Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
Topsun's Crystalline Photovoltaic Modules are manufactured under Integrated
Management System (ISO 9K: ISO 14K: BS 18K) for quality and safety environment.
Offers high efficiency modules with consistent performance, quality workmanship and
AR coated antimony free glass material. High power modules precisely manufactured to
achieve better module conversion efficiency in the industry. Environmental friendly
product confirming to RoHS standards.
Certifications :
Features :
•
•
•
•
•
•
•
•
•
4BB/5BB Modules
Micro cracks free -100% EL inspected
AR coated glass for better positive tolerance
RoHS and CE certified
Better Performance in Low irradiance
Linear degradation as per Industry standard
Best suited for Grid Tied applications
Better performance at higher Temperature.
Mono Crystalline
Topsun Energy Ltd.325W to 340W in 72 Cells
High Performance Crystalline Photovoltaic Modules
www.topsunenergy.com
•
•
•
•
•
IEC 61215: 2005 Ed 2.0
IEC 61730-1: 2013 Ed 1.2/IEC 61730-1: 2007
IEC 61730-2: 2012 Ed 1.1/IEC 61730-2: 2007
CE & RoHS Compliance
ISO 9001, ISO 14001 & OHSAS 18001 Certified
Organization
B-101, GIDC, Electronics Zone, Sector-25, Gandhinagar- 382 028, Gujarat, India. Phone/Fax: +91 79 23288804, 23288805.Email: [email protected], Website: www.topsunenergy.com.
Our Valued Partner
Typical Electrical Characteristics at STCIV parameters are tested at STC (Irradiance of 1000W/m², AM 1.5G and Temperature 25ºC)
Topsun Energy Ltd.
NOCT
Pmp
Isc
Imp
Temperature Co-efficients
0.05
0.03
ºC
%/ºC-0.40
45±2
Each Pallet
20 Ft Container
40 Ft /40Ft HC Container
Packing Configuration
528 Modules
264 Modules
22 Modules
%/ºC
%/ºC
Voc
Vmp
-0.33
-0.40
%/ºC
%/ºC
Operating Temperature
Current/voltage dependence on irradiance and module temperature.These I-V curves indicate the effect of temperature and light intensity on module Performance.
2 O 1000 W/m at 50 C
2 O 1000 W/m at 25 C
2 O 800 W/m at 25 C
2 O 600 W/m at 25 C
2 O 400 W/m at 25 C
2 O 200 W/m at 25 C
Voltage (V)
Cu
rren
t (A
)
10.0
8.0
6.0
4.0
2.0
0.0 10.0 20.0 30.0 40.0 50.0
Typical IV Curves
Dimensions:
NOTE: The data presented may change due to further improvements in the product.
Refer Installation, Operation & Maintenance
manual before use and operation of the product
System Design
Series Fuse Rating (Recommended): 15A
Maximum System Voltage: 1000 VDC
Static Load: 5400 Pa (113 Psf)
Module Dimension: 1961 x 991 x 40 mm
Module Weight: 22.50 kg (50.6 Lbs)
ºC-40 to +85
325W 325.00 38.00 8.55 45.75 9.10 16.72
330W 330.00 38.25 8.63 46.00 9.17 16.98
335W 335.00 38.50 8.70 46.25 9.21 17.23
340W 340.00 38.75 8.80 46.50 9.25 17.49
Model/Type (Pmax) (Vmp) (Imp) (Voc) (Isc) Eff (%)
Compliance of Simulator readings with an accuracy of class AAA (±2%)
Typical Electrical Characteristics at NOCTIV parameters are tested at NOCT (Irradiance of 800W/m²,Temp at NOCT)
Model/Type (Pmax) (Vmp) (Imp) (Voc) (Isc)
325 W 235.75 34.26 6.88 41.88 7.35
330 W 239.52 34.50 6.95 42.10 7.41
335 W 243.05 34.71 7.00 42.33 7.44
340 W 247.43 34.94 7.49 42.56 7.49
40.0
30.0
1961.00
991.00
600.00
200.00
200.00
480.50
480.50
12.00
962.00
Ø4.00
Mounting Hole 7x12mm x 8nos.
30.00
Q.C.PASS LABEL Q.C
TESTED OK LABEL
REAL-LABEL
4 Sq mm Cable, 1.25Mtr Lengthwith MC4 Connectors
- +
J.B
All Dimensions are in MM.
Tolerance are±2MM