Upload
others
View
11
Download
0
Embed Size (px)
Citation preview
Order code: ELUM108
TZ 250F LED Zoom Fresnel WW
User Manual
www.prolight.co.uk TZ 250F LED Zoom Fresnel WW User Manual 2
Safety advice
WARNINGFOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP!• Beforeyourinitialstart-up,pleasemakesurethatthereisnodamagecausedduringtransportation.
• Shouldtherebeanydamage,consultyourdealeranddonotusetheequipment.
• Tomaintaintheequipmentingoodworkingconditionandtoensuresafeoperation,itisnecessaryfortheusertofollowthesafetyinstructionsandwarningnoteswritteninthismanual.
• Pleasenotethatdamagescausedbyusermodificationstothisequipmentarenotsubjecttowarranty.
IMPORTANT:The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorised modification to the equipment.
OPERATING DETERMINATIONSIfthisequipmentisoperatedinanyotherway,thanthosedescribedinthismanual,theproductmaysufferdamageandthewarrantybecomesvoid.Incorrectoperationmayleadtodangere.g:short-circuit,burnsandelectricshocksetc.
Donotendangeryourownsafetyandthesafetyofothers!
Incorrectinstallationorusecancauseseriousdamagetopeopleand/orproperty.
CAUTION!KEEP THIS EQUIPMENT AWAY FROM RAIN, MOISTURE AND LIQUIDS
CAUTION! TAKE CARE USING THIS EQUIPMENT!HIGH VOLTAGE-RISK OF ELECTRIC SHOCK!!
• Neverletthepowercablecomeintocontactwithothercables.Handlethepowercableandallmainsvoltageconnectionswithparticularcaution!
• Neverremovewarningorinformativelabelsfromtheunit.
• Donotopentheequipmentanddonotmodifytheunit.
• Donotconnectthisequipmenttoadimmerpack.
• Donotswitchtheequipmentonandoffinshortintervals,asthiswillreducethesystem’slife.
• Onlyusetheequipmentindoors.
• Donotexposetoflammablesources,liquidsorgases.
• Alwaysdisconnectthepowerfromthemainswhenequipmentisnotinuseorbeforecleaning!Onlyhandlethepower-cablebytheplug.Neverpullouttheplugbypullingthepower-cable.
• Makesurethattheavailablemainssupplyvoltageisbetween110~240VAC,50/60Hz.
• Makesurethatthepowercableisnevercrimpedordamaged.Checktheequipmentandthepowercableperiodically.
• Iftheequipmentisdroppedordamaged,disconnectthemainspowersupplyimmediatelyandhaveaqualifiedengineerinspecttheequipmentbeforeoperatingagain.
• Iftheequipmenthasbeenexposedtodrastictemperaturefluctuation(e.g.aftertransportation),donotconnectpowerorswitchitonimmediately.Thearisingcondensationmightdamagetheequipment.Leavetheequipmentswitchedoffuntilithasreachedroomtemperature.
• Ifyourproductfailstofunctioncorrectly,stopuseimmediately.Packtheunitsecurely(preferablyintheoriginalpackingmaterial),andreturnittoyourProLightdealerforservice.
• Onlyusefusesofsametypeandrating.
• Repairs,servicingandpowerconnectionmustonlybecarriedoutbyaqualifiedtechnician.THISUNITCONTAINSNOUSERSERVICEABLEPARTS.
• Thislightingfixtureisforprofessionaluseonly-itisnotdesignedfororsuitableforhouseholduse.Theproductmustbeinstalledbyaqualifiedtechnicianinaccordancewithlocalterritoryregulations.Thesafetyoftheinstallationistheresponsibilityoftheinstaller.Thefixturepresentsrisksofsevereinjuryordeathduetofirehazards,electricshockandfalls.
• Warning!RiskGroup2LEDproductaccordingtoEN62471.Donotviewthelightoutputwithopticalinstrumentsoranydevicethatmayconcentratethebeam.
