Type 4 Panel Enclosures - eaton.com€¦ · Type 4 Panel Enclosures Type 4 Panel Enclosures EATON CORPORATION May 2013 5 Cover Clamp Layout CH443-4CHC CH643-4CHC CH863.5-4CHC CH644-4CHC

Type

4 Pa

nel E

nclo

sure

sType 4 Panel Enclosures

2 EATON CORPORATION May 2013

Construction• Enclosure and cover are fabricated from (16) gauge steel

• All continuous welded seams are finished smooth

• Cover is secured to the body with easy-to-operate stainless steel screw clamps mounted on all four sides

• Cover has a seamless poured in place gasket

• Ground stud provided on cover

• #10-32 weld nuts are provided for mounting optional panel on 6” x 4” and larger enclosures

• External mounting feet are provided for secure wall mounting

Application• Houses electrical controls and instruments

• Intended for indoor or outdoor use

• Protects against windblown dust and rain, splashing water and hose directed water

Standards• UL 508 Listed, Type 4, Type 12 and Type 13

• CSA C22.2 No. 94 Certified, Type 4, Type 12 and Type 13

• Conforms to NEMA Standard for Type 4, Type 12 and Type 13

• Conforms to JIC Standard EGP-1-1967

Finish• Wash and phosphate undercoat

• ANSI 61 gray polyester powder finish

Accessories• Panels

• JIC terminal strap kit

• JIC terminal strip kit

• Terminal blocks

• Touch-up paint

• See Accessories section

Seamless poured in place gasket

JIC EnclosuresType 4 Lift-Off Cover Data Sheet

Type 4 Panel EnclosuresType 4 Panel Enclosures

EATON CORPORATION May 2013 3

CH443-4LCCH643-4LCCH863.5-4LCCH664-4LC

CH1084-4LC

CH12105-4LCCH14126-4LC

CH16146-4LC

clampmounting feet

weld nut(4PL)

B

D

D

AA+.75 (19)

A-1.75 (44)

B-2.00 (51)

C-.46 (12)

A-1.00 (25)

B-1.00 (25)

B-1.75 (44)

F F

E

C

Cover Clamp

Layout

Front View

Side View

optional panel

.31 (8) mounting hole (4PL)

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

JIC EnclosuresType 4 Lift-Off Cover Illustration Sheet and Catalog Number

Enclosure

Enclosure Size

Height x Width x Depth

AxBxC

D E FPanel Catalog

Number

Panel Size

Height x Width

Catalog # in. mm. in. mm. in. mm. in. mm. Painted Conductive in. mm.

CH443-4LC 4.00 x 4.00 x 3.00 102 x 102 x 76 2.00 51 - - 2.00 51 - - - -

CH643-4LC 6.00 x 4.00 x 3.00 152 x 102 x 76 3.00 76 - - 2.00 51 CHAW64P CHAW64GP 4.87 x 2.87 124 x 73

CH863.5-4LC 8.00 x 6.00 x 3.50 203 x 152 x 89 4.00 102 - - 3.00 76 CHAW86P CHAW86GP 6.87 x 4.87 174 x 124





CH16146-4LC 16.00 x 14.00 x 6.00 406 x 356 x 152 2.00 51 8.00 203 3.00 76 CHAW1614P CHAW1614GP 14.87 x 12.87 378 x 327

Type

4 Pa

nel E

nclo

sure





• Cover is secured to the body with a continuous hinge on one side and easy-to-operate stainless steel screw clamps mounted to the opposite side

• Stainless steel hinge pin

















• Terminal blocks

• Touch-up paint


Seamless poured in place gasket

JIC EnclosuresType 4 Continuous Hinge CoverData Sheet



Cover Clamp

Layout

CH443-4CHCCH643-4CHCCH863.5-4CHCCH644-4CHCCH664-4CHC

CH1084-4CHCCH1086-4CHC

CH12105-4CHCCH12126-4CHCCH14126-4CHC

CH16146-4CHC

clampmounting feet

optional panel

weld nut(4PL)

continuous hinge

B

F F

D

D

E

AA+.75 (19)

A-1.75 (44)

B-1.00 (25)

A-1.00 (25)

B-2.00 (51)

B-1.75 (44)

C

C-.46 (12)



Front View

Side View

Enclosure

Enclosure Size


AxBxC

D E FPanel Catalog

Number

Panel Size

Height x Width

Catalog # in. mm. in. mm. in. mm. in. mm. Steel Conductive in. mm.

CH443-4CHC 4.00 x 4.00 x 3.00 102 x 102 x 76 2.00 51 - - 2.00 51 - - - -

CH643-4CHC 6.00 x 4.00 x 3.00 152 x 102 x 76 3.00 76 - - 2.00 51 CHAW64P CHAW6G4P 4.87 x 2.87 124 x 73

CH863.5-4CHC 8.00 x 6.00 x 3.50 203 x 152 x 89 4.00 102 - - 3.00 76 CHAW86P CHAW86GP 6.87 x 4.87 174 x 124

CH644-4CHC 6.00 x 4.00 x 4.00 152 x 102 x 102 3.00 76 - - 2.00 51 CHAW64P CHAW64GP 4.87 x 2.87 124 x 73







CH16146-4CHC 16.00 x 14.00 x 6.00 406 x 356 x 152 2.00 51 8.00 203 3.00 76 CHAW1614P CHAW1614GP 14.87 x 12.87 378 x 327

JIC EnclosuresType 4 Continuous Hinge CoverIllustration Sheet and Catalog Number

Type

4 Pa

nel E

nclo

sure






• Swing-out panel kits

• JIC terminal kits

• Window kits

• Locks and latches



• Continuous hinge with stainless steel hinge pin

• Slotted quarter-turn flush latch(es)




• External mounting feet




Standards• UL 508 Listed, Type 4, Type 12

• CSA C22.2 No. 94 Certified, Type 4, Type 12

• Conforms to NEMA Standards for Type 3, Type 4, Type 12

• Conforms to JIC Standards EGP-1-1967

C

optional panel

C-.46 (12)

mounting feet

continuous hinge

B

B-1.00 (25)

A-1.00 (25)

B-2.00 (51)

B-1.75 (44)

D

D

E

AA+.75 (19)

A-1.75 (44)


weld nut(4PL)

quarter-turn

latches

omit center latch when A is 12 or greater

omit top & bottom latches when A is 10

or less

Front View

Side View

JIC EnclosuresType 4 Continuous Hinge Cover with Quarter-Turn Latches Data and Illustration Sheet




Quarter-Turn Latch

Layout

CH443-4QT CH884-4QTCH643-4QT CH866-4QTCH863.5-4QT CH886-4QTCH864-4QT CH1084-4QTCH444-4QT CH1086-4QTCH644-4QT CH10106-4QTCH664-4QT

CH1264-4QT CH16106-4QTCH12105-4QT CH16146-4QTCH12106-4QT CH12108-4QTCH12126-4QT CH14128-4QTCH1486-4QT CH16148-4QTCH14126-4QT CH161410-4QT

JIC EnclosuresType 4 Continuous Hinge Cover with Quarter-Turn Latches Illustration Sheet and Catalog Number

Enclosure

Enclosure Size


AxBxC

D E Panel ConductivePanel Size

Height x Width

Catalog # in. mm. in. mm. in. mm. Catalog # Catalog # in. mm.

CH443-4QT 4.00 x 4.00 x 3.00 101 x 101 x 76 - - 2 51 - - - -

CH643-4QT 6.00 x 4.00 x 3.00 152 x 101 x 76 - - 3 76 CHAW64P CHAW64GP 4.87 x 2.87 123 x 73

CH863.5-4QT 8.00 x 6.00 x 3.50 203 x 152 x 89 - - 4 101 CHAW86P CHAW86GP 6.87 x 4.87 174 x 123


CH444-4QT 4.00 x 4.00 x 4.00 101 x 101 x 101 - - 2 51 - - - -





CH1264-4QT 12.00 x 6.00 x 4.00 305 x 152 x 101 3 76 - - CHAW126P - 10.87 x 4.87 276 x 123

CH12105-4QT 12.00 x 10.00 x 5.00 305 x 254 x 127 3 76 - - CHAW1210P CHAW1210GP 10.87 x 8.87 276 x 225














CH161410-4QT 16.00 x 14.00 x 10.00 406 x 355 x 254 3 76 - - CHAW1614P AW1614GP 14.87 x 12.87 377 x 327

Type

4 Pa

nel E

nclo

sure



Construction• Enclosure and door are fabricated from code gauge steel


• Doors are secured to the body with a heavy duty continuous hinge on one side and easy-to-release stainless steel door clamps mounted to the other three sides

• Ground stud provided on door

• Formed lip around enclosure opening diverts liquids and contaminants

• Each door has a padlock hasp with sealing hole provision

• Print pocket provided

• Door has a seamless poured in place gasket

• .375-16 collar studs are provided for mounting optional panel











• NEMA terminal strap kit

• Terminal blocks

• Door lock kit

• Floor stand kit

• Touch-up paint


Wall-Mount EnclosuresType 4 Single-DoorData Sheet



Notes: Dimensions: **B = (-2.50) if 12 inches wide; (-6.00) if wider than 12 inches. Clamps are mounted along three sides of the enclosure door. Spacing between clamps along side opposite the hinge does not exceed 15 inches. Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

padlock hasp

door clamp(see note on this page)

mounting feet

print pocket(supplied)

.375-16 collar stud (omit center studs where “A” is less than 36)

.375-16 collar stud(omit center studs where “B” is less than 36)

X

Section X-X

X

B C

B (**B)

3.50(89)

3.50(89)

A+1.25 (32)

A-2.75 (70)

C

B-2.75 (70)

A CL

CL

CL

CL

B-4.75 (121)

A-4.75 (121)

optional backpanel


See page 58 for dimensions

Front ViewSide View

Wall-Mount EnclosuresType 4 Single-DoorIllustration Sheet

Type

4 Pa

nel E

nclo

sure




See page 9 for drawings.

Enclosure

Enclosure Size


AxBxCGauge

PanelPanel Size

Height x Width

Catalog # in. mm. Painted Conductive in. mm.

CH16126-4 16.00 x 12.00 x 6.00 406 x 305 x 152 16 CHAW1612P CHAW1612GP 13.00 x 9.00 330 x 229





CH24126-4 24.00 x 12.00 x 6.00 610 x 305 x 152 16 CHAW2412P -- 21.00 x 9.00 533 x 229




































Wall-Mount EnclosuresType 4 Single-DoorCatalog Number



Accessories• Premier panels • Security latch inserts

• NEMA panel adapters • Mounting foot kits

• Depth adjustment brackets • EIA/TIA rack mounting angles

• Print pockets • Swing-out panels

• Padlockable or keyed handles • See Accessories section

Construction• Enclosure and door are fabricated from code gauge steel • All continuous welded seams are finished smooth• Hardware kit provided contains grounding hardware, .312-18

flanged hex nuts for panel mounting, and sealing washers for body mounting holes

Body Construction• Body flange trough design is formed around body opening to

divert liquid contaminants away from door opening • Reduced width flange design increases enclosure opening• Ground stud provided in enclosure body• .312-18 collar studs are provided for mounting optional Premier

series panels• Enclosure mounting holes in body provided for direct mounting or

optional mounting feet• Utility bracket provides wire management and accessory mounting

options

Door Construction• Doors are secured to the body with a unique spring-loaded hidden

hinge design on one side and slotted quarter-turn flush latch(es) on the opposite side

• Doors are easily removed and interchangeable


• Door opens 170° for easy access

• Utility rail provides grounding, rigidity and wire management

• Window-door enclosures feature flush-mounted clear polycarbonate window



• Protects against circulating and windblown dust, falling dirt, dripping non-corrosive liquids, rain, splashing water and hose directed water

Standards• UL 508 Listed, Type 4 and Type 12

• cUL Listed, Type 4 and Type 12

• Conforms to NEMA Standard for Type 4 and Type 12



Wall-Mount EnclosuresType 4 Premier™ Series with Quarter-Turn LatchesData Sheet and Catalog Number

Enclosure

Catalog #

Enclosure SizeHeight x Width x Depth

AxBxC

Door/

BodyPanel

Panel Size

Height x Width

Mounting

DxE

Window Size

FxGLatch

J

Solid Door Window Door in. mm. Gauge Catalog # in. mm. in. mm. in. mm. Qty. in. mm.

CH1084-SD - 10 x 8 x 4 254 x 203 x 102 16/16 CH108P 8.00 x 6.00 203 x 152 8.50 x 6.37 216 x 162 - - 1 5.00 127



CH12126-SD CH12126-SDW 12 x 12 x 6 305 x 305 x 152 16/16 CH1212P 10.00 x 10.00 254 x 254 10.50 x 10.37 267 x 264 8.25 x 7.00 210 x 178 1 6.00 152








CH24246-SD CH24246-SDW 24 x 24 x 6 610 x 610 x 152 14/16 CH2424P 22.00 x 22.00 559 x5 59 22.50 x 22.37 572 x 568 20.25 x 17.62 514 x 448 2 5.00 127

Type

4 Pa

nel E

nclo

sure




Enclosure

Catalog #


AxBxC

Door/

BodyPanel

Panel Size

Height x Width

Mounting

DxE

Window Size

FxGLatch

J

Solid Door Window Door in. mm. Gauge Catalog # in. mm. in. mm. in. mm. Qty in. mm.






























CH362410-SD - 36 x 24 x 10 914 x 610 x 254 14/14 CH3624P 34.00 x 22.00 864 x 559 34.50x 22.37 876 x 568 - - 2 5.00 127

























Wall-Mount EnclosuresType 4 Premier™ Series with Quarter-Turn LatchesCatalog Number




H

W

E

D

G

A

B

J

A-1.75(44)

B-1.75 (44)

FA-2J

(when latch qty.=2)

.812(21).750

(19)

Section X-X

Mounting Holes.500 (13)

With Window

Front View

B

C

1.16(29)

A

J

A

A-2J(when latch

qty.=2)

A-2J/2(when latch

qty.=3)

Door clear (B≥36”)

B-3.30 (84)

B-1.75 (44)

.700(18)

A-1.75 (44)

Door clear w/out(B<36”)

B-2.48 (63)

X

X

Front View

Without Window

Side View

Wall-Mount EnclosuresType 4 Premier™ Series with Quarter-Turn LatchesIllustration Sheet

Type

4 Pa

nel E

nclo

sure





• Hardware kit provided contains grounding hardware, .312-18 flanged hex nuts for panel mounting, and sealing washers for body mounting holes


divert liquid contaminants away from door opening

• Reduced width flange design increases enclosure opening

• Ground stud provided in enclosure body

• .312-18 collar studs are provided for mounting optional Premier Series panels

• Enclosure mounting holes in body provided for direct mounting or optional mounting feet

• Utility bracket provides wire management and accessory mounting options

Door Construction• Doors are secured to the body with a unique spring-loaded

hidden hinge design on one side and slotted quarter-turn flush latch(es) on the opposite side

• Flush cover for recessed wall-mounting








• Protects against circulating and windblown dust, falling dirt, dripping non-corrosive liquids, rain, splashing water and hose directed water


• cUL Listed, Type 4 and Type 12




Accessories• Premier panels

• Security latch inserts

• NEMA panel adapters

• Mounting foot kits

• Depth adjustment brackets

• EIA/TIA rack mounting angles

• Print pockets

• Swing-out panels

• Padlockable or keyed handles


Wall-Mount EnclosuresType 4 Premier™ Series Flush-Mount with Quarter-Turn LatchesData Sheet




B+3.33 (85)

B+.64 (16)

B

H

W

B-1.62 (41)

A-1.50 (38)

.812(21).750

(19)

Section X-X

.500 (13)

J

E-1.75 (44)

D-1.75 (44)

E

D

A-2J(when latch

qty.=2)


(omit center holes where “A” is less than 30”)

Front View

Solid Door

C

.88(22)

A

A+3.33 (85)

A+.64 (16)

X

X

1.16(29)

Side View

Wall-Mount EnclosuresType 4 Premier™ Series Flush-Mount with Quarter-Turn LatchesIllustration Sheet and Catalog Number

Enclosure

Catalog #


AxBxC

Door/

BodyPanel

Panel Size

Height x Width

Mounting

DxELatch J

Solid Door in. mm. Gauge Catalog # in. mm. in. mm. Qty in. mm.

CH12126-FM 12.00 x 12.00 x 6.00 305 x 305 x 152 16/16 CH1212P 10.00 x 10.00 254 x 254 11.62 x 11.62 295 x 295 1 6.00 152







Type

4 Pa

nel E

nclo

sure




PanelsPremier panels can be installed in any Premier Series enclosure and are up to 20% larger than standard NEMA panels. Panels above 24” are flanged. Steel panels have a white polyester powder paint finish. Stainless steel sizes are available as shown in chart.

W

H

NEMA Panel AdaptersNEMA panel adapters allow standard NEMA panels to be used in Premier Series enclosures. Decreased height and width of NEMA panels increase space around panel for wire management. Kit includes four adapters and four .375-16 flanged hex nuts. Finish: Zinc Plated

Mounting Foot KitsMounting foot kits are available in stainless steel. Four feet and hardware are included.

Premier™ Series Accessories

Enclosure

Catalog #

Panel Size

Height x Width Gauge

Steel Stainless in. mm.

CH108P CH108PSS4 8.00 x 6.00 203 x 152 14

CH1210P CH1210PSS4 10.00 x 8.00 254 x 203 14

CH1212P CH1212PSS4 10.00 x 10.00 254 x 254 14

CH1612P CH1612PSS4 14.00 x 10.00 356 x 254 14

CH1616P CH1616PSS4 14.00 x 14.00 356 x 356 12

CH2016P CH2016PSS4 18.00 x 14.00 457 x 356 12

CH2020P CH2020PSS4 18.00 x 18.00 457 x 457 12

CH2416P CH2416PSS4 22.00 x 14.00 559 x 356 12

CH2420P CH2420PSS4 22.00 x 18.00 559 x 457 12

CH2424P CH2424PSS4 22.00 x 22.00 559 x 559 12

CH2442P CH2442PSS4 22.00 x 40.00 559 x 1016 12

CH3020P CH3020PSS4 28.00 x 18.00 711 x 457 12

CH3024P CH3024PSS4 28.00 x 22.00 711 x 559 12

CH3030P CH3030PSS4 28.00 x 28.00 711 x 711 12

CH3048P CH3048PSS4 28.00 x 46.00 711 x 1168 12

CH3060P CH3060PSS4 28.00 x 58.00 711 x 1473 12

CH3624P CH3624PSS4 34.00 x 22.00 864 x 559 12

CH3630P CH3630PSS4 34.00 x 28.00 864 x 711 12

CH3636P CH3636PSS4 34.00 x 34.00 864 x 864 12

CH4230P CH4230PSS4 40.00 x 28.00 1016 x 711 12

CH4236P CH4236PSS4 40.00 x 34.00 1016 x 864 12

CH4824P CH4824PSS4 46.00 x 22.00 1168 x 559 12

CH4836P CH4836PSS4 46.00 x 34.00 1168 x 864 12

CH6036P CH6036PSS4 58.00 x 34.00 1473 x 864 12

Catalog # Qty. For use with Premier Enclosures

CHPCK4 4 30” x 30” or smaller


CHWMKSS6 4 Type 316 Stainless Steel

Note: Cannot be used with enclosures 12” x 12” (305 mm x 305 mm) or smaller.




Dead Front PanelsDead front kits offer a means for mounting user components and equipment near the front of an enclosure opening. Also, creates a barrier and controls access to the enclosure interior. Kit includes ANSI 61 gray panel and all hardware for mounting to enclosures.

Mounting ChannelsMounting channels create a vertical or horizontal framework for DIN rail, flexible mounting straps or other component attachment. Two channels provided for mounting on enclosure collar studs. Finish: Zinc Plated

Swing-Out PanelsSwing-out panels offer a means for mounting user components and equipment near the front of an enclosure opening. Panel pivots from front of enclosure to allow easy access to internal equipment. Swing-out panels are 14 gauge with a white polyester powder finish and includes all hardware for mounting to front flange of enclosure.

Note: Swing-out panel distance from panel face to inside of enclosure cover equals 1¼”.

Note: Dead front panel distance from panel face to inside of enclosure cover equals 1¼”.


Catalog #

Panel Size

Height x Width

For use with Premier

Enclosures

in. mm. A x B

CH1212SP 9.78 x 9.84 248 x 250 12.00 x 12.00

CH1612SP 13.78 x 9.84 350 x 250 16.00 x 12.00

CH1616SP 13.78 x 13.84 350 x 352 16.00 x 16.00

CH1620SP 13.78 x 17.84 350 x 453 16.00 x 20.00

CH2016SP 17.78 x 13.84 452 x 352 20.00 x 16.00

CH2020SP 17.78 x 17.84 452 x 453 20.00 x 20.00

CH2024SP 17.78 x 21.84 452 x 555 20.00 x 24.00

CH2416SP 21.78 x 13.84 553 x 352 24.00 x 16.00

CH2420SP 21.78 x 17.84 553 x 453 24.00 x 20.00

CH2424SP 21.78 x 21.84 553 x 555 24.00 x 24.00

CH3020SP 27.78 x 17.84 706 x 453 30.00 x 20.00

CH3024SP 27.78 x 21.84 706 x 555 30.00 x 24.00

CH3030SP 27.78 x 27.84 706 x 707 30.00 x 30.00

CH3624SP 33.78 x 21.84 858 x 555 36.00 x 24.00

CH3630SP 33.78 x 27.84 858 x 707 36.00 x 30.00

CH3636SP 33.78 x 33.84 858 x 860 36.00 x 36.00

Catalog #For use with Premier

Enclosures

A x B

CH1212DF 12.00 x 12.00

CH1612DF 16.00 x 12.00

CH2016DF 20.00 x 16.00

CH2020DF 20.00 x 20.00

CH2420DF 24.00 x 20.00

CH2424DF 24.00 x 24.00

CH3024DF 30.00 x 24.00

Catalog # Qty.For use with Premier

Enclosures

CH12MC 2 12” height or width









Note: Cannot be used in conjunction with depth adjustment brackets.


Type

4 Pa

nel E

nclo

sure




DIN Rail KitsDIN rail kits provide flexibility for mounting DIN type snap-on equipment. Three styles: TS32x15, slotted; TS35x7.5, slotted; TS35x15, slotted all attach to collar studs either horizontally or vertically. Three DIN rails, screws and channel nuts are provided. Finish: Yellow Zinc

Flexible Mounting StrapsFlexible mounting straps offer a versatile, horizontal or vertical mounting method inside enclosure body. Two designs: 1-hole or 3-hole pattern increase mounting flexibility and attach to enclosure collar studs. Flexible mounting strap kit contains two straps and hardware. Finish: Zinc Plated


Catalog # DescriptionFor use with

Premier Enclosures

CH12DR1P TS32 x 15, slotted 12” height or width




CH12DR3P TS35 x 7.5, slotted 12” height or width




CH12DRCP TS35 x 15, slotted 12” height or width





Premier Enclosures

CH12GS1 1-hole 12” height or width












Swing-out Rack FramesSwing-out rack frames allow mounting of EIA 19” rack mount equipment. Flexible pivoting framework provides access to back of equipment or other internal components. Designed for use with 24” wide Premier Series enclosures. Mounting hardware included. Swing-out rack frame holes are untapped and require screws and cage nuts for equipment mounting (order separately).Finish: ANSI Gray Polyester Powder

Universal Spacing [(5/8” (16mm), 5/8” (16mm), 1/2” (13mm)]

Rack Mounting AnglesRelay rack angles are designed for mounting EIA 19” rack mount equipment inside 24” wide enclosures. Fabricated from 14 gauge steel and zinc plated. Rack angles are mounted to enclosure flange with hardware provided. Rack mount angles are untapped and require screws and cage nuts for equipment mounting (order separately).Finish: Zinc Plated

Universal Spacing [5/8” (16mm), 5/8” (16mm), 1/2” (13mm)]


Catalog #For use with

Premier Enclosures

Mounting

Units

CH10URMA 20” height 10






Premier Enclosures

Mounting

Units

CH2424SF 24.00 x 24.00 11

CH3024SF 30.00 x 24.00 15

CH3624SF 36.00 x 24.00 18


Type

4 Pa

nel E

nclo

sure




Print PocketsPrint pockets provide a convenient place to store operation manuals, diagrams or other documents inside the enclosure. Thermoplastic pockets are gray and have cutaway areas for viewing contents. Pockets have adhesive backing for mounting inside on enclosure door.

