TopconCatalogueIEV11

8/3/2019 TopconCatalogueIEV11

1/40

Sales ~ Hire ~ Repair ~ TrainingSales ~ Hire ~ Repair ~ TrainingSales ~ Hire ~ Repair ~ Training

Leading The WayTopcon is one of Irelands leading providers of surveying and construction equipmentsolutions. With 25 staff operating from our two locations in Dublin and Antrim, ourprincipal activities revolve around the hire, sale and repair of surveying equipment tocustomers throughout Ireland.

The recent history of Topcon Ireland is a story of a company that has grown throughinvestment and dedication by its long standing workforce, a company that hasprospered through being innovative, knowledgeable and passionate about helpingcustomers thrive in a changing world. Topcon believe in progress, growth andsustainability, our aim is to build long-term relationships with our customers ensuringwe make their lives and businesses better by providing expert advice and equipmenttailored to their needs. In an industry full of competition, Topcon are thriving by beingthe best at what we do helping you make the right choice, for you.

Topcon CorpAn integral part of Topcons success is our strength of product. As a world leadingmanufacturer of surveying and construction equipment, Topcon give you access to

the latest innovative product solutions available.Established in 1932 in Japan, Topcon Corporation today is the worlds largestcompany focused on positioning control and machine control products, software, andapplications for the civil engineering and construction industries with majormanufacturing and research facilities across Japan, China, the U.S.A. and Europe.Topcon lead the market forward with each new innovative product, in the 70s Topconinvented the first integrated Total Station, in the 80s Topconsintroduction of the GTS-3 series brought the first electronic Total Station to themarket. Setting standards for robustness and waterproofing, Topcon offered the

worlds first Scanning Laser, Integrated Machine Control, Modern Total Station, GPSSystem and more.

Topcon Ireland DistributorsTopcon have set up an extensive distribution network throughout Ireland, workingclosely with Hire-shops and Plant Companies located all over the country.These approved distributors can offer the same high quality service and productsyou would expect from Topcon. To locate your nearest distributor, pleasecontact our office on 01-8975900 or 028-79659299.


2/40


3/40

E q u

i p m e n

t H i r e

01-8975903 Dublin 028-79659299 Toome

Call NowCall NowCall Now

Topcon Northern Ireland Tel: 028 79659299 Email: [email protected] Web: www.topconni.co.uk

GREAT RATES

ALL EQUIPMENT FULLY CHECKED & CERTIFIED

NEXT-DAY NATIONWIDE DELIVERY

PHONE SUPPORT AVAILABLE

TOTAL STATIONS

LEVELS

LASERS

PIPE LASERSMACHINE CONTROL

GPS SYSTEMS


4/40

Its Time

This series offers wide range of automatic levels for the land surveyor,civil engineer and contractor. Most levels use thin copper wire tapes tosuspend the automatic levelling system (compensator), this works welluntil the level suffers from an impact, then the tapes stretch or snap

making the level inoperable. The repair cost for this can equal the costfor a new level, however, all AT-G series levels feature a magnetically-dampened compensator hung by four special mylar ribbons havingsuperior resistance to cold, heat and shock.

All AT-G models are highly water resistant with a nitrogen gas sealedtelescope which prevents clouding and moisture on the lens.

O

L v

AT-G Series Features:- Dry Nitrogen gas sealed telescope- Water tight construction to IPx7, no lens clouding, reliable

- Magnetically damped Topcon compensator for accuracy and durability- Concave base for quick set up on dome head tripods- Short minimum focus distance (0.5m)- Dual side clamp-free fine horizontal adjustment- Robust construction for daily site use- High quality optics

Product information:The AT-G6 superseded the older AT-G7 in late 2006, offeringhigher accuracy at a lower price than its predecessor. TheAT- G6 represents outstanding value for money with Topconsunrivalled optics and high quality build at an amazingly lowprice.

24x Magnification

Accuracy 2.0mm over 1km

Two year guarantee

Topcon AT-G Series Levels

Product information:Features AT-G series standard magnetically-dampenedcompensator hung by four special mylar ribbons which givesuperior resistance to cold, heat and shock.The AT-G4 is the tough, accurate and reliable choice for theengineer who needs an optical level that gives the best resultsevery time.

26x Magnification


Two year guarantee

4

Topcon AT-G6 Builders Auto Level

Topcon AT-G4 Engineers Auto Level

Comes withTripod & Staff

Topcon Ireland Tel: 01 8975900 Email: [email protected] Web: www.topcon.ie


5/40

www.topcon.ie

O p

t i c a

l L e v e l s

Product information: The AT-G1 model features a 360 glass horizontal circle usinga 25x magnification microscope to read the circle for precise

horizontal angles, while the AT-G2 has a standard 360horizontal circle. All models are waterproof with a nitrogen gassealed telescope which prevents clouding and moisture on thelens.

AT-G1:32x MagnificationAccuracy 0.7mm over 1km

AT-G2:32x Magnification


Topcons DL -101C/102C take accuracy and ease of operation to a higher level with its AdvancedImage Processing Technology. The outstanding features make the DL-101C ideal for highprecision applications including the performance of 1st and 2nd order levelling and deformation

monitoring.- 32x Magnification - 0.4mm Electronic reading- 1mm Optical reading - 0.01mm/.1mm Least count

Topcon DL101C & DL-102C Digital Levels

Topcon AT-G1 & G2 Precise Levels

Product information:With two levels of accuracy (0.4mm/1.0mm), Topcon's DL-101C and DL-102C Digital Levels increase speed, accuracyand productivity in the field. Both levels store data internallyor to a memory card through the standard PCMCIA slot. Theinternal memory is 256K and up to 8,000 points can be stored

in memory. A data collector can also be connected to the DLSeries RS232 port for differential levelling. Processing soft-ware that includes a high precision least squares adjustmentroutine is also available. Enhanced features of the DL seriessoftware include Inverted Rod Readings, Compatibility withSTAR * LEVEL Software and User Defined Point Numbers.

05

Highly Accurate Measurements The fully automatic measuring ability and digital display of the DL-101C/102C excludes anyreading errors, writing mistakes in the field book, and other possible human-made errors.Consequently, the electronic measurement data is always more precise and more reliable ascompared to the conventional visual measurement.

Faster Automatic Measurement When used with Topcons unique patterned staff, height and distance can be automaticallydetermined digitally by the DL- 101C/102C. Since its a fully automatic electronic measurement,there is no need to make an optical reading! You just sight the staff, focus, and press the

measurement button. Its that simple! The results appear in the clearly visible display windowafter about four seconds.



6/40

6

R

ngL

L

v

5 Year GuaranteeFeature Packed

Economical PriceBest Technology

5 Year Laser Guarantee Topcon understand that every second you cant use your professional equipment is a second lost!

Thats why we guarantee to solve any problem, swiftly and withoutrestrictions.

For the next five years you will be safe in the knowledge thatTopcon takes care of you and your instrument.

Topcon distributors are located trough out Ireland. For details ofyour local Topcon Laser distributor , or for any further information onspecifications, please phone our experienced staff who are eager tohelp. Topcon Team onTopcon Team onTopcon Team on 01 897590001 897590001 8975900

Its Time

Laser ProductsLaser ProductsLaser Products

Its Time you experiencedTopcon Quality.....



