Tools for threaded inserts - Titgemeyer GmbH€¦ · LSC 7010 / HA200 .....19 Hand tools Electrical Hydropneumatic Hydraulic Tools for threaded inserts. 4 L Phone: +49 (0)541/5822-0

TITG

EMEY

ER T

b143

3GB(

0117

)1

Tools for threaded inserts

All rights reserved.The technical data quoted in this catalogue. performance descrip -tions. recommendations and instructions e.g. for the installation ofthe components available from us. are without liability. These arebased on our experience. Claims against us as a consequence are expressly excluded asmuch of the application of our goods remains outside our directinfluence.

It is a fundamental obligation of the user to ascertain and to decidewether the goods provided by us are appropriate for a particular application.

This catalogue is our intellectual property! Disclosure to third parties is prohibited.Reproduction – even in part – as well as use of our illustrations and TITGEMEYER part-numbering systems is only permitted with our express permission in writing.

Subject to change.Supply of goods is in conformity with our delivery and paymentconditions.

Gebr. TITGEMEYER GmbH & Co. KGOsnabrück

3Tb1433GB(0117)1 Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-491 eMail: [email protected]

Contents

HL1 ............................................................................................5HL1M ........................................................................................6HL3 ............................................................................................7HL9 ............................................................................................8TIOS EN18..................................................................................9FireBird ....................................................................................11RL 50........................................................................................12RL 50 AS ..................................................................................13RL 100......................................................................................15ProSert XTN20..........................................................................16RL 6100....................................................................................12LSC 6010 ................................................................................18LSC 7010 / HA200 ..................................................................19

Hand tools

Electrical

Hydropneumatic

Hydraulic

Toolsfor threaded inserts

4 Tb1433GB(0117)1Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-491 eMail: [email protected]

Tools for threaded insertsOverview – tools for threaded inserts

Tools for threaded insertsHL1

HL1M

HL3HL9TIOS® EN18Gesipa Firebird®

RL 50RL 50ARL 50SRL 50ASRL 100ProSert™ XTN20

Part No.

349 041 001349 051 001349 061 001349 081 001349 101 001349 121 001348 130 000348 190 010352 400 001351 000 000348 200 250348 200 300348 200 400348 200 500348 300 000347 000 000

Technology

hand toolhand toolhand toolhand toolhand toolhand toolhand toolhand toolrech. batt.rech. batt.

hydropneum.hydropneum.hydropneum.hydropneum.hydropneum.hydropneum.

M 3

✓

✓

✓

✓

✓

✓

✓(Al/St)

M 4

✓

✓

✓*✓*✓*✓*✓*✓*

✓*

M 5

✓

✓

✓*✓*✓*✓*✓*✓*✓*

✓*

M 6

✓

✓(Al)✓*✓*✓*✓*✓*✓*✓*✓*✓*

M 8

✓

✓*✓*

✓(St/Al)*✓*✓*✓*✓*✓*

✓(Al/St)*

M 10

✓

✓

✓(Al)✓(Al)

✓*✓*✓*✓*✓

✓(Al)

M 12

✓

✓(Al)

✓(Al)✓(Al)✓(Al)✓(Al)

✓

M 14

✓

M 16

✓**

* Also suitable for rivet studs** Always check first to see if the installation of M 16 blind rivet nuts is possible

Subject to change.


Tools for threaded insertsHand tools

HL1Manual rivet tool for installing M 4 to M 6 blind rivet nuts

• Three-piece set comprising ratchet, Allen key and installation head with threaded mandrel

• Easy to use and low-maintenance• Sturdy design and low-weight• Ideal for repairs or installing small quantities

Technical specificationsWeight: 0.8 kg

Scope of deliveryHL1 manual rivet tool, comprisingRatchet wrenchAllen keyOne-piece threaded mandrelInstallation headOperating instructions

Subject to change.

