Upload
doanthu
View
213
Download
0
Embed Size (px)
Citation preview
R E N T A L G U I D E2
UTIlITy loAdErS
Toro® dINgo®
COMPACT
T o r o® d I N g o® | C OMPAC T u T I L I T y L O AD E R S
AuGERPOWERHEADDig up to 30” holes, down to 5-6 ft depths
HeavyUtilization and Quick ROI.Your customers can be more productive,
and you can be more profitable — with
the Toro Dingo compact utility loader.
The Dingo combines powerful performance
with incredible versatility and ease of use.
Available with an array of attachments to
meet your customers needs, the Dingo can
be rented for a wide range of applications
on any given day. The Toro Dingo is sure
todeliverhighutilization,quickROI,and
unparalledled customer satisfaction.
3
TXPLATFORMAllows stand-on operation and folds up for easy walk-behind operation
ADjuSTABLEFORkSCarryfencing,pallets,fertilizerandmore
BuCkETS 34.5", 42" and 48" widths available
LEVELER Grade, finish, spread topsoil and more
TRENCHER24", 36 and 48" booms and 4", 6", 8" and 12" chain widths available
TILLERTill more than six inches deep and 40" wide on one pass
OTHERATTACHMENTSAVAILABLE:Trench Filler, Utility Blade, Bore Drive Head and Rod & Reamer Kit (sold separately), Vibratory Plow, TX Platform, Universal Swivel Auger Power Head, Cement Bowl, Stump Grinder, High-Torque Trencher, Tree Forks, Grapple Rake, Tiller,SoilCultivator,PowerBoxRake,HydraulicBreaker,AdjustableForks,Backhoe,SnowthrowerandMulti-PurposeTool.
TX 525 - 25 hp Kubota® diesel engine
•MachineWidth:34"(41"widetrack)•Weightw/outAttachment:1904lbs(2001lbswidetrack)•Lightfootprint:5.2psigroundpressure(3.4psiwidetrack)•13.8gpmauxiliaryhydraulicflow•Two-stage,heavy-duty,remoteaircleaner
AttachmentsGenuineToroDingoattachmentsarebuilttomatchthehydraulicflowandpressuresoftheDingotomaximizepowerandperformance.ClearsightlinesandchangingattachmentsontheflymaximizetheToroDingoease-of-use,customer-friendly productivity and versatility.
*The gross/net torque of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission and operating requirements, the actual engine torque on this class of mower will be significantly lower.
TX 427 - 27 hp Kohler® gas engine
•MachineWidth:34"(or41"widetrack)•Weightw/outAttachment:1882lbs(2075lbswidetrack)•LightFootprint:5.1psigroundpressure(3.6psiwidetrack)•11.4gpmauxiliaryhydraulicflow•Two-stage,heavy-duty,remoteaircleaner
HyDRAuLICBREAkERHorizontalandverticalpositions
HydraulicAttachmentEngagement(forward and reverse)
SteeringSystem (forward, reverse, turn)
Raise/Lower/Curl/Dump
1
2
3
Patented Dingo TX Control System Operates With Three Easy Controls.
R E N T A L G U I D E4
TRX Toro®
WAlk-BEHINd TrENCHErS
T o r o® | T R X WA L k - B E H I ND T R ENCH E R
DEDIcATED TRAILERTheoptionalTRXtrailermakestowingabreezeandtheweldedguides in the bed ensure correct loading, along with a sliding bar in back to pins the machine in place – easy to tow, easy to rent.
A Rental Staple. Redefined.The Toro TRX tracked trenchers redefine dedicated walk-behind
trenchers. Employing the same patented control system as the Toro
Dingo TX, these TRX trenchers set a new standard for true two-hand
ease of use — so intuitive and simple to operate, you can easily explain
the control system to your customer in a matter of minutes. Dedicated
tracks allow your customer to traverse challenging terrain quickly
and cross-trench effectively. Designed with a balanced, low center
of gravity, the TRX does not require a front trailing wheel which can
hinder turning; become stuck or pull spoils back into a trench.
Unit shown with optional Crumber Attachment
R E N T A L G U I D E 5
boRING UNITMakeeasyworkofpipeinstallation
TRXACCESSORIES
BACkFILLBLADEEasily fill in any trench
cRUmbERFor clean bottom trenches
Toro® TRX walk-behind trenchers are as easy to operate as they are to rent.
