Tornet Catalog

PELAGIC TRAWLS

BRAIDED NYLON

Nylon Braided netting has been a traditional product in the fishing industry for several decades. It is produced out of high tenacity Nylon 6 yarns. All our netting is treated in Autoclave to stabilize and prevent shrinkage. Nylon nets can be bonded or not, depending on the application and customers need. We have two types of constructions for our Nylon Braided Netting: A – Made out of soft braided twines - used on the net body of the trawls B – Made out of hard braided twines - used on the Cod Ends of the trawls and Beam fishing.

A – “Soft” braided twines

Ref. Runnage m/Kg

Breaking Strenght Kgf

1684/1 600 104 1684/2 290 210 1684/3 190 310 1684/4 140 410 1684/5 110 490 1684/6 90 615 1684/7 78 710 1684/8 68 780

1684/10 60 1030

B – “Hard” braided twines

Diameter mm

Runnage m/Kg

Breaking Strenght

Kgf 2,0 380 155 2,3 275 205 2,5 180 300 3,0 120 372 3,5 105 500 4,0 85 585 4,5 75 677 5,0 65 733 6,0 52 950 8,0 39 1340 10 30 1450

LP. SL. Gran Canaria I Tel +34 928470127 I Ltd Iceland I Tel +354 555 78 88 I [email protected]

Euronete

Netting

1

These data are for guidance purposes only and subject to changes without prior notice.

EUROLINE PREMIUM®

Euroline Premium Netting has the following advantages: • Single mesh instead of double can now be used in larger cod

ends • Smaller twine can be used in existing trawls so greater towing

speed can be achieved • Lower fuel consumption • Much more economical than knotless netting material and only

slightly higher than standard Euroline® netting • Clean fishing, easy handling and good knot stability • Good abrasive resistance and stable elongation

Bottom Trawl Applications This is a significant aspect where there is a big advantage in using Euroline Premium® Netting. • Smaller diameter twines with the same breaking strength can be used

Mid Water Trawl Applications - Euroline Premium® Netting is made with filaments that are stronger than nylon fibres - Euroline Premium® Netting provides characteristics very suitable for mid water trawl applications: - Good Elongation - Good shock absorption - Good stretch recovery - High strength, high abrasion resistance Euroline Premium® is a polyethylene netting which, in addition to its strength and abrasion resistance, offers a clean fishing like all the polyethylene materials.


Euronete

Netting

2


EUROLINE PREMIUM PLUS®

Euroline Premium Plus® is the latest step forward in the new generation of netting materials available from Euronete. Euroline Premium Plus® Netting will provide the desired characteristics for trawls: • Smaller diameter twines can be used for the same strength • Good stretch recovery without major deformation • High abrasion resistance • Clean fishing (example: jelly fish will not adhere to the netting) • Economical if compared to Dyneema and Spectra To cover your needs On this line of Euroline Premium Plus® Netting, we decide to go only on the twine sizes from 1,0mm up to 5,5mm. This because we consider that, on the heavy sizes like the 6,0mm and 8,0mm, the present line of the Euroline Premium® netting is sufficiently strong for the needs.


Euronete

Netting

3


SUPER 12 PLUS BRAIDED

The SUPER 12 PLUS BRAIDED NET TWINES is a 12 strand Nylon product that has an in-house develop coating which stands for high resistance against abrasion. Other important characteristics of SUPER 12 PLUS are:

• Stabilised and impregnated to improve abrasion properties • Perfect diameter stability • Easy to handle and splice

The SUPER 12 BRAIDED NET TWINES can be supplied in natural colour or with three markers (red, green or blue). This material is supplied on plastic reels of around 24.0 kg


Euronete

Net Twines

4


- ete.pt

Euroneema® becomes LANKOFORCE®

This is a name change only. The specifications of the former Euroneema® ropes are exactly the same as those of the LANKOFORCE® ropes bellow.

12 STRANDS LANKOFORCE®

ABRASION RESISTANCE – excellent

CONSTRUCTION – 12 strand plaited

CHEMICAL RESISTANCE – good

MELTING POINT – approx 147Cº

UV RESISTANCE – excellent

WATER ABSORPTION – 0%

SPECIF GRAVITY – 0,98

TCLL VALUE – 100%

12 strand braided rope, made of Dyneema® SK75 yarns.

This rope forms an excellent alternative for heavy and lumbersome steelwire ropes in situations requiring manual handling of the rope.

The strength is higher than that of conventional steelwire rope and the corresponding weight is 7 times lower!

The better handling characteristics are especially appreciated in towing and mooring applications.

This rope is floating! When replacing fibre rope the reduction in diameter can lead to substantial saving of weight and size of e.g. the mooring winches, and when incorporated in the design of the vessel at newbuilding to a saving of cost as well.

Diameter Weight MBF mm g/m kN tf

6 23 39 4,0 8 39 64 6,5

10 59 97 9,9 12 93 138 14,1 14 100 184 18,8 16 140 244 24,9 18 180 303 30,9 20 215 374 38,2 22 280 450 45,9 24 335 533 54,4 26 375 612 62,4 28 435 701 71,5 30 515 789 80,5 32 578 887 90,5 34 637 991 101 36 694 1 076 110 38 783 1 191 122 40 866 1 314 134 44 1 062 1 559 159 48 1 228 1 853 189 52 1 490 2 160 220 56 1 760 2 490 254 60 2 020 2 820 288 64 2 300 3 210 328 68 2 590 3 610 368 72 2 900 4 010 409 76 3 230 4 250 434 80 3 580 4 510 460 88 4 300 5 320 543 96 5 100 6 230 636


Euronete

Ropes

5

(Dyneema)


12 STRANDS TIPTO TWELVE®

This rope is available in the diameter range of 16mm till 48mm and it is the successor of the well-known Tipto Eight®. The construction is different, the material remains the same. The 12-strands braided construction makes the rope rounder, more stable, more compact and more regular on the surface. This increases the abrasion resistance and the life-time of the rope even more.

CHEMICAL RESISTANCE – good ABRASION RESISTANCE – very good WATER ABSORPTION - 0% SPECIF GRAVITY – 0,93 UV RESISTANCE - very good CONSTRUCTION – 12 strand MELTING POINT – approx. 140º Cº TCLL VALUE – 70,7%


Euronete

Ropes

6


8 STRANDS TIPTOEIGHT®

The well known high performance rope. It’s strength, abrasion resistance and energy absorption ensure a long life-time and economical purchase. The small diameter and low weight make the handling on board easier.


Euronete

Ropes

7


8 STRANDS EUROSTEEL®

Eurosteel® 8st is a special rope for big traction forces work in marine application. A rope developed with the highest levels of excellence and quality.


Euronete

Ropes

8


8 STRANDS NYLON

The standard nylon rope for all purposes. Produced according the latest EN and ISO standards. It combines high (dry) strength and excellent abrasion resistance.


Euronete

Ropes

9


TWISTED NYLON

3 strand twisted ropes made of nylon. Rope made following EN and ISO standards, for several purposes.


Euronete

Ropes

10


Euronete

Ropes

11


A1

SteelDark blue

SteelForged

Dark blue

Vare nr. Str. VægtPart no. Size = Ø SWL A B C D E WeightParte no. Tamaño 5:1 Peso

mm Ton mm mm mm mm mm kg

A 16 FO 5/8” 16 2,4 30 28 22 22 150 0,87A 19 FO 3/4” 19 3,8 42 40 28 28 185 1,30A 22 FO 7/8” 22 5,3 57 48 34 34 230 2,20A 25 FO 1” 25 7,2 63 52 37 37 265 3,65A 28 FO 1 1/8” 28 9,0 65 52 37 37 280 4,30



A 08 ST G 5/16” 8 0,5 20 13 12 12 80 0,08A 10 ST 3/8” 10 0,6 32 28 25 31 123 0,23A 12 ST 1/2” 12 1,1 35 30 28 33 140 0,40A 14 ST 9/16” 14 1,3 40 38 33 37 168 0,65A 16 ST 5/8” 16 1,5 40 38 33 41 180 0,76A 19 ST 3/4” 19 2,4 50 38 35 47 200 1,30

Against extra charge are all swivels available:’C’ : Tested and with certificate’G’ : GalvanizedOn order add letter, e.g. A 12 ST G


SwivelsSteel

Dark blue

SwivelsSteel

Dark blue



A 28 ST 1 1/8” 28 10,0 50 50 50 50 285 5,60A 32 ST 1 1/4” 32 12,5 60 57 55 50 305 7,20A 38 ST 1 1/2” 38 15,4 72 60 55 55 340 9,90



A 25 BO 1” 25 6,5 45 45 45 40 245 3,80A 28 BO 1 1/8” 28 10,0 50 50 50 50 285 5,60A 32 BO 1 1/4” 32 12,5 60 57 55 50 305 7,60A 38 BO 1 1/2” 38 15,4 70 60 55 55 340 10,50

Against extra charge are all swivels available:’C’ : Tested and with certificateOn order add letter, e.g. A 32 ST C

Med hærdet slidringWith hardened wearing ringCon anilla templada de protección

A2


SwivelsSteel

Stainless steel centerLight blue



A 10 CTD 3/8” 10 1,0 29 29 25 31 135 0,29A 12 CTD 1/2” 12 1,6 33 30 28 36 143 0,38A 16 CTD 5/8” 16 2,6 40 38 35 41 178 0,83A 19 CTD 3/4” 19 4,0 46 38 35 51 205 1,40



A 12 CTH 1/2” 12 1,6 45 44 28 36 156 0,43A 16 CTH 5/8” 16 2,6 62 57 35 41 205 0,95A 19 CTH 3/4” 19 4,0 70 68 35 51 230 1,50

Against extra charge are all swivels available:’C’ : Tested and with certificateOn order add letter, e.g. A 12 CTD C

A3


Swivels with ring

Vare nr. Str. Beskrivelse Part no. Size DescriptionParte no. Tamaño Descripción

A 16 FO-R 5/8” A 16 FO + C 16-85 STOA 19 FO-R 3/4” A 19 FO + C 19-110 STOA 22 FO-R 7/8” A 22 FO + C 22-120 STOA 25 FO-R 1” A 25 FO + C 25-130 STOA 28 FO-R 1 1/8” A 28 FO + C 28-150 STO

A 25 BO-R 1” A 25 BO + C 25-130 STOA 28 BO-R 1 1/8” A 28 BO + C 28-150 STOA 32 BO-R 1 1/4” A 32 BO + C 32-150 STOA 38 BO-R 1 1/2” A 38 BO + C 38-150 STO

A 32 ST-R 1 1/4” A 32 ST + C 32-150 STOA 38 ST-R 1 1/2” A 38 ST + C 38-150 STO

Vare nr. Str. Beskrivelse Part no. Size DescriptionParte no. Tamaño Descripción

A 16 FO-P 5/8” A 16 FO + C 19-120 STPA 19 FO-P 3/4” A 19 FO + C 22-130 STPA 22 FO-P 7/8” A 22 FO + C 25-160 STPA 25 FO-P 1” A 25 FO + C 30-160 STP

Swivels are available with rings, thim-bles, recessed rings and splitlinks on inquiry.

A4


SwivelsStainless steel



A 06 SS 1/4” 06 0,27 14 14 14 14 64 0,05A 08 SS 5/16” 08 0,50 19 19 19 19 93 0,14A 10 SS 3/8” 10 1,10 30 28 20 20 110 0,23A 12 SS 1/2” 13 1,60 29 28 27 30 140 0,36A 16 SS 5/8” 16 3,20 43 38 35 47 180 0,89A 19 SS 3/4” 19 4,70 45 39 38 40 205 1,80A 19 SS L 3/4” 19 4,70 45 39 38 63 230 1,85A 22 SS 7/8” 22 6,30 45 40 40 42 222 2,25A 22 SS L 7/8” 22 6,30 45 40 40 65 250 2,40A 25 SS 1” 25 8,30 52 50 42 52 278 4,10A 25 SS L 1” 25 8,30 52 47 47 84 300 4,30A 32 SS 1 1/4” 32 12,00 60 50 50 98 350 8,15A 38 SS 1 1/2” 38 18,00 72 58 58 112 390 13,00

Against extra charge are all swivels available:’C’ : Tested and with certificateOn order add letter, e.g. A 32 SS C

A5



Flex



A 12 SSF 1/2” 13 1,6 30 28 28 34 160 0,56A 16 SSF 5/8” 16 3,2 41 38 37 48 200 1,20A 19 SSF 3/4” 19 4,7 44 40 40 54 235 2,00A 22 SSF 7/8” 22 6,3 44 40 40 55 255 2,90A 25 SSF 1” 25 8,3 55 50 45 70 320 4,70A 28 SSF 1 1/8” 28 10,4 55 50 50 80 330 6,14 A 32 SSF 1 1/4” 32 12,0 55 55 54 93 360 9,20 A 38 SSF 1 1/2” 38 18,0 62 58 60 110 410 14,60A 45 SSF 1 3/4” 45 28,0 75 70 70 115 515 24,00

Against extra charge are all swivels available:’C’ : Tested and with certificateOn order add letter, e.g. A 19 SSP C

Kan leveres med presning for OFG-kroge side B4Can be supplied with recess for OFG-hooks page B4Pueden ser entregados con rebajes para unirse con ganchos OFG, véase página B4

A6




A 12 SSS 1/2” 13 1,6 30 28 21 16 114 0,38A 16 SSS 5/8” 16 3,2 43 38 26 20 140 0,76A 19 SSS 3/4” 19 4,7 45 40 30 23 162 1,35A 22 SSS 7/8” 22 6,3 45 40 35 26 180 1,90A 25 SSS 1” 25 8,3 52 45 39 30 220 3,18A 32 SSS 1 1/4” 32 12,0 58 50 48 37 260 6,40 A 38 SSS 1 1/2” 38 18,0 55 50 58 41 290 10,00


For shackle

Against extra charge are all swivels available:’C’ : Tested and with certificateOn order add letter, e.g. A 19 SSS C

A7


Vare nr. VægtPart no. SWL A B C D E F G WeightParte no. 5:1 Peso

Ton mm mm mm mm mm mm mm kg

A 401 1,0 126 43 16 15 36 18 35 0,60A 402 2,0 157 54 20 20 45 22 45 1,50A 403 3,0 189 65 27 26 55 28 55 2,75A 405 5,0 220 70 33 30 64 33 60 3,90A 408 8,0 250 85 42 34 73 39 75 6,70A 412 12,0 295 95 50 41 86 45 86 10,60A 417 17,0 360 120 57 45 113 55 108 18,50A 422 22,0 435 131 60 52 118 63 118 29,70A 432 32,0 500 160 65 59 132 73 140 45,00A 445 45,0 700 220 102 74 190 100 200 130,00

Against extra charge are all swivels available:’C’ : Tested and with certificateOn order add letter, e.g. A 412 C

TætningsringOil sealAnilla de cierreBronce bøsningBronze bushingCojinete de bronzeLåseskruerLock screwsTornillos de cierreRullelejeRoller bearingRodamientoFedt lagerGrease reservoirDepósito de grasaSmøreanordningGrease fittingBoquilla de engrase

SwivelsSteel

Tapered roller thrust bearingGreaseable

A8


SwivelsSteel

Tapered roller thrust bearingGreaseable

Vare nr. VægtPart no. SWL A A1 B B1 B2 B3 C1 C2 D E F G WeightParte no. 5:1 Peso

Ton mm mm mm mm mm mm mm mm mm mm mm mm kg

A810-TL19 10,0 195 160 115 13 11 18 18 43 14 37 20 33 8,7A810-GF19 10,0 195 160 115 13 11 18 19 43 15 37 20 33 8,7A812-22 12,0 200 162 135 17 14 22 23 49 17 40 20 38 9,7A817-26 17,0 250 208 150 21 16 25 27 57 20 53 29 47 17,3

Against extra charge are all swivels available:’C’ : Tested and with certificateOn order add letter, e.g. A817-CA26C

TL = ParsonGF = Gunnebo

Vare nr. VægtPart no. SWL A B C D E F G H I J K WeightParte no. 5:1 Peso

Ton mm mm mm mm mm mm mm mm mm mm mm kg

A 702-EK 2,0 218 54 20 20 45 22 45 80,0 102 29,5 41,2 2,0A 705-EK 5,0 284 70 33 30 64 33 60 97,5 123 35,8 51,0 6,3A 708-EK 8,0 377 85 42 34 73 39 75 150,0 192 56,5 76,0 10,5A 712-EK 12,0 433 95 50 41 86 45 86 162,0 212 61,0 82,5 15,7

A9



Bronze bushing

Vare nr. VægtPart no. SWL A B C D E F WeightParte no. 5:1 Peso

Ton mm mm mm mm mm mm kg

A 304 4,0 169 49 29 26 50 25 1,60A 306 6,0 197 58 34 30 60 31 2,70A 308 8,0 224 68 40 34 69 35 4,40

Against extra charge are all swivels available:’C’ : Tested and with certificateOn order add letter, e.g. A 304 C

Bronce bøsningBronze bushingCojinete de bronze

LåseskruerLovk screwsTornillos de cierre

Fedt lagerGrease reservoirDepósito de grasa

A10


Fishing swivel

Ball bearing swivelElectrically insulated

Vare nr. Vægt Kæde str.Part no. SWL L A B E Weight Chain sizeParte no. 5:1 Peso P/cadena

Ton mm mm mm mm kg mm

LFS-10-8 2,5 144 39 42 42 1,1 10LFS-13-8 4,3 175 48 48 48 2,2 13LFS-16-8 6,4 215 62 60 61 3,7 16LFS-19-8 10,0 255 78 72 73 5,0 19

Vare nr. Vægt Kæde str.Part no. SWL L D Weight Chain sizeParte no. 5:1 Peso P/cadena

Ton mm mm kg mm

SKLI-7/8-8 1,6 75 48 0,7 7/8SKLI-10-8 2,6 95 59 1,4 10,0SKLI-13-8 4,3 120 75 2,9 13,0SKLI-16-8 6,4 137 90 4,9 16,0SKLI-18/20-8 10,0 159 104 7,2 19,0

A11


B1

Slip hooksBlue painted

Vare nr. Str. VægtPart no. Size SWL A B C WeightParte no. Tamaño 5:1 Peso

Ton mm mm mm kg

BS 06 6” 1,0 165 18 32 0,84BS 10 10” 1,5 254 19 48 2,05BS 12 12” 2,8 320 27 49 3,85BS 14 14” 4,8 350 27 50 5,75BS 15 15” 7,0 385 36 40 9,61BS 16 16” 11,0 385 36 64 17,80BS 16 – Heavy 16” 14,0 400 42x46 65 19,50

Against extra charge the hook can be delivered galvanized.

