TYPE 3R fan filtersProtecting enclosures in outdoor applications

Shielded outdoor installationFandis Type 3R fan filters are specifically designed to meet the outdoor location

needs and provide a degree of protection to the enclosure and the internal

electrical control components from falling dirt, dust, rain, sleet and from damage

caused by the formation of ice.

The application rated 3R design includes durable plastic construction that allows

direct sunlight or water exposure without the risk of premature aging.

The need for temperature controlIn today’s control cabinets, thermal management takes

on a greater importance to ensure reliable performance.

Fan filters placement is a forced-air solution to maintain

an optimum climate in enclosures, avoiding costly

downtime and system failures.

TYPE 3R fan filters

Operation and aesthetics insuredThe FF series of fan filters is suitable to preserve the integrity

of components inside an electrical cabinet for outdoor use,

and ensure greater resistance to degradation due to

environmental factors.

The main benefits of the FF fan filters are:

waterproof

IP54 and IP55 protection

plastics construction against atmospheric deterioration

UV-resistant

quick tool-less mounting system with clips for .039 to 1.45in thick plates

Model Dimensions Cut-out Voltage Air Flow

(in) (in) (V) (CFM)

FF08 4.21x4.21 3.6x3.6 115/230V a.c., 12/24V d.c. 7.1-35.3

FF12 5.90x5.90 4.88x4.88 115/230V a.c., 24/48V d.c. 26.5-46.5

FF13 8.03x8.03 6.97x6.97 115/230V a.c., 24V d.c. 50-79.5

FF15 9.84x9.84 8.78x8.78 115/230V a.c., 24/48V d.c. 61.8-173.6

FF20 12.8x12.8 11.46x11.46 115/230V a.c. 261.8-587.1- TORRINO SERIE TP- GRUPPO FILTRO SERIE FF

- IGROSTATO- TERMOSTATI NC-NO- DOPPIO TERMOSTATO

- LAMPADA A LED SERIE FLL

- VENTILATORI COMPATTI

- DISPOSITIVO DI SICUREZZA LAMPEGGIANTE

- RISCALDATORI ANTICONDENSA SERIE H

TUTTI I PRODOTTI

- INTERRUTTORI FINE CORSA

RESISTANT

UV

IP54

IP55

Stainless Steel CoverSSC cover protects against splashing water and solid foreign objects and it is easily washable.

AISI 304 stainless steel cover of .04in with bayonet joint on support

Stainless steel support of .02in to apply between base and clips

OTHER OUTDOOR SOLUTION

(IP56)

TYPE 3R fan filters

TYPE 3R fan filtersProtecting enclosures in outdoor applications

Fandis North America Corp.4045 Five Forks Trickum Road

Suite D17, #120Lilburn, GA 30047

www.fandisna.com

MDAE-F2

1US/1_

0417

_FN

A