7/40


8/40

Its Time

Features:- 700m operating range- Heavy duty build withstands site bangs and bumps- Highly water and dust resistant to IP56 standard- Simple one button operation- Rechargeable as standard- Accuracy 8 arc seconds- Ultra fast self levelling motors

Comes With:- 5 year guarantee- LS-80A SmartReceiver & bracket- Hard carry case- Operating manual

Product Information:The RL-H3A takes rotating lasers to the next level with its long range and high accuracy. TheRL-H3A kit comes with an LS-80A SmartReceiver as standard offering a dual sided digital

readout and 11 level beam finder giving precision levelling accuracy.

8

Topcon LS-80B Laser ReceiverThe Topcon LS-80B laser receiver allows a single crew-

member to quickly and accurately finish a range of jobsfrom sub-base levelling to concrete finishing. This rugged,accurate tool is water and dust resistant and can be usedwith most conventional rotating lasers. Securely attachedto a levelling stave with a holder 6 bracket, the sensorfeatures a large digital readout and an audible tone whichgives levelling indication, out of range and low battery.

Topcon LS- 80A SmartReciever The LS-80A SmartReciever has all the features of the 80B along with many added benefits.The LS-80A features a dual sided readout enabling the user to take readings from the front orthe rear of the sensor. This durable site ready receiver also has a quick beam finding systemwith 5 grade channels giving outstanding precision accuracy .

R

Topcon RL-H3A Long Range Laser Level

Topcon LS-80 Universal Laser Receivers

Advance beyond the competitionAdvanced laser technology, high precision and reliability are the qualities which have made theRL-H3A an instrument of choice for many professionals across the U.K.s construction job sites.Benefits for the constructors are; Faster levelling operations, Higher accuracy, and manpowersaving.

Accuracy VS DurabilityOne problem faced with having a high accuracy instrument is that durability can becompromised. Topcon has developed the only proven solution, liquid compensation. Liquid is farsuperior to pendulums in dampening the effects of vibrations. It gives you a stable, reliable, andabove all, highly accurate beam for daily dawn to dusk performance.



9/40

RL-100 1S Single slope display Choose from two models, RL-100 1S single slope, or RL-100 2S dualslope. The RL-100 1S provides single slopes from 5% to up to +25% in Xor Y axis and comes complete with Topcons new LS -80B laser receiver,sensor holder, and batteries. Everything you need to get right to work .

www.topcon.ie

Product information: Topcons RL -100 Series revolutionary encoding system providesthe highest grade repeatability, 5 arc seconds, of any other laser!No one even comes close. Setup-after-setup, time-after-time,youre always right on grade!

09

RL-100 Features:- 770m operating range- 5 arc second grade repeatability- Electronic beam masking- Highly weather resistant- 300m range RC400 remote (RL-100 2S only)- Rechargeable as standard with 120hrs use- LS-80B receiver & bracket- 5 year guarantee

- Machine control compatible

A new standard in high accuracy,high value slope lasers

RL-100 2S Dual slope display The RL-100 2S provides dual slopes up of +/-10% in single slope orup to an industry leading +/-25% dual slope. The RL-100 2S standardpackage includes the LS-80B laser sensor, sensor holder, batteries,plus the all-new RC-400 remote that allows complete control of the

RL-100 2S up to 300m away!

RL-100 menu display The illuminated menu display shows:- Masking electronic shutters up to three quadrants avoid interference

with other lasers on site- 300, 600 or 900rpm selectable rotation speed- Selectable remote control channels- Sensitivity selector for strong winds or calm conditions- Hi-alert indicates if the laser has been disturbed preventing

inaccuracies

The new RC400 & LS-80B sensor with bracket:

G r a

d e

L a s e r

L e v e

l s

Topcon RL-100 Series Grade Lasers



10/40


11/40


12/40

Its Time

Product information:The easy-to-use LS-B2 is designed to boost machine production so yourbusiness always maintains a leading edge over the competition. It features

four selectable on-grade band widths - from rough grade to super fine grade- to suit your job. The versatile LS-B2 works easily with any machine so youonly need one receiver for any job. Whether mounted on a grader or dozerfor levelling or an excavator for digging, the LS- B2s quick release clampallows simple setup from one machine to another.

Features:- Bright LEDs adjust to ambient light - Cordless operation- Indicate or automatic control - Quick release clamp- Alkaline or rechargeable battery option - Selectable on-grade accuracy

2

As part of an integrated machine control system, the LS- B100 cant bebeat for accurate, one- person control. Using a laser as its reference,

the LS-B100 visually provides the machine operator the gradeinformation needed for continuous work, freeing the grade checker towork elsewhere.

Because the LS-B100 provides grade information to operators as theywork, their results are far more accurate. That accuracy means fewerpasses to reach grade and fewer mistakes to bury, which translates intomaterial savings and increased production.

Make your job easier and more productive!

M

h n

Cn

Topcon LS-B2 360 Machine Sensor

Topcon LS-B100 Series Machine Sensor


A new series of high-quality, affordable machine control sensors - theLS-B100 series - was recently announced by Topcon. The LS-B100series, including the LS-B100, LS-B110 and 110W (wireless), offers amodern new design and increased functionality.

The new LS-B100 series provides the tightest accuracy and largestworking range of machine control receivers in the market today.The LS-B100 series is ideal for dozers, box blades, excavators andbackhoes. The LS- B100 receivers unique features, such as on -gradematching and wireless capability, offer unmatched performance on any

job site.

Features:- Most accurate receiving resolution - Large working range- Wireless display capability - On-grade matching function

- Alkaline or rechargeable battery option - Four selectable dead bands- Plumb indication - CAN compatible- Universal pole clamp - Tough site-proof design


13/40

www.topcon.ie 13

M a c

h i n e

C o n t r o

l


Product information:Topcon has long set the standard of accuracy, durability and affordability in machine control andthe automation of construction equipment. All Topcon machine control products are scalable andupgradeable. Regardless of the type of hardware you use, Topcon can provide you with a ma-

chine control product that will increase your equipments efficiency, accuracy and reduce fuelcost, set up time and down time significantly.

2D Dozer Laser Grade Solution

Automated Machine Control

Product Information:Topcons 2D dozer laser systems represents a market leader in automated machine controlproducts. The system v laser control platform offers a fully upgradeable solution to Topconsindustry leading 3DMC GPS+, mmGPS and LPS dozer systems.

Features:- Upgradeable to GPS- Reliable, ruggedized components- Environmentally friendly- Reduce fuel consumption- Increase productivity- Telescopic or static masts - Quick hydraulic response- Easy to use- Eliminate over cutting and material

usage saving money & time

Product Information:This fully automatic laser grade control system will help you reduce work load when preparingmaterial at formation level.

2D Grading Box Solution

Topcons 2D dozer laser systems represents a market leader in automated machine controlproducts. The system v laser control platform offers a fully upgradeable solution to Topconsindustry leading 3DMC GPS+, mmGPS and LPS dozer systems.