HandlesPadlocking, key locking or non-locking handles are interchangeable with standard slotted quarter-turn flush latch on Premier Series enclosures. Available keyed alike or keyed different; please specify when ordering.

Security Latch InsertsSecurity latch inserts interchange with slotted quarter-turn flush latch and provide security and control access to interior of enclosure. Inserts include matching key.

CH3MDBLK

CH7MTLK

CH7MSLK


Catalog # Description

CHWMHNL Wall-mount handle, non-locking

CHWMHK-01 Wall-mount handle, key locking - keyed 01




CHWMHPTO Wall-mount handle, padlockable


CH7MTLK 7mm triangular latch insert

CH7MSLK 7mm square latch insert

CH3MDBLK 3mm double bit latch insert

Catalog # Length x Width

CH32170 6.00 x 6.00

CH32171 10.00 x 10.00




Pole Mounting KitsPole mounting kits allow installation of enclosure on round or rectangular poles. Kit includes hot dip galvanized after fabrication strut channel, stainless steel band and hardware for top and bottom mounting of enclosure.

HardwarePhillips head screws and cage nuts are available in #10-32, #12-24 or M6 and allow mounting of equipment to untapped holes in rack mounting angles and swing-out rack frame.

Depth Adjustment BracketsDepth adjustment brackets allow variable depth mounting of Premier Series accessories. Designed for use with 6”, 8” or 12” deep enclosures. Kit is available in quantities of 4 or 2 and includes mounting channel, adjustable mechanism and hardware. When enclosure has 6 collar studs, use two kits. Finish: Zinc Plated

Note: Pole diameter range 4” minimum to 12” maximum.


Catalog # Qty.For use with

Premier Enclosures

CH64AMK 4 6” depth or greater






Premier Enclosures

CH12PMK 12” width

CH16PMK 16” width

CH20PMK 20” width

CH24PMK 24” width

CH30PMK 30” width

Catalog # Screw Type

CHE2-MA-1032-PHMS-100 #10-32 Phillips


CHE2-MA-M6-PHMS-100 M6 Phillips

Catalog # Cage Nut Type

CHE2-MA-CN-1032-100 #10-32 Tapped

CHE2-MA-CN-1224-100 #12-24 Tapped

CHE2-MA-CN-M6-100 M6 Tapped

Note: Not for use with swing-out rack frame, dead front panel or swing-out panel.

Sold in bags of 100 pieces

Type

4 Pa

nel E

nclo

sure






• Swing-out panel kit

• NEMA terminal kit

• Window kits

• Floor stand kit

• Replacement handle




• Internal 3-point latching with a key locking and padlock handle












• Conforms to NEMA Standard for Type 3, Type 4, Type 12

Wall-Mount EnclosuresType 4 Single-Door with 3-Point Locking Data Sheet and Catalog Number

Enclosure

Enclosure Size


AxBxCGauge

Panel ConductivePanel Size

Height x Width

Catalog # in. mm. Catalog # Catalog # in. mm.

CH24206-43PT 24.00 x 20.00 x 6.00 609 x 508 x 152 16 CHAW2420P CHAW2420GP 20.87 x 16.87 530 x 429














3-pointlocking handle 3-point

locking handle

mounting feetprint pocket (supplied)

Section X-X

X

X

.375-16 collar stud(omit center studs where “A” is less than 36)

.375-16 collar stud(omit center studs where“B” is less than 36)

B C

B (**B)

B-4.75 (121)

C

A

A-4.75 (121)

A+1.25 (32)

A-2.75 (70)

B-2.75 (70)

CL

CL

CL

CL

optional panel

.44 (11)mounting hole (2PL)

Note: Dimensions: **B = (-2.50) if 12 inches wide; (-6.00) if wider than 12 inches.

Front View Side View

Wall-Mount EnclosuresType 4 Single-Door with 3-Point Locking Illustration Sheet and Catalog Number

Enclosure

Enclosure Size


AxBxCGauge


Height x Width










Type

4 Pa

nel E

nclo

sure




• Window kits

• Floor stand kit

• Lights


Construction• Enclosure and door are fabricated from (14) gauge steel


• Heavy duty continuous hinges with stainless steel hinge pins

• Internal 3-point latching with key locking and padlock handles

• Removable center post for easy panel installation

• Doors have a seamless poured in place gasket














Enclosure

Enclosure Size


AxBxC


Height x Width


CH244210-4D3PT 24.00 x 42.00 x 10.00 609 x 1067 x 254 CHAW4224P -- 38.87 x 20.87 987 x 530

CH304210-4D3PT 30.00 x 42.00 x 10.00 762 x 1067 x 254 CHAW4230P CHAW4230GP 38.87 x 26.87 987 x 682


CH306010-4D3PT 30.00 x 60.00 x 10.00 762 x 1524 x 254 CHAW6030P -- 56.87 x 26.87 1444 x 682



Wall-Mount EnclosuresType 4 Double-Door with 3-Point Locking Data Sheet and Catalog Number




rotation

Section X-X

B

A A-2.75 (70)A+1.25

(32)

B-6.00 (152)

A-4.75 (121)

B-4.75 (121)

B-2.75 (70)

CL

CL

mounting feet

body stiffener(omit where “A” is less than 30)

.375-16 collar stud(omit center studs where“A” is less than 36)

C

optional back panel

X

X

print pocket

(supplied)


3-point lockinghandle

Front View

Side View

Wall-Mount EnclosuresType 4 Double-Door with 3-Point Locking Illustration Sheet

Type

4 Pa

nel E

nclo

sure






• Leg stabilizer kit

• Touch-up paint




• Each door is secured to the body with a heavy duty continuous hinge on one side and easy-to-release stainless steel door clamps mounted to the other three sides




• Ground stud provided on doors

• Removable center post for complete front access

• Heavy gauge angle supports and .375-16 collar studs are provided for mounting optional panel

• Large lifting eyebolts are supplied

• Mounting legs are provided for floor mounting





• CSA C22.2 No. 94 Certified, Type 4 and Type 12


Ground-Mount EnclosuresType 4 Double-Door Floor-Standing Data Sheet and Catalog Number

Enclosure

Enclosure Size


AxBxC

PanelPanel Size

Height x Width

Catalog # in. mm. Catalog # in. mm.

CH624810-4FD 62.00 x 48.00 x 10.00 1575 x 1219 x 254 CHAW6048P 55.87 x 43.87 1419 x 1114








padlock hasp

panel support


mounting leg

optional back panel

lifting eye

removable center post

collar stud

Section X-X(enlarged)

X

B

A A-4.75 (121)

12.00(305)

C+.25 (6)

C-1.38 (35)

C

B-2.75 (70)

2.87(73)

X

Notes: Clamps are mounted along three sides of the enclosure door. Spacing between clamps along side opposite the hinge does not exceed 15 inches. Four lifting eyes are furnished when C dimension is 24” (610 mm). Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.


Ground-Mount EnclosuresType 4 Double-Door Floor-Standing Illustration Sheet

Type

4 Pa

nel E

nclo

sure






• Panel support kit

• Panel lifting kit


• Lights

• Window kits

Construction• Enclosure and doors are fabricated from (12) gauge steel










• Large lifting eyebolts

• Mounting legs







Enclosure

Enclosure Size


AxBxC

PanelPanel Size

Height x Width


CH604812-4FDQT 60.00 x 48.00 x 12.00 1524 x 1219 x 305 CHAW6048P 55.87 x 43.87 1419 x 1114





Ground-Mount EnclosuresType 4 Double-Door Floor-Standing with Quarter-Turn LatchesData Sheet and Catalog Number



Notes: Four lifting eyes are furnished when C dimension is 24” (610 mm). Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

panel support


mounting leg

optional back panel

lifting eye


collar stud


X

B

A A-4.75 (121)

12.00(305)

C+.25 (6)

C-1.38 (35)

C

B-2.75 (70)

2.87(73)

X

quarter-turn latches


Ground-Mount EnclosuresType 4 Double-Door Floor-Standing with Quarter-Turn LatchesIllustration Sheet

Type

4 Pa

nel E

nclo

sure









• Lights

• Window kits













• Mounting legs







Enclosure

Enclosure Size


AxBxC

PanelPanel Size

Height x Width


CH624810-4FD3PT 62.00 x 48.00 x 10.00 1575 x 1219 x 254 CHAW6048P 55.87 x 43.87 1419 x 1114





Ground-Mount EnclosuresType 4 Double-Door Floor-Standing with 3-Point LockingData Sheet and Catalog Number




3-pointlocking handle

3-point locking handle

rotation

panel support


mounting leg

optional back panel

lifting eye


collar stud


X

B

A

A-4.75 (121)

12.00(305)

C+.25 (6)

C-1.38 (35)

C

B-2.75 (70)

2.87(73)

X


Ground-Mount EnclosuresType 4 Double-Door Floor-Standing with 3-Point LockingIllustration Sheet

Type

4 Pa

nel E

nclo

sure





Accessories• Full and half panels

• Side and swing panels

• Channel mounting hardware

• Equipment rack mounts

• Touch-up paint




• Doors are secured to the body with a heavy duty continuous hinge on one side and easy-to-release stainless steel door clamps mounted to the other three sides






• Mounting channels are welded inside for locating panels or rack mount equipment along enclosure depth

• A variety of optional panels and accessories are available


• Easy access panels or rack mounts for housing optional equipment






• E.I.A. RS-310-D

Ground-Mount EnclosuresType 4 Free-StandingData Sheet



lifting eye

padlock hasp


mounting channelprint pocket(supplied)

B C

B-2.62 (67)

B-3.75 (95)

7.37(187)

3.50(89)

A-10.75 (273)

A

8.87(225)

D

D

CL

CL

Notes: Four lifting eyes are furnished when C dimension is 24” (610 mm). Clamps are mounted along three sides of the enclosure door. Spacing between clamps along side opposite the hinge does not exceed 15 inches. Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Front View

Side View

Ground-Mount EnclosuresType 4 Free-StandingIllustration Sheet and Catalog Number

Enclosure

Enclosure Size


AxBxC

D

Catalog # in. mm. in. mm.

CH722518-4FS 72.00 x 25.00 x 18.00 1829 x 635 x 457 29.12 740

CH723118-4FS 72.00 x 31.00 x 18.00 1829 x 787 x 457 29.12 740

CH723718-4FS 72.00 x 37.00 x 18.00 1829 x 940 x 457 29.12 740

CH722524-4FS 72.00 x 25.00 x 24.00 1829 x 635 x 610 29.12 740

CH723124-4FS 72.00 x 31.00 x 24.00 1829 x 787 x 610 29.12 740

CH723724-4FS 72.00 x 37.00 x 24.00 1829 x 940 x 610 29.12 740

Type

4 Pa

nel E

nclo

sure











• Lights

• Window kits



• Heavy duty continuous hinge with stainless steel hinge pin







• Provision for mounting fluorescent light









• E.I.A. RS-310-D

Ground-Mount EnclosuresType 4 Free-Standing with Quarter-Turn LatchesData Sheet and Catalog Number

Enclosure

Enclosure Size


AxBxC

D


CH722418-4FSQT 72.00 x 24.00 x 18.00 1829 x 609 x 457 29.12 739

CH723024-4FSQT 72.00 x 30.00 x 24.00 1829 x 762 x 609 29.12 739

CH723624-4FSQT 72.00 x 36.00 x 24.00 1829 x 914 x 609 29.12 739




lifting eye

mounting channel

C

8.87(225)

D

D


B

B-2.62 (67)

B-3.75 (95)

7.37(187)

3.50(89)

A-10.75 (273)

A

CL

CL



Ground-Mount EnclosuresType 4 Free-Standing with Quarter-Turn LatchesIllustration Sheet

Type

4 Pa

nel E

nclo

sure



Ground-Mount EnclosuresType 4 Free-Standing with 3-Point LockingData Sheet









• Lights

• Window kits




• Heavy duty continuous hinge with stainless steel hinge pin
















• E.I.A. RS-310-D



Ground-Mount EnclosuresType 4 Free-Standing with 3-Point LockingIllustration Sheet and Catalog Number


3-point handle lock

rotation

lifting eye


B C

B-2.62 (67)

B-3.75 (95)

7.37(187)

3.50(89)

A-10.75 (273)

A

8.87(225)

D

D

CL

CL

Front ViewSide View

Enclosure

Enclosure Size


AxBxC

D


CH602418-4FS3PT 60.00 x 24.00 x 18.00 1524 x 609 x 457 23.12 587

CH722418-4FS3PT 72.00 x 24.00 x 18.00 1829 x 609 x 457 29.12 739

CH723018-4FS3PT 72.00 x 30.00 x 18.00 1829 x 762 x 457 29.12 739

CH723618-4FS3PT 72.00 x 36.00 x 18.00 1829 x 914 x 457 29.12 739

CH603624-4FS3PT 60.00 x 36.00 x 24.00 1524 x 914 x 609 23.12 587

CH722424-4FS3PT 72.00 x 24.00 x 24.00 1829 x 609 x 609 29.12 739

CH723024-4FS3PT 72.00 x 30.00 x 24.00 1829 x 762 x 609 29.12 739

CH723624-4FS3PT 72.00 x 36.00 x 24.00 1829 x 914 x 609 29.12 739

CH723630-4FS3PT 72.00 x 36.00 x 30.00 1829 x 914 x 762 29.12 739

CH723636-4FS3PT 72.00 x 36.00 x 36.00 1829 x 914 x 914 29.12 739

Type

4 Pa

nel E

nclo

sure





• Center post


• Touch-up paint

• Climate control

• Mounting legs

• Rack mounting angles

• Swing out mounting frames





• Doors are secured to the body with a heavy duty concealed lift-off hinge and a 3-point padlock handle mechanism on each door

• Removable center post

• Doors have a fixed, oil-resistant gasket

• Ground stud provided on doors and bodies


• Large lifting eyes are integrated with sides of enclosure

• Mounting channels are welded inside for locating panels or rack mounts along enclosure depth, as well as mounting studs for fixed panels

• Swing panels, single full and single half panels can be installed in double-door enclosures when the center post is used


Application• Houses electrical controls and electrical instruments

in harsh environments

• Provides quick and easy access indoors and out

• Protects against circulating dust, falling dirt, dripping non-corrosive liquids, rain, sleet, ice, splashing and hose directed water

Standards• UL 508 Listed, Type 3R, Type 4, Type 4X, Type 12

• Conforms to NEMA Standard for Type 3R, Type 4, Type 4X, Type 12

• NSF Criteria C-2

• E.I.A. RS-310-D

Finish• Type 4 enclosures have a washed and phosphate

undercoat with ANSI 61 gray polyester powder inside and out

Ground-Mount EnclosuresType 4 EnviroShield™ Free-Standing with 3-Point Locking Data Sheet



bodystiffeners

adjustable back & side panel

mountingprovisions

padlock3-point locking

mechanism

lighting bracket

concealed lift-off hinges

integrated lifting eyes


adjustable top & bottom mounting

provisions

grounding & bonding provisions on door &

body

sloped trough collarC

C+2.09 (53)

B-3.94 (100)

Min=A-2.60 (66)Max=A-3.20 (81)

B/2-1.97 (50)

5.43(138)

4.09(104)

2.65(67)

2.00(51)

A

B

D

E


Front View

Side View

Enclosure

Enclosure Size


AxBxC

D E

Catalog # in. mm. in. mm. in. mm.

CHES-604812-4 60.00 x 48.00 x 12.00 1524 x 1219 x 305 65.98 1676 64.23 1631

CHES-604816-4 60.00 x 48.00 x 16.00 1524 x 1219 x 406 65.98 1676 64.23 1631

CHES-604820-4 60.00 x 48.00 x 20.00 1524 x 1219 x 508 65.98 1676 64.23 1631

CHES-604824-4 60.00 x 48.00 x 24.00 1524 x 1219 x 609 65.98 1676 64.23 1631

CHES-606012-4 60.00 x 60.00 x 12.00 1524 x 1524 x 305 65.98 1676 64.23 1631

CHES-606016-4 60.00 x 60.00 x 16.00 1524 x 1524 x 406 65.98 1676 64.23 1631

CHES-606020-4 60.00 x 60.00 x 20.00 1524 x 1524 x 508 65.98 1676 64.23 1631

CHES-606024-4 60.00 x 60.00 x 24.00 1524 x 1524 x 609 67.46 1713 64.23 1631

CHES-726012-4 72.00 x 60.00 x 12.00 1829 x 1524 x 305 77.98 1980 76.23 1936

CHES-726016-4 72.00 x 60.00 x 16.00 1829 x 1524 x 406 77.98 1980 76.23 1936

CHES-726020-4 72.00 x 60.00 x 20.00 1829 x 1524 x 508 77.98 1980 76.23 1936

CHES-726024-4 72.00 x 60.00 x 24.00 1829 x 1524 x 609 77.98 1980 76.23 1936

CHES-727212-4 72.00 x 72.00 x 12.00 1829 x 1829 x 305 77.98 1980 76.23 1936

CHES-727216-4 72.00 x 72.00 x 16.00 1829 x 1829 x 406 77.98 1980 76.23 1936

CHES-727220-4 72.00 x 72.00 x 20.00 1829 x 1829 x 508 77.98 1980 76.23 1936

CHES-727224-4 72.00 x 72.00 x 24.00 1829 x 1829 x 609 79.46 2018 76.23 1936

Ground-Mount EnclosuresType 4 EnviroShield™ Free-Standing with 3-Point Locking Illustration Sheet and Catalog Number

Type

4 Pa

nel E

nclo

sure



Note: Full and half panel for single-door, single and dual-access enclosures are (12) gauge steel and furnished with panel side brackets and all hardware necessary for channel and panel mounting. Half panels can be mounted in either the upper or lower portion of the enclosure. Free-standing design permits the panel to adjust along the depth of the enclosure. With dual-access enclosures, full and half panels can be mounted back-to-back.

Full Panel Mounting

Half Panel Mounting

Full Panel

Half Panel

(lower mount)

Half Panel

(upper mount)

B

B

B-1.62 (41)

B-1.62 (41)

A-1.62 (41)

A

A

A

C

C

C

Cpanel

side bracketincluded

(see illustra-tion #1 page 46 and detail

sheet page 47)

Free-Standing Enclosure AccessoriesType 4 Single-Door, Full and Half PanelIllustration Sheet and Catalog Number

PanelPanel Size

Height x Width

AxB

CFits Enclosure

Height x Width


CHAF6024P 47.87 x 19.87 1216 x 505 23.12 587 60.00 x 24.00 1524 x 610

CHAF6036P 47.87 x 31.87 1216 x 809 23.12 587 60.00 x 36.00 1524 x 914

CHAF7224P 59.87 x 19.87 1521 x 505 29.12 740 72.00 x 24.00 1829 x 610

CHAF7230P 59.87 x 25.87 1521 x 657 29.12 740 72.00 x 30.00 1829 x 762

CHAF7236P 59.87 x 31.87 1521 x 809 29.12 740 72.00 x 36.00 1829 x 914

Panel

Panel Size

Height x WidthAxB

CFits Enclosure

Height x Width


CHAF6024HP 24.75 x 19.87 629 x 505 23.12 587 60.00 x 24.00 1524 x 610

CHAF6036HP 24.75 x 31.87 629 x 809 23.12 587 60.00 x 36.00 1524 x 914

CHAF7224HP 30.75 x 19.87 781 x 505 29.12 587 72.00 x 24.00 1829 x 610

CHAF7230HP 30.75 x 25.87 781 x 657 29.12 587 72.00 x 30.00 1829 x 762

CHAF7236HP 30.75 x 31.87 781 x 809 29.12 587 72.00 x 36.00 1829 x 914

Full Panel (Single-Door) Half Panel (Single-Door)




Notes: Full panel for double-door, single and dual-access enclosures are (10) gauge steel and furnished with panel brackets, center post assembly, panel handle kit and all hardware necessary for channel and panel mounting. The center post assembly offers additional support of panel and equipment. Free-standing design permits the panel to adjust along the depth of the enclosure. With dual-access enclosures, full and half panels can be mounted back-to-back.

Full Panel Mounting

Full Panel

panel side bracket included(see illustration 1 page 46 and detail sheet page 47)

center post included withdouble-door full panel(see illustration #5 page 46)

B

D

C

C

AA-1.62

(41)

D

B-1.62(41)

Free-Standing Enclosure AccessoriesType 4 Single-Door, Full PanelIllustration Sheet and Catalog Number

PanelPanel Size

Height x Width

AxB

C DFits Enclosure

Height x Width

Catalog # in. mm. in. mm. in. mm. in. mm.

CHAF6048P 47.87 x 43.87 1216 x 1114 23.12 587 21.12 530 60.00 x 48.00 1524 x 1219

CHAF6060P 47.87 x 55.87 1216 x 1419 23.12 587 27.12 689 60.00 x 60.00 1524 x 1524

CHAF7248P 59.87 x 43.87 1521 x 1114 29.12 740 21.12 530 72.00 x 48.00 1829 x 1219

CHAF7260P 59.87 x 55.87 1521 x 1419 29.12 740 27.12 689 72.00 x 60.00 1829 x 1524

CHAF7272P 59.87 x 67.87 1521 x 1724 29.12 740 33.12 841 72.00 x 72.00 1829 x 1829

Type

4 Pa

nel E

nclo

sure



Note: Half panel for double-door, single and dual-access enclosures are (12) gauge steel and furnished with panel brackets and all hardware necessary for channel and panel mounting. A center post assembly or a double-door panel support bracket (catalog

number CHAFSUP2) for additional support of the panel is optional and sold separately. Free-standing design permits the panel to adjust along the depth of the enclosure. With dual-access enclosures, full and half panels can be mounted back-to-back.

panel side bracket included(see illustration #1 page 46and detail sheet page 47)

center post or double-door panel support bracket(sold separately)(see illustration #5 page 46)

Half Panel

(upper mount)

Half Panel

(lower mount)

Half Panel Mounting

B

D

C

C

A

A

D

B-1.62 (41)

PanelPanel Size

Height x Width

AxB

C DFits Enclosure

Height x Width


CHAF6048HP 24.75 x 43.87 629 x 1114 23.12 587 21.12 536 60.00 x 48.00 1524 x 1219

CHAF7248HP 30.75 x 43.87 781 x 1114 29.12 740 21.12 536 72.00 x 48.00 1829 x 1219

CHAF7260HP 30.75 x 55.87 781 x 1419 29.12 740 7.12 181 72.00 x 60.00 1829 x 1524

CHAF7272HP 30.75 x 67.87 781 x 1724 29.12 740 33.12 841 72.00 x 72.00 1829 x 1829

Free-Standing Enclosure AccessoriesType 4 Double-Door, Half PanelIllustration Sheet and Catalog Number




Side Panel

Side Panel Mounting Center Post Assembly

* Back panels restrict the movement of side panels and will prohibit mounting in some depths. See detail sheet for back panel spacing.

B

C

C B

B

A A-2.12 (54)

A

B-1.62 (41)

PanelPanel Size

Height x Width

AxB

C Fits Enclosure

Catalog # in. mm. in. mm. in. mm in. mm.

