Training catalogue PaperSchool...Maximum number of participants 5 participants Cost of training € 600 excl. VAT per participant, including certificate and catering Options • Use

Training cataloguePaperSchool

voith.com

Paper Machine ExplorationVirtual Reality TrainingWe offer a virtual reality (VR) training for a paper machine explo-ration. This course will explain where the main components of a paper machine are located and their main functionality.

VR will help participants understand and comprehend by observing and experiencing the complex paper machine and its components. The training will also give an impression of the

size of these complex machines, since the VR system will visualize it accordingly. This is as close as is technically possible to the real thing. However, it is noiseless and safe to explore the machine, so discussions in a group are possible.

Our VR experts will share their knowledge and experience in a classroom setting.

voith.com

General information

Level 2 Intermediate

Virtual Reality

4 h

For an up-to-date overview on course dates for classroom / hands-on trainings available in all regions, please visit our website www.voith.com/paperschool

Voith GroupSt. Poeltener Str. 4389522 HeidenheimGermany

www.voith.com/PaperSchool

Contact:Phone +49 7321 [email protected]

Advantages and targets

+ Receive a virtual tour of a machine, experience the conditions with a walk-through

+ Easily accessible and repeatable content + Train new people in a safe and quiet environment for easy discussion

+ No risk of danger to material or persons due to training + Effective use of time and safe training in a computer-generated environment

Course contentBasics• Real-time representation and simultaneous perception

of reality in a virtual setting• Experience of the relevant components and a short

description of their functionality• One participant will experience VR and the group

will view VR training. In addition, the group is able to sample some of our e-learnings

Working with the VR system• Safety induction• Learn to interact with the system in general• Use of glasses and hand controllers• Navigation in VR, including teleport

Life Training with VR technology• Simulated mill experience • Machine dimensions, including height, width and length

of the machine and the basement in the building• Explore important components and their functionality• Review in original scale and in small dimension• A look at areas not typically accessible,

e.g. under the wire run• All in a safe and quiet environment

Experience to gain• Identify potential critical points • Recognition and prevention of possible errors• Optimization of walking routes• Accident prevention

TrainerVoith expert VR trainer

Target groupsNew and experienced persons

Maximum number of participants5 participants

Cost of training€ 350 exkl. VAT per participants, including certificate and catering

OptionsCombine this training with VR Safety Training• Use of permanent installation at Heidenheim, Germany • Use of customer VR system at mill site • Mill visit with Voith‘s mobile VR system

VP

147

7, e

n, v

vk,

2019

-08.

All

dat

a an

d in

form

atio

n w

ithou

t ob

ligat

ion.

Sub

ject

to

chan

ge.

https://twitter.com/Voith_Paper

https://www.linkedin.com/company/voith-paper

https://www.youtube.com/voithgroup

https://www.xing.com/companies/voithgroup

https://www.facebook.com/VoithGlobal

https://www.instagram.com/voithgroup

SafetyVirtual Reality TrainingA lack of safety awareness endangers employees and their col-leagues. Most conventional safety training cannot simulate real dangerous situations. To overcome this in a safe way, we offer a virtual training for increased safety awareness. Under the simulation, participants will face several dangers. There will be simple but fatal risks involved. The participants need to see, identify and report all possible safety risks in their journey

through the maintenance tasks. The final safety task will occur very abruptly, and it will be seen if the necessary action can be taken under high stress.

In virtual reality, it is possible for participants to experience fatal dangers without being subjected to actual risk. The participants can learn from their fatal mistakes.

voith.com

General information


Virtual Reality

4 h






+ Training of behavior in dangerous situation without endangering personnel. Train for a reliable and fast exchange

+ Better knowledge retention of Voith Paper’s best practices through VR

+ Identify dangers, even in high-stress environment

Course contentBasics• Real-time representation and simultaneous perception

of the real dangers in a virtual setting• Get a unique feeling of conditions• One participant will experience VR and the group will

view VR training. In addition, the group is able to sample some of our e-learnings

