8/9/2019 Train to Gain Brochure

1/24

8/9/2019 Train to Gain Brochure

2/24

06/05/08This information was correct at the time of publication

8/9/2019 Train to Gain Brochure

3/24

CCONTENTSONTENTS

1

Introduction 2

Delivery process 3

RIGGINGSupporting Engineering Activities NVQ - Level 2 4

Moving loads NVQ - Level 3 5

STEEL ERECTING

Constructional Steelwork site operations NVQ - Level 2 6

Constructing Capital Plant Steel Structures: NVQ - Level 3 7

MECHANICAL

Maintaining Plant and Systems - Mechanical NVQ Level 3 8-9

PIPEWORK

Installing Plant and Systems - Pipefitting NVQ - Level 3 10

PLATING

Fabricating of Steel Structures NVQ - Level 3 11

WELDING

Welding (Plate) NVQ Level 3 12-13

SCAFFOLDING

Accessing Operations & Rigging NVQ - Level 2 14

Accessing Operations & Rigging NVQ - Level 3 15

ELECTRICAL

Installing & commissioning electro-technical systems & equipment

(plant) NVQ Level 316

Maintaining plant systems (Electrical) NVQ Level 3 17-18

INSTRUMENTATION

Maintaining Plant and Systems:Instrument and Controls

NVQ Level 319-20

8/9/2019 Train to Gain Brochure

4/24

8/9/2019 Train to Gain Brochure

5/24

CANDIDATE REGISTRATION

ONLINE/ FACE TO FACE TRAINING

AS APPROPRIATE

PORTFOLIO BUILD/ E FOLIO BUILD

EVIDENCE GATHERING

OBSERVATION

WITNESS STATEMENT

INTERNAL VERIFICATION

EXTERNAL VERIFICATION

ISSUE OF CERTIFICATE

NETA

SUPPORT

DDELIVERYELIVERY PPROCESSROCESS

3

8/9/2019 Train to Gain Brochure

6/24

8/9/2019 Train to Gain Brochure

7/24

8/9/2019 Train to Gain Brochure

8/24

6

CONSTRUCTIONAL STEELWORK SITE OPERATIONS

NVQ - LEVEL 2

Candidates must achieve TEN units made up of:

all SEVEN of the Mandatory unitsplus

ONE further units from the Technical Options

MANDATORY UNITS - Candidate must achieve all SEVEN units

Unit SO1: Contribute to effective working relationships

Unit SO2: Work safely, minimise risk and comply with emergency procedures

Unit SO3: Identify and deal with hazards in the work environment

Unit SO4: Carry out slinging and signalling for the movement of loads

Unit SO5: Erect structural steelwork components

Unit SO8: Work safely at height on steel structures

Unit SO12:Assemble bolted joints in structural steelwork

TECHNICAL OPTIONS - Candidates must achieve any ONE unit.

Unit SO9: Set up and utilise powered access equipment

Unit SO10: Operate powered tools and equipment for routine and predictable

requirements

Unit SO11: Operate specialised plant and machinery to peformance

requirements

Unit SO13: Work to the dimensional control of the work programme

Unit SO14: Dismantle structural steelwork components

Unit SO15: Store structural steelwork related resources for further use

SSTEELTEEL EERECTINGRECTING

8/9/2019 Train to Gain Brochure

9/24

7

Candidates must achieve FOURTEEN units made up of:

all TEN of the mandatory units;plus

FOUR further units from the technical options.

CONSTRUCTING CAPITAL PLANT STEEL STRUCTURES:

NVQ - LEVEL 3

MANDATORY UNITS - candidates must achieve all TEN units.

Unit E1: Prepare structural steel loads for moving

Unit E2: Move structural steel loads

Unit E3: Position and erect steel structures

Unit E4: Erect structural steel sections

Unit E5: Dismantle structural steel sections

Unit E6: Reinstate the work area after completing structural steel activities

Unit E7: Store structural steel related resources for further useUnit CO1: Contribute to effective working relationships

Unit CO2: Work safely, minimise risk and comply with emergency

procedures

Unit CO3: Identify and deal with hazards in the work environment

TECHNICAL OPTIONS - candidates must achieve any FOUR units.