CHAF6018SP 48.37 x 13.87 1229 x 340 23.12 587 60.00 1524 18.00 457

CHAF7218SP 60.37 x 13.87 1533 x 340 29.12 740 72.00 1829 18.00 457

CHAF7224SP 60.37 x 19.87 1533 x 505 29.12 740 72.00 1829 24.00 610

Center

PostA B

Fits

EnclosureHeight


CHAF60CPS 58.37 1483 23.12 587 60.00 1524

CHAF72CPS 70.37 1787 29.12 740 72.00 1829

Free-Standing Enclosure AccessoriesType 4 Side Panel and Center PostIllustration Sheet and Catalog Number

Height Depth*

Side Panel Center Post

Side panels are (12) gauge steel and furnished with hardware necessary for channel mounting. They will fi t any width enclosure and are adjustable along its depth, however, when full or half panels are installed, movement will be restricted and with some depths make side mounting prohibitive.

Center post assembly is furnished with all double-door full panels and includes hardware necessary for channel and panel mounting. The center post is optional on double-door half panels and swing panel mounting and must be ordered separately. It attaches to the top and bottom channels making it adjustable along the depth of the enclosure. See illustration #5 on the Detail Sheet on page 46.

Type

4 Pa

nel E

nclo

sure



Note: Full swing panel and half swing panel for single-door, single and dual-access enclosures are (12) gauge steel, have a dual hinge swing panel bracket and furnished with panel brackets and all hardware necessary for channel and panel mounting. Panels can be installed so they hinge on either the left or right side. In addition, half panels can be mounted in either the upper or lower portion of the enclosure. Free-standing design permits the panel to be adjustable along the depth of the enclosure. The dual hinge will allow the inner panel to swing completely out of the door opening when within 5.50 inches of the front. With dual-access enclosures, full and half swing panels

can be mounted back-to-back.

Full Swing Panel

hinge

3.18(81)

3.18(81)

2.06(52)

2.06(52)

hinge

hinge

swing panel bracket assembly included

(see detail sheet page 48)

Full Swing Panel Mounting Half Swing Panel Mounting

panel side bracket included (see illus-tration #1 page 46 and detail sheet page 48)

Half Swing Panel

(lower mount)

Half Swing Panel

(upper mount)

B

B

C

C

A

AC

AC

Free-Standing Enclosure AccessoriesType 4 Single-Door, Full and Half Swing PanelIllustration Sheet and Catalog Number

PanelPanel Size

Height x Width

AxB

CFits Enclosure

Height x Width


CHAF6024SWP 47.87 x 18.75 1216 x 476 23.12 587 60.00 x 24.00 1524 x 610

CHAF6036SWP 47.87 x 30.75 1216 x 781 23.12 587 60.00 x 36.00 1524 x 914

CHAF7224SWP 59.87 x 18.75 1521 x 476 29.12 740 72.00 x 24.00 1829 x 610

CHAF7230SWP 59.87 x 24.75 1521 x 629 29.12 740 72.00 x 30.00 1829 x 762

CHAF7236SWP 59.87 x 30.75 1521 x 781 29.12 740 72.00 x 36.00 1829 x 914

PanelPanel Size

Height x Width

AxB

CFits Enclosure

Height x Width


CHAF6024HSWP 47.87 x 18.75 1216 x 476 23.12 587 60.00 x 24.00 1524 x 610

CHAF6036HSWP 47.87 x 30.75 1216 x 781 23.12 587 60.00 x 36.00 1524 x 914

CHAF7224HSWP 59.87 x 18.75 1521 x 476 29.12 740 72.00 x 24.00 1829 x 610

CHAF7230HSWP 59.87 x 24.75 1521 x 629 29.12 740 72.00 x 30.00 1829 x 762

CHAF7236HSWP 59.87 x 30.75 1521 x 781 29.12 740 72.00 x 36.00 1829 x 914

Full Swing Panel (Single Door) Half Swing Panel (Single Door)




Note: Full swing panel and half swing panel for double-door, single and dual-access enclosures are (12) gauge steel, have a dual hinge swing panel bracket and are furnished with hardware necessary for side channel mounting. A center post assembly and

center bracket must be ordered separately. Panels can be installed so they hinge either on the left or right side. In addition, half panels can be mounted in either the upper or lower portion of the enclosure. Free-standing design permits the panel to adjust along the depth of the enclosure. The dual hinge will allow the inner panel to swing completely out of the door opening when within 5.50 inches of the front. With dual-access enclosures,full and half swing panels can be mounted back-to-back.

hinge

hinge

Swing Panel Mounting

swing panelbracket assembly included (see detail sheet page 48)

center post and panel mounting center bracket (sold separately)(see illustration #2 and #5 page 46)

Half Swing Panel

(lower mount)Full Swing Panel

BB

C

C

A

3.18(81)

3.18(81)

A center post assembly and center bracket must be ordered separately.

panel mountingcenter bracket(sold separately)(see illustration #2 page 46)

Free-Standing Enclosure AccessoriesType 4 Double-Door, Full and Half Swing PanelIllustration Sheet and Catalog Number

PanelPanel Size

Height x Width

AxB

CFits Enclosure

Height x Width


CHAF6024SWP 47.87 x 18.75 1216 x 476 23.12 587 60.00 x 24.00 1524 x 610

CHAF7224SWP 59.87 x 18.75 1521 x 476 29.12 740 72.00 x 24.00 1829 x 610

CHAF7230SWP 59.87 x 24.75 1521 x 629 29.12 740 72.00 x 30.00 1829 x 762

CHAF7236SWP 59.87 x 30.75 1521 x 781 29.12 740 72.00 x 36.00 1829 x 914

PanelPanel Size

Height x Width

AxB

CFits Enclosure

Height x Width


CHAF6024HSWP 47.87 x 18.75 1216 x 476 23.12 587 60.00 x 24.00 1524 x 610

CHAF7224HSWP 59.87 x 18.75 1521 x 476 29.12 740 72.00 x 24.00 1829 x 610

CHAF7230HSWP 59.87 x 24.75 1521 x 629 29.12 740 72.00 x 30.00 1829 x 762

CHAF7236HSWP 59.87 x 30.75 1521 x 781 29.12 740 72.00 x 36.00 1829 x 914


Type

4 Pa

nel E

nclo

sure




Illustration 1 Illustration 2

Illustration 3

Illustration 4Illustration 5

See catalog page 43

channel spring nut

channel spring nut

channel spring nut

panel nut

panel bolt

channel mounting hardware

panel support bracket

install panel bolt in this hole for top of panel

support

panel bolt

panel nut

panel bolthardware

panel bolt hardware

panel nut

panel mounting studpanel nut

panel nut

panel mounting stud

panel mounting stud




side bracket

center post

center post

center post

post bracket

center bracket

bracket mounting hardware




channel spring nut

Miscellaneous Accessories

Catalog # Description Illustration Quantity

CHAFSBRKT1 Panel mounting side bracket 1 1

CHAFCBRKT3 Panel mounting center bracket 2 3

CHAFCMH3 Channel mounting hardware 3 3

CHAFPSUP2 Double-door panel support bracket 4 2

See page 43 Center post 5 1

Free-Standing Enclosure AccessoriesType 4Miscellaneous AccessoriesIllustration Sheet and Catalog Number



enclosure width -5.75 (146)

Single Door(section view showing full panels mounted back-to-back)

Double Door(section view showing full panels mounted back-to-back)

1/2 enclosure width -5.75 (146)

(of enclosure)

2.87 min (73)

3.00 min (76)

3.75 min (95)

2.87(73)

CL

2.87(73)

2.87 min (73)


Free-Standing Enclosure DetailsType 4Panel and EnclosureDetail Sheet

Type

4 Pa

nel E

nclo

sure




Single Door(section view showing swing panels mounted back-to-back)

Double Door(section view showing swing panels mounted back-to-back)

5.00 min(127)

3.18(81)

3.18(81)

(of enclosure)

CL

2.87(73)

2.87 min (73)

2.87(73)

2.87 min (73)


5.00 min(127)


Free-Standing Enclosure DetailsType 12Swing Panel and EnclosureDetail Sheet



Equipment Mounting Holes to Accept

#10-32, #12-24, or M6Cage Nuts

(Sold Separately)

L

Angle Profi le

3.50(89)

1.50(38)

.75(19)

1.44(36)

O.D.

1.50(38)

O.D.

1.625(41)

O.D.

2.29(58)

Equipment Mounting Holesto Accept #10-32, #12-24, or

M6 Cage Nuts(Sold Separately)

Hole Pattern

A = 1.75 (44)B = .625 (16)C = .500 (13)D = .295 (7)E = .250 (6)

A

.375 (9)Square

Hole

BC

D

EB

Hole Pattern

A = 1.75 (44)B = .625 (16)C = .500 (13)D = .295 (7)E = .250 (6)

A

.375 (9)Square

Hole

BC

D

EB

Kit contains two (2) full length ‘U’ angles, installation instructions,and hardware necessary to mount in single-door enclosures.Yellow Zinc fi nish.

L

Heavy duty rack mounting angles are designed for mounting 19” (482mm) equipment in free-standing enclosures. A center post

assembly, “CHAFxxCPS” on page 43, and a panel mounting center bracket, “CHAFCBRKT3” on page 46, (each sold

separately) are required when mounting in any double door enclosure. Mounting holes are spaced at the 19” “EIA” standard and are provided to accept #10-32, #12-24, or M6 cage nuts (sold in packages of 100), on page 50.

Note: L-shaped angles are universaland can be rotated to accommodate19” or 23” EIA mounting equipment.


Free-Standing Enclosure Accessories Rack Mounting AnglesIllustration Sheet and Catalog Number

Mounting

Angles

Fits EnclosureHeight

L Mounting

U’s


CHES-48RMA-L 48.00 1219 42.00 1067 24

CHES-60RMA-L 60.00 1524 54.25 1378 31

CHES-72RMA-L 72.00 1829 66.50 1689 38

CHES-90RMA-L 90.00 2286 78.75 2000 45

Mounting

Angles


L Mounting

U’s


CHES-48RMA-U 48.00 1219 42.00 1067 24

CHES-60RMA-U 60.00 1524 54.25 1378 31

CHES-72RMA-U 72.00 1829 66.50 1689 38

CHES-90RMA-U 90.00 2286 78.75 2000 45

‘L’ Shaped Mounting Angles

‘U’ Shaped Mounting Angles

Kit contains two (2) full length ‘L’ angles, installation instructions,and hardware necessary to mount in single-door enclosures.Yellow Zinc fi nish.

Angle Profi le

Type

4 Pa

nel E

nclo

sure



Heavy duty swing-out rack mounting frames are designed for mounting 19” (482mm) equipment in free standing enclosures. A center post assembly, “CHAFxxCPS” on

page 43 and panel mounting center bracket, “CHAFCBRKT3” on page 46, (each

sold separately) are required when mounting in any double-door enclosure. Mounting holes are spaced per the “EIA” standard and are provided to accept #10-32, #12-24 or M6 cage nuts (sold in packages of 100). Swing-out rack mounting frames have white powder coated fi nish.

Sold in bags of (100)

L

19.47(494)O.D.

Equipment Mounting Holes

to Accept #10-32, #12-24, or M6

Cage Nuts(Sold Separately -

See Below)

Hole Pattern

A = 1.75 (44)B = .625 (16)C = .500 (13)D = .295 (7)E = .250 (6)

A

.375 (9)Square

Hole

BC

D

EB


Mounting

Angles


L


CHES-48SORMF 48.00 1219 36.91 937

CHES-60SORMF 60.00 1524 49.16 1248

CHES-72SORMF 72.00 1829 59.66 1515

CHES-90SORMF 90.00 2286 77.18 1960

Swing-out Rack Mounted Frame

Free-Standing Enclosure Accessories Frames & FastenersIllustration Sheet and Catalog Number






CHE2-MA-CN-1032-100 #10-32 Tapped

CHE2-MA-CN-1224-100 #12-24 Tapped




Floor stand kits are intended for use with EnviroShield™ Type 4X, Type 4 and Type 12 enclosures where fl oor support is required. Each kit consists of two (10) gauge legs and hardware for mounting. At the base of each leg is a pre-punched plate (see drawing). Steel kits have a gray polyester powder paint fi nish. Stainless steel kits are fabricated from 304 stainless steel. Standard fl oor stand kits are 12 inches (305 mm) high. For special heights, special material or non-standard construction, consult factory.

.50 D hole(13)

4.62(117)

7.87(200)

A B

Base 12 - 16 Deep

CL

4.62(117)

.50 D hole(13)

7.87(200)

A

B

C

Base 20 - 24 Deep

9.87(251)

7.87(200)

12.00(305)

Floor Stand Kit


Catalog # A B C

Steel in. mm. in. mm. in. mm.

CHMFK12 12.00 305 10.06 256 - -

CHMFK16 16.00 406 14.06 357 - -

CHMFK20 20.00 508 18.06 459 8.00 203

CHMFK24 24.00 610 22.06 560 10.00 254

Free-Standing Enclosure AccessoriesFloor Stand & Stabilizer KitsIllustration Sheet and Catalog Number

Type

4 Pa

nel E

nclo

sure

s


Type 4 Panel Enclosures

Type 4X Panel Enclosures



JIC Enclosures Type 4X Lift-Off Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54-55JIC Enclosures Type 4X Lift-Off Cover, Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56-57JIC Enclosures Type 4X JIC Continuous Hinge Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58-59JIC Enclosures Type 4X JIC Continuous Hinge Cover Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-61JIC Enclosures Type 4X JIC Continuous Hinge Cover Quarter-Turn Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62-63Wall-Mount Enclosures Type 4X Single-Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64-65Wall-Mount Enclosures Type 4X Single-Door, Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66-67Wall-Mount Enclosures Type 4X Premier™ Quarter-Turn Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68-71Premier™ Series Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72-77Wall-Mount Enclosures Type 4X Single-Door 3-Point Locking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78-79Wall-Mount Enclosures Type 4X Double-Door 3-Point Locking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80-81Ground-Mount Enclosures Type 4X Double-Door Floor Standing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82-83Ground-Mount Enclosures Type 4X Double-Door Floor Standing, Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84-85Ground-Mount Enclosures Type 4X Double-Door Floor-Standing Quarter-Turn Latches . . . . . . . . . . . . . . . . . . 86-87Ground-Mount Enclosures Type 4X Double-Door Floor-Standing 3-Point Locking . . . . . . . . . . . . . . . . . . . . . . . . 88-89Ground-Mount Enclosures Type 4X Single-Door Free-Standing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90-91Ground-Mount Enclosures Type 4X Single-Door Free-Standing Quarter-Turn Latches . . . . . . . . . . . . . . . . . . . . 92-93Ground-Mount Enclosures Type 4X Single-Door Free-Standing 3-Point Locking . . . . . . . . . . . . . . . . . . . . . . . . . . 94-95Ground-Mount Enclosures Type 4X Single-Door Dual Access Free-Standing 3-Point Locking . . . . . . . . . 96-97Ground-Mount Enclosures Type 4X Double-Door Free-Standing 3-Point Locking . . . . . . . . . . . . . . . . . . . . . . . . . 98-99Ground-Mount Enclosures Type 4X Double-Door Dual Access Free-Standing 3-Point Locking . . . . . . . . . 100-101Ground-Mount Enclosures Type 4X Double-Door EnviroShield™ Free-Standing 3-Point Locking . . . . . . . 102-103Free-Standing Enclosure Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104-115

Ty

pe

4X

Pan

el E

nclo

sure

s

Type

4X

Pane

l Enc

losu

res



Construction• Enclosure and cover are fabricated from (16) gauge, Type 304

or Type 316L stainless steel






Seamless, poured in place gasket

JIC EnclosuresType 4X Lift-Off Cover Data Sheet


• Intended for indoor or outdoor use where a corrosive environment exists

• Protects against corrosion, windblown dust and rain, splashing water and hose directed water

Standards• UL 508 Listed, Type 4X, Type 4, Type 12 and Type 13

• CSA C22.2 No. 94 Certified, Type 4X, Type 4, Type 12 and Type 13

• Conforms to NEMA Standard for Type 4X, Type 4, Type 12 and Type 13


• Meets NEMA 3R requirements

Finish• Cover and sides of body have a smooth #4

brushed finish




• Terminal blocks





CH443-4XSLCCH643-4XSLCCH664-4XSLCCH864-4XSLCCH884-4XSLC

CH1084-4XSLC

CH12105-4XSLCCH14126-4XSLC

CH16146-4XSLC

clampmounting feet

weld nut(4PL)

Cover Clamp Layout

Front View

Side View

B

B-2.00 (51)

B-1.75 (44)

A

D

D

E

A-1.75 (44)

A-1.00 (25)

B-1.00 (25)

A+.75 (19)

FF C

optional panel


C-.46 (12)


JIC EnclosuresType 4X Lift-Off CoverIllustration Sheet and Catalog Number

Enclosure

Catalog #

Stainless Steel

Enclosure Size


AxBxC

D E FPanel

Catalog #

Panel Size

Height x Width

Type 304 Type 316L in. mm. in. mm. in. mm. in. mm. Painted Conductive in. mm.

CH443-4XSLC CH443-4XSS6LC 4.00 x 4.00 x 3.00 102 x 102 x 76 2.00 51 - - 2.00 51 - - - -

CH643-4XSLC CH643-4XSS6LC 6.00 x 4.00 x 3.00 152 x 102 x 76 3.00 76 - - 2.00 51 CHAW64P CHAW64GP 4.87 x 2.87 124 x 73







CH16146-4XSLC CH16146-4XSS6LC 16.00 x 14.00 x 6.00 406 x 356 x 152 2.00 51 8.00 203 3.00 76 CHAW1614P CHAW1614GP 14.87 x 12.87 378 x 327

Type

4X

Pane

l Enc

losu

res



Construction• Enclosure and cover are fabricated from (14) gauge, Type

5052-H32 aluminum



• Each door has a print pocket and padlock hasp with sealing hole provision







Standards• UL 508 Listed, Type 4, Type 4X, Type 12 and Type 13

• CSA C22.2 No. 94 Certified, Type 4, Type 4X, Type 12 and Type 13

• Conforms to NEMA Standard for Type 4, Type 4X, Type 12 and Type 13



Finish• Cover and sides of body have a smooth #4 brushed finish




• Terminal blocks



JIC EnclosuresType 4X Lift-Off Cover, AluminumData Sheet




CH443-4XALCCH643-4XALCCH664-4XALCCH864-4XALCCH884-4XALC

CH1084-4XALC

CH12105-4XALCCH14126-4XALC

CH16146-4XALC

Cover Clamp Layout

clampmounting feet

weld nut(4PL)

B

A

D

D

E

A-1.75 (44)

A+.75 (19)

CFF

B-2.00 (51)

B-1.75 (44)

optional panel


C-.46 (12)

A-1.00 (25)

B-1.00 (25)


Front View

Side View

JIC EnclosuresType 4X Lift-Off Cover, AluminumIllustration Sheet and Catalog Number

Enclosure

Enclosure Size


AxBxC

D E FPanel

Catalog #

Panel Size

Height x Width

Catalog # in. mm. in. mm. in. mm. in. mm. Steel Conductive in. mm

CH443-4XALC 4.00 x 4.00 x 3.00 102 x 102 x 76 2.00 51 - - 2.00 51 - - - -

CH643-4XALC 6.00 x 4.00 x 3.00 152 x 102 x 76 3.00 76 - - 2.00 51 CHAW64P CHAW64GP 4.87 x 2.87 124 x 73







CH16146-4XALC 16.00 x 14.00 x 6.00 406 x 356 x 152 2.00 51 8.00 203 3.00 76 CHAW1614P CHAW1614GP 14.87 x 12.87 378 x 327

Type

4X

Pane

l Enc

losu

res



Construction• Enclosure and cover are fabricated from (16) gauge, Type 304



• Cover is secured to the body with a stainless steel continuous hinge and pin on one side and easy-to-operate stainless steel screw clamps mounted to the opposite side



• #10-32 weld nuts are provided for mounting optional panel














• Terminal blocks



JIC EnclosuresType 4X Continuous Hinge CoverData Sheet




CH644-4XSCHCCH664-4XSCHCCH864-4XSCHCCH884-4XSCHC

CH1084-4XSCHC

CH12106-4XSCHCCH12126-4XSCHCCH14126-4XSCHC

CH16146-4XSCHC

Cover Clamp Layout

clampmounting feet

weld nut(4PL)

continuous hinge

B

CF F

B-2.00 (51)

B-1.75 (44)

A

D

D

E

A+.75 (19)

A-1.75 (44)

A-1.00 (25)

B-1.00 (25)

optional panel


C-.46 (12)


Front View

Side View

JIC EnclosuresType 4X Continuous Hinge CoverIllustration Sheet and Catalog Number

Enclosure

Catalog #

Enclosure Size


AxBxC

D E FPanel

Catalog #

Panel Size

Height x Width

Type 304 Type 316L in. mm. in. mm. in. mm. in. mm. Steel Conductive in. mm.

CH644-4XSCHC CH644-4XSS6CHC 6.00 x 4.00 x 4.00 152 x 102 x 102 3.00 76 - - 2.00 51 CHAW64P CHAW64GP 4.87 x 2.87 124 x 73








CH16146-4XSCHC CH16146-4XSS6CHC 16.00 x 14.00 x 6.00 406 x 356 x 152 2.00 51 8.00 203 3.00 76 CHAW1614P CHAW1614GP 14.87 x 12.87 376 x 327

Type

4X

Pane

l Enc

losu

res



Construction• Enclosure and cover are fabricated from (14) gauge, Type

5052-H32 aluminum


• Cover is secured to the body with an aluminum continuous hinge and pin on one side and easy-to-operate stainless steel screw clamps mounted to the opposite side







Standards• UL 508 Listed, Type 4, Type 4X, Type 12 and

Type 13





Finish• Cover and sides of body have a smooth #4

brushed finish




• Terminal blocks



JIC EnclosuresType 4X Continuous Hinge Cover, Aluminum Data Sheet




CH644-4XACHCCH664-4XACHCCH864-4XACHC

CH1084-4XACHC

CH12106-4XACHCCH12126-4XACHCCH14126-4XACHC

CH16146-4XACHC

clampmounting feet

continuous hinge

weld nut(4PL)

Cover Clamp Layout

B

A+.75 (19)

A

D

D

A-1.75 (44)

F F

F

B-2.00 (51)

B-1.75 (44)

C

optional panel


C-.46 (12)

A-1.00 (25)

B-1.00 (25)


Front View

Side View

Enclosure

Enclosure Size


AxBxC

D E FPanel

Catalog #

Panel Size

Height x Width

Catalog # in. mm. in. mm. in. mm. in. mm. Steel Conductive in. mm.

