tpi 6088 Corp Catlog rev-7 - Tiger Profiles · Our systems and solutions product line includes roof and wall profiles, floor deck panels, sandwich panels, concealed fix wall panels,

TigerPROFILES & INSULATION LLC

Corporate Catalogue

The Roof & Cladding Company

Table of Contents

The product information and technical details contained in this brochure were, at the time of publishing, April 2015, accurate, and true to the best of our knowledge.We reserve the right to make any appropriate changes, in view of our continuous quest for improvement and advancement.

All projects and pictures appearing in this literature are from projects/jobs that TigerPROFILES was involved in through design, supply and/or installation.Copyright 2015.

Corporate Catalogue

For technical specifications, load tables and additional information please visit our online library atwww.TigerPROFILES.com .

Alternatively, our Client Service staff is always readily available to serve your needs and offer any requiredsupport or liaison with our other depts.

Page

The Company: TigerPROFILES & INSULATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Corporate Social Responsibility (CSR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Accreditation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Product Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Product Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Roof, Wall and Floor Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Roof and Wall Profiles: TR 35/200, TR 47/180, TR 45/150, TR 45/250,

TR 75/300, Sinusoidal Profile 18/76 . . . . . . . . . . . . 9Roof Profiles: TR 102/275, Roof Tiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Floor Deck Profiles: TS 47/180, TS 60/300, TS 75/300 . . . . . . . . . . . . . . . . 11

Insulated Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Insulated Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Cold Store Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Concealed Fix Wall Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Tongue and Groove (Partition) Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17TR 45/150 and TR 45/250 Trapezoidal Panels . . . . . . . . . . . . . . . . . . . . . . 18

Pre-Insulated Ventilation Ducts Boards and Accessories . . . . . . . . . . . . . . . . . . . . . 20Pre-Insulated Ventilation Ducts Boards and Accessories . . . . . . . . . . . . . . . . . . . . 21

Cold Formed Profiles and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Z-Purlins & C-Channels, Sag Rods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Flashing and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Metal Stud Partition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

T-Seam® (Standing Seam Systems) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26T-Seam® (Standing Seam Systems) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

K-Span Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28K-Span Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Tiger Engineered Building Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30(TEBs) – Tiger-Engineered Building Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Project Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32Some Project References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Project References - Commercial Sector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Project References - Aviation Sector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Project References - Recreation Sector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45Project References - Education Sector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48Project References - Culture Sector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52Project References - Industrial Sector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

TigerSTEEL ENGINEERING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

TigerPROFILES BUILDING MATERIALS TRADING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

The Company: TigerPROFILES & INSULATION

TigerPROFILES & INSULATION (TPI) is your solution provider for roofing and cladding and insulation systems.

Also known as the Roof & Cladding Company, TigerPROFILES was established in the UAE in 1993 as the “Cladding Arm”of the TigerGROUP of companies. Today, two decades later, we extend to you Design, Engineering, Manufacturing,Supply and Installation services thus enabling you to source prime, customized solutions to all your roofing and claddingrequirements from one ideal source – us!

Our systems and solutions product line includes roof and wall profiles, floor deck panels, sandwich panels, concealed fixwall panels, cold store panels, standing seam systems (known as T-Seam®), and cold formed sections both standard andclient specific as well as all the required accessories.

With an annual production capacity of Z and C Purlins exceeding 2,600,000 meters, we are classified as one of thelargest producers in the region, as well as being recognized as a regional and major manufacturer of PUR/PIR/Mineralwool insulated panels; our annual production capacity of continuous insulated panels exceeds 4,000,000m2.

The added value we cater to you with, is our infinite dedication to provide customized solutions that fit in with yourneeds, your requirements, your time and your budget. Consequently, this motivates us to provide you withcomprehensive consultation service, free of charge, that entitles you to consultations and recommendations from ourteam of seasoned experts, who can help guide you towards the ideal solutions that will work best to fit your needs withmaximum efficiency.

Our role as a proactive solution provider over the past two decades has exposed to infinite challenging scenarios thathave greatly contributed to the success we enjoy today as a partner of choice. Whether you require support andadvice for a complex design, an inaccessible site, or when your dilemma is the color or material to select foryour roof, whatever your requirement, we are here to support and guide you, all the time, any time, andalways free of charge.

Standing tall, we have raised ourselves from the crush of the crowd by setting international standards that set us apartfrom other companies in the industry. Adhering to ISO 9001, ISO 14001, OHSAS 18001, FM Approvals (USA), DBITApprovals (Germany) and Dubai Municipality and Dubai Civil Defense is only the tip of the guarantee to standards byour management.

Our TigerPROFILES commitment is to put our client first by providing excellent service and by focusing on you, our clientand by being a responsible member of our communities, and thus producing a solid return for our company, whilecreating meaningful work for ourselves and provide something of lasting value for society.

Our Corporate Social Responsibility is at the core of our operations, and this is reflected in our T.P.I values, and spare noeffort to ensure that they are the solid backbone of our operations:

T=TECHNOLOGY: We are committed to seeking and providing the best-in-class technology that will guarantee thequality performance that we are proud of, and that we continuously aim to provide.

P=PERFORMANCE: We hold ourselves to a very high standard of performance, because we never aim to only pleaseyou by serving you well—our aim is to always astonish you by providing outstanding service and support. We never stopasking ourselves how we can improve ourselves, our company and our products, and every day, we work to find an answer.

I=INTEGRITY: Is at the heart of everything we do. We are honest, ethical and sincere because trust is at thefoundation of our relationships with our clients, and each other. We take responsibility for our actions as individuals, asteam members, and as an organization.

2

Corporate Social Responsibility (CSR)

3

Our commitment to corporate social responsibility is evident in many aspects of our operations.

United Nations Global CompactWe are members of the UN Global Compact, a strategic policy initiative for businesses that are committedto aligning their operations and strategies with ten universally accepted principles in the areas of humanrights, labour, environment and anticorruption.

United States Green Building CouncilWe are members of the United States Green Building Council, a non-profit organization committed to aprosperous and sustainable future through transforming the way buildings and communities are designed,built and operated, enabling an environmentally and socially responsible, healthy, and prosperousenvironment that improves the quality of life.

Emirates Environmental GroupWe are members of the Emirates Environmental Group (EEG), an environmental NGO devoted to protectingthe environment through means of education, action programs and community involvement.

We incorporate Corporate Social Responsibility into our operations in a manner that reflects our commitment to thefollowing 10 Principles of the UNGC:

Principle 1: Businesses should support and respect the protection of internationally proclaimed human rights; andPrinciple 2: make sure that they are not complicit in human rights abuses.

Principle 3: Businesses should uphold the freedom of association and the effective recognition of the right to collective bargaining;Principle 4: the elimination of all forms of forced and compulsory labour;Principle 5: the effective abolition of child labour; Principle 6: the elimination of discrimination in respect of employment and occupation.

Principle 7: Businesses should support a precautionary approach to environmental challenges;Principle 8: undertake initiatives to promote greater environmental responsibility; andPrinciple 9: encourage the development and diffusion of environmentally friendly technologies.