• WARRANTY:Twoyearsfromdateofpurchase.
www.prolight.co.uk TZ 250F LED Zoom Fresnel WW User Manual 3
Product overview & technical specifications
TheTZ250FLEDZoomFresnelisahighperformanceluminaireforgenerallongthrowlightingapplications.Thisfixtureoffersasuperiorlightoutputatamoderatepricepoint.The250WLEDoffersabetteroutputthana1200Whalogenfixture.The4pushbuttondisplayallowsuserstoselectDMXandmanualdimmingmodesalongwithdimmingcurves.
•1x250WwarmwhiteCOBLED(3200K)
•Adjustablebeamangle:13°-45°
•35,000Lux@2m(fullon)
•3.6kHzrefreshrate
•DMXchannels:2
•0-100%dimming
•4dimmingcurvesinbothLEDandhalogenprofiles:Linear,squarelaw,inversesquarelawandS-curve
•4pushbuttonmenuwithLCDdisplay
•PowerCONinput/output
•5-PinXLRinput/output
•3-PinXLRinput/output
•Filterframeandbarndoorsincluded
TZ 250F LED Zoom Fresnel WW
Specifications TZ 250F LED Zoom Fresnel
Powerconsumption 260W
Powersupply 110~240V,50/60Hz
Dimensions 399x336x420mm
Weight 8.1kg
Ordercode ELUM108
336mm
280mm
310mm
399mm
420mm
458mm
0m 2m 3m 4m 5m
13° - Lux45° - Lux
350007700
1m
14000030800
156003420
45°
87501930
56001230
13°
www.prolight.co.uk TZ 250F LED Zoom Fresnel WW User Manual 4
POWER INPUT:110-240V~50/60HzDMX INPUT DMX OUTPUTFUSE: T3A 250V POWER OUT
DMX occupation: 1: Ground 2: Signal (-) 3: Signal (+)
DMX occupation: 1: Ground 2: Signal (-) 3: Signal (+) 4: NC 5: NC
09 10
11 03 0302 12
13
14
05 06
07
01
08
04
Technical specifications
01-Earthpoint
02-LCDdisplay
03-Functionbuttons
04-Functionknobs
05-3-PinDMXinput
06-3-PinDMXoutput
07-5-PinDMXinput
08-5-PinDMXoutput
09-PowerCONinput
10-PowerCONoutput
11-FuseT3A250V
12-Barndoors
13-Hangingbracket
14-Hangingbracketadjustableknob
Inthebox:1 x fixture, 1 x barn doors 1 x PowerCON cable & 1 x user manual
www.prolight.co.uk TZ 250F LED Zoom Fresnel WW User Manual 5
Operating instructions
MENU
DMX MODE DMX address setting
DMX MODE ADDR:001
DMX MODE ADDR:512
NoDMX Mode
NoDMX Mode Hold
NoDMX Mode Close
Blackout if no DMX signal present
Hold last command
Dormancy
Dormancy 00
Dormancy 99
Last command hold (0 mins - 9 mins)
Backlight
Backlight 02
Backlight 60
Backlight (02 mins - 60 mins)
Lamp Behaviour
Lamp Behaviour LED
Lamp Behaviour Halogen
LED/Halogen selection
Fan.Set
Fan.Set Auto
Fan.Set Low
Fan speedFan.Set High
Dim.Curve
Dim.Curve Linear
Dim.Curve INV.Square
Dim.Curve Square
Dimmer Curves
Dim.Curve S-Curve
www.prolight.co.uk TZ 250F LED Zoom Fresnel WW User Manual 6
Operating instructions
Fixture Time
Temp.Info
Error.Info
Model.Info Elumen8
Reset.Motor Focus
Software.V
Panel.Ctrl Dim:000
Panel.Ctrl Dim:255
Panel.Ctrl
Panel.Ctrl Focus:000
Panel.Ctrl Focus:255
Brightness/ beam angle
Calibrate
Calibrate Focus:000
Calibrate Focus:255
Calibrate focus
MENU CONT.
www.prolight.co.uk TZ 250F LED Zoom Fresnel WW User Manual 7
DMX mode:
OperatinginaDMXcontrolmodeenvironmentgivestheuserthegreatestflexibilitywhenitcomestocustomisingorcreatingashow.Inthismodeyouwillbeabletocontroleachindividualtraitofthefixtureandeachfixtureindependently.