Features:

- Very accurate & quick hydraulic response- Fully operational from within the tractor- Easy to use

- Mechanically & hydraulically controlled door

- Significantly reduces duration of the job- Increases productivity- Durable solid construction


14/40

Its Time 4

M

h n

Cn

3D Dozer GPS+ Control


3D GPS+ control ties in with Topcons 2D laser control systems. All Topcon machine controlsolutions are back and fourth upgradeable. Topcons 3D systems are interfaced with the samesoftware, excavators, dozers, motorgraders, pavers and even survey crews all work with thesame user friendly software.

Topcons 3D GPS+ Machine Control Solutions

Product information:The 3D dozer GPS+ system gives you the edge in managing and controlling the job all fromwithin the cab of the dozer. This reliable consistent system has proven itself to be the ultimateplatform for complete automatic dozer control.

Features:- Automatically controlled- Uses both GPS & GLONASS- Very accurate- Very user friendly- In turn reduces fuel consumption- Calculate slope, elevation & direction automatically- Reduces the amount of passes needed to reach

the correct grade

3D Dozer & MotorGrader LPS Control

Product Information:The LPS machine control solution givesyou an extra option to accurately

controlling the job with a very powerfulsurveying tool the GPT-9000 RoboticTotal Station. Here you have a robotictotal station guiding your dozer or graderto extremely accurate results.

Features:- Very user friendly- Total station accuracy- Complete automatic control

- Control grade elevation and speed- Very efficient, very reliable- Use the robotic for controlling the machines & for the survey crews

3D GPS+ is not only accurate to plus or minus 3.5cm, but it's also an incredible time saver!Because it uses System Five's valve control, it's fully automatic without installing extracomponents. There's virtually no staking or re-staking required because 3D GPS+ works right

from site plans and satellite positioning data. And unlike laser control, 3D GPS+ allows the use ofmultiple machines even on hills, with just a single base station. Plus, you're free to move far fromthe base station and still receive grade corrections via the radio. No headaches! Just fast,automatic grade control!


15/40

www.topcon.ie 15

M

a c

h i n e

C o n t r o

l


Product Information:The 2DXE aided by the LS-B10W and laser puts the ability to grade very accurately at theoperators finger tips. With the power to watch your bucket on screen cutting to the actual gradeallows you to work in deep blind situations and even under water. 2DXI using the upgradeable

GX-60 box can be upgraded to 3DXI GPS+ control giving you the advantage of been able tomove forward when ready.

2DXI / 2DXE Excavator Indicate Systems

Features:- Work from the cab creating slopes, elevation

reference or laser- 4 sensors accounting for all movement- 5 inch digital display with lightbar- Easy to use- 2DXi Upgradeable- Eliminates over cut making

material pricing more accurate

Pick a reference2D gives you the flexibility to use a wide array of references to work from:existing surface, a point, a previous cut, or a rotating laser. Its as simple aschoosing your reference and entering a cut and/or slope depth.

3D Excavator Machine Control

Features:- Topcons 3DXI system will get you to the grade faster - GX-60 control box is touch screen- Large colour graphic display- Cut grade fast & accurate, the first time- Multiple views on screen- Eliminates stake out & checking

- Uses both GPS & GLONASS- Used on road construction, landfill slopes, underwaterapplication and earth moving

Product Information:The machine control product brings GPS+ control to yourexcavator. It allows you to monitor the machines exactposition on the site and the buckets position at all times.Knowing and seeing this information on the displaybox allows you to work away confidently knowing youreliminating over excavation and your not over usingmaterial.

Topcons 3DXi consists of two GPS+ antenna, four 360 tilt sensors that measure the angles

between the cab, boom, stick and bucket, a GPS+ receiver and Topcons GX -60 colour, touchsensitive control box. You can set up to six different bucket sizes. Need to change bucketsduring the job? - no problem. Simply the new bucket and select it on the control box.


16/40

Its Time 6

M

h n

Cn

Precision Agricultural Systems


Product Information:Topcons precision AG systems the PCS-100 lightbarguidance is setting a new standard for innovative agriculturetechnology. With a clever 5 high visibility colour display thePCS-100 is easy to use and sturdy enough to with stand toughfarming conditions. The PCS-100 allows you to map a fieldgiving you the area, distance travelled, area remaining andarea covered. All this information can be stored anddownloaded through the USB port printed out and handed tothe client.

Features:- Calculate area - Various guidance patterns ( follow last curve, A B lines & pivots) - Interchangeable field views ( overhead plan & path view ) - Lightbar guidance - Shows overlap & underlay - Simple operation

Complete Precision AG System

Product Information:The most advanced control box in agricultural technology.The X-20 system can control everything from standardguidance, auto steer, control mapping, auto sectioning control,variable rate control, planting, spraying, spreading andfertilizing.

Auto sectioning control is compatible with existing non displaycontrollers. With a large highly visible colour touch screenallows the controller to monitor the product been applied.

This very intuitive and user friendly control box with the efficiency of in-cab control and with allthe extra multiple functions leaves you with a tireless job.


17/40

www.topcon.ie

Please call for more information on our GreenBeam range

Features:- Worlds most accurate levelling and grade system- Survey accurate electronic encoder superior at any grade- Reduces rework

- Waterproof depth at least 5m for 24 hours- Cable free operation with convenient 6 hour quick charge- RC-200 infrared remote gives the user complete control, without being in the hole- Built for tough in the trench conditions with cast aluminium housing - 5 year guarantee

Product information:Topcons TP -L4 series of alignment lasers offer a combination of features and technology thatare proven to meet the demands of contractors more than any other alignment lasers on themarket. There are a number of models to choose from including conventional red beam lasersor our advanced Greenbeam laser range.

Your solution to guarantee youll get from here to there, quickly, accurately

and affordably

Want to go green?Topcon also offer two green beam models with many advancedfeatures including the one person automatic alignment feature,SmartLine and a beam so bright its visible in direct sunlight.

Product information:The Topcon DT-209P is an electronic theodolite that integrates thelatest electronic and optical technology. Fully water and dustproof (IP66) the DT-209P will keep working when you need it to,with its compact design adding easy portability. The DT-209P isdesigned for use by anyone on the construction site with minimalinstruction and features a quick centering shifting base tribrachfor quick and easy setup over the required point .

9 Accuracy (2, 5 & 7 available)

x26 Magnification

17

P i p e

L a s e r /

T h e o d o

l i t e

Topcon TP-L4 Series Pipe Lasers

Topcon DT-209P Digital Theodolite


The visibility of a Topcon Green Beam is four timesgreater than conventional red beams and its spot qualityis vastly superior to any red beam laser diode instrument.What does the added visibility mean to you? A visiblebeam is all you have, the easier you can see it, thequicker and more accurate your work will be which in turnwill increase your productivity.


18/40

Its Time 8

T

S

n

Technical Training & Support

For more information please email [email protected]

Topcon are now offering a number of cost effective

training solutions tailored to suit your requirements- whether you are after the basics or acomprehensive training day.

One to one or group courses

At your site/premises or at our facilities

Half or full days training available

Post training support available

We Work Around You...