CH644-4XACHC 6.00 x 4.00 x 4.00 152 x 102 x 102 3.00 76 - - 2.00 51 CHAW64P CHAW64GP 4.87 x 2.87 124 x 73







CH16146-4XACHC 16.00 x 14.00 x 6.00 406 x 356 x 152 2.00 51 8.00 203 3.00 76 CHAW1614P CHAW1614GP 14.87 x 12.87 378 x 327

JIC EnclosuresType 4X Continuous Hinge Cover, Aluminum Illustration Sheet and Catalog Number

Type

4X

Pane

l Enc

losu

res



Construction• Enclosure and cover are fabricated from (16) gauge stainless steel


• Stainless steel continuous hinge and pin









Standards• UL 508 Listed, Type 3R, Type 4, Type 4X, Type 12

• CSA C22.2 No. 94 Certified, Type 3R, Type 4, Type 4X and Type 12

• Conforms to NEMA Standards for Type 3, Type 3R, Type 4, Type 4X and Type 12

• Conforms to JIC Standards EGP-1-1967





• JIC terminal kits

• Window kits

• Locks and latches

JIC EnclosuresType 4X Continuous Hinge Cover with Quarter-Turn Latches Data Sheet





Quarter-Turn Latch

Layout

CH863.5-4XSQTCH864-4XSQTCH644-4XSQTCH664-4XSQTCH866-4XSQTCH1084-4XSQTCH1086-4XSQT

CH12105-4XSQTCH12126-4XSQTCH14126-4XSQTCH16146-4XSQTCH12108-4XSQTCH14128-4XSQTCH161410-4XSQT

C

optional panel

C-.46 (12)

mounting feet

continuous hinge

B

B-1.00 (25)

A-1.00 (25)

B-2.00 (51)

B-1.75 (44)

D

D

E

AA+.75 (19)

A-1.75 (44)


weld nut(4PL)

quarter-turn

latches

omit center latch when A is 12 or greater

omit top & bottom latches when A is 10

or less

Front View

Side View

Enclosure

Enclosure Size


AxBxC

D EPanel

Catalog #

Panel Size

Height x Width

Catalog # in. mm. in. mm. in. mm. Steel Conductive in. mm.

CH644-4XSQT 6.00 x 4.00 x 4.00 152 x 102 x 102 - - 3 76 CHAW64P CHAW64GP 4.87 x 2.87 124 x 73


CH863.5-4XSQT 8.00 x 6.00 x 3.50 203 x 152 x 89 - - 4 101 CHAW86P CHAW86GP 6.87 x 4.87 174 x 124



CH12105-4XSQT 12.00 x 10.00 x 5.00 305 x 254 x 127 3 76 - - CHAW1210P CHAW1210GP 10.87 x 8.87 276 x 174









JIC EnclosuresType 4X Continuous Hinge Cover with Quarter-Turn Latches Illustration Sheet and Catalog Number

Type

4X

Pane

l Enc

losu

res



Construction• Enclosure and door are fabricated from (14) gauge, Type 304 or Type

316L stainless steel


• Doors are secured to the body with a heavy duty stainless steel continuous hinge and pin on one side and easy-to-release stainless steel door clamps mounted to the other three sides








Finish• Door and sides of body have a smooth #4

brushed finish



• Terminal blocks

• Floor stand kit








padlock hasp



B

B (**B)

A+1.25 (32)

A-2.75 (70)

B-2.75 (70)

A CL

CL

3.50(89)

3.50(89)

mounting feet

Section X-X


.375-16 collar stud(omit center studs where “B” is less than 36)

B-4.75 (121)

A (-4.75) (-121)

CL

CL


Notes: Dimensions: **B = (-2.50) if 12 inches wide; (-6.00) if wider than 12 inches.

Front View

X

X

C

optional panel

C

Side View

Wall-Mount Enclosures Type 4X Single-DoorData and Illustration Sheet




Notes: Clamps are mounted along three sides of the enclosure door. Spacing between clamps along side opposite the hinge does not exceed 15 inches. Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Enclosure

Catalog #

Enclosure Size


AxBxC

Panel

Catalog #

Panel Size

Height x Width

Type 304 Type 316L in. mm. Steel Conductive in. mm.

CH16126-4XS CH16126-4XSS6 16.00 x 12.00 x 6.00 406 x 305 x 152 CHAW1612P CHAW1612GP 13.00 x 9.00 330 x 229





CH24126-4XS CH24126-4XSS6 24.00 x 12.00 x 6.00 610 x 305 x 152 CHAW2412P -- 21.00 x 9.00 533 x 229


































CH363612-4XS CH363612-4XSS6 36.00 x 36.00 x 12.00 914 x 914 x 305 CHAW3636P -- 32.87 x 32.87 835 x 835







Wall-Mount Enclosures Type 4X Single-DoorCatalog Number

Type

4X

Pane

l Enc

losu

res



Finish• Door and sides of body have a smooth #4 brushed finish



• Terminal blocks

• Floor stand kit


Construction• Enclosure and door are fabricated from (14) gauge, Type 5052-

H32 aluminum


• Doors are secured to the body with a heavy duty aluminum continuous hinge and pin on one side and easy to operate stainless steel door clamps mounted to the other three sides













Enclosure

Enclosure Size


AxBxC

Panel

Catalog #

Panel Size

Height x Width

Catalog # in. mm. Steel Conductive in. mm.

CH16126-4XA 16.00 x 12.00 x 6.00 406 x 305 x 152 CHAW1612P CHAW1612GP 13.00 x 9.00 330 x 229


















Wall-Mount Enclosures Type 4X Single-Door, Aluminum Data Sheet and Catalog Number




Enclosure

Enclosure Size


AxBxC

Panel

Catalog #

Panel Size

Height x Width

Catalog # in. mm. Steel Conductive in. mm.














padlock hasp


mounting feet

X

X

Section X-X


body stiffener (omit where “B” is less than 30)

.375-16 collar stud (omit center studs where “A” is less than 36)

.375-16 collar stud (omit center studs where “B” is less than 36)

B

B (**B)

A+1.25 (32)

A

A-4.75 (121)

3.50(89)

3.50(89)

B-4.75 (121)

C

C

CL

CL

CL

CL

A-2.75 (70)

B-2.75 (70)

optional panel


Notes: Dimensions: **B = (-2.50) if 12 inches wide; (-6.00) if wider than 12 inches. Clamps are mounted along three sides of the enclosure door. Spacing between clamps along side opposite the hinge does not exceed 15 inches. Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Front View

Side View

Wall-Mount Enclosures Type 4X Single-Door, Aluminum Data Sheet and Catalog Number

Type

4X

Pane

l Enc

losu

res



Construction• Enclosure and door are fabricated from code gauge Type 304



• Hardware kit provided contains grounding hardware, .312-18 flanged hex nuts for panel mounting and sealing washers for body mounting holes


divert liquid contaminants away from door opening

• Reduced width flange design increases enclosure opening

• Ground stud provided in enclosure body

• .312-18 collar studs are provided for mounting optional Premier Series panels

• Enclosure mounting holes in body provided for direct mounting or optional mounting feet

• Utility bracket provides wire management and accessory mounting options

Door Construction• Doors are secured to the body with a unique spring-loaded

hidden hinge design on one side and slotted quarter-turn flush latch(es) on the opposite side








• Protects against corrosion, circulating and windblown dust, falling dirt, dripping non-corrosive liquids, rain, splashing water and hose directed water

Standards• UL 508 Listed, Type 4, Type 4X and Type 12

• cUL Listed, Type 4, Type 4X and Type 12

• Conforms to NEMA Standard for Type 4, Type 4X and Type 12


Accessories• Premier Series panels

• NEMA panel adapters

• Depth adjustment brackets

• Print pockets

• Padlockable or keyed handles

• Security latch inserts

• Mounting foot kits

• EIA/TIA rack mounting angles

• Swing-out panels

• See Premier Series Accessories pages

Wall-Mount Enclosures Type 4X Premier™ Series with Quarter-Turn LatchesData Sheet




Enclosure Catalog #

Type 304 Stainless Steel

Enclosure Size


AxBxC

Door/

BodyPanel

Panel Size

Height x

Width

Mounting

DxE

Window Size

FxGLatch

J

Solid Door Window Door in. mm. Gauge Catalog # in. mm. in. mm. in. mm Qty. in. mm.

CH1084-SDSS4 - 10 x 8 x 4 254 x 203 x 02 16/16 CH108P 8 x 6 203 x 152 8.5 x 6.37 216 x 162 - - 1 5 127



CH12126-SDSS4 CH12126-SDWSS4 12 x 12 x 6 305 x 305 x 152 16/16 CH1212P 10 x 10 254 x 254 10.5 x 10.37 267 x 264 8.25 x 7.00 210 x 178 1 6 152



























See dimensional drawings on page 71.

Wall-Mount Enclosures Type 4X Premier™ Series with Quarter-Turn LatchesCatalog Number

Type

4X

Pane

l Enc

losu

res




See dimensional drawings on page 71.

Enclosure

Catalog #

Type 316L

Stainless Steel

Enclosure Size


AxBxC

Door/

Body

Steel

Panel

Stainless

Steel

Panel

Panel Size

Height x Width

Mounting

DxELatch

J

Solid Door in. mm. Gauge Catalog # Catalog # in. mm. in. mm. Qty in. mm.

CH1084-SDSS6 10.00 x 8.00 x 4.00 254 x 203 x 102 16/16 CH108P CH108PSS4 8.00 x 6.00 203 x 152 8.50 x 6.37 216 x 162 1 5.00 127


























CH423612-SDSS6 42.00 x 36.00 x 12.00 1067 x 914 x 305 14/14 CH4236P CH4236PSS4 40.00 x 34.00 1016 x864 40.50 x 34.37 1029 x 873 3 5.00 127



Wall-Mount Enclosures Type 4X Premier™ Series with Quarter-Turn LatchesCatalog Number





B

C

1.16 (29)

A

J

A

A-2J(when latch

qty.=2)

A-2J/2(when latch

qty.=3)

B-1.75 (44)

.700(18)

A-1.75 (44)

X

XSolid door

Front View

Side View

H

W

E

D

G

A

B

J

A-1.75 (44)

B-1.75 (44)

FA-2J

(when latch qty.=2)

.812 (21).750

(19)

Section X-X

Window door

Front View


Wall-Mount Enclosures Type 4X Premier™ Series, Stainless Steel With Quarter-Turn Latches Illustration SheetSee pages 69 & 70 for dimensions.

Type

4X

Pane

l Enc

losu

res





PanelsPremier panels can be installed in any Premier Series enclosure and are up to 20% larger than standard NEMA panels. Panels above 24” are flanged. Steel panels have a white polyester powder paint finish. Stainless steel sizes are available as shown in chart.

W

H

NEMA Panel AdaptersNEMA panel adapters allow standard NEMA panels to be used in Premier Series enclosures. Decreased height and width of NEMA panels increase space around panel for wire management. Kit includes four adapters and four .375-16 flanged hex nuts. Finish: Zinc Plated

Mounting Foot KitsMounting foot kits are available in stainless steel. Four feet and hardware are included.

Enclosure

Catalog #

Panel Size

Height x Width Gauge

Steel Stainless in. mm.

CH108P CH108PSS4 8.00 x 6.00 203 x 152 14

CH1210P CH1210PSS4 10.00 x 8.00 254 x 203 14

CH1212P CH1212PSS4 10.00 x 10.00 254 x 254 14

CH1612P CH1612PSS4 14.00 x 10.00 356 x 254 14

CH1616P CH1616PSS4 14.00 x 14.00 356 x 356 12

CH2016P CH2016PSS4 18.00 x 14.00 457 x 356 12

CH2020P CH2020PSS4 18.00 x 18.00 457 x 457 12

CH2416P CH2416PSS4 22.00 x 14.00 559 x 356 12

CH2420P CH2420PSS4 22.00 x 18.00 559 x 457 12

CH2424P CH2424PSS4 22.00 x 22.00 559 x 559 12

CH2442P CH2442PSS4 22.00 x 40.00 559 x 1016 12

CH3020P CH3020PSS4 28.00 x 18.00 711 x 457 12

CH3024P CH3024PSS4 28.00 x 22.00 711 x 559 12

CH3030P CH3030PSS4 28.00 x 28.00 711 x 711 12

CH3048P CH3048PSS4 28.00 x 46.00 711 x 1168 12

CH3060P CH3060PSS4 28.00 x 58.00 711 x 1473 12

CH3624P CH3624PSS4 34.00 x 22.00 864 x 559 12

CH3630P CH3630PSS4 34.00 x 28.00 864 x 711 12

CH3636P CH3636PSS4 34.00 x 34.00 864 x 864 12

CH4230P CH4230PSS4 40.00 x 28.00 1016 x 711 12

CH4236P CH4236PSS4 40.00 x 34.00 1016 x 864 12

CH4824P CH4824PSS4 46.00 x 22.00 1168 x 559 12

CH4836P CH4836PSS4 46.00 x 34.00 1168 x 864 12

CH6036P CH6036PSS4 58.00 x 34.00 1473 x 864 12


CHPCK4 4 30” x 30” or smaller


CHWMKSS6 4 Type 316 Stainless Steel

Note: Cannot be used with enclosures 12” x 12” (305mm x 305mm) or smaller.






Dead Front PanelsDead front kits offer a means for mounting user components and equipment near the front of an enclosure opening. Also, creates a barrier and controls access to the enclosure interior. Kit includes ANSI 61 gray panel and all hardware for mounting to enclosures.

Mounting ChannelsMounting channels create a vertical or horizontal framework for DIN rail, flexible mounting straps or other component attachment. Two channels provided for mounting on enclosure collar studs. Finish: Zinc Plated

Swing-Out PanelsSwing-out panels offer a means for mounting user components and equipment near the front of an enclosure opening. Panel pivots from front of enclosure to allow easy access to internal equipment. Swing-out panels are 14 gauge with a white polyester powder finish and includes all hardware for mounting to front flange of enclosure.

Note: Dead front panel distance from panel face to inside of enclosure cover equals 1¼”.

Catalog #

Panel Size

Height x Width

For use with Premier

Enclosures

in. mm. A x B

CH1212SP 9.78 x 9.84 248 x 250 12” x 12”

CH1612SP 13.78 x 9.84 350 x 250 16” x 12”

CH1616SP 13.78 x 13.84 350 x 352 16” x 16”

CH1620SP 13.78 x 17.84 350 x 453 16” x 20”

CH2016SP 17.78 x 13.84 452 x 352 20” x 16”

CH2020SP 17.78 x 17.84 452 x 453 20” x 20”

CH2024SP 17.78 x 21.84 452 x 555 20” x 24”

CH2416SP 21.78 x 13.84 553 x 352 24” x 16”

CH2420SP 21.78 x 17.84 553 x 453 24” x 20”

CH2424SP 21.78 x 21.84 553 x 555 24” x 24”

CH3020SP 27.78 x 17.84 706 x 453 30” x 20”

CH3024SP 27.78 x 21.84 706 x 555 30” x 24”

CH3030SP 27.78 x 27.84 706 x 707 30” x 30”

CH3624SP 33.78 x 21.84 858 x 555 36” x 24”

CH3630SP 33.78 x 27.84 858 x 707 36” x 30”

CH3636SP 33.78 x 33.84 858 x 860 36” x 36”

Catalog #For use with Premier

Enclosures

A x B

CH1212DF 12” x 12”

CH1612DF 16” x 12”

CH2016DF 20” x 16”

CH2020DF 20” x 20”

CH2420DF 24” x 20”

CH2424DF 24” x 24”

CH3024DF 30” x 24”

Catalog # Qty.For use with Premier

Enclosures












Note: Swing-out panel distance from panel face to inside of enclosure cover equals 1¼”.

Type

4X

Pane

l Enc

losu

res




DIN Rail KitsDIN rail kits provide flexibility for mounting DIN type snap-on equipment. Three styles: TS32x15, slotted; TS35x7.5, slotted; TS35x15, slotted all attach to collar studs either horizontally or vertically. Three DIN rails, screws and channel nuts are provided. Finish: Yellow Zinc

Flexible Mounting StrapsFlexible mounting straps offer a versatile, horizontal or vertical mounting method inside enclosure body. Two designs: 1-hole or 3-hole pattern increase mounting flexibility and attach to enclosure collar studs. Flexible mounting strap kit contains two straps and hardware. Finish: Zinc Plated



Premier Enclosures














Premier Enclosures














Swing-out Rack FramesSwing-out rack frames allow mounting of EIA 19” rack mount equipment. Flexible pivoting framework provides access to back of equipment or other internal components. Designed for use with 24” wide Premier Series enclosures. Mounting hardware included. Swing-out rack frame holes are untapped and require screws and cage nuts for equipment mounting (order separately).Finish: ANSI Gray Polyester Powder

Universal Spacing [(5/8” (16mm), 5/8” (16mm), 1/2” (13mm)]

Rack Mounting AnglesRelay rack angles are designed for mounting EIA 19” rack mount equipment inside 24” wide enclosures. Fabricated from (14) gauge steel and zinc plated. Rack angles are mounted to enclosure flange with hardware provided. Rack mount angles are untapped and require screws and cage nuts for equipment mounting (order separately).Finish: Zinc Plated

Universal Spacing [5/8” (16mm), 5/8” (16mm), 1/2” (13mm)]



Premier Enclosures

Mounting

Units







Premier Enclosures

Mounting

Units

CH2424SF 24” x 24” 11

CH3024SF 30” x 24” 15

CH3624SF 36” x 24” 18


Type

4X

Pane

l Enc

losu

res




Print PocketsPrint pockets provide a convenient place to store operation manuals, diagrams or other documents inside the enclosure. Thermoplastic pockets are gray and have cutaway areas for viewing contents. Pockets have adhesive backing for mounting inside on enclosure door.

HandlesPadlocking, key locking or non-locking handles are interchangeable with standard slotted quarter-turn flush latch on Premier Series enclosures. Available keyed alike or keyed different; please specify when ordering.

Security Latch InsertsSecurity latch inserts interchange with slotted quarter-turn flush latches and provide security and control access to interior of enclosure. Inserts include matching key.

CH3MDBLK

CH7MTLK

CH7MSLK













Catalog # Length x Width

CH32170 6” x 6”

CH32171 10” x 10”





Pole Mounting KitsPole mounting kits allow installation of enclosure on round or rectangular poles. Kit includes hot dip galvanized after fabrication strut channel, stainless steel band and hardware for top and bottom mounting of enclosure.

Depth Adjustment BracketsDepth adjustment brackets allow variable depth mounting of Premier Series accessories. Designed for use with 6”, 8” or 12” deep enclosures. Kit is available in quantities of 4 or 2 and includes mounting channel, adjustable mechanism and hardware. When enclosure has 6 collar studs, use two kits. Finish: Zinc Plated

Note: Pole diameter range 4” minimum to 12” maximum.


Catalog # Qty.For use with

Premier Enclosures







Premier Enclosures

CH12PMK 12” width

CH16PMK 16” width

CH20PMK 20” width

CH24PMK 24” width

CH30PMK 30” width






CHE2-MA-CN-1032-100 #10-32 Tapped

CHE2-MA-CN-1224-100 #12-24 Tapped


Note: Not for use with swing-out rack frame, dead front panel or swing-out panel.

Sold in bags of 100 pieces.

HardwarePhillips head screws and cage nuts are available in #10-32, #12-24 or M6 and allow mounting of equipment to untapped holes in rack mounting angles and swing-out rack frame.

Type

4X

Pane

l Enc

losu

res






• NEMA terminal kits

• Window kits

• Floor stand kit


Construction• Enclosure and door are fabricated from (14) gauge stainless steel



• Internal 3-point latching with a stainless padlocking handle










Standards• UL 508 Listed, Type 3R, Type 4, Type 4X and Type 12



• Meets NEMA Type 3R requirements

Enclosure

Catalog #

Enclosure Size


AxBxC


Height x Width

Type 304 Type 316L in. mm. Catalog # Catalog # in. mm.

CH24206-4XS3PT CH24206-4XSS63PT 24.00 x 20.00 x 6.00 609 x 508 x 152 CHAW2420P CHAW2420GP 20.87 x 16.87 530 x 428












Wall-Mount EnclosuresType 4X Single-Door with 3-Point Locking Data Sheet and Catalog Number




Enclosure

Catalog #

Enclosure Size


AxBxC


Height x Width

Type 304 Type 316L in. mm. Catalog # Catalog # in. mm.











3-point handle

3-point handle

mounting feetprint pocket (supplied)

Section X-X

X

X


.375-16 collar stud(omit center studs where“B” is less than 36)

B C

B (**B)

B-4.75 (121)

C

A

A-4.75 (121)

A+1.25 (32)

A-2.75 (70)

B-2.75 (70)

CL

CL

CL

CL

optional panel


Note: Dimensions: **B = (-2.50) if 12 inches wide; (-6.00) if wider than 12 inches.


Wall-Mount EnclosuresType 4X Single-Door with 3-Point Locking Illustration Sheet and Catalog Number

Type

4X

Pane

l Enc

losu

res






• Window kits

• Floor stand kit

• Lights


Construction• Enclosure and cover are fabricated from (14) gauge stainless steel



• Internal 3-point latching with stainless padlocking handles















Enclosure

Enclosure Size


AxBxC


Height x Width


CH24428-4XSD3PT 24.00 x 42.00 x 8.00 609 x 1067 x 203 CHAW4224P -- 38.87 x 20.87 987 x 530


CH304210-4XSD3PT 30.00 x 42.00 x 10.00 762 x 1067 x 254 CHAW4230P CHAW4230GP 38.87 x 26.87 987 x 682










Wall-Mount EnclosuresType 4X Double-Door with 3-Point Locking Data Sheet and Catalog Number





rotation

Section X-X

B

A A-2.75 (70)A+1.25

(32)

B-6.00 (152)

A-4.75 (121)

B-4.75 (121)

B-2.75 (70)

CL

CL

mounting feet

body stiffener(omit where “A” is less than 30)

.375-16 collar stud(omit center studs where“A” is less than 36)

C

optional back panel

X

X

print pocket

(supplied)


3-point handle

Front View

Side View

Wall-Mount EnclosuresType 4X Double-Door with 3-Point Locking Illustration Sheet

Type

4X

Pane

l Enc

losu

res




Finish• Doors and sides of body have a smooth #4 brushed finish




Construction• Enclosure and door are fabricated from (12) gauge, Type 304



• Each door is secured to the body with a heavy duty stainless steel continuous hinge and pin on one side and easy-to-release stainless steel door clamps mounted to the other three sides













• CSA C22.2 No. 94 Certified, Type 4, Type 4X and Type 12


Enclosure Catalog #

Stainless Steel

Enclosure Size


AxBxC

PanelPanel Size

Height x Width

Type 304 Type 316L in. mm. Catalog # in. mm.

CH624810-4XSFD CH624810-4XSS6FD 62.00 x 48.00 x 10.00 1575 x 1219 x 254 CHAW6048P 55.87 x 43.87 1419 x 1114






Ground-Mount EnclosuresType 4X Double-Door Floor-StandingData Sheet and Catalog Number




padlock hasp


lifting eye

panel support

A-4.75 (121)

12.00 (305)

A

mounting leg(see note on this page)

X

B

B-2.75 (70)

2.87(73)

C

X

Section X-X

(enlarged)



optional panel

collar stud

C+.25 (6)

C-1.38 (35)

Notes: Clamps are mounted along three sides of the enclosure door. Spacing between clamps along side opposite the hinge does not exceed 15 inches. Four lifting eyes are furnished when C dimension is 24”. Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Front View

Side View

Ground-Mount EnclosuresType 4X Double-Door Floor-StandingIllustration Sheet

Type

4X

Pane

l Enc

losu

res








Construction• Enclosure and door are fabricated from (.125) thick, Type 5052-

H32 aluminum


• Each door is secured to the body with a heavy duty aluminum continuous hinge and pin on one side and easy-to-release stainless steel door clamps mounted to the other three sides











Standards• UL 508 Listed, Type 4, Type 4X, and Type 12



Enclosure

Enclosure Size


AxBxC

PanelPanel Size

Height x Width


CH624810-4XAFD 62.00 x 48.00 x 10.00 1575 x 1219 x 254 CHAW6048P 55.87 x 43.87 1419 x 1114






Ground-Mount EnclosuresType 4X Double-Door Floor-Standing, AluminumData Sheet and Catalog Number




padlock hasp


lifting eye

panel support

A-4.75 (121)

12.00 (305)

A

mounting leg(see note on this page)

X

B

B-2.75 (70)

2.87(73)

C

X

Section X-X

(enlarged)



optional panel

collar stud

C+.25 (6)

C-1.38 (35)

Notes: Clamps are mounted along three sides of the enclosure door. Spacing between clamps along side opposite the hinge does not exceed 15 inches. Four lifting eyes are furnished when C dimension is 24”. Mounting legs shipped unassembled on aluminum enclosures. Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Front View

Side View

Ground-Mount EnclosuresType 4X Double-Door Floor-Standing, AluminumIllustration Sheet

Type

4X

Pane

l Enc

losu

res









• Lights

• Window kits



• Stainless steel continuous hinges and pins


• Doors have a seamless poured-in place gasket







• Mounting legs






• Conforms to NEMA Standard for Type 3, Type 3R, Type 4, Type 4X and Type 12


Enclosure

Enclosure Size


AxBxC

PanelPanel Size

Height x Width


CH604812-4XSFDQT 60.00 x 48.00 x 12.00 1524 x 1219 x 305 CHAW6048P 55.87 x 43.87 1419 x 1114









Ground-Mount EnclosuresType 4X Double-Door Floor-Standing with Quarter-Turn LatchesData Sheet and Catalog Number




Notes: Four lifting eyes are furnished when C dimension is 24”. Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

panel support


mounting leg

optional back panel

lifting eye


collar stud


X

B

A A-4.75 (121)

12.00(305)

C+.25 (6)

C-1.38 (35)

C

B-2.75 (70)

2.87(73)

X


Front View

Side View

Ground-Mount EnclosuresType 4X Double-Door Floor-Standing with Quarter-Turn LatchesIllustration Sheet

Type

4X

Pane

l Enc

losu

res








• Lights

• Window kits


Construction• Enclosure and doors are fabricated from (12) gauge stainless steel


• Stainless steel continuous hinges and pins









• Mounting legs




Standards• UL 508 listed, Type 3R, Type 4, Type 4X and Type 12





Ground-Mount EnclosuresType 4X Double-Door Floor-Standing with 3-Point LockingData Sheet and Catalog Number

Enclosure

Catalog #

Enclosure Size


AxBxC

PanelPanel Size

Height x Width

Type 304 Type 316L in. mm. Catalog # in. mm.

