Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
TRIM MOULDING
TRIM MOULDING
03AZEK.com02
We know you take great pride in your home. We know you want nothing but the best. AZEK Building Products are engineered to withstand the test of time, and designed to last beautifully.
AZEK Trim and Moulding offer the highest performing wood replacement line of PVC products available in the market. We understand quality, longevity and durability, so we designed our trim and moulding products to not split, crack or rot...allowing you to spend more time enjoying life’s finer things instead of worrying about maintenance.
Whether you are relaxing in your outdoor haven, or entertaining party guests, you can rest as-sured knowing that AZEK Building Products will take your home to a whole new level of elegance and sophistication.
TRIM
05AZEK.com04
AZEK Trim, offers an unequaled combination of uniformity, durability, workability and beauty. AZEK Trim is available in trim, sheets, cornerboards and beadboard, as well as other unique trim products that help solve common construction challenges.
AZEK TRIM — #1 BRAND IN TRIM
Look & Feel of Real Wood
Durable & Long Lasting
Low Maintenance
Can be Worked Similar to Wood - Even Mitered, Routed & Turned on a Lathe
Can be Heat Formed for Eye-Catching Curves
25 Year Warranty
Building Code Report(ESR-1074)
AZEK Trim... Best-in-Class
06
Most AZEK Trim products are available in either the Traditional or Frontier finish.
TRADITIONAL Natural, semi-matte white surface
Available in board, cornerboard, beadboard, AZEK to Mill, sheets, Finish Grade Trim, Universal Skirt Board, Integrated Drip Edge and Column Wrap
FRONTIER Rustic Texture
Reversible - Traditional on one side and Frontier on the other
Available in board, cornerboard, Integrated Drip Edge, and Universal Skirt Board
07
Beauty
Semi-matte White Finish White Color Throughout Profile Maintains Its Color Without Protection Readily Accepts Paints
Durability
Never Requires Paint for Protection Will Not Rot, Cup, Split, Twist or Warp Moisture and Insect Resistant Suitable for Ground/Masonry Contact 25-Year Limited Warranty
Workability
Use Standard Woodworking Tools Can be Milled, Shaped and Moulded Can be Heat Formed for Curved Applications Fasten Close to Edge Without Splits Can Rout or Cut without “Chip Outs”
Uniformity
Consistent Density Square Edges No Waste, Every Inch Usable
AZEK.com
WHY IS AZEK TRIM THE #1 BRAND OF TRIM?
• Over 25 years of cellular pvc manufacturing experience.
• State-of-the-art manufacturing facilities.
• Confidence of a Building Code Report ESR-1074.
• Maintains a “like new” appearance even in the harshest of weather conditions.
• Made in America, AZEK Trim uses high quality ingredients to create boards you'll be proud to have on your home.
5/8 x Thickness
Actual Lengths
5/8" x 3 1/2" 12' and 18'5/8" x 5 1/2" 12' and 18'5/8" x 7 1/4" 12' and 18'5/8" x 9 1/4" 12' and 18'5/8" x 11 1/4" 12' and 18'5/8" x 15 1/4" 12' and 18'
4/4 x Thickness
Nominal Actual Lengths
1 x 2 3/4" x 1 1/2" 18'1 x 4 3/4" x 3 1/2" 12' and 18'1 x 5 3/4" x 4 1/2" 12' and 18'1 x 6 3/4" x 5 1/2" 12' and 18'1 x 8 3/4" x 7 1/4" 12' and 18'1 x 10 3/4" x 9 1/4" 12' and 18'1 x 12 3/4" x 11 1/4" 12' and 18'1 x 16 3/4" x 15 1/4" 12' and 18'
5/4 x Thickness
Nominal Actual Lengths
5/4 x 4 1" x 3 1/2" 12', 18', and 20'5/4 x 5 1" x 4 1/2" 12', 18', and 20'5/4 x 6 1" x 5 1/2" 12', 18', and 20'5/4 x 8 1" x 7 1/4" 12', 18', and 20'5/4 x 10 1" x 9 1/4" 12', 18', and 20'5/4 x 12 1" x 11 1/4" 12', 18', and 20'5/4 x 16 1" x 15 1/4" 12', 18', and 20'
6/4 x Thickness (Frontier Only)
Nominal Actual Lengths
6/4 x 4 1 1/4" x 3 1/2" 20'6/4 x 6 1 1/4" x 5 1/2" 20'6/4 x 8 1 1/4" x 7 1/4" 20'6/4 x 10 1 1/4" x 9 1/4" 20'6/4 x 12 1 1/4" x 11 1/4" 20'
Finish Grade Trim*
Nominal Actual Lengths
6/4 x 4 1 1/4" x 4" 18'6/4 x 6 1 1/4” x 6” 18’3" x 3" (Miter Key Corner Reinforcement)
0908
AZEK Finish Grade Trim* (Traditional Only)
Two-piece trim system installs
quickly and easily, saving
time and labor costs while
providing a beautiful, smooth,
fastener-free trim surface. No
need to fill, paint and sand nail holes. Perfect for door
and window surrounds, but could be used in nearly any
trim application.
