Upload
phamhuong
View
216
Download
3
Embed Size (px)
Citation preview
TC
Tried simplicity, proven performance and high comfort
• New naming– TC4 : 4 straw walkers
– TC5 : 5 straw walkers
• New T4.90– High spec 4 straw walkers
• Harvest Suite Comfort Cab
• Remote threshing drum concave
• Double cascade cleaning shoe
• Bigger clean grain
• Bigger grain tank, from 4000 to 5000 litres
• NEF engine 6 cylinder, Tier4a
– Many options:
• Rotary separator
• SmartSieve™ with Opti-Fan™
• Moisture sensor
• 2013: 50000th TC built
TC – Models Line-up
TC, What’s new 2015?
MY 2014 MY2015
TC5040 Tier 3 TC5040 Tier 3
TC5050 Tier 3 TC4.90 Tier 3/4A
TC5060 Tier 3 TC5.70 Tier 3/4A
TC5070 Tier 3/4A TC5.80 Tier 3/4A
TC5080 Tier 3/4A TC5.90 Tier 3/4A
TC5080 HS Tier 3/4A TC5080 HS Tier 3/4A
TC – Models line-up
A brand new range
TC5040(mechanical)
TC4.90 TC5.70 TC5.80 TC5.90TC5080 Hillside
Header width(m)
High cap / VF HD
3,96 – 5,18/
N/A
3,96 – 5,18/
N/A
3,96 - 5.18/
N/A
3,96 - 6.10/
4,90 - 5,50
3,96 - 6.10/
4,90 - 5,50
3,96 - 6.10/
N/A
Nber of straw walkers 4 5
Cleaning area under
wind control3,27m² 3,47m² 4,32m²
Engine type
(displacement)
NEF (6,8 l)
Mechanical
NEF (6,8 l)
Mechanical
NEF (6,8 l)
Mechanical
NEF (6,8 l)
Common
Rail
NEF (6,8 l)
Common
Rail
NEF (6,8 l)
Common
Rail
Power at 2100 RPM
(hp [CV]/kW)170/125 170/125 170/125 207/152 241/177 238/175
Power at 2000 RPM
(hp [CV]/kW)175/129 175/129 175/129 231/170 243/179 258/190
Grain tank capacity
(liters)4000 5000 5200 6400 5200
Type of cab Standard Harvest Suite™ Comfort Cab Standard
TC – Feeding
Fit all header types
• Manual control– Three accumulators = pneumatic compensation
– Pressure and stubble height read thanks to a manometer and a mechanical gauge
• Controlfloat™ technology– This configuration offers automatic header
height control for headers in flat areas.
– This system offers four working modes:
• Manual, used for road transportation
• Stubble height based on elevator angle, mostly used in rape or maize
• Selected height based on the skids position for all normal standing crops
• Pressure compensation for laid crops
• Autofloat™II system– Allows the header to stay perfectly parallel to
the ground even in strong rolling area.
– AutoFloat = Controlfloat + Lateralfloat
– This system offers the same four modes as Controlfloat
TC – Feeding
Header height control
Systems ManualControl-
float™
Auto-
float™II
TC5040 Standard N/A N/A
TC4.90 N/A Standard N/A
TC5.70 N/A Standard N/A
TC5.80 N/A Standard Option
TC5.90 N/A Standard Option
• Up/down hill control– Senses the combine’s angle of ascent or descent and automatically adjusts the hydraulic pressure of the
header lift system
• AutoFloat I: Delta pressure (∆ P) varies: • Downhill ∆ P becomes too small, header tends to lift out of the crop
• Uphill ∆ P becomes too big, header tends to bulldoze.
• AutoFloat II: Delta pressure (∆ P) is maintained constant.• At flat, downhill or uphill harvest the header maintains the same pressure on the ground.
TC - Feeding
AutoFloat™II, For all terrain
TC – Threshing and separation
Threshing system on demand
• Stones eliminated thanks to the drum inertia
– The stones are pushed by the drum slats in the V shape stone trap .
– The stone trap: is the ultimate protection for the threshing system.
