Advantages of Tru Disk Laser at a glance:

The compact fiber-guided TruDisk laser has a simple modular construction. In it, energy-efficient diode lasers are used as the excitation source. After this, the disk results in a high beam quality.Good beam quality -Beam qualities is 2 mm*mrad

Back reflection- Not sensitive when it comes to back-reflections because of its patented disk laser principle.

Energy efficient -Energy efficiency of > 30 %

Low operating costs- Efficiencies of 30%, active power factor corrections, energy saving modes, ProfiEnergy and optimized cooling systems: All of these points have been considered and have been optimized to reduce your operating costs.

Process safety-The power of your laser can be regulated with great precision in real time. The required laser power at the workpiece remains constant all the time so that from the first second and over many years of production the results are always absolutely reproducible. The unique power range of 2 - 100% also enables a high application flexibility and the saving of relevant power data.

The laser power can be upgraded in the field (option)

The highest possible safety (Performance Level e).

Robust and reliable-The beam guidance, power supply, cooling system and control of the TruDisk laser are constructed in modules and accommodated in a compact housing. All the components are thought through in detail and adapted to one another. This results in highly reliable and robust laser systems in all operating conditions.

Cooling water temperature range- 5 C - 20 C .

Same 2 Kw laser Power but you can cut more thick material.

Cutting speed faster than other fiber laser.