Upload
lyhanh
View
243
Download
4
Embed Size (px)
Citation preview
Tyco Security Products
Training Portfolio
Page 2
Table of Contents
TABLE OF CONTENTS 2
INTRODUCTION 4
TRAINING LOCATIONS 5
ONLINE COURSES 6
CCTV BASICS 8
ACCESS CONTROL BASICS 9
IT BASICS 10
ACCESS CONTROL 11
KANTECH ENTRAPASS LEVEL 1 12
KANTECH LEVEL 2 13
KANTECH INTEVO 14
C•CURE800 / 8000 SYSTEM OPERATOR 15
C•CURE800 / 8000 SYSTEM MANAGER 16
C•CURE9000 SYSTEM OPERATOR 17
C•CURE9000 SYSTEM MANAGER 18
C•CURE800 / 8000 LEVEL 1 19
C•CURE800 / 8000 LEVEL 2 20
C•CURE9000 LEVEL 1 21
C•CURE9000 LEVEL 2 22
C•CURE9000 LEVEL 3 (REDUNDANCY WITH EVERRUN) 23
C•CURE9000 LEVEL 4 (ENTERPRISE SOLUTION) 24
CCTV 26
MPLT 27
MP48+ 28
MP3200 29
SENSORRAIL 4 30
INTELLEX & NETWORK CLIENT BASIC 31
INTELLEX & NETWORK CLIENT ADVANCED 32
Page 3
HYBRID DVR (HDVR) 33
VIDEOEDGETM HYBRID APPLICANCE 34
AD VIDEOEDGETM LEVEL 1 (NVR & VICTOR) 35
AD VIDEOEDGETM LEVEL 2 (NVR & VICTOR) 36
EXACQ VISION 37
INTRUSION 39
DSC 9045-47 40
DSC POWER 1864 41
DSC ALEXOR 42
DSC IMPASSA 43
DSC POWERNEO 44
DSC SYSTEM III 45
VISONIC MSP-5 PANEL / SOS KIT 46
VISONIC POWER MAX EXPRESS 47
VISONIC POWER MAX ADVANCED 48
VISONIC POWER MASTER 49
VISONIC POWERMANAGE 50
BENTEL ABSOLUTA 51
Page 4
Introduction
Tyco Security Products is one of the world's leading suppliers of integrated security management
solutions.
Our portfolio of electronic security solutions under the world renowned American Dynamics,
Sensormatic, Software House, Kantech, CEM, Visonic, Bentel, DSC and Elpas brands is used by all
markets to secure people, products and premises throughout the whole logistics chain.
Our comprehensive range of digital and networked CCTV, Access Control, Electronic Tagging
products is supported by solid research and development, world class service, technical support and
training.
Tyco Security Products is represented throughout Europe, Middle East, Africa, Asia and Pacific by
both internal Tyco sales organisations plus an extensive network of distributors, integrators
and installers.
To help commissioning these ranges of products we provide Technical training courses.
The Technical Training Courses are available in different countries and for various languages
including English, Spanish, Italian, German and French.
The following icons will be displayed on each course description to indicate what language is
available for each course:
English
French
German
Italian
Spanish
Note: If the required course is not available in your preferred language you can send a Training
request to our Training administrative team, we will do our best to arrange the desired training for
you. Email us at: [email protected]
The Technical Support and training team offers also Online Trainings.
SP
IT
GE
FR
EN
Page 5
Training Locations
UK, Manchester Tyco Security Products Production Unit Grimshaw Lane M40 2WL Manchester Languages: English Road Map EN UK, Heathrow (London) Tyco Security Products Building 3; Heatrhrow boulevard 282 Bath Road ; Sipson UB7 0DQ West Drayton Languages: English Road Map EN France, Paris Tyco Building Services 5 rue des Chardonnerets 93290 Tremblay en France Languages: English
French Road Map: EN FR Spain, Barcelona Tyco Safety Products Avda. Les Garriges 41 edificio E Pol.ind.Masblau II 08820 El Prat de Liobregat Languages: English
Spanish Road Map: EN SP Spain, Madrid Tyco Safety Products Calle Caléndula 95 Compleja Miniparc II Edificio M, Planta 1 28109 Alcobendas Languages: English
Spanish Road Map: EN SP
Netherlands, Echt Tyco Security Products Voltaweg 20 1101 XK Echt Languages: English
German Road Map: EN GE NL Italy, Corropoli Bentel Security Srl Via Gabbiano 22 Zona Industriale Santa Scolastica 64013 Corropoli Languages: English
Italian Road Map: EN IT UAE, Dubai Tyco Valve & Controls Blue Shade KA6/KA7 Jebel Ali Free zone Dubai Languages: English Road Map EN South Africa, Midrand Tyco Security Products Unit 3B Thandanami Office Park Invicta Road Halfway Gardens ext.12 Midrand Languages: English Road Map EN
Midrand
d
Dubai
Corropoli
Madrid
Barcelona
Echt
Paris
Heathrow
Manchester
Page 6
Online Courses
Tyco provides various Instructional Materials and eLearning courses.
To download or view these courses all you need to visit our website at:
http://www.tycosecurityproducts.com/ELearning.aspx
We do not restrict this training material to internal use; you can freely review all courses you need.
You can select the courses in English, French, German or Spanish. Some courses will be available in English only.
Available are two types of documents:
- Instructional Material o In this section are available training modules that enable you to learn the
way to configure some specific features from the desired product.
- Fundamentals o In this section are available training modules that enable you to learn more
information about a specific domain like Access Control, CCTV or Information Technology (I.T.). Theses courses can be mandatory to learn prior to participate to some regular courses provided by TYCO Technical training department.
Fundamentals
Access Control
General Access Control Basics
CCTV
General CCTV Basics
Other
I.T. IT Basics (includes section on Intellex network connection options
Page 7
Instructional Material
Access Control
CCure 800 C•CURE 800 Manual Export/Import CCure 800 apC Configuration and upgrade CCure 800 NetVue video integration with Intellex CCure 800 After hours enabling CCure 800 CCTV Matrix Integration CCure 800 Central Monitoring Station CCure 800 Double Swipe CCure 800 Elevator control CCure 800 C•CURE 800 Hardware Activation Menu Guide
CCure 9000 C•CURE 9000 iSTAR eX Encryption
Kantech EntraPass Video integration with Intellex Kantech Kantech IPLink and KT400 Configuration Kantech Oracle/SQL migration Kantech Import/Export Card Database with Excel Kantech EntraPass installation Kantech Additional components installation Kantech KT100/300 configuration Kantech EntraPass Webstation Kantech Video Vault and Trigger Kantech EntraPass Alarms and Options Kantech EntraPass SmartLink Task Builder Kantech EntraPass Reports Kantech EntraPass Operators Configurations
CCTV
AD Introduction American Dynamics SpeedDomes AD MegaPower LT AD Re-fitting UltraDome lens covers AD Using HyperTerminal to test TouchTracker 16
e 8 EN SP
CCTV Basics
Pre-requisites:
NA
Audience:
This course is designed for new or existing engineers and teaches the skills required to
understand the fundamentals of CCTV.
