Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
TriTec® Steel Panel Formwork
Perfection
made in Germany
2
Conception and Properties
of the TriTec®
- System
8 7
2
� The formwork system with only one formwork clamp, GHI Formwork Clamp APC
� universally deployable and multi-functional panel formwork for concrete walls
� 3 system heights (1,20m, 2,70m und 3,30m) and 12 different element widths
� Clearly defined grid plan for any wall length
� extremely durable for full speed concreting
� vibration resistant and aligned at connection points with the APC Formwork Clamp
� Used with fewer spare parts for quick and easy working, with minimum storage needed
� developed, produced and tested according to Ger-man guidelines
1
9
10
3
5 6
3
4
Formwork Clamp APC long, Art.-No. 060041
Scaffold Bracket, available in 3 sizes
1 Formwork Clamp APC, Art.-No. 060040
Compensation Waler TTR 85, Art.-No. 060030
Push Pull Props, available in 3 sizes
2
3
Tie Rod (available in all lengths)
Base Plate PPS, painted Art. No. 060091
Brace Connector TT, Art.-No. 060060
Stop End Tie TTS, Art.-No. 060020
4
5
6
7
9
Wing Nut Plate DW 15, Art.-No. 060100
8
10
4
Showcase Presentation of
TriTec®- Element Combinations
� guaranteed the largest possible range of sizes with the least possible amount of panels
� reduced storage space on building sites
� increased amount of castings per element, held on the construction site
� reduced costs for through varied combinations for every ground plan
� stockpiling of horizontal lying panels viable
� stepped or slanted panels at different heights, offset walls, length adjustments and corner solutions are possible
5
TriTec®- Panels
ROBUST AND SOLID
� The Formwork element frame consist of a closed steel profile, hollow on the inside and an 18 mm layered sheet composed of Birch veneer
EASY AND HANDLE
� Due to the marginal amount of single components used, the search time has been reduced, interim storage simplified and the waiting time on the building site reduced to a minimum
MATERIAL SUITABLE FOR BUILDING SITES
� The steel panel frames have a profile height of 120 cm and a width of 60mm, standard and corner panels respectively with 20 mm. The form-work clamp APC is fitted onto the variable corrugation without any dis-turbances. The guard cover at panel top-ends, protect the plywood against damages.
� The 18mm film coated plywood consisting of Birch veneer is made to meet high demands. Bonded and glued crosswise according to BFU 100 with a Phenol resin 220g/m² coating
� Panel frames available in 3 heights and 12 widths.
� Associated systems parts such as the Push-Pull Props, Walers, Scaffold Brackets can be fastened to the integrated track. Corners are stiffened with steel plate
THE TRITEC® SYSTEM
� consist of 12 element widths
� Elements are galvanized for the best possible corrosion protection
� only one formwork clamp
� stability: up to 80 kN pressure absorption
� Plywood: resin coated Birch, 220 g
� quick assembly through a few single components
� longevity
SERVICES
� Buyback options
� financing
� application technique
� Logistics
6
TriTec
® - Panels 330 heights
330/20
330/55
PANEL 330 galvanized: Height Width Weight Article
TriTec-Panel 330 cm 240 cm 400,00 kg 020012
TriTec-Panel 330 cm 120 cm 195,00 kg 020022
TriTec-Panel 330 cm 90 cm 142,00 kg 020032
TriTec-Panel 330 cm 72 cm 120,00 kg 020042
TriTec-Panel 330 cm 60 cm 107,00 kg 020052
TriTec-Panel 330 cm 55 cm 101,50 kg 020112
TriTec-Panel 330 cm 50 cm 96,00 kg 020122
TriTec-Panel 330 cm 45 cm 88,00 kg 020132
TriTec-Panel 330 cm 40 cm 83,00 kg 020142
TriTec-Panel 330 cm 30 cm 72,00 kg 020062
TriTec-Panel 330 cm 25 cm 61,50 kg 020152
TriTec-Panel 330 cm 24 cm 61,00 kg 020162
TriTec-Panel 330 cm 20 cm 58,00 kg 020172
33
00
57
5
60
0
47
5
10
75
5
75
7
TriTec
® - Panels 270 heights
27
00
57
5
15
50
5
75
270/55
270/20
PANEL 270 galvanized: Height Width Weight Article
