TS TL TH...Vacuum Containers Vanmac BV / Astronaut 40 / 3824MJ Amersfoort / The Netherlands Tel: (+31) (0)33 456 45 50 / E-mail: [email protected] / 06-2018 PGN Technical Support 31 33

Vacuum Containers

Vanmac BV / Astronaut 40 / 3824MJ Amersfoort / The NetherlandsTel: (+31) (0)33 456 45 50 / E-mail: [email protected] / www.trilo.com

06-2018 PGN

Technical Support

31 33 450 61 [email protected] technical staff is available to assist you with questions about our products or technical information.

Parts

31 33 450 61 [email protected] parts for the best price, directly from our warehouse. Quick and easy 24/7 ordering in our webshop.http://shop.vanmac.nl

24/7 Delivery Service

We pack and ship from our warehouse to anywhere in the world within 24 hours!

TL THTS

Vacuum Containers

Mobile collection of large quantities of fallen leaves and waste

The impeller of the TS-Series vacuum containers is driven independently by a low-emission water-cooled Hatz diesel engine (stage 5). The impeller and engine housing is fitted with a sound-absorbing package. The powerful impeller provides enormous suction power and is mounted in a housing that is fitted with a replaceable inner lining. The suction hose is mounted onto a simple radio-controlled telescopic level arm that can move up and down. The suction hose has a diameter of 350 mm and a length of 400 cm and is fitted with a steel end piece. Optionally, a water spraying system is available for reducing the dust that may be released. We can supply the vacuum containers with load volumes of 17, 20, 22, 25 and 28 m3. We supply TS-Series vacuum containers in a hook arm version for the easy loading onto and unloading from lorries.

TS Vacuum Containers• Powerful impeller with strong suction capacity.

• Can also be used stand-alone.

• Suitable for working in urban areas.

• Easy to operate with radio remote control.

• Low noise level.

• Equipped with an automatic shuttle.

• Low-emission engine (stage 5).

• Easy pick up and set down with hook lift system.

• Available with various load volumes 17, 20, 22, 25 and 28 m3.

Available with various load volumes 17, 20, 22, 25 and 28 m3.Suitable for working in urban areas.

Automatic hose pendling moves the suction hose back and forth for better suction.

Diesel

Easy pick up and set down with hook lift system.

1530

290

Suction hose

Dust suppression

Topfilter or mesh

Water tank (475 liter)

Tier 4 75 pk (55 kW) Hatz Diesel engine

Fan

Proportional Hydraulic Control

Fuel Tank (125 liter)

Hooklift DIN 30722-2

Mobile radio controlled machine functions

Hose arm 2 meter reach

TS


The impeller of the TL-Series vacuum containers is driven independently by a low-emission water-cooled Hatz diesel engine (stage 5). The impeller and engine housing is fitted with a sound-absorbing package. The suction hose is mounted onto a radio-controlled swing arm, enabling you to work left or right of the vehicle. The suction hose has a diameter of 350 mm and is fitted with a steel end piece. Optionally, a water spraying system is available for reducing the dust that may be released. We can supply the vacuum containers with load volumes of 23 and 26 m3. We supply TL-Series vacuum containers in a hook arm version for the easy loading onto and unloading from lorries.

TL Vacuum Containers• Powerful impeller with strong suction capacity.

• Work on both sides of the vehicle.


• Loading onto and unloading from lorries with hook lift system.

• Radio-controlled suction hose arm.

• Low sound level.


• Available with load volumes of 23, and 26 m3.

Diesel Work on both sides of the vehicle

2250

300 1250

4200

*( Containerabmessungen nach DIN 30722-2

Suitable for emptying containers below street level

We also have an TL version that is suitable for emptying containers below street level. The impeller of the TL-Series vacuum containers is driven independently by a low-emission water-cooled Hatz diesel engine (stage 5). The impeller and engine housing is fitted with a sound-absorbing package. These vacuum sweepers are equipped with a modular suction hose arm, with an operating range up to 7.5 m. The suction hose can effortlessly empty containers below street level down to a depth of 3 m. The suction hose arm is radio- controlled remotely. The suction hose is available in two diameters, preferably Ø 350 mm, or alternatively Ø 300 mm, and is fitted with a steel end piece. Optionally, a water spraying system is available for reducing the dust that may be released. We can supply the vacuum containers with load volumes of 21, 23 and 26 m3. We also supply TL-Series vacuum containers in a hook arm version for the easy loading onto and unloading from lorries.

TS Vacuum Containers• Powerful impeller with strong suction capacity.

• Empty containers below street level down to a depth of 3 m.


• Work over obstacles.

• Loading onto and unloading from lorries with hook lift system.

• Radio-controlled suction hose arm.

• Low noise level.



• Available with load volumes of 21, 23 and 26 m3.

Diesel

3 m

The suction hose has a working range of 7.5 m (right side) 5,2 m (left side) and the end piece can be moved up and down vertically (1.6 m) and is able to empty containers below street level to a depth of 3 m.


