Toshiba Regza 32lv833

7/22/2019 Toshiba Regza 32lv833

1/64


2/64

2

ContentsSafety Precautions ....................5

Air Circulation ...................................... 5

Heat Damage ...................................... 5

Mains Supply ....................................... 5Do ........................................................ 5

Do not .................................................. 5

Installation and importantinformation .................................6

Where to install.................................... 6

When using a Wall Bracket ................. 6

The Remote Control ..................12

Inserting batteries and

effective range of the remote ............... 12

Connecting ExternalEquipment ..................................13

HDMI-LINK Connections ...........15

Connecting an HDMI or DVIdevice to the HDMI input...........16

To connect an HDMI device ................ 16

To connect a DVI device...................... 18

Connecting a Computer ............20

To connect a PC to the HDMI

terminal................................................ 20

Acceptable Video signals through HDMI

terminals .............................................. 22

Acceptable PC signals through HDMI

terminals .............................................. 22

Digital On-Screen Informationand Programme Guide ..............23

Information .......................................... 23On-Screen Information Icons .............. 23

Guide ................................................... 23

Frequently Asked Questions ....24

Using the Controls ....................26

Switching On ....................................... 27Using the Remote Control ................... 27

Using the Side-Key Controls ............... 27

Tuning the Television ................28

Quick Setup ......................................... 28

Setting the Channels .................30

Auto Tuning ......................................... 30Manual Tuning ..................................... 31

Automatic Power Down ....................... 33

Reset TV ............................................. 33

DTV Settings ..............................34

Channels ............................................. 34

Channel Options.................................. 35

Subtitle and Audio ............................... 36Password............................................. 36

Parental ............................................... 36

Common Interface ............................... 36

General Controls .......................37

Selecting Channels ............................. 37

Stereo and Bilingual

Transmissions ..................................... 37

Quick Access Menu ............................. 37

Subtitles............................................... 37

Picture Still .......................................... 37

Input Selection..................................... 37

Sound Controls..........................38

Volume Controls and Mute Sound....... 38

Dual ..................................................... 38

Bass, Treble and Balance ................... 38

Stable Sound ....................................... 38


3/64

3

English

Surround Sound .................................. 38

Bass Boost .......................................... 38

SPDIF Type ......................................... 38

Audio Description ................................ 39

Widescreen viewing ..................40Available Picture Size and Position

Control ................................................. 41

Picture Controls.........................42

Picture Position ................................... 42

Picture Mode ....................................... 42

Picture Preferences ............................. 42

Black/White Level ................................ 43

Cinema Mode ...................................... 43

Colour Temperature ............................. 43

Static Gamma...................................... 43

Reset ................................................... 43

Active Backlight ................................... 43

3D Colour Management ...................... 43

Base Colour Adjustment ...................... 44

Digital Noise Reduction ....................... 44

MPEG NR Noise Reduction ............. 44

Enjoy Photos through USBPort .............................................45

View Photo Files .................................. 45

Using Slide Show ................................ 46

Repeat Settings for Slideshow ............ 46

Set Interval Time ................................. 46

Using the Play List............................... 46

Photo Info ............................................ 46

Enjoy Music through USBPort .............................................47

Play Music Files .................................. 47

Repeat Settings ................................... 48Using the Play List............................... 48

Music Info ............................................ 48

Enjoy Videos through USBPort .............................................49

Play Video Files ................................... 50

Repeat Settings ................................... 51

Set ...................................................... 51Slow Forward ...................................... 51

Step Forward ....................................... 51

Using the Play List............................... 51

Video Info ............................................ 51

Goto Time ............................................ 51

HDMI-LINK Controls ..................52

Equipment Control............................... 52Input Source Selection ........................ 52

HDMI-LINK Menus .....................53

One Touch Play ................................... 53

System Standby .................................. 53

System Audio Control .......................... 53

Enable HDMI-LINK .............................. 53

Auto Power On .................................... 53

Auto Standby ....................................... 54

Amplier Control.................................. 54

Speaker Preference ............................ 54

Preference Controls ..................55

On Timer.............................................. 55

Sleep Timer ......................................... 55

EPG ..................................................... 56

Panel Lock........................................... 57

Auto Format (Widescreen) .................. 57

4:3 Stretch ........................................... 57

Blue Screen ......................................... 57

Side Panel ........................................... 57

System Information ............................. 57

System Upgrade.................................. 58

Text Services and TextInformation .................................59


4/64

4

Setting the Modes ............................... 59

Navigating Pages using Auto .............. 59

Navigating Pages using LIST .............. 59

Control Buttons.................................... 59

PC Settings ................................60Horizontal and Vertical Position........... 60

Horizontal Width .................................. 60

Clock Phase ........................................ 60

Reset ................................................... 60

Input Selection and AVConnections ...............................61

HDMI1 Audio ....................................... 61

Lip Sync Mode .................................... 61

Input Signal Selection.......................... 61

Specifcations andAccessories ...............................62


5/64

5

English

Safety PrecautionsThis equipment has been designed and manufactured to meet international safety standards but, likeany electrical equipment, care must be taken to obtain the best results and for safety to be assured.Please read the points below for your own safety. They are of a general nature, intended to help with allelectronic consumer products and some points may not apply to the goods you have just purchased.

The Class I apparatus shall be connected to a mains socket outlet with a protective earthingconnection.

Air CirculationLeave more than 10cm clearance around thetelevision to allow adequate ventilation. Thiswill prevent overheating and possible damageto the television. Dusty places should also beavoided.

Heat DamageDamage may occur if the television is left in

direct sunlight or near a heater. Avoid placessubject to extremely high temperatures orhumidity. Place in a location where the tem-perature remains between 5C (41F) min. and35C (94F) max.

Mains SupplyThe mains supply required for this equipmentis 220-240v AC 50/60Hz. Never connect to aDC supply or any other power source. DO en-sure that the television is not standing on themains lead. Use only the supplied lead.

DO NOT cut off the mains plug from thisequipment, this incorporates a special RadioInterference Filter, the removal of which willimpair its performance. In the UK, the fusetted in this plug is approved by ASTA or BSIto BS1362.

It should only be replaced by a correctly ratedand approved type and the fuse cover must beretted.IF IN DOUBT PLEASE CONSULT A COMPE-TENT ELECTRICIAN.

DoDOread the operating instructions before youattempt to use the equipment.

DOensure that all electrical connections(including the mains plug, extension leads andinter-connections between pieces of equip-ment) are properly made and in accordancewith the manufacturers instructions. Switch offand withdraw the mains plug before making orchanging connections.

DOconsult your dealer if you are ever in doubt

about the installation, operation or safety ofyour equipment.

DObe careful with glass panels on equipment.

DO NOT REMOVE ANY FIXED COVERSAS THIS WILL EXPOSE DANGEROUS ANDLIVE PARTS.THE MAINS PLUG IS USED AS A DISCON-NECTING DEVICE AND THEREFORESHOULD BE READILY OPERABLE.

Do not

DO NOTobstruct the ventilation openings ofthe equipment with items such as newspapers,tablecloths, curtains, etc. Overheating will causedamage and shorten the life of the equipment.

DO NOTallow electrical equipment to beexposed to dripping or splashing or objects lledwith liquids, such as vases, to be placed on theequipment.

DO NOTplace hot objects or naked amesources, such as lighted candles or nightlightson, or close to equipment. High temperaturescan melt plastic and lead to res.

DO NOTuse makeshift stands and NEVERx legs with wood screws. To ensure completesafety, always t the manufacturers approvedstand, bracket or legs with the xings providedaccording to the instructions.

DO NOTleave equipment switched on whenit is unattended, unless it is specically statedthat it is designed for unattended operation orhas a standby mode. Switch off by withdrawingthe plug, make sure your family know how todo this. Special arrangements may need to be

made for people with disabilities.DO NOTcontinue to operate the equipment ifyou are in any doubt about it working normally,or it is damaged in any way switch off, with-draw the mains plug and consult your dealer.

WARNING excessive sound pressure from ear-phones or headphones can cause hearing loss.

ABOVE ALL NEVER let anyone, especially chil-dren, push or hit the screen, push anything intoholes, slots or any other openings in the case.

NEVER guess or take chances with electricalequipment of any kind it is better to be safethan sorry.


6/64

6

Installation and important information

Where to install

Locate the television away from direct sunlight andstrong lights, soft, indirect lighting is recommended forcomfortable viewing. Use curtains or blinds to prevent

direct sunlight falling on the screen.Place the TV set on a stable, level surface thatcan support the weight of the TV. As an additionalsafety measure you secure the TV to the levelsurface or a wall, as shown in the illustration, usingsturdy strap.