Principle 10: Businesses should work against corruption in all its forms, including extortion and bribery.

Equal Employment Opportunity: In order to provide equal employment and advancement opportunities to all individuals,employment decisions at TigerPROFILES are based on merit, qualifications, and abilities. All employment practices andactivities are conducted on a non-discriminatory basis.

Code of Ethics: We strive to conduct our business honestly and ethically wherever we operate in the world. We willconstantly improve the quality of our services, products and operations and will create a reputation for honesty, fairness,respect, responsibility, integrity, trust and sound business judgment. No illegal or unethical conduct on the part ofofficers, directors, employees or affiliates is tolerated.

We do not compromise our principles for short-term advantage. The ethical performance of our company is the sum ofthe ethics of the men and women who work here. Thus, we are all expected to adhere to high standards of personal integrity.

Save the Tigers Campaign: As Tigers we have taken action - we have joined the WWF - World Wildlife Organisation tosupport their initiatives to save the tigers; and we have adoped a tiger family and pledge to make our roar heard whereverpossible to serve our namesake.

4

AccreditationQuality, Environment, Health and Safety

Accreditation

5

Quality Management Policy:We have established a quality management system in-line with the ISO 9001:2008; and are committed to the higheststandard of quality, meeting or exceeding our client requirements and expectations. We are also committed to complywith our products’ requirements and applicable legal requirements in terms of quality.

We continually improve the effectiveness of our quality management system through: • Hiring the best in class Technology;• Continual improvement of our Performance, and • Maintaining Integrity within our organization.

Also in place is a Quality Management System (QMS) Manual that includes Policies, Processes, Working Procedures andaspects of management and operations that directly impact the Quality of Products, Projects and Services we provide toour clients.

This QMS has been developed and implemented in accordance with the eight Quality Management Principles thatunderpin the ISO 9001:2008 Standard against which we have been certified since 2008:• Client Focus• Leadership• Involvement of People• Process Approach• System Approach to Management• Continual Improvement• Factual Approach to Decision Making• Mutually Beneficial Supplier Relationships

All employees are aware of how the QMS is integral in enabling TigerPROFILES to meet its objectives, satisfy our clientrequirements and comply with all relevant legislation that is appropriate to us and our operations.

We also pay particular attention to meeting those specific client requirements which are not directly met by this QualityManagement System.

Environment, Health and Safety Policies:We take necessary measures to ensure EHS (Environment, Health and Safety) is not compromised during the entiremanufacturing process and is executed as mentioned below: • Full compliance with the Industrial Development Bureau’s (former ZonesCorp) EHS (Environment, Health, and Safety)

Management system requirement, all applicable legislative requirements of the emirate of Abu Dhabi, UAE federal/ labor laws and UAE / international standards for our area of work.

• We consider that Management is most accountable for Environment, Health, and Safety of each employee workingin our premises

• To create an environment of trust, personal integrity, mutual respect, and open communication, thereby,incorporating EHS performance as an indicator.

• To establish an EHS management organization with a clear definition of responsibilities and functions to ensureimplementation of EHS management system.

• To ensure Safe Operations to achieve No Damage to 3rd Parties (Neighbors/ Industrial Sectors Entities / Agencies in thevicinity who could be affected) by giving awareness and promoting safety culture and behavior in the entire factory.

• To ensure that all Risks associated with People, Property, Process, and Environment are adequately identified and managed.• To perform EHS activities of accident prevention and environment protection at the factory, being in line with the

Local Laws, by reducing accident causes by specifying and assessing hazardous elements and risk management. • To promote EHS education and training for TPI and Sub-contractors involved in the Factory in order to ensure

understanding of the EHS policy and to increase awareness of EHS matters. • To ensure that there is continuous improvement in EHS performance, industry ongoing communication while reporting

of EHS incidents and continuous learning from experience to achieve minimal adverse effect to the working environment.• To ensure safety in design, construction, operation, and maintenance of all factory equipment in order to achieve

quality results.

An EHS Compliance statement is in place, rewarding complying behavior and reprimanding violations, to be in line withour full-fledged implementation of our EHS systems.

PRODUCT RANGE

7

Product Range

At TigerPROFILES we pride ourselves on our ability to bring to you a range of special roofing and wall cladding products,

systems and solutions that cater to your most stringent design, performance and cost efficiency needs.

Our Product Range includes:

• Single Skin (non-insulated) roof, wall and floor profiles:

• Roof and Wall: TR 35/200, TR 45/150, TR 45/250, TR 47/180, Sinusoidal 18/76

• Roof: TR 102/275, Roof Tiles

• Floor Deck: TS 47/180, TS 60/300, TS 75/300

• Insulated Panels: our foam (PUR/PIR) and Mineral Wool insulation cores are used with our below products:

• Cold Store Panels and Accessories- our PUR and PIR foam insulated panels are produced through the use of a

patented technology making us the world’s only automated online producer of cold store panels with online

camlock production

• Concealed fix wall panels insulated with PUR, PIR foam or Mineral Wool

• PUR/PIR foam/Mineral Wool insulated trapezoidal roof and wall panels (TR 45/150, TR 45/250) and partition

panels

• Pre-insulated ventilation ductboards and accessories

• Cold formed sections and accessories:

• C channels and purlins

• Z purlins

• Flashing

• Gutters

• Sag Rods

• Studs & Tracks

• Accessories

• T-Seam® - Standing Seam Systems—FM Approved (USA), DBIT Approved (Germany), UAE Civil Defence Approved,

Qatar Civil Defense Approved

• K-Span

• Tiger Engineered Building Systems (TEBs): the ideal systems and/or solutions providing a light-weight pre-galvanized

steel structure complete with roofing and cladding and relevant accessories. Our TEB is the ultimate system for

agriculture requirements including fruit and vegetable, poultry, fish, livestock farms, storage and production.

ROOF, WALL AND FLOOR PROFILES

We produce roof and wall profiles in a variety of

dimensions to suit your different design requirements.

The include:

TR 35/200: A trapezoidal profile characterized by its

corrugated depth of 35mm, pitch of 200mm and its

covered width of 1,000mm.



covered width of 880mm.






covered width of 1,000mm.




Sinusoidal profile 18/76: characterized by height of

18mm and pitch of 76mm.

Our roof and wall profiles are available with their

required accessories including corresponding curved

cave, pre-bent ridge, translucent sheets (sky lights),

flashing and other accessories.

9

Roof, Wall and Floor ProfilesROOF AND WALL PROFILES TR 35/200, TR 47/180, TR 45/150, TR 45/250, TR 75/300, SINUSOIDAL PROFILE 18/76

Single Skin Profile TR 35/200




Deck Profile TR 75/300

Sinosoidal Single Skin Profile 18/76

10

Roof, Wall and Floor ProfilesROOF PROFILES AND TILES TR 102/275, Roof Tiles

11

Roof, Wall and Floor ProfilesFLOOR DECK PROFILES TS 47/180, TS 60/300, TS 75/300

TR 102/275: A trapezoidal profile with corrugated depth

of 102mm, pitch of 275mm and covered width of

825mm.

