TOOLS - LMCTruck.com · Steering Wheel Puller features forged, milled yoke and center screw with pointed/ removable adaptor. Includes five sets of bolts in standard and metric sizes

24

Toll Free - USA & Canada

(800) 562-8782Order Your Catalogs & Parts Online

www.LMCTrUCk .com ¿Habla Español? (855) 456-2288

TOOLS

PART DESCRIPTION PRICE

38-1335 WIPER ARM TOOL $5.95

Sheet Metal

and Flex Edge

Body Panel

Alignment Shims

30-2826

30-2827

30-2828

30-2829

Spot Weld Cutter

Quickly drills out spot welds on body panels. Features 1/4" arbor and double-ended 3/8" diameter cutting blade with retractable pilot to ensure accurate cuts without damage to underlying panel.

38-1307

Panel and Trim removal

Tool Set

Five-piece Panel and Trim Removal Tool Set can be used to remove interior and exterior trim, fasteners, moldings and panels. Constructed of heavy-duty plastic for strength and flexibility. Call or go online and order yours today!

Plug Weld Pliers

Spot weld your new rockers or other body panels with ease and have a factory style weld to show for it. The Plug Weld Pliers feature locking jaws and a replaceable copper alloy pad to prevent burn through. Replacement pads sold below.

38-1318

Steering Wheel Puller

Steering Wheel Puller features forged, milled yoke and center screw with pointed/removable adaptor. Includes five sets of bolts in standard and metric sizes. Can also be used to remove pulleys, flanges and gears.

38-1199

Fastener removal Tool

This tool effectively removes the plastic fasteners found on most door panels. Working end is offset for ease of access.

Wiper Arm Tool

Wiper Arm Tool provides the leverage needed to safely remove and install wiper arms without damaging the vehicle.

Adhesive/Stripe

Eraser Wheel

Easily remove decals, pinstriping and adhesive tape residue without damaging your paint! This 3-1/2" diameter eraser wheel includes the arbor and is designed for use in air or electric drills at speeds up to 4000 rpm.

38-1314

This Hand Riveter Set includes one hand riveter and 60 blind rivets. Great for installing side molding, grille panels, sun visor mounts, bumper supports and much more.

Also includes four nozzles for 3/32", 1/8", 5/32" and 3/16" blind rivets.

38-1239

Air Hold Fittings and

Valve Spring Compressor

Remove or replace valve springs and/or valve guide seals without taking the cylinder head off the engine. Use by removing rocker arm

and fastening the tool to rocker stud with rocker nut, then use an air hold fitting and compressed air to hold valves up.

30-5088 30-5089

Hand riveter Set ...

Makes rivet Installation

Easy

Tech Tip: All locking pins or retaining nuts must be removed before using the Wiper Arm Tool.

21-1/2"

36-1/2"

Sheet Steel Flex Edge

38-1238


30-5088 AIR HOLD FITTING SET $4.95

30-5089 VALVE SPRING COMPRESSOR $10.95


38-1199 STEERING WHEEL PULLER $24.95


38-1318 PLUG WELD PLIERS $25.95

38-1319 REPLACEMENT PAD $8.95


38-1307 SPOT WELD CUTTER-3/8" $8.99

38-1396 REPL HEAD-3/8"-3 PACK $11.95


38-1239 HAND RIVETER SET $8.95


38-8245 PANEL & TRIM TOOL SET-5PC $9.95


30-2826 SHIM 1/16" THICK 3/8" SLOT $.49

30-2827 SHIM 1/8" THICK 3/8" SLOT $.49

30-2828 SHIM 1/16" THICK 1/2" SLOT $.49

30-2829 SHIM 1/8" THICK 1/2" SLOT $.49


38-1238 FASTENER REMOVAL TOOL $4.99


38-1314 ADHESIVE/STRIPE ERASER WHEEL $14.95


38-7772 STEEL-36" X 43" 20GA $33.95*

38-7773 STEEL-36-1/2"X21-1/2" 20GA $19.95

38-7897 FLEX EDGE-3/4"X36"X3" 22GA $11.95

* After the sell price means Oversize Part Charge. Your order will incur a charge of $20.00 for each oversized part. Due to packing and/or transportation requirements, please allow additional time for delivery. Oversized Parts are not available for air delivery.

Documents

TOOLS - LMCTruck.com · Steering Wheel Puller features forged, milled yoke and center screw with pointed/ removable adaptor. Includes five sets of bolts in standard and metric sizes