ENGINEERING METAL PRODUCTS TYRE KILLERS (ROAD SPIKES)

applications. They are a simple to install ideally suited for approach entrances to banks, military installations, airports,

Tyre Killers are designed especially for entrance points which have a threat of vehicle attack or for the ones that have high security requirements.

IF there is a threat of vehicle attack in addition to the control of vehicle access in high security applications. Tyre Killer are one of the most secure systems. Even though the attack is from high tonnage vehicles with high speeds.

It’s not possible for the vehicle to keep on moving because of the damage given to wheels and the rim of the vehicle.

It is simple and reliable, vehicle operated mechanical system.

ABOUT THE PRODUCT

The teeth have a spring return system, plus a separate sprung control system allowing the angle of the teeth to move to ensure that the optimal angle of attack is available for the type of vehicles being controlled.

Tyre killer barriers are be produced to protect any width of road, as single barriers or opposing pairs as required.

Ver. 1.0 June 2017

Copyright © 2017 by Al Kuhaimi Metal Industries Ltd (KMI), All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, without the prior written permission of KMI, except in the case of noncommercial uses permitted by copyright law.

Al Kuhaimi Metal Industries Ltd.11th Street, First industrial cityP.O. Box 545, Dammam 31421, Saudi ArabiaTel.: +966 13 847 2777Fax: +966 13 847 2591info@alkuhaimi.com

Al Kuhaimi Engineering Metal Industries (KEMI)58 th Street, Second industrial cityP.O. Box 545, Dammam 31421, Saudi ArabiaTel.: +966 13 812 2244 / 7449 / 1074Fax: +966 13 812 3984spd-division@alkuhaimi.com

www.alkuhaimi.com