Base plate can be quickly and securely face nailed.
Then the cover trim fits neatly over the base trim and
includes a nailing flange to eliminate visible fasteners.
* Patent Pending†Traditional only
Universal Skirt Board*
Nominal Actual Lengths
5/4 x 6 1" x 5 1/2" 18'5/4 x 8 1” x 7 1/4” 18’5/4 x 10 1” x 9 1/4” 18’
AZEK Universal Skirt Board*
Providing the perfect
transition between the siding
and trim, as well as assisting in
water management, the two
piece Universal Skirt Board
includes a reversible trimboard
that is routed to accept a proprietary
universal siding interface.
Unlike other skirtboards, AZEK Universal Skirt Board
will work equally well with a variety of siding products
including fiber cement, vinyl, cedar shingles or wood.
The AZEK Universal Skirt Board reduces labor, saves
installation time and costs, and replaces the need for
starter strips. It is perfect for use where water tables are
not needed or desired.
11⁄2" nailing flange length1⁄4" drip edge overhang
AZEK Trim (Traditional & Frontier)
Trim that is easy to work with
and offers long lasting
durability, AZEK Trim is the
perfect replacement for wood
in all non-stress and non-load
bearing applications. It can be
easily milled, routed, and heat
formed for custom looks. AZEK Trim doesn’t require
paint for protection, but can be easily painted for
aesthetics.
25-Year Limited WarrantyAZEK’s Warranty
• Perfect for ground contact applications
• Impervious to moisture and insects
• Does not require paint for protection
• Can be heat formed for unique designs
• Building code listing ESR-1074
With the AZEK Edge
• Precise, sealed edges on all 4 sides (S4S)
• Stays cleaner in the lumberyard and job site
• Tight board tolerances
• Easier to clean if it does get dirty
With unparalleled quality, AZEK Trim products are backed by a proven track record of performance that tops all competitors. For a trim product that will offer years of lasting good looks, choose AZEK Trim.
AZEK Sheet
Actual Lengths
3/8" x 4'* 8' and 10'1/2” x 4'* 8’ and 10’5/8” x 4’ 8’, 10’ and 18'3/4” x 4’ 8’, 10’, 12' and 18'1” x 4’ 8’, 10’, 12’ and 20’
10
AZEK Sheet (Traditional)
Perfect for bay windows,
dormers and raised panels.
Applications over 16" wide
are easy.
AZEK Adhesive
Container Size
4 oz. 32 oz.8 oz. 128 oz.16 oz. 5 Gal. (640 oz.)
AZEK Adhesive Water-based, non-toxic, easy
to clean-up adhesive that is
perfect for AZEK to AZEK
adhesion. Glued joints will
never open.
* 3/8" and 1/2" sheet product is not intended to be ripped into trim pieces. These profiles must be glued to a substrate and mechanically fastened. Contact your AZEK Territory Sales Manager with questions.
AZEK Rabbeted Cornerboard and Trim (Traditional and Frontier)
With rabbeted edges, the
one-piece AZEK Rabbeted
Cornerboard is designed to ease
siding installation and deliver a
crisp, clean trim facade. AZEK
Rabbeted Trim also eases installation for a clean finish.
Rabbeted Cornerboard
Nominal Actual Lengths
5/4 x 4 1" x 3 1/2" 10' and 20'5/4 x 6 1” x 5 1/2” 10’ and 20’5/4 x 8 1” x 7 1/4” 10’ and 20’(Traditional Only)
Rabbeted Trim
Nominal Actual Lengths
5/4 x 4 1” x 3 1/2” 18'5/4 x 6 1” x 5 1/2” 18’5/4 x 8 1” x 7 1/4” 18’
AZEK Trim and AZEK Mouldings should be installed using the same good building principles used to install wood or composite trim and mouldings and in accordance with the local building codes and estab-lished installation guidelines. AZEK Building Products Inc. claims no liability or responsibility for the improper installation of this product.
