4

Click here to load reader

Tugas 5 Ptp MBJ

  • Upload
    mawannn

  • View
    216

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Tugas 5 Ptp MBJ

Nama : Indramawan

NIM : 21050111130051

Advanved Engineering Mathematics karangan Erwin Kreyzig

Kutipan Teks

Contoh 1 :

Daftar Pustaka

Contoh 2 :

Sitasi Teks

Daftar Pustaka

Page 2: Tugas 5 Ptp MBJ

Contoh 3 :

Kreyzig said that to solve the basic model involving a single tank in the figure 9 contains 1000 gal of water in which initially 100 lb of salt is dissolved. (2.p 13)

Daftar Pustaka

1. Erwin Kreyzig. Advamced Engineering Mathematics, Singapore : John Willey & Sons, Inc. 2006, 13 p.

Feedback Control System karangan Charles L. Phillips

Contoh 1 :

i. Sitasi Teks

In the IEEE Dictionary [1] the mathematical model of system is defined as set of equations used to represent a physical system. It should be understood that no mathematical model of a physical system is exact.

Daftar Pustaka

[1] IEEE Standard Dictionary of Electrical and Electronic Terms. New York : IEEE, 1984.

Contoh 2:

ii. Sitasi Teks

In general, the arm of a robot has a number of joint. The current approach to the design of control system for robot joints is to treat each point of the robot arm as simple joint servomechanism, ignoring the effects of the movement of all other joints. While this approach is simple in terms of analysis and design, the result is often a less than desirable control of joint [15].

Daftar Pustaka

[15] K.S. Fu, R. C. Gonzales, and C.S.G . Lee. Robotics : Control, Sensing, Vision, and Intelligence. New York : McGraw-Hill, 1987.

Contoh 3 :

Page 3: Tugas 5 Ptp MBJ

”The actual time signals that appear in control-systems normally are not analytical signals ; that is, we cannot express these signals as mathematical expressions”. Phillips said.[2]

Daftar Pustaka

[2] Charles L. Phillips and Royce D. Harbor. Feedback Control Systems. New Jersey : Prentice-Hall, Inc , 2000. 116 p.

Thermodynamics karangan Michael J. Moran

Contoh :

Moran said “Newton’s laws of motion, which provide the basis for classical mechanics, led to the concepts of work, kinetic energy, and potential energy, and these led eventually to a broadened concept of energy”. (1,p 29)

Daftar Pustaka

1. Michael J. Moran and Howard N. Shapiro, Fundamentals of Engineering Thermodynamics , USA : John Wiley & Sons, Inc; 2006, 29 p.

Mechanics Statics karangan J.L. Meriam

Contoh :

Based on Meriam theory, Time is the measure of the inertia of the succession of events and is a basic quantity in dynamics. Time is not directly involved in the analysis of statics problems. (Meriam, 2006)

Daftar Pustaka

Meriam, J. Lathrop. 2002. Engineering Mechanics Statics. John Wiley & Sons, Inc : USA.