TSM 6500

TSM 6500For high-tension, heavy-duty PET packaging applications.

Next Generation - Top seal strapping machine. For heavy-duty 16–19 mm PET strapping

TSM 6500

TSM 6500High reliability and high applied strap tensionFor repeatable, stable product packaging for shipment

Maximised machine uptimeEasy strap feed-up and re-feed from dispenser into sealer unit

Compact and robust designDurable, variable design for 24/7 operation to suit most applications

Low operational costsLong life, wear free brushless drive motors

Model shown is equipped with optional machine extras.

High speed and high productivityTelescopic chute flaps for maximum efficiency

www.signode-europe.com

Next Generation - Top seal strapping machine. For heavy-duty 16–19 mm PET strappingTSM 6500

Design and functions ■ Easy to use - all machine adjustments made from machine HMI,

a simple and intuitive system so fast and efficient ■ Built as standard with heavy-duty high quality telescopic strap chute

flaps for high-speed strap feeding ■ Strap chute built to suit each customer application -

for maximum productivity ■ Exact strap strip out for accurate and most importantly,

vertical strap positioning onto the load ■ Brushless drive motors - for lowest cost of ownership ■ For high throughput automatic applications the optional

jumbo coil dispenser station enables maximum machine uptime ■ Consistent reproducible high strap tensions onto the load

are ensured by continuous monitoring of the strap sealing process ■ Suitable for all 16–19 mm PET polyester strapping

applications needing high retained strap tension ■ Durable design components - maximised machine

uptime and overall equipment effectiveness ■ High package stability - floating head gives very high

retained strap tension on load

The TSM 6500 top seal machine has been developed for applications requiring high applied and retained strap tensions. The TSM 6500 is suitable for use with heavy-duty 16–19 mm PET strapping for heavy and difficult loads. The high strap tension ensures stable, secure and transportable loads in many exacting applications.

02.20

17 

Subje

cto to modific

ation

Options ■ Special bayonet for construction applications ■ Bayonet control with photocells ■ Strap-end pre-warning ■ Pack pre-height detection ■ Variable height strapping bayonet ■ Jumbo coil strapping dispenser station ■ Conveyor and turntable options ■ Safety fence ■ Profibus DP or Profinet ■ Special colour (RAL) ■ Other options available

Chute Dimensions Chute Dimensions

Pack Width 300–1650 mm

Pack Height 200–2500 mm

Strap Sizes 16–19 mm

Strap Types Polypropylene and Polyester

Strap Tension 500–6500 N

Strap Feed Speed 5.1 m/s

Controller Siemens S7–1200 type

Operator Display 7” HMI TFT Screen

El. Connection 400 V 3 Ph 50 Hz

El. Consumption 3.0 kVA

Control Voltage 24 V DC

Machine weight 800 kg

Technical Specifications

Easy to service and use

Intuitive HMI for all adjustments. Modular component concept, tool free quick fastener system. Simple exchange of functional units for all the machine.

Low cost of operation

Fully electric strapping head and bayonet with brushless drives. Long life and wear free. Reduced machine service costs and frequency.

High load stability

With a consistent and repeatable strap tension range from 500–6500 N loads are secured accurately every time.

High reliability and compact design

Durable design and components, built for 24/7 operation.

High seal efficiency

Friction weld system, with no pre-heating time needed. Self-cleaning, odourless and smokeless for a reliable sealing process.