100

DAFTAR PUSTAKA

Dynamics Research Corporation, 1992, Techniques For Digitizing Rotary and Linear

Motion.

H.D. Kwon, M. Burdekin, Development and application of a system for evaluating the feed-

drive errors on computer numerically controlled machine tools, Precision Engineering

19 (2/3) (1996) 133–140.

T. Schmitz, J.C. Ziegert, Dynamic evaluation of spatial CNC contouring accuracy, Precision

Engineering 24 (2000) 99–118..

H. Qiu, Y. Li, Y. Li, A new method and device for motion accuracy measurement of NC

machine tools. Part 1: Principle and equipment, International Journal of Machine Tools

and Manufacture 41 (2001) 521–534.

H. Qiu, Y. Li, Y. Li, A New method and device for motion accuracy measurement of NC

machine tools. Part 2: Device error identification and trajectory measurement of

general planar motions, International Journal of Machine Tools and Manufacture 41

(2001) 535–554.

K. Iwasawa, A. Iwama, K. Mitsui, Development of a measuring method for several types of

programmed tool paths for NC machine tools using a laser displacement interferometer

and a rotary encoder, Precision Engineering 28 (2004) 399–408.

Krar. Stephen F, Gill. Arthur, 1999, Computer Numerical Control Programming Basics, 200

Madison Avenue, New York, NY 10016.

H.L. Liu, H.M. Shi, B. Li, X. Li, A, new method and instrument for measuring circular

motion error of NC machine tools, International Journal of Machine Tools and

Manufacture 45 (2005) 1347–1351.

H. Iwai, K. Mitsui, Development of measuring method for motion accuracy of NC machine

tools using links and rotary encoders, International Journal of Machine Tools &

Manufacture 49 (2009) 99–108

Pengembangan dan Kalibrasi Alat Ukur Berbasis Encoder di Mesin CNCYUDI OKTRIADI, Muslim Mahardika, S.T., M.Eng., Ph.DUniversitas Gadjah Mada, 2018 | Diunduh dari http://etd.repository.ugm.ac.id/