• Stone trap easy access– Easy and fast cleaning of stone trap with
“over-centre” lever
– Self cleaning V-shaped stone trap: thanks to the ‘Cleaning Assist Tube’
• Access to the grain pan– This access is useful especially during the
maize season to clean the grain pan from the front
TC – Threshing and separation
Threshing system well protected from stones
• Best in class threshing drum– Heavy and large diameter (606mm)
• Allows for larger quantity of crop to be harvested
– More inertia
• High resistance of peaks of load
• Less force applied on driveline
• Regular crop flow
• Concave clearance remote control– Easy control from cab of the drum/concave
clearance
– Clearance Indicated on the monitor
• Wrap angle 111°– Important friction area:
• TC 4 : 0,62m²
• TC 5 : 0.79m²
TC – Threshing and separation
High diameter threshing drum
TC 4 TC 5
Drum concave 0,62m² 0,79m²
Beater concave 0m² 0m²
Straw-walkers 4,41m² 5,51m²
TC – Threshing and separation
WITHOUT Rotary separator
• High straw quality even in dry conditions
– The perfect solution in dry and gentle straw conditions
– Big diameter threshing drum for optimal straw quality
– Beater for transition to straw walkers and gentle treatment of straw
• Closed bottom straw-walkers– Long straw walkers with a steep slope and 6
steps for optimal separation
– More rigidity thank to the structure of the SW
– Separated grain remain on the same side even in lateral slope, the grain is evenly spread over the grain pan;
• Threshing and separation area:
• +20% capacity – Maximise the separation capacity
• Efficient even in the worth conditions.
• Adjustable Rotary Sep. concave– Upper position: maximum capacity
– Lower position: brittle straws or rapeseed
• Two RS speeds– 390 rpm: Rapeseed, sunflower, maïs
– 740 rpm: Cereals
TC – Threshing and separation
WITH Rotary separator (Not Available on TC5040 and TC5050)
Threshing and
separation areaTC 4 TC 5
Drum concave 0,62m² 0,79m²
Beater concave 0,16m² 0,2m²
RS concave 0,66m² 0,83m²
Straw-walkers 3,74m² 4,68m²
TC – Cleaning
The cleanest grain sample around!
• Long grain pan – Increase the density sorting
• Lighter material on top
• Heavier material below
– Material perfectly prepared to the cascade
• Alternated sieves movement– Avoid crop building up over sieve (especially in
barley)
• Sieve area– 3,27m²
• TC –
Cleaning
TC – Cleaning
TC5040: Single cascade cleaning system
• Double cascades under wind control
• 20 to 40% of grain clean from the pre-sieve
• Long upper sieve
• Fixed or SmartSieve™
• Optional sieve opening remote control
TC 4 TC 5
Sieve area
under wind
control3.457m² 4,321m²
TC – Cleaning
The right cleaning area
• Sieve opening remote control – Optional on TC5060, TC5070 and TC5080
– The upper and lower sieves can be controlled from to different locations:
• From cab on the RHS console
• Directly from the rear of the combine
– The sieve opening value appears directly on the InfoView™II monitor
TC – Cleaning
Cleaning process controlled at your fingertips
• Efficient in side slopes up to 25%
• Upper shoe movement– Pre-sieve
– Upper sieve
• Linear movement of the sieves– On level ground, the sieves move in-line with
the combine chassis behaving just like a fixed cleaning shoe
• Grain kernel size correction– Depending on the fan rpm, the side
movement is more or less aggressive
– The optimal levelling correction is obtained by taking these two elements into account
• The weight of the grain is define thank to the cleaning fan rpm with three speed ranges
• The side slope is determinate by the inclinometer located in the cab
TC – Cleaning
SmartSieve™ technology efficient up to 25% side slope
• Higher performance in rolling fields (Only on SmartSieve cleaning shoe)– When longitudinal slope changes, fan rpm is adapted with a delta in direct relation to the change in
slope
• Fan rpm is automatically increased when driving downhill to avoid cleaning system overload and improve the grain sample quality
• Fan rpm is automatically reduced when driving uphill to avoid grain losses
– Result: Opti-Fan™ system ensure automatically a constant grain sample quality and cleaning capacity
TC – Cleaning
Fan rpm compensation Opti-Fan™ for longitudinal hills
TC – Grain handling
The right autonomy
• Foldable covers in two parts– On TC5.70, TC5.80 and TC5.80 only
– Easy to operate from the cab platform
– Lower overall height for transport
• Sample trap
• Grain level sensor
• Unload rate of 60l/s
TC – Grain handling
Up to 6400 litres
Models
Grain
tank
capacity
Comp.
to
MY’14
CoversLevel
sensor
TC5040 4000 L = Single 1
TC4.90 5000 L +25% Single 1
TC5.70 5200 L = Single 1
TC5.80 6400 L = Double 2
TC5.90 6400 L = Double 2
TC – Residue management
Long or chopped straw, the choice is yours
• Electro-hydraulic clutch to engage chopper
– The operator just need to:
• Move the lever of the swathing plate (1)
• Press the engagement button on the RHS console to enable or disable the straw chopper
TC – Residue management
Easy switch from swathing to chopping
1
• Adjustable rakes– The rakes on each side can be adjust
• The windrow width can be change according to the amount of straw
• Easy setting
• Optional chaff spreader– Spread the straw on the full header width
• Avoid excessive chaff volume under the straw windrow
• Improve the start of the following crop especially when the plough is not used.