The LCD display panels are manufactured usingan extremely high level of precision technology,however sometimes some parts of the screen maybe missing picture elements or have luminousspots. This is not a sign of a malfunction.

Make sure the television is located in a positionwhere it cannot be pushed or hit by objects, aspressure will break or damage the screen. Also,please be certain that small items cannot be in-serted into slots or openings in the case.

Cleaning the screen and cabinet...

Turn off the power, and clean the screen and cabinetwith a soft, dry cloth. We recommend that you do notuse any proprietary polishes or solvents on the screenor cabinet as this may cause damage.

Sturdy tie (as short as possible)

Stand clip

Fixing strap

Fixing strap

Sturdy tie (as short as possible)

Stand clip

Fixing strap

Fixing strap

Stand style is dependent on model

When using a Wall BracketPlease use a wall bracket appropriate for the size and weight of the LCD TV.

Two people are required for installation. Never use the four screws attached to the TV. To install a wall-mount from another manufacturer, use the SPACERS (supplied).1. Unplug and remove any cables and/or other

component connectors from the rear of the TV.

2. Carefully lay the front of the unit face down on a at,cushioned surface such as a quilt or blanket.

3. Follow the instructions provided with your wall

bracket. Before proceeding, make sure the ap-propriate bracket(s) are attached to the wall and

the back of the TV as described in the instruc-

tions provided with the wall bracket.

4. Make sure to place the spacers supplied be-

tween the bracket and the back of the TV.

5. Always use the screws supplied or recom-

mended by the wall mount manufacturer.

*Screw Type for Wall Bracket:

26LED, 32CCFL, 32LED, 40CCFL: M6/10mm/20KG 42LED: M8/12mm/20KG

Spacer

(supplied)

Wall bracket

Screw

Remove four screws.

(Do not reuse these screws for

attaching a wall bracket.)

Place four spacers (supplied).

TV back panel

Spacer

(supplied)

Wall bracket

Screw

Remove four screws.

(Do not reuse these screws forattaching a wall bracket.)

Place four spacers (supplied).

TV back panel


7/64

7

English

Removing the Pedestal Stand:

1. Carefully lay the front of the unit face down on aat, cushioned surface such as a quilt or a blan-ket. Leave the stand protruding over the edge ofthe surface.

NOTE: Extreme care should always be used whenremoving the pedestal stand to avoid dam-

age to the LCD panel.

2. Remove the screws.

3. Once you have removed all ve screwsholding the pedestal stand in place, removethe pedestal stand from the TV by sliding thepedestal stand away from the TV.

Please take note

EXCLUSION CLAUSE

Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:i) re;ii) earthquake;iii) accidental damage;iv) intentional misuse of the product;v) use of the product in improper conditions;vi) loss and/or damage caused to the product while in the possession of a third party;

vii)any damage or loss caused as a result of the owners failure and/or neglect to follow the in-structions set out in the owners manual;

viii)any loss or damage caused directly as a result of misuse or malfunction of the product whenused simultaneously with associated equipment;

Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/ordamage including but not limited to the following, loss of prot, interruption of business, the loss ofrecorded data whether caused during normal operation or misuse of the product.

If stationary images generated by 4:3 broadcasts, text services, channel identication logos, computerdisplays, video games, on-screen menus, etc. are left on the television-screen for any length of time theycould become conspicuous, it is always advisable to reduce both the brightness and contrast settings.

Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of theimage at the 4:3 outlines, this is not a defect of the LCD TV and is not covered under the manufac-turers warranty. Regular use of other size modes (e.g.: Superlive) will prevent permanent retention.

NOTE: Interactive video games that involve shooting a gun type of joystick at an on-screen targetmay not work with this TV.

SYMBOL SYMBOL DEFINITION

DANGEROUS VOLTAGE: The lightening ash with arrowhead symbol within anequilateral triangle is intended to alert the user to the presence of un-insulatedDANGEROUS VOLTAGE within the products enclosure that may be of sufcientmagnitude to constitute a risk of electric shock to persons.

INSTRUCTIONS: The exclamation point within on equilateral triangle to alert theuser to the presence of important operating and maintenance (servicing) instructionin the literature accompanying the appliance.

WARNING: To prevent the spread of re, keep candles or other open ames awayfrom this product at all times.


8/64

8

Digital Switchover

How to re-tune:

As new services are broadcast it will be neces-sary to re-tune the television in order to viewthem. Auto tuning will completely retune thetelevision and can be used to update the chan-nel list.

Press MENU button on the remotecontrol unit.Select Auto tuning option.

A screen will appear warning that previ-ous digital programmes and settings willbe deleted.

You must allow the television to com-plete the search......

When the search is complete the Auto tuningscreen will display the total number of servicefound.

Note:Further detailed instructions on Auto tuningcan be found in the TV owners manual.

If you are missing channels, it may be thatthey are not available in your area, or that youraerial needs upgrading.

If you have any further questions, please

contact your equipment supplier or call DigitalUK on 08456 50 50 50 or visit www.digitaluk.co.uk

Television in the UK is going digital, bringingus all more choice and new services. Startingin late 2007 and ending in 2012, televisionservices in the UK will go completely digital, TV

region by TV region.Please see above to nd out when your areaswitches to digital.

Digital UK is the independent, non-protorganisation leading the process of digitalTV switchover in the UK. Digital UK providesimpartial information on what people need todo to prepare for the move to digital, and whenthey need to do it.

How the switchover affects your TVequipment:

Your new TV has a digital tuner built in, whichmeans it is ready to receive the Freeview sig-nal by simply plugging it into your aerial socket(check if you can get digital TV through youraerial now, or whether youll have to wait untilswitchover, at www.digitaluk.co.uk).

When the TV switchover happens in your area,there are at least two occasions when you willneed to re-tune your TV in order to continue re-ceiving your existing TV channels, and also topick up new ones, Digital UK, the body leadingthe digital TV switchover, will advise you when

you need to re-tune during the switchover.

If you choose to connect your TV to satelliteor cable with a digital box then it will not beaffected by switchover, and you wont need tore-tune.

En

glish

En

glish

Keep this important

information about

how to re-tune your

TV during theTV switchover

English

English

When does switchover happen?

*Copeland switches on October 17, 2007

The exact date youswitch depends on thetransmitter you areserved by. To checkwhen you switch,

go to Digital UKspostcode checker onwww.digitaluk.co.uk

Check your ITV newsservice or look at Teletextpage 106 to see what TVregion youre in.

Keep this important

information about

how to re-tune yourTV during the digital

TV switchover


9/64

9

English

Re-tuning: TOSHIBA 4 Steps

TOSHIBA Digital TV

* This process may affect any saved information stored on your product, including your favourites list.

Please consult your instruction manual or contact the manufacturer using the details above.

TOSHIBA Customer Helpline: 0844 856 0730 TOSHIBA Online Support:www.toshiba.co.uk/tv-dvd-support

P IC TU RE S OU NDSETUP

A P P LICA TIONS P RE FERE NCES

Press MENU and press or to select SETUP.

1 )

1

2 22 2

LanguageCountry

Tuner ModeAuto tuning

ATV Manual Tuning

DTV Manual TuningDTV Settings

AV connectionPicture Position

Quick Setup

EnglishUK

Antenna

EnterOK BackRETURN

1/2SET UP

OK

OK

OK

OK

OK

Press or to selectAuto tuning, and press

to enter the sub-menu.

2 )

1

1

2

Auto tuning

Tuning Mode

Start Scan

ATV and DTV

OK

BackRETURN

Previous settings will be lost !

Press EXIT for no change.

EnterOK

Press or to selectTuning Mode and press or to select ATV,DTV orATV and DTV.

3 )

1

1

2 2

Auto tuning

ATVDTV

StopEXIT

Progress

2 %0 %

Channel: C4 Station:

Found

00

Press or to selectStart Scan and press

to start Auto tuning.

4 )

1

1

2

(Steps 1-4)Freeview products

Make sure your TV is on and press 80for the BBC News channel

This guide can be used to help you re-tune the following product with the remote control below:


10/64

10

Manual re-tuning

If your Freeview TV or box picks up a di erent regional service to your

preferred service (e.g. BBC England instead of BBC Scotland, or ITV Central

instead of ITV Anglia), you can use this manual re-tune guide.

800 or above, this guide will help you put them in your preferred position.

retailer or installer. This is a guide only, Freeview models operate slightly

di erently. Some early models do not o er a manual re-tune facility

check your instruction book.

Go to the Postcode Checker at digitaluk.co.uk

Enter your postcode on the right hand side of the web page.