Topics:
• Video Basics • Cameras • Lenses • Installation • Monitor • Multi Screen • Matrix System • Digital Video
Certification: NA
Comment:
Number of Participants: NA
Course Code: NA
Duration: NA
Objectives: The purpose of this Course is
to provide the Service /
Installer Engineer with easy to
read tool about definitions
that composed a normal CCTV
system.
Page 9 EN GE
Z
SP
Access Control Basics
Pre-requisites:
NA
Audience:
This course is designed for new or existing engineers and teaches the skills required to
understand the fundamentals of Access Control.
Topics:
• Describe the common methods of Access Control identification • List the types of cards technologies • Describe the various card formats that are in common use today • Describe inputs, outputs and readers and how they are used • Describe the basic architecture of an Access Control System • Describe the common access control door scenarios and the tradeoffs between them • Describe how alarms are monitored and responded to • Basic information about communication Protocols
Certification: NA
Comment:
Number of Participants: NA
Course Code: NA
Duration: NA
Objectives: The purpose of this Course is
to provide the Service /
Installer Engineer with easy to
read tool about definitions
that composed a normal
Access Control system.
Page 10 EN GE
Z
SP FR IT
IT Basics
Pre-requisites:
NA
Audience:
This course is designed for new or existing engineers and teaches the skills required to
understand the fundamentals of IT and basic Networking.
Topics:
• Know what a computer Network is. • Know what a Network Device is. • Know what a Network Address or IP address is. • What about every previous concepts working together and more? • Troubleshooting
Certification: NA
Comment:
Number of Participants: NA
Course Code: NA
Duration: NA
Objectives: This is a technical course
designed to cover the
fundamentals of IT and basic
Networking.
Page 11
Access Control
Access control products range includes:
Software House C•CURE 800/8000 & C•CURE 9000
Kantech Entrapass & Intevo.
C•CURE 800/8000 and C•CURE 9000 are part of the certification program.
To be able to participate to the various courses provided by the Training team the participant must
have the pre-requisites for the desired course that includes participate to the previous level course.
Here is the logical process to participate to the courses:
For Integrators and Installers:
For End users:
Access Basics (online training)
Kantech Level 1
Kantech Entrapass Level 2
Kantech Intevo
Software House C•CURE 800/8000
Level 1
Software House C•CURE 800/8000
Level 2
Software House C•CURE 9000 Level 1
Software House C•CURE 9000 Level 2
Software House C•CURE 9000 Level 3
Stratus Technologies
Software House C•CURE 9000 Level 4
Entreprise Architecture
C•CURE 800/8000 System Operator
C•CURE 800/8000 System Manager
C•CURE 9000 System Operator
C•CURE 9000 System Manager
Page 12 GE
Z
SP EN IT
Kantech Level 1
Pre-requisites:
An understanding of Windows XP/7/2003/2008R2 Operating Systems and their file structures commensurate with accreditation standards. An understanding of Windows Networking using TCP/IP, their terminology, parameters and connection implications. An understanding of basic Access Control. A background with handling low voltage electronic devices. A+ or N+ or similar Certifications are highly recommended.
Audience:
This course is designed for field installation / service technicians.
Topics:
• Introduction to EntraPass System • Software Installation & registration of the software • Hardware (all Controllers connection, RS232 & RS 485 protocols) • Configuration (KT300 & KT400, Doors, Inputs, Relays, Access Levels, Schedules &
cards) • Firmware Upgrade • TCP/IP Connection (KT400 IP and Lantronix connection) • Controller expansion Modules (KT300 Combs & KT400 Expansion modules) • KTNCC • Maintenance
Certification: EntraPass Level 1
Comment:
Number of Participants: Minimum 4, Maximum 8.
Course Code: Kan_EP_L1
Duration: 3 days
Objectives: This course is designed for the
delegate to understand Kantech
EntraPass Global Edition access
control software and the KT-
300/KT-100/KT-400 controller’s.
Page 13 GE
Z
SP EN IT
Kantech Entrapass Level 2
Pre-requisites:
Successful completion of the Kantech EntraPass Level 1 or prior Kantech courses or extensive experience with the Software. An understanding of Windows XP/7/2003/2008R2 Operating Systems and their file structures commensurate with accreditation standards. An understanding of Windows Networking using TCP/IP, their terminology, parameters and connection implications. An deep understanding of Access Control. A background with handling low voltage electronic devices. It is recommended to have experience on other electronic security systems like Intruder and CCTV. A+ or N+ or similar Certifications are highly recommended.
Audience:
This course is designed for field installation/ service technicians and integrators.
Topics:
• Users Menu (Access Levels, Schedules, Card Types, Import/Export, etc...) • Events (Smart Link Setup, Events as Alarms, Event Relay) • Video Integration • Graphics • DLL Intrusion Integration • Advanced Operators and their Privileges • Areas • WebStation • Reports
Certification: EntraPass Level 2
Comment:
Number of Participants: Minimum 4, Maximum 8.
Course Code: Kan_EP_L2
Duration: 2 days
Objectives: This course is designed for the
delegate to understand the
Advanced features of the
Kantech EntraPass Global
Edition access control software.
Page 14 GE
Z
SP EN IT
Kantech Intevo
Pre-requisites:
Successfully completion of a Kantech Level 1 course. An understanding of Windows XP/7/2003/2008R2 Operating Systems and their file structures commensurate with accreditation standards. An understanding of Windows Networking using TCP/IP, their terminology, parameters and connection implications. An understanding of basic Access Control and CCTV with IP cameras. A background with handling low voltage electronic devices. A+ or N+ or similar Certifications are highly recommended.
Audience:
This course is designed for field installation/ service technicians.
Topics:
• Introduction to the INTEVO system • Installation • First Boot Wizard • INTEVO System Configuration • IP Video Setup • EntraPass Go overview • Maintenance • Recovery
Certification: EntraPass Level 1
Comment:
Number of Participants: Minimum 4, Maximum 8.
Course Code: Kan_Int_En
Duration: 1 day
Objectives: This course is designed for the
delegate to understand,
commission and troubleshoot
the hardware and software
from the Kantech INTEVO
integrated security platform.
Page 15 EN IT FR
C•CURE800 / 8000 System Operator
Pre-requisites:
No prior knowledge of CCURE is required.
Attendees must be computer literate.
An understanding of the basic concepts of Access Control is an advantage
Audience:
This course is designed for new or existing CCURE users and teaches the skills required to
operate and maintain a C·CURE 800 access control system
Topics:
• Overview C•CURE 800/8000 • Administration & monitoring clients • Cardholder Database • Doors & Access (door configuration, clearances, Time Specifications & groups) • Access Control Events • Monitoring System Activity • CCURE ID : Cards and Badge Design • Reports and Journal • Backup
Certification: NA
Comment:
Number of Participants: Maximum 4
Course Code: SWH_CC8_Ops
Duration: 2 days
Objectives: This is a user course, designed
to cover most topics relating to
system operation and basic
administration of the C•CURE
800 access control system.