Yo - Yo hook

Vare nr. VægtPart no. SWL A B C D Ø WeightParte no. Peso

Ton mm mm mm mm mm kg

BY30 3,0 280 170 40 30 30 2,2BY40 5,0 300 185 40 30 40 3,9

BC

A

D

Ø


B2

Safety hooks

Vare nr. Vægt Part no. SWL SWL A B C D Weight Spare partsParte no. 5:1 4:1 Peso

Ton Ton mm mm mm mm kg

BK-5/6-10 1,0 1,25 110 22 28 28 0,4 BK-5/6-8/RBK-7/8-10 1,6 2,00 137 25 36 36 0,7 BK-7/8-8/RBK-10-10 2,5 3,20 168 34 44 44 1,5 BK-10-8/RBK-13-10 4,2 5,40 208 44 54 54 2,7 BK-13-8/RBK-16-10 6,4 8,00 254 56 63 63 5,6 BK-16-8/RBK-18/20-10 10,0 12,50 290 60 68 68 7,9 BK-18/20-8/R BK-22-8 12,4 15,50 320 70 80 80 11,2 BK-19-8/RBK-26-8 17,3 21,60 345 80 100 100 14,5 BK-26-8/RBK-28-8 20,0 25,00 400 90 120 120 22,0 BK-28-8/R

Vare nr. Vægt Part no. SWL A B C D Weight Spare partsParte no. 5:1 Peso

Ton mm mm mm mm kg

OBK-6-10 0,9 103 22 26 30 0,4 OBK-6-8/ROBK-7/8-10 1,6 129 25 34 40 0,7 OBK-7/8-8/ROBK-10-10 2,5 162 32 42 50 1,2 OBK-10-8/ROBK-13-10 4,2 195 40 50 60 2,0 OBK-13-8/ROBK-16-10 6,4 249 56 68 70 4,1 OBK-16-8/ROBK-18/20-8 10,0 293 22 73 85 7,5 OBK-18/20-8/ROBK-22-8 12,4 335 24 87 100 10,0 OBK-22-8/R

Vare nr. Part no. SWL A B C D E WeightParte no. 5:1


BKL-5/6-10 1,0 149 33 28 35 23 0,64BKL-7/8-10 1,6 183 36 36 45 27 1,10BKL-10-10 2,5 218 42 44 56 36 2,00BKL-13-10 4,2 280 48 54 70 47 3,80BKL-16-10 6,4 345 61 62 83 57 7,10BKL-18/20-10 10,0 367 74 69 90 70 11,10

Safety hooksWith swivel eye

BK OBK


B3

Vare nr. Vægt ReservedelePart no. SWL A B C D E F Weight Spare partsParte no. 5:1 Peso Repuestos


CL 06 C 0,9 108 23 29 34 21 10 0,50 CL06RCL 07 C 1,6 134 24 37 45 25 11 0,80 CL07RCL 10 C 2,5 170 32 48 58 34 14 1,60 CL10RCL 13 C 4,2 210 40 55 68 40 18 3,00 CL13RCL 16 C 6,4 254 50 68 83 53 22 6,00 CL16R

Safety hooks

Eye Type

Safety hooksWith swivel eye

Vare nr.Part no.Parte no.

SWL5:1

A B C D E FVægt

WeightPeso

CLE 06 CCLE 07 CCLE 10 CCLE 13 CCLE 16 CCLE 19 C

Ton

0,9 1,6 2,5 4,2 6,410,0

mm

148185229290335380

mm

283149606073

mm

283345546688

mm

303642536075

mm

222535405263

mm

10,013,016,020,023,027,0

kg

0,701,102,003,807,1011,10


B4

Vare nr. VægtPart no. SWL A B C D WeightParte no. 5:1 Peso

Ton mm mm mm mm kg

EK-6-10 0,9 29 94 22 10 0,3EK-7/8-10 1,6 32 108 28 13 0,5EK-10-10 2,5 42 134 34 15 1,0EK-13-10 4,2 49 166 44 19 2,0EK-16-10 6,4 60 203 56 24 3,8EK-18/20-10 10,0 69 229 60 26 5,3EK-22-8 12,0 83 267 64 31 8,9EK-26-8 17,0 95 301 66 32 12,1EK-32-8 25,2 105 333 76 38 17,7

Sling hooks

Sling hooks are against extra charge available with stainless safety pawlOn order add letter, e.g. EKN-10-8.

D

C

BA

Eye foundry hooks


Ton mm mm mm mm kg

OKE-7/8-10 1,6 63 123 13 12 0,7OKE-10-10 2,5 76 151 19 16 1,3OKE-13-10 4,2 89 184 25 19 2,8OKE-16-10 6,4 101 217 32 22 4,9OKE-19-8 10,0 114 247 38 27 7,1OKE-26-8 17,0 113 300 54 38 16,4OKE-32-8 25,2 145 384 62 48 35,0


Vare nr. VægtPart no. SWL A B C D E F G H WeightParte no. 5:1 Peso

Ton mm mm mm mm mm mm mm mm kg

BL 10-P 1,0 21 30 19 73 110 20 10,0 14,5 0,28BL 15-P 1,5 28 32 23 82 125 22 12,0 17,5 0,40BL 20-P 2,0 30 35 28 87 141 26 12,5 18,0 0,57BL 30-P 3,0 31 42 32 102 167 30 15,0 19,0 0,91BL 45-P 4,5 38 47 39 120 205 40 19,0 31,0 1,70

Cargo hooks

With stainless steel latch


Ton mm mm mm mm kg

ESH 07 C 1,6 24 94 24 12 0,5ESH 10 C 2,5 29 126 32 16 1,0ESH 13 C 4,2 37 152 40 17 1,7ESH 16 C 6,4 48 203 50 23 3,0ESH 19 C 10,0 60 241 62 27 5,4

Sling hooksWith pawl

C D

B

A

B5


B6

Purse ringsGalvanized

Stainless steel spring



BP 25A 25 2,25 335 37 29 150 200 4,2

Vare nr. Str. VægtPart no. Size = Ø SWL A B C D WeightParte no. Tamaño 5:1 Peso

mm Ton mm mm mm mm kg

BP 124G 25 0,7 292 77 29 28 2,5 BP 130G 30 1,0 320 85 33 30 4,0

Purse rings

C013Connector

CVR 25 - 150 STR.Alloyring

Boss S7Shookstainlesssteel

A

B

C

D

Ø

E


B7

Boss purse ringsStainless steel

Boss purse ringsStainless steel

w/roller

Vare nr. VægtPart no. SWL A B B1 C C1 D E G WeightParte no. 5:1 Peso


BOSS 40 SR 1,0 252 48 48 85 95 50 49 48 3,9BOSS 80 SR 1,8 330 48 70 120 155 66 64 75 8,4BOSS 90 SR 3,0 323 56 56 100 148 50 52 40 7,8BOSS 100 SR 1,8 365 53 53 122 190 50 52 50 8,4



BOSS 220 S 0,9 75 130 200 22 45 39 2,1BOSS 230 S 1,1 95 150 230 25 50 45 3,0BOSS 240 S 1,3 110 165 260 30 55 50 4,1BOSS 250 S 1,4 110 170 260 33 55 52 4,7BOSS 260 S 1,6 110 170 265 42 55 53 6,1BOSS 285 S 1,7 115 180 275 50 55 53 8,5

F


B8

Vare nr. VægtPart no. A B C WeightParte no. Peso

mm mm mm kg

BOSS CH10S 45 78 175 2,75BOSS CH11S 63 100 225 5,50BOSS CH12S 87 130 287 10,00

Boss choker hookStainless steel

Boss towing hook

Quick release hook

Vare nr. VægtPart no. SWL A B C WeightParte no. 5:1 Peso

Ton mm mm mm kg

BOSS TOW 10S 1,0 80 160 283 4,00BOSS TOW 15S 9,6 75 200 340 15,8

Vare nr. VægtPart no. SWL A B C F Weight Parte no. 5:1 Peso

Ton mm mm mm kg

BOSS RH 2T 2.0 165 138 23 V. 500 kg = 10 kg 1,6 V. 900 kg = 13 kg


C1

Vare nr. VægtPart no. Ø D WeightParte no. Peso

mm mm kg/100

C 06-30 SS R 6 30 2,7C 06-45 SS R 6 45 3,6C 06-60 SS R 6 60 5,2

C 08-45 SS R 8 45 6,5C 08-60 SS R 8 60 8,8C 08-90 SS R 8 90 13,2

C 10-60 SS R 10 60 14,0C 10-75 SS R 10 75 18,0C 10-90 SS R 10 90 20,0

C 12-60 SS R 12 60 21,0C 12-75 SS R 12 75 25,0C 12-90 SS R 12 90 29,0C 12 150 SS R 12 150 47,0

C 14-60 SS R 14 60 29,0C 14-75 SS R 14 75 35,0C 14-90 SS R 14 90 42,0

C 16-150 SS R 16 150 84,0C 16-200 SS R 16 200 110,0

C 19-75 SS R 19 75 67,0C 19-90 SS R 19 90 78,0C 19-150 SS R 19 150 119,0C 19-200 SS R 19 200 156,0

C 22-110 SS R 22 110 120,0

C 25-110 SS R 25 110 167,0C 25-125 SS R 25 125 200,0

RingsStainless steel


C2

SpectaclesGalvanized

Vare nr. Str. VægtPart no. Size = Ø A B WeightParte no. Tamaño Peso

mm mm mm kg/100

CS 12 GA 1/2” 12 40 125 30,0CS 16 GA 5/8” 16 41 140 60,0

Vare nr. Str. VægtPart no. Size = Ø A B WeightParte no. Tamaño Peso

mm mm mm kg/100

CS 08 SS 5/16” 8 60 45 21,0CS 10 SS 3/8” 10 75 60 44,0CS 12 SS 1/2” 12 75 60 63,0

*CS 08 SS-3 5/16” 8 60 60 26,4*CS 10 SS-3 3/8” 10 75 75 54,0*CS 12 SS-3 1/2” 12 75 75 75,0*CS 14 SS-3 9/16” 14 75 75 105,0

SpectaclesStainless steel

* Spectacles w/3 rings same size


C3

RingsStainless steel

Vare nr. Str. VægtPart no. Size = Ø A B D WeightParte no. Tamaño Peso

mm mm mm mm kg

C 12-60 SS BAR 1/2” 12 16 35 60 0,25

Vare nr. Str. VægtPart no. Size = Ø A B D WeightParte no. Tamaño Peso

mm mm mm mm kg

C 10-75 SS BOW 3/8” 10 18 113 75 0,22C 12-75 SS BOW 1/2” 12 18 117 75 0,34C 14-75 SS BOW 9/16” 14 18 121 75 0,46


C4

Vare nr. Str. VægtPart no. Size = Ø SWL A B WeightParte no. Tamaño 5:1 Peso

mm Ton mm mm kg

C 12-70 ST O 1/2” 12 1,0 70 30 0,20C 16-85 ST O 5/8” 16 1,7 85 35 0,40C 19-110 ST O 3/4” 19 3,2 110 45 0,70

C 22-120 ST O 7/8” 22 4,6 120 50 1,10C 25-130 ST O 1” 25 5,8 130 50 1,50C 28-150 ST O 1 1/8” 28 7,3 150 60 2,10

C 30-150 ST O 1 3/16” 30 10,0 150 60 2,50C 32-150 ST O 1 1/4” 32 12,7 150 60 2,80C 35-160 ST O 1 7/16” 35 12,5 160 75 3,20C 38-150 ST O 1 1/2” 38 15,0 150 60 4,20

RingsSteel

or stainless steel

Against extra charge are rings with Ø 12-25 mm available:’SS’ : Stainless steelOn order add letter, e.g. C 19-110 SS O


RingsSteel

or stainless steel

Vare nr. tgæV .rtSPart no. thgieW A LWS Ø = eziSParte no. oseP 1:5 oñamaT

gk mm noT mm

02,1 011 0,3 22 ”8/7 R TS 011-22 C09,1 521 5,3 52 ”1 R TS 521-52 C06,3 051 0,4 23 ”4/1 1 R TS 051-23 C

Vare nr. Str. VægtPart no. Size = Ø SWL A B C WeightParte no. Tamaño 5:1 Peso

mm Ton mm mm mm kg

C 12-75 ST P 1/2” 12 1,0 70 35 15 0,22C 12-125 ST P 1/2” 12 0,8 125 65 24 0,33C 16-110 ST P 5/8” 16 1,8 110 60 28 0,50C 19-120 ST P 3/4” 19 3,0 120 70 36 0,80C 22-130 ST P 7/8” 22 4,1 130 85 45 1,40C 25-160 ST P 1” 25 5,1 160 100 45 2,20C 30-160 ST P 1 3/16” 30 7,2 160 100 45 3,00

Against extra charge are all rings available:’SS’ : Stainless steelOn order add letter, e.g. C 19-120 SS P

C5


C6


mm Ton mm mm kg

M-6-10 3/8” 11 1,2 100 60 0,2M-86-10 1/2” 14 2,5 120 70 0,4M-108-10 5/8” 17 4,0 140 80 0,8M-13-10 3/4” 19 5,4 150 90 1,0M-1310-10 7/8” 22 7,5 160 95 1,5M-1613-10 1” 28 10,0 190 110 2,3M-19-10 1 3/16” 30 12,0 200 120 3,5M-2016-10 1 5/16” 34 17,0 240 140 5,2M-2220-10 1 1/2” 40 25,0 250 150 7,3M-2622-10 1 9/16” 42 28,0 250 150 7,8M-32-10 1 3/4” 45 33,0 300 180 11,7M-3226-10 2” 50 43,0 300 200 14,8M-3632-10 2 1/4” 55 56,0 350 200 20,7

MasterlinksGrade 10

Yellowpainted

MasterlinksGrade 10

Yellowpainted


mm Ton mm mm mm kg

MF-6-10 3/8” 11 1,2 100 60 6 0,2MF-86-10 1/2” 14 2,5 120 70 6 0,4MF-108-10 5/8” 17 4,0 140 80 8 0,8MF-1310-10 7/8” 22 7,5 160 95 10 1,5MF-1613-10 1” 25 10,0 190 110 13 2,3MF-2016-10 1 5/16” 34 17,0 240 140 16 5,3MF-2220-10 1 1/2” 38 25,0 250 150 19 7,0


D1

Split links


mm Ton mm mm kg/100

DS 10 GA L 3/8” 10 0,1 50 16 8,5DS 12 GA 1/2” 12 0,2 55 18 16,5DS 16 GA 5/8” 16 0,3 72 21 33,0DS 19 GA 3/4” 19 0,5 80 24 50,0DS 22 GA 7/8” 22 0,6 88 27 75,0

DS 10 SS L 3/8” 10 0,2 50 16 8,5DS 12 SS 1/2” 13 0,3 55 18 16,5DS 16 SS 5/8” 16 0,4 72 21 33,0DS 19 SS 3/4” 19 0,5 80 24 50,0DS 22 SS 7/8” 22 0,6 88 27 75,0

DS 14 CH 9/16” 14 0,5 60 18 20,0DS 16 CH 5/8” 16 0,7 72 21 33,0DS 19 CH 3/4” 19 1,4 80 23 55,0DS 22 CH 7/8” 22 1,8 88 27 75,0

Steel 60, galvanized

Stainless steel

Chrome steel, yellow galvanized

Vare nr. VægtPart no. SWL A B C WeightParte no. 5:1 Peso

Ton mm mm mm kg

BOSS DL 18 S 0,2 78 45 18 0,17BOSS DL 19 S 0,4 79 50 24 0,27BOSS DL 20 S 0,5 82 55 24 0,30BOSS DL 21 S 1,4 108 63 25 0,70BOSS DL 22 S 1,3 106 68 33 0,60

Boss split linkStainless steel


D2


SWL5:1

A B C D EVægt

WeightPeso

Kasser ABoxes of

Boxes

Ton mm mm mm mm mm kg pc

DV 15DV 30DV 50DV 80

1,53,05,08,0

102115130145

61708090

33424242

27303642

2,52,52,52,5

0,390,71,11,6

50302010


Ton mm mm mm mm kg

BOSS DL 26 S 2,4 150 95 38 28 1,65BOSS DL 27 S 5,0 212 132 58 31 3,60BOSS DL 28 S 12,0 260 170 60 49 9,60

Viking linkHigh tensile steel

Quenched and temperedForged

Boss linkStainless steel


D3


mm Ton mm mm mm mm kg/100

DC 08 SS B 8 0,060 80 14 28 14 8,5DC 10 SS B 10 0,100 116 16 36 22 19,0DC 12 SS B 12 0,160 115 16 36 22 27,0*DC 10 SS BR 10 0,100 115 16 36 22 19,5

*) Med ring på messingglider With ring on the brass sleeve Con anilla al mecanismo de cierre

Vare nr. Str. VægtPart no. Size = Ø SWL A C D WeightParte no. Tamaño 5:1 Peso

mm Ton mm mm mm kg/100

*DC 12 SS OS 12 0,180 118 24 20 25,0

* With screw thread at the brass sleeve

Carabine hooksStainless steel

Brass sleeveBow


Brass sleeveOval


D4

Carabine hooksLock screw

Galvanized

Carabine hooks



DC 10 GA S 10 0,7 100 11 16 10 14,0 DC 11 GA S 11 0,8 120 12 19 15 19,8DC 12 GA S 12 0,9 140 14 20 17 28,5

DC 08 SS S 08 0,7 80 09 13 08 7,2DC 10 SS S 10 1,1 100 12 16 10 13,2DC 11 SS S 11 1,3 120 13 19 15 19,1



DC 05 GA 05 0,10 50 5 7 7 1,9DC 06 GA 06 0,12 60 6 8 8 2,6DC 07 GA 07 0,18 70 7 10 9 4,4DC 08 GA 08 0,23 80 9 12 11 6,6DC 09 GA 09 0,24 90 9 12 11 9,0DC 10 GA 10 0,25 100 9 12 11 9,2DC 11 GA 11 0,35 120 11 15 12 13,0DC 12 GA 12 0,45 140 12 16 17 18,6

DC 05 SS 05 0,10 50 6 10 8 1,9DC 06 SS 06 0,12 60 8 11 9 2,8DC 07 SS 07 0,18 70 8 13 9 4,4DC 08 SS 08 0,23 80 8 13 9 6,6DC 10 SS 10 0,35 100 10 16 12 13,0DC 11 SS 11 0,45 120 11 18 16 19,0DC 12 SS 12 0,57 140 13 20 19 25,6

Galvanized

Stainless steel

Stainless steel


D5

Quick linksStainless steel

Vare nr. VægtPart no. Ø1 Ø2 SWL A B WeightParte no. 5:1 Peso

mm mm Ton mm mm kg

DQ 30 SSO 25 30 12,0 170 55 3,2

Vare nr. VægtPart no. SWL A B C D E WeightParte no. 5:1 Peso


BOSS S5S 1.00 27 66 111 23 19 0,5 BOSS S6S 1.25 38 77 132 27 25 0,6BOSS S7S 2.25 37 90 153 27 29 1,2

Boss hookStainless steel

Split hole Ø 5 mm


D6

Vare nr. Str. Vægt Antal/boxPart no. Size = Ø WLL A B C Weight Number/boxParte no. Tamaño 5:1 Peso No/caja

mm Ton mm mm mm KG/100 stk.

