-
7/28/2019 TR14(A4)
1/4
MEMBRANE TEST UNIT
SOLTEQ
MODEL: TR 14
THIS Membrane Test Unit (Model: TR 14) has been designed to
demonstrate the technique of membrane
separations which has become highly popular as they provide
effective separation without the use of
heating energy as in distillation processes. Heat sensitive
materials, such as fruit juices, can be separatedor concentrated by
virtue of their molecular weights. The unit consists of a test
module supplied with four different
membranes, namely the reverse osmosis (RO), nanofiltration (NF),
ultrafiltration (UF) and microfiltration (MF)
membranes, thus allowing students or researchers to carry out
membrane separation processes that are most
widely used in the food, dairy, pharmaceutical and chemical
industries.
This self-contained unit on a mobile epoxy coated steel
framework, requires only connection to a suitable
electricity supply and a normal cold water supply to
be fully operational. It consists of a feed tank, a product
tank, a feed pump, a pressure regulator, a water bath,
and a membrane test module. All parts in contact with
the process fluid are stainless steel, PTFE, siliconerubber or
nitrile rubber.
The unit comes with a high pressure feed pump for
delivering the feed to the membrane unit at the desired
flow rate and pressure. The retentate line can be either
returned to the feed tank or straight to the drain.
Appropriate sensors for flow, pressure and temperature
are installed at strategic locations for process monitoring
and data acquisitions.
Equipment for Engineering Education & Research
-
7/28/2019 TR14(A4)
2/4
SO
LTE
QEXPERIMENTAL CAPABILITIES
The unit is suitable for carrying out a wide range ofexperiments
such as:
Dewatering
Concentration
Demineralisation
Sugar removal
Clarification
It is also possible to study the effect of varying the
following process parameters on separation
performance: Flow rate
Pressure
Temperature
SPECIFICATIONS
a) Membrane Test Module
Consists of 6 perforated stainless steel tubes of
12.7mm internal diameter assembled into end
headers on a tray which is divided into 6 channelssuch that the
permeate from each of the six tubes
is collected separately. Four tubes are fitted with
the following membrane: Polyamide (RO)
Polyamide (NF)
Polyethersulphone (UF)
PVDF (MF)
Operating Press. : 10 to 64 bar
Operating Temp. : 60 to 80 oC
Max. pH Range : 1.5 - 12
Module Length : 1.20 mMembrane Area : 0.05 m2
b) Feed and Permeate Tanks
Capacity : 30 litres
Material : stainless steel
c) Feed Pump
Type : triple head piston type
Capacity : 13 LPM
Working Press. : 7 to 85 barPump speed : 1,725 RPM
Fluid Temp. : max. 71 oC
d) Circulating Bath
Temp. range : -20 to 100 oC
Accuracy : 0.2 oCBath capacity : 6-L
e) Control Panel
It consists of mainly the switches for the pump
operation and temperature indicator.
f) Instrumentations
All necessary devices for the measurements of
flow, pressure, temperature and flux.
OPTIONAL ITEMS
- EI
DIGITAL INSTRUMENTATIONS
i) 3 Units of Digital Indicators
ii) 2 units of electronic flowmeter
iii) 4 units of pt100 RTD sensors c/w transmitters
iv) 4 units of Differential pressure transmitters
v) 4 units of Digital Balances
- DAS
SOLDAS DATA ACQUISITION SYSTEM
i) A PC with Pentium processor
ii) A signal conditioning unit
iii) A stand alone data acquisition modules
iv) A Windows based software
Data Logging
Signal Analysis Process Control
Real-Time Display
Tabulated Results
Graph of Experimental Results
- CAL
SOLCAL COMPUTER AIDED LEARNING
SOFTWARE
i) Interactive multimedia featuresii) Graphical simulation
iii) Experiment results samples
iv) Full experiment manuals
SOLTEQ Equipment for Engineering Education & Research
-
7/28/2019 TR14(A4)
3/4
SO
LTE
QREQUIREMENTS
Electrical Supply : 415VAC/3-ph/50Hz/30AWater Supply :
Laboratory mains supply
OVERALL DIMENSIONS
Height : 2.00 m
Length : 1.22 m
Depth : 2.44 m
MANUALS
The unit is supplied with Operating and Experimentmanuals in
English.
SOLTEQ Equipment for Engineering Education & Research
-
7/28/2019 TR14(A4)
4/4
SOLTEQ
Our range of teaching equipment can be complemented with our
SOLDAS and SOLCAL software.
SOFTWARE & E - LEARNING
SOLDAS - Supervisory Control & Data Acquisition
- Data Logging
- Signal Analysis
- Process Control
- Real-Time Display
- Tabulated Results- Graph of Experimental Results
SOLCAL - Computer Aided Learning
- Multimedia Features
- Interactive- Graphic Simulation
- Experiment Result Samples
- Full Experiment Manuals
Contact us for a catalog CD
SOLUTION ENGINEERING SDN. BHD.(Co. No. 174876-M)
Sales Office :
No.3, Jalan TPK 2/4, Taman Perindustrian Kinrara,47100 Puchong,
Selangor Darul Ehsan, Malaysia.Tel. No. : +(603) 80758000Fax. No. :
+(603) 80755784
R&D Office :
G-2A, Incubator 3, Technology Park Malaysia,
Bukit Jalil, 57000 Kuala Lumpur, Malaysia.Tel. No. : +(603) 8996
0023
Email : [email protected] site :
http//www.solution.com.my/
AGENT:
Equipment for Engineering Education & Research
BUATAN MALAYSIA
MSC- StatusCompany
