Training & Personnel Australia · RIIRIS301D Apply risk management processes ... Training & Personnel Australia RII30115 Certificate III Surface Extraction ABN: 562 341 875 41 ACN:

Training & Personnel Australia RII30115 Certificate III Surface Extraction

ABN: 562 341 875 41

ACN: 160 957 979

PO Box 1630, Thuringow Central, QLD 4817

[email protected]

www.tpaustralia.com.au

24/7 phone: 1 300 TOP JOB

RTO 41096

Enrolment Form /

RPL Eligibility & LLN Assessment Form

Version: 1.0 | Date: 4 February 2017

RII30115 Certificate III Surface Extraction Enrolment Form v1.0 Page 1

I. Course Information – Visit our website for full details (www.tpaustralia.com.au)

Course Name: RII30115 Certificate III Surface Extraction Units included:

RIIENV201D Identify and assess environmental and heritage concerns

RIIRIS301D Apply risk management processes

RIIWHS201D Work safely and follow WHS policies and procedures

RIICOM302D Communicate workplace information

RIIGOV201D Comply with site work processes/procedures

RIISRM304D Maintain stockpiles

RIIMPO304D Conduct wheel loader operation

RIISAM202D Isolate and access plant

RIIMPO337D Conduct articulated truck operations

RIIMEX302D Assess ground conditions

RIIERR302D Respond to local emergencies and incidents

RIIMP0205D Operate roller /compactor

RIIWHS202D Enter and work in confined spaces

About the Qualification: This qualification reflects the role of employees such as production operators in an open cut mine or quarry, who perform tasks involving a broad range of skilled applications in a varied work context, using some discretion and judgement in selecting equipment, services or contingency measures. Licensing, legislative, regulatory and certification requirements that apply to this qualification can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the qualification.

Fees Under the Certificate 3 Guarantee Program, the Queensland Government will subsidise the majority of the training costs. Students should expect to contribute through a student fee. These fees will subsidise the services required to provide the training and may be paid by the student, an employer or a Job Services Australia (JSA) provider. Non Concessional $100 Concession $50 Concessions to be eligible for a concession, you must hold a health care, pensioner or concession card and/or be of Aboriginal or Torres Strait Islander origin.

II. Candidate Information Surname:

Click here to enter text. Email: Click here to enter text.

Given name/s: Click here to enter text. Telephone:

Click here to enter text.

DOB: Click here to enter text. Mobile:


Gender: Click here to enter text. Work:


Age at time of enrolment:

Click here to enter text. Postal address: Click here to enter text.

Address: City/ Suburb: Postcode:

Click here to enter text. Emergency Contact:

Name: Click here to enter text. Telephone: Click here to enter text. Relationship: Click here to enter text.



Cultural Background:

Where you born in Australia? ☐YES ☐ NO If no, state country of birth: Click here to enter text. City of birth: Click here to enter text.

Are you of: Aboriginal origin? ☐YES ☐ NO Torres Strait Islander Origin? ☐YES ☐ NO

mailto:[email protected]

http://www.tpaustralia.com.au/



ABN: 562 341 875 41

ACN: 160 957 979


[email protected]



RTO 41096

Enrolment Form /




Citizenship: ☐ Australian Citizen

☐ Australian Permanent Resident

☐ Student Visa

☐ Visitors Visa

☐ Holiday Visa

☐ New Zealand Citizen

☐ Temporary Resident Visa

☐ Business Visa

III. Educational & Employment Background Highest level completed at school:

☐ Yr 12 or equivalent





☐ Never attended school

Which year did you complete the school level? Click here to enter text.

Are you still attending secondary school? ☐YES ☐ NO

Which language do you mainly speak at home? ☐ English

☐ Other: Click here to enter text.

Previous qualifications achieved

☐ Bachelor Degree

☐ Diploma

☐ Certificate I

☐ Certificate II

☐ Certificate III

☐ Certificate IV

☐ Advanced or Associate

☐ Other Diploma

Tick which boxes BEST describes your employment situation

☐ Employed full time

☐ Employed part time

☐ Self employed

☐ Employer

☐ Unemployed – seeking fulltime employment

☐ Unemployed – seeking part time employment

☐ Not employed – not seeking employment

Employment Details

Employer: Click here to enter text. Branch: Click here to enter text. Telephone: Click here to enter text.