CH624812-4XSFD3PT CH624812-4XSS6FD3PT 62.00 x 48.00 x 12.00 1575 x 1219 x 305 CHAW6048P 55.87 x 43.87 1419 x 1114










3-point handle

3-point handle

rotation

panel support


mounting leg

optional back panel

lifting eye


collar stud


X

B

A

A-4.75 (121)

12.00(305)

C+.25 (6)

C-1.38 (35)

C

B-2.75 (70)

2.87(73)

X

Front View

Side View

Ground-Mount EnclosuresType 4X Double-Door Floor-Standing with 3-Point LockingIllustration Sheet

Type

4X

Pane

l Enc

losu

res



Construction• Enclosure and door are fabricated from (12) gauge, Type

304 or Type 316L stainless steel


• Doors are secured to the body with a heavy duty, stainless steel continuous hinge on one side and easy-to-release stainless steel door clamps mounted to the other three sides









• Easy access fixed or swing panels for mounting optional equipment






• E.I.A. RS-310-D

Finish• Door and sides of body have a smooth #4 brushed

finish





• Touch-up paint


Ground-Mount EnclosuresType 4X Single-Door Free-StandingData Sheet




lifting eye

padlock hasp



B C

B-2.62 (67)

B-3.75 (95)

7.37(187)

3.50(89)

A-10.75 (273)

A

8.87(225)

D

D

CL

CL

Notes: Clamps are mounted along three sides of the enclosure door. Spacing between clamps along side opposite the hinge does not exceed 15 inches. Four lifting eyes are furnished when C dimension is 24”. Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Front View

Side View

Enclosure

Catalog #

Enclosure Size


AxBxC

D

Type 304 Type 316L in. mm. in. mm.

CH722518-4XSFS CH722518-4XSS6FS 72.00 x 25.00 x 18.00 1829 x 635 x 457 29.12 740






Ground-Mount EnclosuresType 4X Single-Door Free-StandingCatalog Number and Illustration Sheet

Type

4X

Pane

l Enc

losu

res











• Lights

• Window kits



• Heavy duty stainless steel continuous hinges and pins

















• E.I.A. RS-310-D

Enclosure

Catalog #

Enclosure Size


AxBxC

D

Type 304 in. mm. in. mm.

CH722418-4XSFSQT 72.00 x 24.00 x 18.00 1829 x 609 x 457 29.12 740

CH723024-4XSFSQT 72.00 x 30.00 x 24.00 1829 x 762 x 609 29.12 740

CH723624-4XSFSQT 72.00 x 36.00 x 24.00 1829 x 914 x 609 29.12 740

Ground-Mount EnclosuresType 4X Single-Door Free-Standing with Quarter-Turn LatchesData Sheet and Catalog Number





lifting eye

mounting channel

C

8.87(225)

D

D


B

B-2.62 (67)

B-3.75 (95)

7.37(187)

3.50(89)

A-10.75 (273)

A


CL

CL

Front View

Side View

Ground-Mount EnclosuresType 4X Single-Door Free-Standing with Quarter-Turn LatchesIllustration Sheet

Type

4X

Pane

l Enc

losu

res











• Lights

• Window kits





















• E.I.A. RS-310-D

Ground-Mount EnclosuresType 4X Single-Door Free-Standing with 3-Point LockingData Sheet





3-point handle

rotation

lifting eye


B C

B-2.62 (67)

B-3.75 (95)

7.37(187)

3.50(89)

A-10.75 (273)

A

8.87(225)

D

D

CL

CL


Ground-Mount EnclosuresType 4X Single-Door Free-Standing with 3-Point LockingIllustration Sheet and Catalog Number

Enclosure

Catalog #

Enclosure Size


AxBxC

D

Type 304 in. mm. in. mm.

CH602418-4XSFS3PT 60.00 x 24.00 x 18.00 1524 x 609 x 457 23.12 587

CH722418-4XSFS3PT 72.00 x 24.00 x 18.00 1829 x 609 x 457 29.12 739

CH723018-4XSFS3PT 72.00 x 30.00 x 18.00 1829 x 762 x 457 29.12 739

CH723618-4XSFS3PT 72.00 x 36.00 x 18.00 1829 x 914 x 457 29.12 739

CH902420-4XSFS3PT 90.00 x 24.00 x 20.00 2286 x 609 x 508 38.12 968

CH903620-4XSFS3PT 90.00 x 36.00 x 20.00 2286 x 914 x 508 38.12 968

CH603624-4XSFS3PT 60.00 x 36.00 x 24.00 1524 x 914 x 609 23.12 587

CH722424-4XSFS3PT 72.00 x 24.00 x 24.00 1829 x 609 x 609 29.12 739

CH723024-4XSFS3PT 72.00 x 30.00 x 24.00 1829 x 762 x 609 29.12 739

CH723624-4XSFS3PT 72.00 x 36.00 x 24.00 1829 x 914 x 609 29.12 739

CH903624-4XSFS3PT 90.00 x 36.00 x 24.00 2286 x 914 x 609 38.12 968

CH723630-4XSFS3PT 72.00 x 36.00 x 30.00 1829 x 914 x 762 29.12 739

CH723636-4XSFS3PT 72.00 x 36.00 x 36.00 1829 x 914 x 914 29.12 739

CH903636-4XSFS3PT 90.00 x 36.00 x 36.00 2286 x 914 x 914 38.12 968

Type

4X

Pane

l Enc

losu

res









• Lights

• Window kits


Construction• Enclosure and doors are fabricated from (12) gauge stainless

steel





• Formed lip around enclosure openings to diverts liquids and contaminants

• Dual-access construction available for back-to-back panel and equipment mounting

• Ground studs provided on doors

• Print pockets provided


• Provisions for mounting fluorescent light









• E.I.A. RS-310-D



Ground-Mount EnclosuresType 4X Single-Door Dual Access Free-Standing with 3-Point LockingData Sheet





lifting eye

A

B C


mounting channel

3-point handle

rotation

D

D

8.87(225)

A-10.75 (273)

7.37(187)

B-2.75 (70)

B-1.62 (41)

Front View

Side View

Ground-Mount EnclosuresType 4X Single-Door Dual-Access Free-Standing with 3-Point LockingIllustration Sheet and Catalog Number

Enclosure

Enclosure Size


AxBxC

D


CH722424-4XSFSDA3PT 72.00 x 24.00 x 24.00 1829 x 609 x 609 29.12 739

CH723024-4XSFSDA3PT 72.00 x 30.00 x 24.00 1829 x 762 x 609 29.12 739

CH723624-4XSFSDA3PT 72.00 x 36.00 x 24.00 1829 x 914 x 609 29.12 739

CH903624-4XSFSDA3PT 90.00 x 36.00 x 24.00 2286 x 914 x 609 38.12 968

CH722430-4XSFSDA3PT 72.00 x 24.00 x 30.00 1829 x 609 x 762 29.12 739

CH722436-4XSFSDA3PT 72.00 x 24.00 x 36.00 1829 x 609 x 914 29.12 739

CH723636-4XSFSDA3PT 72.00 x 36.00 x 36.00 1829 x 914 x 914 29.12 739

CH903636-4XSFSDA3PT 90.00 x 36.00 x 36.00 2286 x 914 x 914 38.12 968

Type

4X

Pane

l Enc

losu

res










• Lights

• Window kits


Construction• Enclosure and doors are fabricated from (12) gauge stainless

steel


















• Conforms to NEMA Standard for Type 3, Type 3R, Type 4 and Type 4X, Type 12


• E.I.A. RS-310-D

Ground-Mount EnclosuresType 4X Double-Door Free-Standing with 3-Point LockingData Sheet





mounting channel

body stiffener(see note)

3-point handle

print pocket (supplied)

lifting eye

rotation

B C

D

D

8.87(225)

A-10.75 (273)

A-1.62 (41)

A

7.37(187)

CL

B-2.75 (70)

B-1.62 (41)

Front View

Side View

Ground-Mount EnclosuresType 4X Double-Door Free-Standing with 3-Point LockingIllustration Sheet and Catalog Number

Enclosure

Enclosure Size


AxBxC

D


CH604818-4XSFSD3PT 60.00 x 48.00 x 18.00 1524 x 1219 x 457 23.12 587

CH724818-4XSFSD3PT 72.00 x 48.00 x 18.00 1829 x 1219 x 457 29.12 739

CH726018-4XSFSD3PT 72.00 x 60.00 x 18.00 1829 x 1524 x 457 29.12 739

CH727218-4XSFSD3PT 72.00 x 72.00 x 18.00 1829 x 1829 x 457 29.12 739

CH904820-4XSFSD3PT 90.00 x 48.00 x 20.00 2286 x 1219 x 508 38.12 968

CH907220-4XSFSD3PT 90.00 x 72.00 x 20.00 2286 x 1829 x 508 38.12 968

CH724824-4XSFSD3PT 72.00 x 48.00 x 24.00 1829 x 1219 x 609 29.12 739

CH726024-4XSFSD3PT 72.00 x 60.00 x 24.00 1829 x 1524 x 609 29.12 739

CH727224-4XSFSD3PT 72.00 x 72.00 x 24.00 1829 x 1829 x 609 29.12 739

CH907224-4XSFSD3PT 90.00 x 72.00 x 24.00 2286 x 1829 x 609 38.12 968

CH726036-4XSFSD3PT 72.00 x 60.00 x 36.00 1829 x 1524 x 914 29.12 739

CH907236-4XSFSD3PT 90.00 x 72.00 x 36.00 2286 x 1829 x 914 38.12 968

Type

4X

Pane

l Enc

losu

res










• Lights

• Window kits


Construction• Enclosure and doors are fabricated from (12) gauge

stainless steel



• Internal 3-point latching with stainless padlock handles





• Dual-access construction available for back-to-back panel and equipment mounting











• Conforms to NEMA Standard for Type 3R, Type 4, Type 4X and Type 12


• E.I.A. RS-310-D

Ground-Mount EnclosuresType 4X Double-Door Dual Access Free-Standing with 3-Point LockingData Sheet





mounting channel

3-point handle

print pocket (supplied)

lifting eye

rotation

B C

D

D

8.87(225)

A-10.75 (273)

A-1.62 (41)

A

7.37(187)

B-2.75 (70)

B-1.62 (41)

CL

Front View

Side View

Ground-Mount EnclosuresType 4X Double-Door Dual-Access Free-Standing with 3-Point LockingIllustration Sheet and Catalog Number

Enclosure

Enclosure Size


AxBxC

D


CH724824-4XSFSDDA3PT 72.00 x 48.00 x 24.00 1829 x 1219 x 609 29.12 739





Type

4X

Pane

l Enc

losu

res




• Side panels

• Swing panels

• Touch-up paint

• Mounting legs

• Rack mounting angles

• Swing out mounting frames





• Doors are secured to the body with a heavy duty concealed lift-off hinge and a 3-point vault handle locking mechanism on each door

• Removable center post

• Doors have a fixed, oil-resistant gasket

• Ground stud provided on doors and bodies


• Large lifting eyes are integrated with sides of enclosure

• Mounting channels are welded inside for locating panels or rack mounts along enclosure depth, as well as mounting studs for fixed panels

• Swing panels, single full and single half panels can be installed in double-door enclosures when the center post is used


Application• Houses electrical controls and electrical instruments in

harsh environments

• Provides quick and easy access indoors and out

• Protects against circulating dust, falling dirt, dripping non-corrosive liquids, rain, sleet, ice, splashing and hose directed water



• Conforms to NEMA Standard for Type 3R, Type 4, Type 4X and Type 12


• E.I.A. RS-310-D

• NSF Criteria C-2


Ground-Mount Enclosures Type 4X Double-Door EnviroShield™ Free-Standing with 3-Point Locking Data Sheet





bodystiffeners

adjustable back & side panel

mountingprovisions

padlockable3-point locking

mechanism

lighting bracket

concealed lift-off hinges

integrated lifting eyes


adjustable top & bottom mounting

provisions

grounding & bonding provisions on door &

body

sloped trough collarC

C+2.09 (53)

B-3.94 (100)

Min=A-2.60 (66)Max=A-3.20 (81)

B/2-1.97 (50)

5.43(138)

4.09(104)

2.65(67)

2.00(51)

A

B

D

E

Front View

Side View

Ground-Mount Enclosures Type 4X Double-Door EnviroShield™ Free-Standing with 3-Point Locking Data Sheet

Enclosure

Enclosure Size


AxBxC

D E

Type 304 Type 316L in. mm. in. mm. in. mm.

CHES-604812-4XS CHES-604812-4XSS6 60.00 x 48.00 x 12.00 1524 x 1219 x 305 65.98 1676 64.23 1631
















Type

4X

Pane

l Enc

losu

res




Note: Full and half panel for single-door, single and dual-access enclosures are (12) gauge steel and furnished with panel side brackets and all hardware necessary for channel and panel mounting. Half panels can be mounted in either the upper or lower portion of the enclosure. Free-standing design permits the panel to adjust along the depth of the enclosure. With dual-access enclosures, full and half panels can be mounted back-to-back.

Full Panel Mounting

Half Panel Mounting

Full Panel

Half Panel

(lower mount)

Half Panel

(upper mount)

B

B

B-1.62 (41)

B-1.62 (41)

A-1.62 (41)

A

A

A

C

C

C

Cpanel

side bracketincluded

(see illustra-tion #1 page

110 and detail sheet page

111)

Free-Standing Enclosure AccessoriesType 4X Single-DoorFull and Half PanelIllustration Sheet and Catalog Number

PanelPanel Size

Height x Width

AxB

CFits Enclosure

Height x Width


CHAF6024P 47.87 x 19.87 1216 x 505 23.12 587 60.00 x 24.00 1524 x 610

CHAF6036P 47.87 x 31.87 1216 x 809 23.12 587 60.00 x 36.00 1524 x 914

CHAF7224P 59.87 x 19.87 1521 x 505 29.12 740 72.00 x 24.00 1829 x 610

CHAF7230P 59.87 x 25.87 1521 x 657 29.12 740 72.00 x 30.00 1829 x 762

CHAF7236P 59.87 x 31.87 1521 x 809 29.12 740 72.00 x 36.00 1829 x 914

CHAF9024P 77.87 x 19.87 1978 x 505 38.12 968 90.00 x 24.00 2286 x 610

CHAF9036P 77.87 x 31.87 1978 x 809 38.12 968 90.00 x 36.00 2286 x 914

PanelPanel Size

Height x Width

AxB

CFits Enclosure

Height x Width


CHAF6024HP 24.75 x 19.87 629 x 505 23.12 587 60.00 x 24.00 1524 x 610

CHAF6036HP 24.75 x 31.87 629 x 809 23.12 587 60.00 x 36.00 1524 x 914

CHAF7224HP 30.75 x 19.87 781 x 505 29.12 587 72.00 x 24.00 1829 x 610

CHAF7230HP 30.75 x 25.87 781 x 657 29.12 587 72.00 x 30.00 1829 x 762

CHAF7236HP 30.75 x 31.87 781 x 809 29.12 587 72.00 x 36.00 1829 x 914

CHAF9024HP 39.75 x 19.87 1010 x 505 38.12 968 90.00 x 24.00 2286 x 610

CHAF9036HP 39.75 x 31.87 1010 x 809 38.12 968 90.00 x 36.00 2286 x 914

Full Panel (Single-Door) Half Panel (Single-Door)





Notes: Full panel for double-door, single and dual-access enclosures are (10) gauge steel and furnished with panel brackets, center post assembly, panel handle kit and all hardware necessary for channel and panel mounting. The center post assembly offers additional support of panel and equipment. Free-standing design permits the panel to adjust along the depth of the enclosure. With dual-access enclosures, full and half panels can be mounted back-to-back.

Full Panel Mounting

Full Panel

panel side bracket included(see illustration #1 page 110 and detail sheet page 111)

center post included withdouble-door full panel(see illustration #5 page 110)

B

D

C

C

AA-1.62

(41)

D

B-1.62(41)

Free-Standing Enclosure AccessoriesType 4X Double-DoorFull PanelIllustration Sheet and Catalog Number

PanelPanel Size

Height x Width

AxB

C DFits Enclosure

Height x Width


CHAF6048P 47.87 x 43.87 1216 x 1114 23.12 587 21.12 530 60.00 x 48.00 1524 x 1219

CHAF6060P 47.87 x 55.87 1216 x 1419 23.12 587 27.12 689 60.00 x 60.00 1524 x 1524

CHAF7248P 59.87 x 43.87 1521 x 1114 29.12 740 21.12 530 72.00 x 48.00 1829 x 1219

CHAF7260P 59.87 x 55.87 1521 x 1419 29.12 740 27.12 689 72.00 x 60.00 1829 x 1524

CHAF7272P 59.87 x 67.87 1521 x 1724 29.12 740 33.12 841 72.00 x 72.00 1829 x 1829

CHAF9048P 77.87 x 43.87 1978 x 1114 38.12 968 21.12 530 90.00 x 48.00 2286 x 1219

CHAF9072P 77.87 x 67.87 1978 x 1724 38.12 968 33.12 841 90.00 x 72.00 2286 x 1829

Type

4X

Pane

l Enc

losu

res




Note: Half panel for double-door, single and dual-access enclosures are (12) gauge steel and furnished with panel brackets and all hardware necessary for channel and panel mounting. A center post assembly or a double-door panel support bracket (catalog

number CHAFSUP2) for additional support of the panel is optional and sold separately. Free-standing design permits the panel to adjust along the depth of the enclosure. With dual-access enclosures, full and half panels can be mounted back-to-back.

panel side bracket included(see illustration #1 page 110and detail sheet page 111)

center post or double-door panel support bracket(sold separately)(see illustration #5 page 110)

Half Panel

(upper mount)

Half Panel

(lower mount)

Half Panel Mounting

B

D

C

C

A

A

D

B-1.62 (41)

PanelPanel Size

Height x Width

AxB

C DFits Enclosure

Height x Width


CHAF6048HP 24.75 x 43.87 629 x 1114 23.12 587 21.12 536 60.00 x 48.00 1524 x 1219

CHAF7248HP 30.75 x 43.87 781 x 1114 29.12 740 21.12 536 72.00 x 48.00 1829 x 1219

CHAF7260HP 30.75 x 55.87 781 x 1419 29.12 740 7.12 181 72.00 x 60.00 1829 x 1524

CHAF7272HP 30.75 x 67.87 781 x 1724 29.12 740 33.12 841 72.00 x 72.00 1829 x 1829

CHAF9048HP 39.75 x 43.87 1010 x 1114 38.12 968 21.12 536 90.00 x 48.00 2286 x 1219

CHAF9072HP 39.85 x 67.87 1012 x 1724 38.12 968 33.12 841 90.00 x 72.00 2286 x 1829

Free-Standing Enclosure AccessoriesType 4X Double-Door, Half PanelIllustration Sheet and Catalog Number





Side Panel

Side Panel Mounting Center Post Assembly

Side panels are (12) gauge steel and furnished with hardware necessary for channel mounting. They will fit any width enclosure and are adjustable along its depth, however, when full or half panels are installed, movement will be restricted and with some depths make side mounting prohibitive.

* Back panels restrict the movement of side panels and will prohibit mounting in some depths. See detail sheet for back panel spacing.

Center post assembly is furnished with all double-door full panels and includes hardware necessary for channel and panel mounting. The center post is optional on double-door half panels and swing panel mounting and must be ordered separately. It attaches to the top and bottom channels making it adjustable along the depth of the enclosure. See illustration #5 on the Detail Sheet on page 110.

B

C

C B

B

A A-2.12 (54)

A

B-1.62 (41)

PanelPanel Size

Height x Width

AxB

C Fits Enclosure


CHAF6018SP 48.37 x 13.87 1229 x 340 23.12 587 60.00 1524 18.00 457

CHAF7218SP 60.37 x 13.87 1533 x 340 29.12 740 72.00 1829 18.00 457

CHAF7224SP 60.37 x 19.87 1533 x 505 29.12 740 72.00 1829 24.00 610

CHAF9018SP 78.37 x 13.87 1991 x 340 38.12 968 90.00 2286 18.00 457

CHAF9024SP 78.37 x 19.87 1991 x 505 38.12 968 90.00 2286 24.00 457

Center

PostA B

Fits

EnclosureHeight


CHAF60CPS 58.37 1483 23.12 587 60.00 1524

CHAF72CPS 70.37 1787 29.12 740 72.00 1829

CHAF90CPS 88.37 2245 38.12 968 90.00 2286

Free-Standing Enclosure AccessoriesType 4X, Side Panel and Center PostIllustration Sheet and Catalog Number

Type

4X

Pane

l Enc

losu

res



Note: Full swing panel and half swing panel for single-door, single and dual-access enclosures are (12) gauge steel, have a dual hinge swing panel bracket and furnished with panel brackets and all hardware necessary for channel and panel mounting. Panels can be installed so they hinge on either the left or right side. In addition, half panels can be mounted in either the upper or lower portion of the enclosure. Free-standing design permits the panel to be adjustable along the depth of the enclosure. The dual hinge will allow the inner panel to swing completely out of the door opening when within 5.50 inches of the front. With dual-access enclosures, full and half swing panels can be mounted back-to-back.