AZEK Trim and AZEK Moulding may not be suitable for every application and it is the sole responsibility of the installer to be sure that AZEK Trim and Mouldings are fit for the intended use. Since all installations are unique, it is also the installer’s responsibility to determine specific requirements in re-gards to each trim application. AZEK Building Products recommends that all applications be reviewed by a licensed architect, engineer or local building official before installation.
Technical information and AZEK Trim and Moulding Installation Guide-lines are available online at www.AZEK.com or from your local AZEK Dealer. If you have any questions or need assistance, please call AZEK Customer Service at 877-ASK-AZEK (877-275-2935) or visit www.AZEK.com.
* Patent Pending†Traditional only
AZEK Cornerboard (Traditional and Frontier)
With a seam that will not open,
AZEK Cornerboards offer time
savings during installation
while providing an upscale
look. Available in Traditional
and rustic Frontier in 10'
and 20' to complement any
housing exterior.
5/4 x Thickness
Nominal Actual Lengths
5/4 x 4 1" x 3 1/2" 10' and 20'5/4 x 6 1" x 5 1/2" 10’ and 20’
6/4 x Thickness
Nominal Actual Lengths
6/4 x 4 1 1/4" x 3 1/2" 10'6/4 x 6 1 1/4" x 5 1/2" 10'
AZEK Column WrapEasy to install, 3-Plus-1 column
wrap profile saves time and
installation costs. Three
connected panels and a fourth
“locking” panel fit easily
around a structural support
with press fit seams and nicely
finished corners. AZEK Column
Wrap is available in the Traditional finish.
Column Wrap
Nominal Actual Lengths
4 x 4 3 3/4" x 3 3/4" 10'6 x 6 5 3/4” x 5 3/4” 10’8 x 8 7 3/4” x 7 3/4” 10’
AZEK to Mill (ATM)Perfect for use as a fabrication
component due to its thicker
profile. The consistent density
and solid color offer a superior
product for milling operations.
AZEK to Mill (ATM)
Actual Lengths
1 1/4" x 9 1/4" 18'1 1/4” x 48” 8’
Beadboard
Nominal Actual Lengths
5/8 x 4 5/8" x 3 1/2" 18'1/2 x 6 1/2” x 5 1/2” 18’
AZEK BeadboardReversible Beadboard profile
with edge/center bead on one
side and v-groove on the other
side. This design offers
flexibility when planning your
project. Perfect for
wainscoting and porch ceiling.
1/2" Beadboard has a nailing
flange for easier installation.
AZEK Integrated Drip Edge*
Trim product designed to
assist with water management
efforts around window and
door surrounds. The two
piece product, which includes
a reversible trimboard, is
routed to accept a drip edge designed to help channel
water away from the window or door surround. For
easy installation, the drip edge has an integrated nailing
flange to reduce labor and installation costs.
11⁄4" nailing flange
1⁄8" drip edge overhang
Integrated Drip Edge*
Nominal Actual Lengths
5/4 x 4 1" x 3 1/2" 18'5/4 x 6 1” x 5 1/2” 18’
11
All photos contained in this brochure are for display purposes only and not for the purpose of validating the suitability or safety of any particular in-stallation or application of the product. Always consult AZEK’s Installation Instructions as well as local building codes to ensure proper installation.
12
MOULDING
13AZEK.com
AZEK Mouldings are available in many of the most popular moulding profiles. AZEK products are known for longevity and durability and won’t split, crack or rot. They can be installed using traditional tools and fasteners and, for custom applications, most AZEK Moulding prod-ucts can be heat formed to create eye-catching curved moulding details.
AZEK MOULDING — THE PERFECT COMPLEMENT TO AZEK TRIM
Durable & Long Lasting
Moisture Resistant
Insect Resistant
Available in Most Popular Profiles
Low Maintenance
Perfect for Ground Contact Applications
25 Year Warranty
Does Not Require Paint for Protection
AZEK Moulding
14
• Same color, look and feel as AZEK Trim
• Crisp, authentic architectural details
• Increases stability/predictability and minimizes expansion/contraction when fastening
• No painting required, yet easy to paint if a custom color is desired
• UV protection inside and out
• Uniform material minimizes chip outs on cut lengths
• One warranty covers all products
• No cupping, rotting or splitting
• Most can be heat formed to create curved moulding details
• Installed with similar tried-and-true installation methods as traditional wood mouldings
• Standard AZEK Installation Guidelines will apply to AZEK Mouldings
• Use AZEK Adhesive for "welding" AZEK to AZEK surfaces and eliminate joints
15
THE AZEK DIFFERENCE...
The best looking, highest performing wood replacement line of mouldings available in the market - AZEK Moulding. You will be proud to show off your beautifully designed space now, and for years to come.