TigerPROFILES may be the only producer in the region of

this “deep” deck.

This deep deck was especially developed to be used as a

fundamental component of a high performance T-Seam®

built up construction.

Roof Tiles: Our roof tiles serve as a high quality and

efficient replacement for the conventional roof tiles.

Our roof tiles serve as a high quality and efficient

replacement for conventional roof tiles and this is

evident in their characteristics as follows:

• They replace/substitute conventional roof tiles that

are more likely to break or be affected by weather

conditions and discoloration

• Light weight and durable

• Easy to install

• Easily replaced or changed in case of any need to do

so

• Long life with a reduced need for maintenance

Our easily and quickly constructible steel floor decks are

ideal for use in composite slabs, offer an immediate and

safe working platform that reduces upto 30% of the

normally required usage of concrete material while

acting as a permanent formwork and slab as

reinforcements in composite decks. They provide positive

reinforcing for the slab, conventional wood forming is

replaced and temporary shoring can be eliminated.

We produce three different profiles of floor deck that are

characterized by:

• Cost effectiveness

• Ease and speed of installation

• High durability

• Reduced need for concrete

TS 47/180: A trapezoidal profile with corrugated depth


880mm.



900mm, commonly known as a Composite Deck.


of 75mm, pitch of 300mm and covered width of 880mm

– used for Roof and Floor.

TigerPROFILES has, after its own research and

development, developed a different version of its

TR 75/300 roof deck and made it now suitable and

effective to be used as a floor deck, also known as a

Composite Deck.


Roof Tiles



Steel Deck 47/180

Steel Deck 60/300

Steel Deck TS 60/300

Steel Deck 75/300

Steel Deck 75/300



INSULATED PANELS

13

Insulated PanelsINSULATION CORE OPTIONS

We produce Foam Insulation Core panels available inthickenesses as follows:

PUR – (Polyurethane) : with 90% minimum closedcells. Rigid polyurethane (PUR) materials are cellularthermosetting insulation materials that typically form achar/burn when subject to heat and flame impingement.

The char acts as an insulator that affords someprotection to the underlying product. However, PUR willburn by charring and producing significant quantities ofsmoke in the process.

PUR B2: This core produces no flaming droplets duringa fire and is self-extinguishing, which means that thecore stops burning when the heat source disappears.Studies have also shown that a PUR panel that is fixed tothe framework with a continuous mechanical fastenerdoes not fail until the structural framework fails.

PUR B3: This core performs less well in a fire than typeB2. It emits more smoke and produces more heat duringa fire. It is forbidden to use B3 classified insulation inDubai.

PIR – (Polyisocyanurate): with 90% minimum closedcells. Rigid polyisocyanurate (PIR) insulation that isnormally classed as B-s2, d0. A PIR core is a type ofpolyurethane that has undergone significant materialmodification. In the event of a fire the core chars on theexposed side; this charred layer then protects the rest ofthe core from the fire. This means that a panel with a PIRcore is more resistant to fire than a PUR B2 core. It alsoemits less heat and smoke.

These panels, and systems which they belong to, covera number of usages including roofing and wall cladding.They include:

• Cold Store Systems and Panels• Concealed Fix Wall Panels• TR45/150 and TR45/250 Roof and Wall Panels• Pre-Insulated Partition Wall Panels

The light weight of polyurethane rigid foam board alsoprovides an incentive for innovative lightweightconstruction techniques due to its ability – especially inthe form of sandwich panels - to bridge wide spans.

Below is a figure showing examples of the relativethicknesses of alternative building materials needed tomatch the thermal conductivity properties of rigid PUfoam at 50mm.

Item Thickness

Brick 1,720mm

Concrete Block 760mm

Softwood 280mm

Fireboard 130mm

Cork 100mm

Mineral Wool 90mm

Polystyrene 80mm

Polyurethane 50mm

Our PUR and PIR sandwich panel cores are approved andcertified by Dubai Municipality as Class E against thestandard BS EN 13165: 2008 (Thermal Insulationproducts for buildings – Factory made rigid polyurethanefoam (PUR) products).

We produce a range of both team and mineral woolinsulated panels in our continuous production facility inAbu Dhabi.

Mineral Wool Insulation Core: available in thicknessesfrom 50-200mm.

Mineral fibre/stone wool insulating core materials areclassified as as A2-s1, d0 non-combustible and arereliable fire protection materials, since they are bothnon-combustible and do not conduct heat. This meansthat it will not spread fire and can withstandtemperatures above 1000ºC.

When incorporated within a sandwich panel structuremineral fibre/stone wool insulating core materials aresuitable for a range of applications where fire retardantproperties are essential, for example internal andexternal walls, ceilings and partitions.

The mineral wool we use is approved by DubaiMunicipality and Dubai Civil Defense against ASTMC612 and BS EN 13162.

14

Insulated PanelsCold Store Panels

15

Insulated PanelsCold Store Panels

with craft paper (as required).

Eco-Friendly Advantages of our Cold Store Panels:

• Excellent R and U values for roof and walls

• No thermal bridges and thus able to significantly

lower HVAC costs—with excellent air and water

tightness;

• Superior airtightness performance;

• Negligible reduction in long term thermal resistance

R-value;

• No formaldehyde is present in our raw material

supply nor is it added to our products in any stage

during manufacturing

• Lightweight for easy and speedy assembly; strong

support and available in long spans;

• Greatly decreases carbon emission of buildings;

• Eco-friendly production that allows panels to be

manufactured with the use of N-pentane blowing

agents that have ZERO DOP and GWP less than

eleven;

• Qualified to contribute to LEED certification

requirements;

Besides being weather tight, and the core approved by

Dubai Central Laboratory our panels are tested and

classified as Class E against EN 13501-1. Our panels are

also eco-friendly and ensure premium thermal insulation

& fire resistance properties.

(1) Automated hi-speed continuous production.

(2) Cam-lock is a locking device consisting of a pin and

a cam on the other side which when used within a

panels, ensures tight fitting, easier and faster to

install versus ensure quality it was designed for in

terms of aesthetics and performance.

* International Patent and Design Applications Pending; PCTApplication No. PCT/NZ2013/000066; Kuwait Patent Application

No. 26/2013; Saudi Arabia Patent Application No. 113340432;

Iraq Patent Application No. 106/2013; United Arab Emirates

Design Application No. 369/2012.

To give you added value with our Cold Store Panels, we

present our Tiger Engineered Building Systems (TEBs), an

innovative pre-engineered building system that is

custom designed to suit every aspect of your needs.

Combined with our premium cold store panels and

accessories, TEB is your ideal, cost efficient, speedy,

eco-friendly and durable solution for all your cold and/or

dry storage, refrigeration and chiller requirements.

As a specialized one-stop-shop, we offer you this full

range of requirements to build a high-quality and cost

efficient cold store, chiller.