ToaccesstheDMXaddressmode,pressthe“MENU”buttononthefrontoftheunittoshow“DMX MODE ADDR:” ontheLCDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstosettherequiredDMXaddress.Pressthe“ENTER”buttontoconfirmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
TochoosewhatthefixturedoeswhenitlosesDMXsignal,pressthe“MENU”buttononthefrontoftheunittoshow“NoDMX Mode” ontheLCDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoosebetween“Hold”or“Close”.Pressthe“ENTER”buttontoconfirmthesetting.
Ifyouchoose“HOLD”pressthe“MENU”againtoshow“Dormancy” ontheLCDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstosethowlongthefixtureholdsthelastDMXsignalfor,from“00” - “99”.Pressthe“ENTER”buttontoconfirmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Manual dimming/focus mode:Toaccessthemanualdimming/focusmode,pressthe“MENU”buttonontherearoftheunittoshow“Panel.Ctrl”ontheLCDdisplay.Theunitisnowinmanualdimming/focusmode.Pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstosetthefocusfrom“000” - “255”.Pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstosetthebrightnessfrom“000” - “255”.
Alternativelyyoucanaccessthismodebypressingeitherofthe“DIMMING” or“FOCUS” knobs.Pressthe“DIMMING”knobandturntosetthefocusfrom“000” - “255”.Pressthe“ENTER”buttontoconfirmthesetting.Repeatforthe“FOCUS”knob.
(000 = LED off, 255 = LED at full brightness).
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Operating instructions
Channel Value Function
1 000-255 Focus(8bit)
2 000-255 Masterdimmer(0-100%)
2 channel mode:
www.prolight.co.uk TZ 250F LED Zoom Fresnel WW User Manual 8
Focus calibration:Toaccessfocuscalibration,pressthe“MENU”buttonontherearoftheunittoshow“Calibrate”ontheLCDdisplay.Pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstosetthefocusfrom“000” - “255”.Pressthe“ENTER”buttontoconfirmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Dimming curves
Toaccesstheunitsdimmercurves,pressthe“MENU”buttonontherearoftheunittoshow“Dim.Curve”ontheLCDdisplay.Pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstosetthedimmingcurverequired.
“Linear”-LELineardimmingcurve
“Square”-LEDSquaredimmingcurve
“INV.Square”-LEDInverseSquaredimmingcurve
“S-Curve”-LEDS-Curvedimmingcurve
Pressthe“ENTER”buttontoconfirmthesetting.
TochoosebetweenHalogenandLEDdimmercurves,pressthe“MENU”buttonontherearoftheunittoshow“Lamp Behaviour”ontheLCDdisplay.Pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstosetthedimmingcurvemoderequired.
“LED”-LEDdimmingcurves
“Halogen”-Halogendimmingcurves
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Operating instructions
www.prolight.co.uk TZ 250F LED Zoom Fresnel WW User Manual 9
Setting the DMX address:
TheDMXmodeenablestheuseofauniversalDMXcontroller.Eachfixturerequiresa“startaddress”from1-511.Afixturerequiringoneormorechannelsforcontrolbeginstoreadthedataonthechannelindicatedbythestartaddress.Forexample,afixturethatoccupiesoruses7channelsofDMXandwasaddressedtostartonDMXchannel100,wouldreaddatafromchannels:100,101,102,103,104,105and106.Chooseastartaddresssothatthechannelsuseddonotoverlap.E.g.thenextunitinthechainstartsat107.
DMX 512:
DMX(DigitalMultiplex)isauniversalprotocolusedasaformofcommunicationbetweenintelligentfixturesandcontrollers.ADMXcontrollersendsDMXdatainstructionsformthecontrollertothefixture.DMXdataissentasserialdatathattravelsfromfixturetofixtureviatheDATA“IN”andDATA“OUT”XLRterminalslocatedonallDMXfixtures(mostcontrollersonlyhaveadata“out”terminal).