Remember to include your house number or name.

If you do not have internet access, contact the Digital UK

helpline on 08456 50 50 50 * and ask for manual re-tune

guide support.

1

Click on the How do I re-tune? pink banner.Scroll down to the manual re-tune table where

you will see the relevant RF Channel numbers

for the digital services that can be received

at your home.**

3

Once you have entered your address details, the next page gives you an indication ofwhich TV services you should receive, based on your most likely transmitter. You may

be able to receive television services from more than one transmitter and you can

check alternatives, where available.

On the results page click on the pink button to see

your full reception forecast and channel information

for switchover.

2

Write down the RF Channel numbers

for your transmitter using the Group

boxes here:4 Group 1Group 2

Group 3

Group 4

Group 5

Group 6

*Calls are free for BT customers wi thin inclusive calling plans. Call charges from other providers may vary. The standard business hours for Digital UKs contact centre are 9am to 7pm

Monday to Friday and 10am to 4pm on a Saturday. Opening hours will be extended during switchover in each area. Digital UK, PO Box 26833, Kirkcaldy,KY2 9AG .

**Please note that the Freeview channel line-up is subject to change.

Your guide to

If you are comfortable with technical information and your basic re-tune hasnt worked,

you can use this manual re-tune guide.

Please note:

Every time

you re-tune,

you will need

to go through

this process.


11/64

11

English

Language

Country

Tuner Mode

Auto tuning

ATV Manual Tuning

DTV Manual Tuning

DTV Settings

AV connection

Picture Position

Quick Setup

English

UK

Antenna

EnterOK BackRETURN

1/2SET UP

OK

OK

OK

OK

OK

DTV Manual Tuning

OK

RF Channel

Start Scan

5

Signal Strength

Quality

Weak Average Strong

Poor

BackRETURNEditInput09


12/64

12

12 In TV mode: Display on-screen informationIn Text mode: Access the index page

13 Mute the sound14 Display the QUICK access menu

15 Exit the menu system16 Display EPG17 Go to the previous level of the menu18 Display the on-screen menu19 Menu navigation: , , , :

In Text mode: Change the page Conrm the selection20 Colour button: Text control buttons

Reveal concealed textHold a wanted pageEnlarge text display size

Select a page while viewing anormal picture

1 Toggle between TV ON or Standby2 Toggle between external input sources3 Still Picture4 To display the teletext screen5 TEXT subtitle pages if available6 Stereo/Bilingual transmissions7 Number buttons8 Audio Description

9 Switch between ATV and DTV10 Change the volume11 Change the channel

The Remote Control

Simple at-a-glance reference of your remotecontrol.

Inserting batteries and

effective range of the remote

Do not combine a used, old battery with a newone or mix battery types. Remove dead batteriesimmediately to prevent acid from leaking intothe battery compartment. Dispose of them in

accordance with instructions on page 64 of thismanual. Warning: batteries must not be exposedto excessive heat such as sunlight or re.

The performance of the remote control willdeteriorate beyond a distance of ve metres oroutside an angle of 30 degrees from the centreof the television. If the operating range becomesreduced the batteries may need replacing.

Remove the backcover to reveal thebattery compartmentand make sure thebatteries are insertedthe right way round.Suitable battery typesfor this remote are

AAA, 1.5V.


13/64

13

English

Connecting External EquipmentBefore connecting any external equipment, turn off all main power switches. If there is no switchremove the mains plug from the wall socket.Connect the power cord into the AC-IN socket found at the back of the TV.

HDMI 1 INPUT

SOCKET

RGB/ PC

ACIN

HDMI 2 INPUT

SOCKET

For 26/32EL83*B | 32/42HL83*B

HDMI 1 INPUT

SOCKET

RGB/ PC

HDMI 2 INPUT

SOCKET

ACIN

For 32AV83*B | 32/40LV83*B


14/64


15/64

15

English

HDMI-LINK ConnectionsThe basic functions of connected audio/video equipment can be controlled using the televisionsremote control if a HDMI-LINK compatible device is connected.

The back of your television

AV amplifier

HDMI out

Playback equipment

HDMI outHDMI in

Playback equipment

HDMI out

For 26/32EL83*B | 32/42HL83*B

The back of your television

AV amplifier

HDMI out

Playback equipment

HDMI outHDMI in

Playback equipment

HDMI out

For 32AV83*B | 32/40LV83*B


16/64

16

Connecting an HDMI or DVI device to the HDMI inputThe HDMI input on your television receives digital audio and uncompressed digital video from anHDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device.This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme mate-rial in digital form from EIA/CEA-861-Dcompliant [1] consumer electronic devices (such as a set-topbox or DVD player with HDMI or DVI output). For acceptable video signal formats, see page 22.

NOTE: Some early HDMI equipment may not work properly with your latest HDMI TV, due to the

adoption of a new standard. Supported Audio format: Linear PCM, sampling rate 32/44.1/48kHz.

To connect an HDMI device

Connect an HDMI cable (type A connector) from the device to the HDMI terminal.For proper operation, it is recommended that you use an HDMI cable with the HDMI Logo( ). If your HDMI connection is capable of 1080p and/or your television is capable of refresh rates

greater than 50Hz, you will need a Category 2 cable. Conventional HDMI/DVI cable may not work

properly with this mode. HDMI cable transfers both video and audio. Separate analogue audio cables are not required

(see illustration).

HDMI

cableHDMI device

HDMI out

(not supplied)

For 26/32EL83*B | 32/42HL83*B


17/64

17

English

HDMI

cableHDMI device

HDMI out

(not supplied)

For 32AV83*B | 32/40LV83*B

To view the HDMI device video, press the button to select HDMI 1 or HDMI 2 mode.


18/64

18

To connect a DVI device

Connect an HDMI-to-DVI adapter cable (HDMI type A connector) to the HDMI 1 terminal and audiocables to the PC/HDMI1 (AUDIO) socket (see illustration). The recommended HDMI-to-DVI adapter cable length is 6.6ft (2m). An HDMI-to-DVI adapter cable transfers video only. Separate analogue audio cables are required for audio receivers.

DVI device

HDMI-to-DVI adapter cable(not supplied)

Audio cable for HDMI

to television connection

(not supplied)

For 26/32EL83*B | 32/42HL83*B


19/64

19

English

DVI device

HDMI-to-DVI adapter cable(not supplied)

Audio cable for HDMIto television connection

(not supplied)

For 32AV83*B | 32/40LV83*B

To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow theseprocedures: When turning on your electronic components, turn on the television rst, and then the HDMI or

DVI device. When turning off your electronic components, turn off the HDMI or DVI device rst, and then the

television.

[1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection,which is being standardized for reception of high-denition video signals. Because this is an evolving technology, it is possible thatsome devices may not operate properly with the television.HDMI, the HDMI Logo, and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC inthe United States and other countries.


20/64

20

Connecting a ComputerWith either an RGB/PC or an HDMI connection, you can watch your computers display on the televi-sion and hear the sound from the televisions speakers.

To connect a PC to the HDMI terminal

When connecting a PC to the HDMI terminal on the television, use an HDMI-to-DVI adapter cableand an analogue audio cable.If connecting a PC with an HDMI terminal, use an HDMI cable (type A connector). A separate ana-logue cable is not necessary.

the back of your television

HDMI-to-DVI

adapter cable

(not supplied)

2

Computer

Audio cable for PC to television

connection (not supplied)

For 26/32EL83*B | 32/42HL83*B


21/64

21

English

the back of your television

HDMI-to-DVI

adapter cable

(not supplied)

2

Computer

Audio cable for PC to television

connection (not supplied)

For 32AV83*B | 32/40LV83*B

For acceptable PC and video signal formats, see page 22.

NOTE: The edges of the images may be hidden. If connecting a certain PC model with a unique PC signal, the PC signal may not be

detected correctly.


22/64

22

Acceptable Video signals through HDMI terminals

Resolution H. Frequency (KHz) V. Frequency (Hz)

480i 15.734 60.000

480p 31.500 60.000

576i 15.625 50.000

576p 31.250 50.000

720p 37.500 50.000

720p 45.000 60.000

1080i 28.125 50.000

1080i 33.750 60.000

1080p 27.000 24.000

1080p 28.125 25.000

1080p 33.750 30.000

1080p 56.250 50.000

1080p 67.500 60.000

Acceptable PC signals through HDMI terminals

Resolution H (KHz) V(Hz)Pixel Clock(MHz)

H-Polarity V-Polarity H-Total V-Total

640 x 480 31.369 59.940 25.175 Negative Negative 800 525



800 x 600 35.160 56.250 36.000 Positive Positive 1024 625






1280 x 768 47.776 59.870 79.500 Negative Positive 1664 798





23/64

23

English

Digital On-Screen Information and Programme Guide

When viewing in digital mode, the on-screen information and programme guide provide access toprogramme details for all available channels.