• TEBs to form the structure containing, or housing

your cold store. This is produced from our hi-tensile,

light weight, pre-galvanized c sections

• Premium, DCL approved cold store panels produced

with online camlocks

• Doors with their accessories

• Flooring

• Partitions

• Sectional roofs for outdoor walk-ins

• Pressure relief ports

• Modular shelving

• Temperature alarms

• Door ramps

• Floor racks

• Floor and ceiling edges and caps

Cold Store Panel

Even the best quality products do not stand a chance

when it comes to surviving in unsuitable storage

conditions.

Whether its meat, fruits, vegetables or dairy products

your promise of quality to your clients can only be

achieved through the smart use of premium cold

storage systems that guarantee your product to be

fresh, halal, a high quality one or even just the fact that

it fits for human consumption.

Our PUR and PIR foam insulated cold store panels are

produced through the use of a patented* technology

making us the world’s only automated online producer

of cold store panels with online(1) camlock(2) production.

This technology allows us to guarantee unparalleled

speed of delivery and a better ability to maintain high

quality density. This leads to excellent control of non-

shrinkage and bubbling of the panel, resulting in a

clean, tight fit of the panels and a clean aesthetic look

as an end result. Of course, the tight fit ensures that

there is minimal transfer of heat and energy loss that

regularly causes rising energy costs for end-users that

can be prevented.

Our insulated panels can be used for dry stores, chillers,

freezers and blast freezers. They can be used for plant

and food consumables, grains, pulses and spices, meat,

poultry, fish and dairy products in all heir different

varieties. In addition, a smartly designed store enables

food processing, fermentation of produce and

controlled temperature storage in the safest and

cleanest environment. We are able to produce our

panels in a range of finishes, and with a selection of

finishes, both standard and special, including food safe

coatings.

To maintain the performance of our cold store panels,

we also produce and supply you with two floor panels

options:

• Re-inforced with 12mm marine plywood and other

side Galvanized Iron sheeting or;

• Polyurethane Board with aluminum foil both sides or

16

Insulated PanelsConcealed Fix Wall Panels

Our Concealed Fix Wall Panels hold great aesthetic

appeal due to their ability to be installed both vertically

and/or horizontally. Their “smart” installation method

allows for easy replacement of any damaged panels due

to the ability to remove just a few panels and replace the

damaged one(s) while easily replacing the panels back

after completion.

Characteristics

• Suitable for residential, industrial and commercial

applications

• Simply and quickly assembled in a side-by-side

overlapped relation that offers an attractive, flat wall

appearance

• Watertight and present a durable resistance to most

weather conditions

• Outstanding insulating properties due to the superior

chemical structure of the PUR/PIR foam insulation

core

• Low dead weight due to combination of lightweight

materials

We produce a range of designs for our concealed fix wall

panel facings:

• Micro Rib

• Vee V-Plus

• Vee V-Rib

• Shallow Rib

• Stripe

Their appearance is greatly enhanced by their hidden

performance strengths. Our panels have successfully

passed testing to ASTM E84 that classifies them with

Class A Surface Burning Characteristics, and the panels

have successfully passed the requirements for the Flame

Spread Index (FSI) and Smoke Developed Index (SDI) and

in addition to their foam cores being approved &

certified by Dubai Municipality against BS EN 13165 and

their mineral wool core being approved by Dubai

Municipality and Dubai Civil Defense against ASTM

C612 and BS EN 13162.

Concealed Fix Wall Panel - V-Plus

Concealed Fix Wall Panel - V-Rib

Concealed Fix Wall Panel - Micro Rib

Concealed Fix Wall Panel - Shallow Rib

17

Insulated PanelsTongue and Groove (Partition) Panels

Vee Rib Panel

Shallow Rib Panel

Micro Rib Panel

Our tongue and groove panels, also known as celling

and internal wall partition panels, can be utilized for:

• Internal partitioning for industrial, commercial, retail,

and residential buildings.

• Wall Cladding in applications such as portacabins.

They are available in different designs:

• Micro rib

• Vee plus

• Vee rib

• Shallow rib

• Stripe

Our panels are available in both foam and mineral wool

insulation cores, both of which are approved by Dubai

Municipality.

As all our panels including cold store and concealed fix

panels, our partition panels are characterized by being:

• Excellent R and U values for roof and walls

• No thermal bridges and thus able to significantly

lower HVAC costs—with excellent air and water

tightness;

• Superior airtightness performance;

• Excellent acoustic performance

• Negligible reduction in long term thermal resistance

R-value;

• No formaldehyde is present in our raw material

supply nor is it added to our products in any stage

during manufacturing

• Lightweight for easy and speedy assembly; strong

support and available in long spans;

• Greatly decreases carbon emission of buildings;

• Eco-friendly production that allows PUR/PIR foam

insulated panels to be manufactured with the use of

N-pentane blowing agents that have ZERO DOP and

GWP less than eleven;

• Qualified to contribute to LEED certification

requirements;

• Available with our metal stud and track partitioning

system

Vee Plus Panel

TR 45/250

18

Insulated PanelsTR 45/150, TR 45/250 Trapezoidal Panels

Insulated Panels

We produce our insulated/sandwich panels for Roofs

and Walls in the following profiles:


of 45mm, pitch of 150mm and covered width of 900mm.


of 45mm, pitch of 250mm and covered width of 900mm.

Our insulated panels are produced with a variety of

cores – each with its own advantages and applications.

The core materials provide many of the panels’ desirable

properties. They include PUR, PIR foam and Mineral

Wool with standard specifications.

Our insulated panels are free from CFCs/HCFCs, which

means they do not have any negative impact on the

Earth’s ozone layer. Our foam insulated panels are

produced with blowing agents that are characterized by

Zero Ozone Depletion Potential and a global warming

potential of less than eleven. Our panel cores (Foam and

Mineral Wool) are approved by DCL.

Our panels are suitable for multi-purposes including

industrial, commercial, residential and aviation sectors.

Being available in multiple material, finishing, and color

options, they are well utilized for their:

• Outstanding thermal insulation, acoustic, fire,

environmental performance

• Premium quality

• Excellent cost efficiency

• High speed production and delivery

• Exceptional added value

• And of course the engineering support that is a given

for all our clients

As with all our wall cladding products, our TR 45/150

and TR 45/250 sandwich panels are available with a

range of accessories that ensure all your requirements

are efficiently met.

TR 45/150

TR 45/250

TR 45/250

TR 45/150

TR 45/150

PRE-INSULATED VENTILATION DUCT BOARDS & ACCESSORIES

We produce pre-insulated ventilation duct boards in a

range of dimensions using hi-index PIR foam insulation.

Our duct boards are:

• Economical & cost effective.

• Light weight resulting in reduced dead weight for any

construction.

• Fast to install increasing speed of pace of

construction due to ease in handling, workability &

joineries.

• Improves thermal efficiency, minimizes loss due to

leakages & reduces cost of power.

• Free from crevices and fissures — doesn’t allow the

development of germs & microbes.