17CASING PROFILES
Casing profiles are decorative mouldings
typically used flush against a wall, door or
window to create surrounds.
Adams CasingAZM-97
1 1/16"
3 1/2"
17/32"
Back BandAZM-6931
3/4"1 11/32"
1 3/16"
Rake MouldingAZM-287
1 1/16"
2"Brick MouldAZM-180
1 1/4"
2"
Base CapAZM-164 1 1/8"
11/16"
Square ProfileAZM-236
1 1/2"
1 1/2"
Shingle MouldAZM-210
11/16"
1 5/8"
Band MouldingAZM-217
11/16"
1 5/8"
Garage Door ThermostopAZM-6936
3/8"
2"
Fluted / ReededAZM-606
5 1/2"
15/16"
Crosshead PedimentAZM-6216
7 1/8"
1"
213/32"
Wainscot CapAZM-284
1"
1/2"
2 1/4"
Colonial Base CapAZM-163
5 1/4"
3/4"AZEK.com
16 CROWN PROFILES
Crown moulding profiles are typically decorative
mouldings designed for use along the intersection of
a wall and ceiling. May be combined with other mould-
ings to create a “built-up” profile.
4" CrownAZM-49
3 5/8"
9 /16"
3" CrownAZM-52
2 3/4"
9 /16"
6" CrownAZM-45
5 1/4"
11 /16"
5" CrownAZM-47
4 5/8"
11 /16"
Rams CrownAZM-6934
1 13/32"
2 1/16"
DETAIL & SILL/DRIP PROFILES
Drip Cap is typically used as a water
table or brick ledge for separation
and water shed against two differ-
ing material types. Sill profiles shed
water and offer architectural detail.
ScotiaAZM-93
3/4"
3/4"
Quarter RoundAZM-105
3/4"
3/4"
Drip CapAZM-197
11/16"
1 5/8"
Water Table AZM-6935
2 3/4"
2"
1 3/4"
2 1/32"
Historic SillAZM-6930
Sub Sill NoseAZM-6933
1 17/32"
1 1/2"
1 3/8"
©2013 AZEK Building Products
8" Crown AZM-43
7 1/2"
1"
3 1/2" Bed MouldingAZM-28
Cove MouldingAZM-80
4 1/4"
3 /4"
Bed MouldingAZM-75
1 3/4"1 3/4"
9/16"
3 1/2"
13 /16"
Imperial Rake CrownAZM-6937 2 3/4"
1 3/8"
UNIFORMITY
Consistent Density
Square Edges
No Voids
No waste, every inch usable
Premium lengths, no upcharge
Contains no known carcinogens
DURABILITY
Never Requires Paint for Protection
Will not rot, cup, split, twist or warp
Impervious to Moisture and Insects
Suitable for Ground/Masonry Contact
25 Year Warranty
Handles easily without breakage
WORKABILITY
Use Standard Woodworking Tools
Can be Safely Milled, Shaped, and Molded*
Can be Thermoformed
Fasten Close to Edge Without Splits
Can Rout or Cut without “chip outs”
Never requires painting to retain warranty
BEAUTY
Semi-matte White Finish
White Color Throughout Profile
Maintains Original Color Without Protection
Readily Accepts Paints and Stains
Complements all Housing Exteriors
Can be crafted for unique applications
EXTRAS
Experienced “Direct” Sales Force
National PR and Ad Campaign
Dealer Referral System
Dealer Training Program
Available in Trimboards, Sheets,Cornerboard, and Beadboard
Special solution profiles available
Fiber Cement
TrimPoly-Ash
Trim
Vinyl/Aluminum Coil Wrap
Engineered/Hardboard
TrimAZEK®
TrimWoodTrim
All products meet criteria Some products meet criteria * Without the need for special safety equipment.
Our Family of Products
AZEK DECK
AZEK TRIM & MOULDING
AZEK RAIL
AZEK PORCH
AZEK PAVERS
TIMBERTECH DECK
TIMBERTECH FASTENING
TIMBERTECH LIGHTING TIMBERTECH RAIL
18
DISCOVER THE AZEK DIFFERENCE
MAKE YOUR LASTING IMPRESSIONAZEK BUILDING PRODUCTSWITH
AND
19
AZEK Building Products, Inc.888 North Keyser Avenue • Scranton, PA 18504www.AZEK.com • (877) ASK-AZEK(877) 275-2935
Thank you for considering AZEK Trim and AZEK Moulding. Before purchasing, please visit www.AZEK.com for detailed installation and product use information.
LIT-ATM 06/14