Knowledge Is Power With technology moving faster than ever, its important to keep ahead of the

competition when it comes to saving time and costs whilst improving

productivity. Topcon offer a range of courses designed for total station andGPS users to help you get the most from your time on and off site.

Whether youve purchased new equipment or you have an older instrumentthat you need a refresher on, Topcon have dedicated staff that specialise intraining, sales and customer support of the high end equipment associated

with the more complex side of surveying and construction.Knowledge is power - be the best on site .

Work To Your Full Potential



19/40

19www.topconni.co.uk

T o

t a l S t a t i o n s

Features:- Economical, value priced measuring solution- Rugged, durable, water resistant design- 5 accuracy - Expanded full numeric keypad- On board programs & 24,000 point data storage- Ideal as a construction stakeout total station- Perfect when combined with FC field controller and software

Product information:The new Topcon GTS-105N series total station combines the traditionalTopcon rugged field-ready quality and accuracy with an economical,compact design that is perfect for everyday measuring and positioningapplications such as surveying and construction layout.

Topcon GTS-105N Total Station

Product information:The Topcon GTS-230N series are the innovative successor to the best selling GTS-210/220series total stations. The GTS-210 Series with waterproof design brought revolution to the

surveying industry with new features and durability. Now the new GTS-230N Series haveup-graded their basic functions for distance and angle measurement in addition to maintainingsuperb durability against the environment.

Features:- Tough waterproof construction (IP66) to keep you working- Expanded full numeric keypad- On board programs & 24,000 point data storage

- Full on-board surveying & stake out software- Superior basic function for measuring distance and angle- Perfect when combined with FC field controller and software

Easy to useThe layout of keyboard and display are clear and ensure easyoperation. The GTS-230 series features full functional surveying andstake out software, which is designed to be easy to learn andintuitive. The on-board software comprises a full range of surveyingand setting out routines.

Topcon GTS-230N Series Total Station

Superior Basic Function for measuring distance & angleThe GTS-230N Series are provided with a distance measuring range of 3,000m (9,900ft) to a sin-gle prism which is superior in their class (GTS-239N: 2,000m (6,600ft)/1 prism), while maintaininghigh accuracy (2mm+ 2ppmxD) m.s.e.(GTS-239N: (3mm+3ppmxD) m.s.e.). As for distancemeasuring time, data updates at a high rate speed of 1.2 seconds in the fine measurement mode.(0.7 seconds in the coarse mode, and 0.4 seconds in the tracking mode). This shorter distancemeasurement time will allow you to increase your efficiency and productivity in the field.



20/40

Its Time

Product information:The new GPT- 3100N recently replaced Topcons longstanding GPT-3000N series. This latest release has manytechnological advances including a new laser for non-prismdistance measurement which offers a major leap forward inperformance in a construction site surveying Total Station.

Four models of different angle accuracy specification areavailable, 2, 3, 5 and 7, all but the 7 model having a dualaxis compensator.

Longest reflectorless range Up to 350m, the longest reflectorless range in its class!Measures up to 3000m with a prism. The dual optical designallows you the extended range using a class 1 laser- safe forall conditions, making it ideal for use in high-traffic and otherheavily populated areas.

The new Topcon GPT-3100N series Reflectorless Total Station - a breakthrough in non-prism measuring

Precise pulse-laser reflectorless Topcons pulse -laser time -of-flight system eliminates measuringerrors caused by the overlapping signals used in phase measuringsystems. Accurately measuring corners or through objects such as achainlink fence is always fast and reliable.

When collimating point A, the pulse laser will output to point Aand point B at the same time, filtering out unnecessary signals.

Applications The features and software of the GPT-3100 series combine to provide ultimate flexibility in manyfield applications such as city elevation work, forestry survey, quarry surveys, mining surveysand accident investigation.

Please call for more information and prices on the complete GPT-3100N Range

0

Improved specificationsThe new Multi -pulse laser system uses multiple pulsed laser beams emitted at a constantfrequency, to measure distance. It offers increased measurement performance with pin-pointmeasurement beam, extended range, improved accuracy and lower power consumption.

Ad v

nd T

S

n

Topcon GPT-3100N Reflectorless Total Station



21/40

www.topcon.ie

Please call for more information and prices on the complete GPT-7500 range

Product information:The GPT-7000 series Total Station brought the advantages ofthe GUI (Graphical User Interface) to a total station by adopting

the latest Windows CE technology. Whether you are anexperienced user or just a beginner, the graphical interface andintuitive design allowed quick and easy set-up. Now Topconhave unveiled the successor to this innovative total station withthe release of the new GPT-7500 series.

21

The most advanced technology available for the professional surveyor

Powerful? How about the 400MHz Intel processor runningWindows CE, or the unprecedented 2000 metre non-prism range.That is 4 times longer than some competitors. And the on-boardTopSURV software quickly and easily guides you through themost demanding field applications.

Available in 1, 3, or 5 accuracy models, theGPT-7500 can fit any job requirement without breakingyour budget. The 1 and 3 versions have dual displays,while the 5 versions sport a single display. PrismRange to a single prism is 3,000 metres for all modelsexcept the GPT-7505, which is 2000 metres.

TopSURV onboard- Expanded import and export for CAD packages- Exclusive enhanced right mouse support- Multiple layer selection- Exclusive Topo grid function- Improved digital level support

Connected- Expand on-board memory or move files using Compact Flash

- Use the mini USB port to connect to activesync- Upload or download data directly to a PC in the field or officeusing the USB A port

Work the way you wantThe GPT-7500 models have an external data port for usewith external data collectors from Topcon and other thirdparties. The On-board Windows CE system allows other

third party software to be loaded on-board.

A d v a n c e

d T o

t a l S t a

t i o n s

Topcon GPT-7500 Windows CE Total Station



22/40

Its Time 2

The Topcon GPT-9000 series of robotic total station is the latest, most advanced system on themarket today that boasts a new modern design, faster motors, 2000 metre reflectorless range,and new X-TRAC prism tracking technology.

Please call for more information and prices on the complete GPT-9000A Range

The 9000 series robotic system features sophisti-cated technology unique to Topcon the one-touchquick lock feature that set the standard in Robotictarget acquisition has taken another step forward,with the sleek new RC-3 system.

Available in 1, 3, and 5 second angle accuracies, youcan select the instrument that is best suited to yourrequirements. All 9000 series robotic systems offer

reflectorless measurement superior to any otherinstrument available capable of precision measure-ments at a mind-boggling 2000 metres thats wellover a mile without a prism! Even though you maynever shoot that far, this technology has tremendousbenefits for every user.

With the new 2.4 GHz spread spectrum radio built into the 9000series, off board dedicated channel radios for remote operationare a thing of the past. A startling 1000m range between theinstrument and the controller mean that you will never have toworry about communications range between the components ofyour system.

A new, backlit keyboard provides a smart new user interface thatcombines efficiency and convenience. Standard rechargeablebatteries power the entire Topcon instrument and field controllerproduct lines. The new waterproof, dustproof instrument design isready to take the punishment of even the harshest job siteconditions .