Unit E8: Check that the steel structure is installed to specification

Unit E9: Determine technical requirements to achieve steel erecting

objectives

Unit E10: Determine resource requirements to achieve steel erecting

objectives

Unit E11: Prepare work areas for steel erecting activitiesUnit E12: Prepare materials required for steel erecting activities

Unit E13: Prepare equipment required for steel erecting activities

SSTEELTEEL EERECTINGRECTING

8/9/2019 Train to Gain Brochure

10/24

8/9/2019 Train to Gain Brochure

11/24

TECHNICAL OPTIONS - Candidates must achieve any FOUR units of

which THREE must be selected from SET A and ONE from SET B.

SET A: (Select THREE units)

Unit MPS Mech 10:Assemble bolted joints to a specification

Unit MPS Mech 11:Assemble components of mechanical plant and

equipment

Unit MPS Mech 12: Restore components from mechanical plant and

equipment to operational condition by repair

Unit MPS Mech 13: Prepare work areas for the maintenance of mechanical

plant and equipment

Unit MPS Mech 14: Prepare materials for the maintenance of mechanical

plant and equipment

Unit MPS Mech 15: Prepare equipment in support of engineering activities

Unit MPS Mech 16: Reinstate the work area after completing the

maintenance of mechanical plant and equipment

Unit MPS Mech 17: Hand over mechanical plant and equipment

SET B: (Select ONE unit)

Unit MPS Mech 18: Determine the feasibility of repair of components of

mechanical plant and equipment

Unit MPS Mech 19: Test the performance and condition of mechanical

plant and equipment

Unit MPS Mech 20:Analyse test results relating to mechanical plant and

equipment

Unit MPS Mech 21: Establish that a engineering maintenance process has

been completed to specification

MAINTAINING PLANT AND SYSTEMS - MECHANICAL

NVQ LEVEL 3

9

MMECHANICALECHANICAL

8/9/2019 Train to Gain Brochure

12/24

INSTALLING PLANT AND SYSTEMS - PIPEFITTING

NVQ - LEVEL 3

Candidates must achieve TEN units made up of:

all FIVE of the Mandatory unitsplus

EITHER Unit IPS Pipe 3 OR Unit IPS Pipe 12plus

FOUR further units from the Technical Options

MANDATORY UNITS - Candidate must achieve all FIVE units

Unit IPS Pipe 1: Shape pipework components by material removal using

hand tools

Unit IPS Pipe 2:Assemble pipework components to meet specification

Unit CO1: Contribute to effective working relationships

Unit CO2: Work safely and comply with emergency procedures

Unit CO3: Deal with hazards in the work environment

TECHNICAL OPTIONS - Candidates must achieve EITHER Unit IPS Pipe 3

OR Unit IPS Pipe 12 PLUS any FOUR other units.

Unit IPS Pipe 3: Position and install pipework

Unit IPS Pipe 4: Mark out to required specification

Unit IPS Pipe 5: Establish the compliance of an engineering installation with

the specification

Unit IPS Pipe 6: Prepare work areas for the installation of pipework

Unit IPS Pipe 7: Prepare materials required for pipework installation

Unit IPS Pipe 8: Prepare equipment for pipework installation

Unit IPS Pipe 9: Reinstate the work area after completing the installation of

pipework

Unit IPS Pipe 10: Store pipework installation related resources for further use

Unit IPS Pipe 11: Test the performance and condition of installed pipework

Unit IPS Pipe 12: Shape pipework components by manually applied pressure10

PP IPEWORKIPEWORK

8/9/2019 Train to Gain Brochure

13/24

FABRICATING OF STEEL STRUCTURES

NVQ - LEVEL 3

Candidates must achieve TEN units made up of:

all EIGHT of the Mandatory unitsplus

TWO further units from the Technical Options

MANDATORY UNITS - Candidate must achieve all EIGHT units

Unit FSS1: Shape components of fabricated steel structures by removal

using hand and Power tools

Unit FSS2: Prepare work areas for the fabrication of steel structures

Unit FSS3: Prepare materials for the fabrication of steel structures

Unit FSS4: Prepare equipment for the fabrication of steel structures

Unit FSS5: Reinstate the work area after completing the fabrication of

steel structures

Unit CO1: Contribute to effective working relationships

Unit CO2: Work safely and comply with emergency procedure

Unit CO3: Deal with hazards in the work environment

TECHNICAL OPTIONS - Candidates must achieve any TWO units.