Working with the VR system• Safety induction• Learn to interact with the system in general• Use of glasses and hand controllers in a maintenance

setup including information display in VR• Navigation in VR, including teleport• Use of tools to interact with the virtual world

Training with VR technology In addition to the topics from exploration:• Learn how to use the different tools • Interact with the information and guidance system• Identify dangers within a simple maintenance task

Experience to gain• Increase awareness of safety risks by experiencing

potential fatal dangers. Establish the procedures to report all safety related topics

• Highly immersive and efficient method of learning leads to high knowledge retention

• Training available 24/7/365 days, when using customer’s own VR system

• Repeat whenever necessary, e.g., right before the real shutdown

TrainerVoith expert trainer



Cost of training€ 350 excl. VAT per participant, including certificate and catering

Options• Additional VR training during the same visit• Use of permanent installation at Heidenheim, Germany• Use of customer VR system at mill site

VP

147

80,

en,

vvk,

202

0-03

. A

ll d

ata

and

info

rmat

ion

with

out

oblig

atio

n. S

ubje

ct t

o ch

ange

.







NipcoFlex Sleeve ExchangeVirtual Reality TrainingExchanging a sleeve of a shoe press is a challenging task. If mistakes are made, material and staff could be endangered and additional shutdown time is needed to fix the issue. To improve knowledge, we offer a virtual training for exchanging a sleeve of a shoe press in a paper machine. The course will explain the main process steps and how they follow each other in a hands-on virtual world.

VR will also help to improve efficiency in understanding and comprehending by observing and experiencing complex pro-cesses on the paper machine. This is as close as is technically possible to the real thing.

Handling of high value items and faster knowledge transfer will lead to faster and safer maintenance for less downtime.

voith.com

General information


Virtual Reality

1 d






+ Receive knowledge of the necessary process steps in a safe environment. Train for a reliable and fast exchange


+ No endangerment of expensive material + No time usage at the machine

Course contentBasics• Real-time representation and simultaneous perception of

the real process steps in a virtual setting• Get a unique feeling of conditions• One participant will experience VR and the group will view

VR training. In addition, the group is able to sample some of our e-learnings

• The sleeve exchange will be divided into separate modules:– Draping– Deinstallation– Installation



Training with VR technology In addition to the topics from exploration:• Learn how to use the different tools for the process steps• Interact with the information and guidance system• Follow the process steps including visual inspection

Experience to gain• Establish correct procedures for all sub module steps

in the sleeve exchange• Highly immersive and efficient method of learning leads

to high knowledge retention• Training available 24/7/365 days, when using customer’s

own VR system• Repeat whenever necessary, e.g., right before real shutdown





OptionsCombine this training with VR Safety Training• Use of permanent installation at Heidenheim, Germany• Use of customer VR system at mill site • Mill visit with Voith‘s mobile VR system

VP

147

´8,

en,

vvk,

201

9-08

. A

ll d

ata

and

info

rmat

ion

with

out

oblig

atio

n. S

ubje

ct t

o ch

ange

.







Screen Basket ExchangeVirtual Reality TrainingExchanging a basket of a screen on the paper machine or in the stock prep is a challenging task that could endanger mate-rial and personnel. The course will explain the main process steps and how they follow each other. It is possible to train every step of a reliable and fast exchange without damage to the basket or screen. The training will also give the correct size impression of the equipment since the VR system will visualize

it accordingly. This is as close as is technically possible to the real thing. When training on the optimized exchange process, it is also possible to teach the safe positions for interaction and tool usage.

VR is highly efficient and helps to understand and comprehend by looking and experiencing complex processes.

voith.com

General information


Virtual Reality

6 h






+ Receive knowledge of the necessary process steps in a safe environment. Train for a reliable and fast exchange


+ Damage of the basket is prevented + Safe positions for interaction are recognized

Course contentBasics• Real-time representation and simultaneous perception of

the real process steps in a virtual setting• Get a unique feeling of conditions• One participant will experience VR and the group will view

VR training. In addition, the group is able to sample some of our e-learnings



Training with VR technology In addition to the topics from exploration:• Learn how to use the different tools for the process steps• Interact with the information and guidance system• Follow the process steps including visual inspection

