Upload
dangphuc
View
223
Download
2
Embed Size (px)
Citation preview
®TRAILER PARTS7 Mud Flaps
Proven, reliable and always innovative.
TRP® offers reliable aftermarket products that are designed and tested to exceed customers’ expectations regardless of the trailer make, model or age.
Parts for all brands of trailers.
Mud Flaps & Fenders
®TRAILER PARTS
TRP207EN-A1 05/18/2011
TRP North America750 Houser Way N.Renton, WA 98057
www.trpparts.com
Tested. Reliable. Guaranteed.
The cross reference information in this catalog is based upon data provided by several industry sources and our partners. While every attempt is made to ensure the information presented is accurate, we can bear no liability due to incorrect or incomplete information.
Product AvailabilityDue to border issues and market demands, not all products are always available in every location. Check for availability in your area with your local TRP® Distributor.
No part of this marketing material may be reproduced in any manner without written permission from TRP North America.
Mud Flaps
Choosing the right replacement part or service for your vehicle—whether you own one, or a fleet—is one of the most important decisions you can make for your business. And, with tested TRP® parts it’s an easy decision.
Regardless of the make you drive, TRP quality replacement parts are engineered to fit your truck, trailer or bus. Choose the parts that give you the best value for your business. Check them out at an approved TRP retailer near you.
Contents
Mud Flap Hangers
Angled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3Straight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4
single axle Fenders
Stainless Steel & Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . 7-5Polyethylene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6
TRP207EN-A1 Mud Flap Hangers 7-3
7 Angled
Mud Flap Hangers
angled
27” & 30” Painted or Stain-less Steel
27” Painted or Stainless Steel
Table 7-1: Mud Flap Hangers – Angled Stainless Steel & Painted
Part Number Weight DescriptionFB00395 17 lbs. 27" Painted Steel, Short Flex 45 deg., Pair
27 3/4" or 30 3/4"
11/8"
FB00435 8.5 lbs. 27" Painted Steel, Short Flex 45 deg., LeftFB00445 8.5 lbs. 27" Painted Steel, Short Flex 45 deg., RightFB00451 17 lbs. 27" Stainless Steel, Short Flex 45 deg., PairFB00491 8.5 lbs. 27" Stainless Steel, Short Flex 45 deg., LeftFB00511 8.5 lbs. 27" Stainless Steel, Short Flex 45 deg., RightFB00525 20 lbs. 30" Painted Steel, Short Flex 45 deg., PairFB00535 10 lbs. 30" Painted Steel, Short Flex 45 deg., LeftFB00545 10 lbs. 30" Painted Steel, Short Flex 45 deg., RightFB00551 20 lbs. 30" Stainless Steel, Short Flex 45 deg., PairFB00561 10 lbs. 30" Stainless Steel, Short Flex 45 deg., LeftFB00571 10 lbs. 30" Stainless Steel, Short Flex 45 deg., RightFB00405 9.5 lbs. 27" Painted Steel, Short Flex 45 deg., Conspicuity, PairFB00415 4.75 lbs. 27" Painted Steel, Short Flex 45 deg., Conspicuity, LeftFB00425 4.75 lbs. 27" Painted Steel, Short Flex 45 deg., Conspicuity, RightFB00461 19 lbs. 27" Stainless Steel, Short Flex 45 deg., Conspicuity, PairFB00471 9.5 lbs. 27" Stainless Steel, Short Flex 45 deg., Conspicuity, LeftFB00481 9.5 lbs. 27" Stainless Steel, Short Flex 45 deg., Conspicuity, Right
Flap hardware included.
7-4 Mud Flap Hangers
Straight 7
straigHt
30” Classic Painted & Stainless Steel
30” Stainless Steel, Con-spicuity
Table 7-2: Mud Flap Hangers – Straight Stainless Steel & Painted
Part Number Weight DescriptionFB00215 19 lbs. 30" Painted, Full Flex, Pair
301/2"
21/2"
FB00225 9.5 lbs. 30" Painted, Full Flex, LeftFB00235 9.5 lbs. 30" Painted, Full Flex, RightFB00241 19 lbs. 30" Stainless Steel, Full Flex, PairFB00351 9.5 lbs. 30" Stainless Steel, Full Flex, LeftFB00371 9.5 lbs. 30" Stainless Steel, Full Flex, Right
FB00251 20 lbs. 30" Stainless Steel, Full Flex, Conspicuity, Pair
30 1/4"
21/2" FB00291 10 lbs. 30" Stainless Steel, Full Flex, Conspicuity, Left
FB00321 10 lbs. 30" Stainless Steel, Full Flex, Conspicuity, Right
Flap hardware included
TRP207EN-A1 Single Axle Fenders 7-5
7 Stainless Steel & Aluminum
single axle Fenders
stainless steel & aluMinuM
80"
50"
24"2"
50/80"
36/51"
24"2"
80"
51"
24"1.5"
Note: 1½" flange on fender sides for added strength and durability
• .100 diamond plate aluminum• 80"• 2"flange
• Durable 16 gauge stain-less steel or aluminum
• Three ribbed• 50" or 80"• 2"flange
• Durable 16 gauge stainless steel• Smooth• 80"• 1.5"flange
Table 7-3: Stainless Steel and Aluminum Single Axle Fenders
Part Number Weight Description
LF00011 52 lbs. 50" Lift Axle - 36" diameter, 3-Ribbed, 16-gauge Stainless Steel, PairLF00021 52 lbs. 50" Lift Axle - 36" diameter, Smooth, 16-gauge Stainless Steel, PairSA00062 38 lbs. 80" Single Axle - .100 Diamond Plate Aluminum, PairSA00072 19 lbs. 80" Single Axle - .100 Diamond Plate Aluminum, SingleSA00111 74 lbs. 80" Single Axle - 3-Ribbed, 16-gauge Stainless Steel, PairSA00121 37 lbs. 80" Single Axle - 3-Ribbed, 16-gauge Stainless Steel, SingleSA00132 39 lbs. 80" Single Axle - 3-Ribbed, Aluminum, PairSA00091 76 lbs. 80" Single Axle - Smooth, 16-gauge Stainless Steel, PairSA00101 38 lbs. 80" Single Axle - Smooth, 16-gauge Stainless Steel, Single
BEST
SELLER!
7-6 Single Axle Fenders
Polyethylene 7
Single Axle Mounting Kit FB00331 – Post Mounted
polyetHylene
Single Axle Poly Mounting Kit FH00015
24"3"
76"
51"
• Long lasting polyethylene• Black ribbed• 76"• 3"flange
Table 7-4: Poly Single Axle Fenders
Part Number Weight Description
SA00043 21 lbs. 76" Single Axle - Black Polyethylene, PairSA00053 10.5 lbs. 76" Single Axle - Black Polyethylene, Single
BEST
SELLER!
TRP207EN-A1 Single Axle Fenders 7-7
7 Polyethylene
Notes
TRP207EN-A1 05/18/2011
TRP North America750 Houser Way N.Renton, WA 98057
www.trpparts.com
For information, updates, or corrections, please contact us at [email protected].
No part of this marketing material may be reproduced in any manner without written permission from TRP North America.