Do you give consent for a copy of your Statement of Attainment be given to your employer or other external party? ☐YES ☐ NO If yes, please provide details (email address) Click here to enter text.

IV. Suitability assessment Tick which BEST describes your main reason for undertaking this training?

☐ To get a job

☐ For personal interest

☐ Self-development

☐ Develop my existing business

☐ Start my own business

☐ A different career

☐ Better job or promotion

☐ Requirement of my job

☐ Extra skills for my job

☐ To get into another course of study

☐ Other reasons: Click here to enter text.

Disability

Do you consider yourself to have a disability, impairment or long term condition? ☐ YES ☐ NO

☐ Impaired hearing

☐ Physical

☐ Intellectual

☐ Learning Disability

☐ Impaired Vision

☐ Medical Condition

☐ Acquired brain impairment


V. Enrolment Information Course Fee:

$ Click here to enter text. Start Date:

Click here to enter a date.

Payment Methods:

☐ Cash

☐ Invoice

☐ Cash

☐ Credit Card

☐ Ezypay

☐ Gov Fund

☐ Voucher

Delivery Method:

☐ IB = Institution Based

☐ FF = Face to Face

☐ FWB = Flexible Work Based

☐ RPL = Recognition of Prior learning

Payments Received:

$ Click here to enter text. Duration:





ABN: 562 341 875 41

ACN: 160 957 979


[email protected]



RTO 41096

Enrolment Form /




Visit our website for the most current information on courses offered by TPA:

Course information: http://www.tpaustralia.com.au/training-courses/ Certificate III guarantee: http://www.tpaustralia.com.au/certificate-3-guarantee/ Enrolment procedure: http://www.tpaustralia.com.au/training/enrollment/ Student Handbook: http://www.tpaustralia.com.au/training/enrollment/

ENROLMENT AGREEMENT Training and Personnel Australia will provide training and assessment services outlined in the Training and Assessment Strategy and Session Plans* as negotiated with the participant/employer (*attached to this document as Appendix C). Training and Personnel Australia reserves the right to negotiate with participants/employers on a case by case basis and will formalise such negotiated arrangements in writing prior to commencement.

SERVICES Training and Personnel Australia agrees to provide the training outlined in the Training and Assessment Strategy including any arrangements pre-negotiated with the participant/employer. The services can only be successful with full participation of the participant and (where applicable) his/her employer/supervisor. The participant acknowledges this and will make every effort reasonable and possible to complete the training. Should Training and Personnel Australia be unable to complete its responsibilities for the delivery of training, Training and Personnel Australia will work with another provider to continue with the training. Each party agrees that, where applicable, notice of a minimum 2 calendar days must be given by the participant/employer of postponement, cancellation or withdrawal from training to the Training and Personnel Australia RTO Manager. Participants agree that if they intend to seek RPL, they will notify Training and Personnel Australia upon submission of their enrolment form and an application made as soon as practicable after enrolment. FEES, CHARGES & REFUNDS Information on fees and charges have been read and agreed to in accordance with the Fees and Charges Schedule Training and Personnel Australia. Prices for applicable courses can also be found by following this link http://www.tpaustralia.com.au/training-courses/ CANCELLATION Information on cancellation (including applicable refunds) is available in the Training and Personnel Australia Student Information Handbook.

MATERIALS (LEARNING AND ASSESSMENT) TPA Training material and resources are provided at no cost for all units and courses delivered by TPA. However, TPA will charge the

learner as per the below table for the replacement of lost learning materials and resources. This information can be found in the

student handbook.

AGREEMENT ACCEPTANCE The information I have provided in this enrolment form is true and correct to the best of my knowledge. I confirm that I have read understand the Student Information Handbook and Enrolment Agreement. In signing this Agreement, I confirm that I requested enrolment in my chosen course and that Training and Personnel Australia has provided me with sufficient information on the delivery and assessment arrangements for the course. My decision to complete and submit this enrolment form has been completed without coercion. I further confirm that by signing this form, I unconditionally: 1. confirm, accept and agree to bound by, the terms, covenants, and conditions stipulated in

1.1 The student training plan plan (Appendix C) 1.2 Fees, Charges and Refund Policy (Appendix A) 1.3 Student Handbook (Appendix B) 1.4 Indemnity Agreement (Appendix D)

2. Acknowledge and confirm that all information relevant to my training has been provided to me 3. If paying via Direct Debit ", I agree to the total amount approved and to the repayment amount as stated in the "Direct Debit Pre

Application Form" and further more declare this arrangement will not cause me any financial hardship.