Range of applicationBlind rivet nutsAluminiumSteelStainless steel

M 4✓

✓

✓

M 5✓

✓

✓

M 6✓

✓

✓

HL 1 manual rivet tool compl. for M 4HL 1 manual rivet tool compl. for M 5HL 1 manual rivet tool compl. for M 6

Part No.349 041 001349 051 001349 061 001

Spare parts / Consumables

Threaded mandrel M 4Threaded mandrel M 5Threaded mandrel M 6Installation head M 4Installation head M 5Installation head M 6Allen keyRatchet wrench M 4 – M 6

Part No.349 047 870349 057 870349 320 870349 304 870349 305 870349 306 870349 311 870349 309 870

248

4819

64

130

49



HL1MManual rivet tool for installing M 8 to M 20 blind rivet nuts

• Three-piece set comprising ratchet, Allen key and installation head with threaded mandrel

• Easy to use and low-maintenance• Sturdy design and low-weight• Ideal for repairs or installing small quantities of fasteners

Technical specificationsWeight: 0.8 kg

Scope of deliveryHL1M manual rivet tool, comprisingRatchet wrenchAllen keyOne-piece threaded mandrelInstallation headOperating instructions


M 8✓

✓

✓

M 10✓

✓

✓

M 12✓

✓

✓

HL 1M manual rivet tool compl. for M 8HL 1M manual rivet tool compl. for M 10HL 1M manual rivet tool compl. for M 12

Part No.349 081 001349 101 001349 121 001


Threaded mandrel M 8Threaded mandrel M 10Threaded mandrel M 12Installation head M 8Installation head M 10Installation head M 12Allen keyRatchet wrench M 8 – M 12

Part No.349 302 870349 303 870349 322 870349 307 870349 308 870349 323 870349 312 870349 310 870

248

4819

130

6449



Subject to change.

HL3Manual rivet tool for installing M 3 to M 6 blind rivet nuts

• Quick and easy threaded mandrel changes• Complete with threaded mandrel and M 3 / M 4 / M 5 nose pieces• Compact design• Ideal for frequently changing sizes

Technical specificationsStroke: 7.5 mmWeight: 0.8 kg

Scope of deliveryHL 3 manual rivet toolThreaded mandrels – M 3 / M 4 / M 5 Nose pieces – M 3 / M 4 / M 5Operating instructionsPart No. 348 130 000


M 4✓

✓

✓

M 3✓

✓

✓

M 5✓

✓

✓

M 6✓

––


Threaded mandrel M 3Threaded mandrel M 4Threaded mandrel M 5Threaded mandrel M 6 / AlNose piece M 3Nose piece M 4Nose piece M 5Nose piece M 6 / Al

Part No.348 133 870348 134 870348 135 870348 136 870348 143 870348 144 870348 145 870348 146 870

265

ø 30

M 5

12

93

121



Subject to change.

HL 9Manual rivet tool for installing M 5 to M 12 blind rivet nuts and blind rivet studs

• Time-saving fast spin-on and spin-off function and fingertip-easyoperation

• Sturdy design• Quick and easy installation process• Easy-to-set insertion stroke• High performance• For installing small and medium quantities of standard blind

rivet nuts and blind rivet studs

Technical specificationsStroke: 7.5 mmWeight: 2.0 kg

Scope of deliveryHL 9 manual rivet toolThreaded mandrels – M 5 / M 6 / M 8 / M 10Nose pieces – M 5 / M 6 / M 8 / M10Operating instructionsPart No. 348 190 010

Range of applicationRivet nutsAluminiumSteelStainless steel

M 5✓*✓*✓*

M 6✓*✓*✓*

M 8✓*✓*✓*

M 10✓

✓

✓

M 12✓

––


Threaded mandrel M 5Threaded mandrel M 6Threaded mandrel M 8Threaded mandrel M 10Nose piece M 5Nose piece M 6Nose piece M 8Nose piece M 10

Part No.348 205 870348 206 870348 208 870348 210 870348 215 870348 216 870348 218 870348 220 870

Optional accessories

Internal threaded bush M 5Internal threaded bush M 6Internal threaded bush M 8Threaded mandrel M 12Nose piece M 12

Part No.348 225 000348 226 870348 228 870348 212 000348 222 870

510

150

ø 22

* Including blind rivet studs


Tools for threaded insertsElectrical

Subject to change.

