MADE IN THE

USA

NORMA Pacific Australia | normagroup.com.au | 1300 CLAMPS

* Product not stocked in Australia. Available upon request.

*

*

Torca® TorcTite® Exhaust ClampsFeaturing reaction block technology design – invented by Torca – TorcTite exhaust clamps provide a tight, durable 360° seal that won’t crush pipes and ruin exhaust flow. Corrosion-resistant stainless steel provides superior strength and is compatible with pipes, flex and mufflers. Available in 3 configurations –

butt style, lap style and lap style with gasket.

Fast, Easy & Accurate Installation· Pre-assembled wideband design easily fits over slip joints

to connect exhaust system components

· No need to separate pipes or exhaust members before clamping

· Specific OEM & service designs

Maximum Efficiency· Ultimate performance under extreme conditions make

Torca TorcTite the OEM preferred choice

· Butt style joints allow for easy connection of two same diameter pipes

· Lap style joints allow for connection of overlapping pipes

· Lap style with gasket allows for connection of overlapping pipes and includes a temperature-resistant fiberglass gasket attached to the reaction block for improved leak performance

NORMA Pacific Australia74 Bazalgette Crescent, Dandenong South VIC 3175Phone: 1300 252 677 | Email: sales.au@normagroup.com | www.normagroup.com.au

Torca Torctite® With Aluminized Lap Style Joint - Cartons• Torctite Aluminized Lap Style Joint: Joint Available With Gasket | Aluminized Steel Pre-Formed Band With Step | High-Strength Plated Fasteners

GROUP TORCA

PART NUMBER ITEM NUMBERCLAMPING RANGE

(INCHES)CLAMPING RANGE

(MM)CARTON

QTYL20AB 03680108051 2.00” 50.8MM 50L22AB 03680105056 2.25” 57.1MM 50L25AB 03680116064 2.50” 63.5MM 50L27AB 03680105069 2.75” 69.8MM 50L30AB 03680121076 3.00” 76.2MM 50L35AB 03680115089 3.50” 88.9MM 50L40AB 03680111102 4.00” 101.6MM 50L45AB 03680113114 4.50” 114.3MM 50L50AB 03680131127 5.00” 127.0MM 50L60AB 03680114152 6.00” 152.4MM 50

Torca Torctite® With Stainless Steel Lap Style Joint - Cartons• Torctite 304 SS Lap Style Joint: Joint Available With Gasket | 304 Stainless Steel Pre-Formed Band With Step | 304 Stainless Steel Polished Finish Available

GROUP TORCA

PART NUMBER ITEM NUMBERCLAMPING RANGE

(INCHES)CLAMPING RANGE

(MM)CARTON

QTYL20SB 03680112051 2.00” 50.8MM 50L22SB 03680105057 2.25” 57.1MM 50L25SB 03680111064 2.50” 63.5MM 50L27SB 03680103070 2.75” 69.8MM 50L30SB 03680110076 3.00” 76.2MM 50

« L35SB 03680108089 3.50” 88.9MM 50L40SB 03680124102 4.00” 101.6MM 50L45SB 03680110114 4.50” 114.3MM 50L50SB 03680117127 5.00” 127.0MM 50L60SB 03680120152 6.00” 152.4MM 50

Torca Torctite® With Aluminized Butt Style Joint - Cartons• Torctite Aluminized Butt Style Joint: Joint Available With Gasket | Aluminized Steel Pre-Formed Band With Step | High-Strength Plated Fasteners

GROUP TORCA

PART NUMBER ITEM NUMBERCLAMPING RANGE

(INCHES)CLAMPING RANGE

(MM)CARTON

QTYB20AB 03680303051 2.00” 50.8MM 50B22AB 03680300056 2.25” 57.1MM 50B25AB 03680303064 2.50” 63.5MM 50B27AB 03680302069 2.75” 69.8MM 50B30AB 03680307076 3.00” 76.2MM 50B35AB 03680306089 3.50” 88.9MM 50B40AB 03680305102 4.00” 101.6MM 50B45AB 03680303114 4.50” 114.3MM 50B50AB 03680305127 5.00” 127.0MM 50B60AB 03680302152 6.00” 152.4MM 50

Torca Torctite® With Stainless Steel Butt Style Joint - Cartons• Torctite 304 SS Butt Style Joint: Reaction Block Technology | 304 Stainless Steel Pre-Formed Band With Step | High-Strength Plated Fasteners

GROUP TORCA

PART NUMBER ITEM NUMBERCLAMPING RANGE

(INCHES)CLAMPING RANGE

(MM)CARTON

QTYB20SB 03680306051 2.00” 50.8MM 50B25SB 03680301064 2.50” 63.5MM 50B30SB 03680306076 3.00” 76.2MM 50B35SB 03680301089 3.50” 88.9MM 50B40SB 03680301102 4.00” 101.6MM 50B45SB 03680306114 4.50” 114.3MM 50B50SB 03680302127 5.00” 127.0MM 50B60SB 03680306152 6.00” 152.4MM 50

| Superior clamp load capacity

| Pre-assembled

| Aluminized and 304 stainless steels

| Diameter range: 2" – 6"

Torca® TorcTite® Exhaust Clamps

Durable clamping performance for pipes, exhaust and mufflers.

« LEAD TIMES MAY APPLY.