On-Screen Information Icons

Icons will appear on the Information screen giv-ing details about the programmes being broad-cast. Details of these icons are listed below:

Icon Description

Service info

Service type(TV, Radio, TEXT)

Skip

Audio info

Mono

Stereo

Dual mono

Multichannel

Dolby Digital

Dolby Digital+

Audio/Subtitle info

Hearing Impaired

Event info

HD, SDVideo format

(HD, SD)

16:9, 4:3 Video Aspect

Teletext

Subtitle

(Single, Multi)

Multi-audio track

3 - 18 Parental rating

Encrypted

Timer infoRecording

Reminder

Guide

Select the on-screen guide by pressing

GUIDE. The guide screen will appearhighlighting details of the channel andprogramme currently being viewed. Thismay take a few moments to appear.

Press or for information on other pro-grammes scheduled for the channel selected.

For details of other programmes cur-rently available, press and to scrollup and down the channel list.

NOTE: In order for the recording operation

to work properly, the media recordermust be set to the same time as the TV.Regarding the process for recording,please refer to the owners manual ofthe recording equipment.

Information

Press , and the information screenwill appear giving details of the channeland programme currently being viewed.

1 BBC Parliament

Westminster Hall

Prime Minister's Questions

Recorded coverage of questions in the House of Commons to Prime

Minister Gordon Brown from Wednesday 26 Novemder.

07:00 11:30

11:30 12:00

News/Current.. 72 Minutes Left

10:18 Sun, 30 Nov

Press or to choose from Now orNext information guide.


24/64

24

Frequently Asked Questions

Q Why is there no sound or picture?

A Check that the television is on and thatall connections are made properly.

Q There is a picture, but why is there littleor no colour?

A

The colour is factory set to Auto to auto-matically display the best colour system.When using an external source, if thereis little or no colour, improvements maysometimes be achieved.

To manually change the colour system:

With the external source playing, select

Manual setting in the SETUP menu.Using or to choose from Auto,NTSC 4.43, NTSC 3.58, SECAM orPAL.

Manual setting

EXT 1

Colour system: Auto

A

BackRETURNSelect Change SaveOK

Q Why doesnt the video/DVD beingplayed show on-screen?

AMake sure the VCR or DVD player isconnected to the television, then selectthe correct input by pressing .

Q Why is there a good picture but nosound?

A

Check all cable connections and that

the volume has not been turned down orthat the sound has not been muted.

Q What else can cause a poor picture?

A

Interference or a weak signal. Try adifferent television station. Manual ne

tuning may help:

Select the ATV/DTV Manual Tuning inthe SETUP menu.Highlight the station and press , thenpress or to select Manual fne tuning.

ATV Manual Tuning

Manual fine tuning

1 BG P C 69 0


Using or to adjust to get the best pic-ture and sound. Press and then EXIT.

Q Why doesnt the remote control work?

A Check that the batteries arent dead orinserted incorrectly.

QWhy are there problems with text?

A

Good performance of text depends ona strong broadcast signal. If the text isunreadable or garbled, check the aerial,satellite or cable connection. Go to themain index page of the text service andlook for the User Guide. This will explainthe basic operation of text in some detail.

Q Why are the four coloured text numbersvisible but no text?

A

Text has been selected while viewing anexternal source. No text will appear on-screen or a box may appear stating noinformation is available. Select a broad-casting channel and press to access.


25/64

25

EnglishQ Why are the colours wrong when anNTSC source is played?

AConnect the source via a SCART cableand play. Select Manual setting fromthe SETUP menu and set the ColourSystem to Auto.

Manual setting

EXT 1

Colour system: Auto

A


Q What can be done if the user-denedpassword has been forgotten?

A Use the universal password 1276, thenchange to a new number of your choice.

Q Why dont the devices connected viaHDMI operate properly?

A

Make sure to use cables with the HDMIlogo ( ). Some early HDMIequipment may not work properly withthe latest HDMI TV products, due toadoption of new standards.

Q Why is the VCR/DVD picture in blackand white?

A Check the correct input has been chosen:S-VIDEO or AV.

Q Why did TV turn off by itself?

AAfter roughly 15 minutes without anyinput video signal at TV mode, the TVwill turn off to save power.


26/64

26

Using the ControlsWhile all the necessary adjustments and controls for the television are made using the remote control,the buttons on the television may be used for some functions.

HDMI 2 INPUT

SOCKET

Common Interface

USB

RED LED Standby

GREEN LED Power on

GREEN LED On Timer

For 26/32EL83*B | 32/42HL83*B

HDMI 2 INPUT

SOCKET

Common Interface

USB

RED LED Standby

GREEN LED Power on

GREEN LED On Timer

For 32AV83*B | 32/40LV83*B


27/64

27

English

Switching On

If the RED LED is unlit check that the plug is connected to the power supply. If the picture does notappear press on the remote control, it may take a few moments.

To put the television into Standby press on the remote control. To view the television pressagain. The picture may take a few seconds to appear.

Using the Remote Control

To set up the television you will now need to use the on screen menus. Press MENU on the remotecontrol to see the menus.

The on-screen menu appears as a list of ve topics. As each symbol is selected by pressing or on the navigation ring on the remote control, its respective options will appear right side.

To use the options, press to enter the sub menu. Then press or on the navigation ring tomove up and down through them and use or to select the required choice. Follow the on-screeninstructions. The functions of each menu are described in detail throughout the manual.

Using the Side-Key Controls

To change the volume, press .

To alter the channel, press P .

Press MENU and or , or to control the sound and picture options.

Press MENU to nish.

To select an external input, press and then use or to move through the list until the appro-priate input source is selected.

Please always refer to the owners manual of the equipment to be connected for full details.

Please note: Inserting the headphone plug will mute the sound from all speakers.


28/64

28

Before switching on the television put your decoder and media recorder to Standby if they are connected.To set up the television use the buttons on the remote control as detailed on page 12.

Tuning the Television

Quick Setup

For rst time use, plug in the televisionand press the button.The Quick Setup screen will appear.

Quick Setup

Language

Country

Digital Subtitle Language

Digital Subtitle Language 2nd

Audio Language

Audio Language 2nd

English

Germany

English

English

English

English

BackRETURNSelect Tuner ModeOK

Note: The Quick Setup menu can alsobe accessed in the SETUP menu.

Press or to select Languageand then press or to select yourlanguage (English, Franais, Deutsch,Espaol, Italiano, Portugus, Neder-lands, Svenska, Dansk, Norsk, Suomi,Polski, Slovenina, Magyar, Slovensky,

esk, Pycc, Romn, apc,Srpski, Ev, Hrvatski, Trke or).

Press or to select Digital SubtitleLanguage and then press or toselect your preferred language.

Press or to select Digital SubtitleLanguage 2nd and then press or to select your preferred language.

Press or to select Audio Lan-

guage and then press or to selectyour preferred language.

Press or to select Audio Lan-guage 2nd and then press or toselect your preferred language.

Press or to select Country andthen press or to select yourcountry (UK, Italy, Netherlands, Sweden,Bulgaria, Greece, Russia, Norway, Ire-land, Portugal, Others, Austria, Belgium,Switzerland, Czech, Germany, Denmark,Spain, Finland, France, Polannd, Turkey,Hungary, Slovenia, Ukraine, Slovakia,Luxembourg or Romania).

Press to select Tuner Mode.

NOTE:This option is country specic inthe Quick Setup menu

Tuner Mode

BackRETURNSelect LocationOK

Antenna

Press or to select Antenna orCable.

Press to select Location.

NOTE: The Location can also beaccessed in the SETUP menu.

Location

Store

To use the TV for the display in a store showroom,

please select [Store].

[Home] mode is recommended for normal use.

BackRETURNSelect Auto tuningOK

Press or to select Home orStore.


29/64

29

English

When Store is selected, the conrmationwindow appears.

Location

No

BackRETURNSelect Auto tuningOK

You have selected [Store].

This mode consumes more energy.

Are you sure you want to set to this mode?

Press or to selectYes orNo.

Press to enter the Auto tuning menu.

NOTE: Please make sure the aerial is con-nected to the TV before tuning.

Auto tuning

Tuning Mode

Start Scan

ATV and DTV

OK

BackRETURN



EnterOK

Press or to select Tuning Mode

and then press or to select ATV,DTV orATV and DTV.Press or to select Start Scan andpress .