Experience to gain• Establish correct procedures for all steps in the basket

exchange• Highly immersive and efficient method of learning leads to

high knowledge retention• Training available 24/7/365 days, when using customer’s

VR system • Repeat whenever necessary, e.g. right before real shutdown





Options• Use of permanent installation at Heidenheim,

Germany• Use of customer VR system at mill site • Mill visit with Voith‘s mobile VR system

Additional VR trainings

VP

147

´9,

en,

vvk,

201

9-08

. A

ll d

ata

and

info

rmat

ion

with

out

oblig

atio

n. S

ubje

ct t

o ch

ange

.







Introduction to papermaking

The Voith Introduction to Papermaking provides a basic understanding of papermaking as the foundation to learn advanced topics faster. Topics range from the history to modern concepts and components for basic paper technology and paper production. A look at the market, selected grades and their requirements and properties will be shared. This will lead to machine concepts with examples of Voith Paper equipment,

raw material, the paper machine and its main sections in cluding coating systems, calendaring, winder and packaging. Our experts will share their knowledge and experience in a classroom setting.

Furthermore, a virtual reality experience of the machine and a workshop tour are included.

voith.com

General information


Class- room

2 d

For an uptodate overview on course dates for classroom / handson trainings available in all regions, please visit our website www.voith.com/paperschool



Contact:Phone +49 7321 37[email protected]


+ Participants will be able to describe and understand the different grades, system components and equipment of a paper machine

+ This training will lead to a better and deeper understanding of paper production and its technologies

+ Gain insight into the industry in general and into the market

Course contentIntroduction• Safety topics & Introduction into Voith Paper

Papermaking technology• Paper definitions and history• Market• Paper characteristics & grades• Raw materials• Production line, general concepts• Stock preparation• Approach flow• Paper machine basics• PM sections: headbox, former, press, dryer, reel• Coating• Calandering• Winding• Automation Introduction• Auxiliaries Introduction

Training with virtual reality technology• Experience a machine in a virtual setup to gain a real

feeling of the size and height of the production line• Get a unique feeling of conditions

Visit to the workshop


Target groupsNew persons to the industry with technical interest


Cost of training€ 1 000 excl. VAT per participant, including certificate and catering

Options• More advanced course in wet end or dry end papermaking• Mill visit with mobile Voith virtual reality system

VP

147

2, e

n, v

vk,

2020

03.

All

dat

a an

d in

form

atio

n w

ithou

t ob

ligat

ion.

Sub

ject

to

chan

ge.







Analytical Problem-Solving TrainingBased on an actual case, we will introduce several methods for troubleshooting and optimization.

We will start the seminar with an introduction of the training case. Next, we will take a look at analytical methods that par-ticipants will subsequently use to generate steps forward on the case. Their results will then be reflected with the actual steps

taken from the case. As more and more information gets identified, additional tools will be introduced and worked on as well. All topics will be discussed in the group to intensify the experience.

voith.com

General information

Level 3 Advanced

Class- room

2 d






+ Experience gained + Ability to relate and describe the analytical methods

+ Knowledge transfer for optimization and troubleshooting of a paper machine

Course contentProblem solving as a mental processTools: brainstorming

Assessing the situation• Split and clarify• Set-up priorities• Further steps• Schedule resourcesTools: Pareto, data collection setup

Problem Analysis• Describe the problem• Possible causes assessment• Confirm causesTools: “Is - /Is not” test, Fishbone diagram, “Why it is / Why it is not” test, Occam’s razor

Executing the solving measures

Maintaining the results

TrainerVoith expert with many years of experience in all aspects of papermaking

Target groupsPapermakers, technology experts and process engineers who are already performing papermaking optimization tasks on a PM or are planning to do so in the future


Cost of training€ 1 500 excl. VAT per participant, including training materials, certificate and catering

VP

147

3, e

n, v

vk,

2020

-03.

All

dat

a an

d in

form

atio

n w

ithou

t ob

ligat

ion.

Sub

ject

to

chan

ge.







