance of the product will notbe affected.

UCRETE COLORSUCRETE COLORS

THE ONE, THE ONLY, THE ORIGINAL... FOR OVER 30 YEARS

UCRETE SYSTEMSUCRETE SYSTEMS

FOOD PROCESSING PHARMACEUTICAL REFRIGERATION/MEAT PACKING BEVERAGE, SPIRITS & DISTILLERIESINDUSTRIAL

STANDS UP TO AGGRESSIVE CLEANING TECHNIQUES

UCRETE Systems can be exposed to severe

daily cleaning techniques, including live steam,

hot water, aggressive detergents and

disinfectants.

OFFERS PROTECTION FROMTHERMAL SHOCK

UCRETE is unaffected by freeze/thaw cycles

and withstands extreme temperature ranges

while in service and during cleaning. Unlike

other flooring systems, UCRETE won’t

delaminate due to thermally induced stresses.

MAXIMIZED SKID INHIBITION

UCRETE’s surface profile can be adjusted to

provide varying degrees of skid inhibition.

Specify UCRETE HF For...• Medium to heavy duty application thickness of

(6mm - 10mm) 1/4” to 3/8”• Areas subject to mechanical cleaning• Environments under constant chemical attack• Service temperatures of -45ºC to 112ºC (-50ºF to 235ºF)• Areas requiring slip resistance even when wet• Areas where cleanliness and hygiene are important

Specify UCRETE HP for...• Medium duty application thickness of (6mm) 1/4”• Environments requiring slip resistance even where wet

processing occurs• Service temperatures of -45ºC to 100ºC (-50ºF to 210ºF)• Environments subject to chemical attack

Specify UCRETE MF For...• Light to medium duty application thickness from

(4mm - 6mm) 3/16” to 1/4”• For continuous exposures below (93ºC) 200ºF• Areas where surfaces must be smooth and easily cleaned • Can be upgraded to enhance skid inhibiting surface texture• Ideal for clean rooms and powder production areas

Specify UCRETE WR For...• Minimum vertical/base application thickness of nominal

(4mm) 3/16”• Vertical base applications• Areas subject to temperature ranges of (-45ºC) -50ºF to

(104ºC) 220ºF (System #1)• Steep slopes

Specify UCRETE HP/Q For...• Nominal application thicknesses of (6mm) 1/4”• Areas where aesthetics are of importance• Service temperatures of -45ºC to 100ºC (-50ºF to 210ºF)• Areas where cleanliness and hygiene are important

(an additional lockcoat should be added)

VERTICAL TROWEL GRADE

HORIZONTAL TROWEL GRADE

HORIZONTAL BROADCAST GRADE

HORIZONTAL FLOWABLE GRADE

UCRETE® PRODUCT SELECTOR GUIDE

Horizontal Horizontal Horizontal VerticalTrowel Flowable Broadcast TrowelGrade Grade Grade Grade

Ucrete HF Ucrete MF Ucrete HP & HP/Q Ucrete WR

CHEMICAL RESISTANT

UCRETE Systems have been resisting damage

from caustics, organic and inorganic acids,

solvents and most other commonly used

chemicals for over 30 years.

WON’T CHIP OR SPALL

Unlike mortar jointed quarry tile and acid brick,

UCRETE Seamless Systems absorb direct

impact blows by distributing the loads

throughout the system.

RESISTS THE GROWTH OF BACTERIA AND FUNGI

UCRETE Systems pass ASTM G 21 and

independent laboratory tests confirm that

UCRETE will not support the growth of E.coli or

salmonella bacteria.

ELIMINATES GROUT JOINTS -VIRTUALLY SEAMLESS!

UCRETE has no grout joints to crack or harbor

dirt or bacteria, resulting in a cleaner, safer

production environment.

VIRTUALLY ODOR FREE

UCRETE’s low odor makes it possible to keep

adjacent work spaces open during installation

and cure.

LASTS LONGER AND INSTALLSFASTER

The combination of faster turnaround times

and minimized downtime with a proven track

record of long-term performance creates

superior per square foot value versus many

other flooring systems.

PRIMARY RECOMMENDATION

SECONDARY RECOMMENDATION

ULTIMATE PERFORMANCE ACHIEVED USING UCRETE WR ON COVES AND VERTICAL SURFACES.

UCRETE® PHYSICAL AND MECHANICAL PROPERTIES

PROPERTIES TEST UCRETE UCRETE UCRETE UCRETEMETHOD HF HP&HP/Q MF WR

COMPRESSIVE ASTM C 579 7,300 psi 8,128 psi 6,700 psi 7,000 psiSTRENGTH

50.3 MPa 56 MPa 46.2 MPa 48.3 MPa

FLEXURAL ASTM C 580 1,800 psi 2,325 psi 2,600 psi 2,200 psiSTRENGTH

12.4 MPa 16 MPa 17.9 MPa 15.2 MPa

TENSILE ASTM C 307 800 psi 880 psi 1,000 psi 1,000 psiSTRENGTH

5.5 MPa 6.0 MPa 6.9 MPa 6.9 MPa

MODULUS OF ASTM C 580 1.7x 10-S psi 1.7x 10-S psi 1.5x 10-S psi 1.7x 10-S psiELASTICITY