Full Swing Panel

hinge

3.18(81)

3.18(81)

2.06(52)

2.06(52)

hinge

hinge

swing panelbracket assembly

included (See detail sheet page 112)

Full Swing Panel Mounting Half Swing Panel Mounting

panel side bracket included(see illustration #1 page 110 and detail sheet page 112)

Half Swing Panel

(lower mount)

Half Swing Panel

(upper mount)

B

B

C

C

A

AC

AC

Free-Standing Enclosure AccessoriesType 4X Single-Door, Full and Half Swing PanelIllustration Sheet and Catalog Number

PanelPanel Size

Height x Width

AxB

CFits EnclosureHeight x Width


CHAF6024SWP 47.87 x 18.75 1216 x 476 23.12 587 60.00 x 24.00 1524 x 610

CHAF6036SWP 47.87 x 30.75 1216 x 781 23.12 587 60.00 x 36.00 1524 x 914

CHAF7224SWP 59.87 x 18.75 1521 x 476 29.12 740 72.00 x 24.00 1829 x 610

CHAF7230SWP 59.87 x 24.75 1521 x 629 29.12 740 72.00 x 30.00 1829 x 762

CHAF7236SWP 59.87 x 30.75 1521 x 781 29.12 740 72.00 x 36.00 1829 x 914

CHAF9024SWP 77.87 x 18.75 1978 x 476 38.12 968 90.00 x 24.00 2286 x 610

CHAF9036SWP 77.87 x 30.75 1978 x 781 38.12 968 90.00 x 36.00 2286 x 914

PanelPanel Size

Height x Width

AxB



CHAF6024HSWP 24.75 x 18.75 629 x 476 23.12 587 60.00 x 24.00 1524 x 610

CHAF6036HSWP 24.75 x 30.75 629 x 781 23.12 587 60.00 x 36.00 1524 x 914

CHAF7224HSWP 30.75 x 18.75 781 x 476 29.12 740 72.00 x 24.00 1829 x 610

CHAF7230HSWP 30.75 x 24.75 781 x 629 29.12 740 72.00 x 30.00 1829 x 762

CHAF7236HSWP 30.75 x 30.75 781 x 781 29.12 740 72.00 x 36.00 1829 x 914

CHAF9024HSWP 39.75 x 18.75 1010 x 476 38.12 968 90.00 x 24.00 2286 x 610

CHAF9036HSWP 39.75 x 30.75 1010 x 781 38.12 968 90.00 x 36.00 2286 x 914






Note: Full swing panel and half swing panel for double-door, single and dual-access enclosures are (12) gauge steel, have a dual hinge swing panel bracket, and furnished with hardware necessary for side channel mounting. A center post assembly and center bracket must

be ordered separately. Panels can be installed so they hinge either on the left or right side. In addition, half panels can be mounted in either the upper or lower portion of the enclosure. Free-standing design permits the panel to adjust along the depth of the enclosure. The dual hinge will allow the inner panel to swing completely out of the door opening when within 5.50 inches of the front. With dual-access enclosures, full and half swing panels can be mounted back-to-back.

hinge

hinge

Swing Panel Mounting

swing panelbracket assembly included (see detail sheet page 112)

center post and panel mounting center bracket (sold separately)(see illustration #2 and #5 page 110)

Half Swing Panel

(lower mount)Full Swing Panel

BB

C

C

A

3.18(81)

3.18(81)

A Center post assembly and center bracket must be ordered separately.

panel mountingcenter bracket(sold separately)(see illustration #2 page 110)

Free-Standing Enclosure AccessoriesType 4X Double-Door, Full and Half Swing PanelIllustration Sheet and Catalog Number

Full Swing Panel (Single-Door) Half Swing Panel (Single-Door)

PanelPanel Size

Height x Width

AxB


Catalog # in. mm in. mm in. mm

CHAF6024SWP 47.87 x 18.75 1216 x 476 23.12 587 60.00 x 48.00 1524 x 1219

CHAF7224SWP 59.87 x 18.75 1521 x 476 29.12 740 72.00 x 48.00 1829 x 1219

CHAF7230SWP 59.87 x 24.75 1521 x 629 29.12 740 72.00 x 60.00 1829 x 1524

CHAF7236SWP 59.87 x 30.75 1521 x 781 29.12 740 72.00 x 72.00 1829 x 1829

CHAF9024SWP 77.87 x 18.75 1978 x 781 38.12 968 90.00 x 48.00 2286 x 1219

CHAF9036SWP 77.87 x 30.75 1978 x 781 38.12 968 90.00 x 72.00 2286 x 1829

PanelPanel Size

Height x Width

AxB


Catalog # in. mm in. mm in. mm

CHAF6024HSWP 24.75 x 18.75 629 x 476 23.12 587 60.00 x 48.00 1524 x 1219

CHAF7224HSWP 30.75 x 18.75 781 x 476 29.12 740 72.00 x 48.00 1829 x 1219

CHAF7230HSWP 30.75 x 24.75 781 x 629 29.12 740 72.00 x 60.00 1829 x 1524

CHAF7236HSWP 30.75 x 30.75 781 x 781 29.12 740 72.00 x 72.00 1829 x 1829

CHAF9024HSWP 39.75 x 18.75 1010 x 476 38.12 968 90.00 x 48.00 2286 x 1219

CHAF9036HSWP 39.75 x 30.75 1010 x 781 38.12 968 90.00 x 72.00 2286 x 1829

Type

4X

Pane

l Enc

losu

res




Illustration 1 Illustration 2

Illustration 3

Illustration 4Illustration 5

See catalog page 107

channel spring nut

channel spring nut

channel spring nut

panel nut

panel bolt


panel support bracket

install panel bolt in this hole for top of panel

support

panel bolt

panel nut

panel bolthardware

panel bolt hardware

panel nut

panel mounting studpanel nut

panel nut

panel mounting stud

panel mounting stud




side bracket

center post

center post

center post

post bracket

center bracket





channel spring nut

Miscellaneous Accessories


CHAFSBRKT1 Panel mounting side bracket 1 1

CHAFCBRKT3 Panel mounting center bracket 2 3

CHAFCMH3 Channel mounting hardware 3 3

CHAFPSUP2 Double-door panel support bracket 4 2

See page 107 Center post assembly 5 1

Free-Standing Enclosure AccessoriesType 4XMiscellaneous AccessoriesIllustration Sheet and Catalog Number





Single Door(section view showing full panels mounted back-to-back)

Double Door(section view showing full panels mounted back-to-back)


(of enclosure)

2.87 min (73)

3.00 min (76)

3.75 min (95)

2.87(73)

CL

2.87(73)

2.87 min (73)


Free-Standing Enclosure DetailsType 4XPanel and EnclosureDetail Sheet

Type

4X

Pane

l Enc

losu

res




Single Door(section view showing swing panels mounted back-to-back)

Double Door(section view showing swing panels mounted back-to-back)

5.00 min(127)

3.18(81)

3.18(81)

(of enclosure)

CL

2.87(73)

2.87 min (73)

2.87(73)

2.87 min (73)


5.00 min(127)


Free-Standing Enclosure DetailsType 4XSwing Panel and EnclosureDetail Sheet





to Accept #10-32, #12-24, or M6

Cage Nuts(Sold Separately)

L

Angle Profi le

3.50(89)

1.50(38)

.75(19)

1.44(36)

O.D.

1.50(38)

O.D.

1.625(41)

O.D.

2.29(58)

Equipment Mounting Holesto Accept #10-32, #12-24, or

M6 Cage Nuts(Sold Separately)

Hole Pattern

A = 1.75 (44)B = .625 (16)C = .500 (13)D = .295 (7)E = .250 (6)

A

.375 (9)Square

Hole

BC

D

EB

Hole Pattern

A = 1.75 (44)B = .625 (16)C = .500 (13)D = .295 (7)E = .250 (6)

A

.375 (9)Square

Hole

BC

D

EB

Kit contains two (2) full length ‘U’ angles, installation instructionsand hardware necessary to mount in single-door enclosures.Yellow Zinc fi nish.

L

Heavy duty rack mounting angles are designed for mounting 19” (482mm) equipment in free-standing enclosures. A center post

assembly, “CHAFxxCPS”, on page 107, and a panel mounting center bracket, “CHAFCBRKT3”, on page 110, (each sold

separately) are required when mounting in any double door enclosure. Mounting holes are spaced at the 19” “EIA” standard and are provided to accept #10-32, #12-24, or M6 cage nuts (sold in packages of 100), on page 114.

Note: L-shaped angles are universaland can be rotated to accommodate19” or 23” EIA mounting equipment.


Free-Standing Enclosure Accessories Rack Mounting AnglesIllustration Sheet and Catalog Number

Mounting

Angles


L Mounting

U’s

Catalog # in. mm in. mm

CHES-48RMA-L 48.00 1219 42.00 1067 24

CHES-60RMA-L 60.00 1524 54.25 1378 31

CHES-72RMA-L 72.00 1829 66.50 1689 38

CHES-90RMA-L 90.00 2286 78.75 2000 45

Mounting

Angles


L Mounting

U’s


CHES-48RMA-U 48.00 1219 42.00 1067 24

CHES-60RMA-U 60.00 1524 54.25 1378 31

CHES-72RMA-U 72.00 1829 66.50 1689 38

CHES-90RMA-U 90.00 2286 78.75 2000 45

‘L’ Shaped Mounting Angles

‘U’ Shaped Mounting Angles

Kit contains two (2) full length ‘L’ angles, installation instructionsand hardware necessary to mount in single-door enclosures.Yellow Zinc fi nish.

Angle Profi le

Type

4X

Pane

l Enc

losu

res



Heavy duty swing-out rack mounting frames are designed for mounting 19” (482mm) equipment in free-standing enclosures. A center post assembly, “CHAFxxCPS”,

on page 107 and panel mounting center bracket, “CHAFCBRKT3”, on page 110,

(each sold separately) are required when mounting in any double door enclosure. Mounting holes are spaced per the “EIA” standard and are provided to accept #10-32, #12-24 or M6 cage nuts (sold in packages of 100). Swing-out rack mounting frames have white powder coated fi nish.

Sold in bags of 100.

L

19.47(494)O.D.


to Accept #10-32, #12-24, or M6

Cage Nuts(Sold Separately -

See Below)

Hole Pattern

A = 1.75 (44)B = .625 (16)C = .500 (13)D = .295 (7)E = .250 (6)

A

.375 (9)Square

Hole

BC

D

EB


Mounting

Angles


L


CHES-48SORMF 48.00 1219 36.91 937

CHES-60SORMF 60.00 1524 49.16 1248

CHES-72SORMF 72.00 1829 59.66 1515

CHES-90SORMF 90.00 2286 77.18 1960

Swing-Out Rack Mounted Frame

Free-Standing Enclosure Accessories Frames & FastenersIllustration Sheet and Catalog Number






CHE2-MA-CN-1032-100 #10-32 Tapped

CHE2-MA-CN-1224-100 #12-24 Tapped





Kit allows space between enclosure and floor for compliance in NSF environments 1-3/4” (44mm) adjustment provides flexibility in all applications. Four (4) legs per kit, maintains UL/cUL Type 4X rating when properly installed.

Leg Sleeve

Hex Nut

Flat Washer

Sealing Washer

6.00(152)

.75(19)

.75(19)

1.75(44)

Adjustment


Free-Standing Enclosure Accessories Floor Stand & Enclosure Stabilizer KitsIllustration Sheet and Catalog Number

Floor stand kits are intended for use with EnviroShield™ Type 4X, Type 4 and Type 12 enclosures where fl oor support is required. Each kit consists of two (10) gauge legs and hardware for mounting. At the base of each leg is a pre-punched plate (see drawing). Steel kits have a gray polyester powder paint fi nish. Stainless steel kits are fabricated from 304 stainless steel. Standard fl oor stand kits are 12 inches (305 mm) high. For special heights, special material or non-standard construction, consult factory.

Catalog # A B C

Steel Stainless in. mm. in. mm. in. mm.

CHMFK12 CHMFK12XS 12.00 305 10.06 256 - -

CHMFK16 CHMFK16XS 16.00 406 14.06 357 - -

CHMFK20 CHMFK20XS 20.00 508 18.06 459 8.00 203

CHMFK24 CHMFK24XS 24.00 610 22.06 560 10.00 254


CHES-SMFK6 Set of four (4) legs

CL

Sanitary Leg Kit

Type

4X

Pane

l Enc

losu

res



Accessories


Accessories

Panels JIC Panels, NEMA Panels, JIC Perforated Panels, Medium Perforated Panels, Flanged Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118-122Panel Accessories - JIC & NEMA Swing Panel Kits, Panel Supports, Lifting Hooks . . . . . . . . . . . . . 123-125Window Kits - Fixed & Hinged . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126-127Door Accessories - Door Stops & Print Pockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127Locks, Latches, Inserts, Handles, Clamps Locks, Latches, Inserts, & Handles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128-134 Clamp Kits, Padlock Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135-137Bolt-On Accessories Folding Shelf Kit & Gland Plates, Floor Stand Kit & Stabilizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138-139 Louver Plate Kits, Filters, & Filter Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140-141 Baffle Plates & Hole Seals, Drip Shields & Casters, Barriers, Component Mounting Device 142-144Electrical Accessories JIC & NEMA Terminal Strap & Block Strip Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145-147 Terminal Blocks - Channel Mounted & Flat Base, Terminal Strap Support . . . . . . . . . . . . . . . . . . . . . . . 148-150 Enclosure Lights, Interlocks & Power Strips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151-152 Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153Hardware Hardware Packages, Ground Lug & Devices, Sealing Devices, Clamping Nuts, Touch-up Paint . . . . 154-155

Acce

ssorie

s

Acc

esso

ries

Accessories


JIC panels can be installed in all types of JIC enclosures. Some sizes will fit the NEMA 12 lay-in wireway junction box. Panels are available in steel, galvanized steel, stainless and aluminum. Painted steel panels have a white powder finish. Stainless steel and aluminum panels have a smooth brushed finish on one side and are protected with PVC film.

B

.31(8)

.31(8)

.25 D hole (6)


encl

osur

e he

ight

-1.

75

(44)

A JIC Panels


JIC Flat Panel Catalog # A BGauge

Fits Enclosure

Height x Width

Painted Steel Galvanized Steel Stainless Aluminum in. mm. in. mm. in. mm.

CHAW64P CHAW64GP CHAW64SP CHAW64AP 4.87 124 2.87 73 14 6.00 x 4.00 152 x 102






CHAW126P - - - 10.87 276 4.87 124 14 12.00 x 6.00 305 x 152



CHAW148P - - - 12.87 327 6.87 174 14 14.00 x 8.00 356 x 203


CHAW1610P - - - 14.87 378 8.87 225 14 16.00 x 10.00 406 x 254


Panels & Panel AccessoriesJIC PanelsIllustration Sheet and Catalog Number

Accessories

Accessories


B

A

.56 D hole(14)

* Panel also fi ts these enclosures when height and width dimensions are reversed.

NEMA fl at panels can be installed in Type 4X, Type 4 and Type 12 NEMA enclosures. Panels are available in steel, galvanized steel, stainless steel, and aluminum. Painted steel panels have a white powder paint fi nish. Stainless steel and aluminum panels have a smooth brushed fi nish on one side and are protected with PVC fi lm.

NEMA Flat Panels.88(22)

.88(22)

D

C


NEMA Flat Panel Catalog # A B C DGauge

Fits Enclosure

Height x Width

Painted Steel Galvanized Steel Stainless Aluminum in. mm. in. mm. in. mm. in. mm. in. mm.

CHAW1612P CHAW1612GP CHAW1612SP CHAW1612AP 13.00 330 9.00 229 11.25 286 7.25 184 12 16.00 x 12.00 406 x 305


CHAW2012P - - - 17.00 432 9.00 229 15.25 387 7.25 184 12 20.00 x 12.00 508 x 305

CHAW2016P CHAW2016GP CHAW2016SP CHAW2016AP 17.00 432 13.00 330 15.25 387 11.25 286 12 20.00* x 16.00* 508 x 406


CHAW2412P - CHAW2412SP - 21.00 533 9.00 229 19.25 489 7.25 184 12 24.00* x 12.00* 610 x 305


Panels & Panel AccessoriesNEMA Flat PanelsIllustration Sheet and Catalog Number

Acc

esso

ries

Accessories


JIC perforated panels can be installed in all types of JIC enclosures, and are intended for mounting lightweight components without drilling and tapping.

Panels are available in steel and have a white powder paint fi nish.

60°

.25(6)

.125(3)

A

B


enc

losu

re w

idth

-1.

75

(44)

.31(8)

.31(8)

.25 Dia.(6)

JIC Enclosure Perforated Panels


.25(6)

JIC Flat Perforated Panel Fits Enclosure

Height x WidthA BGauge


CHAW64PP 4.87 124 2.87 73 16 6.00 x 4.00 152 x 102

CHAW66PP 4.87 124 4.87 124 16 6.00 x 6.00 152 x 152

CHAW86PP 6.87 174 4.87 124 16 8.00 x 6.00 203 x 152

CHAW88PP 6.87 174 6.87 174 16 8.00 x 8.00 203 x 203

CHAW108PP 8.87 225 6.87 174 16 10.00 x 8.00 254 x 203

CHAW1010PP 8.87 225 8.87 225 16 10.00 x 10.00 254 x 254

CHAW126PP 10.87 276 4.87 124 16 12.00 x 6.00 305 x 152

CHAW1210PP 10.87 276 8.87 225 16 12.00 x 10.00 305 x 254

CHAW1212PP 10.87 276 10.87 276 16 12.00 x 12.00 305 x 305

CHAW148PP 12.87 327 6.87 174 16 14.00 x 8.00 356 x 203

CHAW1412PP 12.87 327 10.87 276 16 14.00 x 12.00 356 x 305

CHAW1610PP 14.87 378 8.87 225 16 16.00 x 10.00 406 x 254

CHAW1614PP 14.87 378 12.87 327 16 16.00 x 14.00 406 x 356

Hardware Packages

Catalog # Description Typical Use Quantity

CH10168 #8-32 x .375 self-tap steel screw JIC performed panels 20

Panels & Panel AccessoriesJIC Enclosure Perforated PanelsIllustration Sheet and Catalog Number

Accessories

Accessories


B

A (omit when enclosure height is less than 36 inches)

(omit when enclosure width is less than 36 inches)

.56 D hole(14)

.75(19).81

(20)

.81(20)

* Panel also fi ts these enclosures when height and width dimensions are reversed.

NEMA flanged panels can be installed in consoles, Type 4X, Type 4 and Type 12 NEMA enclosures.

Panels are available in steel, galvanized steel, stainless steel and aluminum. Painted steel panels have a white powder paint finish. Stainless steel and aluminum panels have a smooth brushed finish on one side and are protected with PVC film.

CL

CL


encl

osur

e he

ight

-4.

75

(121

)


NEMA Flanged Panel Catalog # A BGauge

Fits Enclosure

Height x Width

Painted Steel Galvanized Steel Stainless Aluminum in. mm. in. mm. in. mm.

CHAW2420P CHAW2420GP CHAW2420SP CHAW2420AP 20.87 530 16.87 428 12 24.00* x 20.00* 610 x 508








CHAW3636P - CHAW3636SP - 32.87 835 32.87 835 12 36.00 x 36.00 914 x 914

CHAW4224P - - - 38.87 987 20.87 530 12 42.00* x 24.00* 1067 x 610



CHAW4242P - - - 38.87 987 38.87 987 12 42.00 x 42.00 1067 x 1067

CHAW4824P - - - 44.87 1140 20.87 530 12 48.00* x 24.00* 1219 x 610

CHAW4830P CHAW4830GP CHAW4830SP - 44.47 1130 26.87 682 12 48.00* x 30.00* 1219 x 762



CHAW4848P - - - 44.87 1140 44.87 1140 12 48.00 x 48.00 1219 x 1219

CHAW6030P - - - 56.87 1444 26.87 682 12 60.00* x 30.00* 1524 x 762


CHAW6042P - - - 56.87 1444 38.87 987 12 60.00* x 42.00* 1524 x 1067

CHAW7230P - - - 68.87 1749 26.87 682 12 72.00 x 30.00 1829 x 762

CHAW7236P - - - 68.87 1749 32.87 835 12 72.00 x 36.00 1829 x 914

Panels & Panel AccessoriesNEMA Flanged PanelsIllustration Sheet and Catalog Number

Acc

esso

ries

Accessories


B

A C

encl

osur

e he

ight

-5.

75

(146

)


(omit when enclosure height is 72 inches)

add when enclosure height is 72 inches

add when enclosure height is 72 inches

.56 D Hole(14)

.75(19).81

(20)

.81(20)

* Panel also fi ts Type 4X and Type 4 where the height is 2.00 inches more than shown in the table.

Large flanged panels can be installed in floor-standing Type 4X, Type 4 and Type 12 enclosures.

Handle kits are furnished with each panel. Steel panels have a white powder paint finish. Stainless steel and aluminum panels have a smooth brushed finish on one side and are protected with PVC film.

CL

CL


Panel Catalog # A B CGauge

Fits Enclosure*

Height x Width

Steel Stainless Aluminum in. mm. in. mm. in. mm. in. mm.

CHAW5442P - - 49.87 1267 37.87 962 - - 10 54.00 x 42.00 1372 x 1067

CHAW6048P CHAW6048SP CHAW6048AP 55.87 1419 43.87 1114 - - 10 60.00 x 48.00 1524 x 1219

CHAW6060P CHAW6060SP CHAW6060AP 55.87 1419 55.87 1419 - - 10 60.00 x 60.00 1524 x 1524

CHAW7260P CHAW7260SP CHAW7260AP 67.87 1724 55.87 1419 22.06 560 10 72.00 x 60.00 1829 x 1524

CHAW7272P CHAW7272SP CHAW7272AP 67.87 1724 67.87 1724 22.06 560 10 72.00 x 72.00 1829 x 1829

Panels & Panel AccessoriesLarge NEMA Flanged PanelsIllustration Sheet and Catalog Number

Accessories

Accessories


This kit offers a means for mounting user’s components and equipment near the front of an enclosure opening for easy access.

The JIC swing panel kit includes two (2) hinge brackets, two (2)fastening brackets, knurled thumb screws, retaining hardware and instructions for installing standard panels. Panels must be ordered separately.

Front View(without cover)

Panel Fastening Detail Panel Hinge Detail


encl

osur

e he

ight

-1.

75

(44)

fastening-bracket

hinge bracket

hinge (w/o cover)

thumb screw

panel (order separately)

fastening bracket

X X

hinge bracket

clamp bracket

(w/o clip)

X=.62 (16) Min. for all JIC enclosures except quick release type.X= 1.37 (35) min. for JIC quick-release type.


Panels & Panel AccessoriesJIC Swing PanelsIllustration Sheet and Catalog Number


CHJICSPK

For use with JIC enclosures that are 8.00 (203 mm) x 6.00 (152 mm) inches or larger. The distributed weight of panel and equipment should not exceed 25 pounds.

Acc

esso

ries

Accessories


This kit offers a means for mounting user’s components and equipment near the front of an enclosure opening for easy access.

The JIC swing panel kit includes two (2) hinge brackets, two (2) fastening brackets, knurled thumb screws, retaining hardware and instructions for installing standard panels. Panels must be ordered separately.

Front View(without door)

Panel Fastening Detail

Panel Hinge Detail


encl

osur

e he

ight

-4.

75

(121

)

fastening bracket

hinge bracket

thumb screw

see fastening detail see hinge detail

fastening bracketY

X

hinge bracket

clamp bracket (w/o clip)

X= 1.37 (35) min. Type 4, Type 4X & Type 12 Single-Door

Y= 1.25 (32) min. Type 4, Type 4X & Type 12 Single-Door

X= 1.00 (25) min. Large Type 12 CHSC Enclosures

Y= .87 (22) min. Large Type 12 CHSC Enclosures

hinge (w/o door)

Notes: Large Type 12 CHSC enclosures have back panels installed. Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Panels & Panel AccessoriesNEMA Swing PanelsIllustration Sheet and Catalog Number


CHNSPK

For use with Type 4, Type 4X and Type 12 single-door enclosures 16.00 (406 mm) x 12.00 (305 mm) and larger, provided the distributed weight of panel and equipment does not exceed 100 pounds. Also used on the larger Type 12 CHSC.

Accessories

Accessories


Designed to provide additional support to panels which are burdened with heavy equipment. Supports fi t over the bottom corner collar studs. Each support bracket can be adjusted so that the load can be shared between the support and the stud. A “jam” nut maintains the adjustment. At the base of the support bracket is a nylon shoe to prevent damage to the interior fi nish. Two support bracket assemblies are furnished with each kit.