DMX linking:
DMXisalanguageallowingallmakesandmodelsofdifferentmanufacturestobelinkedtogetherandoperatefromasinglecontroller,aslongasallfixturesandthecontrollerareDMXcompliant.ToensureproperDMXdatatransmission,whenusingseveralDMXfixturestrytousetheshortestcablepathpossible.TheorderinwhichfixturesareconnectedinaDMXlinedoesnotinfluencetheDMXaddressing.Forexample;afixtureassignedtoaDMXaddressof1maybeplacedanywhereinaDMXline,atthebeginning,attheend,oranywhereinthemiddle.WhenafixtureisassignedaDMXaddressof1,theDMXcontrollerknowstosendDATAassignedtoaddress1tothatunit,nomatterwhereitislocatedintheDMXchain.
DATA cable (DMX cable) requirements (for DMX operation):
ThisfixturecanbecontrolledviaDMX-512protocol.TheDMXaddressissetonthebackoftheunit.YourunitandyourDMXcontrollerrequireastandard3-pinXLRconnectorfordatainput/output,seeimagebelow.
Note: DMX cable must be daisy chained and cannot be split.
DMX setup
FurtherDMXcablescanbepurchasedfromallgoodsoundandlightingsuppliersorProLightConceptsdealers.Pleasequote:
CABL10 – 2mCABL11 – 5mCABL12 – 10m
www.prolight.co.uk TZ 250F LED Zoom Fresnel WW User Manual 10
Notice:
Besuretofollowthediagramsbelowwhenmakingyourowncables.DonotconnectthecablesshieldconductortothegroundlugorallowtheshieldconductortocomeincontactwiththeXLRsoutercasing.Groundingtheshieldcouldcauseashortcircuitanderraticbehaviour.
Special note:
Line termination:
Whenlongerrunsofcableareused,youmayneedtouseaterminatoronthelastunittoavoiderraticbehaviour.
Using a cable terminator will decrease the possibilities of erratic behaviour. (3-pin - Order ref: CABL90, 5-pin - Order ref: CABL89)
5-pin XLR DMX connectors:
Somemanufacturesuse5-pinXLRconnectorsfordatatransmissioninplaceof3-pin.5-pinXLRfixturesmaybeimplementedina3-pinXLRDMXline.Wheninsertingstandard5-pinXLRconnectorsintoa3-pinlineacableadaptormustbeused.Thediagrambelowdetailsthecorrectcableconversion.
Terminationreducessignaltransmissionproblemsandinterference.ItisalwaysadvisabletoconnectaDMXterminal,(resistance120Ohm1/4W)betweenpin2(DMX-)andpin3(DMX+)ofthelastfixture.
5-pin XLR (female)Pin 1: GND (screen)Pin 2: Signal (-)Pin 3: Signal (+)Pin 4: N/CPin 5: N/C
3-pin XLR (female)Pin 1: GND (screen)Pin 2: Signal (-)Pin 3: Signal (+)
3-pin XLR (male)Pin 1: GND (screen)Pin 2: Signal (-)Pin 3: Signal (+)
5-pin XLR (male)Pin 1: GND (screen)Pin 2: Signal (-)Pin 3: Signal (+)Pin 4: N/CPin 5: N/C
DMX setup
www.prolight.co.uk TZ 250F LED Zoom Fresnel WW User Manual 11
WEEE notice
Correct Disposal of this Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
Thismarkingshownontheproductoritsliterature,indicatesthatitshouldnotbedisposedwithotherhouseholdwastesattheendofitsworkinglife.Topreventpossibleharmtotheenvironmentorhumanhealthfromuncontrolledwastedisposal,pleaseseparatethisfromothertypesofwastesandrecycleitresponsiblytopromotethesustainablereuseofmaterialresources.
Householdusersshouldcontacteithertheretailerwheretheypurchasedthisproduct,ortheirlocalgovernmentoffice,fordetailsofwhereandhowtheycantakethisitemforenvironmentallysaferecycling.
Businessusersshouldcontacttheirsupplierandcheckthetermsandconditionsofthepurchasecontract.Thisproductshouldnotbemixedwithothercommercialwastesfordisposal.
www.prolight.co.uk TZ 250F LED Zoom Fresnel WW User Manual 12