TIOS® EN18Battery-driven blind rivet nut tool for installing M 3 to M 10 blind rivet nuts

• 90 pre-programmed setting forces to choose from• OLED display comprising symbols and plain text• Rapid-change nosepieces: M 3 – M 10• Intelligent lithium-ion battery technology• Extremely long battery life per charge:

up to 2300 rivets installed per battery charge• Brushless 18 V DC motor (BLDC)


M 3✓

✓

✓

M 4✓*✓*✓*

M 5✓*✓*✓*

M 6✓*✓*✓*

M 8✓

✓

✓

M 10✓

––

Technical specificationsInsertion force: 18.0 kNMotor: 18 V brushless DC motorWeight: 2.5 kg with battery (2.5 Ah)

Scope of deliveryTIOS EN18 battery-operated blind rivet nut toolOperating instructionsStorage casePart No. 352 400 000*

TIOS EN18 battery-operated blind rivet nut toolTIOS LIO1825 18 V / 2.5 Ah insertable batteryTIOS® LIO2830 18.0 V single chargerOperating instructionsStorage casePart No. 352 400 001*

OptionalTIOS Control process control (load-displacement monitoring)Radio module (WIFI 2.4 GHz and 5 GHz, Zigbee 2.4 GHz)Barcode reader (for programme settings and parts recognition)

* Pulling head units not included. Please order separately.




Subject to change.

DescriptionFixing kit, complete

Part No.352 200 921

Batteries and chargerDescriptionTIOS LIO1825 2.5 Ah insertable batteryTIOS LIO1850 5.0 Ah insertable batteryTIOS LIO2830 single chargerTIOS LIO2830-4 multi-charger, 4 charging pointsTIOS LIO2830-8 multi charger, 8 charging points

Part No.352 200 905352 200 904352 200 910352 200 911352 200 912

Installed rivets per charged battery (2.5 Ah)Thread size

M 5M 6M 8

Steel[Quantity]

850800450

Aluminium[Quantity]

11501050900

Accessories

Thread size

M 3M 4M 5M 6M 8M10

Complete pulling unit*Part No.

352 400 100352 400 101352 400 102352 400 103352 400 104352 400 105

Nose piece Part No.

351 013 000351 014 000351 015 000351 016 000351 018 000351 020 000

Threaded mandrelPart No.

351 003 000351 004 000351 005 000351 006 000351 008 000351 010 000

* Pulling head units not included. Please order separately.The pulling head unit does not depend on the size of thread and is only needed once.




Subject to change.

Installed rivets per charged batteryThread size

M 3M 4M 5M 6M 8M 10

Steel[Quantity]

550480400300180–

Aluminium[Quantity]

600520480400340300

FireBird®

Battery-operated blind rivet nut tool for installing M 3 to M 10 blind rivet nuts

• Good price-to-performance ratio• Ergonomic design• Short installation times• Compact, impact-resistant housing

Technical specificationsStroke: 5.5 mmInsertion force: 13.0 kNMotor: 14.4 V DC motorLength: 285.0 mmHeight: 287.0 mmNose cap ø: 29.0 mmNose cap length: 87.0 mmWeight: 2.3 kg with battery (1.3 Ah)

Scope of deliveryFireBird battery-operated blind rivet nut toolQuick-change battery 14.4 V / 1.3 AhCharger, 14.4 VThreaded mandrels – M 4 / M 5 / M 6Nose pieces – M 4 / M 5 / M 6Operating instructionsStorage casePart No. 351 000 000


M 3✓

✓

✓

M 4✓*✓*✓*

M 5✓*✓*✓*

M 6✓*✓*✓*

M 8✓*✓*–

M 10✓

––

Batteries and chargerDescription

Charger, 14.4 V Li-IonQuick-change battery 14.4 V / 1.3 Ah Li-IonQuick-change battery 14.4 V / 2.6 Ah Li-Ion

Part No.