Auto tuning

ATV

DTV

StopEXIT

Progress

1 %

0 %


Found

0

0

The search will begin for all available stations.The slide bar will move along the line as thesearch progresses.

You must allow the television to completethe search.

When the search is complete the television willautomatically select channel 1. This may not bea clear picture or the signal may be weak, sothe station order can be changed using

ATV/DTV Manual Tuning in the SETUP menu.

NOTE: The time will be set automatically bytransmission but can be advanced ordecreased by using Local Time Settingin the DTV Settings screen.


30/64

30

Setting the ChannelsNote: When Parental Block is activated, the 4-digit password is needed.

Auto Tuning

The Auto tuning function will completely re-tune the television and can be used to updatethe channel list.

NOTE: It is recommended that Auto tuning isrun periodically to ensure that all newservices are added.

NOTE: All the current channels and settings,for example, the locked channels, willbe lost.

Tuner Mode - Antenna

Press MENU. Press or to selectSETUP and press to enter the sub-menu..

PICTURE SOUNDSETUP

A P PLICA TIONS P R EFE RE N CE S

Press or to select Auto tuning, andpress to enter the submenu.

EnterOK BackRETURN

1/2SETUP

Language

Country

Tuner Mode

Auto tuning

ATV Manual Tuning

DTV Manual Tuning

DTV Settings

AV connection

Picture Position

Quick Setup

English

Germany

Antenna

OK

OK

OK

OK

OK

Press or to select Tuning Modeand press or to select ATV, DTV orATV and DTV.

Auto tuning

Tuning Mode

Start Scan

ATV and DTV

OK

BackRETURN



EnterOK

Press or to select Start Scan andpress to start Auto Tuning.

Auto tuning

ATV

DTV

StopEXIT

Progress

2 %

0 %


Found

0

0

Tuner Mode - Cable

Switching between tuner modes will change thefeatures avaliable on your television.

All the current channels and settings, for exam-ple, the locked channels, will be lost.

In the SETUP menu, press or to selectTuner Mode and press .Press or to selectYes orNo.

Tuner Mode

No

This may change the features available on your

TV. Continue?

BackRETURNEdit Enter OK


Press or to select Auto tuning, and

press to enter the submenu.

EnterOK BackRETURN

1/2SETUP

Language

Country

Tuner Mode

Auto tuning

ATV Manual Tuning

DTV Manual Tuning

DTV Settings

AV connection

Picture Position

Quick Setup

English

Germany

Cable

OK

OK

OK

OK

OK


31/64

31

English

Press or to select Tuning Modeand press or to select ATV, DTV orATV and DTV.

Auto tuning

Tuning Mode

Start Scan

Scan type

Start Frequency (MHz)

End Frequency

Modulation

Symbol Rate

Network ID

ATV and DTV

Quick Scan

113.000 MHz

Auto

Auto

Auto

Auto

OK

Previous settings will be lost! Press EXIT for

no change.

BackRETURNEdit

Press or to select Operator Selec-tion, and press or to select Others, Ziggo orUPC.

NOTE:Operator Selection can onlybe adjusted when Country isNetherlands.

Press or to select Scan type, andpress or to select Full Scan orQuick Scan.

NOTE: Channels with aweak signal may

be missed by Quick Scan.Press or to select OperatoStartFrequency, End Frequency, Modula-tion, Symbol Rate orNetwork ID, anduse number key pad on the remote todene the information or select Auto fortuning.

Press or to select Start Scan andpress to start tuning.

NOTE:

The information should begiven by your cable provider.

NetworkID is only availableforQuick Scan.

Manual Tuning

There are two TV modes: ATV and DTV thatcan be tuned-in manually using Manual Tun-ing.

ATV mode - Antenna/Cable


Press or to select ATVManual Tun-ing and press to enter the submenu.

EnterOK BackRETURN

1/2SETUP

Language

Country

Tuner Mode

Auto tuning

ATV Manual Tuning

DTV Manual TuningDTV Settings

AV connection

Picture Position

Quick Setup

English

Germany

Antenna

OK

OK

OK

OK

OK

Pressp orq to select the programmeposition you want to arrange and thenpress .

ATV Manual Tuning

Position

1

2

3

4

5

6

Channel

C1

C2

C3

C4

C5

C6

Station

BackRETURNSort Enter OK

Pressp orq to move through the list toyour preferred position. As you do so theother stations will move to make room.

Press t to store programme position.

ATV Manual Tuning

Position

1

2

3

4

5

6

Channel

C2

C1

C3

C4

C5

C6

Station

BackRETURNStore


32/64

32

DTV mode - Antenna


Press or to select DTVManual Tun-ing and press to enter the submenu.

EnterOK BackRETURN

1/2SETUP

Language

Country

Tuner Mode

Auto tuning

ATV Manual Tuning

DTV Manual Tuning

DTV Settings

AV connection

Picture Position

Quick Setup

English

Germany

Antenna

OK

OK

OK

OK

OK

Press or to select RF Channel andpress or to select or use numberkey pad on the remote to enter a channel.

DTV Manual Tuning

OK

RF Channel

Start Scan

5

Signal Strength

Quality

Weak Average Strong

Poor



Press to display the breakdownmenu. Press t oru to select an item,then pressp orq to select the item asshown below.

ATV Manual Tuning

Manual fine tuning

1 BG P C 69 0


A B C D E F G H I

A Position:The number to be pressed on the remotecontrol.

B System:Specic to certain areas.

C Colour system:Factory set to Auto, should only bechanged if problems are experienced,i.e. NTSC input from external source.

D Skip:Means nothing has been stored or

the facility to skip the channel is On.

E Signal Class:The channel classication.

F Channel:The channel number on which a stationis being broadcast.

G Searching:Search up and down for a signal.

H Manual fne tuning:Turn on to execute ne tune function.Turn off to execute manual ne tune

funftion.

I Station:Station identication. Use thep orqand or buttons to enter up to sevencharacters.

Press to save.


33/64

33

English

DTV mode - Cable


Press or to select DTVManual Tun-ing and press to enter the submenu.

EnterOK BackRETURN

1/2SETUP

Language

Country

Tuner Mode

Auto tuning

ATV Manual Tuning

DTV Manual Tuning

DTV Settings

AV connection

Picture Position

Quick Setup

English

Germany

Cable

OK

OK

OK

OK

OK

Press or to select Frequency,Modulation orSymbol Rate ,and usenumber key pad on the remote to denethe information or select Auto for tuning.

DTV Manual Tuning

OK

Frequency

Modulation

Symbol Rate

Start Scan

113.000 MHz

QAM 16

4000 KS/s

Signal Strength

Quality

Weak Average Strong

Poor



Automatic Power Down

The TV will automatically turn itself off (standby)within 4 hours, if you do not touch the controlbuttons on the remote control or on the TVcontrol panel. It will also automatically turn off ifno input signal is detected after approximately

15 minutes.

In the SETUP menu, press or toselect Automatic Power Down.

Press or to select On orOff.

BackRETURN

2/2SETUP

OK

OK

OK

Edit

Automatic Power Down

Location

Software Upgrade

System Information

Reset TV

Off

Home

Reset TV

Selecting Reset TV will reset all TV settings totheir original factory values.

In the SETUP menu, press or toselect Reset TV and press .

Press or to selectYes to conrm orselect No to exit and press .

Reset TV

No



BackRETURNSelect Enter OK


34/64

34

DTV Settings

Channels

The channel order may be changed to suit yourpersonal preference.

NOTE: This function is only available in DTVmode.

Press MENU. Press or to selectSETUP and press to enter the sub-menu.

PICTURE SOUNDSETUP


Press or to select DTVSettings andpress to enter the submenu.

Press or to select Channels andpress .

DTV Settings

Channels

Channel Options

Subtitle And Audio

Password

Parental

Local Time Setting

Common Interface

BackRETURN

OK

OK

OK

OK

OK

OK

SelectOK

Press or to select Channels.

Channels TV

BackRETURNRe nu mbe r S ki p

Position

803

804

805

806

807

273

Name

Rossia 1

Rossia 24

NTV

TRK 5 kamal

Bibigon

Service Information Radio Three

SortOK

Re-number

Press the button on the remote torenumber the highlighted channel.

Edit the channel number using the numberkeys on the remote and press .

Channels TV

BackRETURN

Position

804

805

806807

273

Name

Rossia 1

Rossia 24

NTV

TRK 5 kamalBibigon


EnterOK

8

Input09

Skip

Press the button on the remote. Aicon appears.