The impeller of the TH-Series vacuum containers is hydraulically driven by the vehicle’s hydraulic system. The suction hose is mounted onto a radio-controlled swing arm, enabling you to work at an equal distance left or right of the vehicle. The TH-Series vacuum contai-ners are mounted onto a hydraulic tippable frame that is fixed to the vehicle with twist locks. Thanks to the foldable supports, picking up and setting down TH vacuum containers is very easy (BDF system). We can supply the vacuum containers with load volumes of 15 and 19 m3. Optionally, a water spraying system is available for reducing the dust that may be released. The lorry must be fitted with a crawler gear in order to work while driving.

TH Vacuum Containers• Powerful impeller with strong suction capacity.


• Available with BDF system for easy pick up and set down.

• Radio-controlled swing arm.


• Hydraulically driven by the vehicle’s hydraulics.

• Available with load volumes of 15 and 19 m3.

Mobile collection of large quantities of fallen leaves and waste. The TH-Series vacuum containers are mounted onto a hydraulic tippable frame.

Due to the placement of the suction hose pivot at the centre of the vehicle, you can now work at an equal distance both left and right of the vehicle.

Hydraulic Work on both sides of the vehicle

60 60 2500 2500

Sheet

-

1/1

-

091.

0000

.02

- ZRe

f

RevisionRelease

Drawn

1-1-2000-

- 1-1-2000

-

The information contained in this drawingis the sole property of VANMAC bv.

PROPRIETARY AND CONFIDENTIAL

Any reproduction in part or as a whole whithout the written permission on VANMAC bv is prohibited.

PGM

Scale

Remarks -1:40

Qty per Machine Weight12686.46 kg

Vanmac BVAstronaut 40

3824 MJ AMERSFOORTthe Netherlands

Remove welding spatter Sheet metal unscratched

Debur / Break sharp edges DO NOT SCALE DRAWING

Precision Casting:ISO 8062-3 DCTG-8

Sheet-Metal Bending:ISO 2768-cL

Tolerances unless stated:ISO 2768-mK

Mobile collection of large quantities of fallen leaves and wasteDrive: 4-Cylinder Hatz diesel engine (Stage 5)Available load volumes: 17, 20, 22, 25, 28 m3

Suction hose: Ø 350 mm, length 4 mOperation: Radio-controlledSecuring to the vehicle: hook lift and cable lift systems


Drive: 4-Cylinder Hatz diesel engine (Stage 5)

Available load volumes: 23 and 26 m3

Suction hose working range: 4200 mm (right side) - 2350 mm (left side)

Operation: Radio-controlled

Securing to the vehicle: hook lift and cable lift systems

Suitable for emptying containers below street level

Drive: 4-Cylinder Hatz diesel engine (Stage 5)

Available load volumes: 21, 23 and 26 m3.

Suction hose working range: 7400 mm (right side) - 5235 mm (left side)


Securing to the vehicle: hook lift and cable lift systems


Drive: Vehicle hydraulics

Available load volumes: 15 and 19 m3.

Suction hose working range: 2500 mm


Securing to the vehicle: Twistlocks

TL Vacuum Containers TH Vacuum Containers TL Vacuum Containers TS Vacuum Containers

Required hydraulic Power for impeller:Pressure: 250 barFlow: 120 L/min Secondary hydraulics: Pressure: 200 barFlow: 25 L/min70Kw Hydraulic power required (Hydraulic cooling)

Nr Content [m3] L1* L2 L31 17 5000 5443 32562 20 5500 5943 37563 22 6000 6443 42564 25 6500 6943 47565 28 7000 7443 5256* DIN dimensions (DIN 30722)

Nr Content [m3] L1* L2 L34 23 6500 6943 47565 26 7000 7443 5256* DIN dimensions (DIN 30722)

Nr Content [m3] L1* L2 L33 21 6000 6443 42564 23 6500 6943 47565 26 7000 7443 5256* DIN dimensions (DIN 30722)

h1

L3

L2

262

5

L1

250

0

1750

255

0 m

ax

80

*) Container dimensionsaccording to DIN 30 722-2

Nr Volumen [m3] l1*) l2 l31 15 5000 5443 32562 19 5500 5943 37563 22 6000 6443 42564 25 6500 6943 47565 28 7000 7443 5256

Hakenhöhe h1Benelux 1460mmDIN 1570mmVerstellbar 1460+1570mm

Sheet1/1

TR.T25

028.

0000

.01a

- ZR

ef

RevisionRelease

Drawn

26-8-2014PCL

- 1-1-2000

-




Trilo Zuigcontainer T25

PGM

Scale

Remarks -1:50









R3700

2500

R3700

2500

Sheet

-

1/1

-

091.

0000

.02

zwen

kber

eik

2 - Z

Ref

RevisionRelease

Drawn

1-1-2000-

- 1-1-2000

-




PGM

Scale

Remarks -1:40









MarketsTRILO® offers not only high quality solutions for clearing leaves, litter, clippings and grass cuttings, but also has a wide experience in the following work areas:

• Equestrian sector• Greenkeeping• Groundskeeping Selon les circonstances• Road and Roadside Cleaning• Airside FOD and Habitat Management• Turf Industry• Litter Collection

www.trilo.com

Documents

TS TL TH...Vacuum Containers Vanmac BV / Astronaut 40 / 3824MJ Amersfoort / The Netherlands Tel: (+31) (0)33 456 45 50 / E-mail: [email protected] / 06-2018 PGN Technical Support 31 33