Page 16 EN
Z
IT FR
C•CURE800 / 8000 System Manager
Pre-requisites:
No prior knowledge of CCURE is required.
Attendees must be computer literate.
An understanding of the basic concepts of Access Control is an advantage
Audience:
This course is designed for new or existing CCURE users and teaches the skills required to
operate and maintain a C·CURE 800 access control system.
Topics:
• Overview C•CURE 800/8000, Administration & monitoring clients • Hardware (Readers, Inputs & Outputs) • Basic Access Components (Doors, Groups, Time Spec, Clearances & Holidays) • Cardholder Database • Personnel View & Screen color setup • CCURE ID : Cards and Badge Design • Maps, Access Control Events, Email & more. • Reports and Journal • Areas (Enhanced APB, Roll Call Report, Occupancy, Escorting & Supervision,
Mustering/Demustering, Pass Thru & Area Lockout) • Intrusion Zones • NetVue • Manual & automatic Import/Export of Cardholders Database • Backup, Journal maintenance, Prior journals & Restore Journals
Certification: NA
Comment:
Number of Participants: Maximum 4
Course Code: SWH_CC8_SM
Duration: 4 days
Objectives: This is a user course, designed
to cover most topics relating to
system operation and basic
administration of the C•CURE
800 access control system.
Page 17 EN GE
Z
SP FR IT
C•CURE9000 System Operator
Pre-requisites:
No prior knowledge of CCURE is required.
Attendees must be computer literate.
An understanding of the basic concepts of Access Control is an advantage
Audience:
This course is designed for new or existing CCURE users and teaches the skills required to
operate and maintain a C·CURE 9000 access control system
Topics:
• Overview C•CURE 9000 • Administration & monitoring clients • Cardholder Database(Add/Edit CardHolders, Using Query to search the database,
Users & their privileges) • Access (Creating Clearances) • Access Control Events • Monitoring System Activity • CCURE ID (Setting up a photo badging station, Badge Design and badge Printing) • Reports and Journal • Backup
Certification: NA
Comment:
Number of Participants: Maximum 4
Course Code: SWH_CC9_Ops
Duration: 2 days
Objectives: This is a user course, designed
to cover most topics relating to
system operation and basic
administration of the C•CURE
9000 access control system.
Page 18 EN GE
Z
SP FR IT
C•CURE9000 System Manager
Pre-requisites:
No prior knowledge of CCURE is required.
Attendees must be computer literate.
An understanding of the basic concepts of Access Control is an advantage
Audience:
This course is designed for new or existing CCURE users and teaches the skills required to
operate and maintain a C·CURE 9000 access control system
Topics:
• Overview C•CURE 9000, Administration & monitoring clients • Hardware (Readers, Inputs & Outputs) • Basic Access Components (Doors, Groups, Schedules, Clearances & Holidays) • Cardholder Database, Personnel View, Application Layout • CCURE ID : Cards and Badge Design • Maps, Access Control Events, Email & more. • Reports and Journal • Areas (Enhanced APB, Roll Call Report, Occupancy, Escorting & Supervision,
Mustering/Demustering, Pass Thru & Area Lockout) • Intrusion Zones • NetVue • Manual & automatic Import/Export of Cardholders Database • Backup, Journal maintenance, Prior journals & Restore Journals
Certification: NA
Comment:
Number of Participants: Maximum 4
Course Code: SWH_CC9_SM
Duration: 4 days
Objectives: This is a user course, designed
to cover most topics relating to
system operation and basic
administration of the C•CURE
9000 access control system.
Page 19 EN GE
Z
SP FR IT
C•CURE800 / 8000 Level 1
Pre-requisites:
• An understanding of Windows XP/7/2003/2008R2 Operating Systems and their file structures commensurate with accreditation standards.
• An understanding of Windows Networking using TCP/IP, their terminology, parameters and connection implications.
• An understanding of basic Access Control (passing a WEB based training is necessary).
• A background with handling low voltage electronic devices. • A+ or N+ or similar Certifications are highly recommended.
Audience:
This course is designed for field installation/service Technicians
Topics:
• Overview: C•CURE 800/8000, System Architecture, Hardware, Administration & monitoring clients
• Installation & registration of the software • Installing and programming controllers (iSTAR Pro & Edge) • Software Configuration (Inputs, outputs, readers, doors, card format, Time Specs,
Holidays, Clearances, Card Holders) • Personnel (Records, User & Privileges, personnel View, CCURE ID, Manual import) • Maps, Events, Custom Clearances • Reports & Journal • Backup & Restore, Upgrade & maintenance.
Certification: C•CURE 800 Level 1
Comment: With Successful completion of this course the participant is able to attend the
C•CURE 800 Level 2 course
Number of Participants: Minimum 4, Maximum 8
Course Code: SWH_CC8_L1
Duration: 3 days
Objectives: This course is designed for the
delegate to understand C•CURE
800/8000 access control system
and the Controllers and readers
Hardware including their
installation & configuration.
Page 20 EN GE
Z
SP FR IT
C•CURE800 / 8000 Level 2
Pre-requisites:
• Successful completion of the C•CURE 800 Level 1 course. • An understanding of Windows XP/7/2003/2008R2 Operating Systems and their file
structures commensurate with accreditation standards. • An understanding of Windows Networking using TCP/IP, their terminology,
parameters and connection implications. • Practical experience with installing and configuring from C•CURE systems. • It is recommended to have experience on intrusion & CCTV security systems • A background with handling low voltage electronic devices. • A+ or N+ or similar Certifications are highly recommended.
Audience:
This course is designed for field installation/service Technicians & system integrators
Topics:
• Personnel topics (Personnel Views, UDF, Multiple cards, Pin Only, CHUID & ROTD) • Events advanced options (Complex and latching Events, Two phase
acknowledgement, Custom Clearances, Thread Levels & Clearance filters) • Areas (Enhanced APB, Roll Call Reports, Occupancy, Escorted Visitor Management,
Area Pass-through/Lockout/personnel group, Supervision, Mustering/Demustering) • iSTAR Keypad commands • iSTAR & apC Intrusion Zones • NetVue, Email/Paging • ODBC (Auto Import, View Database & configuration, Enhanced Reporting) • Advanced C•CURE ID
Certification: C•CURE 800 Level 2
Comment:
Number of Participants: Minimum 4, Maximum 8
Course Code: SWH_CC8_L2
Duration: 3 days
Objectives: This course is designed for the
delegate to understand C•CURE
800/8000 access control system
and the Controllers and readers
Hardware including their
installation & configuration.