DQ 04 GA O 4 0,18 31 11 5,5 1,2 100DQ 05 GA O 5 0,28 39 13 6,5 2,1 100DQ 06 GA OK 6 0,40 45 14 8,0 3,5 100DQ 06 GA OL 6 0,35 59 14 15,0 4,2 100DQ 08 GA OK 8 0,70 58 17 13,0 7,7 100DQ 08 GA OL 8 0,65 72 17 18,0 9,3 50

DQ 10 GA O 10 1,00 85 20 20,0 16,0 50DQ 12 GA O 12 1,25 100 23 23,0 27,0 25DQ 14 GA O 14 2,00 115 27 27,0 42,0 10DQ 16 GA O 16 2,50 129 30 30,0 62,5 10DQ 18 GA O 18 3,00 143 33 33,0 88,0 10DQ 20 GA O 20 3,60 159 36 37,0 122,0 10

DQ 04 SS O 4 0,28 31 11 5,0 1,2 100DQ 05 SS O 5 0,45 39 13 6,5 2,1 100DQ 06 SS OK 6 0,65 45 14 7,5 3,5 100DQ 06 SS OL 6 0,58 59 14 15,0 4,2 100DQ 08 SS OK 8 1,10 58 17 10,0 7,7 100DQ 08 SS OL 8 0,98 72 17 18,0 9,3 50

DQ 10 SS O 10 1,60 85 20 20,0 16,0 50DQ 12 SS O 12 2,20 100 23 23,0 27,0 25DQ 14 SS O 14 3,10 115 27 27,0 42,0 10DQ 16 SS O 16 4,00 150 38 28,0 75,0 1DQ 19 SS O 19 5,50 175 43 32,0 120,0 1DQ 22 SS O 22 7,00 210 60 36,0 190,0 1

Galvanized

Stainless steel

Quick links


D7

Vare nr. Str. Vægt Antal/boxPart no. Size = Ø SWL A B C Weight Number/boxParte no. Tamaño 5:1 Peso No/caja

mm Ton mm mm mm kg/100 stk./pcs.

DQ 10 GA P 10 0,7 97 43 22 18,3 50DQ 12 GA P 12 0,9 120 52 24 32,1 25DQ 14 GA P 14 1,4 129 56 27 47,9 10DQ 16 GA P 16 2,0 144 63 31 71,7 10

DQ 10 SS P 10 1,1 97 43 20 18,3 50DQ 12 SS P 12 1,5 120 52 23 32,1 25DQ 14 SS P 14 2,1 129 56 25 47,9 10

DQ 16 SS P 16 2,3 144 63 29 80,0 1DQ 19 SS P 19 2,5 174 76 31 130,0 1DQ 22 SS P 22 4,0 210 95 40 199,5 1

Galvanised

Stainless steel

Quick links


Reinforced



DQ 22 SS PR 22 7,0 210 95 40 240,0DQ 25 SS PR 25 9,0 236 98 40 350,0


D8



DQB 03 GAO 03 0,10 29 10 5,0 0,4 100DQB 04 GAO 04 0,18 31 11 5,5 0,8 150DQB 05 GAO 05 0,28 39 13 6,5 1,2 100DQB 06 GAOK 06 0,40 45 14 7,5 2,1 50DQB 06 GAOL 06 0,35 59 14 12,0 4,2 50DQB 08 GAOK 08 0,70 58 17 10,0 5,6 50DQB 08 GAOL 08 0,65 72 17 16,0 9,3 50DQB 10 GAOL 10 1,00 82 22 18,0 17,0 20DQB 12 GAOL 12 1,25 104 25 20,0 28,0 10DQB 14 GAOL 14 1,75 112 30 25,0 41,0 8



DQB 06 SSOL 06 0,6 59 14 15,0 4,2 100DQB 08 SSOL 08 0,8 73 19 17,5 9,3 50DQB 10 SSOL 10 1,4 80 22 17,5 16,0 50DQB 12 SSOL 12 2,0 102 25 23,5 27,0 25DQB 14 SSOL 14 2,9 114 28 23,5 42,0 10


Galvanized




DC 06 SSA 06 0,12 60 10 9 2,90DC 08 SSA 08 0,32 80 15 11 7,50DC 10 SSA 10 0,50 100 20 15 14,00DC 12 SSA 12 0,70 120 25 19 23,40


E1

BMM G-hookHigh Tensile steel

BMM G-hookHigh Tensile steel

BMM recessed linkHigh Tensile steel



EAG 04 4,2 123 78 26 16 21 26 0,90EAG 06 6,4 175 103 28 21 32 28 2,65



EVR 08 8,0 175 97 38 15 22 1,4EVR 10 10,0 205 140 40 17 25 2,5

Vare nr. VægtPart no. SWL A B C C1 D E WeightParte no. 5:1 Peso


EVG 03 3,0 115 70 30 30 17 20 0,65EVG 05 5,0 132 82 38 38 17 26 1,20EVG 08 8,0 153 97 42 42 18 30 1,90EVG 10 10,0 180 115 40 30 18 35 3,30EVG 15 15,0 215 136 50 40 18 45 6,05EVG 20 20,0 240 155 60 50 27 50 8,40


E2

BMM Kelly’s EyeHigh Tensile steel

BMM Master link

Options ofcombinations

Vare nr. VægtPart no. SWL A B B1 C C1 C2 D E WeightParte no. 5:1 Peso


EVR 15 15,0 185 150 90 52 40 65 17 25 2,2EVR 20 20,0 225 185 125 80 45 106 25 41 5,1

EVG 03 EVG 05 EVG 08 EVG 10 EVG 15 EVG 20 EAG 04 EAG 06

EVR 08 X X XEVR 10 X XEVR 15 XEVR 20 XEVM 100 X X X XEVM 120 X XEVM 150 X XEVM 200 X

Vare nr. VægtPart no. SWL Ø A B C WeightParte no. 5:1 Peso

Ton mm mm mm mm kg

EVM 100 10,0 21 100 36 14 0,8EVM 120 12,0 25 122 48 16 1,7EVM 150 15,0 30 170 75 17 2,8EVM 200 20,0 34 185 85 25 4,2


E3

Vare nr. VægtPart no. Ø SWL A B C C1 C2 D E F G H Weight Parte no. 5:1 Peso-

mm Ton mm mm mm mm mm mm mm mm mm mm kg

E90-32S 32 12,0 285 115 - 52 95 43 110 - - - 8,0E90-38S 38 19,0 365 136 - 60 100 50 128 - - - 12,5E90-30S 30 12,0 267 114 45 - - 57 154 92 34 141 6,0E90-40S 40 19,0 267 114 45 - - 57 154 92 34 141 8,5E90S 40 19,0 315 135 50 - - 48 185 110 38 165 10,5

Stopper

Kellys eye



E90-25 25 7,0 220 135 75 33 85 2,8E90-30 30 12,0 300 200 123 43 110 6,5E90-38 40 19,0 360 235 145 50 135 12,0E90-40 40 19,0 310 205 123 43 120 9,8

Reservedele, Spare parts, Repuestos:

PE90-32: Bolt/Pin for stopper / Pasador p/reténSE90-32: Split for stopper / Punzón p/retén

E90-32SE90-38S

E90-30SE90-40SE90S


E4

Stopper

Vare nr. VægtPart no. SWL Ø A B C D E F WeightParte no. 5:1 Peso


E90-407S 12,0 32 220 88 36 40 140 100 3,3

Kellys eye

Vare nr. VægtPart no. SWL Ø A B C D E WeightParte no. 5:1 Peso


E90-406 12,0 32 270 163 100 38 100 4,4

B M M

B

B M M

B


E5

Vare nr. Vægt For samleledPart no. A B C D Weight For connectorParte no. Peso P/conectores

mm mm mm mm kg

E600-05 175 50 5 22 0,33 7E600-07 190 70 7 22 0,36 10E600-09 210 85 9 22 0,41 13E600-11 220 100 11 22 0,45 16E600-13 240 115 13 22 0,50 19E600-15 250 125 15 22 0,55 22E600-17 265 140 17 22 0,65 26

Vare nr. Vægt Antal dorne For samleledPart no. A B C D Weight Number of punches For connectorParte no. Peso No. punzones P/conectores

mm mm mm mm kg

E600 160 170 25 21 6,8 4 10-13-16-19E601 160 170 25 21 5,1 0E610 160 200 35 28 7,2 2 19-22E611 160 200 35 28 6,1 0E650 120 190 32 - 1,7 0 13-16

Tool with punchesfor connectors

Punches

E600/E610: E650:


E6

Vare nr. Vægt BeskrivelsePart no. A B C Wire Weight DescriptionParte no. diameter Peso Decripción

mm mm mm mm kg

E 134-M 510 600 160 20-34 67,0 With motor for 380/220/110√ (Standard 380√)E 250-M 980 700 250 20-50 156,0

Vare nr. Vægt BeskrivelsePart no. A B C Wire Weight DescriptionParte no. diameter Peso Decripción

mm mm mm mm kg

E122 410 410 160 10-22 18,6 Med sving / with swing / c/brazo giratorio



E134-B 510 600 160 20-34 35,5 Med sving og bremse / with swing and brake / con brazo giratorio & trenoE 250 700 700 250 20-50 116,0 Med sving og bremse / with swing and brake / con brazo giratorio & treno

Wire vise

With motor

E 128 and E 134 are delivered with extra jaws for wire dia. 12-22 mm.

E 250 are delivered with 3 set changeable dies for wirerope dia. 20-50 mm

E 134-M E 250-M


E7

Wire splicing stand w/motorcomplete with wire vise

wire hold and splicing stand

Vare nr. Vægt Beskrivelse Part no. Weight DescriptionParte no. Peso Descripción

kg

E 200 142,0 E 134-M + E 150 + E 160


E8

Vare nr. Vægt For wire visePart no. A A B B C Weight For wire wiseParte no. max. min. max. min. Peso Por maquina de empalma

mm mm mm mm mm kg

E 160 2150 1335 1100 920 1000 70,0 E122/E128/E134/E134-ME 170 3000 2220 1290 1120 1100 120,0 E250/E250M

Splicing stand

Stand without wirevise and wirehold.


E9

Vare nr. Vægt MaterialePart no. A A B C Weight MaterialParte no. Peso Material

mm inch mm mm kg

EM 260 CH 260 10” 28 16 0,24 Chrom stål, hærdet spids

EM 310 CH 310 12” 28 20 0,37 Chrome steel, hardened tip

EM 350 CH 350 14” 38 25 0,81 Acero cromado, punta templada

EM 410 CH 410 16” 38 25 1,06 -EM 450 CH 450 18” 43 28 1,21 -EM 510 CH 510 20” 43 28 1,39 -EM 610 CH 610 24” 43 28 1,88 -EM 700 CH 700 28” 43 28 2,30 -EM 900 CH 900 36” 43 28 3,38 -

Marline spikes for wireChrome steel, hardened tip

Marlin spikesStainless steel

Vare nr. Vægt HåndtagPart no. A B Weight HandleParte no. Peso Mango de

mm mm kg

EM 170 SS 170 24 0,030 Træ/wood/madera EM 280 SS 280 32 0,125 Træ/wood/maderaEM 305 SS 305 33 0,260 Nylon/nylon/nylonEM 385 SS 385 43 0,460 Nylon/nylon/nylon


E10

Marline spikesStainless steel

Wire hold

Vare nr. Vægt BeskrivelsePart no. A C D Weight DescriptionParte no. Peso Descripción

mm mm mm kg

EM 260 SS E 260 25 160 0,65EM 260 SS G 260 25 160 0,65 m/grubbe, w/grove, c/ranuraEM 350 SS E 350 28 250 1,15EM 350 SS G 350 28 250 1,15 m/grubbe, w/grove, c/ranura

Vare nr. Max VægtPart no. Cable Ø WeightParte no. Peso

mm kg

E150 42 4,4

Marline spikes are available only with eye.


E11

Wire turntable

Vare nr. Str. Max. belastning VægtPart no. Size Max. load WeightParte no. Tamano Max. carga Peso

Ø =mm kg kg

EWK 0850 850 1500 87EWK 1000 1000 2500 112EWK 1500 1500 4000 153

The turntable are of sturdy steel construction.Further more the turntable is fitted with 3 adjustable locatin pins, which allow all sizes of wire rope reels to be used.


E12

Boss trawl release

Stainless steel

Vare nr. Type VægtPart no. Type A B C D WeightParte no. Tipo Peso

mm mm mm mm kg

BOSS 07-12 7-12 mm 78 59 29 15 0,4BOSS 12-16 12-16 mm 145 98 55 20 1,6BOSS 16-20 16-20 mm 167 98 65 24 1,9

Vare nr. Type VægtPart no. Type A B C D WeightParte no. Tipo Peso

mm mm mm mm kg

TRAWL 12-16 12-16 mm 145 98 68 20 1,5

TrawlreleaseSteel


E13

Brailing net lockBrass and stainless steel

Vare nr. VægtPart no. A B WeightParte no. Peso

mm mm kg

BOSS BK 11 100 220 3,90BOSS BK 12 S 170 275 7,20

Reservedele/spare parts/repuestos:

1.

Sliding block

2.

Locking piece

3.

Pawl

4.

Latch

5.

Releasing

arm


E14

E 59 SS-333347

TriangleStainless steel

TriangleSteel, galvanized

Vare nr. Str. VægtPart no. Size A B WeightParte no. Tamaño Peso

Ø mm mm mm kg

E 55 16 270 240 1,5E 56 22 450 450 4,3

A

B

Vare nr. Str. VægtPart no. Size A B WeightParte no. Tamaño Peso

Ø mm mm mm kg

E 55SS 16 270 240 1,5E57SS-19-200 19 200 200 1,7E57SS-250 25 250 250 3,8E57SS-400 25 400 400 7,3E59SS-333347 30 470 330 9,6

E 55 SSE 57 SS-19-200E 57 SS-250

E 57 SS-400

B

A


E15

Vare nr. Tykkelse Vægt Part no. A B C D D2 Thickness WeightParte no. Grosor Peso

mm mm mm mm mm kg

E 60 220 28 190 125 130 20 3,5E 61 280 35 255 185 180 25 9,0E 63 - 320/320/320 320 30 280 230 230 30 12,3E 63 - 455/340/340 450 30 260 250 360 30 15,8

IcespadeGalvanized

Vare nr. Vægt BeskrivelsePart no. A B Weight DescriptionParte no. Peso Descripción

mm mm kg

E 65 770 180 3,1 Rør / Pipe / Tubo

E 66 840 180 6,0 Stang / Bar / Barra

E 67 650 180 5,0 Stang / Bar / Barra

Triangle w/6 holes

A

B

D2


E16

Vare nr. Vægt

Part no. A B C D E F G H I K L M N WeightParte no. Peso

mm mm mm mm mm mm mm mm mm mm mm mm mm kg

DIV 900 120 130 485 54 200 72 240 365 55 42 75 63 50 32,9

Vare nr. BeskrivelsePart no. DescriptionParte no. Descripción

DIV 900-LB Bolt Ø 42 / Pin Ø 42 / Pasador Ø 42

DIV 900-SB Bolt Ø 50 / Pin Ø 50 / Pasador Ø 50

DIV 900-LR Rør Ø 42 / Tube Ø 42 / Tubo Ø 42

DIV 900-SR Rør Ø 50 / Tube Ø 50 / Tubo Ø 50

Trawldoor fittings

Spare parts for sgnittif roodlwart


F1

Shackles, selfcoloured

Bow and pin equal thicknessSquare head pin

Dee type

Bow type

Vare nr. Str. Vægt Sække àPart no. Size SWL A B C D Weight Sacks ofParte no. Tamaño 5:1 Peso Sacos de

Ton mm mm mm mm kg/100

F 06 DS 1/4” 0,1 6 6 12 24 3,5 1000F 08 DS 5/16” 0,2 8 8 16 32 7,0 500F 10 DS 3/8” 0,3 10 10 20 40 13,5 300F 11 DS 7/16” 0,4 11 11 22 44 17,5 200F 12 DS 1/2” 0,5 12 12 25 48 25,0 150F 14 DS 9/16” 0,6 14 14 28 54 38,0 100F 16 DS 5/8” 0,8 16 16 32 60 55,0 70F 19 DS 3/4” 1,1 19 19 38 74 92,0 40F 22 DS 7/8” 1,5 22 22 44 85 138,0 30F 25 DS 1” 2,0 25 25 51 97 225,0 20F 28 DS 1 1/8” 2,6 28 28 56 107 316,0 10F 32 DS 1 1/4” 3,2 32 32 64 122 470,0 10F 38 DS 1 1/2” 4,5 38 38 76 146 700,0 6

Vare nr. Str. Vægt Sække àPart no. Size SWL A B C D E Weight Sacks ofParte no. Tamaño 5:1 Peso Sacos de

Ton mm mm mm mm mm kg/100

F 08 HS 5/16” 0,2 8 8 16 33 24 7,0 500F 10 HS 3/8” 0,3 10 10 20 42 30 14,0 300F 11 HS 7/16” 0,4 11 11 22 46 35 19,0 200F 12 HS 1/2” 0,5 12 12 25 52 39 26,0 150F 14 HS 9/16” 0,6 14 14 28 58 46 40,0 100F 16 HS 5/8” 0,8 16 16 32 67 48 55,0 70F 19 HS 3/4” 1,1 19 19 38 80 57 110,0 40F 22 HS 7/8” 1,5 22 22 44 92 66 150,0 30F 25 HS 1” 2,0 25 25 51 107 75 225,0 20F 28 HS 1 1/8” 2,6 28 28 56 117 84 330,0 10F 32 HS 1 1/4” 3,2 32 32 64 134 96 470,0 10F 38 HS 1 1/2” 4,5 38 38 76 114 114 798,0 6


F2

Shackles, selfcoloured

Oversized pinSquare head pin

Dee type

Bow type



FK 06 DS 1/4” 0,1 6 8 13 24 3,5 1000FK 08 DS 5/16” 0,2 8 10 16 31 7,0 500FK 10 DS 3/8” 0,3 10 13 19 37 13,0 300FK 13 DS 1/2” 0,5 13 16 26 50 30,0 150FK 16 DS 5/8” 0,8 16 19 32 64 60,0 70FK 19 DS 3/4” 1,1 19 22 37 74 100,0 40FK 22 DS 7/8” 1,5 22 25 39 82 150,0 30FK 25 DS 1” 2,0 25 28 43 85 210,0 20FK 28 DS 1 1/8” 2,6 28 32 49 105 310,0 10FK 32 DS 1 1/4” 3,2 32 36 58 115 440,0 10FK 38 DS 1 1/2” 4,5 38 42 63 122 720,0 6



FK 08 HS 5/16” 0,2 8 10 16 32 24 7,0 500FK 10 HS 3/8” 0,3 10 13 18 41 33 14,0 300FK 13 HS 1/2” 0,5 13 16 24 50 38 31,0 150FK 16 HS 5/8” 0,8 16 19 32 70 55 65,0 70FK 19 HS 3/4” 1,1 19 22 37 77 63 115,0 40FK 22 HS 7/8” 1,5 22 25 43 97 72 150,0 30FK 25 HS 1” 2,0 25 28 50 100 80 230,0 20FK 28 HS 1 1/8” 2,6 28 32 60 117 93 350,0 10FK 32 HS 1 1/4” 3,2 32 36 65 130 102 490,0 10FK 38 HS 1 1/2” 4,5 38 42 77 150 126 790,0 6


F3

Steel shacklesBlue

Dee type

Bow type



FK 10 DB 3/8” 1,0 10 12 18 43 15,0 250FK 13 DB 1/2” 1,5 12 16 27 56 30,0 250FK 16 DB 5/8” 2,5 16 19 33 67 60,0 80FK 19 DB 3/4” 3,0 19 22 39 80 105,0 40FK 22 DB 7/8” 4,0 22 25 45 80 145,0 30FK 25 DB 1” 5,0 25 28 48 92 210,0 20



FK 13 HB 1/2” 1,5 12 16 27 61 44 32,0 200FK 16 HB 5/8” 2,5 16 19 33 70 54 70,0 80FK 19 HB 3/4” 3,0 19 22 38 84 63 120,0 40FK 22 HB 7/8” 4,0 22 25 44 90 70 165,0 30FK 25 HB 1” 5,0 25 28 48 105 82 240,0 20

All blue shackles delivered stamped with SWL.


