UC3 Settings ControlsUC3.1 Samples & Report TypeControl Label Note

Show Combined Sample Selection of any Samples check box enables Report Type option buttons below.Sample [ref n]

Sample [ref n + 1] etc

Control Label NoteModular Report Selection enables all controls in

UC3.2, 3.3, 3.4.

Basic Diagnostic Report Selection enables certain controls in UC3.2, 3.3, 3.4 [to be defined]Detailed Diagnostic Report

[Other reports to be defined]

Check Box 1.1Check Box 1.2Check Box 1.3

Option Button 1.1

Option Button 1.2Option Button 1.3Option Button 1.n etc

Check Box 1.n

UC3.2 CompositionControl Label Note

Text box 2.1(and slider?)

% Element Displayed as 'Other'.

Minimum % Element to group and display as 'Other' elements. Range 0.1% to 5%.

1% Element Display Precision

Decimal rounding for display/ export of element results.

0.1% Element Display Precision

Decimal rounding for display/ export of element results.

Precise Element Display Precision

Decimal rounding for display/ export of element results.

Sample Assay Select to produce table of total sample element composition.

Compare External Assay Select to produce table of total sample element composition including column to compare external assay data (if data present, otherwise check box disabled).

Composition Key Phase Select to produce one table of average composition per key phase.

Composition All Phases Select to produce one table per sample of average phase composition for all phases. Element values for each phase concatenated with separator.

Deportment Select to produce table and chartof deportment.

Use External Assay Use external assay data for calculation of deportment (if datapresent, otherwise check box disabled).

Key Elements 'Element 1' Select from an inclusive list of elements in a project those for which detailed deportment data or grade / recovery data will be calculated and reported.

Key Elements 'Element 2' etc

Check Box 2.1

Option Button 2.1

Option Button 2.2

Option Button 2.3

Check Box 2.2

Check Box 2.3

Check Box 2.4

Check Box 2.5

Check Box 2.7

Check Box 2.n etc

Check Box 2.6

UC3.3 Liberation / AssociationControl Label Note

1% Phase Display Precision Decimal rounding for display/ export of phase abundance.

0.1% Phase Display Precision

Decimal rounding for display/ export of phase abundance.

Precise Phase Display Precision

Decimal rounding for display/ export of phase abundance.

Text box 3.1(and slider?)

Liberated Particle Threshold Minimum 50%, max 100%.Default 95%, 1% increments.

Text box 3.2(and slider?)

Minimum Association Settings

Minimum 0%, max 10%.Default 2%, 0.5% increments.

Association By Particle Size Select to produce table/ chart of summary association by particle size.

Text box 3.3 Particle Size Class Integer value to define particle size class. Default 50 microns.

Detailed Association Select to produce table/ chart of detailed association.

Liberation Select to produce table/ chart of cumulative liberation yield.

Key Phases 'Phase 1' Check box per phase in the project for which if selected detailed data on liberation & association will be calculated & reported.

Key Phases 'Phase 2' etc

Option Button 3.1

Option Button 3.3

Check Box 3.1

Check Box 3.2

Check Box 3.3

Check Box 3.4

Check Box 3.n etc

Option Button 3.2

UC3.4 SizeSamples Label Note

Occurrence Statistics Select to produce table of morphometric statisitics

Cumulative Size Distribution Select to produce table and/or chart of grain/ particle size distribution

Undersize Curve Plot undersize or oversize curve.

Oversize Curve Plot undersize or oversize curve.

Key Phases 'Phase 1' Check box per phase in the project for which if selected cumulative size distribution data will be calculated & reported.

Key Phases 'Phase 2' etc

Check Box 4.1

Check Box 4.2

Option Button 4.1

Check Box 4.3

Check Box 4.n etc

Option Button 4.2

Check Box 1: 1: Yes2: Yes3: Offn: Off

Option Button 1: 1: Off

2: Off

3: Off

n: Off

Check Box 2: 1: Off2: Off3: Off4: Off5: Yes7: Offn: Off6: Off

Text Box 2: 1:

Option Button 2: 1: Off

2: Off

3: Off

Option Button 3: 1: Off

3: Off

2: Off

Check Box 3: 1: Off2: Off3: Off4: Offn: Off

Text Box 1: Text Box 1_2: Text Box 1_3: Check Box 4: 1: Off2: Off3: Offn: Off

Option Button 4: 1: Off

2: Off