Maintenance Strategy TrainingWe offer a training for maintenance strategies in the paper industry. From our experience gained in internal and external investigations, the course aims to deep-dive into the most suc-cessfully used strategies and discuss the pros and cons. Starting from the main characteristics and targets of mainte-nance organizations, the course will guide participants in detail

through the evolution of maintenance strategies. The course will explain which strategies provide advantages depending on the equipment and the overall mill situation. Real examples and experiences from the paper industry will illustrate and underline the theory.

voith.com

General information


Class- room

2 d






+ Direct examples and best practices from theglobal paper industry and other industries

+ Voith expertise as equipment manufacturerand service provider

+ Undisturbed exchange of Voith experiences

Course contentTheoretical aspect • Evolution of maintenance• Maintenance strategies overview• Maintenance strategies in detail (abstract)

– reactive maintenance / run-to-failure– preventive maintenance / condition monitoring– Reliability Centered Maintenance methodology (RCM)– predictive & prescriptive maintenance– Practical examples

Practical aspect • Working on examples• Group work

Goals• Understanding of maintenanace strategies employed

across the paper industry and beyond• Find measures to choose the optimal strategy for each

equipment

TrainerVoith maintenance consultant

Target groupsManagers or group leaders from maintenance or process side, or persons who will perform these functions in the future


Cost of training€ 1 000 exkl. VAT per participant, including training materials,

certificate and catering

VP

147

5, e

n, v

vk,

2020

-03.

All

dat

a an

d in

form

atio

n w

ithou

t ob

ligat

ion.

Sub

ject

to

chan

ge.







Papermaking Wet EndRound tableThis is a specially designed expert (highest available level) train-ing with the focus on paper production, technology, runnability and breaks in the wet end section (approach flow, headbox, former, press).

We will start with a safety induction on the paper machine. Then we will focus on layouts, machines and concepts in the de-scribed sections. This will be the basis for the most common optimization tasks. We will discuss web break analysis and runability topics. All topics will be taught using case studies from actual production machines. Also, participant questions and discussion will take place.

voith.com

General information

Level 3 Advanced

Class- room

2 d






+ Deep understanding of the wet end of a paper machine

+ Experience gained and knowledge transfer in this training will provide a better understanding of the wet end

Course contentWet end sections: Headbox, wire section, press section• Safety with focus on paper industry• Concepts & components • Machines, services, examples • Case studies• Web break analysis• Best practices • Troubleshooting • Commissioning• Reporting, documentation, travel arrangements


Target groupsPapermakers, technology experts and process engineers


Cost of training€ 1 500 exkl. VAT per participant, including training material, certificate and catering

VP

147

4, e

n, v

vk,

2020

-03.

All

dat

a an

d in

form

atio

n w

ithou

t ob

ligat

ion.

Sub

ject

to

chan

ge.







General information

Papermaking Dry End & Coating Round TableThis is a specially designed expert (highest available level) train-ing with the focus on paper production, technology, runnability and breaks in the dry end section (dryer section, film & blade coaters, DF coaters). We will focus on layouts, machines and concepts in the described sections. This will be the basis for an open discussion about best practices, commissioning tips and known issues.

All topics will be taught using case studies from actual produc-tion machines. Also, participant questions and discussion will take place.

voith.com

Level 3 Advanced

Class- room

2 d






+ Ability to relate and describe the dry end of a paper machine

+ Knowledge transferred in this training + Better understanding of the dry end section

Course contentDryer section• Layouts & concepts (mono tier, double tier)• Components and parts inside, as well as their functions

Troubleshooting (case studies)• Dryer fabric contamination • Cylinder temperature curve • Dryer can surface temperature in CD• CD porosity profile• Air velocity, pocket conditions• Thermography• CD moisture profile

Coating• Layouts & concepts • Components and parts inside, as well as their functions

– Film applicator– Blade coater– Curtain coater

Online concepts • Layout of numerous online concepts for coating

(film, blade, curtain)

Offline concepts • Layout of several OMCs• Troubleshooting events (case studies)• Technology: flying splice

Commissioning• Common commissioning skills and steps

– Preparation work (in the office, before arrival)– Preparation work (in customer’s facility)


Target groupsPapermakers, technology experts and process engineers


Cost of training€ 1 500 excl. VAT per participant, including training materials, certificate and catering

VP

147

6, e

n, v

vk,

2020

-03.