F4

Shackles, galvanizedScrew collar pin

Dee type

Bow type



F 05 DGE 3/16” 0,08 5 5 10 20 1,8 1000F 06 DGE 1/4” 0,10 6 6 12 24 3,4 1000F 08 DGE 5/16” 0,20 8 8 16 32 7,0 500F 10 DGE 3/8” 0,30 10 10 20 40 13,5 300F 11 DGE 7/16” 0,40 11 11 22 44 17,5 200F 12 DGE 1/2” 0,50 12 12 25 48 25,0 150F 16 DGE 5/8” 0,80 16 16 32 60 55,0 70F 19 DGE 3/4” 1,10 19 19 38 74 92,0 40F 22 DGE 7/8” 1,50 22 22 44 85 138,0 30F 25 DGE 1” 2,00 25 25 51 97 225,0 20



F 05 HGE 3/16” 0,08 5 5 10 21 15 1,8 1000F 06 HGE 1/4” 0,10 6 6 12 25 18 3,4 1000F 08 HGE 5/16” 0,20 8 8 16 33 24 7,0 500F 10 HGE 3/8” 0,30 10 10 20 42 30 14,0 300F 12 HGE 1/2” 0,50 12 12 25 52 39 26,0 150F 16 HGE 5/8” 0,80 16 16 32 67 48 55,0 70F 19 HGE 3/4” 1,10 19 19 38 80 57 110,0 40F 22 HGE 7/8” 1,50 22 22 44 92 66 150,0 30F 25 HGE 1” 2,00 25 25 51 107 75 225,0 20


F5

Shackles,countersunk pin

Dee typeGalvanized

Bow typeGalvanized



F 10 DGC 3/8” 0,30 10 10 20 40 13,5 300F 12 DGC 1/2” 0,50 12 12 25 48 25,0 150F 16 DGC 5/8” 0,80 16 16 32 60 55,0 70F 19 DGC 3/4” 1,10 19 19 38 74 92,0 40F 22 DGC 7/8” 1,50 22 22 44 85 138,0 30F 25 DGC 1” 2,00 25 25 51 97 225,0 20



F 10 HGC 3/8” 0,30 10 10 20 42 30 14,0 300F 12 HGC 1/2” 0,50 12 12 25 52 39 26,0 150F 16 HGC 5/8” 0,80 16 16 32 67 48 55,0 70F 19 HGC 3/4” 1,10 19 19 38 80 57 110,0 40 F 22 HGC 7/8” 1,50 22 22 44 92 66 150,0 30F 25 HGC 1” 2,00 25 25 51 107 75 225,0 20


F6

Shackles,countersunk pin

Dee typeSelfcoloured

Steel shacklesBlue

Vee type



F 10 DSC 3/8” 0,30 10 10 20 40 13,5 300F 12 DSC 1/2” 0,50 12 12 25 48 25,0 150F 16 DSC 5/8” 0,80 16 16 32 60 55,0 70F 19 DSC 3/4” 1,10 19 19 38 74 92,0 40F 22 DSC 7/8” 1,50 22 22 44 85 138,0 30F 25 DSC 1” 2,00 25 25 51 97 225,0 20



F 32 VB 1 1/4” 9,0 32 32 76 110 380,0 10


F7

Vare nr. Str. Vægt Sække áPart no. Size SWL A B C D E Weight Sacks ofParte no. Tamaño 6:1 Peso Sacos de


F06HGPE 1/4” 0,50 6 8 12 28 20 6,0 25F08HGPE 5/16” 0,75 8 10 13 31 21 11,0 25F10HGPE 3/8” 1,00 10 11 16 36 26 15,0 25

F11HGPE 7/16” 1,50 11 13 18 43 29 21,0 25F12HGPE 1/2” 2,00 13 16 22 51 32 37,0 25F16HGPE 5/8” 3,25 16 19 26 64 43 65,0 20

F19HGPE 3/4” 4,75 19 22 31 76 51 106,0 10F22HGPE 7/8” 6,50 22 25 36 83 58 156,0 5F25HGPE 1” 8,50 25 28 43 95 68 232,0 5

F28HGPE 1 1/8” 9,50 28 32 47 108 75 328,0 4F32HGPE 1 1/4” 12,00 32 35 51 115 83 451,0 3F35HGPE 1 3/8” 13,50 35 38 57 133 92 593,0 1

F38HGPE 1 1/2” 17,00 38 42 60 146 99 789,0 1F45HGPE 1 3/4” 25,00 45 50 74 178 126 1340,0 1F50HGPE 2” 35,00 50 57 83 197 146 1885,0 1

F57HGPE 2 1/4” 42,50 57 65 95 222 160 2606,0 1F65HGPE 2 1/2” 55,00 65 70 105 254 185 3786,0 1F75HGPE 3” 85,00 75 80 127 330 190 5868,0 1

Available in D-type, e.g. F28DGPE.

Green Pin shackleScrew collar pin


F8



F13 HGPH 1/2” 2,00 13 16 22 51 32 34,0 25F16 HGPH 5/8” 3,25 16 19 26 64 43 61,0 20F19 HGPH 3/4” 4,75 19 22 31 76 51 98,0 10F22 HGPH 7/8” 6,50 22 25 36 83 58 146,0 5F25 HGPH 1” 8,50 25 28 43 95 68 218,0 5F28 HGPH 1 1/8” 9,50 28 32 47 108 75 309,0 4F32 HGPH 1 1/4” 12,00 32 35 51 115 83 424,0 3F35 HGPH 1 3/8” 13,50 35 38 57 133 92 559,0 1

Vare nr. Str. Vægt Sække áPart no. Size SWL A B C D Weight Sacks ofParte no. Tamaño 6:1 Peso Sacos de


F13 DGPH 1/2” 2,00 13 16 22 51 32,0 25F16 DGPH 5/8” 3,25 16 19 26 64 55,0 20F19 DGPH 3/4” 4,75 19 22 31 76 88,0 10F22 DGPH 7/8” 6,50 22 25 36 83 137,0 5F25 DGPH 1” 8,50 25 28 43 95 205,0 5F28 DGPH 1 1/8” 9,50 28 32 47 108 284,0 4F32 DGPH 1 1/4” 12,00 32 35 51 115 386,0 3F35 DGPH 1 3/8” 13,50 35 38 57 133 517,0 1

Vare nr. Beskrivelse For sjækelPart no. Description For shackleParte no. Descripción Para grillete

mm

F13 KEY nøgle for bolt str. / key for pin size / llave para tamaño F13/F16/F19F22 KEY nøgle for bolt str. / key for pin size / llave para tamaño F22/F25F28 KEY nøgle for bolt str. / key for pin size / llave para tamaño F28/F32/F35

Green Pin shacklesSquare sunken hole

Bow type

Green Pin shackles

Square sunken holeDee type

C

B

D

A

E

AD

C

B


F9

Green Pin shackle, ”Super”Safety type

Green Pin shackleSafety type

Vare nr. Str. Vægt Sække áPart no. Size SWL A B C D E F G H Weight Sacks ofParte no. Tamaño 6:1 Peso Sacos de

Ton mm mm mm mm mm mm mm mm kg/100

F06HGPS 1/4” 0,50 6 8 12 28 20 41 16 44 5,5 25F08HGPS 5/16” 0,75 8 10 13 31 21 50 20 52 10,0 25 F10HGPS 3/8” 1,00 10 11 16 36 26 57 22 60 17,0 25F11HGPS 7/16” 1,50 11 13 18 43 29 67 25 70 24,0 25F12HGPS 1/2” 2,00 13 16 22 51 32 80 32 84 34,0 25F16HGPS 5/8” 3,25 16 19 26 64 43 95 38 104 63,0 20F19HGPS 3/4” 4,75 19 22 31 76 51 112 44 123 95,0 10F22HGPS 7/8” 6,50 22 25 36 83 58 127 50 136 155,0 5F25HGPS 1” 8,50 25 28 43 95 68 147 56 153 230,0 5F28HGPS 1 1/8” 9,50 28 32 47 108 75 165 64 176 324,0 4F32HGPS 1 1/4” 12,00 32 35 51 115 83 178 70 190 440,0 3F35HGPS 1 3/8” 13,50 35 38 57 133 92 194 76 216 600,0 1F38HGPS 1 1/2” 17,00 38 42 60 146 99 202 84 236 750,0 1F45HGPS 1 3/4” 25,00 45 50 74 178 126 243 100 286 1400,0 1F50HGPS 2” 35,00 50 57 83 197 146 269 115 320 1892,0 1F57HGPS 2 1/4” 42,50 57 65 95 222 160 303 130 350 2606,0 1F65HGPS 2 1/2” 55,00 65 70 105 254 185 329 140 407 4200,0 1F75HGPS 3” 85,00 75 80 127 330 190 373 180 505 6900,0 1F89HGPS 3 1/2” 120,0 89 95 146 381 238 495 200 590 12000,0 1

Available in D-type, e.g. F28DGPS.

Vare nr. Str. VægtPart no. Size SWL A B C D E F G H WeightParte no. Tamaño 5:1 Peso


F38HGPSUPER 1 1/2” 30 38 42 60 146 99 202 84 236 750F45HGPSUPER 1 3/4” 40 45 50 74 178 126 243 100 286 1400F57HGPSUPER 2 1/4” 55 57 57 83 197 138 269 133 365 2200


F10

Green Pin shacklesSquare head pin

Dee type

Type H

Bow type

Tipo Lira

Vare nr. Vægt Sækken áPart no. SWL A B C D Weight Sacks ofParte no. 6:1 Peso Sacos de


F12 DGPSQ 2,00 13 16 22 43 34,0 25F16 DGPSQ 3,25 16 19 26 51 63,0 20F19 DGPSQ 4,75 19 22 31 59 95,0 10F22 DGPSQ 6,50 22 25 36 73 155,0 5F25 DGPSQ 8,50 25 28 43 85 230,0 5F28 DGPSQ 9,50 28 32 47 90 324,0 4F32 DGPSQ 12,00 32 35 51 94 440,0 3F35 DGPSQ 13,50 32 38 57 115 600,0 1F38 DGPSQ 17,00 38 42 60 127 750,0 1F45 DGPSQ 25,00 45 50 74 149 1400,0 1

Vare nr. Vægt Sække áPart no. SWL A B C D E Weight Sacks ofParte no. 6:1 Peso Sacos de


F12 HGPSQ 2,00 13 16 22 51 32 34,0 25F16 HGPSQ 3,25 16 19 26 64 43 63,0 20F19 HGPSQ 4,75 19 22 31 76 51 95,0 10F22 HGPSQ 6,50 22 25 36 83 58 155,0 5F25 HGPSQ 8,50 25 28 43 95 68 230,0 5F28 HGPSQ 9,50 28 32 47 108 75 324,0 4F32 HGPSQ 12,00 32 35 51 115 83 440,0 3F35 HGPSQ 13,50 32 38 57 133 92 600,0 1F38 HGPSQ 17,00 38 42 60 146 99 750,0 1F45 HGPSQ 25,00 45 50 74 178 126 1400,0 1


F11



F04HSS 0.12 4,0 4 8 16 14 1,0F05HSS 0.20 5,0 5 10 20 17 2,0F06HSS 0.28 6,0 6 12 24 21 4,0F08HSS 0.50 8,0 8 16 32 28 7,0F10HSS 0.80 9,5 10 20 40 34 7,0F12HSS 1.10 12,0 12 24 48 42 25,0F16HSS 2.00 16,0 16 32 58 56 40,0F19HSS 3.00 20,0 20 38 66 65 60,0F22HSS 4.00 22,0 22 44 77 77 90,0F25HSS 5.00 25,0 25 50 88 87 110,0F32HSS 6.40 32,0 32 64 112 112 240,0



F04DSS 0.12 4,0 4 8 14 1,0F05DSS 0.20 5,0 5 10 18 2,0F06DSS 0.28 6,0 6 12 21 4,0F08DSS 0.50 8,0 8 16 28 7,0F10DSS 0.80 9,5 10 20 35 11,0F12DSS 1.10 12,0 12 24 42 25,0F16DSS 2.00 16,0 16 32 58 40,0F19DSS 3.00 20,0 20 38 66 60,0F22DSS 4.00 22,0 22 44 77 90,0F25DSS 5.00 25,0 25 50 88 110,0F32DSS 6.40 32,0 32 64 112 240,0

ShacklesStainless steel

Dee type

Type H

Bow type

Tipo Lira

F12

Boss ShacklesStainless steel


Ton mm mm mm mm kg

BOSS B 6 S 6,0 38 25 58 84 2,4BOSS B 8 S 8,0 50 33 75 114 3,8BOSS B 10 S 10,0 50 37 84 119 5,5BOSS B 15 S 15,0 64 44 101 141 9,5BOSS B 25 S 25,0 79 51 131 180 16,0


Ton mm mm mm mm kg

BOSS SL 11 S 3,0 122 20 27 62 0,9BOSS SL 12 S 6,0 136 24 34 74 1,8BOSS SL14 S 10,0 160 33 42 88 2,6



F13

High tensile shachlesSquare head pin

Blue pinDee type

Type H

Bow type

Tipo Lira

Vare nr. Vægt Sække áPart no. SWL A B C D Weight Sacks ofParte no. 6:1 Peso Sacos de


F12 DBPSQ 2,00 13 16 22 43 34,0 100F16 DBPSQ 3,25 16 19 26 51 63,0 50F19 DBPSQ 4,75 19 22 31 59 95,0 40F22 DBPSQ 6,50 22 25 36 73 155,0 20F25 DBPSQ 8,50 25 28 43 85 230,0 10F28 DBPSQ 9,50 28 32 47 90 324,0 10F32 DBPSQ 12,00 32 35 51 94 440,0 5F35 DBPSQ 13,50 35 38 57 115 600,0 5F38 DBPSQ 17,00 38 42 60 127 750,0 4F45 DBPSQ 25,00 45 50 68 149 1400,0 2

Vare nr. Vægt Sække áPart no. SWL A B C D E Weight Sacks ofParte no. 6:1 Peso Sacos de


F12 HBPSQ 2,00 13 16 22 51 32 34,0 100F16 HBPSQ 3,25 16 19 26 64 43 63,0 50F19 HBPSQ 4,75 19 22 31 76 51 95,0 40F22 HBPSQ 6,50 22 25 36 83 58 155,0 20F25 HBPSQ 8,50 25 28 43 95 68 230,0 10F28 HBPSQ 9,50 28 32 47 108 75 324,0 10F32 HBPSQ 12,00 32 35 51 115 83 440,0 5F35 HBPSQ 13,50 35 38 57 133 92 600,0 5F38 HBPSQ 17,00 38 42 60 146 99 750,0 4F45 HBPSQ 25,00 45 50 68 178 126 1400,0 2


F14

Vare nr. Str. Vægt Sække áPart no. Size SWL A B C D E F G H Weight Sacks ofParte no. Tamaño 6:1 Peso Sacos de


F12 HBPS 1/2” 2,00 13 16 22 51 32 80 32 84 34,0 100F16 HBPS 5/8” 3,25 16 19 26 64 43 95 28 104 63,0 50 F19 HBPS 3/4” 4,75 19 22 31 76 51 112 44 123 95,0 40F22 HBPS 7/8” 6,50 22 25 36 83 58 127 50 136 155,0 20F25 HBPS 1” 8,50 25 28 43 95 68 147 56 153 230,0 10F28 HBPS 1 1/8” 9,50 28 32 47 108 75 165 64 176 324,0 10F32 HBPS 1 1/4” 12,00 32 35 51 115 83 178 70 190 440,0 5F35 HBPS 1 3/8” 13,50 35 38 57 133 92 194 76 216 600,0 5F38 HBPS 1 1/2” 17,00 38 42 60 146 99 202 84 236 750,0 4F45 HBPS 1 3/4” 25,00 45 50 74 178 126 243 100 286 1400,0 2F50 HBPS 2” 35,00 50 57 83 197 146 269 115 320 1892,0 1

Available in D-type, e.g. F28 DBPS.

High tensile shachlesSafety type

Blue pin


F15



F13 HBPH 1/2” 2,00 13 16 22 51 32 34,0 25F16 HBPH 5/8” 3,25 16 19 26 64 43 61,0 20F19 HBPH 3/4” 4,75 19 22 31 76 51 98,0 10F22 HBPH 7/8” 6,50 22 25 36 83 58 146,0 5F25 HBPH 1” 8,50 25 28 43 95 68 218,0 5F28 HBPH 1 1/8” 9,50 28 32 47 108 75 309,0 4F32 HBPH 1 1/4” 12,00 32 35 51 115 83 424,0 3F35 HBPH 1 3/8” 13,50 35 38 57 133 92 559,0 1

Vare nr. Str. Vægt Sække áPart no. Size SWL A B C D Weight Sacks ofParte no. Tamaño 6:1 Peso Sacos de


F13 DBPH 1/2” 2,00 13 16 22 51 32,0 25F16 DBPH 5/8” 3,25 16 19 26 64 55,0 20F19 DBPH 3/4” 4,75 19 22 31 76 88,0 10F22 DBPH 7/8” 6,50 22 25 36 83 137,0 5F25 DBPH 1” 8,50 25 28 43 95 205,0 5F28 DBPH 1 1/8” 9,50 28 32 47 108 284,0 4F32 DBPH 1 1/4” 12,00 32 35 51 115 386,0 3F35 DBPH 1 3/8” 13,50 35 38 57 133 517,0 1

Vare nr. Beskrivelse For sjækelPart no. Description For shackleParte no. Descripción Para grillete

mm

F13 KEY ◆ nøgle for bolt str. / key for pin size / llave para tamaño F13/F16/F19F22 KEY ◆ nøgle for bolt str. / key for pin size / llave para tamaño F22/F25F28 KEY ◆ nøgle for bolt str. / key for pin size / llave para tamaño F28/F32/F35

Blue Pin shacklesSquare sunken hole

Bow type

Blue Pin shacklesSquare sunken hole

Dee type

C

B

D

A

E

AD

C

B


F16

Trawl shackles, longHexagon head pin

Dee type

Vare nr. Str. VægtPart no. Size SWL A B C D WeightParte no. Tamaño 6:1 Peso

Ton mm mm mm mm kg/pcs

FL32DS/40 1 1/4” x 1 1/4” 9,5 32 32 40 180 4,80FL32DS/50 1 1/4” x 1 3/8” 9,5 32 35 50 180 5,00FL32DS 1 1/4” x 1 3/8” 9,5 32 35 75 180 5,20FL38DS/50 1 1/2” x 1 3/4” 15,0 38 42 50 210 8,30FL38DS 1 1/2” x 1 3/4” 15,0 38 42 72 210 8,65FL45DS 1 3/4” x 2” 25,0 45 50 75 260 14,80FL50DS 2” x 2 1/4” 35,0 50 57 75 290 20,00


G1

Blue

BlueWith gusset

Vare nr. Vægt For wire max.Part no. A B C D E F Weight For wire max.Parte no. Peso P/cable max.

mm mm mm mm mm kg kg mm

G 215 K 15 109 27 5,0 10 49 0,46 12G 217 K 17 115 27 5,0 10 40 0,54 14G 219 K 19 125 32 5,0 12 43 0,67 16G 222 K 22 140 35 5,0 15 58 0,80 18G 225 K 25 158 45 6,3 16 59 1,36 22G 228 K 28 176 45 7,0 16 61 1,65 24G 230 K 30 195 47 7,0 18 78 2,00 26G 235 K 35 210 60 7,0 22 93 2,73 32

Vare nr. Vægt For wire max.Part no. A B C D E Weight For wire max.Parte no. Peso P/cable max.

mm mm mm mm mm kg mm

G 215 15 109 27 5,0 10 0,42 12G 217 17 115 27 5,0 10 0,50 14G 219 19 125 32 5,0 12 0,60 16G 222 22 140 35 5,0 15 0,75 18G 225 25 158 45 6,3 16 1,23 22G 228 28 176 45 7,0 16 1,54 24G 230 30 195 47 7,0 18 1,82 26G 235 35 210 60 7,0 22 2,40 32

Against extra charge wire thimbles are available galvanized. Add “G”, e.g. G 225 KG.