Print Name:

Signature:

Date: Click here to enter a date.



http://www.tpaustralia.com.au/training-courses/

http://www.tpaustralia.com.au/certificate-3-guarantee/

http://www.tpaustralia.com.au/training/enrollment/

http://www.tpaustralia.com.au/training/enrollment/




ABN: 562 341 875 41

ACN: 160 957 979


[email protected]



RTO 41096

Enrolment Form /




VI. RPL Eligibility Assessment

General Questions

You may leave these questions blank if:

☐ Unemployed – seeking full time work

☐ Unemployed – seeking part time work

☐ Not employed, not seeking work

My current or most recent industry of employment is:

☐ Agriculture, Forestry and Fishing

☐ Mining

☐ Manufacturing

☐ Electricity, Gas, Water and Waste Services

☐ Construction

☐ Wholesale Trades

☐ Accommodation and Food Services

☐ Transport, Postal and Warehousing

☐ Information Media and telecommunications

☐ Financial and Insurance Services

☐ Rental, Hiring and real estate services

☐ Professional, Scientific and Technical services

☐ Administrative and Support Services

☐ Public Administration and Safety

☐ Education and Training

☐ Healthcare and social assistance

☐ Arts and recreation services


My current or most recent occupation is:

☐ Manager

☐ Professional

☐ Technician or Trade Worker

☐ Community or personal service worker

☐ Clerical or Administrative worker

☐ Sales worker

☐ Machinery operator or Driver

☐ Labourer


Recognition of previous competencies

Have you completed any industry related courses in the past? ☐ YES ☐ NO

If yes, please explain what the course involved. You may be eligible for a credit transfer if you have completed any courses with the same units you are enrolling into. You will be required to supply the original or certified copies of your statement of attainment before a Credit Transfer will be granted.





ABN: 562 341 875 41

ACN: 160 957 979


[email protected]



RTO 41096

Enrolment Form /




Skills / Experience Summary

This section summarises your self-assessment of your existing skills and experiences relevant to the requirements of the units of competency included in this qualification. Please answer this section as truthfully as you can, to ensure we can provide you with the most optimal learning experience suitable to your needs and objectives. Use the following scale to rate your skill level:

0 – No prior relevant learning or work experience 1 – Knowledgeable 2 – Experienced 3 – Expert

In the comment section, provide details of where, how, and when you acquired your relevant knowledge, skills or experience. Provide examples where applicable. Also consider what evidence documents you will be able to provide to demonstrate your relevant skills/experience. See Appendix E for examples of evidence documents.

Skill / Experience 0 1 2 3 Comments

1) RIIENV201D (CORE) - identifying and assessing environmental and

heritage concerns in the Resources and Infrastructure Industries

☐ ☐ ☐ ☐ Click here to enter text.

2) RIIRIS301D (CORE) - applying risk management processes in the

Resources and Infrastructure Industries ☐ ☐ ☐ ☐ Click here to enter text.

3) RIIWHS201D (CORE) - working safely and following WHS policies and

procedures in the Resources and Infrastructure Industries

- sourcing, interpreting, clarifying and applying site safety information

- listening carefully to health and safety instructions and information

- responding to and clarifying information and directions

- carrying out work instructions that complies with WHS policies and procedures

- selecting, wearing and caring for personal protective equipment for all activities that require personal protective equipment

- applying safe lifting and manual handling techniques

- identify and report on WHS issues to appropriate personnel

- recognising and following procedure to respond to alarms

- completing workplace reporting procedures


4) RIICOM302D (ELECTIVE) - locating, interpreting and applying relevant

operational information (research and interpretative skills)

- interpreting and applying common Industry terminology, and interpreting work procedures and processes (technical literacy and communication skills)

- obtaining information on technical working practices





ABN: 562 341 875 41

ACN: 160 957 979


[email protected]



RTO 41096

Enrolment Form /




5) RIIGOV201D (ELECTIVE) - Complying with site work processes/procedures

in the Resources and Infrastructure Industries. - planning and completing task to achieve agreed

outcomes as determined by site processes and procedures

- adjusting performance requirements to comply with processes and procedures

- monitoring and recommending changes to overcome noncompliance with site procedures/standards

- reporting noncompliance of processes and procedures to supervisors

- completing required site documents and reports


6) RIISRM304D maintaining stockpiles in the Extractive and Coal and Metalliferous mining


7) RIIMPO304D - conducting wheel loader operations in the Coal

and Metalliferous mining and Extractive ☐ ☐ ☐ ☐ Click here to enter text.

