u miniBRS · circuit). Abrasive is contained in the pressure vessel for blasting. After or during blast operation, the abrasive is recovered in the reclaim hopper using the system’s

www.twrs.comToll Free: 800.621.2777Email: [email protected]

miniBRSCompact, powerful system is comfortable, easy to use and requires no containment

The Schmidt miniBRS is a compact and easily maneuverable abrasive blasting system that blasts and then recovers spent abrasive, contaminants and dust in the same step, eliminating the need for containment. The system can also be used to blast and then vacuum abrasive independently.

It handles a wide range of recyclable abrasives with ease, including steel grit. It is designed to deliver powerful performance over a range of blasting pressures, operating on just a 185 cfm compressor. The operator can blast and recover at up to 200 feet away from the miniBRS.

An ergonomic design, lightweight yet durable blast head and system-matched hoses make this system especially easy and comfortable to use. This greatly reduces operator fatigue and provides higher productivity.

Features:•150 psi-rated, 0.3 cu. ft. pressure vessel with

integral media screen•Blast pressure regulator •75 cfm eductor (pneumatic vacuum pump)•Airwash reclaimer•Secondary cyclonic dust separator•Dustcollectorwithpolyesterfiltercartridge•Differentialpressuregaugeonthedustcollectortoalertoperatortocleanfilter

•Blowdownwandforcleaningfilter•25' by 1/2" blast hose assembly•25' by 2" vacuum hose•Blast and recover head assembly with No. 3

nozzle•TVII abrasive metering valve (tungsten carbide

sleeve)

800-231-2085 SchmidtAbrasiveBlasting.com

A product of Axxiom Manufacturing, Inc.


About the miniBRS:The miniBRS is designed to blast and vacuum recover abrasive media for reuse, reducing or eliminating the need for containment. The system can blast and vacuum abrasive independently, or blast and vacuum at the same time (closed circuit). Abrasive is contained in the pressure vessel for blasting. After or during blast operation, the abrasive is recovered in the reclaim hopper using the system’s vacuum. Small particles are carried by the vacuum air stream through the reclaimer, through the secondary cyclone and then into the dust collector. The reusable abrasive is retained in the abrasive reclaimer and dropstothebottomofthereclaimhopper.Largeparticles(paintchips,etc.)are trapped by the abrasive screen. Abrasive is reloaded from the reclaim hopper for reuse when the blast vessel is depressurized.

Additional Features:•Complete system includes everything needed to blast, recover

contaminants and handle dust and debris. Just add abrasive and compressed air

•Quick set-up. Compact and easy to move•Lightweightworkheadreducesfatigueandhelpsensure

correct positioning of the blast head against the substrate•System-matched, small diameter blast and vacuum hoses are lighter and easier to handle•Includes the industry-leading TVII abrasive metering valve, ComboValve and Auto Air valve •Easy-access port to remove large debris from screen•Optional electric deadman blast controls feature the G2E deadman Specifications:Blastpattern: 3/4" to 7/8" using a No. 3 nozzleMaximum working pressure: 150 psig at 250 °F (10.3 bar at 121 °C)Blast hose size: 25', 1/2" diameter hoseVacuum hose size: 25', 2" diameter hoseElectrical requirements: 12 VDC (for optional electric deadman blast controls)Abrasivecapacity: Blastvessel-0.3cu.ft.(8.5L)Reclaimhopper-0.3cu.ft.(8.5L)Vacuum system: Pneumatic vacuum pump (eductor) Dustcollectorfilter: 6"diameter,drypoly-bondWeight: 335 lbs/152 kg; 450 lbs/205 kg with controls Dimensions: 60"Hx22"Wx34"LVideo:See our miniBRS video online at SchmidtAbrasiveBlasting.com or on YouTube.

Axxiom Manufacturing, Inc. is the manufacturer of Schmidt products. Certain products manufactured by Axxiom areprotectedbypatentsandpendingapplicationsintheUnitedStatesandglobally.Unlessspecifiedotherwise,alltrademarks are the exclusive property of Axxiom Manufacturing, Inc. © 2015. All rights reserved. 01/15


Contact your local Schmidt distributor or call Axxiom at 800-231-2085 for distributor information.


Blast & Recovery SystemsWhen you can't or don't want to use traditional open blast methods

The Schmidt® BRS is designed to maximize the use of a wide range of recyclable abrasives, including steel grit, to remove coatings and corrosion when cleaning steel or concrete surfaces. Blast and recover simultaneously, or blast and then vacuum abrasive independently. Eliminate dust clouds, poor visibility and costly, time-consuming cleanup. Ideal for sensitive jobsites, indoor blasting, building restoration, lead or asbestos abatement, bridge and road maintenance, barge and ship cleaning, and more.