1170 MPa 1170 MPa 1030 MPa 1170 MPa

COEFFICIENT OF ASTM C 531 1.1 x 10-S °F 1.5 x 10-S °F 2.2 x 10-S °F 1.1 x 10-S °FTHERMALEXPANSION 2.0 x 10-S °C 2.7 x 10-S °C 4.0 x 10-S °C 2.0 x 10-S °C

WATER ASTM C 413 <0.1% <0.1% <0.1% <0.1%ABSORPTION

THERMAL ASTM C 179 8 Btu 6.78 Btu 6 Btu 6 BtuCONDUCTIVITY in./Ft2-h- OF in./Ft2-h- OF in./Ft2-h- OF in./Ft2-h- OF

1.2 W/mK 1.0 W/mK .9 W/mK 2.08 W/mK

DENSITY ASTM C 905 130 lb/ft3 130 lb/ft3 123 lb/ft3 130 lb/ft3

2.08 g/cm3 2.08 g/cm3 1.97 g/cm3 2.08 g/cm3

RESISTANCE *ASTM G 21 1 1 1 1TO FUNGIGROWTH

* Scale of 1 to 4, 1 Being Least Growth

Animal - Housing/Cage W ash

Baker y Floors

Batter y Char ging Rooms

Beverage, Spirits & Distilleries

Cafeterias/Food Pr ep & Ser vices

Chemical Pr ocessing/Refineries

Cleanr ooms

Containment Ar eas

Cor r ectional Facilities

Dairies - Milk Pr ocess Ar eas

Food Pr ocessing & Meat Packing

Fr eezer & Coolers

Laboratories

Laundries

Lockers & Shower Rooms

Manufacturing/Light Duty

Manufacturing/Heavy Duty

Meat, Fish, Poultr y Packing

Phar maceutical Manufacturing

Plating, Pickling & Etching

Printing (Inks & Dyes)

Pulp & Paper Pr ocessing

Restaurant Kitchens

T .V . Studios

W ar ehouses

RED HF

RED HP

RED HP/Q

RED MF

WR

The OnlySolutionto Long-Term

DurabilityThe Only

Solutionto Long-Term

Durability

TestResults

YOUR AUTHORIZED INSTALLER

A network of trained and approved contractorsexperienced in the installation of UCRETESystems are on your side, committed to qualityand owner satisfaction. This international groupof contractors, in conjunction with professionalarchitects and engineers, ensure that UCRETESystems are installed right the first time.

This chart clearly exhibits that thecoefficient of thermal expansion of Ucreteis very close to concrete in comparison toanother commonly used flooring material.Under thermal cycling conditions, Ucreteexpands and contracts very similar toconcrete which virtually eliminatesdifferential flexing that occurs with othermaterials and allows Ucrete to maintainunmatched tenacious adhesion toconcrete.

This chart demonstrates the Tg phase for the samematerials. Some materials will undergo physicalchange when exposed to thermal cycling conditionsand this repetitive change weakens adhesion at thebond line increasing the likelihood of delamination.Materials that change in modulus during thermalcycling - becoming more fluid under heat and brittlein cold temperatures - create a stress thatrepetitively works against the adhesive bond toconcrete. Ucrete remains solid-like and consistentthroughout thermal cycling and, as a result, is notsubject to these related physical stresses thatfrequently lead to delamination and adhesive failureof a flooring system.

UCRETE exceeds ADA requirements for slipresistance .5 as to ASTM 2047

COEFFICIENT OF THERMAL EXPANSION

GLASS TRANSITION

COEFFICIENT OF FRICTIONThermal shock conditions can wreak havoc onthe adhesion of coatings and toppings toconcrete. Coefficient of Thermal Expansion andGlass Transition (Tg) both provide meaningfuldata with which to evaluate the ability of amaterial to remain bonded to concrete in thesetough conditions.

ExpertInsta

llations

Form 64050

THE ONE, THE ONLY, THE ORIGINAL...FOR OVER 30 YEARS

Developed and patented in Europe, UCRETE technology is the original system of its type designed for monolithic floor

overlays and resurfacing. For more than a quarter century UCRETE has been protecting millions of square

feet of concrete substrates around the world.

Engineered as a superior alternative to acid brick, quarry tile and coatings, UCRETE offers unequalled resistance to physicalabuse, thermal shock, a wide range of aggressive chemicals and

bacteria growth.

UCRETE floors offer time proven performance,something our long list of satisfied customers can attest to. The

technology and application technique has been perfected with yearsof experience. Our experience is available through our knowledgeable

sales and service team and a trained approved contractor network.This full service team will work in partnership to solve your problems

and create peace of mind in your flooring decisions.

For maximum durability, protection and performance,specify ‘The Floor That Lasts’ ... specify UCRETE.

THE UCRETE ADVANTAGES...• Long-term durability• Thermal shock resistance• High impact resistance• Stands up to aggressive cleaning• No joints to harbor bacteria• Maximum wear resistance• Low odor during installation• Virtually seamless• Self-priming • Rapid cure/fast installation • Chemical resistance• Skid inhibiting• Regulatory agency approvals• Over 30 years of proven performance

UCRETE ON VERTICAL SURFACE (WR)

NO GROUT JOINTS

SLIP RESISTANT SURFACE

NO JOINTS OR SEAMS AT DRAIN

CONCRETE

BASF Building Systems

889 Valley Park DriveShakopee, MN 55379

www.BASFBuildingSystems.com

Customer Service 800-433-9517Technical Service 800-243-6739