– The chaff spreader can be moved backward to get an easy access to the sieves
TC – Residue management
Swathing mode
• Efficient chopping – Space between knives 25mm
– Two speeds available : 2400 – 3400 rpm
• Lateral wind compensation – Available as an option
– Straw deflectors controlled from cab
– The chopped straw is evenly spread
• Dual-Chop™ rake– Installed into the straw chopper from factory
– Finer cut without extra fuel consumption
TC – Residue management
Straw chopping mode
TC – Engine and drives
Simply reliable
• TC – Engine
and drives
TC5040 TC4.90 TC5.70 TC5.80 TC5.90
Fuel
tank
capacity
300L 400L
AdBlue®
tank
capacity
N/A 70L
TC – Engine and drives
Two engine technologies
• TC5040– Engine NEF 6,8 litres displacement
– Mechanical governor
– Internal gas recirculation system
• TC4.90, TC5.70, TC.80 and TC5.90– Engine NEF 6,8 litres displacement
– High pressure common rail injection
– Optional air compressor available
• Diff Lock– Optional on TC5.80-TC5.90
– Improved the ground drive in difficult area (hilly fields, humid area…)
– The operator has to push the pedal down to engage the system when the combine starts slipping
TC – Engine and drives
Ground drive transmission
TC5040 TC4.90 TC5.70 TC5.80 TC5.90
Gearbox 3 speeds ZF 3 speeds ZF 3 speeds ZF 3 speeds NH 3 speeds NH
Hydro pump N/A 75cc 75cc 75cc 100cc
Hydro motor N/A 75cc 75cc 75cc 100cc
Rim diameter 26 26 26 32 32
TC – Engine and drives
Road mode
TC – Engine and drives
Get access everywhere
TC - Cab
TC5040, everything under control
• Modern designed right hand console
– Remote controls for header, threshing and unloading and chopper, this option allows to remove the lever on the LHS and replace it with electrical cool box
– Header pressure gauge to ensure header responsiveness
– Grain loss indicators for sieves and straw walkers and return level indication to set the combine efficiently during operation
• Main functions located on the Multi Function Lever
– Header up / down, lateral adjustment
– Header and elevator reverse button
– Unloading tube position controls on the Multi Function lever
TC - Cab
TC5040, All controls at your fingertips
TC – Cab
NEW Harvest suite™ comfort, Exclusively on TC5060, TC5070 and TC5080
• TC – Cab
TC – Cab
Cab at the right position and lower noise level
• Low noise level– 74db
• Cab centered on the frame – The steering column is located in the exact
middle of the combine
• Easier for the operator to follow the harvesting operations
• Same visibility on each side of the header
• No vibrations– Cab is linked to the frame with 4 silent blocs
– The concave clearance rod is no longer crossing the cab floor
• Perfect visibility – The cab platform ladder is foldable toward the
front in road mode
– The RHS window provide a great visibility, the grain tank is no longer obstructing the visibility
• InfoView™II
TC – Cab
Harvest suite™ comfort, designed around the operator
TC – Cab
Don’t miss anything
• RHS Console– 1: Threshing engagement
– 2: Header engagement
– 3: Gear shifting lever
– 4: Drum speed setting
– 5: Drum concave clearance setting
– 6: Fan speed setting
– 7: Upper sieve opening setting
– 8: Lower sieve opening setting
– 9: Straw chopper deflectors Adjustment
– 10: Field/road mode
– 11: Straw chopper engagement
– 12: Reel speed proportional to ground speed
– 13: Header width adjustment
– 14: Header height control
– 15: Engine speed setting
• The console is adjustable fore/rearward
– Suit perfectly to the operator
TC – Cab
Functional settings at your fingertips
4 56
78
9
3
21
1011
12
13
14
15
• CommandGrip™ MFH– 1: Header height and Lateralfloat control
– 2: Unloading auger engagement
– 3: Unloading tube opening
– 4: Emergency stop
– 5: Reel speed/header reverser
– 6: Reel Aft/fore position/VariFeed™ cutter bar
– 7: Not used
– 8: HHC Automatic mode engagement
– 9: Shift (Varifeed™/reverser)
TC – Cab
CommandGrip™: controls at your fingertips
4 5
6
7
8
9
3
2
1
TC – Cab
InfoView™II monitor: complete but not complex (1)
Run screens
Combine status screen
Keypad
Gauges:
- Engine cooling
température
- Fuel level
Alarms:
- 25 alarms : shaft speeds,
levels, temperature…