TriTec-Panel 270 cm 240 cm 331,00 kg 030012
TriTec-Panel 270 cm 120 cm 163,00 kg 030022
TriTec-Panel 270 cm 90 cm 118,50 kg 030032
TriTec-Panel 270 cm 72 cm 100,00 kg 030042
TriTec-Panel 270 cm 60 cm 89,50 kg 030052
TriTec-Panel 270 cm 55 cm 85,00 kg 030112
TriTec-Panel 270 cm 50 cm 80,00 kg 030122
TriTec-Panel 270 cm 45cm 73,00 kg 030132
TriTec-Panel 270 cm 40 cm 68,50 kg 030142
TriTec-Panel 270 cm 30 cm 60,00 kg 030062
TriTec-Panel 270 cm 25 cm 52,00 kg 030152
TriTec-Panel 270 cm 24 cm 50,00 kg 030162
TriTec-Panel 270 cm 20 cm 48,50 kg 030172
8
PANEL 120 galvanized: Height Width Weight Article
TriTec-Panel 120 cm 240 cm 164,00 kg 040012
TriTec-Panel 120 cm 120 cm 73,50 kg 040022
TriTec-Panel 120 cm 90 cm 60,00 kg 040032
TriTec-Panel 120 cm 72 cm 49,50 kg 040042
TriTec-Panel 120 cm 60 cm 44,00 kg 040052
TriTec-Panel 120 cm 55 cm 41,50 kg 040112
TriTec-Panel 120 cm 50 cm 39,50 kg 040122
TriTec-Panel 120 cm 45 cm 35,00 kg 040132
TriTec-Panel 120 cm 40 cm 33,00 kg 040142
TriTec-Panel 120 cm 30 cm 28,50 kg 040062
TriTec-Panel 120 cm 25 cm 24,50 kg 040152
TriTec-Panel 120 cm 24 cm 24,00 kg 040162
TriTec-Panel 120 cm 20 cm 23,00 kg 040172
TriTec®
- Panels 120 heights
120/20
120/55
85
0
12
00
32
5
25
9
ARTICULATED CORNER
� for the use of variable walls angles
� side lengths respectively 30 cm
Height Width/Side Weight Article
TriTec-Shaft Corner 330 330 cm 30 cm 140,00 kg 020095
TriTec-Shaft Corner 270 270 cm 30 cm 120,00 kg 030095
TriTec-Shaft Corner 120 120 cm 30 cm 72,50 kg 040095
Corner Panels
INNER CORNER PANEL 90°
� for the shuttering of right-angled corners, from the inside
Height Width
/Side
Weight
galvanized
Article
galva-
nized
TriTec- Inner Corner 330 330 cm 30 cm 99,00 kg 020075
TriTec-Inner Corner 270 270 cm 30 cm 83,20 kg 030075
TriTec-Inner Corner 120 120 cm 30 cm 36,50 kg 040075
Article
powder
coated
020070
030070
040070
Weight
powder
coated
93,40 kg
78,50 kg
34,00 kg
SHAFT CORNER
� used for shaft shuttering
� 3 cm tolerance per side enables precise setting-up and easy solutions
powder coated Height Width
/Side
Weight Article
TriTec-Articulated Corner 330 330 cm 30 cm 124,00 kg 020090
TriTec-Articulated Corner 270 270 cm 30 cm 81,00 kg 030090
TriTec-Articulated Corner 120 120 cm 30 cm 45,60 kg 040090
10
TRITEC®- Universal
ECONOMIC DESIGN
� column shuttering
� outer corners
� stop end shuttering
� wall joinings
A Universal Panel with pre-drilled holes and a 3-hole grid at anchor level, can be delivered in
every height.
57
5
57
5
15
50
27
00
33
00
57
5
57
5
60
0
47
5
10
75
30
12
00
83
7
33
3
Universal Panel
galvanized
Height Width Weight
Article
TriTec-TTM-Universal Panel 330cm 72cm 138,00 kg 020082
TriTec-TTM-Universal Panel 270cm 72cm 107,50 kg 030082
TriTec-TTM-Universal Panel 120cm 72cm 72,50 kg 040082
11
WALL THICKNESS COMPENSATIOR
� is used to adjust the wall thickness in 5, 6 and 10 cm
Height Width Weight Article
Wall Thickness Compensator 330/5 steel 330 5 20,10 kg 020099
Wall Thickness Compensator 330/6 steel 330 6 21,40 kg 020098
Wall Thickness Compensator 330/10 alu 330 10 15,70 kg 020097
FOUNDATION TIE CLAMP ART.NO: 060246
� is mounted at the profile, and secured with a bolt
� in connection with the perforated belt, the elements are firmly an-
chored, so that a shift is prevented
� the perforated band clamps holding the hole band voltage
TRITEC®
-Accessories
FOUNDATION STAP ART.NO: 060247
� foundation stap as connection for composed elements
with 6 cm edge profile
Alu
Height Width Weight Article
Wall Thickness Compensator 270/5 steel 270 5 16,20 kg 030099
Wall Thickness Compensator 270/6 steel 270 6 17,20 kg 030098
Wall Thickness Compensator 270/10 Alu 270 10 12,70 kg 030097
Height Width Weight Article
Wall Thickness Compensator 120/5 steel 120 5 7,61 kg 040099
Wall Thickness Compensator 120/6 steel 120 6 8,09 kg 040098
Wall Thickness Compensator 120/10 Alu 120 10 5,90 kg 040097
steel
12
TRITEC®
-Accessories
FORMWORK CLAMP APC LONG, ART.NO.: 011502