G2

Wire thimbleBlue

Wire thimbleBlue

With gusset

Vare nr. Vægt For wire max.Part no. A B C D E Weight For wire max.Parte no. Peso P/cable max.


G 712 12 84 23 4,0 8 0,21 10G 715 15 95 27 5,0 10 0,40 12G 717 17 100 27 5,0 10 0,48 14G 719 20 112 32 5,0 12 0,60 16G 722 22 125 35 5,0 15 0,71 18G 725 25 150 45 6,3 16 1,21 22G 728 28 157 45 7,0 16 1,60 24G 730 30 170 47 7,0 18 1,91 25G 735 35 190 60 7,0 22 2,36 32G 740 40 212 70 9,0 36 3,46 36 G 745 45 228 70 7,0 27 3,54 38G 750 50 255 75 7,0 35 4,20 42G 755 55 268 80 7,5 31 4,80 48

Vare nr. Vægt For wire max.Part no. A B C D E F Weight For wire max.Parte no. Peso P/cable max.


G 712 K 12 84 23 4,0 8 24 0,36 10G 715 K 15 95 27 5,0 10 31 0,52 12G 717 K 17 100 27 5,0 10 38 0,55 14G 719 K 20 112 32 5,0 12 46 0,65 16G 722 K 22 125 35 5,0 15 47 0,90 18G 725 K 25 150 45 6,3 16 61 1,26 22G 728 K 28 157 45 7,0 16 56 1,64 24G 730 K 30 170 47 7,0 18 68 2,02 25G 735 K 35 190 60 7,0 22 73 2,50 32G 740 K 40 212 70 9,0 36 80 3,70 36 G 745 K 45 228 70 7,0 27 94 3,71 38G 750 K 50 255 75 7,0 35 97 4,65 42G 755 K 55 268 80 7,5 31 99 4,90 48Against extra charge wire thimbles are available galvanized. Add “G”, e.g. G 725 KG.


G9

Vare nr. Str. For wire Vægt Antal pr. pakkePart no. Size For wire Weight Numbers in box Parte no. Tamaño p/cable Peso No./caja

mm Kg/100

H50-03 1/8” 3,0 0,72 100H50-05 3/16” 5,0 1,14 100H50-06 1/4” 6,5 1,40 100

H50-08 5/16” 8,0 2,35 100H50-10 3/8” 10,0 4,85 20 H50-11 7/16” 11,0 6,15 20

H50-13 1/2” 13,0 10,64 20H50-14 9/16” 14,0 11,94 20 H50-16 5/8” 16,0 18,27 20

H50-19 3/4” 19,0 22,74 10H50-22 7/8” 22,0 28,07 10H50-25 1” 26,0 38,90 10H50-28 1 1/8” 30,0 62,00 10H50-32 1 1/4” 34,0 72,00 10H50-38 1 1/2” 40,0 89,00 10

Vare nr. Str. For wire Vægt Antal pr. pakkePart no. Size For wire Weight Numbers in box Parte no. Tamaño p/cable Peso No./caja

mm Kg/100

H50-02SS 1/12” 2,0 0,50 100H50-03SS 1/8” 3,0 0,70 100H50-04SS 5/32” 4,5 0,90 100H50-05SS 3/16” 5,0 1,15 100H50-06SS 1/4” 6,0 1,40 100 H50-08SS 5/16” 8,0 2,35 100 H50-10SS 3/8” 10,0 4,85 50H50-12SS 1/2” 12,0 9,70 50 H50-16SS 5/8” 16,0 18,30 20 H50-20SS 3/4” 20,0 37,00 20

Wire rope clips

DIN 741 TYPE

Galvanized

Stainless


H1

Knives

HK 511RedCarbonIncl. sheat

HK 546BlueStainlessIncl. sheat

HK 711BlackCarbonIncl. sheat

HK 746BlackStainlessIncl. sheat

HK 19050Sort/black/negroPlast/rustfri/stainless10 pcs/cartõn/boxHK 39050Rød/red/rojoPlast/rustfri/stainless10 pcs/cartõn/boxHK 50433Sort/black/negroPlast/rustfri/stainless20 pcs/cartõn/box

HK 731RedCarbonIncl. sheat

HK 748BlueStainlessIncl. sheat

HK 018Dark redStainlessIncl. sheatCraftline Allround

HK 029OrangeStainlessIncl. sheatCraftline RopeWith ziz-zag-blade

VICTORINOX

VARE NR.

PART NO.

PARTE NO.

VARE NR.

PART NO.

PARTE NO.

VARE NR.

PART NO.

PARTE NO.

H2

VARE NR.

PART NO.

PARTE NO.

Knives

HK 1050Træ/wood/maderaRustfri/stainless12 pcs/cartõn/boxHK 1155PlastRustfri/stainless12 pcs/cartõn/boxHK 1047Træ/wood/maderaRustfri/stainless12 pcs/cartõn/boxHK 1145PlastRustfri/stainless12 pcs/cartõn/boxHK 1038Træ/wood/maderaRustfri/stainless12 pcs/cartõn/boxHK 1135PlastRustfri/stainless12 pcs/cartõn/boxHK 1040Træ/wood/maderaRustfri/stainless12 pcs/cartõn/box

HK 822Træ/wood/maderaRustfri/stainless12 pcs/cartõn/boxHK 825PlastRustfri/stainless12 pcs/cartõn/box

VARE NR.

PART NO.

PARTE NO.



H3

Tape

Needles

Vare nr. Bredde Meter/rulle Vægt/pakke Antal/pakke FarvePart no. Width Meter/roll Weight/pack Numbers/pack ColourParte no. Largo Metro/rollo Peso/paquete No/paquete Color

mm m gr. Stk./pcs.

TAP 15 BL 15 10 0,35 10 Blå/Blue/AzulTAP 15 RØ 15 10 0,35 10 Rød/Red/RojoTAP 15 GU 15 10 0,35 10 Gul/Yellow/AmarilloTAP 15 SO 15 10 0,35 10 Sort/Black/NegroTAP 19 BL 19 20 0,75 10 Blå/Blue/AzulTAP 19 RØ 19 20 0,75 10 Rød/Red/RojoTAP 19 GU 19 20 0,75 10 Gul/Yellow/AmarilloTAP 19 SO 19 20 0,75 10 Sort/Black/Negro

Vare nr. Antal/pose Vægt/posePart no. A B C Numbers/bag Weight/bagParte no. No/paquete Peso/paquete

mm mm mm Stk./pcs. kg

NÅL F1040 130 12,0 3,5 100 0,55NÅL F1092 150 7,5 3,0 100 0,35NÅL F1431 170 12,0 3,5 100 0,75NÅL F908 150 15,0 4,0 100 0,85NÅL F1041 170 20,0 4,0 100 1,25NÅL F987 200 33,0 5,0 100 2,00NÅL F1796 250 34,0 6,0 50 3,30


H4

Needles


mm mm mm Stk./pcs. kg

NÅL 451/TOKA 08 141 8 3,0 50 0,14NÅL 452/TOKA 10 172 10 5,0 50 0,27NÅL 453/TOKA 12 172 12 5,5 50 0,34NÅL 454/TOKA 13 128 13 3,6 50 0,24NÅL 455/TOKA 14 188 14 7,7 50 0,57NÅL 456/TOKA 15 150 15 3,8 50 0,35NÅL 457/TOKA 21 168 21 4,0 50 0,55NÅL 458/TOKA 25 204 25 4,2 50 0,80NÅL 459/TOKA 27 240 27 5,0 50 1,46


inch mm mm mm Stk./pcs. kg

NÅL 10 0,035NÅL 12 12” 300 38 8,4 50 0,055NÅL 14 14” 355 38 8,5 50 0,065NÅL 16 16” 405 44 8,7 50 0,065NÅL 20 20” 505 52 9.2 10 0,140

Vare nr. vægt Part no. A weight Parte no. peso

mm kg

HB 1500 1500 6,3

CrowbarA


H5

Maul

Vare nr. Længde Vægt u/skaftPart no. Length Weight without handleParte no. Largo Peso sin mango

mm kg

HMK 1 260 1HMK 2 300 1,5HMK 5 800 5

Vare nr. Længde Part no. Length Parte no. Largo

mm

HM 30 30 m / 100 ft.HM 50 50 m / 165 ft.

Measure Tape

Fiberglass tape

Vare nr. Længde Part no. Length Parte no. Largo

mm

HM 03 3,0 mHM 05 5,0 m


H6

Wire cutters

Reservedele Spare parts Repuestos

Vare nr. Wire Ø Længde Vægt Kæber Bolt Håndtag Part no. Wire Ø Length Weight Blades Pin HandleParte no. P/cables Ø Largo Peso Corte Pasador Manija Max. mm mm Kg

HC 07 7 190 0,27HC 09 9 335 0,71 HC09PHC 12 12 520 1,65 HC12B HC12P HC12HHC 16 16 650 2,50 HC16B HC16P HC16H

Chain cutters

Reservedele Spare parts Repuestos

Vare nr. Stål 50 max. Længde Vægt KæberPart no. Soft steel max. Length Weigth BladesParte no. Acero max. Largo Peso Corte

mm mm kg

HC 930 14,3 760 4,80 HC 930 JHC 936 15,9 915 6,80 HC 936 JHC 942 19,0 1070 9,80 HC 942 J

HC16

HC12

HC09HC07


H7

Vare nr. LængdePart no. LengthParte no. Largura

HKS 12 12”

Vare nr. Længde BeskrivelsePart no. Length DescriptionParte no. Largura Descripción

mm

Anvendes med olie el. vandDIV 715 150 x 50 x 25 To be used with oil/water Para uso con aceite/agua

Whetstone

Sharpening steel

Vare nr. LængdePart no. LengthParte no. Largura

mm

HX 310 10”HX 312 12”HX 315 15”

Vare nr. Længde TypePart no. Length TypeParte no. Largura Tipo

mm

HW 150 27” Enkelt/single-endedHW 153 12” Dobbelt/double-ended simple/doble

Adjustable spanner

Crocodilespanner

HW 150

HW 153


H8

Electric cutters

Vare nr. Strøm Vægt ElstikPart no. Power Weight Electric plugParte no.

kg

HSG-0-220 220 V / 60 w 1 European plug

Vare nr. Til el-kniv Part no. For electric knife Parte no.

HSG-0/R HSG-0/220

Blades

Electric knife for quick and efficient syntetic rope cutting. The rope ends are simultaneously heat sealed in cutting process.


H9

Vare nr. Længde Opdrift Antal/krt. m3/krt. Kilo/krt.Part no. Ø Length Buoyancy Quant./crt. m3/crt. Kilo/crt.Parte no. Larto Flotabilidad Num./ctn. Num./ctn Penso/ctn.

mm mm kg/kg/peso

JF 312 90 320 1,4 50 0,079 15JF 416 102 430 2,3 40 0,079 17JF 518 127 460 4,4 24 0,079 19JF 621 152 560 6,0 15 0,079 15

Standard farve: HvidStandard Colour: WhiteColor normal: Blanco

Vare nr. Længde Opdrift Antal/krt. m3/krt. Kilo/krt.Part no. Ø Length Buoyancy Quant./crt. m3/crt. Kilo/crt.Parte no. Larto Flotabilidad Num./ctn. Num./ctn Peso/ctn.

mm mm kg/kg/peso

JF 0520 125 510 5,0 20 0,079 16JF 0623 150 585 6,5 15 0,079 16JF 0822 200 560 14,0 10 0,079 18JF 0827 200 705 23,0 8 0,079 19JF 0839 200 990 34,0 6 0,079 20JF 1025 250 635 29,0 7 0,079 17JF 1035 250 890 33,0 5 0,094 18JF 1232 300 810 43,0 4 0,075 15JF 1242 300 1060 65,0 4 0,094 19JF 1550 380 1270 116,0 1 0,065 8JF 2255 550 1400 215,0 1 0,040 12

Standard Colour: White

Blowmoulded fenders with valve

Inflatable fenders with valves

Needles

NNF 06-110 110 6,5 50 0,18 US#1NNF 06-130 130 6,5 50 0,21 US#105NNF 08-110 110 8,5 50 0,20 US#2NNF 06-130 130 8,5 50 0,25 US#205NNF 08-160 160 8,5 50 0,29 US#209NNF 08-180 180 8,5 50 0,33


A

mm

B

mm

Antal/PoseNumbers/BagNo/Paquete

Stk./Pcs.

Vægt/poseWeight/Bag

Peso/Paquete

kg

KodeCode

NNF 10-110 110 10 50 0,24 US#3NNF 10-120 120 10 50 0,25 US#4NNF 10-130 130 10 50 0,26 US#5NNF 10-170 170 10 50 0,46 US#512NNF 10-200 200 10 50 0,55 US#514


A

mm

B

mm


Stk./Pcs.


Peso/Paquete

kg

KodeCode

NNF 12-120 120 12 50 0,31 US#55NNF 12-130 130 12 50 0,41 US#56NNF 12-170 170 12 50 0,54 US#57NNF 12-200 200 12 50 0,61 US#58


A

mm

B

mm


Stk./Pcs.


Peso/Paquete

kg

KodeCode


NNF 16-130 130 16 50 0,54 NNF 16-150 150 16 50 0,66 US#9NNF 16-180 180 16 50 0,78 US#812NNF 16-200 200 16 50 1,00 US#814NNF 16-240 240 16 50 1,16 US#816


A

mm

B

mm


Stk./Pcs.


Peso/Paquete

kg

KodeCode

H10



NNF 18-160 160 18 50 0,75 NNF 18-200 200 18 50 0,93 NNF 18-250 250 18 50 1,20



NNF 32-250 250 32 50 2,91 US#22NNF 32-280 280 32 50 3,32 US#23NNF 32-310 310 32 50 3,59 US#24NNF 32-400 400 32 50 3,88 US#25NNF 32-500 500 32 50 4,25 US#26


A

mm

B

mm


Stk./Pcs.


Peso/Paquete

kg

KodeCode

Needles

NNF 33-250 250 33 50 2,17 US#18NNF 33-280 280 33 50 2,89 US#19NNF 33-310 310 33 50 2,74 US#20


A

mm

B

mm


Stk./Pcs.


Peso/Paquete

kg

KodeCode

Low flage

H11


I1

Vare nr. Vægt ForPart no. Weight ForParte no. Peso Para

Kg/100

CO07B 0,20 CO07CO10B 0,50 CO10CO13B 1,20 CO13CO16B 2,30 CO16CO19B 4,00 CO19CO22B 6,00 CO22CO26B 8,00 CO26


Kg/100

CO07P 0,20 CO07CO10P 1,90 CO10CO13P 4,70 CO13CO16P 7,70 CO16CO19P 12,00 CO19CO22P 24,00 CO22CO26P 40,00 CO26

Spareparts for connectors

Also avaliable with spiralspring and galvanized collar.

CO-ConnectorsYellow painted

Vare nr. Vægt Antal/boxPart no. Breaking Load L B D b l Weight Number/boxParte no. Peso No/Caja

Ton mm mm mm mm mm Kg Stk./pcs.

CO 07 8,0 52 19 9 13 22 0,11 80CO 10 12,8 64 24 12 18 26 0,26 40 CO 13 21,6 86 32 16 23 36 0,62 20CO 16 32,0 100 40 20 27 40 1,05 10CO 19 50,0 122 47 23 33 46 1,58 5CO 22 60,0 150 49 24 34 59 3,00 5CO 26 85,0 160 58 29 36 61 4,60 1

Fås også blåmalet.Also avaliable bluecoloured.Disponible pintado de azul.


I2

Connectors

Vare nr. VægtPart no. S.W.L A B C D E WeightParte no. 5:1 Peso

Ton mm mm mm mm mm Kg

TL07 1,5 67 47 48 14,3 09 0,11TL10 2,5 89 63 64 19,2 13 0,36TL13 4,2 118 84 85 26,5 17 0,66TL16 6,4 144 95 106 32,0 19 1,08TL19 10,0 168 114 122 38,5 23 1,77TL23 12,0 206 140 150 49,0 28 2,80TL26 17,0 230 160 166 57,0 32 4,40 TL32 25,0 278 209 200 63,0 39 8,40


Kg/100

TL07B 0,20 TL07TL10B 0,50 TL10TL13B 1,20 TL13TL16B 2,30 TL16TL19B 4,00 TL19TL23B 5,00 TL23TL26B 6,50 TL26TL32B 9,00 TL32


Kg/100

TL07P 0,20 TL07TL10P 1,90 TL10TL13P 4,70 TL13TL16P 7,70 TL16TL19P 12,00 TL19TL23P 24,00 TL23TL26P 39,50 TL26TL32P 73,00 TL32



I3

Connectors

Vare nr. Min. hul for mont. Antal/kasse VægtPart no. SWL L B D b l r Min. hole for mounting Number/box Weight Parte no. 5:1 Ø abertura p/pasador Num./cart. Peso


G-7/8-8 1,6 56 18 8 13 22 9 14 40 0,16G-10-8 2,5 68 25 12 18 26 13 19 20 0,30G-13-8 4,2 88 29 15 23 33 15 24 20 0,69G-16-8 6,4 104 36 19 25 40 20 26 15 1,10G-19-8 10,0 125 43 22 30 48 23 32 10 1,80G-22-8 12,0 150 49 24 34 59 26 35 1 3,00G-26-8 17,0 160 58 29 36 61 30 38 1 4,60G-32-8 25,0 200 70 36 40 78 36 42 1 8,60

Vare nr. Min. hul for mont. Antal/kasse VægtPart no. SWL L B D b l r Min. hole for mounting Number/box Weight Parte no. 5:1 Ø abertura p/pasador Num./cart. Peso


GF-10-8 2,5 68 25 12 18 26 13 19 20 0,30GF-13-8 4,2 88 29 15 23 33 15 24 20 0,69GF-16-8 6,4 104 36 19 25 40 20 26 15 1,10GF-19-8 10,0 125 43 22 30 48 23 32 10 1,80GF-22-8 12,0 150 49 24 34 59 26 35 1 3,00

Fishing type


Vare nr. Vægt For Part no. Weight For Parte no. Peso Para kg

SKA-7/8 0,02 G-7/8-8SKA-10 0,10 G-10-8SKA-13 0,15 G-13-8SKA-16 0,20 G-16-8SKA-19 0,25 G-19-8SKA-22 0,35 G-22-8SKA-26 0,55 G-26-8SKA-32 0,80 G-32-8

Vare nr. Vægt For Part no. Weight For Parte no. Peso Para

kg

SKAF-10 0,10 GF-10-8SKAF-13 0,15 GF-13-8SKAF-16 0,20 GF-16-8SKAF-19 0,25 GF-19-8SKAF-22 0,35 GF-22-8

»G« »GF«


I4

CO-ConnectorsYellow painted

Vare nr. Vægt Antal/boxPart no. Breaking Load L B D b l Weight Number/boxParte no. Peso No/Caja

Ton mm mm mm mm mm Kg Stk./pcs.