431 976 000431 978 000431 982 000

Weight [kg]0.60.40.5

Thread size

M 3M 4M 5M 6M 8

M 10

Nose piece Part No.

351 013 000351 014 000351 015 000351 016 000351 018 000351 020 000


351 003 000351 004 000351 005 000351 006 000351 008 000351 010 000




Tools for threaded insertsHydropneumatic

Subject to change.

RL 50Hydropneumatic blind rivet nut tool for installing M 3 to M 12 blind rivet nuts and blind rivet studs

• Small in dimension, high in performance• One-step trigger• Infinitely adjustable stroke• Easy to use and low-maintenance• Automatic spin-off after each installation • Low-noise• Air supply fittable on left or right• Spin-off action can also be triggered manually• Safety valve prevents operating pressure overload• Reliable and tried-and-tested

Technical specificationsStroke: 1.5 – 5.8 mmInsertion force: 23.5 kN at 6 barInstallation force/Weight ratio: 10.7 kN/kgAir consumption: 4.6 l/rivetOperating pressure: 5 – 7 barAir supply: ø 6 mm (G1/4“)Weight: 2.2 kg

Scope of deliveryRL 50 blind rivet toolThreaded mandrels – M 4 / M 5 / M 6 / M 8 / M 10Nose pieces – M 4 / M 5 / M 6 / M 8 / M 10Oil refill setAngled air supplyOperating instructionsPart No. 348 200 250

Optional extrasRL50A – with autospin functionPart No. 348 200 300

RL50S – with tool-less stroke settingsPart No. 348 200 400


M 4✓*✓*✓*

M 3✓

✓

✓

M 5✓*✓*✓*

M 6✓*✓*✓*

M 8✓*✓*✓*

M 10✓

✓

✓

M 12✓

––

ø 52

ø 21

91

ø 117

29244

255

Optional accessoriesDescription

Hydraulic oil 1 lPart No.

460 299 870


Thread sizeM 3M 4M 5M 6M 8M 10M 12

Nose piecePart No.

348 213 870348 214 870348 215 870348 216 870348 218 870348 220 870348 222 870


348 203 870348 204 870348 205 870348 206 870348 208 870348 210 870348 212 000

Internal threaded mandrelPart No.

–348 224 000348 225 000348 226 870348 228 870

––




Subject to change.Subject to change.

RL 50ASHydropneumatic blind rivet nut tool for installing M 3 to M 12 blind rivet nuts and blind rivet studs

• Tool-less stroke settings• Automatic spindling (“autospin”)• Small in dimension, high in performance• One-step trigger• Infinitely adjustable stroke• Easy to use and low-maintenance• Automatic spin-off after each installation• Low-noise• Air supply fittable on left or right• Spin-off action can also be triggered manually• Safety valve prevents operating pressure overload

Technical specificationsStroke: 1.5 – 5.8 mmInsertion force: 23.5 kN at 6 barInstallation force/Weight ratio: 10.7 kN/kgAir consumption: 4.6 l/rivetOperating pressure: 5 – 7 barAir supply: ø 6 mm (G1/4“)Weight: 2.2 kg

Scope of deliveryRL 50AS blind rivet toolThreaded mandrels – M 4 / M 5 / M 6 / M 8 / M 10Nose pieces – M 4 / M 5 / M 6 / M 8 / M 10Oil refill setAngled air supplyOperating instructionsPart No. 348 200 500


M 4✓*✓*✓*

M 3✓

✓

✓

M 5✓*✓*✓*

M 6✓*✓*✓*

M 8✓*✓*✓*

M 10✓

✓

✓

M 12✓

––

29244,5

ø 52

ø 21

ø 117

255

91




460 299 870

Thread sizeM 3M 4M 5M 6M 8M 10M 12

Nose piecePart No.