BRS•Blast where open-air blasting is prohibited, or

is not possible or practical•Portable or skid-mounted 2.0, 3.5 and 6.5 cu. ft.

models•Pneumatic or optional electric remote controls•Blast pressure regulator with bypass piping

allows blasting at lower pressures•Urethane eductor (pneumatic vacuum pump)

with 150, 225, 350 or 440 CFM nozzle•Cyclonic dust separator/media reclaimer•Dust collector (dry or dry-HEPA) with automatic

pulse jet to prevent clogging•Easy, quick-open hatches for access to cartridgesandfilters

•Optionaldifferentialpressuregauge(dustcollector)

•Moisture separator and media vibrator for smooth,evenflowofabrasive

•TVII abrasive metering valve (urethane sleeve)•Tungsten Carbide TVII sleeves available•Optional adjustable air wash for improved

media cleaning•Optionalremoteabrasivecutoffforcleaner

start/stop•Optional electric vacuum available


A product of Axxiom Manufacturing, Inc.


About the BRS:The BRS is designed to blast and vacuum recover abrasive media for reuse. These systems can blast and vacuum abrasive independently, or blast and vacuum at the same time (closed circuit). Abrasive is contained in the pressure vessel for blasting. After or during blast operation, the abrasive is recovered using the system’s vacuum. Small particles are carried by the vacuum air stream through the reclaimer into the dust collector. The reusableabrasivedropstothebottomofthereclaimhopper.Largeparticles(paintchips,etc.)areseparatedout by an abrasive screen. Abrasive is reloaded from the reclaim hopper for reuse when the blast vessel is depressurized.

Specifications:Maximum working pressure (BRS): 150 psig at 250°FMinimum metal temperature (BRS): -20°F at 150 psigBlast hose size (BRS): Up to 1 1/2"

MODEL VESSELVOLUMECU.FT.(L)

MEDIARECLAIMERVOLUMECU.FT.(L)

CYCLONE AIR WASHBRS 2.0 2.0 (57) 2.4 (68) 2.0 (57)BRS 3.5 3.5 (100) 6.6 (187) 3.5 (100)BRS 6.5 6.5 (184) 8.3 (235) 6.5 (184)

Other Systems:The BRS2 is a 13.5 cu. ft., 20.0 cu. ft. or custom-sized system designed for higher productivity than the standard BRS systems, and has heavy duty, high capacity components for blasting, vacuuming and dust collection.

The miniBRS is a 0.3 cu. ft., highly portable and compact unit that can be operated in space or access-limited jobsites with just a 185 cfm compressor. It is designed to allow for blasting at lower pressures if desired, yet remains fully capable of maximum performance with the operator at up to 200 feet away from the vessel. (Dimensions34"Lx22"Wx60"H)

Axxiom Manufacturing, Inc. is the manufacturer of Schmidt products. Certain products manufactured by Axxiom areprotectedbypatentsandpendingapplicationsintheUnitedStatesandglobally.Unlessspecifiedotherwise,alltrademarks are the exclusive property of Axxiom Manufacturing, Inc. © 2014. All rights reserved. 12/14


Contact your local Schmidt distributor or call Axxiom at 800-231-2085 for distributor information.

MODEL HEIGHTIN(CM) WIDTHIN(CM) LENGTHIN(CM)

WEIGHTLBS(KG)SKIDMOUNT PORTABLE SKID

MOUNTPORTABLE SKIDMOUNT PORTABLE

CYCLONE AIR WASH

CYCLONE AIR WASH

CYCLONE AIR WASH

CYCLONE AIR WASH

BRS 2.0 71 (180) 83 (211) 76 (194) 87 (221) 27 (69) 35 (89) 60 (152) 983 (446) 895 (406) 997 (425) 988 (448)

BRS 3.5 81 (206) 87 (221) 88 (224) 94 (239) 36 (91) 53 (135) 68 (173) 1396 (633) 1483(673)

1540 (699) 1566(710)

BRS 6.5 100 (254) 115 (277) 107 (272) 122 (310) 36 (91) 53 (135) 68 (173) 1452 (659) 1610 (730)

1525 (692) 1760 (798)


The Schmidt BRS 2 is a high productivity system that is capable of using a wide range of abrasivemedia to remove coatings and corrosion. Featuring heavy duty construction and quality components,

this system is ideal for bridge and road maintenance, barge and ship cleaning, rail car facilities and many other steel and concrete cleaning applications.

Vessel shown with optional 50 Hpelectric vacuum blower

B l a s t a n d R e c o v e r y S y s t e m

• Features Schmidt TVII and ComboValve

• Optional High Flow Auto Air Valve for applications with large nozzles

• Moisture separator and media vibrator ensure consistent flow of abrasive

• Optional high efficiency secondary cyclone extends dust collector filter life

• Four-cartridge dust collector with automatic pulse jet to minimize clogging of dust filters

• Reclaimer features large, quick-opening door to access screen

B l a s t a n d R e c o v e r i n O N E S t e p

BRSII

( Blast & Recovery System II)


10/11

© 2011 Axxiom Manufacturing, Inc.Axxiom Manufacturing, Inc. is the manufacturer of Schmidt products. Certain products manufactured by Axxiom are protected by

patents and pending applications in the United States and globally. MV2, ComboValve, Thompson, HALOK, Schmidt, the Schmidt stylized “S” and the Axxiom design are registered trademarks. Trademarks pending or allowed include VPI, Microvalve, VBS, Ergo-

Ladder, miniBRS, G2E, G2P, CEN and the Axxiom logo. All rights reserved.