Features:- Innovative, completely cable-free system design- New RC- 3 with Superior XTRAC Quick -Lock tracking technology - 1000m- The most advanced, longest range, and most powerful reflectorless technology available- Integrated interference free 2.4 GHz SpSp robotic data communications- New FC-200 with optional, snap-in radio module- Faster servo motor technology, faster tracking technology- Full-colour, graphical Windows CE instrument & field controller interface- Lighter weight than the competition

R

T

S

n

Faster, Lighter, Smaller...

Topcon GPT-9000A Robotic Total Station System



23/40

ImageMaster Software Image master provides image and scan control of the imaging station through WiFi connection,providing remote operation from the comfort of your vehicle or even an offsite location. Imagesare gathered using two digital cameras and stream video up to 10 fps. In addition to scanned andmeasured points, images can be used to provide additional fill -in data through the power of photogrammetry.

All the functionality of Topcons PI -3000Image Modeler Software is included inImageMaster. This gives you the ability tomodel and measure horizontal and verticaldistance across the entire image, even inbetween scanned points!

The laser scanning alternative - capture reality for unbeatable results!

www.topconni.co.uk 23

Please call for more information and prices on the Topcon IS range

Product information:Topcons IS combines the best of two worlds, advanced imagingand high-accuracy surveying, incorporating real-time field imagery

with spatial data. The IS has all the features of the GPT-9000Arobotic total station and more. The ISs powerful functionality iscontrolled using ImageMaster software that producesphotography with dimension, a revolutionary and cost effectivealternative to laser scanning.

How it worksThe IS has dual digital imaging cameras which provide a colour,real-time image on the touch sensitive LCD display. To define ascan area, simply tap the image display, or foruniform measurement of an area, select the auto-grid feature. TheIS locks these points to their exact position on the image, evenwhen the instrument is rotated. Once all points to be measuredare chosen, the IS performs a reflectorless measurement of eachpoint.

- Value priced alternative laser scanning- Intelligent Scan feature recognition- No blurry images - incorporated telescopic zoom to precisely pinpoint features 2000m away- Operate the IS from a remote location via WiFi - work from your office!- Whether monitoring a mine, creating volume calculations, creating an area topo, structural/

environmental monitoring, or even documenting as builts, the IS will get the job done.

Set points to scan onthe LCD with a tap

R o b o

t i c

T o

t a l S t a t i o n s

Topcon IS Imaging, Scanning & Robotic Total Station



24/40

Its Time 4

Total Station Accessories

We have a huge range of total station accessories in stock, so if what your looking for isn't listedor you just want some advice on what you need to get the job done, please give us a call to seehow we can help you.

Pick a combo to suit you... T

S

nA

Total Station Accessory Combo Deals

Product information:The mini prism pin pole set comes complete with 3-4 sectional poles thatscrew together to form a height of 1.8m with 100m graduated red and white

sections. The mini prism is a zero offset as standard, will slide and tilt foreasy alignment and features an extremely hard wearing build quality.

Mini Prism c/w Pin Pole Set


Standard Outfit SuppliedComprises of: Tripod, Prism c/w Target & Holder, Detail Pole, Mini Prism

Half Traverse KitComprises of: Tripod, Prism Station & Tripod, Prism c/w Target & Holder, Detail Pole, Mini Prism

Full Traverse KitComprises of: Tripod, 2 x Prism Station & Aluminium Tripod, Prism c/w Target & Holder,Detail Pole, Mini Prism


25/40

www.topcon.ie 25

Product information:The prism station outfit features a complete prism station with zero offset,aluminium tripod and hard carry case.

Product information:Ours detail poles are 2.5m and are of a very solid construction. All models are extremelydurable and feature a quick clamp system that locks the pole at the desired height.

Prism AssemblyCombines zero offset prism, target plate and holder either for use with atripod and adapter as a prism station or with a detail pole to form a detailoutfit.

A7 Prism AssemblyFeatures three zero offset prisms housed in a heavy-duty aluminium holder.The triple prism comes complete with target plate.

360 PrismMainly used with robotic total stations the 360 prism incorporates 6 zerooffset prisms housed in a tough weather proof body with protective rubbercasing. Various types available - please call for more information.

T o

t a l S t a t i o n

A c c e s s o r i e s

Product information:The tough, whether resistant mini prism can be set to either 0 or 30mm offset andfeatures a target plate and tilt for easy alignment. The mini prism can be attached

to a detail pole if required and comes complete with ground spike and case.

Mini Prism Outfit

Prism Station Outfit

Prism Detail Poles

Prisms



26/40

Please call to arrange a demonstration and for prices on available software packages

Product information:Topcon broke new barriers in GIS applications by incorporatingtheir industry leading dual-constellation satellite tracking into asmall hand-held GNSS receiver, the GMS-2. This innovativesystem also provides an integrated electronic compass and digitalcamera powered by revolutionary imaging technology. Thispowerful combination of dual-constellation satellite performanceand digital imaging technology has set new standard for GIS fieldmapping.

6 Its Time

Are you looking for a GPS solution on a budget?

TopPAD Software - For the advanced GIS professionalTopPAD software is a mobile GIS data collection system. It supports amulti-layer environment with industry-standard vector map and raster imagedisplay. TopPAD allows you to work in native shapefile formats eliminating

the need to convert to a unique field data file format with post-processingusing Topcon tools GIS office software made quick and efficient thanks to theoption of storing raw GPS data. You can also easily compare data directly togeographic features in the real world adding a deeper sense of reality to theGIS database.

Multiple device inputsThe GMS-2 gives you access to a variety of ports:- SD memory slot - Power port- USB port - Serial port- External antenna port

Advanced digital imagingThe GMS-2 features an integrated digital camera which allowsyou to collect, store and automatically link digital images as anattribute to GPS Coordinate locations.

Customized softwareTopPAD combines the power of ESRIs ArcPad with a special user interface and hardwaresupport specifically designed for Topcon GIS mapping systems.

Dual constellation trackingCombine the coverage of GPS with the GLONASS system, utilising more satellites means betterperformance in tough, obstructed areas and consistently lower DOP values.

GS M

ng

Topcon GMS-2 GIS Data Collector



27/40


Please call to arrange a demonstration and for prices on available software packages

Product information:Forever pushing the boundaries forward with new, innovative technology,Topcon have released the new GMS-2 Pro which like the GMS-2 offers

features aimed at revolutionising the way GIS mapping professionalswork in the field.

The GMS-2 Pro offers an integrated distance meter, offsetmeasurement and a unique image height/width measurement allin the highly mobile format of the GMS-2.

This revolutionary technology has now gone one step further...

Save time and moneyWhat really makes the GMS-2 Pro stand out is its groundbreaking,easy height and width measurement, just one shot and two tapswill give a targets height or width, it really is that easy! Using theimage screen you can simply measure the distance and capturethe image at the same time. This is realized by combining dis-tance measurement with innovative image capturing technology.On the screen, when you tap two points, you get the distance,height and widths. This makes the GMS-2 Pro ideal for difficult

measurements. Imagine the savings in time you will realize!