COG 07C 8,0 52 19 9 13 22 0,11 80COG 10C 12,8 64 24 12 18 26 0,26 40 COG 13C 21,6 86 32 16 23 36 0,62 20COG 16C 32,0 100 40 20 27 40 1,05 10COG 19C 50,0 122 47 23 33 46 1,58 5COG 22C 60,0 150 49 24 34 59 3,00 5COG 26C 85,0 160 58 29 36 61 4,60 2COG 32C 125,0 172 73 40 38 66 8,30 2

Individually testet - with certifikat


I5

Alloy steel chainGrade 8

Long link

Mid Link

Short link

Vare nr. Meter/tønde VægtPart no. SWL D E H Meter/barrel WeightParte no. 5:1 Mits/baril Peso

Ton mm mm mm Kg/mtr.

HLL-9-8 2,0 9 57 16 150 1,4HLL-11-8 3,0 11 66 18 150 2,1HLL-13-8 4,2 13 81 22 150 2,7

LL-16-8 6,4 16 100 26 50-100 4,3LL-19-8 9,0 19 100 28 50-100 6,5LL-22-8 12,1 22 120 32 50-100 8,5LL-28-8 19,7 28 150 39 50 14,0LL-32-8 25,7 32 170 44 50 19,0



MLL-13-8 4,2 13 50 18 100 3,3MLL-16-8 6,4 16 65 29 100 5,1MLL-19-8 9,0 19 75 29 100 7,1MLL-22-8 12,1 22 88 30 50 9,4



KLL-13-8 4,2 13 39 17 100 3,4KLL-16-8 6,4 16 48 22 100 5,3KLL-19-8 9,0 19 57 26 50 8,0KLL-22-8 12,1 22 66 30 50 11,0

Avaliable yellow or blackpainted


Avaliable blackpainted

H D E

H D E

HD

E


I6

Mid Link

Short link



HLC-9-8 2,0 9 53 15 150 1,4HLC-11-8 3,0 11 64 19 150 2,1HLC-13-8 4,2 13 80 22 150 2,9

LLU-16-8 6,4 16 100 28 50-100 4,4LLU-19-8 9,0 19 100 28 50-100 6,5LLU-22-8 12,1 22 120 36 50-100 8,7



MLF-10-8 2,5 10 45 15 200 2,0MLF-13-8 4,2 13 50 15 100 3,3MLF-16-8 6,4 16 65 23 100 5,0MLF-19-8 9,0 19 75 30 50 7,2MLF-22-8 12,1 22 88 31 50 9,5



KLF-7-8 1,2 7 21 10 200 1,1KLF-10-8 2,5 10 30 15 200 2,2KLF-13-8 4,2 13 39 18 125 3,4KLF-16-8 6,4 16 48 22 92 5,3KLF-19-8 9,0 19 57 26 50 8,0KLF-22-8 12,1 22 66 30 50 11,0



Avaliable blackpainted

Alloy steel chainGrade 8

Long link

H D E

H D E

HD

E


I9

Vare nr. VægtPart no. SWL D E H WeightParte no. 6:1 Peso

Kg mm mm mm Kg/mtr.

LL-02-316 50 2 22 4 0,06LL-04-316 210 4 32 8 0,27LL-06-316 470 6 42 12 0,63LL-08-316 840 8 52 16 1,10LL-10-316 1310 10 56 20 1,75LL-13-316 2250 13 82 26 2,95LL-16-316 3350 16 82 32 4,45

Chain

Stainless

Long link

AISI 316DIN 763

Chain

Stainless

Short link

AISI 316DIN 766

Vare nr. VægtPart no. SWL D E H WeightParte no. 4:1 Peso

Kg mm mm mm Kg/mtr.

KL-03-316 100 3 16,0 5 0,16KL-04-316 315 4 16,0 6 0,32KL-05-316 490 5 18,5 7 0,50KL-06-316 700 6 18,5 8 0,75KL-07-316 960 7 22,0 9 1,00KL-08-316 1260 8 24,0 10 1,35KL-10-316 1960 10 28,0 14 2,25KL-13-316 3320 13 36,0 18 3,80

H D E

HD

E


Blokke / blocks / pastecas

K


BMM blocks

Galvanized

Head

Vare nr. Max load VægtPart no. SWL on head- Test A B C D MAX WeightParte no. fitting load WIRE Peso

Ton Ton Ton mm mm mm mm mm Kg KT 1- 1,0 2,0 4,0 163 22 16 80 16 1,7KT 2- 2,0 4,0 8,0 195 24 22 110 18 3,1KT 3- 3,0 6,0 8,0 257 28 31 150 20 6,4KT 4- 4,0 8,0 16,0 330 35 40 185 22 11,1KT 6- 6,0 12,0 24,0 365 42 40 210 24 17,0

BMM-Blokke skal bestilles med:BMM-Blocks must be ordered with:Pastecas BMM se pueden pedir con:

either Ball bearing; KT1, KT2 sealed ball bearings; KT3, KT4, KT6 greaseable ball bearings.

or Bronze bushing; All bronze bushings are greaseable.

either Swivel eye.

or Swivel hook. If the block is used with hook as suspension, the SWL is reduced with 50%

or Swivel fork, KT4, KT6.

or Swivel shackle eye, KT4, KT6.

Against extra charge are all blocks available:

’B’ Becket.

’C’ Tested with certificate.

’H’ Flame hardened sheave.

On order add letter, e.g. KT 2-1EGC.

1

0

E

K

F

S

K1


TopHead

Cabeza

Swivel eye Swivel hook Swivel shackle eye Swivel fork

Vare nr. VægtPart no. X Y Z WeightParte no. Peso

mm mm mm kg

PKT 1-1 50 17 28 0,10PKT 2-1 52 20 30 0,15PKT 3-1 67 20 41 0,20PKT 4-1 75 30 43 0,40PKT 6-1 85 30 51 0,45


mm mm mm kg PKT 1-0 57 20 28 0,10PKT 2-0 61 25 30 0,15PKT 3-0 67 25 35 0,20PKT 4-0 75 30 43 0,40PKT 6-0 85 30 51 0,45

Ball bearing

Pins

Blok vare nr. Block part no. M N O P O P Q L M R P K L M N R PPasteca art. no.

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm KT 1 25 38 13 65 20 82 25KT 2 23 55 16 94 25 94 28KT 3 26 66 20 110 30 105 30KT 4 35 68 23 134 38 132 38 29 42 35 93 104 23 40 65 30 134KT 6 40 90 25 153 46 170 46 33 46 42 104 104 23 40 65 30 134

Sheaves

Vare nr. VægtPart no. B D R S WeightParte no. Peso

mm mm mm mm kg SKT 1-1 22 80 47 17 0,60SKT 2-1 24 110 52 20 1,25SKT 3-1 28 150 47 20 2,65SKT 4-1 35 185 62 30 5,10SKT 6-1 42 210 76 30 7,70

Vare nr. VægtPart no. B D S WeightParte no. Peso

mm mm mm kg SKT 1-0 22 80 20 0,75SKT 2-0 24 110 25 1,30SKT 3-0 28 150 25 2,60SKT 4-0 35 185 30 5,20SKT 6-0 42 210 30 7,60

Ball bearing

K1A


BMM blocks

Galvanized

BMM-Bloks must be ordered with:



either Swivel eye.

or Swivel hook.






On order add letter, e.g. KT 2D-1EGC.

1

0

E

K

F

S

Head

Vare nr. Max load VægtPart no. SWL on head- Test A B C D MAX WeightParte no. 5:1 fitting load WIRE Peso

Ton Ton Ton mm mm mm mm mm Kg KT 1D- 1,0 2,0 4,0 187 22 16 80 16 3,1KT 2D- 2,0 4,0 8,0 224 24 22 110 18 5,2KT 3D- 3,0 6,0 12,0 296 28 31 150 20 11,0KT 4D- 4,0 8,0 16,0 385 35 40 185 22 19,0KT 6D- 6,0 12,0 24,0 425 42 40 210 24 27,8

K2


Sheaves






mm mm mm kg

PKT 1D-1 85 17 55 0,15PKT 2D-1 92 20 60 0,25PKT 3D-1 100 20 76 0,30PKT 4D-1 115 30 86 065PKT 6D-1 132 30 100 0,75


mm mm mm kg PKT 1D-0 85 20 56 0,20PKT 2D-0 92 25 61 0,36PKT 3D-0 102 25 70 0,38PKT 4D-0 118 30 86 0,66PKT 6D-0 133 30 100 0,76

Ball bearing Bronze bushing

Ball bearing Bronze bushing Pins

Blok vare nr. Block part no. M N O P O P Q L M R P K L M N R PPasteca art. no.


Head


K2A


BMM blocks

Galvanized




either Swivel eye.

or Swivel hook.






On order add letter, e.g. KT 2T-1EGC.

1

0

E

K

F

S

Head

Vare nr. Max load VægtPart no. SWL on head- Test A B C D MAX WeightParte no. 5:1 fitting load WIRE Peso

Ton Ton Ton mm mm mm mm mm Kg KT 1T- 1,0 2,0 4,0 187 22 16 80 16 4,5KT 2T- 2,0 4,0 8,0 224 24 22 110 18 7,5KT 3T- 3,0 6,0 12,0 296 28 31 150 20 15,8KT 4T- 4,0 8,0 16,0 385 35 40 185 22 27,4KT 6T- 6,0 12,0 24,0 425 42 40 210 24 40,0

K3


Sheaves






mm mm mm kg

PKT 1T-1 106 17 88 0,22PKT 2T-1 115 20 92 0,32PKT 3T-1 125 20 110 0,55PKT 4T-1 174 30 159 0,88PKT 6T-1 192 30 177 1,20


mm mm mm kg PKT 1T-0 106 20 88 0,28PKT 2T-0 115 25 92 0,41PKT 3T-0 125 25 110 0,66PKT 4T-0 174 30 159 0,88PKT 6T-0 192 30 177 1,20



Pins

Block part no. M N O P O P Q L M R P K L M N R P


Head


K3A


Vare nr. VægtPart no. SWL A B C D MAX WeightParte no. 5:1 WIRE Peso

Ton mm mm mm mm mm Kg KT 1-N 1,0 163 22 16 80 16 1,3KT 2-N 2,0 195 24 22 110 18 2,1KT 3-N 3,0 257 28 31 150 20 4,1

BMM blocks

Galvanized

Nylon sheave


Ton mm mm mm mm mm Kg KT 1D-N 1,0 187 22 16 80 16 1,9KT 2D-N 2,0 224 24 22 110 18 3,3KT 3D-N 3,0 296 28 31 150 20 6,6

On order add letter, e.g. KT 1-NEGC.

either Swivel eye.

or Swivel hook.


’B’ Becket.


E

K

TopHeadCabeza

K4


Head


mm mm mm kg SKT 1 N 22 80 17 0,15SKT 2 N 24 110 20 0,25SKT 3 N 28 150 20 0,55


mm mm mm kg

PKT 1 N 50 17 28 0,10PKT 2 N 52 20 30 0,15PKT 3 N 67 20 41 0,20


mm mm mm kg PKT 1D N 77 17 55 0,15PKT 2D N 82 20 60 0,25PKT 3D N 100 20 76 0,30

NylonskiveNylonRueda de nylon Sheaves

Pins

Blok vare nr. Block part no. M N O P O P QPasteca art. no.

mm mm mm mm mm mm mm KT 1-N 25 38 13 65 20 82 25KT 2-N 23 55 16 94 25 94 28KT 3-N 26 66 20 110 30 105 30

Swivel øje Swivel krogSwivel eye Swivel hookCáncamo giratorio Gancho giratorio

K4A


On order add letter, e.g. KT 1-1ESSB.


Ton mm mm mm mm mm Kg KT1-1ESS 1,0 163 22 16 80 16 1,7KT2-1ESS 2,0 195 24 22 110 18 3,2


Ton mm mm mm mm mm Kg KT1D-1ESS 1,0 187 22 16 80 16 2,8KT2D-1ESS 2,0 224 24 22 110 18 5,2

BMM blocks

Stainless steel

Ball Bearing


’B’ Becket.


Head

K5


Head

Vare nr.Part no. M N O PParte no.

Ton mm mm mm KT1-1ESS 23 34 13 65KT2-1ESS 22 54 16 94


Ton mm mm mm kg SKT1-1SS 22 80 40 17 0,60SKT2-1SS 24 110 47 20 1,25


Ton mm mm kg PKT1-1SS 50 17 28 0,10PKT2-1SS 52 20 30 0,15


Ton mm mm kg PKT1D-1SS 77 17 55 0,15PKT2D-1SS 82 20 60 0,25

Swivel eye

KuglelejerBall bearingRodamiento de bolas

Sheaves

Pins

K5A


Blok vare nr. Max load VægtBlock part no. SWL on head- Test A B D E F F1 G J MAX WeightPasteca art. no. 5:1 fitting load WIRE Peso

Ton Ton Ton mm mm mm mm mm mm mm mm mm kg KT 230-2 7,0 14,0 28,0 405 57 230 150 110 168 195 8 28 29,0KT 300-2 10,0 20,0 40,0 480 66 300 155 100 175 260 10 28 55,0KT 400-2 15,0 30,0 60,0 645 74 400 215 150 240 345 12 28 108,0KT 500-2 20,0 40,0 80,0 770 82 515 250 160 285 445 15 30 154,0

BMM-Tackle blocks

Blue painted

2: Roller bearing

either Swivel eye.

or Swivel fork.o

or Swivel shackle eye.


’B’ Becket.

’C’ Tested with certificate. ’G’ Galvanized.

’H Flame hardened sheave.

On order add letter, e.g. KT 230-2EG.

E

F

S


Head

K6


Swivel eye Swivel fork Swivel shackle eye

Blok vare nr. Block part no. M N O P K L M N R P L M R PPasteca art. no.

mm mm mm mm mm mm mm mm mm mm mm mm mm mm KT 230-2 40 90 31 280 140 29 52 84 35 175 36 50 45 115KT 300-2 48 90 35 181 140 29 52 84 35 175 43 58 50 125KT 400-2 58 110 50 225 195 51 85 115 65 260 51 73 60 150KT 500-2 75 140 55 280 195 51 85 115 65 260 51 73 60 150

Head

Sheaves

Pins


mm mm mm mm kg SKT 230-2 57 230 80 35 12,80SKT 300-2 66 300 100 45 18,20SKT 400-2 70 400 128 60 35,00SKT 500-2 76 515 140 65 42,50


mm mm mm Kg PKT 230-2 118 35 78 1,10PKT 300-2 140 45 79 1,90


mm mm mm Kg PKT 400-2 217 60 97 8,00PKT 500-2 242 65 112 9,50

K6A


BMM-Tackle blocksHead

Blue painted

2: Roller bearing

On order add letter, e.g. KT 230D-2EG.

either Swivel eye.

or Swivel fork.



’B’ Becket.


’H Flame hardened sheave.

E

F

S



Ton Ton Ton mm mm mm mm mm mm mm mm mm Kg KT 230D-2 9,0 18,0 36,0 405 57 230 150 110 168 195 8 28 54,0KT 300D-2 11,0 22,0 44,0 480 66 300 155 100 175 260 10 28 86,0KT 400D-2 15,0 30,0 60,0 645 74 400 215 150 240 345 12 28 166,0KT 500D-2 20,0 40,0 80,0 770 82 515 250 160 285 445 15 30 251,0

K7



mm mm mm mm mm mm mm mm mm mm mm mm mm mm KT 230D-2 48 90 32 181 140 29 52 84 35 175 39 50 45 115KT 300D-2 48 90 35 203 140 29 52 84 35 175 43 58 50 125KT 400D-2 58 110 50 225 195 51 85 115 65 260 51 73 60 150KT 500D-2 75 140 55 280 195 51 85 115 65 260 51 73 60 150

Head


Sheaves


mm mm mm mm kg SKT 230-2 57 230 80 35 12,80SKT 300-2 66 300 100 45 18,20



Ball bearing Roller bearing

Ball bearing Roller bearing


mm mm mm Kg PKT 230D-2 188 35 140 1,60PKT 300D-2 205 45 162 2,00


mm mm mm Kg PKT 400D-2 305 60 183 10,00PKT 500D-2 340 65 210 12,00

Pins

K7A


BMM-Tackle blocksHead

Blue painted

either Swivel eye.

or Swivel fork.



’B’ Becket.



’2’ Rollerbearing.

On order add letter, e.g. KT 230T-2EG.

E

F

S



Ton Ton Ton mm mm mm mm mm mm mm mm mm kg KT 230T-2 9,0 18,0 36,0 405 57 230 150 110 168 195 8 28 75,0KT 300T-2 11,0 22,0 44,0 480 66 300 155 100 175 260 10 28 122,0

K8



mm mm mm mm mm mm mm mm mm mm mm mm mm mm KT 230T-2 48 90 35 181 140 29 52 84 35 175 39 50 45 115KT 300T-2 48 105 38 203 140 29 52 84 35 175 43 58 50 125

Head




Ball bearing


mm mm mm Kg PKT 230T-2 256 35 208 2,30PKT 300T-2 285 45 242 2,90

Sheaves

Pins

K8A


BMM-Tackle blocks

BMM-Blocks must be ordered with:

either Ball bearing, greaseable.

or Bronze bushing, greaseable.

either Swivel eye.

or Swivel fork.





1

0

E

F

S


Head

Galvanized

Blok vare nr. Max load VægtBlock part no. SWL on head- Test A B D E F F1 G MAX WeightPasteca art. no. 5:1 fitting load WIRE Peso

Ton Ton Ton mm mm mm mm mm mm mm mm Kg KT 110- 3,0 6,0 12,0 270 85 110 150 128 85 70 28 9,0KT 150- 5,0 10,0 20,0 320 85 150 155 130 85 110 28 17,0KT 215- 8,0 16,0 32,0 415 100 215 215 145 100 170 28 36,0KT 150/180- 5,0 10,0 20,0 515 180 150 150 140 90 110 30 32,0

K9




mm mm mm mm mm mm mm mm mm mm mm mm mm mm KT 110 33 82 24 134 104 23 40 65 30 134 26 35 35 93KT 150 40 95 28 153 104 23 40 65 30 134 29 42 40 100KT 215 45 86 35 181 140 29 52 84 35 175 36 50 45 115KT 150/180 40 95 28 153


mm mm mm mm Kg SKT 110-1 85 110 62 25 3,60SKT 150-1 85 150 62 25 8,10SKT 215-1 100 215 80 35 18,30SKT 150/180-1 180 150 62 30 17,50

Head

Ball bearing

Ball bearing

Bronze bushing

Bronze bushing

Sheaves

Pins


mm mm mm Kg PKT 110-1 144 25 115 0,60PKT 150-1 154 25 122 0,70PKT 215-1 158 35 117 1,30PKT 150/180-1 250 30 217 1,55


mm mm mm Kg SKT 110-0 85 110 25 3,80SKT 150-0 85 150 25 8,20SKT 215-0 100 215 35 18,50


mm mm mm Kg PKT 110-0 144 25 115 0,60PKT 150-0 154 25 122 0,70PKT 215-0 158 35 117 1,30

K9A


BMM-Snatch blocksHead

Galvanized




either Swivel eye.

or Swivel hook.