Unit FSS6:Assemble components of steel fabrications to meet

specification

Unit FSS7: Store steel structure fabrication related resources for further

use

Unit FSS8: Manually form components to specification

Unit QSE9: Join materials by the arc welding processes

11

PPLATINGLATING

W

8/9/2019 Train to Gain Brochure

14/24

WELDING (PLATE)

NVQ LEVEL 3

Candidates must achieve TWELVE units made up of:

all NINE of the Mandatory unitsplus

THREE units from the Technical Options comprisingGroup A OR 2 units from Group A and One unit from

Group B

MANDATORY UNITS - Candidates must achieve all NINE units

Unit W1: Prepare work areas for welding activities

Unit W2: Prepare materials required for welding activities

Unit W3: Prepare equipment for welding activities

Unit W4: Reinstate the work area after completing welding activities

Unit W5: Store and control resources during welding

Unit W6: Obtain and interpret welding specifications

Unit CO1: Contribute to effective working relationships

Unit CO2: Work safely, minimize risk and comply with emergency

procedures

Unit CO3: Identify and deal with hazards in the work environment

OPTIONAL UNITS -

Candidates must achieve THREE units from

Group A (W26 to W43)

OR

2 units from Group A (W26 to W43) PLUS

ONE unit from Group B (W9 to W25)

12

WWELDINGELDING

8/9/2019 Train to Gain Brochure

15/24

SS

8/9/2019 Train to Gain Brochure

16/24

SSCAFFOLDINGCAFFOLDING

ACCESSING OPERATIONS & RIGGING

NVQ - LEVEL 2

Candidates must achieve all EIGHT mandatory units;

MANDATORY UNITS

Unit VR01 - Conform to General Workplace Safety

Unit VR02 - Conform to Efficient Work Practices

Unit VR03 - Move & Handle Resources

Unit VR247 - Tube & FittingErect & Dismantle Independent & Birdcage

Scaffold Systems Scaffolding

Unit VR248 - Tube & FittingErect & Dismantle Tower Scaffold Systems

Scaffolding

Unit VR249 - Tube & FittingErect & Dismantle Cantilever Scaffold SystemsScaffolding

Unit VR251 - Tube & FittingErect & Dismantle Pavement & Roof Scaffold

Systems Scaffolding

unit VR252 - Utilise Provision for Fall Arrest

14

SSCAFFOLDINGCAFFOLDING

8/9/2019 Train to Gain Brochure

17/24

ACCESSING OPERATIONS & RIGGING

NVQ - LEVEL 3

Candidates must achieve all EIGHT mandatory units;

MANDATORY UNITS

VR01 - Conform to General Workplace Safety

VR209 - Confirm Work Activities and Resources for the Work

VR210 - Develop and Maintain Good Working Relationship

VR211 - Confirm the Occupational Method of Work

VR252 - Utilise Provision for Fall Arrest

VR405 - Scaffolding (Construction) Erect Specialised, Designed Scaffolds

and Rigging

VR406 - Tube & FittingErect and Dismantle Complex Overhead ScaffoldsSystems Scaffolding