Channels TV

BackRETURNRenum be r S ki p

Position

803

804

805

806

807

273

Name

Rossia 1

Rossia 24

NTV

TRK 5 kamal

Bibigon


SortOK


35/64

35

English

Press or to highlight the skip

( ) box.

Channel Options


TV

CH

800

Name

DEEJAY TV

Press to select. A tick appears in thebox.

NOTE: Skipped channels cannot be selectedby P orP but still be accessed bydirect entry (when tuned a icon willbe displayed in the banner to indicateas a skipped channel).

Parental Control

Locking channels stops the viewing of digitalchannels, and they can only be accessed byentering the password.

In the DTV Settings menu, press or to select Channel Options, and press

to enter submenu.

Press or to highlight the lock

( ) box.

Press to select. A tick appears in thebox.

If the password has already been set,password entry will be required to set thelocked channels.

Channel Options


TV

CH

800

Name

DEEJAY TV

From this point on, when any of thechannels in the Channel Options listare selected, the password must beentered before they can be accessed.

Sort

Pressp orq to select the desiredchannel and then press . A tick iconappears.

Channels TV

BackRETURNStoreOK

Position803

804

805

806

807

273

NameRossia 1

Rossia 24

NTV

TRK 5 kamal

Bibigon


Pressp orq to select the channel youwish to swap with the one selected in Step

8and then press .The positions of the two channels areswapped.

Channels TV

BackRETURNStoreOK

Position

804

803

805

806

807

273

Name

Rossia 24

Rossia 1

NTV

TRK 5 kamal

Bibigon


Channel Options

This function is to setup the Skip or Lock forcurrently watched channel.

Skip Channels

The feature allows you to set channel that will

be skipped when P orP are used totune.

In the DTV Settings menu, press or to select Channel Options, and press

to enter the submenu.

DTV Settings

Channels

Channel Options

Subtitle And Audio

Password

Parental

Local Time SettingCommon Interface

BackRETURN

OK

OK

OK

OK

OK

OK

SelectOK


36/64

36

Subtitle and Audio

You can choose the Subtitle Type or AudioType from Normal orHearing Impaired. Ifthe Hearing Impaired is selected, it providessubtitle services to deaf and hard of hearingviewers with additional descriptions.

Subtitle Language orAudio Language allowa programme or lm to be viewed with a choiceof soundtrack language, provided they are cur-rently being broadcast.

In the DTV Settings menu, press or to select Subtitle And Audio, andpress to enter the submenu.

Press or to select Subtitle Type orAudio Type and press or to selectNormal orHearing Impaired.

Press or to select Digital SubtitleLanguage, Digital Subtitle Language2nd, Audio Language orAudio Lan-guage 2nd and press or to selectyour preferred language.

Password

Change the 4-digit parental control password.

The factory default password is 0000.

In the DTV Settings menu, press or to select Password, and press toenter the submenu.

DTV Settings

Channels

Channel Options

Subtitle And Audio

Password

Parental

Local Time Setting

Common Interface

BackRETURN

OK

OK

OK

OK

OK

OK

SelectOK

Enter a new 4-digit password, andre-enter the new password again toconrm.

Password

New Password

Confirm Password

Parental

This function blocks channels or programmesthat you do not want to or that you do not wantyour children to watch.

A password is required to access this function.

The factory default password is 0000.NOTE: When Parental Control is activated, you

will need to enter the 4-digit passwordbefore you enter the DTV Settingssubmenu under the SETUP menu. Afterauto tuning, all the channel blocks will becleared.

In the DTV Settings menu, press or to select Parental, and press toenter the submenu.

Enter the 4-digit password.

Press or to set the age rating fromage 4~18 or select None to turn this func-tion off orBlock All.

NOTE: This function is available for pro-grammes with Age Rating information.

Common Interface

The Common Interface Slot, situated on the

side of the television, enables the insertion ofa CAM (Conditional Access Module) and card.These are purchased from a service providerand allow additional subscription broadcaststo be viewed. For information, see a serviceprovider.

Insert the CAM and card into the CommonInterface Slot, following the instructionsprovided with the CAM. A box will appearon the screen to conrm that the CAM hasbeen inserted.

In the DTV Settings menu, press or to select Common Interface, andpress to enter the submenu.

Details of the CAM should now be avail-able.

NOTE: The software updating of CI Plus CAMmay be automatically executed. At thistime, any Recording/Reminder pro-gramme timer will be canceled.


37/64

37

English

Selecting Channels

To select a channel use the numbered buttonson the remote control.Channels can also be selected using P andP .

Stereo and BilingualTransmissions

If stereo or dual language broadcasts aretransmitted the word Stereo or Dual will ap-

pear on the screen each time channels arechanged, disappearing after a few seconds. Ifthe broadcast is not in stereo the word Monowill appear.

Stereo: Press to select Stereo orMono.

Bilingual: If a bilingual programme is offered,the word Dual will display on screen. Tochange between languages, press toswitch between Dual 1 and Dual 2.

Quick Access MenuQuick access helps you access some optionsquickly such as Picture Size, Picture Mode,Sleep Timerand System Information. Pressthe QUICK button to display the Quickaccess menu and use or to select theoption you would like to change.

Quick access

Picture Size

Picture Mode

Sleep Timer

System Information

Normal

Standard

00:00OK

NOTE:Quick access items are differentdepending on the current mode.

Subtitles

If Subtitles are available for your current pro-gramme, pressing the SUBTITLE button willtoggle Subtitles on or off.

Picture Still

This feature is used to hold a still image onthe screen. Press to hold an image on thescreen, press again to cancel.

Input Selection

Use the Input Selection feature if the televi-sion does not switch over automatically whenusing an external device.

Pressing , a list will appear on-screen show-ing all external equipment.Use or to highlight and to select.

TV

1

2

3C

HDMI1

HDMI2

MEDIA

PC

Inputs

HDMI displays equipment connected to Input

HDMI on the back of the television. It is de-signed for best performance with 1080i/1080phigh denition signals.

General Controls

The General Controls will allow you to select channels and information, use the sound controls, per-sonalise the picture style, and select external equipment.


38/64

38

Sound Controls

Volume Controls and Mute Sound

Volume

Press or to adjust the volume.

Sound Mute

Press on the remote once to turn the soundoff and again to cancel.

Dual

If a programme or lm is being broadcast witha soundtrack in more than one language, theDUAL feature allows selection between them.

Press MENU. Press or to selectSOUND and press to enter thesubmenu..

PICTURESOUND

S ET UP A PP LI CAT IO NS P RE FE RE NC ES

Press or to select Dual, and press or to choose between Dual1 orDual2.

SOUND

OK

Dual

Bass

Treble

Balance

Stable Sound

Surround Sound

Bass Boost

SPDIF Type

Audio Description

Dual1

0

0

0

Off

Off

On

PCM

BackRETURNEnterOK

Bass, Treble and Balance

The sound controls are accessible in digitaland analogue modes.


Press or to select Bass, Treble orBalance and press or to change thesetting.

Stable Sound

The Stable Sound feature limits high volumelevels in order to prevent the extreme changes

in volume that can occur when channelsare changed or a programme switches to acommercial.


Press or to select Stable Sound,and press or to select On orOff.

Surround Sound

Surround Sound enhances depth of thesound.


Press or to select Surround Sound,and press or to select On orOff.

Bass Boost

Bass Boost enhances depth of the sound.


Press or to select Bass Boost, andpress or to select On orOff.

SPDIF Type

The feature allows you to select a digital audioformat.

Press MENU and press or to selectSOUND.

Press or to select SPDIF Type, andpress or to select PCM orAuto.


39/64

39

English

Audio Description

Audio Description is an additional narrationdescribing on-screen action, body language, ex-pressions and movements for people with visualdisabilities while watching the TV. This functionenables you to choose the type of narrations.


Press or to select Audio Descrip-tion and press to enter the submenu.

Press or to select Audio Descrip-tion, and press or to select On orOff.

Audio Description

Audio Description

Mixing Level

On

20

Edit BackRETURN

Press or to select Mixing Level, andpress or to change the setting.

Note:Mixing Level can only be ad-justed when Audio Descriptionis On.

NOTE: Press the AD button on theremote control to switch the AudioDescriptionOn orOff.


40/64

40

Subtitle

Widescreen viewing

Depending on the type of broadcast being transmitted, programmes can be viewed in a number offormats.

Wide

Use this setting when watching awidescreen DVD, widescreen video tape

or a 16:9 broadcast (when available). Dueto the range of widescreen formats (16:9,14:9, 20:9 etc.) black bars may be visible

on the top and bottom of the screen.

4:3Use this setting to view a true 4:3

broadcast.