’P’ Split pin at locking device.


On order add letter, e.g. KS 2-1EGP.

1

0

E

K

‘P’

A

Blok vare nr. Max load VægtBlock part no. SWL on head- Test A B D I MAX WeightPasteca art. no. fitting load WIRE Peso

Ton Ton Ton mm mm mm mm mm Kg KS 2- 2,0 4,0 8,0 225 24 110 23 18 3,7KS 3- 3,0 6,0 12,0 300 28 150 30 18 7,5KS 4- 4,0 8,0 16,0 330 35 185 33 22 13,5KS 6- 6,0 12,0 24,0 378 41 210 35 24 19,4

K10


Head

Blok vare nr. Block part no. M N O P O P QPasteca art. no.

mm mm mm mm mm mm mm

KS 2 23 55 16 94 25 94 28KS 3 26 66 20 110 30 105 30KS 4 35 68 23 134 38 132 38KS 6 40 90 25 153 46 170 46

Swivel eye Swivel hook

Sheaves


mm mm mm mm kg SKS 2-1 24 110 52 20 1,25SKS 3-1 28 150 47 20 2,65SKS 4-1 35 185 62 30 5,10SKS 6-1 42 210 76 30 7,70


mm mm mm kg SKS 2-0 24 110 25 1,30SKS 3-0 28 150 25 2,60SKS 4-0 35 185 30 5,20SKS 6-0 42 210 30 7,60



mm mm mm kg

PKS 2-1 52 20 30 0,15PKS 3-1 67 20 41 0,20PKS 4-1 75 30 43 0,40PKS 6-1 85 30 51 0,45


mm mm mm kg

PKS 2-0 61 25 30 0,25PKS 3-0 67 25 35 0,30PKS 4-0 75 30 43 0,40PKS 6-0 85 30 51 0,45


K10A


BMM-Snatch blocks

Blue painted

Roller bearing

either Swivel eye.


or Swivel fork.


’C’ Tested with certificate. ’H’ Flame hardened sheave.

E

S

F


On order add letter, e.g. KS300-2EH.

Blok vare nr. Max load VægtBlock part no. SWL on head- Test A B D E F F1 G I J MAX WeightPasteca art. no. 5:1 fitting load WIRE Peso

Ton Ton Ton mm mm mm mm mm mm mm mm mm mm Kg KS 230-2 7,0 14,0 28,0 380 57 230 120 70 140 195 42 8 28 31,0KS 300-2 10,0 20,0 40,0 440 66 300 130 70 150 260 45 10 28 51,0KS 400-2 15,0 30,0 60,0 595 70 400 180 105 210 345 70 12 28 106,0KS 500-2 20,0 40,0 80,0 800 76 515 220 130 260 445 85 15 30 165,0

K11



Head


mm mm mm mm mm mm mm mm mm mm mm mm mm mm KS 230-2 40 95 28 153 140 29 52 84 35 175 29 42 40 100KS 300-2 48 105 38 203 140 29 52 84 35 175 43 58 50 125KS 400-2 58 110 50 225 195 51 85 115 65 260 51 72 60 150KS 500-2 75 140 55 280 195 51 85 115 65 260 58 80 70 160

Sheaves

Pins


mm mm mm mm kg SKS 230-2 57 230 80 35 12,80SKS 300-2 66 300 100 45 18,20SKS 400-2 70 400 128 60 35,00SKS 500-2 70 515 140 65 42,50

Roller bearing


mm mm mm kg

PKS 400-2 217 60 97 8,00PKS 500-2 242 65 112 9,50


mm mm mm kg

PKS 230-2 118 35 78 1,10PKS 300-2 140 45 79 1,19

Roller bearing Roller bearing

K11A


On order add letter, e.g. KS 10RGC.

BMM-blocks must be ordered with:

either Swivel eye.

or Firm eye.



E

R

Head

Bronze bushing

BMM-Snatch blocks

GalvanizedBlok vare nr. Max load VægtBlock part no. SWL on head- Test A B D I WeightPasteca art. no. 5:1 fitting load Peso

Ton Ton Ton mm mm mm mm Kg KS 10 1,0 2,0 4,0 220 45 83 30 4,7KS 20 1,5 3,0 6,0 220 45 83 30 5,4KS 30 2,2 4,4 8,8 270 45 110 30 8,5

K12


Blok vare nr. Block part no. M O P M N O PPasteca art. no.

mm mm mm mm mm mm mm KS 10 32 14 58 38 40 16 92KS 20 32 14 58 38 40 16 92KS 30 40 16 72 38 48 19 112

Firm eye Swivel eye


mm mm mm mm SKS 10 45 83 20 1,50SKS 20 45 83 20 1,50SKS 30 45 110 20 2,30


mm mm mm mm PKS 10 103 20 63 0,30PKS 20 103 20 63 0,30PKS 30 133 20 95 0,40

Head

Sheaves

Pins

K12A


Bronze bushing

On order add letter, e.g. KS 50-RGC.


either Swivel eye.

or Firm eye.



E

R

Head BMM-Snatch blocks

Galvanized

Vare nr. Max load VægtPart no. SWL on head- Test A B D E I WeightParte. no. 5:1 fitting load Peso

Ton Ton Ton mm mm mm mm mm Kg KS 40 3,5 7,0 14,0 250 45 100 45 38 7,5KS 50 4,6 9,2 18,4 325 60 150 80 60 15,2KS 60 6,0 12,0 24,0 375 60 215 50 50 24,0

K13


Head

Blok vare nr. Block part no. M N O P M N O PPasteca art. no.

mm mm mm mm mm mm mm

KS 40 38 54 19 102 33 82 24 134KS 50 48 65 22 115 40 95 28 153KS 60 53 70 25 132 40 95 28 153

Firm eye Swivel eye

Bronze bushing Sheaves


mm mm mm Kg PKS 40 103 20 63 0,30PKS 50 103 20 63 0,30PKS 60 118 35 78 1,10


mm mm mm Kg SKS 40 45 110 20 2,30SKS 50 60 150 25 5,70SKS 60 60 215 35 11,30

Pins

K13A


BMM-Snatch blocks





’P’ Split pin at locking device.

1

0


On order add letter, e.g. KS 150-1EGC.

Galvanized

Blok vare nr. Max load VægtBlock part no. SWL on head- Test A B D E F G I WeightPasteca art. no. 5:1 fitting load Peso

Ton Ton Ton mm mm mm mm mm mm mm Kg KS 110- E 3,0 6,0 12,0 255 85 110 68 85 70 45 10,0KS 150- E 5,0 10,0 20,0 330 85 150 75 85 110 55 19,2KS 215- E 8,0 16,0 32,0 425 100 215 95 100 170 63 39,5

K14


Blok vare nr. Block part no. M N O PPasteca art. no.

mm mm mm mm KS 110 33 82 24 134KS 150 40 95 28 153KS 215 45 86 35 181


mm mm mm mm Kg SKS 110-1 85 110 62 25 3,60SKS 150-1 85 150 62 25 8,10SKS 215-1 100 215 80 35 18,30

Head

Ball bearing

Ball bearing

Bronze bushing

Bronze bushing

Sheaves

Pins


mm mm mm Kg PKS 110-1 144 25 115 0,60PKS 150-1 154 25 122 0,70PKS 215-1 158 35 117 1,30


mm mm mm Kg SKS 110-0 85 110 25 3,80SKS 150-0 85 150 25 8,20SKS 215-0 100 215 35 18,50


mm mm mm Kg PKS 110-0 144 25 115 0,60PKS 150-0 154 25 122 0,70PKS 215-0 158 35 117 1,30

Swivel eye

K14A


Vare nr. VægtPart no. SWL A B D M L N MAX WeightParte no. 5:1 WIRE Peso Ton mm mm mm mm mm mm mm Kg

KSW 1-NG 1,0 190 22 80 13 23 48 16 1,0KSW 1-NG-30 1,0 190 30 80 13 23 48 24 1,2KSW 1-1G 1,0 190 22 80 13 23 48 16 1,5KSW 1-1G-30 1,0 190 30 80 13 23 48 24 1,8KSW 1-0G 1,0 190 22 80 13 23 48 16 1,5KSW 1-0G-30 1,0 190 30 80 13 23 48 24 1,8

KSW 2-NG 2,0 255 24 110 15 28 56 18 1,9KSW 2-1G 2,0 255 24 110 15 28 56 18 2,9KSW 2-0G 2,0 255 24 110 15 28 56 18 3,0

KSW 3-NG 3,0 350 28 150 16 40 60 20 4,0KSW 3-1G 3,0 350 28 150 16 40 60 20 6,3KSW 3-0G 3,0 350 28 150 16 40 60 20 6,4

BMM-Swing blocks

BMM-Swing blocks

Galvanized

Vare nr. VægtPart no. SWL A B D M L N MAX WeightParte no. 5:1 WIRE Peso

mm mm mm mm mm mm mm mm Kg KSW 1 -1SS 1,0 190 22 80 24 13 48 16 1,6KSW 2 -1SS 2,0 255 24 110 28 15 56 20 2,9

Vare nr. Vægt For sjækelPart no. A B C Weight For shackleParte no. Peso Por grillete

mm mm mm Kg KSW 1-BESLAG 32 21 17,5 0,1 F 12 HGPSKSW 2-BESLAG 40 28 20,5 0,2 F 16 HGPS

Stainless steel

Mounting fitting

See group “F” for informations about shackles

K15


Sheaves


mm mm mm mm kg SKSW 1-N 22 80 17 0,15SKSW 1-1 22 80 40 17 0,60SKSW 1-1SS 22 80 40 17 0,60SKSW 2-N 24 110 20 0,25SKSW 2-1 24 110 47 20 1,25SKSW 2-1SS 24 110 47 20 1,25SKSW 3-N 28 150 25 0,55SKSW 3-1 28 150 52 20 2,65


mm mm mm kg SKSW 1-0 22 80 20 0,75SKSW 2-0 24 110 25 1,30SKSW 3-0 28 150 25 2,60



mm mm mm kg

PKSW 1-N 50 17 28 0,10PKSW 1-1 50 17 28 0,10PKSW 1-1SS 50 20 28 0,10PKSW 2-N 52 20 30 0,15PKSW 2-1 52 20 30 0,15PKSW 2-1SS 52 20 30 0,15PKSW 3-N 67 20 41 0,20PKSW 3-1 67 20 41 0,20


mm mm mm kg

PKSW 1-0 57 20 28 0,10PKSW 2-0 61 25 30 0,15PKSW 3-0 67 25 35 0,20


K15A


Blok vare nr. VægtBlock part no. SWL A B D E F F1 G J WeightPasteca art. no. 5:1 Peso

Ton mm mm mm mm mm mm mm mm kg K 130- 4,0 240 100 130 110 85 133 85 10 16,0K 170- 6,0 305 100 170 140 100 163 125 10 25,0K 215- 6,0 355 100 215 132 110 165 164 10 36,5K 230- 9,0 405 120 230 150 110 180 170 12 45,0K 240- 9,0 420 150 240 190 140 220 170 12 54,0K 300- 11,0 475 120 300 170 120 200 240 12 64,0K 370- 1 13,0 580 140 370 240 140 285 285 12 110,0K 400- 2 15,0 670 180 400 245 210 305 300 15 180,0

K400- 2 Available only with roller bearing.

BMM-Trawl blocksHead

Blue painted

On order add letter, e.g. K 230-1EG.




either Swivel eye.


or Swivel fork.

1

0

E

F

S



’G’ Galvanized.


K16




mm mm mm mm mm mm mm mm mm mm mm mm mm mm K 130 33 82 24 134 104 23 40 65 30 134 29 42 35 93K 170 40 95 28 153 104 23 40 65 30 134 33 46 42 100K 215 40 110 28 181 104 23 40 65 30 134 33 46 42 100K 230 48 100 32 192 140 29 52 84 35 175 39 50 45 115 K 240 48 100 32 192 140 29 52 84 35 175 39 50 45 115 K 300 48 105 38 203 140 29 52 84 35 175 43 58 50 125 K 370 58 110 50 220 165 39 70 103 50 215 51 72 60 145K 400 58 110 50 225 165 51 85 115 65 260 51 72 60 145


mm mm mm mm Kg SK 130-1 100 130 60 25 5,50SK 170-1 100 170 60 25 11,70SK 215-1 100 215 80 35 18,30SK 230-1 120 230 80 35 19,50SK 240-1 150 240 80 35 24,00SK 300-1 120 300 80 35 29,80SK 370-1 140 370 100 45 50,50SK 400-2 180 400 140 85 85,00

Head


Bronze bushing

Sheaves

Pins


mm mm mm mm Kg SK 130-0 100 130 37 25 5,70SK 170-0 100 170 37 25 12,00SK 215-0 100 215 56 35 18,50SK 230-0 120 230 56 38 20,10SK 240-0 150 240 56 38 24,00SK 300-0 120 300 56 38 30,70


mm mm mm Kg PK 130-0 155 25 123 0,60PK 170-0 155 25 123 0,70PK 215-0 158 35 117 1,30PK 230-0 190 38 133 1,60PK 240-0 220 35 165 1,80PK 300-0 190 38 133 1,60

Ball bearing


mm mm mm Kg PK 130-1 155 25 123 0,70PK 170-1 155 25 123 0,70PK 215-1 158 35 117 1,30PK 230-1 190 35 133 1,50PK 240-1 220 35 165 1,80PK 300-1 190 35 133 1,50PK 370-1 234 45 152 3,20PK 400-2 330 60 212 10,90

K16A


Blok vare nr. Max load Max VægtBlock part no. SWL on head- A B B1 D E F F1 G J wire WeightPasteca art. no. fitting Peso

Ton Ton mm mm mm mm mm mm mm mm mm mm kg*K 370-2A 13,0 26,0 580 140 140 370 260 120 245 285 12 28 115,0*K 400-2A 15,0 30,0 670 180 180 400 245 180 305 300 15 28 185,0*K 500-2A 20,0 40,0 785 180 180 500 285 185 345 380 20 30 275,0*K 600-2A 30,0 60,0 910 180 180 600 310 190 380 480 20 32 360,0*K 650-2A 30,0 60,0 975 240 220 650 335 225 415 500 20 34 500,0*K 800-2A 40,0 80,0 1120 240 220 800 340 240 440 600 20 38 750,0*K 1000-2A 60,0 120,0 1485 260 240 1000 485 270 570 825 25 44 1320,0


either Swivel eye.

or Swivel fork.

either Eye for shackle.

or Eye for icedavit.



’G’ Galvanized.


On order add letter, e.g. K600-2AIGH.

E

F

S

I

BMM-Trawl blocksHead

Blue painted

Roller bearing

Thrust bearing on top

*Are only supplied with full sideplates.*

K17


Head


mm mm mm mm mm mm mm mm mm mm mm mm mm mm K 370 58 110 50 220 165 39 70 103 50 215 51 72 60 145K 400 58 110 50 225 195 51 85 115 65 260 51 72 60 145K 500 75 140 50 280 195 51 85 115 65 260 58 80 70 160K 600 78 155 70 335 230 58 90 140 75 305 K 650 78 155 70 335 230 58 90 140 75 305 K 800 78 155 70 335 250 81 90 180 90 340



L M P R NBronze hulBonze hole

Agujero de bronze

K 400-2AK 500-2AK 600-2AK 650-2AK 800-2AK 1000-2A

mm

7878106106106125

mm

7070100100100160

mm

180180235235260310

mm

8085100100110130

mm

8085114114122144

mm

9191116116116150

Eye for icedavit


mm mm mm mm Kg SK 370-2 140 370 100 45 50,50SK 400-2 180 400 140 60 85,00SK 500-2 180 500 170 70 130,00SK 600-2 180 600 170 70 150,00SK 650-2 240 650 170 70 240,00SK 800-2 240 800 200 85 370,00SK 1000-2 260 1000 250 123 600,00


mm mm mm Kg PK 370-2 234 45 162 3,20PK 400-2 330 60 212 10,90PK 500-2 340 70 225 12,90PK 600-2 340 70 225 12,90PK 650-2 404 70 285 14,60PK 800-2 427 85 287 21,70PK 1000-2 475 123 323 33,00

Roller bearing

K17A

N


Blue painted

BMM-Trawl blocks, center

Blocks w/contraweight

TopHeadCabeza

Blok vare nr. VægtBlock part no. SWL A B C D E F F1 G J WeightPasteca art. no. 5:1 Peso

Ton mm mm mm mm mm mm mm mm mm kg KM 650-2A 30,0 975 240 220 650 335 225 415 500 20 535KM 800-2A 45,0 1120 240 220 800 340 240 440 600 20 795

Vare nr. VægtPart no. SWL A B B1 D F F1 G H I J K L WeightParte no. Peso

5:1 mm mm mm mm mm mm mm mm mm mm mm mm kg KK 650-2H 30 595 240 228 650 240 260 470 500 119 236 560 230KK 800-2H 40 670 240 228 800 240 360 600 500 119 236 560 300

K18


Swivel eye Swivel fork

Blok vare nr. Block part no. M N O P K L M N R P Pasteca art. no.

mm mm mm mm mm mm mm mm mm mm KM 650 78 155 70 335 230 58 90 140 75 305 KM 800 78 155 70 335 250 81 90 180 90 340

Head


mm mm mm mm Kg SK 400-2 180 400 140 60 85,00SK 500-2 180 500 170 70 130,00SK 600-2 180 600 170 70 150,00SK 650-2 240 650 170 70 240,00SK 800-2 240 800 200 85 370,00SK 1000-2 260 1000 250 123 600,00



Roller bearing


L M P R NBronze hulBonze hole

Agujero de bronze

KM 650-2AKM 800-2A

mm

106106

mm

100100

mm

235260

mm

100110

mm

114122

mm

116116

Eye for icedavit

Sheaves

K18A

N


Blok vare nr. Block part no. SWL A B C Pasteca art. no.

5:1 mm mm mm

K370-MP 13,0t 227 78,6 30K400-MP 15,0t 227 78,6 30K500-MP 20,0t 312 78,6 30K600-MP 30,0t 312 106 40K650-MP 30,0t 312 106 40K800-MP 40,0t 320 106 50K1000-MP 60,0t 320 125 60

Blok vare nr. Block part no. SWL A B Pasteca art. no. 5:1 mm mm

K370-PB 13,0t 180 78K400-PB 15,0t 180 78K500-PB 20,0t 192 78K600-PB 30,0t 248 105K650-PB 30,0t 248 105K800-PB 40,0t 268 105K1000-PB 60,0t 368 124

Blok vare nr. Block part no. SWL A B Pasteca art. no. 5:1 mm mm

K370-PS 13,0t 327 78K400-PS 15,0t 327 78K500-PS 20,0t 412 78K600-PS 30,0t 442 105K650-PS 30,0t 442 105K800-PS 40,0t 490 105K1000-PS 60,0t 510 124

Bronceleje

1.

2.

3.

A

B

C

A B

A

B

Bronceleje

1.

2.

3.

A

B

C

A B

A

B

Bronceleje

1.

2.

3.