Changing field surveyingAn example from the world of forestry will clarify, you can measurearea and density of trees and many other objects, capturing theheight and width. Measuring the total volume of wood in the forestfor example no longer requires time consuming manualmeasurements. With the GMS-2 Pro the current DGNSS fieldsurvey is changed. Forever.

Uses of a GIS handheld:- All aspects of GIS collection- Control point survey- City development mapping- Cadastral investigation- Land use investigation- Hydrographic survey- Enviromental research- Natural resource investigation- Soil investigation- Agricultural investigation

- Oil drilling investigation- Utility management- Forrest investigation- Accident investigation- Disaster investigation- Crime violation investigation- Public property management- Archaeological investigation- Field controller with offset

measurment

Features:- GPS + GLONASS tracking- Easily measure a targets height and width- 2.0 mega pixel integrated digital camera- 50m integrated distance metre- Electronic compass and tilt sensor- Internal Bluetooth- Colour touch screen- Windows Mobile- DGNSS and static observation- Water & Dustproof (IP66)

G I S M a p p

i n g

Topcon GMS-2 Pro GIS Data Collector



28/40

Product information:The GMS-2 has an option that increases real-time correctioncapabilities of the GMS-2 hand-held receiver the addition of a

BR-1 DGPS beacon receiver. The GMS-2 GIS mobile GPSreceiver can utilize the new BR-1 to receive sub-meter differentialcorrection signals from the Coast Guard beacon in real-time fordata collection and navigation.

Why use GPS instead of a Robotic?

8 Its Time

Not so easily interrupted Now, with this additional receiver option, real-time correctionreception becomes possible in areas where it might not have beenpreviously. The Coast Guard beacon is a free, land-based radiosignal that is not easily interrupted by obstructions trees, buildingsand natural terrain obstacles.

Four channels The BR-1 has the unique feature of four channels and providesusers with up to four consistently available correction signals toachieve sub-meter, real-time accuracies in the field. The newreceiver will automatically select the best correction of the foursignals available to send to the Topcon GMS-2, a function making

the BR-1 a smart correction option for the GMS-2.

Run any number of rovers off one base

Base line from base to rover can be up to 30km

Whole site can work from just one control point

Similar one man solution to robotic technology

A GPS base station can provide corrections to yourengineers and machine control systems

No need for line of site from base to rover (less set ups required)

Can tie into the Ordnance Survey grid using static or network RTK

GS M

ng

Topcon BR-1 DGPS Beacon Receiver



29/40

www.topcon.ie

Please call for more information and prices on the complete GR-3 Range

Product information:Topcons GR -3 receiver, the next generation of system designand tracking technology, is now available with a completely newdigital UHF radio system utilizing DSP technology. Thistechnological advancement delivers far greater reliability andperformance than older analogue UHF technology of the past andsets new standards for performance, accuracy and innovativedesign.

GPS receiver design has taken a quantum leap forward with thenew GR- 3. It starts with 72 universal channels that support allcurrent and future planned satellite positioning signals. Thentheres the micro -tuned, precision antenna capable of receiving allG3 positioning signals with Topcons patented center -mountradio antenna for superior signal tracking and interferencereduction.

Features:- Digital UHF or Spread Spectrum radio- Advanced Rugged System Design- Optional Internal GSM/GPRS/CDMA Cellular Communication- 72 Universal Tracking Channels- Bluetooth Wireless Technology- G3 Satellite Tracking (GPS, Glonass, Galileo)

- Far ahead of any other receiver technology available

Its the Worlds First G3 (GPS, Glonass,Galileo) capable GNSS receiver

The GR-3 receiver incorporates a unique dual communicationsystem, featuring both cellular and radio technology. Offering a915 MgHz Spread Spectrum internal Tx/Rx or Digital UHF radio,the GR-3 can serve roles as either an RTK base or rover system.By utilizing the optional internal GSM/GPRS/CDMA modemcommunication system via the easily accessible cellular SIM cardslot, a user can extend their range far beyond radio capability orutilize both receivers as rover systems off a fixed base station or anetwork system.

Rugged magnesium I-beam construction for unbeatable strength &durability, the GR-3 also boasts easily accessible SD card memoryand dual hot-swappable batteries for unlimited continuousoperation. Internal Bluetooth wireless technology provides GR-3users with the advantages of a completely cable-free system withany Topcon field controller.

29

S u r v e y

G r a

d e G

P S

Topcon GR-3 GPS System



30/40

Its Time

Product information:RL-VH3D is built with integrated adjustable feet for verticalapplications. And for fast setup of wall track, and easyverification of vertical stud placement, the beam creates a laser

"chalkline" from floor to ceiling with the use of a simple scantarget. Plus, use the 90 split beam to ensure precise placementof corners and Tees.

Features:- Smart- Scan beam scanning - Fully automatic self-leveling- Horizontal/Vertical Split Beams- NiMH battery pack with up to 40% more power- Perfectly round spot- Compact and lightweight with integrated handle- Optional RC-30 remote control (RL-VH3DR only)

- Fast and accurate set up with slope capabilities- Use with a laser sensor for outdoor levelling up to 150m- 5 year warranty

0

SmartScan: Put the beam right where you need it, for as long as youneed it. Topcons SmartScan lets you draw a line of laser light on any surface, to any length, horizontal or vertical.It's very simple to do using the target included in thestandard package.Fast Horizontal/Vertical Self-Leveling: No thumb screws, no delicate pendulums, just fast level-ling you can count on. Push the power button and get towork. Durable and precise, Topcon's electronic levellingis the fastest in the industry and provides reliable,accurate levelling job after job.Horizontal & Vertical Layout: Ceiling grids to raised floors, corners to tees, the RL-VH3D will make alignment and layout a

snap. Place the RL-VH3D over a control point for perfectly vertical walls and 90 corners.Slope Matching: Matching slopes in remodelling projects is easy. Simply select the direction of slope and push thebutton. Electronic control up to a full 5 or use the manual levelling control to set-up for steepslopes.Interior & Exterior Work The rugged RL-VH3D is primarily designed for indoor use but with a range of 150m, water anddust proofing to IP52 standard, this versatile laser can also be used as a levelling laser outdoors.Topcon RL-VH3DR & RC-30 Wireless Remote Package: The RC-30 Wireless remote control gives you complete control of the laser up to 300m away.Powered by a single 9 volt battery the RC-30 features selectable frequencies so you can usemore than one RL-VH3DR without interruption. The RC-30 will only function with a RL-VH3DR.

High-end features you won't find in any other low-price laser available

n

&P

um

L

Topcon RL-VH3D Interior Laser



31/40


Features:- Ultra-visible GreenBeam - 4 times more visible!- Exclusive SmartScan delivers ultimate control and

visibility where you need it!- Built-in floor mount and simultaneous 90e beam

makes easy work of vertical layout.- Removable laser guard delivers full 360e laser sweep

with no pillar gaps. - Omni-directional RC-30 radio remote control is

included with a range up to 300. - Topcon quality and features at an economical price!- 5 year warranty

Product information:Featuring ultra-visible GreenBeam technology, the newRL-VH4G is a professional interior laser thats right for all

jobs and all budgets. Fast, dependable, durable, accurate,visible4 times more visible! And with the exclusiveSmartScan technology, you can quickly and easily drawa laser light on any surface, to any length you need, for aslong as you need it. The RL-VH4G also features auto HIshutdown that automatically turns the laser off if bumpedor disturbed saving costly re-work.