Page 21 EN GE
Z
SP FR IT
C•CURE9000 Level 1
Pre-requisites:
• An understanding of Windows XP/7/2003/2008R2 Operating Systems and their file structures commensurate with accreditation standards.
• An understanding of Windows Networking using TCP/IP, their terminology, parameters and connection implications.
• An understanding of basic Access Control. • A background with handling low voltage electronic devices. • A+ or N+ or similar Certifications are highly recommended. • SQL Database knowledge is recommended
Audience:
This course is designed for field installation/service Technicians
Topics:
• Overview: C•CURE 9000, System Architecture, Hardware, Administration & monitoring clients
• Installation & registration of the software • Installing and programming controllers (iSTAR Pro & Edge) • Software Configuration (Inputs, outputs, readers, doors, card format, Schedules,
Holidays, Clearances, Card Holders, Areas & zones basic) • Import/Export (manual) • Personnel (Records, Operators & Privileges, CCURE ID, Monitoring station Layouts) • Maps, Events, System Variables • Reports, Audit & Journal • Backup & Restore, Maintenance & Site Server
Certification: C•CURE 9000 Level 1
Comment: With Successful completion of this course the participant is able to attend the
C•CURE 9000 Level 2, Level 3 or Level 4 Courses
Number of Participants: Minimum 4, Maximum 8
Course Code: SWH_CC9_L1
Duration: 4 days
Objectives: This course is designed for the
delegate to understand C•CURE
9000 access control system and
the Controllers and readers
Hardware including their
installation & configuration.
Page 22 EN GE
Z
SP FR IT
C•CURE9000 Level 2
Pre-requisites:
• Successful completion of the C•CURE 9000 Level 1 course. • An understanding of Windows XP/7/2003/2008R2 Operating Systems and their file
structures commensurate with accreditation standards. • An understanding of Windows Networking using TCP/IP, their terminology,
parameters and connection implications. • An understanding of basic Access Control (passing a WEB based training is
necessary). • SQL Database knowledge is recommended.
Audience:
This course is designed for field installation/service Technicians and system integrators.
Topics:
• Personnel topics (Personnel Views, User Defined Fields) • Events advanced options (Complex Events, Priority Level, Predefined Log Messages &
Events Assessments) • Areas (APB, Roll Call Reports, Occupancy, Escorted Visitor Management, Area
Lockout, Supervision, Mustering/De-mustering areas) • iSTAR Keypad commands & iSTAR Intrusion Zones • Video Integration (Intellex, VideoEdge NVR, HDVR & Axis Cameras) • Import/Export (Auto Import, Import Watcher, ODBC) • Web Client, BiDi General Interface • Third Party Integration (DSC, Galaxy & MZX) • C•CURE Integration to Victor Unified Client
Certification: C•CURE 9000 Level 2
Comment: With Successful completion of this course the participant is able to attend the
C•CURE 9000 Level 3 & Level 4 Courses
Number of Participants: Minimum 4, Maximum 8
Course Code: SWH_CC9_L2
Duration: 4 days
Objectives: This course is designed for the
delegate to understand and
configure the advanced features
available in the C•CURE 9000
access control software.
Page 23 EN
C•CURE9000 Level 3 (Redundancy with everRun)
Pre-requisites:
• Successful completion of the C•CURE 9000 Level 1 course
• Working Knowledge of:
o Intel Server Terminology & configuration
o Storage terminology & configuration (Raid)
o LAN (Ethernet) terminology and IP configuration
o Microsoft Windows Server 2003 & 2008/R2 systems
o Linux (UNIX)
Audience:
This course is designed for system administrators, IT managers, Customers and partners
in charge of the C·CURE 9000 and everRun solutions maintenance
Topics:
• Introduction & Functional Overview • Installation of Citrix XenServer • Configuring a Virtual Machine • Install C•CURE 9000 • Installation of everRun solution • Using everRun Availability Manager • Protect and Unprotect • Failover situations
Certification: C•CURE 9000 Redundancy with everRun
Comment: With Successful completion of this course the participant is able to attend the
C•CURE Level 4 Course. This course will be delivered in English Language only!
Number of Participants: Minimum 2, Maximum 4
Course Code: SWH_CC9_M_En
Duration: 2 days
Objectives: This practical two days program
covers installation and
configuration of CCURE 9000
with stratus Technologies
everRun Redundancy solutions.
Page 24 EN
C•CURE9000 Level 4 (Enterprise Solution)
Pre-requisites:
• At least Successful completion of the C•CURE 9000 Level 1 course. • Practical experience with C•CURE 9000 installation & configuration is mandatory. • An understanding of Windows XP/7/2003/2008R2 Operating Systems and their file
structures commensurate with accreditation standards. • An understanding of Windows Networking using TCP/IP, their terminology,
parameters and connection implications. • Microsoft Networking Essentials or equivalent • Microsoft Windows 2003/2008/R2 server or equivalent
Audience:
The Enterprise Architecture – Application Servers course is intended for technician
partners who will design, install, configure & maintain Enterprise Architecture
(Application Servers) on the end-user security system.
Topics:
• Theory of operation of a MAS/SAS Enterprise System • Preparing MAS/SAS server for installation • Installing SQL Server 2008 R2 64 Bit on a MAS Server • Installing CCURE 9000 MAS System • Installing CCURE 9000 SAS System with SQL Server 2008 Express included • Configuration and Operation of MAS and SAS • Synchronisation and solving Synchronisation conflicts • Upgrading a CCURE 9000 Standalone System to a SAS system • Licensing
Certification: C•CURE 9000 Enterprise Architecture
Comment: This course will be delivered in English Language only!
Number of Participants: Minimum 2, Maximum 4
Course Code: SWH_CC9_EP
Duration: 2 days
Objectives: This course is designed for the
delegate to understand C•CURE
9000 Enterprise Architecture &
to install & configure the Master
Application Server (MAS) & Site
Application Server (SAS)..
Page 25
Page 26
CCTV CCTV Products Range includes:
American Dynamics: Matrixes systems (MPLT, MP48+ & MP3200), Analogue DVRs
(ADTVR, Intellex/Network client), Hybrid DVRs ( VideoEdge Hybrid, HDVR) and
Network Video Recorders ( VideoEdge NVR / Victor).
Exacq: Exacq Vision Hardware and software.
To be able to participate to the various courses provided by the Training team the participant must
have the pre-requisites for the desired course that includes participate to the previous level course.