Two (2) panel lifting hooks are used for picking up and moving large panels. The hooks are designed to be used on back panels while laying fl at.


Panels & Panel AccessoriesPanel Support & Lifting HooksIllustration Sheet and Catalog Number


CHPS3 For use on Single-Door and Double-Door Floor-Standing Enclosure Panel

CHPS9 For use on Free-Standing and Multi-Door Free-Standing Enclosure Panel


CHPLH Panel lifting hooks

Panel Support Kits

Panel Lifting Hooks

Acc

esso

ries

Accessories



Steel framed window kits are designed for use with Type 4 and Type 12 enclosures. Stainless steel framed window kits are for use with Type 4X enclosures, however, they can also be used on Type 4 and Type 12, if additional corrosion protection is needed. Steel kits are constructed from heavy gauge and have an ANSI 61 gray polyester powder fi nish. Stainless steel kits are con-structed from Type 304 stainless and have a brushed fi nish. Each kit includes a .25 inch (6 mm) thick polycarbonate window and gasket to ensure a tight, oil- and water-resistant seal around the enclosure cut-out. Hardware and instructions for fi eld installation are also furnished. UL Listed.

B

C

D

A

.31(8)

.62(16)

gasket

window

frame

retaining hardware

Window KitsFixed WindowIllustration Sheet and Catalog Number

Framed Window Kits

Catalog #

Frame Detail Window Detail Fits Enclosure

Cut-outA B C D

Steel Stainless in. mm. in. mm. in. mm. in. mm. in. mm.

CHPWK53 CHPWK53SS 7.50 191 5.50 140 5.00 127 3.00 76 6.62 x 4.62 168 x 117

CHPWK95 CHPWK95SS 11.50 292 8.00 203 9.00 229 5.50 140 10.62 x 7.12 270 x 181

CHPWK133 CHPWK133SS 15.50 394 5.50 140 13.00 330 3.00 76 14.62 x 4.62 371 x 117

CHPWK138 CHPWK138SS 15.50 394 10.50 267 13.00 330 8.00 203 14.62 x 9.62 371 x 244

CHPWK175 CHPWK175SS 19.50 495 8.00 203 17.00 432 5.50 140 18.62 x 7.12 473 x 181

CHPWK1711 CHPWK1711SS 19.50 495 13.50 343 17.00 432 11.00 279 18.62 x 12.62 473 x 321

CHPWK2315 CHPWK2315SS 25.50 648 17.50 445 23.00 584 15.00 381 24.62 x 16.62 625 x 422

CHPWK2919 CHPWK2919SS 31.50 800 21.50 546 29.00 737 19.00 483 30.62 x 20.62 778 x 524

CHPWK3523 CHPWK3523SS 37.50 953 25.50 648 35.00 889 23.00 584 36.62 x 24.62 930 x 625

Accessories

Accessories



Door stop kits are intended for most Type 4, Type 4X and Type 12 Single-Door Wall-Mount enclosures that have a minimum width of 16 inches. The kit is designed to mount at the top or bottom of the door opening. When properly installed, the door can be held open approximately 135˚. Tools are not necessary to affix or release the stop. When not in use, the assembly folds and locks neatly away. Each kit contains detailed mounting instructions and all the necessary hardware for field assembly.

Print pockets provide a convenient place to store operation manuals, diagrams or other documents inside the enclosure. Thermoplastic pockets are gray and have cutaway areas for viewing contents. Pockets have adhesive backing for mounting inside on enclosure door.


CHDSTOPK Door Stop Kit

Door Stop Kits

Print Pockets

Catalog #Length x Width

in. mm.

CH32170 6.00 x 6.00 152 x 152

CH32171 10.00 x 10.00 254 x 254

CH32172 9.00 x 12.00 229 x 305

Window & Door Kit AccessoriesIllustration Sheet and Catalog Number

Acc

esso

ries

Accessories



Hole Pattern Detail

X(inside edge of door)

DD Punch

.75(19)

.625(16)

Hole Pattern Detail

(inside edge of door)

DD Punch

.75(19)

.625(16)

Flush lock is intended for 1-point field modification to most Type 4 and Type 12 Single-Door Wall-Mount enclosures.

Included is detail instructions for the door hole size and location (see detail at right). The lock is steel with a bright plated finish.

1.81(47)

X = 1.18 (30) JIC EnclosureX = 1.68 (43) Large Type 12 CHSC Enclosure

Flush locks are intended for 1-point field modifications to most Type 4 and 12 JIC enclosures as well as the large Type 12 CHSC enclosures.

Included is detail instructions for the door hole size and location (see detail at right). The lock is steel with a bright plated finish.


CH25352 A JIC Type 4 & 12 fl ush lock


CH25351 A NEMA Type 4 & 12 fl ush lock

Type 4 & Type 12 JIC Enclosure Flush Lock

Type 4 & Type 12 NEMA Enclosure Flush Lock

Locks, Latches, Inserts & HandlesFlush LocksIllustration Sheet and Catalog Number

Accessories

Accessories



CH25270 A Slotted fl ush latch

CH25278 A Triangle fl ush latch key

CH25277 A Triangle fl ush latch

CH25289 A Square fl ush latch key

CH25288 A Square fl ush latch

Security latch inserts interchange with slotted quarter-turn fl ush latch and provide security and control access to interior of enclosure. Inserts include matching key.

CH3MDBLK

CH7MTLK

CH7MSLK

A = Chrome PlateIntended to be used on Type 4 and Type 12/13 enclosures which utilize external screw clamps. Latches require a hole punched or drilled in the door for installation. Once installed, an internal O-ring and external gasket maintain a dust-tight and water-tight seal. The tamper-resistant latches require specifi c keys to gain access.

CH25270A

CH25277A

CH25288A

CH25278 A

CH25289A





Type 4 Premier Enclosure Security Inserts

Type 4 & Type 12 Security Latch Kits

Locks, Latches, Inserts & HandlesInserts, Locks & LatchesIllustration Sheet and Catalog Number

Acc

esso

ries

Accessories



CHT4DLBM Type 4 – small slotted latch, black fi nish

CHT4LDLB Type 4 – large slotted latch, black fi nish


CHT4WNBM Type 4 – small wing knob, black fi nish

CHT4WNB Type 4 – large wing knob, black fi nish


CHT4KLWNB Type 4 – large key locking wing knob, black fi nish


CHT4KLWNBM Type 4 – small key locking wing knob, black fi nish


CHT4PLWNB Type 4 - large padlockable wing knob, black fi nish

Locks, Latches, Inserts & HandlesInserts. Locks & LatchesIllustration Sheet and Catalog Number

Type 4 Quarter-Turn Enclosure Locks & Latches

CHT4WNBM & CHT4WNB

CHT4DLBM & CHT4LDLB

CHT4KLWNB

CHT4KLWNBM

CHT4PLWNB

Accessories

Accessories



CH7MT4SLKB & CH6MT4SLKBM

CH7MT4TLKB & CH6.5MT4TLKBM

CHT4KLTHB

CHT4THB

CH4MT4HXLKBM

CH4MT4HXLKBM

CH3MT4DBLKB

Locks, Latches, Inserts & HandlesLocks, Latches & InsertsIllustration Sheet and Catalog Number

Type 4 Quarter-Turn Enclosure Inserts, Locks & Latches

Type 4X Quarter-Turn Enclosure Latch


CHT4THB Type 4 - large t-handle non-locking, black fi nish


CH4MT4HXLKBM Type 4 – small security insert (4mm socket hex), black fi nish


CHT4XDLSSM Type 4X – small slotted latch, stainless steel

CHT4XLDLSS Type 4X – large slotted latch, stainless steel


CH3MT4DBLKB Type 4 – large security insert 3mm double bit), black fi nish


CH7MT4SLKB Type 4 – large security insert (7mm square), black fi nish

CH6MT4SLKBM Type 4 – small security insert (6mm Square), black fi nish


CH7MT4TLKB Type 4 – large security insert (7mm triangle), black fi nish

CH6.5MT4TLKBM Type 4 – small security insert (6.5mm triangle), black fi nish


CHT4KLTHB Type 4 - large t-handle key locking, black fi nish

Acc

esso

ries

Accessories


Locks, Latches, Inserts & HandlesType 4 Premier™ Series Enclosure Handle InsertsIllustration Sheet and Catalog Number



CHWMHK-01 Wall-mount handle, key locking – keyed 01





Wall-Mount HandlesPadlocking, key locking or non-locking handles are interchangeable with standard slotted quarter-turn flush latch on Premier Series

enclosures. Available keyed alike or keyed different; please specify when ordering.

CHWMHNL non-locking

CHWMHK-01 thru CHWMHK-04 key lockable

CHWMHPTO padlockable

Accessories

Accessories



The Type 4 door handles can be used as replacement locks for Type 12 double-door wall mounts, disconnect enclosures, and the EnviroShield™ enclosures. Handles are a zinc die cast construction with a textured powder coat fi nish to provide durability and corrosion resistance.

An optional built-in spring loaded defeater provides a two-handed operation requirement and a standard padlockable handle trigger provides secondary security. A removable lock plug allows for clockwise or counterclockwise operation. Handles are supplied with nut, screw and gasketing materials.

Hole Template

The Type 4 door handles can be used as replacement locks for Type 12 free- and fl oor-standing enclosures, and Type 4 handle enclosures.

Handles are a zinc die cast construction with a textured powder coat fi nish to provide durability and corrosion resistance. A key lock and pad-lockable handle trigger provides secondary security. A removable lock plug allows for clockwise or counterclockwise operation.

Handles are supplied with nut, screw, a key, and gasketing materials.

Hole Template

Kit includes these parts shown above

** Specify enclosure height after the catalog number, (20, 24, 30, 36, 42, 48, 60, 72). (Example: 00011184 A60 for 60 inch height).

Type 12 door handle kits are intended for 3-point fi eld modifi cations to most Type 12 and Type 4 enclosures with a height from 20 inches (508 mm) to 72 inches (1829 mm).

Kits include a handle, cam, rods, spacer, rollers, adjustable rod guides and all hardware necessary for assembly. The adjustable rod guides have multiple settings for desired gasket compression.

Detailed instructions are also furnished which include a door hole pattern for fi eld mounting the handle assembly (see detail on this page).

Locks, Latches, Inserts & HandlesHandlesIllustration Sheet and Catalog Number

Catalog # Description Defeater

CH00011184 A Type 4 & 12 handle Turn Tool

Catalog # Description Defeater

CH00011184 A** Type 4 & 12 handle kit Turn tool

Type 4 & 12 Handle

Type 4 & 12 Handle Kits


CHT4PKHB Type 4 & 12 handle, key locking

Type 4 & 12 Door Handle, Key Locking

Acc

esso

ries

Accessories




** Specify enclosure height after the catalog number, (20, 24, 30, 36, 42, 48, 60, 72). (Example: 00011184 A60 for 60 inch height).

Type 4 door handle kits are intended for 3-point fi eld modifi cations to most Type 12 and Type 4 enclosures with a height from 20 inches (508 mm) to 72 inches (1829 mm).


Detailed instructions are also furnished which include a door hole pattern for fi eld mounting the handle assembly.


** Specify enclosure height after the catalog number, (20, 24, 30, 36, 42, 48, 60, 72). (Example: CHT4XPHSS A60 for 60 inch height).

Type 4X door handle kits are intended for 3-point fi eld modifi cations to most Type 4X enclosures with a height from 20 inches (508 mm) to 72 inches (1829 mm).


Detailed instructions are also furnished which include a door hole pattern for fi eld mounting the handle assembly (see detail on this page).

The Type 4X door handles can be used as replacement locks for Type 4X wall-mounts and Type 4X free and fl oor-standing enclosures.

Handles are a die cast stainless steel construction to provide durability and corrosion resistance. A standard padlockable handle trigger pro-vides secondary security. A removable lock plug allows for clockwise (CW) or counterclockwise (CCW) operation.

Handles are supplied with nut, screw and gasketing materials.

Hole Template

Locks, Latches, Inserts & HandlesHandlesIllustration Sheet and Catalog Number


CHT4PKHB** Type 4 & 12 handle, key locking, kit


CHT4XPHSS Type 4X handle


CHT4XPHSS** Type 4X handle, kit

Type 4 & 12 Door Handle, Key Locking

Type 4X Door Handle

Type 4X Door Handle Kits

Accessories

Accessories



This kit is intended to be used in place of standard JIC cover clamps to provide quick access into an enclosure. Clamps will fi t JIC Type 4X, 4 and 12 hinge and clamp cover enclosures. They will also replace the clamps used on NEMA 12 and 4X feed-through wireway and NEMA 12 and 4X wiring trough.

These clamps will not fi t the JIC screw or quick-release cover designs.

Each kit includes washers for fi tting between the enclosure bracket and the fast-access clamp to control gasket compression. Kits are available in plated steel (Type 12 enclosures) and stainless steel (Type 4X & 4 enclosures). UL Listed.

This kit is intended as replacement clamp parts on all JIC Type 4X and JIC Type 4 Wall-Mount and Floor-Standing Enclosures.

Each kit contains two each - stainless steel cover clamps, stainless steel screws and 1/4” hardware.

CHL23

CHL23SS

Clamp & Padlock KitsClampsIllustration Sheet and Catalog Number

Catalog # Description Quantity

CHJ4XCK2 Type 4 & 4X cover clamp kit 1 kit


CHL23 Fast-clamp, steel 1

CHL23SS Fast-clamp, stainless 1

JIC 4 & 4X Cover Clamp Kit

JIC Fast-Access Clamp Kit

Acc

esso

ries

Accessories



This kit is intended to be used in place of standard NEMA door clamps to provide quick access into an enclosure.

Clamps will fi t Type 4X, 4 and 12 Single-Door Wall-Mount Enclosures. They will also replace the clamps used on Type 4X and Type 4 Floor-Standing Enclosures.

Each kit contains two each - door clamps, fast access screw fasteners, springs and washers. Gasket compression is controlled by turning the handle in or out of the bracket. UL Listed.

This kit is intended as replacement clamp parts on Type 4X and Type 4 Wall-Mount and Floor-Standing Enclosures.

Each kit contains two each - door clamps, screws, springs, washers and 1/4” hardware. All clamp parts and hardware are stainless steel.

Clamp & Padlock KitsClampsIllustration Sheet and Catalog Number


CHN4XCK2 Type 4 & 4X door clamp kit 1 kit


CHFC412SS Type 12, 4 & 4X fast-clamp kit, stainless 1 Kit

Type 4 & 4X Door Clamp Kit

NEMA Type 12, 4 & 4X Fast-Access Clamp Kit

Accessories

Accessories



Clamp & Padlock KitsPadlock KitIllustration Sheet and Catalog Number


CHPLKJIC Padlock kit

CHPLKJICSS6 Padlock kit, Type 316 stainless steel

JIC Padlock Kit

The JIC padlock kit is designed to fi eld install on all JIC type and larger Type 12 CHSC enclosures. Mounting hardware and instructions are provided.

Acc

esso

ries

Accessories



Intended for use with Type 12 enclosures and is an excellent means of providing a removable access plate to an enclosure and still maintain its listing.

The gland plate is constructed from (16) gauge steel and has ANSI 61 gray polyester powder fi nish. Fastening is done from the inside of the enclosure to prevent tampering.

Hardware and instructions are included with the kit. UL Listed.

.75 min(19) enclosure back

1.00 min. (25)

B

A

Enclosure Cut-out

Bolt-on AccessoriesIllustration Sheet and Catalog Number


CHFSHELF12 12” x 12” fl at mounting surface

CHFSHELF18 18” x 18” fl at mounting surface

Folding Shelf Kit

Gland Plates

The folding shelf is intended to mount inside or outside of enclosure to support components, sensitive instruments and other equipment which may be integral to the enclosure.

When properly installed, the shelf will fold open into a locked position perpendicular to the mounting surface. When not in use, the shelf folds down into a locked position.

The folding shelf is constructed from heavy gauge steel and has a white polyester powder paint fi nish.

Catalog #Gland Plate Detail

Enclosure Cut-outD E

Type 304 in. mm. in. mm. in. mm.

GP610 6.00 152 10.00 254 5.00 x 9.00 127 x 229

GP618 6.00 152 18.00 457 5.00 x 17.00 127 x 432

Accessories

Accessories


4.62(117)

.50 D hole(13)

.50 D hole(13)

4.62(117)

9.87(251)

7.87(200)

7.87(200)

7.87(200)

A

A B

B

12.00(305)

C

Base 20 - 24 Deep Base 8 - 16 Deep Floor Stand Kit

CL


Floor stand kits are intended for use with Type 4X, Type 4 and Type 12 Wall-Mount Enclosures where fl oor support is required. They are easily installed on most enclosures where the width is 20 inches (508 mm) or more. The enclosure mounting feet need not be removed in order to install fl oor stand kits.

Each kit consists of two (10) gauge legs and hardware for mounting. At the base of each leg is a pre-punched plate (see drawing). Steel kits have a gray polyester powder paint fi nish. Stainless steel kits are fabricated from 304 alloy. Standard fl oor stand kits are 12 inches (305 mm) high. For special heights or non-standard construction, consult factory.

Enclosure stabilizers are heavy gauge with a wide base for use with NEMA fl oor stand kits which add stability to large enclosures or top heavy enclosures. Two thumb screws thread into the offset piece and secure the stabilizer to the base of the leg. Two stabilizers are furnished. They are fi nished with a bright caution orange enamel paint.

StainlessSteel

Catalog # D E F

Type 304 Type 316L in. mm in. mm in. mm

CHMFK8 CHMFK8XS 8.00 203 6.06 154 - -

CHMFK10 CHMFK10XS 10.00 254 8.06 205 - -

CHMFK12 CHMFK12XS 12.00 305 10.06 256 - -

CHMFK16 CHMFK16XS 16.00 406 14.06 357 - -

CHMFK20 CHMFK20XS 20.00 508 18.06 459 8.00 203

CHMFK24 CHMFK24XS 24.00 610 22.06 560 10.00 254

Bolt-On AccessoriesFloor Stand Kit & Enclosure StabilizerIllustration Sheet and Catalog Number

Catalog # Quantity

CHES2 2

Enclosure Stabilizer

Floor Stand Kit

Acc

esso

ries

Accessories



Excellent for providing ventilation in enclosures where external conditions or internal components may cause excessive amount of heat or moisture. Designed to be used with Crouse-Hinds fi lter kits using the same cut-out and mounting hole confi gurations.

Louver plate kits include all of the necessary hardware and instructions for fi eld installation. Plates are constructed from (16) gauge steel and have an ANSI 61 gray polyester powder fi nish.

B

D

A C

E

.87(22)

.37(9)

.21 D hole (5)

(omit centerholes whenless than (12)louvers)

CL

CHLPK84 to CHLPK812

Typical

CHLPK23 to CHLPK66

Typical

BD

A

C

E

.37 (9)

.37(9)

.21 D hole (5)

(omit center holes when less than (6)louvers)

CL

Bolt-on AccessoriesLouver Plate KitsIllustration Sheet and Catalog Number

Louver

Plate Kit

Louver Plate SizeC D

Louver Plate Detail Enclosure Cut-out Area OpeningA B E Depth

QuantityHeight Width

Catalog # in. mm. in. mm. in. mm. in. mm. in. mm. in. mm. in. mm. in. mm. sq. in.

CHLPK23 3.25 83 3.25 83 2.50 64 2.50 64 2.00 51 .25 6 3 2.12 54 2.12 54 1.10

CHLPK33 3.87 98 4.50 114 3.12 79 3.75 95 3.00 76 .25 6 3 2.50 64 3.12 79 1.68

CHLPK34 4.75 121 4.50 114 4.00 102 3.75 95 3.00 76 .25 6 4 3.37 86 3.12 79 2.20

CHLPK43 4.50 114 5.50 140 3.75 95 4.75 121 4.25 121 .25 6 3 3.00 76 4.12 105 2.30

CHLPK44 5.62 143 5.50 140 4.87 124 4.75 121 4.25 121 .25 6 4 4.00 102 4.12 105 3.10

CHLPK64 5.62 143 7.50 191 4.87 124 6.75 171 5.50 140 .25 6 4 4.25 121 6.12 155 4.10

CHLPK66 7.87 200 7.50 191 7.12 181 6.75 171 5.50 140 .25 6 6 6.50 165 6.12 155 6.10

CHLPK84 5.81 148 10.50 267 5.06 129 8.75 222 4.25 108 .25 6 8 4.25 121 8.12 206 6.30

CHLPK86 8.19 208 10.50 267 7.44 189 8.75 222 4.25 108 .25 6 12 6.50 165 8.12 206 9.50

CHLPK88 10.56 268 10.50 267 9.81 249 8.75 222 4.25 108 .25 6 16 8.75 222 8.12 206 12.70

CHLPK812 15.31 389 10.50 267 14.56 370 8.75 222 4.25 108 .25 6 24 13.25 337 8.12 206 19.00

Accessories

Accessories



Designed for use with louver plate kits. The fi lter mounts securely inside of the enclosure using the brackets and hardware furnished with the kit. The fi lter is comprised of fi nely woven aluminum strips which offer protection against airborne dust and dirt. Periodic washing with warm water is needed to keep the Filter clean. For best results, coating with air fi lter adhesive is recommended.

Use the fi lter adhesive to help increase effi ciency of air fi lters. The adhesive spray helps trap small particles that normally pass through the fi lter and helps protect the elements within.

FilterUsed with

Louver Plate

Catalog # Catalog #

CHFLT33 CHLPK33

CHFLT34 CHLPK34

CHFLT43 CHLPK43

CHFLT44 CHLPK44

CHFLT64 CHLPK64

CHFLT66 CHLPK66

CHFLT84 CHLPK84

CHFLT86 CHLPK86

CHFLT88 CHLPK88

CHFLT812 CHLPK812

Bolt-on AccessoriesFilters & Filter AdhesiveIllustration Sheet and Catalog Number

Filters

Catalog # Quantity

CHFAS-412 14 oz. aerosol spray

Filter Adhesive

Acc

esso

ries

Accessories



BC .50

(13)

A Baffl e plates are intended to be used with louver plates when it is necessary to prevent direct access into the enclosure through the louver opening. The plate is designed to mount to the inside of the enclosure using the same cut-out and mounting holes required to mount the louver plate kit.

Plates are (16) gauge steel and have an ANSI 61 gray polyester powder fi nish. UL Listed.

.21 D hole (5)

Protects knockout openings and extra pushbutton or conduit openings from dirt, oil, dust and water. Each hole seal has oil-resistant gasketing and plated stud and wing nut. Available in steel fi nished with ANSI 61 polyester powder or unpainted stainless steel.

Painted Steel - UL Listed as Type 3R, 12, 13, & 4

Stainless Steel - UL Listed as Type 4X

Bolt-on AccessoriesBaffle Plates & Hole SealsIllustration Sheet and Catalog Number

Baffle Plate A B CUsed with

Louver Plate

Catalog # in. mm. in. mm. in. mm. Catalog #

CHBP23 3.25 83 3.25 83 2.50 64 CHLKP23

CHBP33 3.87 98 4.50 114 3.75 95 CHLPK33

CHBP34 4.75 121 4.50 114 3.75 95 CHLPK34

CHBP43 4.50 114 5.50 140 4.75 121 CHLPK43

CHBP44 5.62 143 5.50 140 4.75 121 CHLPK44

CHBP64 5.12 130 7.50 191 6.75 171 CHLPK64

CHBP66 7.37 187 7.50 191 6.75 171 CHLPK66

CHBP84 5.31 135 9.50 241 8.75 222 CHLPK84

CHBP86 7.68 195 9.50 241 8.75 222 CHLPK86

CHBP88 10.06 256 9.50 241 8.75 222 CHLPK88

CHBP812 14.81 376 9.50 241 8.75 222 CHLPK812

Catalog #Application

Max. Hole

Diameter

Hole Seal

Diameter

Steel Stainless in. mm. in. mm.

