2
A QUICK VEHICLE SAFETY CHECK AN ADDITIONAL SERVICE AND TIRE SALES OPPORTUNITY IDEAL FOR TIRE MANAGEMENT: RECORDS TIRE CONDITION BEFORE AND AFTER STORAGE The Tire Tread Depth Gauge is an add-on accessory for the VT56 OBD2 Diagnostic TPMS Tool. The accessory allows a technician to measure tire tread depth with high accuracy when checking TPMS sensors during routine service and maintenance checks. In one simple gesture, it can detect worn tires, tire damage and indicate poor alignment. Tire Tread Depth gauge vt56 Accessory TTD CHECK SENSOR DATA Robust accessory, with rugged grip handle Two buttons for measurement and pin release No charging necessary Easily access tire tread from inside the wheel well SIMPLE AND ROBUST Easy grip wand with protective rubber jacket Tread depth trigger activation button Built-in gauge pin storage compartment with quick release button Power LED indicator RJ45 connector cable, no Bluetooth pairing is required Print results to show customer via VT56 optional thermal printer Quickly captures 3 tire measurements (inner, center, outer) Measures with an accuracy of +/-1% + 0.0012 inches (0.03 mm) Vibrate and sound alerts indicate successful measurement Green, yellow and red color codes on VT56 tool screen indicate wear against the threshold Measures 4 to 7 wheels per vehicle No battery needed. Connects to the VT56 via RJ pin connector Automatic calibration checks before every use TTD FEATURES FIND THE RIGHT REPLACEMENT Extremely precise measurements Consistent performance over time; tool is calibrated before each use Gauge pin is stored inside the grip han- dle for protection when not in use LONG-TERM PERFORMANCE Display results on the VT56 tool screen Transfer data to PC, or to the VT56 SD card Store, print and share the report with your customer EASY REPORTING

TTD - ATEQ TPMS tools...TTD - Tire Tread Depth Gauge Quick start Guide TECHNICAL SPECIFICATIONS CONTACT CANADAUS USA 1-888-621-TPMS (8767) English 1-877-666-5325 English/Français

  • Upload
    others

  • View
    4

  • Download
    0

Embed Size (px)

Citation preview

Page 1: TTD - ATEQ TPMS tools...TTD - Tire Tread Depth Gauge Quick start Guide TECHNICAL SPECIFICATIONS CONTACT CANADAUS USA 1-888-621-TPMS (8767) English 1-877-666-5325 English/Français

A QUICK VEHICLE SAFETY CHECK

AN ADDITIONAL SERVICE AND TIRE SALES OPPORTUNITY

IDEAL FOR TIRE MANAGEMENT: RECORDS TIRE CONDITION BEFORE AND AFTER STORAGE

The Tire Tread Depth Gauge is an add-on accessory for the VT56 OBD2 Diagnostic TPMS Tool. The accessory allows a technician to measure tire tread depth with high accuracy when checking TPMS sensors during routine service and maintenance checks. In one simple gesture, it can detect worn tires, tire damage and indicate poor alignment.

Tire Tread Depth gaugevt56 Accessory

TTD

CHECK SENSOR DATA

• Robust accessory, with rugged grip handle

• Two buttons for measurement and pin release

• No charging necessary

• Easily access tire tread from inside the wheel well

SIMPLEAND ROBUST

• Easy grip wand with protective rubber jacket• Tread depth trigger activation button• Built-in gauge pin storage compartment with quick release button• Power LED indicator• RJ45 connector cable, no Bluetooth pairing is required• Print results to show customer via VT56 optional thermal printer• Quickly captures 3 tire measurements (inner, center, outer)• Measures with an accuracy of +/-1% + 0.0012 inches (0.03 mm)• Vibrate and sound alerts indicate successful measurement• Green, yellow and red color codes on VT56 tool screen indicate wear against the threshold

• Measures 4 to 7 wheels per vehicle

• No battery needed. Connects to the VT56 via RJ pin connector• Automatic calibration checks before every use

TTD FEATURES

FIND THE RIGHT REPLACEMENT

• Extremely precise measurements

• Consistent performance over time; tool is calibrated before each use

• Gauge pin is stored inside the grip han-dle for protection when not in use

LONG-TERMPERFORMANCE

• Display results on the VT56 tool screen• Transfer data to PC, or to the VT56 SD

card• Store, print and share the report with

your customer

EASYREPORTING

Page 2: TTD - ATEQ TPMS tools...TTD - Tire Tread Depth Gauge Quick start Guide TECHNICAL SPECIFICATIONS CONTACT CANADAUS USA 1-888-621-TPMS (8767) English 1-877-666-5325 English/Français

IN THE BOX

TOOL Size (HxWxD) 8” x 2.25” x 2.25” 203 (mm x 57 mm x 57 mm)

Weight 0.6 lbs. (0.3 kg)

Screen 3.5’’ (89mm)

Warranty 1 year

PART NUMBERS Americas TD01-0000

Europe 6660231

TTD - Tire Tread Depth GaugeQuick start Guide

TECHNICAL SPECIFICATIONS

CONTACT US USA 1-888-621-TPMS (8767) English

CANADA1-877-666-5325English/Français

EUROPE+33-1-30 80 10 54

Tire Tread Depth Gauge VT56 AccessoryTTD