• The ducting can be painted to match the color

scheme of main construction if required

To complement our prime pre-Insulated ventilation duct

boards, we have collaborated with a renowned

Australian manufacturer of state of the art accessories

and technologies to provide you with a comprehensive

range of components for your ventilation system. Air

Diffusion is a leading Australian manufacturer and

supplier of quality, innovative air conditioning and

refrigeration components to the industry, and a holder

of several patented products.

These products, brought to the Middle East by

TigerPROFILES, are available with a multitude of options

customized to your requirements. Please do not hesitate

to contact us to advise you on which components will

serve your needs best.

21

Pre-Insulated Ventilation Duct Boards & AccessoriesProduct Data

Pre-Insulated Ventilation Ducts

Pre-Insulated Ventilation Ducts

23

COLD FORMED PROFILES & ACCESSORIES

Cold Formed Profiles & AccessoriesZ-Purlins & C-Channels, Sag Rods

C Purlin

Z Purlin

Cold roll-formed to client needs

Z-purlins / C-channels are the secondary structuralmembers used to support the roof sheeting / wall cladding.

Our facilities are well equipped for producing Z-purlinsand C-channels, which are the secondary structuralmembers used to support the roof sheeting and wallcladding.

Flange widths / lip size / flange angles of the sections canbe set in the machine, as per the requirement of the client.

Besides being economical to use, these purlins andchannels sections give an excellent strength- to- weightratio, thus giving tremendous cost savings. They aremanufactured from galvanized coils conforming toASTMA653/A653M, SS Grade 50 (340) Class 1, Grade Dhaving a yield strength of 340 Mpa.

The range for depth of these purlins varies from 100mmupto 450mm and thickness varies upto 3.5mm.

The purlins and channels are custom made to the desiredsize having the flexibility of its connection to the mainstructure either by overlapped system or sleeved system.

Characteristics• High strength to weight ratio;• Economical;• Can be used for large spans upto 11.0m;• Better quality and finish;• Quick installation;• Custom made to requirement

The TigerPROFILES Bridging or Purlin Sag Rod system is themost adaptable and flexible Sag Rod system available, tosecurely brace both Z and C purlins and girts of depths100, 150, 200, 250, 300, 350 and 400mm. It is also fastand easy to install and can accommodate mostconstruction configurations.

The system consists of solid Sag Rod assemblies betweenpurlins and girts, proving accurate and fast purlin bracingwith no adjustments required.

ComponentsThe basic parts of each Tiger Sag Rod assembly are thelocators and Flip Locks. They firmly lock each purlin orgirt in position when simply located and hooked into theSag Rod holes from opposite sides of the web.

Locators and clamps have hook centers to match theholes punched in the webs of purlins and girts.

Sag Rod assemblySag Rod assemblies are supplied in lengths to suit thenominated purlin or girt spacing.

Anti-Sag Rod Detail (Quick Lock System)

24

Cold Formed Profiles & AccessoriesFlashing and Accessories

Cold Formed Profiles & AccessoriesMetal Stud Partition

25

PARTITION STUDS & CEILING GRIDS

Our “Metal Furring Suspended Ceiling System” presents

itself as the ideal solution to the dilemma of suspending

ceilings without the incorporation of visible joints or

exposed supporting members, thus allowing for a

smooth finished ceiling.

Specially selected galvanized steel is used in the

production process of all the studs and related

accessories, and our international conforming standards

are based on the following specifications:

After extensive research, all dimensions have been

carefully determined to suit the market requirements and

available insulation infill materials. Ensuring availability

and client support is no longer an issue of concern prior

to ordering since the flexibility of the production

scheduling allows immediate processing of special orders

at clients’ request to avoid delays in supply.

Metal Stud Partition

Metal stud partitions’ sections are lightweight, nonload

bearing and quickly assembled on site. They provide low

cost partitions suitable for all types of buildings. Erection

can be carried out by one man. The erection time varies

depending on the condition of the fixing surfaces and

the optional components to be fitted. An estimated

erection time is 2 to 3m2 per man hour for a single layer

partition, and 1.5 to 2 m2 per man hour for a 100 mm

double layer partition.

In order to accommodate simple plumbing and electrical

conduits’ penetrations, TigerPROFILES provides punched

openings at regular intervals.

Ceiling Grids

TigerPROFILES’ components are composed of:

- Angle 25

- Furring channel 39

- Main channel 38

This system is manufactured to accommodate 60x60 tiles

panel.

Stud & Track

Bottom cover finish

The visible bottom flange is 24 mm wide and is covered

in white color coating capping. We can also offer the

capping in a wide range of color shades.

By definition, flashing refers to thin continuous pieces ofsheet metal installed to prevent the passage of waterinto a structure from an angle or joint. Flashing may beexposed or concealed. Exposed flashing is usually of asheet metal, such as aluminum, or painted galvanizedsteel. Metal flashing should be provided with expansionjoints on long runs to prevent deformation of the metalsheets. The selected metal should not stain or be stainedby adjacent materials or react chemically with them.

Flashing can assume a number of forms including:

Roof flashing is placed around discontinuities or objectswhich protrude from the roof of a building (such as pipesand chimneys, or the edges of other roofs) to deflectwater away from seams or joints.

Wall flashing may be embedded in a wall to direct waterthat has penetrated the wall back outside, or it may beapplied in a manner intended to prevent the entry ofwater into the wall. Wall flashing is typically found atinterruptions in the wall, such as windows and points ofstructural support.

In addition to flashing, our production capabilities enableus to cater to highly demanding design requirements.With a very flexible aptitude for complicated shapes anddesigns the flashing options that we produce are ideallyused to seal membrane edgings at walls, expansionjoints, drains, gravel stops and other places where themembrane, cap or counter flashing shields the upperedges of the base flashing.

We provide our clients with a comprehensive range ofaccessories and fixing components that include:

• GI Self-tapping drilling screws with neopreneavailable in both carbon and stainless steel

• SS Self-tapping drilling screws with neopreneavailable in both carbon and stainless steel

• Butyle Sealant tape• Purlin Tape• PVC Tape• PVC Color Caps• Aluminum Rivets• Bulb-tite Rivets• Filler Blocks matching with the Sheet Profiles• Silicon Sealant

Customized Flashing

Customized Flashing

Customized Flashing

Customized Flashing

T-SEAM® (STANDING SEAM SYSTEMS)

T-Seam® belongs to the family of standing seam roofingsystem, wherein the roof sheets are fixed to the structurewithout puncturing the sheets. This is possible by usingspecially designed aluminum extruded seam clips. Theadjacent seams of the T-Seam® sheets are overlappedover the aluminum extruded clips and closed with anelectrically operated seaming machine. The specialdesign feature of the seam clips allows for the expansionmovements of the T-Seam® panel while at the sameresisting the wind uplift forces.