� straightens and draws all panels together
� secured and aligned
� galvanized
� only one formwork clamp for all panels compensating up
to 26 cm
COMPENSATION WALER TTR 90, ART.NO.: 060030
� universally operational waler made of high-quality steel
� bridges length adjustments
� increases rigidity in the inter-panel connection
� transfers anchor strength
� The walers are fastened onto the integrated track on the
panels. The necessary anchor holes for this, are integrated
in grid- like manner on the panels
FORMWORK CLAMP APC, ART.NO.: 060040
� straightens and draws all panels together
� secured and aligned
� galvanized
� only one formwork clamp for all panels compensating up to
12 cm
13
SCAFFOLDING BRACKET, TTW 80 ART.NO.: 060010
TTW 120 ART.NO.: 060011
� for the assembly of a secure 80 or 120 cm wide working plat-
form
� simply fasten to the vertical or horizontal panel
� high quality powder coating, on request
available in galvanized
TRITEC®
-Accessories
LIFTING HOOK 1,5 T, ART.NO. 060170
� to transport the vertically hanging panels
� certificated carrying load: 1,5 t
� top quality powder coating
LIFTING GEAR, ART.NO.: 060210
� for loading and unloading, as well as the movement of complete formwork packages
SCAFFOLDING BRACKET TTW 100 TWO PARTS ART.NO.: 060012
� for the assembly of a secure 100 cm wide working plat-
form
� simply fasten to the vertical or horizontal panel
� galvanized
14
PUSH-PULL PROPS
� erection aid
� allows for the simple adjustment of wall and column
formwork
� absorbs wind force
Typ extension range
PPS I 2,05 bis 2,95 m
PPS II 2,91 bis 3,80 m
PPS III 4,60 bis 6,00 m
Kicker PPS I 1,08 bis 1,40 m
Kicker PPS II 1,28 bis 1,90 m
Kicker PPS III 2,05 bis 2,94 m
Article
060140
060070
060150
060160
060080
060180
Weight
18,00 kg
22,10 kg
38,80 kg
5,20 kg
13,10 kg
17,00 kg
TRITEC®
-Accessories
� The Push-Pull Prop is attached to the panel
with the Brace Connector (Art. No. 060060)
spindle adjusting aid
15
TRITEC®
-Accessories
TIE RODS DW 15
� supplied in four standard lengths, additional lengths
are available upon request
� max. permissible load of the tie rod DW 15 and
DW 20 are according to DIN 18216
� WING NUT PLATE DW 15 (Art.No. 060100)
� fixed the tie rod
16
TRITEC®
- Column Formwork TTS
TRITEC ® AS COLUMN FORMWORK
� TriTec Column Panels are able to form and concrete columns, starting with a gird from 5 cm
reaching up to cross-sections of 75x75 cm. The panels are connected with the TriTec TTS
Column Tie Bolts and fastened with Wing Nuts. Unnecessary anchor holes are sealed off with
plugs.
Height Width Weight Article
TriTec-TTS Column Formwork 330 330 cm 90 cm 172,00 kg 090010
TriTec-TTS Column Formwork 270 270 cm 90 cm 142,00 kg 090020
TriTec-TTS Column Formwork 120 120 cm 90 cm 70,50 kg 090030
TriTec-TTS Column Formwork 60 60 cm 90 cm 40,50 kg 090050
TriTec-TTS Brace Connector 0,65 kg 090040
Plug TTS 0,004 kg 099180
17
TRITEC®
-special panels and special colours
TRITEC® SPECIAL PANELS
� GHI is the contact person if you need special sizes. Some special sizes are already integrated in the
range. On request, we can of course make any other size.
� Prices on request.
TRITEC® SPECIAL COLOURS
� Give your items a personal touch. We offer a powder coating in all RAL colours.
� Price on request
120/20
120/40
120/45
120/50
120/55
18
TRITEC®
- galvanized
19
TRITEC®
- galvanized
20
TRITEC®
- production
21
TRITEC®
- production
22
TRITEC®
in use at a
23
construction site in Saudi Arabia
24
TRITEC®
in use construction site in Switzerland
25
TRITEC®
in use special elements 270 x 180; Belgium
26
PLANNING ▪ LOGISTICS ▪ SERVICE
Prompt quotations and comprehensive advice
CAD planning, production of formwork plans
Swift, on-time, reliable delivery– worldwide
We take complete charge of logistics and storage
Training and instructing your personnel on site
Cleaning, maintenance and repairs using new original
parts
Contact / Manufacturer