348 213 870348 214 870348 215 870348 216 870348 218 870348 220 870348 222 870


348 203 870348 204 870348 205 870348 206 870348 208 870348 210 870348 212 000

Internal threaded mandrel Part No.

–348 224 000348 225 000348 226 870348 228 870

––




Subject to change.

RL 100Hydropneumatic blind rivet nut tool for installing M 6 to M 16 blind rivet nuts and blind rivet studs

• The only tool of its kind in the world for M 6 – M 16 sizes• Small in dimension, high in performance• One-step trigger• Infinitely adjustable stroke• Easy to use and low-maintenance• Automatic spin-off after each installation • Low-noise• Air supply fittable on left or right• Spin-off action can also be triggered manually• Safety valve prevents operating pressure overload• Reliable and tried-and-tested

Technical specificationsStroke: 2.5 – 9.0 mmInsertion force: 34.0 kN at 6 barInstallation force/Weight ratio: 11.7 kg/unitAir consumption: 6.2 l/rivetOperating pressure: 5 – 7 barAir supply: ø 6 mm (G1/4“)Weight: 2.9 kg

Scope of deliveryRL 100 blind rivet toolThreaded mandrels – M 8 / M 10 / M 12 / M 14Nose pieces – M 8 / M 10 / M 12 / M 14Oil refill setAngled air supplyOperating instructionsPart No. 348 300 250

Range of application

ø 65ø 27

ø 121

127

32997

306

* Including blind rivet studs** Always check first to see if the installation of M 16 blind rivet nuts is possible

Rivet nutsAluminiumSteelStainless steel

M 6✓*✓*✓*

M 8✓*✓*✓*

M 10✓

✓

✓

M 12✓

✓

✓

M 14✓

✓

✓

M 16**✓

✓

✓



460 299 870

Thread sizeM 6M 8M 10M 12M 14M 16

Nose piecePart No.

348 382 870348 318 870348 320 870348 322 870348 324 870348 326 870


348 381 870348 308 870348 310 870348 312 870348 314 870348 316 870

Internal threaded mandrelPart No.

––––––




Subject to change.

ProSert™ XTN20Hydropneumatic blind rivet nut tool for installing M 3 to M 10 blind rivet nuts and blind rivet studs

• Patented dual operating technology for optimised production flows:power control or motion control

• Flexible when using various thread sizes and grip ranges.• Focus on only a handful of tools in the workplace• High power-to-weight ratio of 11.1 kN/kg• No tools required to set stroke, pressure and threaded mandrel• Little maintenance required due to hydraulic lip seals and

high-strength threaded mandrels• Practical spin-off button• First-rate ergonomic handling• Lightweight at just 1.59 kg even when fitted with M 6 equipment

Technical specificationsStroke: 3.0 – 7.0 mmInsertion force: 17.6 kN at 5 barAir consumption per installed rivet: approx. 6.5 lWeight: 1.6 kg

Scope of deliveryProSert XTN20 blind rivet nut toolThreaded mandrels – M 4, M 5, M 6, M 8Nose pieces – M 4, M 5, M 6, M 8Maintenance kitOperating instructionsPart No. 347 000 000


M 3✓

✓

–

M 4✓*✓*✓*

M 5✓*✓*✓*

M 6✓*✓*✓

M 8✓*✓*–

M 10✓

––

Spare parts / ConsumablesThread size

M 4M 5M 6M 8

Complete pulling unit*Part No.

347 000 119347 000 120347 000 121347 000 122

Nose piecePart No.

347 000 104347 000 105347 000 106347 000 107


347 000 100347 000 101347 000 102347 000 103

* All sizes come supplied with the required lock nut Part No. 347 000 108.