All

dat

a an

d in

form

atio

n w

ithou

t ob

ligat

ion.

Sub

ject

to

chan

ge.







PneumaticBasic TrainingIf you are no expert in pneumatic, you will have difficulties in understanding the pneumatic plans of the paper industry. This makes it difficult to discuss topics with the experts. To overcome this Voith offers a training for a basic pneumatic understanding.

This includes compressors, dryers, pneumatic components, vacuum technics, costs of pneumatics, safety and mainte-nance. The practical work at the training will deepen the learning experience.

voith.com


General information

Level 1 Basic

Hands-on 2 d





+ Experience gained + Ability to read and understand the pneumatic components and plans on a basic level

+ Hands-on training with pneumatic training units + Knowledge transfer to better perform the service work in this area

Course contentTheoretical aspects • Basics of physics for pneumatic

(sizes, dimensions, units, laws)– Basics of pneumatics – Compressors– Dryers– Pneumatic components– Vacuum technics– Costs of pneumatics– Safety– Maintenance

• Reading of circuit diagram (PID) on selected pneumatic systems including examples from Voith Paper

Practical aspects • Practical work on training systems/units at the

Voith Training Center

TrainerVoith expert with many years of experience

Target groupsService personnel or future service personnel, interest in pneumatics


Cost of training€ 1 000 plus VAT per participant, including documents, beverages and lunch

VP

147

81,

en,

vvk,

202

0-03

. A

ll d

ata

and

info

rmat

ion

with

out

oblig

atio

n. S

ubje

ct t

o ch

ange

.







Hydraulic Basic TrainingIf you are no expert in hydraulic, you will have difficulties in understanding the hydraulic plans of the paper industry. This makes it difficult to discuss topics with the experts. The Voith Hydraulic Basic Training will cover the use of fluid for signal, force and energy transfer as well as lubricant supply. In the theoretical part, we will give an overview of the basic physics of the systems and the principles to read the Voith Paper plans and schematics in this area.

This includes pumps, directional valves, pressure valves, flow control valves, cylinders, filtration, accumulators and other selected components. The practical work in this training unit will deepen the learning experience.

voith.com


General information

Level 1 Basic

Hands-on 3 d





+ Experience gained + Ability to read and understand the hydraulic components and plans on a basic level

+ Hands-on training with hydraulic training units + Knowledge transfer to better perform the service work in this area

Course contentTheoretical aspects • Basics of physics for hydraulic

(sizes, dimensions, units, laws)– Principles of circuit diagram (PID)– Choices of pumps and their properties

• Important hydraulic components, their faults and damages, as well as possible causes– Directional valves– c/o valves– Pressure valves– Flow control valves

• Cylinder types, damages and possible causes– Deaeration– Filtration, results and flushing– Oil types and care– Pressure accumulators– Tanks and their tasks, dimensions– Safety

• Reading of circuit diagram (PID) on selected hydraulic systems including examples from Voith Paper

Practical aspects • Practical work on training systems/units at the

Voith Training Center

TrainerVoith expert with many years of experience

Target groupsService personnel or future service personnel, interest in hydraulics


Cost of training€ 1 250 plus VAT per participant, including documents, beverages and lunch

VP

147

81,

en,

vvk,

202

0-03

. A

ll d

ata

and

info

rmat

ion

with

out

oblig

atio

n. S

ubje

ct t

o ch

ange

.







Voith GroupSt. Poeltener Str. 4389522 Heidenheim, Germany

Contact:Phone +49 7321 [email protected]/PaperSchool

VP

148

3, e

n, v

vk,

2020

-03.

All

dat

a an

d in

form

atio

n w

ithou

t ob

ligat

ion.

Sub

ject

to

chan

ge.







Documents

Training catalogue PaperSchool...Maximum number of participants 5 participants Cost of training € 600 excl. VAT per participant, including certificate and catering Options • Use