Our own brand of standing seam solutions comescomplete with internationally recognized approvals, athorough accumulation of experience and an acquiredability to cater to highly complicated requirements. T-Seam® is the ideal solution for projects where designflexibility, superior performance and outstandingdurability are key. Roll-formed in the factory or on site,the roof sheets, which can be formed in lenghtsexceeding 100m in a single panel, are easily fixed to thestructure. The lack of need for the penetration thesheets, eliminates the risk of water leakage and rust.

With superior weather - tightness and a,maintenance-free life, T-Seam® roofs are the popularchoice for new construction, retrofit applications andexpansions to existing buildings. T-Seam® roofs easilyprovide beyond 15 years of superior maintenance-freeperformance.

T-Seam® roofs are engineered to withstand rain, windsnow and sun, in addition to their ability to endure thenegative effects arising from thermal expansion.

Ideal for use on new buildings as well as retrofitapplications, standing T-Seam® profiles are available invarious widths and heights to accommodate almost anyproject. In most instances, T-Seam® panels are rollformed on site by a portable T-Seam® manufacturingmachine, thereby incurring less chance for panel damageduring shipping.

Properly installed standing T-Seam® metal roof willprovide longevity with very little maintenance.

This exceptional return on investment makes theT-Seam® design the most cost-effective choice for clients.

27

T-Seam® (Standing Seam Systems)

T-Seam® 65/500

500

65

T-Seam® 65/400

400

65

T-Seam® 65/305

305

65

Aluminium flat composite panel or solid panel (optional)

Aluminium subframeT-Seam top sheet

Rock Wool insulationLiner panel GI or Aluminium

Vapor barrierAluminium Clip with thermal pad

Top hat suppoort GISteel purlin

T-Seam® built up sample

Straight T-Seam® Convex T-Seam®

Tapered T-Seam®Concave T-Seam®

Standard Sizes

Shapes

K-SPAN SYSTEM

The K-Span system manufactured by TigerPROFILES meets

the requirements for commercial, industrial, agricultural,

military, aviation or institutional pre-engineered

buildings.

Similar to T-Seam® panels, our panels are roll formed on

site to your required length using the portable roll

forming machine. These panels are self-supporting and

modular. The K-Span foundation is prepared and the

panels are connected in a straight or arched fashion and

are shaped into a solid unit as per your design

requirements.

The final shape and strength of the materials used

cancels the need for columns, beams, or any other type

of interior support. This ensures that the built up space

inside the K-Span structure can be fully utilized for the

purpose it was built, with minimal constriction in space

and movement. The need for conventional steel

structures is eliminated, thus drastically reducing the

overall time and cost required to get from concept to

reality.

All of the panel-to-panel connections are joined using a

seaming machine that eliminates the need and presence

of holes, nuts, bolts, or any other type of fastener to

slow down construction or create leaks.

Characteristics

• Durability – life time waterproof seams

• Versatility – adapts to a wide variety of design

functions

• Can be used together with conventional structures

• Speed of construction

• Lower construction and maintenance cost

• Easy to expand and modify

• Advantageous in retrofit projects

29

K-Span System

K-Span profile

TIGER ENGINEERED BUILDING SYSTEMS

The latest addition to our system range is our TEBs -Tiger Engineered Building Systems. Far more superiorto conventional PEBs - Pre-Engineered Building Systemsin dimensional flexibility, design ability, productioncapability and cost efficiency, our TEBs are your idealsolution for protection of your investments and assets ina range of industries, including agriculture, farming,manufacturing, commercial, industrial and warehousing.

Our TEBs - Tiger Engineered Building Systems aremanufactured from cold formed galvanized high tensilesteel sections which are more cost effective, faster toconstruct and much more energy efficient thanequivalent hot rolled portal frame buildings.

Our TEBs are environmental friendly, with a carbonfootprint emission of 86 kg CO2 e per tonne less thanhot rolled portal frame buildings. Our TEBs do notrequire further manufacturing and are delivered directfrom the rollforming plant to the building site, resultingin substantial savings in both money and time.

TigerPROFILES TEBs are suitable for light industrial,commercial, rural & domestic applications.

Software We have in place a software platform which designs,costs and orders its TEBs.

The simple interface allows us to design buildings fromsmall domestic sheds to large industrial and commercialfactories. In fact, it is so easy to use that even thosewithout experience can design a tailor made buildingunique for each client, in just minutes. From the initialquote to finalizing the building order, the softwareaccurately details:

• Prices • Hole Punch Details• Portal Frame Dimensions• Supplier Purchase Orders• Bill of Materials• Concrete Footing Details• Architectural Drawings• Detailed Client Quotations

31

TEBs – Tiger-Engineered Building Systems

High Tensile Galvanized Bolted Construction

Can be used with our roofing and cladding products

Agricultural, commercial and personal usage

PROJECT REFERENCES

Some Project ReferencesProject Client Area (m2)

33

MRO & Cargo Facilities - Muscat International & Salalah Airport, Oman* Tiger Steel Engineering LLC 100,000 & 50,000

Emirates Aluminium Smelter Complex - Abu Dhabi, UAE SNC-Lavlin & Worley Parsons 500,000

King Abdullah Petroleum Studies and Research Center (KAPSARC) Saudi Aramco 90,000- Riyadh, Kingdom of Saudi Arabia

Gulf Cement Company - Doha, Qatar Simplex Infrastructure Ltd 72,400

World Trade Centre - Doha, Qatar Gulf Steel Industries (Arab Tech) 60,000

Cargo Mega Terminal Building, Dubai Intl Airport - Dubai, UAE Dubai Civil Aviation 45,000

Sheikh Saeed Exhibition Halls, Dubai World Trade Center - Dubai, UAE DWTC 43,000

Relocation of Airport Expo & Related Facilities to Dubai World ALEC 40,500Trade Center - Dubai, UAE

EFS-PROJECT, Qatar Steel - Doha, Qatar Tiger Steel Engineering LLC 38,500

Emirates - Light Maintenance Hangars - Dubai, UAE Tiger Steel Engineering LLC 38,100

Emirates Engine Maintenance Center - Dubai, UAE Khansaheb Civil Engineering LLC 22,000

Duqm Dry-Dock - Duqm, Oman Bilad (Oman) LLC 21,000

Siemens DGEN Cladding Package - Gujarat, India JSW Severfield Structures Ltd. 20,000

Zabeel Hall, Dubai World Trade Center - Dubai, UAE DWTC 20,000

EMAL - Phase-2, Offshore Conveyor Project - Abu Dhabi, UAE SENET 14,000

Dubai Intl Airport Cargo Mega Terminal Expansion-Phase III - Dubai, UAE ALEC 13,500

EMAL-Phase-2, Carbon Area, Anode Baking Furnace-3 - Abu Dhabi, UAE Mosaco Metal Products 13,100

EMAL-Phase-2, RD1101G-Pot Demolition Bldg - Abu Dhabi, UAE Tiger Steel Engineering LLC 12,500

Al-Ain University - Abu Dhabi, UAE Mubdala 12,000

Nestle Manufacturing Facilities - Dubai, UAE* Al Shafar General Contrcting LLC 12,000 & 10,000