VR407 - Tube & FittingErect and Dismantle Complex Falsework Scaffolds

Systems Scaffolding

VR408 - Tube & FittingErect and Dismantle Complex Shoring Scaffolds

Systems Scaffolding

VR409 - Tube & FittingErect and Dismantle Complex Access and Support

Scaffolding Temporary Roof

Systems Scaffolding Structures

15

SSCAFFOLDINGCAFFOLDING

8/9/2019 Train to Gain Brochure

18/24

8/9/2019 Train to Gain Brochure

19/24

EELECTRICALLECTRICAL

8/9/2019 Train to Gain Brochure

20/24

18

TECHNICAL OPTIONS - Candidates must achieve any FOUR units of

which THREE must be selected from SET A and ONE from SET B

SET A

Unit MPS Elec 10:Assemble components of electrical plant and

equipmentUnit MPS Elec 11: Restore components from electrical plant and

equipment to operational condition by repair

Unit MPS Elec 12: Prepare work areas for the maintenance of electrical

plant and equipment

Unit MPS Elec 13: Prepare materials for the maintenance of electrical

plant and equipment

Unit MPS Elec 14: Prepare equipment in support of electrical

engineering activities

Unit MPS Elec 15: Reinstate the work area after completing the

maintenance of electrical plant and equipment

Unit MPS Elec 16: Hand over electrical plant and equipment

SET B

Unit MPS Elec 17: Determine the feasibility of repair of components of

electrical plant and equipment

Unit MPS Elec 18: Test and monitor the performance and condition of

electrical plant and equipment

Unit MPS Elec 19:Analyse the test results relating to the tested

electrical plant and equipment

Unit MPS Elec 20: Establish that an electrical engineering maintenance

process has been completed to specification

EELECTRICALLECTRICAL

MAINTAINING PLANT AND SYSTEMS:

INSTRUMENT AND CONTROLS

NVQ - LEVEL 3 - CONT.

8/9/2019 Train to Gain Brochure

21/24

IINSTRUMENTATIONNSTRUMENTATION

8/9/2019 Train to Gain Brochure

22/24

20

TECHNICAL OPTIONS - candidates must achieve any FOUR units of whichTHREE must be selected from SET A and ONE from SET B.

SET A:

Unit MPS Inst 9: Assemble components of instrument and control systems

Unit MPS Inst 10: Restore components from instrument and control systems

to operational condition by repair

Unit MPS Inst 11: Prepare work areas for maintaining instrument and control

systems

Unit MPS Inst 12: Prepare materials required for maintaining instrument and

control systems

Unit MPS Inst 13: Prepare equipment required for maintaining instrument and

control systems

Unit MPS Inst 14: Reinstate the work area after completing the maintenance

of instrument and control systems

Unit MPS Inst 15: Handover plant and equipment

SET B:Unit MPS Inst 16: Determine the feasibility of repair of components from

instrument and control systems

Unit MPS Inst 17: Test the performance and condition of instrument and

control systems

Unit MPS Inst 18: Analyse the test results relating to the tested instrument and

control systems

Unit MPS Inst 19: Establish that an engineering maintenance process has

been completed to specification

IINSTRUMENTATIONNSTRUMENTATION

MAINTAINING PLANT AND SYSTEMS:

INSTRUMENT AND CONTROLS

8/9/2019 Train to Gain Brochure

23/24

Thi C i f id d b

8/9/2019 Train to Gain Brochure

24/24

This Course is one of many provided by

NETA Training Group.

Other Courses include:

Electrical / InstrumentationHazardous Area Training (COMP'EX')

AM2

Health & Safety

Safety Passport

Abrasive Wheels

CPC (Certificate of Professional Competence)Lifting / Slinging / Rigging

Lorry Loader

Management/Supervisory

Assessor Training A1/ A2/ V1

Mechanical/Fabrication

Pneumatics and HydraulicsCommercial & Domestic Gas Training

Scaffolding

Transport

ADR Hazchem

Fork Lift Truck

Welding/Welder Testing

For information on forthcomingCourses Examination Dates / Times

or a full range of courses contact:

NETA Training Group

Sales Department

Pennine Avenue

North Tees Industrial Estate

StocktonTS18 2RJ

Tel: 01642 616936Fax: 01642 612431

email enquiries@neta.co.uk website www.neta.co.uk

Equal Opportunities Statement

It is our aim that there shall be equal opportunities in this organisation. There will be no discrimination on grounds of sex, be ing

married, colour, race or disability which is not permitted by law; or on any grounds, including age, except where this is necessary

to ensure that the job is done effectively. This principle will apply to recru itment, training, promotion, dismissa l, transfer and all other

benefits, terms and conditions of employment.

Meeting the needs and expectations of service users is of the highest priority to our

staff. Therefore if you have any concerns or wish to make a comment about the service

please contact: Barbara Seddon email b.seddon@neta.co.uk