TC – Cab
InfoView™II monitor: complete but not complex (2)
Run screens
Keypad
Combine status screen:
- Grain tank level
- Unloading auger position
- Header height control mode:- Autofloat™
- Stubble height
- Compensation
- Reel (synchronisation mode)
- Transmission - Speed
- Direction (forward/backward)
- Parking brake
- Engine speed
- AdBlue® level
- Functional information- Threshing engaged
- Straw chopper engaged
- Chopping/swathing mode
Warning lights and gauges
TC – Cab
InfoView™II monitor: complete but not complex (3)
Keypad
Run screens:
- Run screen 1:
- Drum speed
- Drum concave clearance
- Cleaning fan speed
- Upper sieve opening
- Lower sieve opening
- Run screen 2:
- Threshing losses (straw w)
- Cleaning losses
- Fan speed
- Returns volume
- Grain moisture rate
- NEW 2015: Auto Diagnostic
Warning lights and gauges
Combine status screen
TC – Cab
InfoView™II monitor: complete but not complex (4)
Increase Decrease
Entrer
Cancel
Eng.
speed/load.
Head. height
Area counter
Losses
sensitivity
SettingsCalibration
Air conditioning /
Moisture sensor
Service
Intervals
Combine Info
Run screens
1/2
Scroll down
Scroll up
Run screens
Combine status screen
Warning lights and gauges
• Suit perfectly to the operator – Column inclination thank to the pedal
– Upper part inclination
– Steering wheel height
• Foot holders– On each side of the steering column
– More comfort for the operator
TC – Cab
Steering column
• Roof top Commands– Radio Bluetooth
– Mirrors
– Lights
– Wipers…
• Air conditioning– Manual
– Manual + heater
– Automatic
TC – Cab
Cab roof control panel
TC – Cab
Easy light control
TC – Cab
A place for everything
TC – Cab
Up to the last detail
TC – Accessories
The difference between a TC and your TC
• Real time moisture sensor– The moisture sensor get the grain sample
from the clean grain elevator
– Moisture is measured continuously
– Moisture rate is displayed on the InfoView™II monitor
• Only one calibration per crop type – Easy and simple to calibrate
– When the grain sample is done, the operator can keep working and come back later on the calibration screen to enter the right value.
TC - Accessories
Integrated moisture sensor
Once the grain sample is
done, the operator can
switch to the run screen
and keep harvesting
Enter directly the right
moisture rate in the
monitor
OR
• Dedicated display RDS Ceres 8000i– CR8000i allows :
• Fields management
• Moisture sensor
• Yield monitor
• Data recording
– The system can be used to collect the field data if connected with the antenna .
• Two versions of precision farming software to meet your needs
– PLM viewer
• Free of charge
• Very simple to start with yield monitoring and mapping of field data
– PLM Office
• Advanced software for complete data management (seeding, spreading…)
• Dedicated customer support included
TC - Accessories
Complete precision farming solutions for those who want more
• EZ Pilot: 100% focused on the machine performance
– Available through the spare parts department
– The electrical motor is located under the steering wheel for a perfect visibility
– Slope compensation three axis (T3 technology)
• The combine follow the line whatever the terrain conditions
– 2 monitors available: FM750, FM1000
– Can be installed on another equipment after the season…
TC - Accessories
EZ pilot, guidance system almost integrated
• PLM ready– Prewired for the Telematics module
• Essential (DIA kit only)– Essential (for all machine kind, older model as
well), can provide the following information:
• Location
• Working status
• Geofencing
• Professional (DIA kit only)– Professional, will be connected to the CAN
network, it will provide the same information as the essential version and in addition:
• Real time virtual display (up to four screens)
• Performance analysis
• Messaging
• mapping
TC - Accessories
You manage your fleet from your office
TC - Summary
Entry level but not low specs
NEW design
Dual-Chop™
SmartSieve™ Double cascade
Opti-Fan™ system
Threshing system
WITH or WITHOUT
Rotary separator
on 4 or 5 straw walkers
AutoFloat™II system
VariFeed™headers
NEW CAB
Harvest Suite™Comfort
InfoView™II Monitor