Pressure Vessel13.5 CF 30” dia. ASME Sect VIII coded pressurevessel rated for 150 psig90° cone bottom(2) 6” x 8” Handways

Blast Controls(2) 11⁄2 Thompson Valve II (polyurethane sleeve)with automatic air valveG2 Pneumatic deadman controls with 55’ twinlineComboValve blowdown

Hopper/Reclaimer 30” dia. 10.5 CF above pressure vesselTurnbuckle Hold Down for easy removal30” dia. Plate Flange cover10” dia. Spider/Pop-up Access door6” dia. Screen Access doorVibrating screen with 1/4” perforated screen Adjustable air washSecondary Cyclone20” dia. rectangular entry designHigh-efficiency design to reduce loading of dust collector60° cone bottom with 4" camlock drain

Dust Collector48" dia. vessel with 90° cone bottom8” dia. dust drain with butterfly valve(4) Four cartridge design (4 paper filters included)23” x 30” door for easy access to all cartridges(2) 8” dia. pulse piping access hatchesAutomatic 120VAC pulse controls with (4) Four Goyen pulse valves Magnehelic gage for filter sensing(1) Hi-attenuation blower silencer (approx. 85dB)

Options Available

Electric Controls (per outlet) (specify voltage) Remote Abrasive Cutoff Pneumatic (per outlet) Remote Abrasive Cutoff Electric (per outlet) +Shipyard Lifting Frame 20 CF 36" dia. vessel (dished bottom) 10 CF Double Chamber w/ Combo Probe *40 HP Electric Vacuum Blower *50 HP Electric Vacuum Blower *40 HP Diesel Driven Blower Dual Eductors

www.AxxiomMfg.com Phone: 800.231.2085 Fax: 888.600.3300


The Schmidt Industrial Blast and Recovery system is designed to meet the needs of industrial blasting operations. This flexible system offers an affordable alternative to traditional blast rooms.

A wide range of available vessel sizes allows for multiple operators and high productivity.

• Features Schmidt TVII and ComboValve

• Optional High Flow Auto Air Valve for large nozzle applications

• Moisture separator and media vibrator ensure even consistent flow of abrasive

• Optional high efficiency secondary cyclone extends dust collector filter life

• Cartridge style dust collector with automatic pulse jet to minimize clogging of filter

• Custom systems available

• Optional floor trough system available

B l a s t a n d R e c o v e r y S y s t e m

C o n v e r t Yo u r R o o m i n t o a B l a s t R o o m

IBRS

( Industrial Blast & Recovery System)


© 2011 Axxiom Manufacturing, Inc.Axxiom Manufacturing, Inc. is the manufacturer of Schmidt products. Certain products manufactured by Axxiom are protected by

patents and pending applications in the United States and globally. MV2, ComboValve, Thompson, HALOK, Schmidt, the Schmidt stylized “S” and the Axxiom design are registered trademarks. Trademarks pending or allowed include VPI, Microvalve, VBS, Ergo-

Ladder, miniBRS, G2E, G2P, CEN and the Axxiom logo. All rights reserved.10/11

Pressure Vessel 6.5 CF 24” dia. ASME Sect VIII coded pressure vessel rated for 150 psig Standard Schmidt 33⁄4” dia. pop-up with spider 90° cone bottom, 6" x 8" Handway (2) Two outlet capability

Blast Controls (1) 11⁄2” Thompson Valve II metering (polyurethane sleeve) (1) 11⁄4” Union end ball valve G2 Pneumatic deadman controls with 55’ twinline Manual Blowdown High Flow AAV for greater productivity 11⁄2” small pot moisture trap

Hopper 24" dia. 6.5 CF above pressure vessel Access door(s) at top and bottom for screen and pop-up Vibrating screen with 1/4” perforation High level sight glass

Reclaimer 24" dia. cyclonic design Adjustable air wash Wear resistant material or liner

Miscellaneous FeaturesSkid mounted with side fork pocketsStandard Schmidt blast, prime and paint white25’ of 6” vacuum hose included

Dust Collector Two cartridge design (2 paper filters included) Dual doors for easy access to cartridges Automatic 120VAC pulse controls with (2) Goyen pulse valves Magnahelic gage for filter sensing 1000 CFM @ 32” WC 10HP Electric Blower 460 or 230/3PH/60 Hz Hi-attenuation blower silencer (approx. 85dB)

Options AvailableAdditional Thompson Valve II pneumatic outletSecondary cyclone separator 800 CFM moisture separator Tungsten Carbide sleeveUnion end ball valveElectric controls (per outlet) (specify voltage)Remote abrasive cutoff PneumaticRemote abrasive cutoff ElectricComboValve blowdownOption for 10.5 CF (30” dia.) blast pot & hopper

www.AxxiomMfg.com Phone: 800.231.2085 Fax: 888.600.3300

Documents

u miniBRS · circuit). Abrasive is contained in the pressure vessel for blasting. After or during blast operation, the abrasive is recovered in the reclaim hopper using the system’s