TRX•ThreeModels:TRX-1,TRX-20&TRX-26•TX-stylecontrolsystem•kawasaki®V-Twinengines •34"widthallowseasyaccessthrough 3-footopening•10gpm(TRX-16&20)or 13.5gpm(TRX-26)@2900psi•Weight:1100–1248lbs•BoomDepthOptions:24",36"and48"•ChainWidthOptions:4",6"and8"•ChainTypes:Soil-CupTooth,Combo (RockandSoil),“Shark™”Welded RockToothand“Bullet”RockTooth
1
2
3
TRX Control System Operates With Three Easy Controls.
ChainEngagement(forward and reverse)
SteeringSystem (forward, reverse, turn)
TrencherBoomDepth (up and down)
SteeringSystem (forward, reverse, turn)
Sweep,lift/lowerandengagementofgrinderhead
1
2
STX Control System Operates With Two Easy Controls
STX Stump Grinders•TwoModelsAvailable:STX-26andSTX-38 •Fullhydraulicoperation—nobeltstoadjustorcogged pulleysandclutchestoreplace•Offsetcuttingheadprovidesexcellentvisibility•Tracksofferexceptionalsidehillstability•Transportspeedsexceeding4mph•33.5"–5"wide—easilyfitsthrough36"gates•TX-stylecontrolsystem•Trackdesignallowsforzeroturncapability•kX-730Vkawasaki®orkohler®CV980engines•Weight:1200–1800lbs•HeadSwing:47"–52"arc•Wheel:19–22.25"diametertotooth•Twelve3-positionteethforcutting
R E N T A L G U I D E6
TREE CARE Toro®
EQUIPMENT
DEDICATEDTRAILERAVAILABLEAs shown on page 4.
T o r o® | T R E E c A R E E Q U I p m E N T
Reliable Performance.Day In, Day Out.Toro® STX stump grinders are built for the daily rental grind.
The hydraulically driven head means no chance of expensive
belts breaking or slipping, and no tension adjustments.
The head also features a built-in braking system — within
3 seconds of operator releasing the joystick, the head stops.
Above all, they’re easy for your customers to use with TX-
style controls, tracks for maneuverability, and transport
speeds exceeding 4 mph for productivity.
BC-25 Brush Chipper•High-outputkohler®CommandProCH725engine•Twodouble-sidedcutterblades•Heavy-dutycentrifugalclutch•RubberTorsionsuspensionaxleforsmoothtrailering•Adjustableswing-awayjackfeaturespneumatictires •Oneboltremovalforquickaccesstobladeand wheelmechanismforcleaningandmaintenance•Trailerlightsstandardonallchippers•Width:35"•Weight:1053lbs•Throat:7"x8"•Capacity:6"diameter
LS-9 Log Splitter•Subaru®EX72engine•9"solidsteelwedge•10-gallonhydraulictank•Rubbertorsionsuspensionaxleforsmoothtrailering•Horizontalorverticaloperation•Adjustableswing-awayjackfeaturespneumatictires•Trailerlightsstandardonalllogsplitters•Width:50"•Weight:715lbs•Ratedat28ton•Stroke:24"
SHARPENINGSERVICEAVAILABLEFORCHIPPER.See Pro-Sharp on back page.
SHARPENINGSERVICEAVAILABLEFORPATENTEDQuADRuBLADE.See Pro-Sharp on back page.
R E N T A L G U I D E7
T o r o® | T R E E c A R E E Q U I p m E N T
SGR-6 and SGR-13 Handle Bar Stump Grinders•Honda®GX200orGX390engines•Well-balancedmachineequatestoless “muscling”ofmachinewhilecutting•Quadrublade™designallowseasy replacementofallteethwithinminutes•Rubbergasketsbetweencomponents resultsinlessoperatorvibration•Lifthandlesforeasyloading•Weight:110lbs/275lbs•CuttingDepth:6"/11"•Centrifugalclutch•Wheel:9.5"diametertotooth
T o r o® | T u R F R E NOVAT I ON E Qu I PM EN T
EQUIPMENT
Toro® TURFRENOVATION
R E N T A L G U I D E8
Durable and Easy to Use.Designed for landscape contractors
and DIY customers, these units are
compact and loaded with features.
Mechanicalunitshavecontrolssimilar
to a mower, so they're intuitive and easy
to use. Hydraulic units offer excellent
maneuverability. And quick fold-down
handles make the walk-behind models
easy to transport. From the unibody
frames to the high-carbon, heat-treated
spring steel blades, every product is
built tough for heavy rental use.