8) RIISAM202D - isolating and accessing plants in Resources and

Infrastructure Industry ☐ ☐ ☐ ☐ Click here to enter text.

9) RIIMPO337D - conducting articulated haul truck operations in

Civil construction, Coal and Metalliferous mining and Extractive


10) RIIMEX302D - assessing ground conditions in the Resources and

Infrastructure Industries ☐ ☐ ☐ ☐ Click here to enter text.

11) RIIMP0205D - maintaining stockpiles in the Extractive and Coal

and Metalliferous mining confirming and implementing barriers and

signage carrying out inspection of the stockpiles and

surrounding areas dumping and moving stockpile materials removing and dispose of contaminants maintaining stockpile structure and battering

angle conducting basic operational maintenance

including servicing, lubrication and cleaning processing written records and reports


12) RIIERR302D - responding to local emergencies and incidents in

the Resources and Infrastructure Industries ☐ ☐ ☐ ☐ Click here to enter text.

13) RIIWHS202D entering and working in confined spaces in the Resources and Infrastructure Industries


NOTE: RPL only relates to training provided by the RTO. A full assessment is required on ALL occasions in accordance with the Assessors Guide.




ABN: 562 341 875 41

ACN: 160 957 979


[email protected]



RTO 41096

Enrolment Form /




VII. Learning Strategy

Learning Style

What type of Learner are you? What type of support (if any) will assist you to complete this course?

Please tick at least one box: ☐ I learn best by listening

☐ I learn best by doing

☐ I learn best by watching

Please tick whichever is/are applicable: ☐ One on one

☐ Reading and writing

☐ Mathematical

☐ Communication

Past learning experiences

In my past learning, the really good things were:


In my past learning, the things I didn’t like were:





ABN: 562 341 875 41

ACN: 160 957 979


[email protected]



RTO 41096

Enrolment Form /




VIII. Literacy and Numeracy Assessment

This section will determine if you meet the minimum literacy and numeracy requirements to enter this course. This assessment covers ACSF:

Learning at level 3 Reading and writing at level 3 Numeracy at level 2

INSTRUCTIONS: Read the guide below on how to refinish woodwork. Answer the following questions based on the information provided in the article.

HIGH RISK WORK LICENSING

FOR DOGGING INFORMATION SHEET

Adapted from Safe Work Australia

http://www.safeworkaustralia.gov.au/sites/SWA/about/Publications/Documents/947/dogging-hrwl-

information-sheet.pdf

Is a dogger required when using a vehicle loading, bridge or gantry crane?




ABN: 562 341 875 41

ACN: 160 957 979


[email protected]



RTO 41096

Enrolment Form /




Vehicle Loading Crane and Bridge and Gantry Crane HRW licences include the application of load estimation

and slinging techniques to move a load. A licensed operator of a vehicle loading, bridge or gantry crane is

therefore able to make judgements on the load and slinging method and select and inspect the lifting

equipment to be used for the crane they are licensed to operate.

However, the licensed operator cannot direct a vehicle loading, bridge or gantry crane operator in the

movement of a load when the load is out of the crane operator’s view or operate the vehicle loading, bridge

or gantry crane themselves, if the load is out of their view. In these circumstances a dogger is required to

direct the crane operator.

If the load is in view of the crane operator throughout the lift and all the other conditions listed in Table 1 are

met, a competent worker other than the crane operator can sling the load.

Questions 1 to 6 assess your Learning, Reading and Writing Skills against ACSF level 3. Use complete sentences where you are asked to provide a description or an explanation. A minimum score of 3/6 is required**.

1) Briefly explain what the article is about


2) Is a dogger required in the following scenario?

A mobile crane is used to lift beams to the second storey of a building under construction. The beams are dissimilar and various slinging techniques are required. The mobile crane operator cannot see the landing area for the steel beams. No safe work lifting procedures have been documented.


3) Justify your answer in question 2.


4) Is a dogger required in the following scenario?