On-site demonstrations available - please call!

AutoScan: Topcon's AutoScan lets you draw a line of laserlight on any surface, to any length you need. And it stays thereas long as you need, automatically from the target.

Self-Leveling: Set up within 5 degrees of level and switch on,the RL-VH4G features fast self leveling (under 5 seconds) so itwill be spinning and ready to work when you are. Theres evenan auto HI shut down that automatically turns the laser off if it isbumped or disturbed saving costly re-work.

Vertical Alignment: Using the optional vertical floor target,setting wall studs is easy. Simply place the optional verticaltarget on your line, place the RL-VH4G at the other end, anduse the manual slope buttons or RC-30 remote to center thebeam on the target.

Why Green? It's brighter. Up to four times brighter than con-ventional beams. Your eyes see certain wavelengths of lightbetter than others, thats why Topcon developed GreenBeam.You can see GreenBeam anywhere under any condition, yourusing the beam instead of losing it, so the job gets done faster.

Unbeatable Visibility!

I n t e r i o r

& P l u m

b L a s e r s

Topcon RL- VH4G Smart Interior Laser



32/40

Its Time

Product information:Lay out reference points faster than traditional, labour intensive methods.The PLS-180 generates either a perfectly plumb or horizontal high visibilitybeam, or both, for a full 180 degrees.Includes: carry case, magnetic wall bracket, operating manual, 12 monthswarranty

Product information:The self levelling PLS90 is designed for use as a one man operation to setout and control 90 angles for both interior and exterior work whether theground is level or sloping. On long distances in pulsed mode the optionalsensor can be used.- Includes: carry case, 12 months warranty, operating manual- Optional construction kit: PLS-90 Line Laser c/w Reflector Target, Pole,

Laser Detector & Bracket

Product information:Determine your reference points much faster and easier with this powerfullaser. Bubbles levels and plumb bobs are a thing of the past whether yourlevelling, plumbing down or up from the floor to the ceiling, do it quicker andeasier with the PLS3.- Includes: carry pouch, 12 months warranty, operating manual

Product information:The PLS5 has 5 crystal clear, strong and highly visible laser points withranges up to 30m. This multi-purpose tool can be used for a wide variety ofapplications from steel erectors, glaciers, drywall, electrical and instillation.

All this comes from a robust tool that fits in the palm of your hand.- Includes: carry case, 12 months warranty, operating manual

2

n

&P

um

L

PLS 180 Interior Line Laser

PLS 90 Line Laser

PLS3 Point Laser

PLS5 Point Laser


PLS Laser Levelling Tools

Pacific Laser Systems designs their laser levelling tools to give designers and builders the abilityto transfer critical layout reference lines and points for any job site task. All PLS laser levellingtools are self-levelling, compact and durable.


33/40

www.topcon.ie

Cable strikes result in death, injury and disruption. In line with HSE recommendations for safedigging practise you are responsible for taking steps towards minimising the risks on-site.Todays hard pressed ground working contractor has the problem of needing to get the job done

fast without breaking through pipes or cables. C-Scope have the answer.

Site safety must be your number one concern

- Network Rail Approved - Accurately measure a cables depth- Detachable loudspeaker held next to the ear in noisywork situations- LCD meter for precision locating as standard- Fingertip controls for adjusting sensitivity and rapid switching between the

locators three operating modes

C-Scope is at the forefront of electromagnetic location technology with an R & D program thatgoes back more than 25 years. Dedicated to leading the industry forward C-scope offer animportant range of cable avoidance equipment widely recognised as the industry standard.

Cable Location & Avoidance

33

- Network Rail Approved - LCD meter for precision locating as standard- Detachable loudspeaker held next to the ear in noisy work situations- Fingertip controls for adjusting sensitivity and rapid switching between the

locators three operating modes

Product information:The C-Scope cable avoidance tool XD has all of the familiar user friendlyfeatures of the standard model but delivers more power, more precisionand more information from underground. The XD has acable depth mode activated by a simple push buttongiving the depth of an applied signal with instant accu-racy. To use the depth locating functions the XD must beused in conjunction with a signal generator.

Product information:The C-Scope cable avoidance tool is a rugged, lightweight andfull function, industry standard locator which every groundworking operative will find familiar and easy to use.

C a

b l e L o c a

t i o n

C-Scope Cable Avoidance Tool

C-Scope Cable Avoidance Tool XD



34/40

Its Time

All C-Scope models are Network Rail approved

Product information:These superb industry standard signal generators from C-Scope supplya 33kHz signal either through a direct connection or by induction. Youcan place the transmitter near the service in question to connect thesignal by induction or use the clips and leads supplied to make a directconnection, there are also signal clamps available to aid the directconnection method.

There are two models to choose from, the SGA indicates via audio thequality of connection and battery condition whereas the SGV providesvisual and audio indication of battery condition and quality ofconnection. Both C-Scope signal generators are compatible with anyother 33kHz cable avoidance tool offering flexible compatibility with any

existing cable avoidance equipment you may already have.

For long distance tracing or greater selectivity the signal strength is adjustable. A pulsed tone isused for the purpose of general detection as it is easy to distinguish from other signals on thesame line, with a continuous tone being used for depth measurement.

C-Scope Sonde Signal TransmitterThe C-Scope Sonde is a well known industry standard waterproof transmitter.Powered by 1 x AA battery this handy unit is compatible with all types of 33kHz cablelocators, has a 5m range and can be attached to either drain rods or a flexi-rod fortracing conduits or drains. A spring coupling adapter can be used with a drain rod forgreater manoeuvrability.

C-Scope Signal ClampThe C-Scope signal clamp is a safe and straightforward way toconnect the signal generator to a pipe or cable, ready for tracing.

4

C-Scope CAT & Genny Kit BagsThese handy, rugged carry bags are specifically designed totransport all makes and models of cable avoidance tools withplenty of room for accessories. The heavy duty bag offersincreased padding for instrument protection and furthercompartments for safe storage of accessories.

C

L

n

C-Scope SGA & SGV Signal Transmitters

C-Scope Cable Avoidance Accessories



35/40


I n s t r u m e n

t T r i p o

d s

Aluminium Tripod:Aluminium tripods are robust and very solid. They are suitablefor the every day use with surveying instruments. The industrystandard 5/8 thread and quick clamp system make this an

excellent, versatile tripod.

Min/max effective height 1.02m - 1.65m approx

Surveying Equipment Accessories

We offer a vast range of surveying accessories to suit most makes and models of equipment.There are too many to fit in one catalogue so if the accessory you need isn't featured then pleasecall and we will endeavour to help you get exactly what your looking for as soon as possible.

Heavy Duty Wooden Tripod:Made of straight-fibered ash and pine wood. All wooden partsare sealed with a high-tech plastic material that gives completemoisture protection preventing swelling of the wood. The plasticcoating of the tripod legs makes them extremely robust andweather resistant with a considerably long service life.