R E N T A L G U I D E 9
T o r o® | T u R F R E NOVAT I ON E Qu I PM EN T
18" Mechanical•Honda®GSV190engine•AeratingWidth:18"•OverallMachineWidth:28.5"•Weight:184lbs(noweights);238(withweights)•Height:25"(handlefolded)•24selfcleaningtines
18" Mechanical Seeder•HondaGX160engine•SeedingWidth:18"•OverallMachineWidth:27.5"•Weight:184lbs•Height:23"(handlefolded)•9verticuttingbladeswith2"spacing•1600cu.in.seedbox
18" Power Rake•HondaGX160engine•DethatchingWidth:18"•OverallMachineWidth:27.5"•Weight:125lbs•Height:23"(handlefolded)•22flailbladeson1.5"spacing•Bladeengagementby centrifugalclutch
21" Single Hydraulic•kawasaki®Fj180engine•AeratingWidth:21"•OverallMachineWidth:31.5"•AeratingSpeed:upto4mphfwd/2.2mphrev•Coverage:0.8acreperhour•Pullplugsupto4"deepdependingon groundconditions
30" Stand-On•kawasakiFS481V-Twinengine•AeratingWidth:28"•OverallMachineWidth:47.5"•AeratingSpeed:upto7.5mphfwd/2.2mphrev•Coverage:2.1acresperhour•Pullplugsupto5"deepdependingongroundconditions
20" Hydraulic Seeder•Honda®GXV270engine•SeedingWidth:20"•OverallMachineWidth:31.5"•GroundSpeed:3mphfwd/2.2mphrev•Weight:255lbs•40lb.seedboxcapacity
Slit Seeders & Power Rakes
Aerators
R E N T A L G U I D E10
T o r o® | C ONC R E T E & MA SONRy E Qu I PM EN T
Concrete Mixers •FiveModels:CM-658H-S, CM-958H-P,CM-958H-SED, CM-958H-PED,CM-1258y-SD•BatchCapacity:6–12cuft•BatchCapacityBags:1/2–2•HondaGX240or yanmarL100Vengines•Weight:690–897lbs
EQUIPMENT
Toro® CONCRETE& MASONRY
Electric Concrete Mixers•ThreeModels:CM-250E-PPL,CM-250E-PWB,CM-250E-PC,•ThreeConfigurations:Pedestal,Wheelbarrow,Combination•BatchCapacity:2cuft•BatchCapacityBags:1/4•1/3hpelectricmotor•Weight:113–1148lbs
From mixing to hauling to finishing, Toro’s new concrete and masonry line has you covered.
11
Concrete Vibrator•FiveModels:VIB-1,VIB-1.5,VIB-2,VIB-2.5,VIP-3•ElectricorHondaGXH50engines•Weight:12–29.5lbs
Screed•FourModels:VS-400,VS-800,VS-70,VS-80•Beamlength:4–30ft•HondaGX160orGX25engines•Weight:25–134lbs
Mortar Mixer•NineModels:MM-650E-S MM-655H-S,MM-655H-P, MM-658H-P,MM-658H-S, MM-850E,MM-858H-S, MM-858H-P,MM-12511H-S•BatchCapacity:6–12cuft•BatchCapacityBags:1–4•ElectricorHondaGX160, GX240,orGX340engines•Weight:535–1073lbs
Power Trowel•FourModels:PT-36,PT-36PP,PT-46,PT-46PP•Honda®GX160orGX240engines•Contouredadjustablehandle•Rotatingstabilizingring•Stationaryguard•Liftingeye•Shippedassembled•Weight:219–239lbs•PatentedPro-Pitch™bladeadjustmentavailable•PatentedDyna-Clutch™safetyfeature
MS-1 Masonry Saw•CutDepth:5"•1.5hpelectricmotor•14"bladecapacity•Stay-levelaluminumbladeguardwith210° ofbladecoverage•45°/90°miterguide•Castaluminumconveyorcart•Paddedbladelever•Foldinglegkitstandard•Splashguard•Weight:163lbs
MB-1600Mud Buggy•Capacity:16cuft•HondaGX390engine•TravelSpeed:upto7mph•Weight:1440lbs•Liftawayenginecover •Patentedoversized brakepedal•Handlebar-mountedspeed anddirectioncontrols
T o r o® | C ONC R E T E & MA SONRy E Qu I PM EN T
TheseTough,SensibleMachinesMeanBusiness.Frommixingtohaulingtofinishing,Toro’snewconcreteandmasonrylinehasyoucoveredwitharangeofoptionsfordifferenthardscapeapplications.TheseformerStoneConstructionEquipmentproductsarebuiltonahistoryofqualitymanufacturingandlegendarydurability.Andtheentirelineisdesignedwitheasy-to-usecontrolsandeasyaccesstomaintenancepointsforfasterservice.Italladdsuptoreliabilitythatkeepsyourcostofownershipdown.
