Upload
dwain-terry
View
225
Download
2
Tags:
Embed Size (px)
Citation preview
TRANSMILLE PATsTRANSMILLE PATsThe New AlternativeTo Fast, Easy & Efficient Portable Appliance Testing
Key Features – 5080 / 6080 PATsKey Features – 5080 / 6080 PATs BATTERY POWERED
TEST ANYWHERE – NO NEED TO FIND A MAINS SUPPLY 25A / 10A / 100mA EARTH BOND CURRENT RANGES TYPICALLY 500 TESTS ON A SINGLE CHARGE
Battery powered testing eliminates time wasted searchingfor a mains socket. Testing canbegin immediately, with nocompromise on bond currentranges – up to 25A is availableon the Transmille PATs.
Battery power is essential forlocations where no mains supplyis available, eg. on-site, instorage containers etc.
Key Features – 5080 / 6080 PATsKey Features – 5080 / 6080 PATs EASE OF USE
1-CLICK TO BEGIN CLASS 1 / CLASS 2 TESTING AUTO PASS/FAIL LIMITS –
IDEAL FOR BEGINNERS & ADVANCED USERS SLIDER CONTROL FOR LEAD LENGTH SELECT EASY TO READ LED BAR GRAPH DISPLAY SMALL & LIGHT, GET INTO THOSE DIFFICULT TO
REACH AREAS
Key Features – 5080 / 6080 PATsKey Features – 5080 / 6080 PATs SPEED OF OPERATION
TIME IS MONEY - 20s TEST TIME FOR MORE TESTS PER HOUR INTELLIGENT OPERATION –
AUTO BOND CURRENT DETECTIONAUTO LIMIT SELECTIONAUTO TEST SEQUENCECLEAR PASS/FAIL INDICATION
Key Features – 5080 / 6080 PATsKey Features – 5080 / 6080 PATs DATA DOWNLOAD FUNCTION
RESULTS OF EACH TEST ARE STORED WITH A UNIQUE NUMBER DATE & TIME IS RECORDED WITH EACH TEST NEW LOCATION FUNCTION ALLOWS USER TO MARK TESTS PER
SITE VISITED COMPLETE TEST DATA STORED, INCLUDING APPLIANCE
DESCRIPTION, VISUAL CHECK, BOND CURRENT, TEST LIMITS AND READINGS
RECORDS UP TO 1000 TESTS USING INTERNAL MEMORY LOW COST, EASY TO USE SOFTWARE AVAILABLE
5080 230V PAT5080 230V PAT
TEST SEQUENCEAPPLIANCE TYPE*VISUAL CHECK*FUSE TESTEARTH BOND @ 25A/10A/100mAINSULATION @ 500V DCLEAKAGE @ 230V AC
DIMENSIONSSize : 280mm x 230mm x 80mmWeight : 1.9kgs
BATTERY POWEREDBATTERY POWEREDWITH DATA DOWNLOADWITH DATA DOWNLOAD
* With download function enabled
6080 110V / 230V PAT6080 110V / 230V PAT
TEST SEQUENCEAPPLIANCE TYPE*VISUAL CHECK*FUSE TESTEARTH BOND @ 25A/10A/100mAINSULATION @ 500V DCLEAKAGE @ 230V AC
IEC / EXT. LEAD TESTWITH 250V/500V TEST VOLTAGE SELECTION
FUSE CONTINUITY CHECKBUILT-IN CALIBRATION CHECK
DIMENSIONSSize : 390mm x 280mm x 110mmWeight : 3.5kgs
BATTERY POWEREDBATTERY POWEREDWITH DATA DOWNLOADWITH DATA DOWNLOAD
* With download function enabled
Transmille PAT SoftwareTransmille PAT SoftwareDownloading Data & Printing ReportsOverview
Main MenuMain MenuThe main menu provides easy selection of the mainfunctions of the software :
Easy 1-Click download of data from the PAT
Select & print report(s)
Print test labels (DYMO printer required)
Configure the PAT
Downloading From PAT – 2 Easy StepsDownloading From PAT – 2 Easy Steps
To connect to a USB port, a Serial to USB converter lead* can be used.
* Available as an option
STEP 1 – STEP 1 – Connect PAT to the ComputerConnect PAT to the Computer
Downloading From PAT – 2 Easy StepsDownloading From PAT – 2 Easy Steps
Click Download Icon
Press anybutton on PAT
Download ProgressDisplayed
When download is complete, the PAT memory can be automatically cleared.
STEP 2 – STEP 2 – Download The DataDownload The Data
Printing Reports – 3 Easy StepsPrinting Reports – 3 Easy Steps
Click Print Report(s)Icon
STEP 1 – STEP 1 – Select ‘Print Report’ IconSelect ‘Print Report’ Icon
Printing Reports – 3 Easy StepsPrinting Reports – 3 Easy Steps
Select a report then click SELECT.
For reports marked ‘?’, setthe name & address of customerthen click SAVE.
STEP 2 – STEP 2 – Select The ReportSelect The Report
The report can be viewed on screen or printed by selecting from the ‘After Save…’ action box.
Printing Reports – 3 Easy StepsPrinting Reports – 3 Easy StepsSTEP 3 – View or Print ReportSTEP 3 – View or Print Report
Installing the Software Installing the Software After inserting the CD, a browser will be displayed.
Click INSTALL to begin and the program and all supportingfiles will be installed.
Running the Software For the First TimeRunning the Software For the First Time
To start the software, select START -> PROGRAM ->Transmille PAT – PATDRS Download & Reporting Software.
The software is supplied with an activation code (inside of CD cover) – this should be entered on the screenshown below :
Entering Your Company / User DetailsEntering Your Company / User DetailsWhen the software is run for the first time, it will ask which COM port will be connected to the PAT.
Company details can also be entered, which will be used toprint on the test reports.
Select a COM port using the drop down list
Enter company name/address
Enter up to 2 user names
This information can be edited at any time using the SETUP function.
Enabling the MemoryEnabling the MemoryIf the software is running for the first time, it will alsoask if the memory should be enabled on the PAT :
Click YES to enable memory
Enabling the memory function sets the PAT to a mode which performs the following actions :
• Displays an appliance list at the beginning of a test
• Displays and stores a label number on completion of a test
• Stores test data to memory, ready for download using the software
Setup Menu OverviewSetup Menu OverviewThe setup menu provides access to the settings storedin the PAT internal memory :
Edit Company InformationChange COM port Set PAT Time & DateSet PAT Label NumberSet Calibration Data – Edit cal date, cal due, serial no. & model no.PAT Memory – Erase & enable memory optionsAbout PAT DRS
TRANSMILLE 5080 / 6080 PATsTRANSMILLE 5080 / 6080 PATs
LOOKING FOR A NEW PAT?LOOKING FOR A NEW PAT?2 QUESTIONS YOU SHOULD BE ASKING…2 QUESTIONS YOU SHOULD BE ASKING…
•HOW FAST CAN I TEST HOW FAST CAN I TEST USING THE PAT?USING THE PAT?
•HOW EASY IS THE HOW EASY IS THE DOWNLOAD SOFTWARE?DOWNLOAD SOFTWARE?
AND COMPARE THE ANSWERS TO THE AND COMPARE THE ANSWERS TO THE TRANSMILLE PATs !TRANSMILLE PATs !
HOW FAST IS YOUR PAT?HOW FAST IS YOUR PAT?
HOW EASY IS YOUR DOWNLOAD HOW EASY IS YOUR DOWNLOAD SOFTWARE?SOFTWARE?