A factory making aluminium panels uses a bridge and gantry crane to move the panels around the workplace. The panels are always in view of the plant operator. Safe work lifting procedures have been documented and signed off by a competent person. All workers involved in the lift have been trained in the safe work lifting procedures.


5) Justify your answer in question 4.





ABN: 562 341 875 41

ACN: 160 957 979


[email protected]



RTO 41096

Enrolment Form /




6) In your own words, describe what a dogging is.


Questions 7 to 10 (4 questions) assess your Numeracy Skills against ACSF level 2. A minimum score of 2/4 is required**.

7) If a harness can support a maximum weight of 2 tons, will it be able to support the weight of 5 metal beams weighing

200 kilograms each? (1 ton is equal to 907 kilograms)


8) How much will 8 metal beams weigh?


9) 1/3 of all the metal beams are aluminium, and 2/3 are steel. Which pie chart below shows the correct ratios for the

aluminium and steel metal beams?

Aluminium Steel

☐A ☐B ☐C ☐D

10) If there were 30 beams delivered in total, how many beams are aluminium?


**Learners who do not meet the minimum required score for this assessment may require additional support to take

this course. This is in accordance with TPA’s strategies to ensure learners entering the course meet the minimum core

skills requirements to successfully complete the course and meet all its relevant learning objectives. See TPA’s

Additional Support Policy for more information, or ask your enrolment adviser about it.




ABN: 562 341 875 41

ACN: 160 957 979


[email protected]



RTO 41096

Enrolment Form /




IX. Admissions Assessment (Office Use Only) NOTE TO CANDIDATE: This section of the form is to be used by TPA staff to analyse your responses in this form, and confirm that the amount of training specified in the standard session plans included in this course’s training and assessment strategy is sufficient to meet the your learning needs. Please leave this section blank. NOTE TO ADMISSIONS OFFICER: Use this section to document your assessment of the candidate’s responses, and your corresponding recommendations. Use the following guide questions in making your recommendations: If you answer ‘no’ in any of the questions outlined below, write relevant available support or reasonable adjustments that may be offered to the candidate to assist him/her in completing the course.

Guide Question Y/N Learning Support 1) The candidate’s language, literacy and numeracy level is

sufficient to undertake this course successfully ☐ Yes

☐ No Click here to enter text.

2) The candidate’s relevant skills and experiences may be reviewed for assessment via the RPL pathway

Note: if you answer yes, provide details

☐ Yes


3) The standard session plan for this course is suitable to the candidate’s learning and assessment needs.

Note: if you answer no, provide details to assist the trainer/assessor in making reasonable adjustments to the candidate’s learning plan

☐ Yes

☐ No

If adjusting the standard session plan, replace the session plan attached to this document as Appendix C and replace it with the adjusted session plan. Click here to enter text.

4) Candidate requires additional support? Note: if you answer yes, provide details

☐ Yes


5) Has support been requested? ☐ Yes

☐ No

☐ N/A


6) The student’s pre-existing skills and knowledge have been discussed

Note: provide details of discussion

☐ Yes

☐ No

☐ N/A


7) Based on discussions with the student and the outcome of this assessment, does the student have the capacity and capability to complete the qualification?

Note: if you answer no, provide details

☐ Yes


DECLARATION

Following analysis of the evidence and discussion with the student:

The qualification suitable to the student’s needs: ☐ YES ☐ NO

The student is completing some units of competency via RPL: ☐ YES ☐ NO

The student has displayed characteristics that will enable him/her to achieve the qualification within the timeframe

nominated: ☐ YES ☐ NO

The training and assessment strategy specifies the delivery modes and arrangements ☐ YES ☐ NO

The complexity of the qualification and existing knowledge and skills of the student are suitable for the student to

complete the qualification ☐ YES ☐ NO

There is sufficient practice opportunity to enable the student to demonstrate depth and breadth of knowledge and skills

in the timeframe specified ☐ YES ☐ NO

Endorsement: Proceed enrolment? ☐ YES ☐ NO

Endorsed by:

Date Click here to enter a date.

Signature:




ABN: 562 341 875 41

ACN: 160 957 979


[email protected]



RTO 41096

Enrolment Form /







ABN: 562 341 875 41

ACN: 160 957 979


[email protected]



RTO 41096

Enrolment Form /




Revision History

Date Summary of Revision Version No. 4 February

2017 Initial development (ACC) v.1.0