R E N T A L G U I D E 12
Concrete Saw•TwoModels:CS-1,CS-2•CutDepth:35/8"w/12"blade,45/8"w/14" blade,55/8"w/16"blade,65/8"w/18"blade•Honda®GX340orGX390engines•CS-1:Frontcuttingguide,14"bladecapacity•CS-2:Lifteye;4"wheeledfrontcutting guide;adjustablehandles;depthgauge; 18"bladecapacitystandard(14"or16" capacityalsoavailable)•Weight:216–333lbs
R E N T A L G U I D E13
T o r o® | c o m p A c T I o N E Q U I p m E N T
COMPACTIONToro®
EQUIPMENT
Rammer•ThreeModels:VR-2650,VR-3100,VR-3500•Honda®GX100orGX120engines•ImpactForce:2650–3500lbs•Max.Productivity:3,500–3,575sqft/hr•Max.TravelSpeed:70ft./min.•PlateSize(WxL):10"x13"or11"x13"•Weight:132–154lbs
Hard-Hitting Performance.Superior performance and easy service define Toro’s new compaction line.
Designed to deliver maximum impact force without excess weight, they're
built to last with precision components for maximum durability.
TR-34 Trench Roller•CentrifugalForce:15709lbs•Hatz®2G40engine•Max.Productivity:10798sqft/hr•Max.TravelSpeed:68ft./min.(lowwithvib); 136ft/min(highwithoutvib)•TotalForceApplied:18809lbs•VibrationFrequency:2000vpm•Weight:3100lbs•Radio-frequencyremotecontrolworksup to100feet
Forward Plate•ThreeModels:FP-2200,FP-3000,FP-4000•EccentricForce:2200–4000lbs•HondaGX120orGX160engines•Removablewatertankandrollcage•MaxProductivity:6,500-10,000sqft/hr•MaxTravelSpeed:100ft/min•PlateSize(WxL):13"x21"or20"x24"•VibrationFrequency:6100–5200vpm•WaterTankCapacity:7.5–13qt•Weight:140–215lbs
Reversible Plate•Fivemodelsavailable•CentrifugalForce:4,945–14,164lbs•Superiorcompactionpowerinanydirection•Weight:264–1,014lbs
©2012 The Toro Company 490-8529
Products depicted in this literature are for demonstration purposes only. Actual products offered for sale may vary in use, design, required attachments and safety features. We reserve the right to improve our products and make changes in specifications, designs and standard equipment without notice and without incurring obligation. See your dealer for details on all of our warranties.
Toro Proudly Supports Rental BusinessesToro’s reputation for quality-built, reliable products serves the rugged demands of the rental industry well.
A Toro machine in your rental fleet is a machine ready to go to work and provide the productive power your
customers want. All Toro equipment is also designed with the user in mind, offering easy-to-use controls and a
variety of built-in safety features. It all adds up to a line of equipment that’s in demand and will deliver a solid
return on your investment for years to come.
Call your local Toro Rental Representative today or visit toro.com/rental for more information.
BLADE SHARPENINGPro-SHArP
Toro is pleased to offer Pro-Sharp Blade Sharpening Service
to our valued customers — you'll always have sharp blades for your
Toro equipment.
Toro’s Pro-Sharp Blade Sharpening Service is very similar to a
propane tank exchange program. Simply use the sharp blades from
your tote, and when you install the second to last sharp set from
your tote you’re ready to order Toro’s Pro-Sharp sharpening service.
Available on handle bar stump grinders
and brush chippers. For pricing, questions
or to order visit toro.com/Pro-Sharp or
call 1-800-348-2424ext.4997.
SErVICE
TORO’SPRO-SHARPBLADE-SHARPENINGSERVICE:•Helpsyouensurecustomer satisfaction•Controlexpenses•Maximizeprofitability
GetMoreFromToro