Subject to change.

RL 6100Hydropneumatic hexagonal cutter for cutting hexagonal holes

• Small in dimension, high in performance• Entire process triggered with one single button• Sturdy design• Easy to use and low-maintenance• Easy-change cutter• Low-noise• Air supply fittable on left or right• Fixing point for balancer• Safety valve prevents operating pressure overload

Technical specificationsStroke: 9 mmInsertion force: 34 kN at 6 barInstallation force/Weight ratio: 11.7 kN/kgAir consumption: 6.2 l/holeOperating pressure: 5 – 7 barAir supply: ø 6 mm (G1/4“)Weight: 2.9 kg

Scope of deliveryTIOS 6100* hexagonal cutterAngled air supplyOperating instructionsOil refill setPart No. 348 450 200*

* Supplied without stamp or nose piece

M 10 nose pieces available on request.

DescriptionNose piece M 4Cutter for M 4 1 to 6 mmNose piece M 5Cutter for M 5 1 to 6 mmNose piece M 6Cutter for M 6 1 to 6 mmNose piece M 8Cutter for M 8 1 to 6 mm

Part No.349 780 001349 764 000349 781 001349 742 000349 782 001349 743 000349 783 001349 751 000

Optional accessories

DescriptionHydraulic oil 1 l

Part No.460 299 870

Consumables

Nose pieceCutter

Lock nut

303

28263

ø 27

ø 121



Subject to change.

Range of application (material thickness in mm)

Thread size

M 4*

M 5*

M 6*

M 8*

Hole-ø[mm]6.1

7.1

9.1

11.1

Material

SteelDuralumin (Al)

SteelDuralumin (Al)

SteelDuralumin (Al)

SteelDuralumin (Al)

100–

6.0–

5.5–

6.0–

6.0

200–

6.0–

5.0–

6.0–

6.0

3005.86.04.14.65.05.05.86.0

6004.0–

2.9–

3.5–

4.0–

5004.55.73.24.03.94.94.55.7

4005.06.03.54.34.35.25.06.0

Material strength [Mpa]

* Size of fastener, hole diameter prior to cutting



LSC 6010 hydraulic assembly pressThe LSC 6010 hydraulic assembly press is ideal for securely instal-ling press-in fasteners. The high-quality components ensure that theassembly press always runs reliably and requires little maintenance.With a press-in force of 60 kN, every standard press-in fastener canbe installed using this machine.With its extensive range of accessories, the LSC 7010, with HA 200,offers additional practical and economic means of working withmetals, e.g. clinching, edging or chamfering.

Benefits at a glance• Continuously adjustable installation force setting• Electronic and mechanical safety system• The mechanical safety system makes the installation

of non-conductive rivets possible• Powered by standard mains supply (400V)• Easy to use, quick retooling times• Low maintenance and service• Excellent price-to-performance ratio

LSC 6010 hydraulic assembly pressPart No. 463 300 000

Technical specificationsHeight: 1950 mmWidth: 725 mmDepth: 1040 mmWeight: 450 kgMax. press-in force: 60 kNProtrusion: 420 mmOperating stroke: 200 mmNominal voltage: 3/N/PE 400/230V ACRated frequency: 50 HzRated current: max. 4.0 AOutput: 1.5 kWCycle time: 2.5 to 5.2 sec. (depending on stroke)

AccessoriesWorkbench, adjustable, for LSC 6010 / LSC 7010Part No. 463 300 026

Subject to change.



Other possible uses for the LSC 7010:

LSC 7010 C-frame assembly pressPart No. 463 300 201

Technical specificationsHeight: 1897 mmWidth: 812 mmDepth: 1000 mmWeight: 250 kgMax. press-in force: 70 kNProtrusion: 520 mmOperating stroke: 130 mm

HA 200 hydraulic unitPart No. 463 300 200

Technical specificationsHeight: 845 mmWidth: 515 mmDepth: 670 mmWeight: 110 kgMax. pressure: 220 barNominal voltage: 3/N/PE 400/230V ACRated frequency: 50 HzRated current: max. 4.0 AOutput: 1.5 kW

Subject to change.

