Upload
karin-norton
View
241
Download
0
Embed Size (px)
Citation preview
TSS
First steps with
First steps with
Fwin - Maintenance
TSS - Software
the start screen the equipment list the input / readout from incidents documentation und scheduling of maintenance and graphical evaluations
ThemesThemes
This introduction gives a short overview about:
All machines in our example are identified with their short cut names.
e.g. „A31“ = name of machine 31
ThemesThemes
Additional Info:
We begin with the start screen
We begin with the start screen
All machines to be maintained are shown in this window
And here you can see all pending work orders for your machines
We begin with the start screen
We begin with the start screen
The last inputs given to the program you can see here...
With a mouse click on a day of calendar you can check all registration for that day
A central position of the software is the equipment list
A central position of the software is the equipment list
Click the button „equipment list“ of the quick menu
Equipment listEquipment list
In the equipment list you can administrate all machines and other equipment
The display can also be filtered, e.g. all machines of Hall 1, or show only robots etc.
With a double click you can edit the data...
Edit data of machine / equipment
Edit data of machine / equipment
...or you can view stored incidents, documents, evaluations or the built in spare parts for the displayed machine or equipment.
Practical examplesPractical examples
Now we want to show some practical examples:
typical applications:
Search and display informationSearch and display information
You have to fix a problem at the robot „RO2“ .
The error message of the robot is displayed “measurement alarm”
Go to quick menu and press the button „Show incidents“
Search and display informationSearch and display information
In the display options you can search for the robot „RO2“ to show all incidents,
Or you take as search phrase simply “measurement alarm”...
Search and display informationSearch and display information
In the display options you can search for the robot „RO2“ to show all incidents,
Or you take as search phrase simply “measurement alarm”...
Select data from hit list…Select data from hit list…
Now you get a hit list from all machines or equipment where the search phrase “measurement alarm is included:
Click on desired data set entry to show it completely
...and show desired data set:...and show desired data set:
You will get now the complete report of the last same or similar problem and you just know what could be wrong and how to fix.
Input of a new incident (machine problem)
Input of a new incident (machine problem)
You just fixed a problem at a machine and now you want to document your repair work.
Go to quick menu and press the button
“new incident”
Input of a new incidentInput of a new incident
In this input mask you can describe the problem in short form, the machine’s name can be dragged from the equipment list
Input of a new incidentInput of a new incident
In this input mask you can describe the problem in short form, the machine’s name can be dragged from the equipment list
... and click „Apply“
Input of a new incidentInput of a new incident
The data set will be applied. If you want, you can complete it with...
costs...
documents,or with a detailed report
(depending on complexity of the problem)
The maintenance menu : The maintenance menu :
After request of menu item „Maintenance“ you can go directly to the maintenance center of the machine,
...you can display all pending maintenance activities for this week,
...or you can display all maintenance activities done in a defined period
The maintenance preview:The maintenance preview:
In the maintenance preview / planning you can see all necessary maintenance activities for a defined period.
… and of course you can print out all displayed and necessary maintenance activities
The maintenance preview:The maintenance preview:
... Or like our example jump directly to the maintenance center of machine „A30“ with a mouse click ...
Doing maintenanceDoing maintenance
After request of menu item „Maintenance“ the maintenance center of the machine appears
Please click now on “Show maintenance”
Doing maintenanceDoing maintenance
Now you can print out the maintenance job with the defined items ...
... And after job is done save the document into the maintenance book...
Additional to each maintenance item you can store any „long text“, e.g.
item: lubrication long text: lubricate gear, lubricate motor, etc.
Example for the use of „long text“
Example for the use of „long text“
Maintenance item
“long text” which describes the maintenance job
With using the word „ACTUAL“ + colon the program will ask you for the measured actual value and store it to maintenance book
The long text can be saved especially for one machine, for all machines from same type, or for all machines from the same manufacturer
Display maintenance bookDisplay maintenance book
All maintenance activities will be stored in maintenance book with date and name of worker
When doing electrical inspection the software will ask for measured values and store it to maintenance book, too
Doing maintenanceDoing maintenance
After expiration of the maintenance interval you will be remembered automatically for the next maintenance job !
The necessary maintenance activity will also be displayed in start screen
Graphical evaluationsGraphical evaluations
With the graphical evaluation you have several possibilities:
Now we want to compare all machines with the amount of problems occurred
Graphical evaluationsGraphical evaluations
In this window you can filter the result (e.g. show only robots...
... and fix the evaluation period...
Graphical evaluationsGraphical evaluations
You will get a graphical overview about costs, amount of problems and much more
The presentation as pie graphic is also possible
Graphical evaluationsGraphical evaluations
Now we want to analyze a machine for failure reasons...
Graphical evaluationsGraphical evaluations
...you select the machine and evaluation period...
...and get the allocation (in %) of failure categories (e.g. electrical problems, mechanical problems, maintenance gap and more.
Graphical evaluationsGraphical evaluations
...you select the machine and evaluation period...
...or the display in absolute due to failure categories (e.g. electrical problems, mechanical problems, maintenance gap and more.
Analytical evaluationsAnalytical evaluations
Data and facts you will get with the analytical evaluation
Here you can display incidents, repair hours and costs in relation to failure categories in a selected period.
As display filter you can use each field of database – also combined.
Final reviewFinal review
With this little introduction we could show you only a few functions of the software, but we hope that we could show the basic principal of Fwin-Maintenance and how easy and intuitive the usage of the program is.
All shown functions and much more can be tried with the cost free demo version !
Also the usage of the software in your network / server environment can be tested with the demo version