Here is the logical process to participate to the Matrixes and DVR/ NVR courses:
CCTV Basics (Online
Training)
Analogue Matrixes Courses
MPLT
MP48+
MP3200
Analogue DVRs Courses
Intellex Basic
Intellex Advanced
ADTVR
Hybrid DVRs Courses
VideoEdge Hybrid
HDVR Exacq Vision
Network Video Management
Courses
VideoEdge Level 1
VideoEdge Level 2
Page 27 EN GE
Z
SP FR IT
MPLT
Pre-requisites:
• An understanding of CCTV Basics and Video
• A background with handling low voltage electronic devices
• Familiarity with the various Windows OS would be an advantage
Audience:
This course is designed for field installation/ service technicians
Topics:
• Overview MPLT Feature and Product codes • Hardware Connection (Video In- and Outputs, RS232 Connections with keyboards, RS485
Connections with keyboards, Sensornet and UTC, Multiple Matrix systems) • Preparing Keyboards (AD2088, ADTTe, ADCC1100, ADCC0300, ADCC0200 in RS232 mode,
ADCC0200 and ADCC0300 in RS485 mode) • Basic Programming (Date / Time, Camera Title/Control protocol, PIN and Password
recovery, Monitor) • Advanced Programming (Partitioning, Programming and running Presets and Patterns,
Views, Tour, Alarms, System Options, Keyboard Priorities, Save and Restore User Configurations, Restore Factory Default, Ping)
• ACCESS SDU Configuration menu • Special configuration menu, ACCESS the Matrix menu, Backup with Easy LT,
Firmware Upgrade, Multi Matrix Mode
Certification: NA
Comment:
Number of Participants: Minimum 4, maximum 8 (10 Echt Training centre only)
Course Code: AD_MPLT
Duration: 2 days
Objectives: This course is designed to
enable the delegate to be able
to install, commission and
trouble-shoot the MPLT Matrix
system.
Page 28 FR
Z
SP EN IT
MP48+
Pre-requisites:
• An understanding of Windows XP/7//2003/2008R2 Operating Systems and their file structures commensurate with accreditation standards.
• An understanding of Windows Networking using TCP/IP, their terminology, parameters and connection implications.
• An understanding of basic CCTV and Video. • A background with handling low voltage electronic devices
Audience:
This course is designed for field installation/ service technicians
Topics:
• MP48 Plus Hardware Installation & Connections • Multi Matrix System Architecture. • Network Configuration. • Installation Easy48 Software • Programming basic functions with the Easy48 Software and with the matrix menu
(Date/Time, Options, Ports, Camera, Camera Title, Pseudo Number, User/Keyboard privileges)
• Programming advanced functions with the Easy48 Software and with the matrix menu (Salvos, Tour, Event Timer, Alarm Programming with Email notification)
• Monitor & Camera state • Dome Utility (Firmware upgrade for AD Domes) • Programming from Macros • Firmware upgrade
Certification: NA
Comment:
Number of Participants: Minimum 4, maximum 8
Course Code: AD_MP48Plus
Duration: 2 days
Objectives: This course is designed to
enable the delegate to be able
to install, commission and
trouble-shoot the MP48+ Matrix
system.
Page 29 EN GE
Z
SP FR IT
MP3200
Pre-requisites:
• An understanding of Windows XP/7//2003/2008R2 Operating Systems and their file structures commensurate with accreditation standards.
• An understanding of Windows Networking using TCP/IP, their terminology, parameters and connection implications.
• An understanding of basic CCTV and Video. • A background with handling low voltage electronic devices.
Audience:
This course is designed for field installation / service technicians.
Topics:
• Overview to the American Dynamics Keyboards, Accessories and their connection to the matrix.
• Overview of MP3200 Hardware • System architecture for multi Bay systems • Dip switch setup for VIM, VOM and DB/DVBL • Programming network settings of MP3200 CPU with LCD setup • Installation and programming basic functions with easy CPU software • Programming advanced functions with easy CPU • Working with snapshots • Firmware upgrade • Installation and configuring from satellite systems.
Certification: NA
Comment:
Number of Participants: Minimum 3, Maximum 6
Course Code: AD_MP3200
Duration: 2 days
Objectives: This course is designed for
delegate to be able to install,
commission and trouble-shoot
the MP3200 matrix system.
Page 30 IT EN
SensorRail 4
Pre-requisites:
• An deep understanding of CCTV Basics and Video
• A background with handling low voltage electronic devices
• Familiarity with the various Windows OS would be an advantage
Audience:
This course is designed for installation / Service Technicians.
Topics:
• Product Description • SensorRail 4 Parts • Pre-requisites for the Installation • Parts supplied and parts to be purchased • SensorRail 4 Installation
o Rail section installation, Anti Swing cables installation, Copper tubes installation, First Power up and Trolley configuration, Notes about the trolley control, Cowling Installation.
• SensorRail 4 Maintenance • Trolley CPU Firmware Upgrade
Certification: NA
Comment:
Number of Participants: Minimum 4, Maximum 8
Course Code: AD_SR4
Duration: 1 day
Objectives: This course is designed for the
delegate to be able to install a
SensorRail 4 system and
configure it to be controlled by
any compatible American
Dynamics System.
Page 31 EN GE
Z
SP FR IT
Intellex & Network Client Basic
Pre-requisites:
• An understanding of Windows XP/7/2003/2008R2 Operating systems, their file
structures commensurate with accreditation standards, of Windows networking
using TCP/IP, their terminology, parameters and connection implications, of basic
CCTV and Video.
• A background with handling low voltage electronics devices.
• A+ or N+ or similar certifications are highly recommended
Audience:
This course is designed for installation / Service Technicians.
Topics:
• Intellex Overview: General Intellex features, models and numbering. • Intellex basic configuration: Camera name, termination, gain adjustement, record
mode, rate setup, schedules, Intellex cord filters, alarm and security. • Playback functions, covert camera mode, camera control. • Configuring Date & Time, Storage, Ports. • Installing and working with Network Client: Setup Instruments, Live Video
configuration, Multiple live screens, Download from video & alarms, Export, using playback from exported clips & Search.
Certification: NA
Comment: With Successful completion of this course the participant is able to attend the
Intellex Advanced Course (ITXADVANCED)
Number of Participants: Minimum 4, Maximum 8 (10 for Echt Training center only)
Course Code: AD_ITX_Bas
Duration: 2 days
Objectives: This course is designed for the
delegate to understand both
Intellex and Network Client in
it’s basic functionality and will
teach the basic configuration of
both.
Page 32 EN GE
Z
SP FR IT
Intellex & Network Client Advanced
Pre-requisites:
• Successfully completion from Intellex Basic Course (ITXBASIC) or older version of
Intellex trainings with a deep experience.
• An understanding of Windows XP/7/2003/2008R2 Operating systems, their file
structures commensurate with accreditation standards, of Windows networking
using TCP/IP, their terminology, parameters and connection implications, of basic
CCTV and Video.
• A background with handling low voltage electronics devices.
• A+ or N+ or similar certifications are highly recommended
Audience:
This course is designed for installation / Service Technicians.
Topics:
• Intellex Overview: Intellex and Network Client History. • Intellex Advanced configuration: Camera Control, PTZ – Triggering, Text Recording,
Audio recording and Audio on live, Activity Log, Parallel Port Events, Email Notification, S.M.A.R.T (Self Monitoring Analysis and Reporting Tool), Storage, Archive.