A

B

C

A B

A

B

Mounting plates be -tween hinge suspension

& ship construction

Pin for blockeye

Pin for hinge suspension

K19


Hinge suspension

Blok vare nr. VægtBlock part no. SWL A B C D E G H I J K L Weight Bolt dia.Pasteca art. no. Peso

5:1 mm mm mm mm mm mm mm mm mm mm mm kg mm K 370-Kardan 13,0t 215 4 223 160 78,6 170 80 30 74 78,6 0 65 78 K 400-Kardan 15,0t 215 4 223 160 78,6 170 80 30 74 78,6 0 65 78K 500-Kardan 20,0t 300 4 308 160 78,6 185 80 30 80 78,6 4 80 78K 600-Kardan 30,0t 300 4 308 234 106,0 230 110 40 110 106,0 4 103 105K 650-Kardan 30,0t 300 4 308 234 106,0 230 110 40 110 106,0 4 103 105K 800-Kardan 40,0t 300 8 316 234 106,0 242 122 50 110 106,0 4 123 105K 1000-Kardan 60,0t 300 8 316 253 125,0 265 135 60 170 125,0 4 145 124

Blok no. A B C1 C2 D1 D2 F G H

mm mm mm mm mm mm mm mm mm K 370 40 10 140 100 17 78 47,0 12 22K 400 40 10 140 100 17 78 47,0 12 22K 500 40 10 140 100 17 78 47,0 12 22K 600 50 12 190 140 21 105 62,5 15 25K 650 50 12 190 140 21 105 62,5 15 25K 800 50 15 190 140 21 105 62,5 15 35K 1000 50 15 190 140 21 124 70,5 16,5 35

1.

1.

Lockplate w/bolts

Stainless steel

K19A


370-1

D E G J S Weight

•KL Available only with ball bearing. *KL 2-004

*KL 500-2 Available only with rollerbearing.

*KL 600-2

*KL 650-2


1

0




’G’ Galvanized.


Blok vare nr. Block part no. A B B 1

Pasteca art. no.

mm mm mm mm mm mm mm mm kg

KL 130- 235 100 100 130 100 85 10 110 10,9KL 170- 300 100 100 170 130 125 10 115 20,4KL 215- 340 100 100 215 117 164 10 130 27,0KL 230- 390 120 120 230 135 175 12 140 43,5KL 300- 475 120 120 300 155 240 12 180 53,8•KL 370- 1 615 140 140 370 220 285 12 210 86,7*KL 400- 2 660 180 180 400 230 300 15 225 118,0*KL 500- 2 770 180 180 500 255 380 20 265 213,0*KL 600- 2 895 180 185 600 280 480 20 330 309,0*KL 650- 2 960 240 220 650 305 500 20 330 415,0

On order add letter, e.g. KL 230-1G.

BMM-Fairlead blocks

Blue painted

K20



mm mm mm mm Kg SK 130-1 100 130 60 25 5,50SK 170-1 100 170 60 25 11,70SK 215-1 100 215 80 35 18,30SK 230-1 120 230 80 35 19,50SK 300-1 120 300 80 35 29,80SK 370-1 140 370 100 45 50,50SK 400-2 180 400 140 60 85,00SK 500-2 180 500 170 70 130,00SK 600-2 180 600 170 70 150,00SK 650-2 240 650 170 70 240,00


mm mm mm mm Kg SK 130-0 100 130 37 25 5,50SK 170-0 100 170 37 25 12,00SK 215-0 100 215 56 35 18,00SK 230-0 120 230 56 38 20,10SK 300-0 120 300 56 38 30,70

SheavesBall bearing/Roller Bearing Bronze bushing

PinsBall bearing

Roller bearing

Bronze bushing




mm mm mm Kg PK 400-2 330 60 212 10,90PK 500-2 340 70 225 12,90PK 600-2 340 70 225 12,90PK 650-2 404 70 285 14,60


mm mm mm Kg PK 130-0 155 25 123 0,70PK 170-0 155 25 123 0,70PK 215-0 158 35 117 1,30PK 230-0 190 38 133 1,60PK 300-0 190 38 165 1,60

K20A


Blok vare nr. VægtBlock part no. SWL A B D E F F G I J WeightPasteca art. no. 5:1 Peso

Ton mm mm mm mm mm mm mm mm mm Kg KO 300-1 11,0 485 120 300 170 125 205 240 90 12 69,0KO 370-2 13,0 600 140 380 190 150 235 285 100 12 125,0KO 400-2 15,0 670 180 400 210 175 270 300 125 15 187,0KO 500-2 20,0 825 180 500 260 185 310 380 115 20 300,0

either Swivel eye.


or Swivel fork.


’C’ Tested with certificate. ’H’ Flame hardened sheave.

On order add letter, e.g. KO 300-1E H.

E

S

F

KO 300-1 Available only with ball bearing.

KO 370-2 KO 400-2 Available only with roller bearing.KO 500-2

Blue painted


BMM-Trawl blocks, openHead

K21



mm mm mm mm mm mm mm mm mm mm mm mm mm mm KO 300-1 48 105 38 203 140 29 52 84 35 175 43 58 50 125KO 370-2 58 110 50 220 165 39 70 103 50 215 51 72 60 145KO 400-2 58 110 50 225 195 51 85 115 65 260 51 72 60 145KO 500-2 75 140 50 280 195 51 85 115 65 260 58 80 70 160

Head


Sheaves


mm mm mm mm Kg SK 300-1 120 300 80 35 29,80SK 370-2 140 370 100 45 50,50SK 400-2 180 400 140 60 90,00SK 500-2 180 500 170 70 130,00


mm mm mm Kg PK 300-1 190 35 133 1,50PK 370-2 234 45 152 3,20


mm mm mm Kg PK 400-2 330 60 212 10,90PK 500-2 340 70 225 12,90

Pins

K21A


Netsonde Block

Nylon Sheave

Stainless steel

Vare nr. Part no. SWL A B C D F J M N O P Parte no.

KT300-NET 1,2 670 44 99 300 55 6 34 - 12 125

KT300-1-NET 4,0 790 44 99 300 45 10 40 42 22 125

KT500-1-NET 4,0 885 44 99 500 45 10 40 42 22 125

Vare nr. Vægt Part no. S T U Weight Parte no. Peso

KT300-NET 75 470 130 8,0

KT300-1-NET 75 470 250 22,0

KT500-1-NET 75 470 250 33,0

“1”=

Ballbearing, greascable

K22


Blok vare nr. VægtBlock part no. SWL A B C D WeightPasteca art. no. 5:1 Peso

Ton mm mm mm mm Kg KA 050-ORG 1,0 190 50 55 75 2,5

Blok vare nr. VægtBlock part no. SWL A B C D WeightPasteca art. no. 5:1 Peso

Ton mm mm mm mm Kg KA 100-ORG 2,0 280 100 85 75 4,8KA 150-ORG 3,0 350 150 100 100 11,0

Galvanized

Bronze bushing, greaseable

BMM-Lazy line block

K23


Vare nr. f/wire VægtPart no. SWL A B C D E F G f/wire WeightParte no. 5:1 p/cable Peso

Ton mm mm mm mm mm mm mm mm Kg KPBW09- R 9,0 510 70 66 235 85 55 185 19-25 37,0KPBW12- R 12,0 680 90 90 350 95 60 240 22-28 82,0

BMM-Opensided block

Blue painted


either Rollerbearing, greaseable.2

either Bronz bushing, greaseable.

0

Open with firm eye and safety latch

K24


Vare nr. Vægt max. wirePart no. tegn D B G R S WeightParte no. Peso

mm mm mm mm mm mm kg SKT 1-1 1 83 22 70 47 17 0,60 16SKT 1-0-30 1 83 30 65 32 20 0,85 24SKT 1-0 1 83 22 70 27 20 0,75 16SKT 1-1SS 1 80 22 70 47 17 0,60 16SKT 1N 1 83 22 70 17 0,15 16SKT 2-1 1 110 24 96 52 20 1,25 18SKT 2-0-30 1 110 30 91 36 25 1,50 24SKT 2-0 1 110 24 96 36 25 1,30 18SKT 2-1SS 1 110 24 96 52 20 1,25 18SKT 2N 1 110 24 96 20 0,25 18SKT 3-1 1 150 28 133 47 20 2,65 20SKT 3-0 1 150 28 133 36 25 2,60 20SKT 3N 1 150 28 133 25 0,55 20SKT 4-1 1 185 35 160 62 30 5,10 22SKT 4-1-42 1 185 42 160 62 30 5,60 22SKT 4-0 1 185 35 160 41 30 5,20 22SKT 4N-1 1 185 35 160 62 30 1,13 22SKT 6-1 1 210 42 188 76 30 7,70 24SKT 6-0 1 210 42 188 41 30 7,60 24SKT 230-1 1 230 57 195 80 35 12,80 28SKT 230-2 1 230 57 195 80 35 12,80 28SKT 300-1 1 300 66 260 100 45 18,20 28SKT 300-2 1 300 66 260 100 45 18,20 28SKT 400-2 1 400 70 345 120 60 35,00 28SKTV 500-2 1 515 76 445 140 65 42,50 30SKS 10-0 2 83 45 58 27 20 1,50SKS 20-0 2 83 45 58 27 20 1,50SKS 30-0 2 110 45 82 27 20 2,30SKS 40-0 2 110 45 82 27 20 2,30SKS 50-0 2 150 60 114 36 25 5,70SKS 60-0 2 215 60 178 41 35 11,30SE 16-0 2 83 70 54 36 25 1,60SKA 50-0 2 80 52 61 27 20 1,50SKA 100-0 2 80 100 57 27 20 2,30SKA 150-0 2 100 150 81 36 25 7,20SKT 110-1 2 110 85 72 62 25 3,60SKT 110-0 2 110 85 72 36 25 3,80SKT 150-1 2 150 85 112 62 25 8,10SKT 150-0 2 150 85 112 36 25 8,20SKT 215-1 2 215 100 170 80 35 18,30SKT 215-0 2 215 100 170 56 35 18,50

On order add letter, e.g. SKT 300-2H.


Against extra charge are all sheaves available:

1. kuglelejer / ball bearing / rodamiento de bolas 2. rullejejer / roller bearing / radamiento de rodillos 0. bronzeleje / bronze bushing / cojinete de bronze N. nylon skive / nylon sheave / rueda de nylon SS. rustfri skive / stainless sheave / inoxidable rueda

BMM-SheavesTegn. 1 Tegn. 2

G

K25


Vare nr. VægtPart no. tegn D B B2 G R S WeightParte no. Peso

mm mm mm mm mm mm mm kg SK 130-1 3 130 100 100,0 85 62 25 5,50SK 130-0 3 130 100 100,0 85 36 25 5,70SK 170-1 3 170 100 100,0 125 62 25 11,70SK 170-0 3 170 100 100,0 125 36 25 12,00SK 215-1 3 215 100 102,2 164 80 35 18,30SK 215-0 3 215 100 100,0 164 56 35 18,50SK 230-1 3 230 120 121,1 170 80 35 19,50SK 230-0 3 230 120 120,3 170 56 38 20,10SK 240-1 3 240 150 152,0 170 80 35 24,00SK 240-0 3 240 150 170 56 38 24,00SK 300-1 3 300 120 121 240 80 35 29,80SK 300-0 3 300 120 120,6 240 56 38 30,70SK 370-1 3 370 140 143,9 285 100 45 50,50SK 370-2 3 370 140 145,0 285 100 45 50,50SK 400-2 3 400 180 184,0 300 140 60 85,00SK 500-2 3 500 180 187,0 380 170 70 130,00SK 600-2 3 600 180 187,0 480 170 70 150,00SK 650-2 3 650 240 248,0 500 170 70 240,00SK 800-2 3 800 240 249,0 600 200 85 370,00SK 1000-2 3 1000 260 275,2 825 250 123 600,00

On order add letter, e.g. SK 500-2H.


Against extra charge are all sheaves available:

1. kuglelejer / ball bearing / rodamiento de bolas 2. rullejejer / roller bearing / radamiento de rodillos 0. bronzeleje / bronze bushing / cojinete de bronze N. nylon skive / nylon sheave / rueda de nylon SS. rustfri skive / stainless sheave / inoxidable rueda

BMM-Sheaves

G

Tegn. 3

K26


General recommendations and warnings using Blue Line blocks

Ratings in this catalogue are applicable only to new products.The safe working load (S.W.L.) or working load limit (W.L.L.) of each Blue Line-block may be affected by wear, misuse, overloading, corrosion, deformation, intentional alteration and other use conditions.

Working loads shown are the maximum load the block is authorized to support under normal environmental conditions, shock loading and abnormal conditions must be taken into account when selecting the blocks. Regular inspection must be conducted to ensure the equipment continues to meet the required standard.

Blue Line blocks generally are intended for tension or pull. Side-loading must be avoid-ed, as it excerts additional force or loading for which the product is not designed to accommodate.

Welding of or to load supporting parts or products can be hazardous. Knowledge of materials, heat-treatment and welding procedures is necessary for proper welding. The Blue Line should be consulted for information.

Maintenance of blocks

All blocks must be regularly inspected to monitor its condition. The frequency of inspec-tion depends upon frequency and period of block use as well as environmental condi-tions.When inspecting blocks for wear, check headfittings for deformation, cuts, sharp edges and any damage which may produce additional stress conditions.Check for excessive wear in pins, side plates, rope grooves, bushes and bearings. Check security of bolts, nuts and any other locking method and ensure that during con-tinuous usage cannot vibrate loose.Any crack or deformation of a block is sufficient to withdraw the equipment from ser-vice.

The frequency of lubrication depends on product use and environmental conditions. Upon request Blue Line will provide both lubrication type and frequency.Also available we have instructions on disassembling and assembling of blocks and sheaves.

Guidance

The design safety factor calculated relating the ultimate load to the working load gener-ally expressed as a ratio.S.W.L. (Safe Working Load) or W.W.L. (Working Load Limit) indicates the maximum mass or force which the product is authorized to support in a particular service.Throughout the catalogue safetyfactor 5:1 is used. Meaning: Ultimate load divided by 5 = S.W.L.

K27


The following examples will give you guidance when deciding what you need to lift or move a load:

Single fall: Double fall:

Resultant head load = 12,0 ton,i.e. plus 100% of load liftedLine pull = 6,0 tonLoad on beam = 12,0 ton

Load on blocks

The S.W.L. for Blue Line blocks indicate the maximum load that should be exerted on the block and its connecting fitting.This total load value may be different from the weight being lifted or pulled by a hoisting or a hauling system. It is necessary to determine the total load being imposed on each block in the system to properly determine the rated capacity block to be used.A single sheave block used to change load line direction can be subjected to total loads greatly different from the weight being lifted or pulled. The total load value varies with the angle between the incoming and departing lines to the block.The following chart indicates the factor to be multiplied by the line pull to obtain the total load on the block.

Resultant head load = 9,0 toni.e. plus 50% of load liftedLine pull = 3,0 tonLoad on beam = 9,0 ton

K28


Angle Factor Angle Factor

0° 2,00 100° 1,29 10° 1,99 110° 1,15 20° 1,97 120° 1,00 30° 1,93 130° 0,84 40° 1,87 135° 0,76 45° 1,84 140° 0,68 50° 1,81 150° 0,52 60° 1,73 160° 0,35 70° 1,64 170° 0,17 80° 1,53 180° 0,00 90° 1,41

Specially for trawlblocks

Regarding testing of trawlblocks.

Extract from the Norwegian Maritime Directorate's Rules (§13.1.2.):"For single sheave blocks with or without becket, the testload may be reduced in accor-dance with the above table when the resultant load in the headfitting exceeds 25 tonnes."

K29


up to and including 25 tonnes 2 x SWL« « « « 30 « 55 tonnes« « « « 35 « 65 «« « « « 40 « 70 «« « « « 45 « 75 «« « « « 50 « 85 «« « « « 55 « 90 «« « « « 60 « 95 «« « « « 65 « 100 «« « « « 70 « 110 «« « « « 75 « 115 «« « « « 80 « 120 «« « « « 85 « 125 «« « « « 90 « 130 «« « « « 95 « 135 «« « « « 100 « 145 «« « « « 110 « 155 «« « « « 120 « 165 «« « « « 130 « 175 «« « « « 140 « 190 «« « « « 150 « 200 «« « « « 160 « 215 «« « « « 170 « 230 «« « « « 180 « 240 « above « 180 « 1.33 x SWL

Relation between sheave/steel wire rope: When a steel wire rope is bended over a wiresheave tensions will occur. After repeatedly bendings fatigue will arise.Exactly when this fatigue will arise depends on the sheave diameter the steel wire rope is bended over.General recommendations is the sheave diameter (measured at the bottom of the groove) = "D" - should be 16-20 times the diameter of the wire = "Ø".

"D" = 16-20 x "Ø"

Also the groove at the bottom of the sheave has a big impact on the lifetime of the steel wire rope. The Blue Line recommends that the groove supports the steel wire rope at a minimum of 1/3 of the circumference (120 degrees).

Correct Wrong Wrong

K30


BMM blocks

Galvanized

Vare nr. VægtPart no. SWL A B C D E Ø MAX WeightParte no. WIRE Peso

Ton mm mm mm mm mm mm mm Kg KT 2- TG 2,0 251 24 22 110 135 20 18 3,1 KT 3- TG 3,0 320 28 31 150 160 23 20 6,4KT 4- TG 4,4 402 35 40 185 250 26 22 11,1 KT 6- TG 6,0 445 42 40 210 277 29 24 17,0





’B’ Becket.



1

0


E

Ø

A

A

B

K31


BMM blocks

Bronze bushing

Galvanized

Vare nr. VægtPart no. SWL A B D E F F1 G J K Ø MAX WeightParte no. WIRE Peso

Ton mm mm mm mm mm mm mm mm mm mm mm Kg KT 230- TG 6,0 485 57 230 150 110 168 195 8 287 29 28 29,0KT 300- TG 9,0 580 66 300 155 100 175 260 10 337 33 28 55,0


’B’ Becket.




K

Ø

A

J

D

E F1

G

F

B

K32

Rev

. 0

03

/200

9

EUROWIRE®

GALVANIZED STEEL WIRE ROPE 6 x 19 SEALE + FC/IWRC DUAL TENSILE (1570/1770 N/mm2)

6 x 19 S FIBER CORE

6 x 19 S STEEL CORE



Euronete

Steel Wire Ropes

L1

EUROWIRE®

GALVANIZED STEEL WIRE ROPE 6 x 26 WS DUAL TENSILE (1570/1770 N/mm2)

6 x 26 WS FIBER CORE

6 x 26 WS STEEL CORE



Euronete

Steel Wire Ropes

L2

EUROWIRE®

GALVANIZED STEEL WIRE ROPE 6 x 7 + FC/WSC (1770 N/mm2)

6 x 7 FIBER CORE

6 x 7 STEEL CORE



Euronete

Steel Wire Ropes

L3

EUROPACT®

GALVANIZED COMPACTED STEEL WIRE ROPE 6 x 19 SEALE + FC/IWRC DUAL TENSILE (1570/1770 N/mm2)

6 x 19 S FIBER CORE

6 x 19 S STEEL CORE



Euronete

Steel Wire Ropes

L4



Steel Wire Ropes

L5


6 x 26 WS FIBER CORE

6 x 26 WS STEEL CORE

EuroneteEUROPACT®



Steel Wire Ropes

L6

EuroneteTURBOWIRE®


3 x 31 WS

Documents

Tornet Catalog