Etihad Rail - Mirfa Depot - Abu Dhabi, UAE Dodsal Engineering Pte Ltd 11,000

College of Business Studies, Girls Campus - Kuwait, Kuwait Public Authority for Applied 11,000

Dubai Intl Airport Terminal-1 Upgrade - Dubai, UAE* ALEC 11,000

Burj Dubai Development - Dubai, UAE Sumsung-Baytur J.V. 10,200

Al Barsha Mall - Dubai, UAE Union Cooperative Society 10,000

International Convention Center - Sri Lanka Daebo Engineering & Construction 10,000

Sohar Aluminium, Sohar - Oman Bilad (Oman) LLC 9,000

BMW, Showroom, Abu Dhabi Motors - Abu Dhabi, UAE Gulf Steel Industries 8,500

MW-AF-315-2007, Air Craft Hanger - Abu Dhabi, UAE (ALGECO) UAE Armed Forces 8,100

Dubai Aluminium (DUBAL) - Casthouse (Phase 1-6) - Dubai, UAE Waagner Biro Gulf 7,000

Preserve of Forensic Evidence Warehouse - Abu Dhabi, UAE* Raslan General Contracting LLC 7,000

Royal Flight, Seeb, G5 - Hangar, Muscat, Oman* IACOVOU GCC 6,000

Abu Dhabi Airport - Transfer Baggage Handling Facility-T2 - Abu Dhabi, UAE ALEC 6,000

The Avenues Phase-2 - Dubai, UAE Notredame Metal Construction 6,000

MCC Race Track Mall - Oman* Douglas OHI LLC 6,000

*2015

Project References - Commercial Sector

Para

gon

Mal

l, Re

em Is

land

, A

bu D

habi

- U

AE

Prod

uct:

T-S

eam

®A

l Bar

sha

Mal

l - D

ubai

, U

AE

Prod

uct:

T-S

eam

®

34


Dra

gon

Mar

t -

Dub

ai,

UA

E Pr

oduc

t: P

urlin

s &

Cha

nnel

s M

all O

f Th

e Em

irate

s Ex

pans

ion

- D

ubai

, U

AE

Prod

uct:

Insu

late

d Ro

of &

Wal

l Cla

ddin

g

35


Add

ress

Hot

el -

Dub

ai,

UA

E Pr

oduc

t: T

-Sea

m®

and

Dec

k Pr

ofile

s N

ew E

xhib

ition

Hal

ls Ex

pans

ion,

Dub

ai W

orld

Tra

de C

ente

r -

Dub

ai. U

AE

Prod

uct:

T-S

eam

®

36


BMW

Sho

wro

om,

Abu

Dha

bi M

otor

s, A

l Maf

raq

- A

bu D

habi

, U

AE

Prod

uct:

Insu

late

d Ro

of P

anne

lsRo

sew

ood

Hot

el -

Abu

Dha

bi,

UA

E Pr

oduc

t: T

-Sea

m®

37


Shei

kh S

aeed

Hal

ls -

Dub

ai W

orld

Tra

de C

ente

r, U

AE

Prod

uct:

T-S

eam

®an

d C

once

aled

Fix

Wal

l Pan

els

Qat

ar W

orld

Tra

de C

ente

r -

Doh

a, Q

atar

Pr

oduc

t: F

loor

Dec

k Pr

ofile

s

38


The

Ave

nues

- D

ubai

, U

AE

Prod

uct:

T-S

eam

®Za

beel

Hal

l, D

ubai

Wor

ld T

rade

Cen

ter

- U

AE

Prod

uct:

T-S

eam

®

39

Project References - Aviation Sector

Airs

how

, D

ubai

Wor

ld C

entr

al -

Dub

ai,

UA

EPr

oduc

t: T

-Sea

m®

and

Insu

late

d Ro

of W

all P

anel

sD

ubai

Inte

rnat

iona

l Airp

ort,

Car

go M

ega

Term

inal

- D

ubai

, U

AE

Prod

uct:

T-S

eam

®

40


Exec

utiv

e Je

t Te

rmin

al @

Al M

akto

um In

t’l A

irpor

t D

WC

- D

ubai

, UA

EPr

oduc

t: T

-Sea

m®

Emira

tes

Engi

neer

ing

Cen

ter

- D

ubai

, U

AE

Prod

uct:

T-S

eam

®an

d C

once

aled

Fix

Wal

l Pan

els

41


Mus

cat

Airp

ort

MRO

Han

gars

- M

usca

t, O

man

Pr

oduc

t: T

-Sea

m®

and

Con

ceal

ed F

ix W

all P

anel

sC

argo

Bui

ldin

g, M

usca

t A

irpor

t -

Mus

cat,

Om

an

Prod

uct:

T-S

eam

®an

d C

once

aled

Fix

Wal

l Pan

els

42


Sala

lah

Airp

ort

MRO

Han

gars

- O

man

Pr

oduc

t: T

-Sea

m®

and

Con

ceal

ed F

ix W

all P

anel

sM

usca

t A

irpor

t C

argo

Meg

a Te

rmin

al -

Mus

cat,

Om

an

Prod

uct:

T-S

eam

®an

d C

once

aled

Fix

Wal

l Pan

els

43


Etih

ad T

rain

ing

Aca

dem

y Ex

tens

ion

- A

bu D

habi

, U

AE

Prod

uct:

T-S

eam

®Em

irate

s En

gine

s M

aint

enan

ce C

ente

r -

Dub

ai,

UA

E Pr

oduc

t: T

-Sea

m®

44

Project References - Recreation Sector

Shuw

aikh

Edu

catio

nbal

Cam

pus

Stad

ium

- K

uwai

t Pr

oduc

t: F

loor

Dec

k Pr

ofile

sM

eyda

n Re

ceiv

ing

Barn

s C

ompl

ex -

Dub

ai,

UA

E Pr

oduc

t: T

-Sea

m®

45


Ice

Skat

ing

Rink

, D

ehra

dun

- In

dia

Prod

uct:

T-S

eam

®M

otio

n G

ate

Them

e Pa

rk -

Dub

ai,

UA

E Pr

oduc

t: P

urlin

s

46


Shei

kh Is

a Sp

orts

City

- M

anam

a, B

ahra

in

Prod

uct:

T-S

eam

®H

azza

Bin

Zay

ed S

tadi

um -

Al A

in,

UA

E Pr

oduc

t: P

urlin

s &

Cha

nels

47

Project References - Education Sector

ABM

Mili

tary

Col

lege

& H

ospi

tal -

Doh

a, Q

atar

Pr

oduc

t: T

-Sea

m®

King

Abd

ulla

h Pe

trol

eum

Stu

dies

and

Res

earc

h C

entr

e - R

iyad

h, S

audi

Ara

bia

Prod

uct:

T-S

eam

®an

d D

eck

Prof

iles

48


Col

lege

of

Busi

ness

Stu

dies

Girl

s C

ampu

s -

Kuw

ait

Prod

uct:

