Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
2
MAXIMIZE YOUR PRODUCTION CAPACITY WITH A TOOL PRESETTER
Leading manufacturers from all industries are taking advantage of the time saving, accuracy enhancing benefits of tool presetters to make their companies more competitive in today’s tight market.
Presetters measure the cutting edges of your tools to assure they precisely match job specifications and are ready to be used in the machine. Adjustments that could take up to 15 minutes when made on your machine can be made offline in less than a minute on a presetter, while your machine continues cutting.
The result — better parts, longer tool life, and less spindle downtime.
3
COMPANY HISTORIES ......................................................................Pg. 4
PRESETTER OVERVIEW ......................................................................Pg. 5
BASIC PRESETTERSIndex ....................................................................................................Pg. 7DIASET General Overview .....................................................................Pg. 8DIASET Indicator Type ...........................................................................Pg. 9DIASET Camera Type ............................................................................Pg. 10DIASET Options & Accessories ...............................................................Pg. 11
ADVANCED PRESETTERSIndex ....................................................................................................Pg. 13Speroni Overview .................................................................................Pg. 14-15MAGIS General Overview .....................................................................Pg. 16-17MAGIS .................................................................................................Pg. 18MAGIS CNC.........................................................................................Pg. 19MAGIS Options & Accessories ...............................................................Pg. 20-21FUTURA General Overview ....................................................................Pg. 22-23FUTURA ...............................................................................................Pg. 24-25FUTURA AutoShrink General Overview ..................................................Pg. 26-27FUTURA & AutoShrink Options & Accessories .........................................Pg. 28-33
CONTROL SOFTWARE Index ....................................................................................................Pg. 35Overview..............................................................................................Pg. 36Features ...............................................................................................Pg. 37-39SIMPLE VISION .....................................................................................Pg. 40EDGE 2.0 .............................................................................................Pg. 41EDGE PRO ...........................................................................................Pg. 42-43
ACCESSORIES Index ....................................................................................................Pg. 45Adapters ..............................................................................................Pg. 46-47Second CCD Camera & Second CCD Camera w/ Swing Arm .....................Pg. 48Dedicated Optics & Arm Extension .........................................................Pg. 49Second Monitor, Touch Screen & Data Clip ..............................................Pg. 50Cleaning Putty, Label Printer & Printer ....................................................Pg. 51Tool Pro ................................................................................................Pg. 52Kombi Grip & Tooling Mate ...................................................................Pg. 53Spindle Cleaners ...................................................................................Pg. 54Service & Preventative Maintenance .......................................................Pg. 55
4
COMPANY HISTORIES
SperoniEver since the beginning in 1963, Speroni has always applied a “Precision by Design” motto in all it's work; each and every product that leaves the factory incorporates this philosophy. The development of the Speroni product is based on the fact that the systems are means of production and as a result they have to produce tangible economic advantages for their customers.
After more than 50 years in the development and manufacturing of tool presetting and measuring systems and of inspection robots (CMMs) for the geometrical measurement of machined parts in a shop floor environment, Speroni is convinced that they have to continue to maintain the quality and originality of their solutions guided by the needs of their customers.
The functions and solutions characteristic of the market’s demand have always been dictated by the development and the importance of the tool resource in the manufacturing environment. Speroni has always supplied solutions to the specific demands before anyone else, as documented by their long history. Today, Speroni offers a vast line of products and solutions in the fields of tool preset, measurement & management and quality inspection of the manufacturing process.
In the future, Speroni wants to continue to work in close relationship with their customers all over the world in order to understand their needs and offer them the best technical and economical solutions. Solutions made using the most advanced technologies so that more and more companies around the world can benefit from the use of our Speroni systems. Speroni continues to invest towards the early “reading” of the market’s needs in order to steer fundamental research and development activity in the direction that will keep delivering need-oriented innovations first.
InnotoolThe key competences of Innotool are the development and construction of new products. Actions needed by market changes can be taken quickly with the help of knowledgeable, flexible production. The creation and testing of prototypes, as well as low volume productions, are key ingredients of Innotool success. Assembly is another important aspect of the organization. All products will be assembled, tested and shipped from the facility in Altach, Austria. This guarantees continuous quality assurance for your precision.
• Innovative solutions for optimizing production
• High quality products at economic prices
• Development, testing, production and construction done by Innotool in Austria
• Flexible manufacturing capabilities, modern machines (YASDA, Hembrug, Mori Seiki, Enshu) and strong partners guarantee high quality machining processes
• Time savings during production thanks to zero-point clamping systems, thoughtful applications and palletized systems
5
HIGHEND
SOPHISTICATED
MEDIUM
STANDARD
BASIC
PRESETTER OVERVIEW
Why Preset Tools?