Min/max effective height 1.02m - 1.69m approx

Rise & Fall Tripods:With an elevating tripod, even heavy-duty instruments caneasily be set to the desired height. The reduction gear unitprevents any unintentional equipment descent.

2.5m Tripod min/max effective height: 0.55m - 2.5m approx

5/8 Thread Universal Instrument Tripods



36/40

Its Time

5 Metre Five Section Levelling Staff Our levelling staffs are made of high quality white powder-coated aluminium tubes. The individualsections slide in sturdy plastic extension guides which allow for trouble-free insertion andwithdrawal.

Projecting profiled edges additionally protect the levelling graduation on the front side. Therobust locking mechanism guarantees a safe locking of the individual telescopic sections.The entire telescopic levelling staff can be taken apart for cleaning and reassembled without tools.

An Extraordinarily Robust Staff!

5 Metre Fibreglass Levelling Staff The telescopic levelling staffs tubes are made of high impact

fibreglass materials which are extremely durable and robust. Brassbuttons and wear-resistant graduations on front and back ensure along life, even under tough conditions .

Features:- Extremely robust design- Durable buttons made of brass- High precision scale on front and back- Ergonomically designed shape for a better grip

- mm-graduation on back allowing overall height readings- Non-conductive (under dry conditions)- Laser receiver brackets easily attachable- Free carrying bag and snap-on bubble

6

L v

ngS

v

Levelling Staves


Precise Barcode Levelling Staff The barcode staff is for use with the Topcon range of digitalprecise levels and provides the user with a extremely highaccuracy levelling ability.

When used with a Topcon digital level, height and distancecan be automatically determined digitally by the DL-101C/ 102C. Since its a fully automatic electronic measurement,there is no need to make an optical reading! You just sightthe staff, focus, and press the measurement button. Itsthat simple! The results appear in the clearly visible display

window after about four seconds.


37/40

www.topcon.ie 37

The Measure Meter:The entry level model offersreliability and performance at a

reduced price. - Large easy to read display- Pointer indicates start position- Robust construction- Lifetime Guarantee- Retractable stand- Easy carry telescopic handle- Adds forward subtracts in reverse- Measures up to 9999.9 metres- Accuracy 1%

Imperial Measuring Options Are Available - Please Call

5000 Road Measure:Professional and robust roadmeasuring wheel with built instand and brake.

- Large easy to read display- Pointer indicates start position- Robust construction- 2 Year guarantee- Easy storage folding handle

- Free Carry Case- Accuracy 1%- Adds forward subtracts in

reverse

Land Measurer:Extra rugged construction foruse over agricultural land andother rough terrain.

- Robust solid tyre & spoke wheel- Heavy duty counting head- Scraper to prevent mud build up- Accuracy 1%- Five figure counting head- Adds forward subtracts in

reverse

M e a s u r i n g

W h e e

l s

Trumeter Measuring Wheels


01-8975900 Dublin 028-79659299 Toome

Call NowCall NowCall Now

Increase ProductivityIncrease ProductivityIncrease Productivity

Reduce CostsReduce CostsReduce Costs Stay Ahead of the CompetitionStay Ahead of the CompetitionStay Ahead of the Competition

Save TimeSave TimeSave Time

Its TimeIts TimeIts Time

Get The AdvantageGet The AdvantageGet The Advantage


38/40

Its Time 8

T

M

&

Product information:An optical 90 prism for basic manual measurement of 90 angles.

Optical Square

Product information:The Tuf-Lok is a rugged shock absorbent tape measureideal for both professional and DIY use.

- Tough, rubber-like ergonomic case- Positive action brake- Automated blade return with protective bump stop- Detachable belt clip- Self zeroing end-hook- Metric measurements- 5m & 8m lengths available

Tuf-Lok Pocket Tape

Product information:The Fisco Pacer is a heavy duty high specification tapedesigned for the professional user.

- Impact resistant moulded ABS frame with ground spike- Tufcote polyester coated steel tape- Low friction bearing for smooth rewind- Long winding lever and easy grip handle- Corrosion resistant end piece- Low friction mouthpiece insert- Metric measurements- 30m, 50m & 100m lengths available

Pacer Long Range Steel Tape

Product information:This rugged, heavy duty fibreglass long range tape measure isdesigned for the professional user.

- 13mm wide blade- Blade guidance wheels- Convenient retractable handle- Metric & imperial measurements- 30m, 50m & 100m lengths available

Fibreglass Long Range Tape



39/40


Product information:Produced to the highest specification, these survey books contain 50% ragbond paper which has high cotton linters content giving excellent tear resis-tance and strength when wet. It retains this strength and its writing surfacewhen dried after being subjected to adverse site or weather conditions.

- 2426 Collimation or H.P.C. Book- 2416 Rise & Fall Book- 2026 Field Book Ruled (2 Red centre lines with blue feints)- 2142 Dimension Book (Ruled blue lines numbered 1 up each opening)

S u n

d r i e s

Survey Books & Pads

Product information:Our range poles are constructed from a high strength aluminium core with plastic tubing solidlymoulded on top, this tried and tested design will resist the harshest of weather conditions. A twosection jointed option is available which allows you to break the pole down for easy storage.

Range Poles

Product information:Reflective targets work with most EDMs for monitoring work where you haveto leave targets in position over long periods of time. These self adhesivebright yellow targets can easily be seen in daylight and each 25mm target cangive a measuring range of over 100m with millimetre accuracy. Greaterdistance can be achieved using multiples of 5 and 9 targets together.

Reflective Retro Targets

Product information:A simple yet accurate device for monitoring crack movement. This inexpensive device consistsof two acrylic plates which move independently of each other, one has crosshairs and the other acorrelating grid. Attached using screws, an adhesive or even a combination of both, thecrosshairs will move across the grid indicating crack movement.

Crack Mark Tell Tales

Product information:Paker Kalon masonry nails have zinc plating for corrosion resistance and aribbed shaft ensuring a secure, strong grip into most materials. 100 per box.

- 32 x 6mm & 64 x 7mm PK survey nails available

PK Masonry Nails



40/40

Its Time 0

Equ

m

nS

v

&R

Service & Repair Department

Topcon service centres offer full quotationson all repairs free of charge and with noobligation to proceed, it is also the onlymanufacturer based service centre in Ireland,with all its engineers fully trained by TopconCorp.

Topcon also calibrate all makes of laser andsurvey products.

All instruments are tried and tested to ensureaccurate results to the manufacturersstandard giving the required assurance to theend user.

All Topcon laser products come with a five year manufacture warranty.All Topcon survey / GPS / machine products come with two years.

This takes effect from date of purchase by the end user

Topcon have two purpose built service centres of excellence in which all laser, opticaland GPS products are fully repaired and calibrated to manufacturers standard. We arealso the only service centre with ISO 9001 accreditation in Ireland.

Topcons service departments have sixexpertly maintained collimators in total.

Optical collimators are used for the repairand recalibration of all Auto-Levels,Theodolites and Total Stations. Lasercollimators are used for the repair andrecalibration of Laser Levels and PipeLasers.

Documents

TopconCatalogueIEV11