• Advanced Network Client features: Incident data bases, Scheduled Downloads, Export to file, CD/DVD, AVI, Event Notification, Security, Multiple Live Screens and working with user profiles, Virtual Matrix, Video Verification
• Troubleshoot and Repair.
Certification: NA
Comment: With successful completion of this course the participant is able to attend the
Intellex Policy Manager (ITXPM) and Archive Manager (ITXAM) Course.
Number of Participants: Minimum 4, Maximum 8 (10 for Echt Training center only)
Course Code: AD_ITX_Adv
Duration: 2 days
Objectives: This course is designed for the
delegate to understand both
Intellex and Network Client in
it’s Advanced functionality, as
well as, teach troubleshooting
and repair, plus new features.
Page 33 FR
Z
IT EN GE
Hybrid DVR (HDVR)
Pre-requisites:
• An understanding of Windows XP/7/2003/2008R2 Operating Systems and their file structures commensurate with accreditation standards.
• An understanding of Windows Networking using TCP/IP, their terminology, parameters and connection implications.
• An understanding of basic CCTV and Video. • An understanding of basic IP cameras and encoders • A background with handling low voltage electronic devices • A+ or N+ or similar Certifications are highly recommended
Audience:
This course is designed for installation / Service Technicians.
Topics:
• General features, models, connections • Adding IP cameras, configuring IP and analogue cameras • Configuring storage • Live operating, Export, Playback • Configuring Events, Event monitoring • Users and Privileges • Camera control.
Certification: NA
Comment: The training does not cover IP camera installation and configuration. On non TSP training locations, the student needs to use their own Laptop/PC for installing the HDVR client (requires Professional OS with administrative privileges).
Number of Participants: Minimum 2, Maximum 8
Course Code: AD_HDVR
Duration: 2 days
Objectives: This course is designed for the
delegate to understand HDVR
in its basic functionality,
configuration and
troubleshooting.
Page 34 EN GE
Z
SP FR IT
VideoEdgeTM Hybrid Applicance
Pre-requisites:
• An understanding of Windows XP/7/2003/2008R2 Operating Systems and their file structures commensurate with accreditation standards.
• An understanding of Windows Networking using TCP/IP, their terminology, parameters and connection implications.
• An understanding of basic CCTV and IP Video. • A background with handling low voltage electronic devices. • A+ or N+ or similar Certifications are highly recommended
Audience:
This course is designed for installation / Service Technicians.
Topics:
• Overview VideoEdgeTM Hybrid Appliance • Illustra IP Cameras installation and configuration • Configure VideoEdgeTM Hybrid • Configuring and operating with VideoEdge local Client • Dome Control / ADTTE Keyboard • Text Recording (POS) • Victor Express • Recovery of the unit
Certification: VideoEdge Hybrid Appliance
Comment:
Number of Participants: Minimum 4, Maximum 8
Course Code: AD_VE_HA_En
Duration: 2 days
Objectives: This course is designed for the
delegate to be able to install,
commission and troubleshoot a
VideoEdge Hybrid Appliance
unit and VideoEdge Local Client
Software.
Page 35 EN GE
Z
SP FR IT
AD VideoEdgeTM Level 1 (NVR & Victor)
Pre-requisites:
• An understanding of Windows XP/7/2003/2008R2 Operating Systems and their file structures commensurate with accreditation standards.
• An understanding of Windows Networking using TCP/IP, their terminology, parameters and connection implications.
• An understanding of basic CCTV and Video. • A background with handling low voltage electronic devices. • A+ or N+ or similar Certifications are highly recommended
Audience:
This course is designed for installation / Service Technicians.
Topics:
• Overview VideoEdgeTM NVR Server • Designing and Calculation from a project, including Storage • Illustra Camera Range • Configure VideoEdgeTM NVR Server and Hybrid • Victor Site Manager, Victor Client Professional and Victor Express • Licensing and Software Registration • Restore and Upgrades
Certification: VideoEdge Level 1
Comment:
Number of Participants: Minimum 4, Maximum 6
Course Code: AD_VEL1
Duration: 3 days
Objectives: This course is designed for the
delegate to be able to install,
commission and troubleshoot a
VideoEdge NVR server, Victor
Site Manager and Victor Client.
Page 36 EN GE
Z
SP FR IT
AD VideoEdgeTM Level 2 (NVR & Victor)
Pre-requisites:
• Successfull completion of either the VideoEdge TM Hybrid or the VideoEdge TM NVR level 1 course.
Audience:
This course is designed for installation / Service Technicians.
Topics:
• VideoEdge TM software Only Install • NVR Archiving • N VR Failover • POS Integration on Victor • Virtual Matrix and Keyboards • Video Analytics • Third Party Integrations • Video Wall • Victor DB Backup and restore
Certification: VideoEdge Level 2
Comment:
Number of Participants: Minimum 4, Maximum 6
Course Code: AD_VEL2
Duration: 2 days
Objectives: This course is designed for the
delegate that attended to Level
1 or Hybrid course and it covers
advanced features for both
VideoEdgeTM NVR server and for
Victor Unified Client.
Page 37 EN GE
Z
SP FR IT
Exacq Vision
Pre-requisites:
• An understanding of Windows XP/7/2003/2008R2 Operating Systems. Understanding of Linux is also recommended.
• An understanding of Windows Networking using TCP/IP, their terminology, parameters and connection implications.
• An understanding of basic IP cameras and encoders. • An understanding of basic CCTV and Video. • A background with handling low voltage electronic devices. • A+ or N+ or similar Certifications are highly recommended
Audience:
This course is designed for installation / Service Technicians.
Topics:
• Software and hardware overview • Installing the Excaq Vision Client • Camera Setup • Storage Setup • Live Video, export and playback • Configuring events, event monitoring • Mobile maps • Users
Certification: Exacq Vision
Comment:
Number of Participants: Minimum 4, Maximum 6
Course Code: Ex_Vision_En
Duration: 2 days
Objectives: This course is designed for the
delegate to understand Exacq
Vision software and hardware
platforms.
Page 38
Page 39
INTRUSION Intrusion Products Range includes:
DSC: SWC9045, Power 1864, ALEXOR, IMPASSA, Power Neo and Sur-gard System III.
Visonic: MSP-5 Panel, PowerMaster, PowerMax Express, PowerMax & Power
Manage.
Bentel: Absoluta.
To be able to participate to the various courses provided by the Training team the participant must
have the pre-requisites for the desired course that can includes participate to the previous level
course.
Here is the logical process to participate to the Intrusion Courses:
Intrusion DSC
SWC9045 Power 1864 DSC ALEXOR DSC IMPASSA DSC Power
Neo DSC Sur-Gard
System III
Intrusion Visonic
Visonic MSP-5 Panel
Visonic PowerMax
Express
Visonic PowerMax Advanced
Visonic PowerMaster
Advanced
Visonic PowerManage
Intrusion Bentel
Bentel Absoluta
Page 40 EN
DSC 9045-47
Pre-requisites:
• Understanding of basic Intruder concepts • An understanding of Windows XP/7 Operating Systems and their file structures
commensurate with accreditation standards. • An understanding of Windows Networking using TCP/IP, their terminology,
parameters and connection implications. • A background with handling low voltage electronic devices • A+ or N+ or similar Certifications are highly recommended
Audience:
Technicians wishing to Install and Program a DSC9045/47 Alarm System.