CHSPBG CHSPBGSS Miniature oil-tight pushbutton holes 0.88 22 1.22 31

CHSPB CHSPBSS Standard oil-tight pushbutton holes 1.25 32 1.75 44

CHS050 CHS050SS 1/2-inch conduit holes 0.88 22 1.38 35

CHS075 CHS075SS 3/4-inch conduit holes 1.06 27 1.56 40

CHS100 CHS100SS 1-inch conduit holes 1.38 35 1.88 48

CHS125 CHS125SS 1 1/4-inch conduit holes 1.69 43 2.19 56





CHS350 CHS350SS 3 1/2-inch conduit hole 4.12 105 4.62 117


Baffle Plates

Oil-Tight Hole Seals

Accessories

Accessories



The NEMA 4X drip shield kit is intended for use with Type 4X and Type 4 Single-Door Wall-Mount Enclosures. It offers protection to the door and hardware from dripping water and falling dust. The drip shield is constructed from (14) gauge steel and has a fi ne brushed fi nish. The shield attaches to the enclosure top front. The kit includes a drip shield, stainless steel hardware and sealing compound. UL Listed.

Bolt-on AccessoriesDrip ShieldsIllustration Sheet and Catalog Number

Catalog # Fits Enclosure

CHDK12SS 12.00 inch wide






NEMA 4X Drip Shield Kits

Acc

esso

ries

Accessories


Bolt-on AccessoriesComponent Mounting DeviceIllustration Sheet and Catalog Number


The component mounting device is a small mounting aid especially designed to make mounting of small 35 mm DIN rail mountable components easier. It can be used whenever the installation of a 35 mm DIN rail is impractical, or when there is not enough space left in an enclosure. Because of its industrial grade self-adhesive, it can be installed much easier and quicker than a conventional DIN rail, without hole drilling and screw mounting.

Crouse-Hinds’ component mounting device can hold components up to 1.1 lbs in weight. The initial adhesive power is 40%. After 24 hours, it has its full holding power of 1.1 lbs. CHECMD1 can also be screw mounted if a more secure mounting is desired or if the surface is rough. All that is necessary to install Crouse-Hinds’ CHECMD1 is a smooth and clean surface. Sold in packages of five (5).

1.5(38)

1.5(38)

1.5(38)

1.7(43)

.55(13.5)

Mounting holes for screw mounting

Self-adhesive


CHECMD1 Small mounting aid

Component Mounting Device

ApplicationDirect attachment of small components and 35 mm DIN rails, EN 50022

Capacity0.44 lb. (200 g) initially 1.1 lb (500 g) after 24 hour waiting period

Mounting Surface

All smooth surfaces, (e.g. metals, laquered surfaces, plastics other than polyethylene, polypropylene and rubber). Mounting surface must be dry and free from dust, oil, separating agents and other contamination.

Dimensions 1.7 x 1.5 x 0.55” (43 x 38 x 14 mm)

Hole Pattern 0.5” distance, Δ 0.14” (12.8 mm; Δ 3.6 mm)

MaterialPolyamide (rated UL 94V-0) with non-deteriorating high-performance adhesive

Temperature Range -22° to +131°F (-30° to +55°C)

Included Mounting screw for perforated 35 mm DIN rail, EN 50022

Technical Data

Accessories

Accessories



B +.75 (19)

B

A

C

1.50(38)

fl at strap

channel bracket

shaded area is usable space

D (

usab

le s

pace

)

Terminal

Strap KitA B C D Quantity

of Straps

Fits EnclosureHeight x Width

Extra Strap

Kit

Catalog # in. mm. in. mm. in. mm. in. mm. in. mm. Catalog #

CH86TS 6.25 159 4.25 108 1.12 28 4.50 114 2 8.00 x 6.00 203 x 152 CH8TS

CH108TS 8.25 210 6.25 159 1.12 28 6.50 165 2 10.00 x 8.00 254 x 203 CH10TS

CH1210TS 10.25 260 8.25 210 2.43 62 8.50 216 3 12.00 x 10.00 305 x 254 CH12TS

CH1212TS 10.25 260 10.25 260 2.43 62 10.50 267 3 12.00 x 12.00 305 x 305 CH12TS

CH1412TS 12.25 311 10.25 260 2.43 62 10.50 267 3 14.00 x 12.00 356 x 305 CH14TS

CH1614TS 14.25 362 12.25 311 2.43 62 12.50 318 4 16.00 x 14.00 406 x 356 CH16TS

Electrical AccessoriesJIC Terminal Strap KitIllustration Sheet and Catalog Number

JIC terminal strap kits fit all styles and types of JIC enclosures. The kits are furnished with flat straps for mounting flat based terminal blocks. There is adequate space on each terminal strap should the user wish to provide another style of block. Terminal straps are made from (10) gauge steel with an electrogalvanized finish. They are fastened to channel clamping nuts which allows them to adjust along the width of the channel bracket assembly.

Extra strap kits can be ordered separately and come furnished with all hardware necessary for channel mounting.

Acc

esso

ries

Accessories


Electrical AccessoriesJIC Terminal Block Strip KitIllustration Sheet and Catalog Number


B +.75 (19)

B C

A

1.25(32)

terminal block strip

channel bracket assembly

D (

usea

ble

spac

e)

Terminal Block

Strip KitA B C D Quantity

of Straps


Extra Strip

Kit

Catalog # in. mm. in. mm. in. mm. in. mm. in. mm. Catalog #

CH86TB 6.25 159 4.25 108 2.15 55 4.50 114 2 8.00 x 6.00 203 x 152 CH8TB

CH108TB 8.25 210 6.25 159 2.15 55 6.50 165 2 10.00 x 8.00 254 x 203 CH10TB

CH1210TB 10.25 260 8.25 210 3.56 90 8.50 216 3 12.00 x 10.00 305 x 254 CH12TB

CH1412TB 12.25 311 10.25 260 3.56 90 10.50 267 3 14.00 x 12.00 356 x 305 CH14TB

CH1614TB 14.25 362 12.25 311 3.56 90 12.50 318 4 16.00 x 14.00 406 x 356 CH16TB

JIC terminal block strip kits fit all styles and types of JIC enclosures. Kits are furnished with terminal strips and contain medium duty channel mount terminal blocks, terminal end and clamps. Terminals have tubular screw type lugs which accept wire sizes from #18 through #8. Terminal strips are fastened to channel nuts which allow them to adjust along the entire width of the channel bracket assembly.

Extra strip kits can be ordered separately. They come furnished with all the hardware necessary for channel mounting but do not include the terminal blocks. Terminal blocks, ends and clamps can be ordered separately.

Accessories

Accessories


NEMA terminal strap kits fit Type 4, Type 4X and Type 12 enclosures. Kits are furnished with flanged straps for mounting flat base terminal blocks. There is adequate space on each terminal strap should the user wish to provide another style block. Terminal straps are (14) gauge steel with an electrogalvanized finish. They are fastened to channel nuts which allow them to adjust along the width of the channel bracket assembly. Three channel brackets are supplied with kits that fit enclosures that are 36 inches wide.

Extra strap kits can be ordered separately and come furnished with all hardware necessary for channel mounting.

B +1.00 (25)

A

C

1.50(38)

fl anged strap

shaded area is usable space

channel bracket assembly

omit when “B” is less than 36.00

D (u

sabl

e sp

ace)

CL

B

Terminal

Strap KitA B C D Quantity

of Straps


Extra Strap

Kit

Catalog # in. mm in. mm in. mm in. mm in. mm Catalog #

CH16TS12 11.25 286 7.25 184 2.18 55 11.75 298 2 16.00 x 12.00 406 x 305 CH16S

CH20TS16 15.25 387 11.25 286 2.18 55 15.75 400 3 20.00 x 16.00 508 x 406 CH20S

CH20TS20 15.25 387 15.25 387 2.18 55 15.75 400 4 20.00 x 20.00 508 x 508 CH20S

CH24TS20 19.25 489 15.25 387 2.18 55 19.75 502 4 24.00 x 20.00 610 x 508 CH24S

CH24TS24 19.25 489 19.25 489 2.18 55 19.75 502 5 24.00 x 24.00 610 x 610 CH24S

CH30TS20 25.25 641 15.25 387 2.18 55 25.75 654 4 30.00 x 20.00 762 x 508 CH30S

CH30TS24 25.25 641 19.25 489 2.18 55 25.75 654 5 30.00 x 24.00 762 x 610 CH30S

CH36TS24 31.25 794 19.25 489 2.18 55 31.75 806 5 36.00 x 24.00 914 x 610 CH36S

CH36TS30 31.25 794 25.25 641 2.18 55 31.75 806 6 36.00 x 30.00 914 x 762 CH36S

CH42TS30 37.25 946 25.25 641 2.18 55 37.75 959 6 42.00 x 30.00 1067 x 762 CH42S

CH48TS36 43.25 1099 31.25 794 2.18 55 43.75 1111 7 48.00 x 36.00 1219 x 914 CH48S

CH60TS36 55.25 1403 31.25 794 2.18 55 55.75 1416 7 60.00 x 36.00 1524 x 914 CH60S

Electrical AccessoriesNEMA Terminal Strap KitsIllustration Sheet and Catalog Number

Acc

esso

ries

Accessories



CHCTB3005 Medium duty channel mount terminal 1 5

CHCTE3001 Medium duty channel mount end 1 1

CHCT6005 Heavy duty channel mount terminal 2 5

CHCE6001 Heavy duty channel mount end 2 1

CHCTC2 Channel mount terminal clamp 1 & 2 2

CH25012A Channel Strip (72 inch) 1 & 2 1

Electrical AccessoriesChannel Mounted Terminal BlocksIllustration Sheet and Catalog Number


Medium duty channel mount terminal blocks are rated at 600 VAC, 50 Amps. Terminal lugs are plated copper and have tubular screw contacts. Terminal wire range is from #22 through #8 AWG. Each terminal block top has a painted marking area intended for circuit designation.

These blocks are designed to dovetail into channel and can be stacked in combination with both medium duty and/or heavy duty channel mount type terminals. One channel mount terminal end and two channel clamps are required to terminate a stack of blocks (order separately).

L=(.43+[N x.43]) (11+[N x11])

.43 (TYP)(11)

1.18(30)

1.18(30)

1.46(37)

.62(16)

.62(16)

marking area

N = number of terminal blocks

clamp

terminal end

1.23(31)

.18(5)

.18(5)

channelclamp

L=(.56+[N x.56]) (14+[N x14])

.56 (TYP) (14)

1.63(41)

marking area


clamp

terminal end

1.50(38)

channelclamp

Illustration 1

Illustration 2

CHCTB3005 CHCTE3001

CHCT6005

CHCTC2

CH25012A

CHCE6001

Heavy duty channel mount terminal blocks are rated at 600 VAC, 90 Amps. Terminal lugs are plated copper and have tubular screw contacts. Terminal wire range is from #18 through #4 AWG. Each terminal block top has a painted marking area intended for circuit designation.

These blocks are designed to dovetail into channel and can be stacked in combination with both heavy duty and/or medium duty channel mount type terminals. One channel mount terminal end and two channel clamps are required to terminate a stack of blocks (order separately).

Accessories

Accessories



Medium duty flat base type terminal blocks are rated at 600 VAC, 50 Amps. Terminal lugs are plated copper and have tubular screw contacts. Terminal wire range is from #22 through #8 AWG. Each terminal block top has a painted marking area intended for circuit designation.

These blocks are designed to stack in combination with both medium duty and/or heavy duty channel mount type terminals. One flat based terminal end and hardware is required to terminate a stack of blocks (order separately).

Heavy duty flat base terminal blocks are rated at 600 VAC, 90 Amps. Terminal lugs are plated copper and have tubular screw contacts. Terminal wire range is from #18 through #4 AWG. Each terminal block top has a painted marking area intended for circuit designation.

These blocks are designed to stack in combination with both heavy duty and/or medium duty flat base type terminals. One flat base terminal end and hardware is required to terminate a stack of blocks (order separately).

L=(.43+[N x.43]) (11+[N x11])

.43 (TYP) (11)

1.23(31)

.62(16)

marking area


terminal end

1.23(31)

L=(.56+[N x.56]) (14+[N x11])

.56 (TYP)(11)

1.30(33)

marking area


terminal end

1.50(38)

Illustration 1

Illustration 2

fi ts #8 screw

.12(3)

fi ts #8 screw .62(16)

.12(3)

CHFTB3005 CHFTE3001

CHFT6005 CHFE6001


CHFTB3005 Medium duty fl at base terminal 1 5

CHFTE3001 Medium duty fl at end, (includes #8 screws) 1 1

CHFT6005 Heavy duty fl at base terminal 2 5

CHFE6001 Heavy duty fl at end, (incudes #8 screws) 2 1

Electrical AccessoriesFlat Base Terminal BlocksIllustration Sheet and Catalog Number

Acc

esso

ries

Accessories



CHTSK (2) support brackets

Electrical AccessoriesTerminal Strap SupportIllustration Sheet and Catalog Number

This kit is intended for supporting the terminal straps and strips off the back of panels or enclosure walls.

The “Z” shaped brackets are made from (12) gauge steel and have a white enamel paint finish.

Two brackets and hardware are furnished with each kit. Terminal straps and strips must be purchased separately.

Accessories

Accessories



The CHELMSRM25 light is suitable for lighting in 19” racks, (e.g. for keyboards). Because of the fl at design of the light, only one rack unit (43.6mm) in height is needed. Additionally, it is fi tted with a refl ector which serves as a glare shield, thereby illuminating the area below the light only.

The light also features an integrated receptacle, allowing for the use of additional electrical devices, such as power tools.

Note: A passive infrared (PIR) motion sensor detects the motion of the enclosure door being opened and automatically turns on the light. The sensor is factory pre-set to turn the light off 5 minutes after all motion ceases. The motion sensor does not detect movement through glass or fi berglass, thus allowing installation in enclosure with glass doors.

CHELS25-120 CHELMS25-120

Electrical AccessoriesEnclosure LightsIllustration Sheet and Catalog Number Catalog # Description

CHELS25-120 Enclosure light with ON/OFF switch

CHELMS25-120 Enclosure light with motion sensor


CHELMSRM25-120 Enclosure light for 19” racks, integrated receptacle

Operating Voltage: 110-120V/50-60 Hz

Lamp Type: Compact fl uorescent light bulb

Power Consumption: 11 W (~75W incand.), Base: 2G7, electronic ballast

Light Intensity: 900 Lm

Lamp Life: 5,000 hours

Switch: On/off switch (for light only)

Motion Sensor: PIR = Passive Infrared (see note)

Receptacle: US/Canada, 120 VAC, 15A max.

Connection:3-pole screw terminal for AWG 14 max. (2.5 mm2) (includes cable strain relief)

Mounting:M5 screws (not included), 11.8” (300mm) hole distance or optional attached magnet (consult factory)

Dimensions:Length 13.6” (l345m) x Width 3.6” (91mm) x Depth 1.6” (40mm)

Housing: Plastic UL94V-0

Weight: 0.9 lbs. (0.4 kg) - 1.3 lbs. (0.6 kg) with magnet

Protection Type: IP 20

Agency Approvals: VDE, UL

Operating Voltage: 110-120V/50-60 Hz

Lamp Type: Compact fl uorescent light bulb

Power Consumption: 11 W (~75W incand.), Base: 2G7, electronic ballast

Light Intensity: 900 Lm

Lamp Life: 5,000 hours

Switch: On/off switch (for light only)

Receptacle: US/Canada, 120 VAC, 15A max.

Connection:3-pole screw terminal for AWG 14 max. (2.5 mm2)(includes cable strain relief only - no cable provided)

Mounting: Screws mounting (max. 1/4”)

Mounting Bracket: Aluminum, with cable bushing

Dimensions:Lamp 13.6” (345mm) x Width 3.6” (91mm) x Depth 1.6” (40mm) total length 19” (482mm)

Housing: Plastic UL94V-0

Weight: 1.1 lbs. (0.5 kg)

Operating Temp: -4°F to +122°F (-20°C to +50°C)

Storage Temp: -49°F to +158°F (-45°C to +70°C)

Protection Type: IP 20

Protection Class:I (grounded) with receptacle, II (double insulated) without receptacle

Agency Approvals: VDE, UL

Technical Data

Technical Data

The CHELS25 light was designed to fit in tight spaces in enclosures. It features an optional integrated receptacle so that electrical devices (e.g. power tools) can be easily plugged in when needed. The standard light can be screw mounted in a variety of positions, or the light can be fitted with a magnet mount (sold separately - consult factory). The motion sensor version was designed to eliminate the need for a door switch.

Acc

esso

ries

Accessories



Electrical AccessoriesInterlocks & Power StripsIllustration Sheet and Catalog Number

The CHBAEK115NDH is designed to be used with standard Crouse-Hinds enclosures that have no handles. This interlock requires drilling several holes in the cover and the body for mounting.

Catalog # Description Volts/Hz

CHBAEK115NDH Electrical interlock 120/60

Electrical Interlocks

This defeater is key operated and enables personnel to enter an enclosure while the enclosures’ internal components are energized. Turning the key disengages the circuit to the electrical interlock.


CHBAEKDF Defeater

Electrical Defeater

Catalog # DescriptionWeight Each

lbs. kg.

CHE2-PS-2.5F-6P-15A-S Power strip, 2.5 ft, 6 Port 3.0 1.3

CHE2-PS-3.5F-6P-15A-S Power strip, 3.5 ft, 6 Port 4.0 1.8

CHE2-PS-5F-10P-15A-S Power strip, 5 ft, 10 Port 4.0 1.8

CHE2-PS-6F-12P-15A-S Power strip, 6 ft, 12 Port 4.0 1.8

CHE2-PS-2.5F-6P-15A-L Power strip, 2.5 ft, 6 Port 3.0 1.3


CHE2-PS-5F-10P-15A-L Power strip, 5 ft, 10 Port 4.0 1.8






Power Strips

Catalog # DescriptionWeight Each

lbs. kg.

CHE2-PS-RM-6P-15A-SS 19” rack mount-surged 2.0 0.9

CHE2-PS-RM-6P-15A-NS 19” rack mount non-surged 2.0 0.9

Rack Mount Power Strips

Rack mount power strips are available in surge and non-surge design. Both with six (6) port configuration and 15 ft. (1.8m) cord.

L SeriesTwist Lock Plug

S SeriesStandard Plug

Accessories

Accessories


Provide a safe and convenient method for adding a receptacle/outlet inside electrical enclosures.

Electrical AccessoriesReceptaclesIllustration Sheet and Catalog Number


USA/Canada Germany France GBSwitzerland


CHER1 USA/Canada

CHER2 Germany

CHER3 France/Benelux

CHER4 Switzerland

CHER5 Great Britain/Ireland

Maximum Ratings: 15 amps @125 VAC

Mounting: Clip for 35 mm DIN rail, EN 50022

Connection: 3xAWG14 max. (2.5 mm)

Dimensions: 3.6 x 2.4 x 1.9” (92 x 62 x 48 mm)

Technical Data

Receptacles for Enclosures

Acc

esso

ries

Accessories


HardwareHardware Packages & Grounding DevicesIllustration Sheet and Catalog Number

Catalog # Description Typical Use Quantity

CH10168 #8-32 x .375 inch self-tapping steel screw Perforated panels 20

CH10169 #10-32 screw JIC 12 & 14, small 3R & 1 panel mounting 4

CH10240 A #10-32 stainless screw JIC 4X panel mounting 4

CH10242 A .375-16 stainless fl ange nut NEMA 4X panel mounting 4

CH10242 B .375-16 stainless fl ange nut NEMA 4X panel mounting 6

CH10242 C .375-16 stainless fl ange nut NEMA 4X panel mounting 8

CH10242 D .375-16 stainless fl ange nut NEMA 4X panel mounting 10

CH10243 A .375-16 fl ange nut NEMA 12 & 4, large 3R panel mounting 4

CH10243 B .375-16 fl ange nut NEMA 12 & 4, large 3R panel mounting 6

CH10243 C .375-16 fl ange nut NEMA 12 & 4, large 3R panel mounting 8

CH10243 D .375-16 fl ange nut NEMA 12 & 4, large 3R panel mounting 10

CH10108 A Formed hinge and screw RTHC cover mounting 2

CH10118 A #10-32 gasketed screw WPSC cover mounting 10

CH10129 A Oval head screw, cupped washer Type 1 telephone cabinet cover mounting 10

CH10119 A #10-32 retaining screw & washer JIC-SC, consolet, console, pushbutton cover mounting 10

CH10166 A 10-32 x .50 inch steel screw Miscellaneous cover mounting 20

CH10167 A 10-32 x .50 inch stainless screw MIscellaneous cover mounting 20

Hardware Packages

A variety of hardware packages intended to be used as replacement hardware parts for the different styles and types of Crouse-Hinds enclosures. For more information or for availability of other replacement parts, consult factory.

CSA grounding kit is intended for use on industrial control enclosures with panels where product must comply with Canadian Standards Association (CSA) requirements.

The kit includes hardware, labels and instructions for application. The grounding strap is used to provide electrical continuity between metal parts which must be electrically connected. The strap is stranded copper with a ring terminal at each end. The strap is insulated in green wrap.

CHGLK2

CHGS88

CHGS816

CHGS48

CHGS416

Grounding Devices

Catalog

#Description

Approximate

Wire Size

Length between

Ring Terminals

Ring Terminal for

Stud Diameter

in. mm. in. mm.

CHGLK2 Grounding kit - - - - -

CHGS88 Grounding strap #8 8.00 203 .250 6




Accessories

Accessories



CHSEALS Wire seal screw 10

CHSEALWN Wire seal wing nut 10

CHSEALC Wire seal clip 10


CH84033 White enamel touch-up paint

CH84034 ANSI 61 gray touch-up paint

Sealing Device Packages

Touch-up Paint

Sealing hardware devices are used as replacement pieces for various enclosures and wireway. All hardware is plated.

CH10184ACH10184B

CHSEALCCHSEALWNCHSEALS

CH10184C

Touch-up paint can be used to repair the finish of panels and enclosures. Paint is available in ANSI 61 and white enamel in 12oz. spray cans.

Catalog # Wire Range Fastener

CH10184 A #6-#14 AWG CU/AL #10-32

CH10184 B 1/0-#14 AWG CU/AL #10-32

CH10184 C 250MCM-1/0 AWG CU/AL .25-20

Catalog # Wire Range Fastener

CHTN228-20 Large, .375-16 thread 20

CHN624-20 Small, .25-20 thread 20

CHN627-20 Small, 10-32 thread 20

Ground Lug Kits

Channel/Clamping Nut Packages

HardwareGrounding Lugs, Sealing Devices, Channel Nuts & Touch-up PaintIllustration Sheet and Catalog Number

Ground lug kits are intended to provide a means for equipment grounding for most enclosures. Lug sizes 1/0 and above have a “J” shaped design to lay-in wire and cable. The fastener is colored green to meet NEC standards for grounding devices.

Channel nuts are intended to be used on channel strut typically found in consoles, free-standing, terminal, and disconnect enclosures. There are two sizes of clamp nuts available. One size fits the 1.62 inch wide (large) channel; The other fits the .81 inch wide (small) channel. The small channel nuts come in two thread sizes (see table).

Documents

Type 4 Panel Enclosures - eaton.com€¦ · Type 4 Panel Enclosures Type 4 Panel Enclosures EATON CORPORATION May 2013 5 Cover Clamp Layout CH443-4CHC CH643-4CHC CH863.5-4CHC CH644-4CHC