T-S

eam

®G

ulf

Uni

vers

ity o

f Sc

ienc

e &

Tec

hnol

ogy

- K

uwai

t, K

uwai

t Pr

oduc

t: T

-Sea

m®

49


Mas

dar

Inst

itute

of

Tech

nolo

gy -

Abu

Dha

bi,

UA

E Pr

oduc

t: T

-Sea

m®

Zaye

d U

nive

rsity

- A

bu D

habi

, U

AE

Prod

uct:

T-S

eam

®

50


Al A

in U

nive

rsity

- A

l Ain

, U

AE

Prod

uct:

T-S

eam

®V

icto

ria In

tern

atio

nal S

choo

l of

Shar

jah

- Sh

arja

h, U

AE

Prod

uct:

T-S

eam

®

51

Project References - Culture Sector

Qat

ar N

atio

nal L

ibra

ry -

Doh

a, Q

atar

Prod

uct:

TS

47/1

80 D

eck

Prof

iles

and

Purli

ns

Roya

l Ope

ra H

ouse

- M

usca

t, O

man

Pr

oduc

t: T

-Sea

m®

52

Project References - Culture Sector

Mas

dar

Hea

d Q

uart

ers

- A

bu D

habi

, U

AE

Prod

uct:

Pur

lins

& F

lash

ing

Mus

eum

of

Isla

mic

Art

s -

Doh

a, Q

atar

Pr

oduc

t: T

-Sea

m®

53

Project References - Industrial Sector

EF 5

, Q

atar

Ste

el -

Qat

ar

Prod

uct:

Sin

gle

and

Insu

late

d Ro

of a

nd W

all C

ladd

ing

Maa

den

Alu

min

ium

- S

audi

Ara

bia

Prod

uct:

Pur

lins

54

Project References - Industrial Sector

1200

MW

CC

P (D

GEN

), Si

emen

s -

Guj

arat

, In

dia

Prod

uct:

Sin

gle

Skin

Cla

ddin

g EM

AL

Alu

min

ium

Sm

elte

r -

Abu

Dha

bi,

UA

E Pr

oduc

t: S

ingl

e Sk

in C

ladd

ing

55

the imperatives of the distinct industries they proudly

serve:

• Oil & Gas and Petrochemical Industries:

• Process Structures

• Pipe Racks

• Platforms

• Equipment Supports

• Plate works for stacks, tanks, chimneys, ducting

and vessels

• Associated miscellaneous steel, such as handrails,

ladders, flooring.

• Power and Industrial Industries:

• Cement Plants

• Preheater Towers

• Power Station Turbine Buildings

• Desalinization Plants

• Warehouses

• Factories

• Workshops

• Plate works for stacks, tanks, chimneys, ducting.

• Infrastructure Projects:

• Airport Terminals

• Aircraft Hangars

• Metro Stations

• Bridges

• Cargo Buildings.

• Governmental and Commercial buildings:

• Educational Facilities

• Recreational Centres

• Shopping Malls

• Hospitals

• Hospitality Facilities

• High-rise towers

For more info about TigerSTEEL, please visit

www.TigerSTEEL.net

In 2015, TigerPROFILES established its trading arm -

TigerPROFILES BUILDING MATERIALS TRADING LLC. Based in

Dubai, TigerPROFILES caters to the region’s requirements

for premium building materials. For more info about

TigerPROFILES, please visit www.TigerPROFILES.com

The Tiger Group

The UAE-based TigerGROUP, was founded in 1968 by

Lebanese brothers Robert and Aziz Nasr.

The first Tiger Company was founded in Dubai in 1968,

with the aim of serving the construction industry in the

UAE and the rest of the Gulf. The vision was to create a

group that would be self-sufficient in serving itself and

the construction industry’s needs in the Middle East.

Over the next three decades, five more companies were

launched, each specializing in various segments of the

industry such as manufacturing, contracting and trading.

In 1968, TigerSTEEL ENGINEERING was launched for the

manufacturing of steel structures, warehouses, industrial

plants, tanks and silos as well as other related steel

works.

Today TigerSTEEL is an integrated structural steel solution

provider whose diverse range of products covers all areas

of steel fabrication including:

1. Heavy built-up assemblies (super structure work)

2. Hot Rolled steel structures

3. Secondary steel (platforms and walkways)

4. Miscellaneous works (handrails and ladders)

5. Plate works (stacks, ducts, tanks and vessels)

TigerSTEEL offers flexible, tailor-made solutions and

simultaneously manages projects that range from light to

heavy steel structures with diverse applications. This is

attained through seamless logistics and specialized

coordination of production, at the plants in Sharjah and

Abu Dhabi.

The result is a yearly production capacity of 48,000 to

60,000 tons of structural steel and enhanced products.

With landmark projects developed internationally,

TigerSTEEL geographical footprint encompasses projects

in the G.C.C., North African and South East Asian

countries.

The following areas of specialization and their

applications have consolidated TigerSTEEL line of

expertise, while services have been adapted to better suit

56

T: +971 6 5338449 F: +971 6 5336673

P. O. Box 23499, Sharjah, United Arab Emirates

E: [email protected]

www.TigerPROFILES.com

/TigerPROFILES

The Roof & Cladding Company

At TigerPROFILES we pride ourselves on our ability to bring to you a range of special roofing and wall claddingproducts, systems and solutions that cater to your most stringent design, performance and cost efficiency needs.

Our Product Range includes:

• Single Skin (non-insulated) roof, wall and floor profiles: • Roof and Wall: TR 35/200, TR 45/150, TR 45/250, TR 47/180, Sinusoidal 18/76• Roof: TR 102/275, Roof Tiles• Floor Deck: TS 47/180, TS 60/300, TS 75/300

• Insulated Panels: our foam (PUR/PIR) and Mineral Wool insulation cores are used with our below products:• Cold Store Panels and Accessories- our PUR and PIR foam insulated panels are produced through the

use of a patented technology making us the world’s only automated online producer of cold storepanels with online camlock production

• Concealed fix wall panels insulated with PUR, PIR foam or Mineral Wool • PUR/PIR foam/Mineral Wool insulated trapezoidal roof and wall panels (TR 45/150, TR 45/250) and

partition panels

• Pre-insulated ventilation ductboards and accessories

• Cold formed sections and accessories:• C channels and purlins• Z purlins • Flashing• Gutters• Sag Rods• Studs & Tracks• Accessories

• T-Seam® - Standing Seam Systems—FM Approved (USA), DBIT Approved (Germany), UAE Civil DefenceApproved, Qatar Civil Defense Approved

• K-Span

• Tiger Engineered Building Systems (TEBs): the ideal systems and/or solutions providing a light-weightpre-galvanized steel structure complete with roofing and cladding and relevant accessories. Our TEB is theultimate system for agriculture requirements including fruit and vegetable, poultry, fish, livestock farms,storage and production.

T h e R o o f & C l a d d i n g C o m p a n y

Documents

tpi 6088 Corp Catlog rev-7 - Tiger Profiles · Our systems and solutions product line includes roof and wall profiles, floor deck panels, sandwich panels, concealed fix wall panels,