Topics:
• 9045/47 Panel Overview • 9045/47 Terminals Description and connections • Keypad [*] Commands • Wireless Devices enrolment • Panel Programming
o Zones o Partitions o PGM o Communication Options, etc.
• 9047 Audio Options • DLS IV Configuration Software.
Certification: NA
Comment: One more day could be required if the student has a lack of knowledge in the
intrusion domain or if student want to more information’s about advanced features.
Number of Participants: Minimum 4, Maximum 8
Course Code: DSC_9045
Duration: 1 day
Objectives: This practical one day course
covers the fundamentals of the
DSC 9045/47 Wireless Alarm
System. All Students will have
access to a panel, keypad and
detectors and will each be
required to program a panel.
Page 41 SP EN
DSC Power 1864
Pre-requisites:
• Understanding of basic Intruder concepts • An understanding of Windows XP/7 Operating Systems and their file structures
commensurate with accreditation standards. • An understanding of Windows Networking using TCP/IP, their terminology,
parameters and connection implications. • A background with handling low voltage electronic devices • A+ or N+ or similar Certifications are highly recommended
Audience:
Technicians wishing to Install and Program a DSC PowerSeries Alarm System.
Topics:
• PowerSeries Panel Overview • PowerSeries Terminals Description and connections • Keypad Commands • Main Panel Programming
o Zones, Partitions, PGM, Communication Options, etc. • Wireless Receivers and devices programming • PowerSeries Combus module • GPRS and Ethernet Communicators
o GS2065 & TL265GS • DLS IV Configuration Software.
Certification: NA
Comment: One more day could be required if the student has a lack of knowledge in the
intrusion domain or if student want to more information’s about advanced features.
Number of Participants: Minimum 4, Maximum 8
Course Code: DSC_P_1864
Duration: 1 day
Objectives: This practical one day course
covers the fundamentals of the
DSC PowerSeries Alarm System.
All Students will have access to
a panel, keypad and detectors
and will each be required to
program a panel
Page 42 EN
DSC Alexor
Pre-requisites:
• Understanding of basic Intruder concepts • An understanding of Windows XP/7 Operating Systems and their file structures
commensurate with accreditation standards. • An understanding of Windows Networking using TCP/IP, their terminology,
parameters and connection implications. • A background with handling low voltage electronic devices • A+ or N+ or similar Certifications are highly recommended
Audience:
Technicians wishing to Install and Program a DSC Alexor Alarm System.
Topics:
• Alexor Panel Overview • Alexor Terminals Description and connections • Keypad [*] Commands • Wireless Devices enrolment • Panel Programming
o Zones o Partitions o PGM o Communication Options, etc.
• GPRS and Ethernet Communicators • DLS IV Configuration Software.
Certification: NA
Comment: One more day could be required if the student has a lack of knowledge in the
intrusion domain or if student want to more information’s about advanced features.
Number of Participants: Minimum 4, Maximum 8
Course Code: DSC_ALEX
Duration: 1 day
Objectives: This practical one day course
covers the fundamentals of the
DSC Alexor Wireless Alarm
System. All Students will have
access to a panel, keypad and
detectors and will each be
required to program a panel.
Page 43 EN
DSC Impassa
Pre-requisites:
• Understanding of basic Intruder concepts • An understanding of Windows XP/7 Operating Systems and their file structures
commensurate with accreditation standards. • An understanding of Windows Networking using TCP/IP, their terminology,
parameters and connection implications. • A background with handling low voltage electronic devices • A+ or N+ or similar Certifications are highly recommended
Audience:
Technicians wishing to Install and Program a DSC Impassa Alarm System.
Topics:
• Impassa Panel Overview • Impassa Terminals Description and connections • Keypad [*] Commands • Wireless Devices enrolment • Panel Programming
o Zones, Partitions, PGM, Communication Options, etc. • GPRS and Ethernet Communicators
o GS2065 & TL265GS • DLS IV Configuration Software.
Certification: NA
Comment: One more day could be required if the student has a lack of knowledge in the
intrusion domain or if student want to more information’s about advanced features.
Number of Participants: Minimum 4, Maximum 8
Course Code: DSC_IMPA
Duration: 1 day
Objectives: This practical one day course
covers the fundamentals of the
DSC Impassa Wireless Alarm
System. All Students will have
access to a panel, keypad and
detectors and will each be
required to program a panel
Page 44 EN
DSC PowerNeo
Pre-requisites:
• Understanding of basic Intruder concepts • An understanding of Windows XP/7 Operating Systems and their file structures
commensurate with accreditation standards. • An understanding of Windows Networking using TCP/IP, their terminology,
parameters and connection implications. • A background with handling low voltage electronic devices • A+ or N+ or similar Certifications are highly recommended
Audience:
Technicians wishing to Install and Program a DSC PowerNeo Alarm System.
Topics:
• PowerNeo Panel Overview • Power G Technology and devices • Panel Installation • Keypad Functions • Panel Programming • Corbus expansion Modules • Alternate Communicators • DLS V Software
Certification: NA
Comment: One more day could be required if the student has a lack of knowledge in the
intrusion domain or if student want to more information’s about advanced features.
Number of Participants: Minimum 4, Maximum 8
Course Code: DSC_PNEO
Duration: 2 days
Objectives: This practical 2 days course
covers the fundamentals of the
DSC Power Neo Alarm System.
All Students will have access to
a panel, keypad and detectors
and will each be required to
program a panel
Page 45 SP EN
DSC System III
Pre-requisites:
• Understanding of advanced Intruder concepts • Knowledge of Alarm Stations communication protocols like SIA and Contac ID. • Understanding of phone line systems. • An understanding of Windows XP/7 Operating Systems and their file structures
commensurate with accreditation standards. • An understanding of Windows Networking using TCP/IP, their terminology,
parameters and connection implications. • A background with handling low voltage electronic devices
Audience:
Distributors wishing to install, Program and maintain an alarm Central Station Receiver.
Topics:
• System III introduction and Features • Hardware Installation • Operation with default Programming • CPM3 Operation Modes and Programming • Console Software • Line cards Programming • Receiver Upgrade: Software and Cards • Troubleshooting
Certification: NA
Comment: One more day could be required if the student has a lack of knowledge in the
intrusion domain or if student want to more information’s about advanced features.
Number of Participants: Minimum 4, Maximum 8
Course Code: DSC_SGS3
Duration: 2 days
Objectives: This practical two days course
covers the installation and
programming of Surgard System
III receiver.