Clinching / Metal-joining:This method replaces the conventional spotwelding of thin sheeting.

Sheet bending / edging:This press makes light work of bending andchamfering thin sheeting up to a maximumwidth of 80 mm and a thickness of 2 – 3 mmdepending on the material.It also comes fitted with side and end stops.Depending on the requirements, the unit canbe set to between 9 and 70 mm.

Edging:This technology extends the surface whentapping thin sheeting of between 0.8 and 2 mm thickness.



PRESSTI® die partPart No.

463 300 001463 300 002463 300 003

Description

VI00001418VI00001417VI00001666

Size

LongShortWide

T

[mm]161650

L

[mm]683432

Weight approx.

[kg/item]0.30.30.4

PRESSTI® mplate for press-in nutsPart No.

463 300 004463 300 005463 300 006463 300 007463 300 008463 300 009

Description

VI00001426VI00001428VI00001429VI00001430VI00001431VI00001432

Thread

M 2/M 2,5/M 3M 4M 5M 6M 8M 10

D

[mm]6.37.98.7

11.0512.6517.35

Weight approx.

[kg/item]0.30.30.30.30.30.3

PRESSTI® template for press-in boltsPart No.

463 300 010463 300 011463 300 012463 300 013463 300 014463 300 015463 300 016

Description

VI00001419VI00001420VI00001421VI00001422VI00001423VI00001424VI00001425

Thread

M 2,5M 3M 4M 5M 6M 8M 10

D

[mm]2.53.04.05.06.08.010.0

Weight approx.

[kg/item]0.30.30.30.30.30.30.3

PRESSTI® template for press-in bushingsPart No.

463 300 012463 300 013463 300 019

Description

VI00001421VI00001422VI00001441

Thread

M 2 – M 3M 3

M 4 – M 5

D

[mm]4.25.47.2

Weight approx.

[kg/item]0.30.30.3

Subject to change.


Tools for threaded insertsTooling systems

Semi- and fully-automatic installation systems for the fastener range• Automatic sorting of fasteners• Precise feeding of fasteners• Integrated process control

We plan and construct fully-automatic assembly systems.Our range includes rivet installation units, power units and control units as well as feeder systems and spent mandrel extractors.Through the modular system, individual components can be combined for each specific use.Our specialists will be happy to advise you on-site and provide you with customised solutions.Contact us if you are looking for rational fastening technology!

Subject to change.


NOTES

Gebr. TITGEMEYER GmbH & Co. KGHannoversche Straße 97(Navigation: Hettlicher Masch 2)49084 Osnabrück. GermanyP.O. Box 43 2049033 Osnabrück. GermanyPhone: +49 (0)5 41/58 22-0Fax: +49 (0)5 41/58 22-491email: [email protected]

The

tech

nica

l spe

cific

atio

ns c

onta

ined

in th

is b

roch

ure

are

appr

oxim

ate

and

no g

uara

ntee

is g

iven

as

to th

eir a

ccur

acy!

Des

igns

are

sub

ject

to c

hang

e. O

ur d

esig

n pr

opos

als

are

non-

bind

ing!

TI

TGEM

EYER

, GET

O, F

ireBi

rd, T

IOS

und

PRES

STI a

re tr

adem

arks

. reg

iste

red

trade

mar

ks o

r pro

duct

nam

es b

elon

ging

to th

e re

spec

tive

title

hol

der.

Documents

Tools for threaded inserts - Titgemeyer GmbH€¦ · LSC 7010 / HA200 .....19 Hand tools Electrical Hydropneumatic Hydraulic Tools for threaded inserts. 4 L Phone: +49 (0)541/5822-0