Super Live

This setting will enlarge a 4:3 image tot the screen by stretching the image

horizontally and vertically, holding betterproportions at the centre of the image.

Some distortion may occur.

Cinema

When watching letterbox format lms/video tapes, this setting will eliminate or

reduce the black bars at the top and bottomof the screen by zooming in and selecting

the image without distortion.

Subtitle

When subtitles are included on a letterbox

format broadcast, this setting will raisethe picture to ensure that all the text is

displayed.

14:9Use this setting when watching a 14:9

broadcast.

Native

When using a PC connected via HDMI thissetting will show the picture without over

scan, i.e. WYSIWYG.This option is only available when

watching video signal source via HDMI.

Press QUICK to display the Quickaccessmenu. Use or to select the Picture Size,and press or to select the option.

Quick access

Picture Size

Picture Mode

Sleep Timer

System Information

Normal

Standard

00:00OK

You can choose the picture size from Wide, 4:3, Super Live, Cinema, Subtitle, 14:9, Native or Normal.

Using the special functions to change the size of the displayed image (i.e. changing the height/width

ratio) for the purposes of public display or commercial gain may infringe on copyright laws.


41/64

41

English

Available Picture Size and Position Control

Wide 4:3SuperLive

Cinema Subtitle 14:9 Native NormalDot by

Dot

ATV o o o o o o x x x

DTVSD o o o o o o x x x

HD o o o o x o o x x

Scart o o o o o o x x x

CVBS o o o o o o x x x

YPbPrSD o o o o o o x x x

HD o o o o x x x x x

HDMISD o o o o o o o x x

HD o o o o x x o x x

D-SUB o x x x x x x o o

DVI o x x x x x x o o


42/64

42

Picture Position

The Picture Position may now be adjusted to suitpersonal preference.


PICTURE SOUNDSETUP


Press or to select Picture Positionand press to enter the submenu.

EnterOK BackRETURN

1/2SETUP

Language

Country

Tuner Mode

Auto tuning

ATV Manual Tuning

DTV Manual Tuning

DTV Settings

AV connection

Picture Position

Quick Setup

English

Germany

Antenna

OK

OK

OK

OK

OK

Press or to select an option youwant to adjust, and press or toadjust the settings as required.

Picture Position

Horizontal position

Vertical position

Reset

0

0

Edit BackRETURN

OK

Picture Mode

You can adjust the picture appearance by se-lecting the preset value in picture mode basedon the programme category.

Press MENU. Press or to selectPICTURE and press to enter thesubmenu..

PICTURESOUND SET UP APPLICATIONS PREF ERENCES

Press or to select Picture Settingsand press to enter the submenu.

Picture Settings

OK

Picture Mode

Back Light

Contrast

Brightness

Colour

Tint

Sharpness

Black/White Level

Cinema Mode

Colour Temperature

Static Gamma

Reset

Standard

70

95

50

50

0

50

Middle

On

Medium

+4

Edit BackRETURN

Press or to select Picture Mode andpress or to select Dynamic, Stand-ard, Mild, Movie, Game orUser.

Note:Game is not available for the TVinput mode.

Picture Preferences

You can customise current picture modesettings while selecting User.

In the Picture Settings menu, press or to select Back Light, Contrast,Brightness, Colour, Tint, Sharpness.

Press or to suit your preference.

Picture Controls

Most of the picture controls and functions are available in both digital and analogue modes.

Note: Features not available will be greyed out.


43/64

43

English

Black/White Level

This function increases the strength of darkareas of the picture, which improves picturedenition.

In the Picture Settings menu, press or to select Black/White Level.

Press or to adjust the level fromOff, Low, Middle to High. The effectdepends on the broadcast and is mostnoticeable on dark colours.

Cinema Mode

A movie lms picture runs at 24 frames a second,whereas movie software such as DVD, etc., thatyou enjoy watching on television at home runs

at 30 (NTSC) or 25 (PAL) frames a second. Toconvert this signal to reproduce a smooth motionand picture quality, select the Cinema mode.

In the Picture Settings menu, press or to select Cinema Mode.


Colour Temperature

Colour Temperature increases the warmth orcoolness of a picture by increasing the red orblue tint.

In the Picture Settings menu, press or to select Colour Temperature.

Press or to select Colour Tem-perature and press or to selectMedium, Cool orWarm to suit yourpreference.

Colour Temperature

Colour Temperature

Red Level

Blue Level

Green Level

Medium

0

0

0

Press or to select Red Level, BlueLevel orGreen Level and press or to adjust the settings as required.

Static Gamma

The static gamma feature allows you to adjustthe levels of black in the picture.

In the Picture Settings menu, press or to select Static Gamma.

Press or to select the number ofStatic Gamma (-5~+5).

Reset

This feature resets all picture settings to thefactory settings.

In the Picture Settings menu, press or to select Reset and press to reset settings.

NOTE: If any picture settings have not beenchanged, Reset is not available.

Active Backlight

When Active BacklightControl is activated,it will automatically optimise the backlightinglevels for dark scenes.

Press MENU. Press or to selectPICTURE and press to enter thesubmenu..

Press or to select Active BacklightControl.


3D Colour Management

When 3D Colour management is set to On itallows the Base colour adjustment feature tobecome available.You can adjust the picture colour quality by

selecting from 6 base colour adjustments :Red, Green, Blue, Yellow, Magenta orCyan.

In the PICTURE menu, press or toselect 3D Colour Management.


NOTE: When a DVD movie with subtitle isplaying back, this mode may not workcorrectly.


44/64

44

Base Colour Adjustment

The Base Colour adjustment feature allowsthe adjustment of individual colours to suit per-sonal preference. This can be useful when usingan external source. It only can be adjusted when3D Colour management is set to On.

In the PICTURE menu, press or toselect Base Colour Adjustment andpress to enter the submenu.

Press or to select an item you wantto adjust and press .


BrightnessHue Saturation

Red

Green

Blue

Yellow

Magenta

Cyan

Reset

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0OK

EditOK BackRETURN

Press or to select Hue, SaturationorBrightness.


BrightnessHue Saturation

0Red

Press or to adjust the settings asrequired.

NOTE: In the PC Input mode, this function isnot available.

Digital Noise Reduction

DNR (Digital Noise Reduction) enables youto soften the screen representation of a weaksignal to reduce the noise effect.

In the PICTURE menu, press or toselect DNR.

Press or to select Off, Low, Mid-dle orHigh.

NOTE: This function is not available for HDMI

input.

MPEG NR Noise Reduction

When watching a DVD, the compression maycause some words or picture elements tobecome distorted or pixelated.Using the MPEG NR feature reduces this ef-fect by smoothing out the edges.

In the PICTURE menu, press or toselect MPEG NR.

Press or to select Off, Low, Mid-dle orHigh.


45/64

45

English

View Photo Files

Insert a USB storage device and presson the remote.

Use or to select MEDIA and press.

TV

1

2

3C

HDMI1

HDMI2

MEDIA

PC

Inputs

Enjoy Photos through USB PortThe Photo Viewer allows you to playback image les from a USB storage device.

Image PhotoResolution

(Mstat suggest)

Required DRAM size

(Mbytes)Remark

JPEGBase-line

15360x8704

(1920x8x1088x8)3.96 Depends on RAM size

Progressive 1024x768 6.00

PNGnon-interface 9600x6400 3.66

interface 1200x800 3.66

BMP 9600x6400 3.66

NOTE:

Resolution is a reference design, limited only by DRAM (Dynamic Random Access Memory)

size and performance

The larger the resolution, the more memory required

The smaller the resolution, the less performance required (decrease the time required todisplay a picture)

A JPEG decoder is a hardware decoder, with a max resolution of 15360 x 8704

A PNG/BMP decoder is a software decoder (running on a co-processor), with a max resolu-tion that depends on DRAM size

Press or to select PHOTO andpress to enter the submenu.

USB 2.0

PHOTO MUSIC MOVIE

MOVE SelectOK EXITEXIT

Press , , or to select the folderyou wish to view and press to enter.

Press P orP to page up or down.

MOVE SelectOK

USB:\

Return

PageP

1 \ 1

EXITEXIT


46/64


47/64

47

English

Enjoy Music through USB Port

The MP3 Player allows you to playback music les from a USB storage device.

Audio Codec File Extension Bit Rate Remark

MPEG1 Layer2 MP332Kbps~ 448Kbps(Bit rate)

32KHz ~ 48KHz(Sampling rate)

MPEG1 Layer3 MP332Kbps ~ 320Kbps(Bit rate)

32KHz ~ 48KHz(Sampling rate)

Play Music Files



TV

1

2

3C

HDMI1

HDMI2

MEDIA

PC

Inputs

Press or to select MUSIC and press

to enter the submenu.