Page 46 SP EN
VISONIC MSP-5 Panel / SOS Kit
Pre-requisites:
• Understanding of basic Intruder concepts • A background with handling low voltage electronic devices
Audience:
Technicians wishing to Install and Program a Visonic MSP-5 Panel.
Topics:
• MSP-5 Panel kit overview • The PowerG technology overview • Panel Installation • Complete System Configuration • Panel Operation • Testing Alarms
Certification: NA
Comment: One more day could be required if the student has a lack of knowledge in the
intrusion domain or if student want to more information’s about advanced features.
Number of Participants: Minimum 4, Maximum 8
Course Code: VISONIC_MSP5
Duration: 1 day
Objectives: This practical one day course
covers the installation,
configuration and operation of
Visonic MSP-5 panel. All
students will have access to a
panel, detectors and each will
program a panel.
Page 47 EN
VISONIC Power Max Express
Pre-requisites:
• Understanding of basic Intruder concepts • A background with handling low voltage electronic devices
Audience:
Technicians wishing to Install and Program a Visonic Alarm System.
Topics:
• PowerMax Express Overview • PowerMax Express Installation • Compatible devices • PowerMax Express Programming • Panel Configuration • Panel Operation
Certification: NA
Comment: One more day could be required if the student has a lack of knowledge in the
intrusion domain or if student want to more information’s about advanced features.
Number of Participants: Minimum 4, Maximum 8
Course Code: VISONIC_PMax_Exp
Duration: 1 day
Objectives: This practical one day course
covers the fundamentals of the
Visonic Power Master Wireless
Alarm System. All Students will
have access to a panel, keypad
and detectors and will each be
required to program a panel
Page 48 SP EN
VISONIC Power Max Advanced
Pre-requisites:
• Understanding of basic Intruder concepts • A background with handling low voltage electronic devices
Audience:
Technicians wishing to Install and Program a Visonic Alarm System.
Topics:
• PowerMax Panels Overview • PowerMax Panels Installation • PowerCode technology • Compatible devices • PowerMax Programming • Panel Configuration • Panel Operation
Certification: NA
Comment: One more day could be required if the student has a lack of knowledge in the
intrusion domain or if student want to more information’s about advanced features.
Number of Participants: Minimum 4, Maximum 8
Course Code: VISONIC_PMAX
Duration: 1 day
Objectives: This practical one day course
covers the fundamentals of the
POWERMAX Wireless Alarm
System. All Students will have
access to a panel, keypad and
detectors and will each be
required to program a panel
Page 49 EN
Z
SP GE
VISONIC Power Master
Pre-requisites:
• Understanding of basic Intruder concepts • A background with handling low voltage electronic devices
Audience:
Technicians wishing to Install and Program a Visonic Alarm System.
Topics:
• PowerMaster Panels Overview • The PowerG technology • PowerMaster Panels Installation • Complete System Configuration • Panel Operation • Testing Alarms
Certification: NA
Comment: One more day could be required if the student has a lack of knowledge in the
intrusion domain or if student want to more information’s about advanced features.
Number of Participants: Minimum 4, Maximum 8
Course Code: VISONIC_PM10_30
Duration: 1 day
Objectives: This practical one day course
covers the fundamentals of the
Visonic Wireless Alarm System.
All Students will have access to
a panel, keypad and detectors
and will each be required to
program a panel
Page 50 EN
VISONIC PowerManage
Pre-requisites:
• Understanding of Windows and Linux Operating Systems • Understanding of basic Intruder concepts • Deep Knowledge on Central Alarms Receivers • Knowledge on Automation Software
Audience:
This course is designed for Central Monitoring Administrators and Visonic PowerManage
Distributors.
Topics:
• PowerManage Overview • Installing the PowerManage Software • PowerManage Setup • The Web Interface • Connecting a panel and Event Reception • Visonic Interactive
Certification: NA
Comment:
Number of Participants: Minimum 4, Maximum 8
Course Code: VISONIC_PM
Duration: 1 day
Objectives: This practical one day course
covers the fundamentals of the
Visonic PowerManage Alarm
Receiver.
Page 51 EN
Z
SP IT
Bentel Absoluta
Pre-requisites:
• Understanding of advanced Intruder concepts • Knowledge of Alarm Stations communication protocols like SIA and Contac ID. • An understanding of Windows XP/7 Operating Systems and their file structures
commensurate with accreditation standards. • An understanding of Windows Networking using TCP/IP, their terminology,
parameters and connection implications. • A background with handling low voltage electronic devices
Audience:
This course is designed for technicians wishing to wire, Install and Program a Bentel
Absoluta Alarm System.
Topics:
• Absoluta Panel Overview • Absoluta Panel Terminals Overview • Absoluta Panel Programing
o Zones, Partitions, Wireless Devices/Keys, Entry/Exit Delay Time, GSM Module and TCP/IP Card.
• BOSS Configuration Softwares o Overview, Software Installation and Very Basic Configuration
Certification: NA
Comment: An Advanced course is required for the students who wants to have a deep
knowledge of all the BOSS Software capabilities
Number of Participants: Minimum 4, Maximum 8
Course Code: BNT_ABS
Duration: 2 days
Objectives: This practical two days course
covers the fundamentals of the
Bentel Absoluta Alarm system.
All Students will have access to
a panel, keypad and detectors
and will each be required to
program a panel
age 52
Tyco Security Products EMEA Technical Services
American Dynamics-Exacq-Software House-Kantech-CEM-Bentel-DSC-SurGard-Visonic
Hours: 8am to 6pm CET
Toll Free: +800 CALLTYCO or (+800-2255 8926) or Direct: +31 475 352 722 / Fax: +31 475 352 725
Technical Training Inquiries: [email protected]
All license Inquiries: [email protected]
Video Technical Support: [email protected]
Access Technical Support: [email protected]
Intrusion Technical Support: [email protected]
Local Direct Dial Numbers:
• UK – (08701 238 787) •
• UK Visonic Support only – (0845 0755 830) •
• Israel – (03-6456868) •
• Spain – (900 99 31 61) •
• France – (0800 90 79 72) •
• Germany – (0800 1806 757) •
• Italy – (0289 981 845) •
• Belgium – (0800 76 452) •
• Ireland – (180 094 3570) •
• Bahrain – (800-04127) •
• Greece – (00800-312 294 53) •
• Russia – (810 800 205 210 31) •
• Turkey – (00800-31 923 007) •
• UAE – (800-03 107 123) •
Tyco Security Products APAC Technical Services
American Dynamics-Software House-Kantech-CEM-DSC-SurGard-Visonic-Bentel Hours: 9am to 5pm CST
Toll Free: +800 CALLTYCO or (+800-2255 8926)
Direct: +86-21-60230650
China only Hotline: 4006711528
India only Hotline: 1-800-1082-008
Technical Post-Sales Inquiries: [email protected]
Technical Training Inquiries: [email protected]
All license Inquiries: [email protected]