USB 2.0

PHOTO MUSIC MOVIE


Press or to select the folder you wishto play and press to enter.


MOVE SelectOK

USB:\

Return

Music

Photo

Video

PageP

1 \ 1

Music

EXITEXIT

Press or to select the desiredmusic and press to play.

USB:\Music

Return

Up Folder

001.MP3

002.wma

003.avi

Return

1 \ 1

MOVE SelectOKPageP EXITEXIT

When listening music, press or to:

/ : Play or pause the selectedmusic

: Rewind the selected music

: Fast forward the selectedmusic

: Go to the previous music

: Go to the next music

: Stop play

: Select the desired repeatinterval:

- Repeat Off

- Repeat One: Repeat the selectedmusic once

- Repeat Folder: Repeat all music

les in the selected folder

: Show play list

: Music information

and press to conrm the setting.


48/64

48

Repeat Settings

Press or to select .

Press to select Off, One orFolder.

Using the Play List

Press or to select and press .

Press or to select music and pressto play music.

Press EXIT on the remote to collapsethe list.

00001 / 00003001.MP3

00:00:02 / 00:02:42 16

Off

Play List

001.MP3

002.wma

003.avi

001.MP3

1 / 1

MOVE SelectOKPageP EXITEXIT

Music Info

Info display le status information (contentnumber, music title, Bit Rate, Artist, Sampling,Year, and size).

Press or to select and press .

00001 / 00003

001.MP3

00:00:02 / 00:02:42 16

Off

Info

001.MP3

Album:

Title:Bit Rate:

Artist:Sampling:

Year:

Size:

Music

01320K

Singer44K

2010

6366 KBytes


The information will be removed by time-out (about 15 sec) or press to exit.


49/64

49

English

Enjoy Videos through USB PortThe Video Viewer allows you to playback video les from a USB storage device.

File

ExtensionContainer Video Codec SPEC

Bit Rate(Mbit/sec)

Profle Remark

dat, mpg,mpeg

MPG,

MPEGMpeg1,2

1080P@30fps

20 Main Prole

MP4: GMCis not sup-

ported

ts, trp, tp,m2ts

MPEG2 -TSH264-TS

MPEG2 ,H.2641080P@30fps

20

H264: Main Prole and HighProle @Level 4.0

MPEG2: MP@HL

vob MPEG2 -PS MPEG21080P@30fps

20 MPEG2: MP@HL

mp4 AVI, MP4

MPEG4Xvid 1.00, Xvid 1.01,

Xvid 1.02, Xvid 1.03,

Xvid 1.10-beta1/2H.264

1080P@30fps

20

H264: Main Prole and HighProle @Level 4.0

MPEG4: Simple Prole and

Advanced Simple Prole @Level 5

mkv MKV H.264, MPEG1,2,41080P@30fps

20

H264: Main Prole and HighProle @ Level 4.0

MPEG4: Simple Prole andAdvanced Simple Prole @Level 5

aviAVI(1.0, 2.0),

DMF0,1,2

MPEG2, MPEG4Xvid 1.00, Xvid 1.01,

Xvid 1.02, Xvid 1.03,

Xvid 1.10-beta1/2H.264

1080P@30fps

20

MPEG2: MP@HL

MPEG4: Simple Prole andAdvanced Simple Prole @

Level 5

MotionJPEG

AVI JPEG640x480@ 30fps

10


50/64

50

Press MENU to change the settingswhen viewing a video.

MOVE SelectOK

00001 / 00001002.wmv

00:00:08 / 00:02:28 16

Off

Pause

Play

EXITEXIT

Press or to:

/ : Play or pause the selectedvideo

: Fast back the selected video : Fast forward the selected video

: Go to the previous video

: Go to the next video

: Stop play

: Select the desired repeatinterval:

- Repeat Off

- Repeat One: Repeat the selected

video once

- Repeat Folder: Repeat all video

les in the selected folder

: Repeat from A to B

- Set A: A-Set

Repeat and Start

- Set B: B-Set

Repeat and repeat from

A to B

: Show play list : Video information

: Slow forward the selectedvideo

: Step forward the selected video

: Allows you to input a searchtime

and press to conrm the setting

Play Video Files



TV

1

2

3C

HDMI1

HDMI2

MEDIA

PC

Inputs

Press or to select MOVIE and pressto enter the submenu.

USB 2.0

PHOTO MUSIC MOVIE


Press or to select the folder you wishto view and press to enter.


USB:\

Return

Music

Photo

VideoVideo

1 \ 1

MOVE SelectOKPageP BackRETURN

Press or to select the desired videoand press to play.


51/64

51

English

Video Info

Info display le status information (contentnumber, video title, audio track, subtitle, pro-gram, size, etc.).

Press MENU to change the settingswhen playing a video.

Press or to and press .

00001 / 0000127.avi

00:00:08 / 00:02:28 16

Off

Info.

27.avi

Resolution:AudioTrack:

Subtitle:

Program:Size:

720 x 5761 / 1

/ 0

/ 09172 KBytes

Close

MOVE Select EXITEXIT

The information will be removed by time-out (about 15 sec) or press to exit.

Goto Time

The feature allows you to view a selected timeduring the video.


Press or to select and press

Use the number key pad on the remote toenter time.

00001 / 00001

002.wmv

00:00:08 / 00:02:28 16

Off

Goto Time

Input search time:

0 0 : 0 0 : 0 0

OK


Repeat Settings


Press or to select and pressto select Off, One orFolder.

Set


Press or to select and pressto select Set A, Set B orNone.

Slow Forward

The feature changes forward speeds.Press MENU to change the settingswhen playing a video.

Press or to select and pressto select SF2X, SF4X, SF8X, SF16X orPlay.

Step Forward

The feature allows you to view a video one frame

at a time.Press MENU to change the settingswhen playing a video.

Press or to select and pressto play step by step.

Using the Play List


Press or to select and press

Press or to select a video andpress to play the video.Press EXIT on the remote to collapsethe list.

Move SelectOK

00001 / 00001

27.avi

00:00:08 / 00:02:28 16

Off

Playlist

1 / 1

27.avi

PageP EXITEXIT


52/64

52

Equipment Control

The HDMI-LINK mode on the televisionsremote control allows the control of connectedHDMI-LINK equipment being watched.

To control the HDMI-LINK input source, rstselect the equipment with HDMI-LINK inputsource selection, then switch the mode on theremote control to HDMI-LINK and press anybuttons.

The available functions are dependent on the

equipment connected. Not all the remote con-trol keys may be available. Please refer to theoperation manual for each piece of equipmentconnected.

NOTE: The television features that can be con-trolled by the connected equipment are:Standby, Volume and Sound Mute.

HDMI-LINK Controls

This feature uses CEC (Consumer Electronics Control) technology, and allows the control of ToshibaHDMI-LINK compatible equipment from the televisions remote control.

Note: Not all Toshiba products currently support HDMI-LINK.

Input Source Selection

When any equipment using CEC technologyis connected, the HDMI-LINK icon will appearin the input source list allowing selection ofindividual devices.

Press . A list will appear on screen showingmodes and all stored external equipment.

TV

12

3C

HDMI1

HDMI2

MEDIA

PC

Inputs


53/64

53

English

One Touch Play

The function ofHDMI-LINK will automaticallypower on the television that was in standbymode and switch the televisions input sourceto the port connected with the audio/videoequipment by powering-on or playing from theaudio/video equipment.

NOTE: This feature is dependent on theconnected equipment and televisionsetting.

System StandbyThis feature automatically switches the con-nected equipment into standby when thetelevision goes into standby and converselyfor the television to switch into standby whenconnected equipment goes into standby. It isselected in the HDMI-LINK setup menu.

NOTE: This feature is dependent on theconnected equipment and televisionsetting.

System Audio Control

Using the Speaker Preference feature allowsthe televisions remote control to adjust thevolume or mute the sound of the speakers con-nected to the television via an AV amplier.

Ensure that the connected AV amplier andHDMI-LINK equipment are selected in theinput source selection and that the SpeakerPreference is set to Audio Receiverin theHDMI-LINK setup menu.

NOTE: When the AV Amplier is switched on,its input source changed or the volumeadjusted, the sound will be output fromthe AV Ampliers speakers even if TVSpeakers has been selected. Turn thetelevision off then on again to outputthe sound from the TVs speakers.

The full function may not work and is depend-ent on the Amplier being used.

Enable HDMI-LINK

When the Enable HDMI-LINK is set to On, itallows the other function

Documents

Toshiba Regza 32lv833