• Reduce tool cost — increase tool life
• More spindle uptime — no more measuring on your machine tool
• Precise and repeatable measurements
• First part precision — adjust tools to within tolerance and run your part
• Eliminate test cuts
• Increase operator and overall efficiency
FUTURA
FUTURA AutoShrink & Specials
DIASET
MAGIS
Features DIASET MAGIS FUTURAFUTURA
AutoShrink
Measuring Range ø6" x 12" Length • • • •Measuring Range ø12" x 16" Length • • • •Measuring Range ø12" x 20" Length • • • •Measuring Range ø12" x 24" Length • • • •
Measuring Range Greater than ø16" x 24" Length • •Optical Measurement Capability • • • •
Label Printing • • • •Creating Tool Offsets for Machine Tool Control • • • •
Tool Clamping • • •RFID Capability • • •
Integrated Shrink Fit System •
Which Presetter is Best for You?
7
BASIC PRESETTERS
Technology Meets Design
The DIASET provides a stable measuring column and a solid base made out of mineral cast. These features guarantee high rigidity as well as excellent temperature resistance for high repeatability and accuracy of measurements. High precision scales, solid guideways and a digital display (which includes new standard functions) are making the measuring process easier and offering maximum measuring capabilities at an affordable price. The DIASET is available with either integral ISO50 or ISO40 taper spindles and has reduction adapters available for other common interfaces (ISO, HSK, KM, Polygon, etc.)
Features:
• High precision rotating spindle
• Maximum allowable runout: .0008" (.020mm) T.I.R.
• Fine-adjust hand-wheels (X & Z axis)
• Pneumatic locking mechanism (X & Z axis)
• Positioning accuracy of .0001" (.002mm)
• Dial indicator with digital readout
• Serial printer port
NEW!NEW!
DIASET OVERVIEW
Why DIASET? ..................................................................................Pg. 8
DIASET INDICATOR TYPE
ISO40/50 .........................................................................................Pg. 9
Options & Accessories ....................................................................Pg. 11
DIASET CAMERA TYPE
ISO40/50 .........................................................................................Pg. 10
Options & Accessories ....................................................................Pg. 11
8
WHY DIASET?
Innovative Solutions For Optimizing Production
High Quality Products at Affordable Prices
• Precision scales, solid guides and a digital display — making the measuring process easier
• Stable measuring column and a solid base made out of mineral cast
• Guaranteed high rigidity as well as excellent temperature resistance for high repeatability and accuracy of measurements
• Hardened and precision ground guideways are present on the horizontal (X) and vertical (Z) slides
• A single dial indicator for ease of calibration and measurement, with a camera option now available
• A large multi-function readout, or new LCD touch screen for use with camera
• High precision rotating spindle
• Pneumatic locking mechanism (X & Z axis)
• Serial printer port
9
DIASET INDICATOR TYPE
Optional Dymo label printer.
Catalog Number
DescriptionMeasurement
MethodSpindle
SizeMax
øMax
LengthPositioning Accuracy
Power Requirements
31.110.200 DIASET TS 240 Indicator ISO40
8.5 (220mm)
14.0 (360mm)
.0001 (.002mm)
110V/60Hz/.5A
31.110.201 DIASET TS 250 Indicator ISO50
31.110.202 DIASET TS 241 Indicator ISO4018.0 (460mm)
31.110.203 DIASET TS 251 Indicator ISO50
31.110.204 DIASET TS 450 Indicator ISO5016.0
(410mm)
18.0 (460mm)
31.110.205 DIASET TS 451 Indicator ISO50 22.0 (560mm)
31.110.206 DIASET TS 452 Indicator ISO50 26.0 (660mm)
31.110.207DIASET TS Post Processor
(Includes Monitor, Keyboard and Mouse)— — — — — —
2-Axis Indicator & Display
The DIASET’s 2-axis indicator has an ultra-sensitive embedded mechanic carbide touch probe to detect the slightest measuring pressures. A large, digital display unit was designed to support the newest technical requirements of today’s manufacturer’s. The display unit is conveniently located right behind the spindle to keep everything in a clear field of view.
A variety of adapters available for common shanks.
Pneumatic X & Z rapid movement complete with foot pedal control.
LABELPRINTERPG. 11
ADAPTERSPG. 46
10
DIASET CAMERA TYPE
Catalog Number
DescriptionMeasurement
MethodSpindle
SizeMax
øMax
LengthPositioning Accuracy
Power Requirements
31.110.210 DIASET TSC 240 Camera ISO40
7.0 (180mm)
14.0 (360mm)
.0001 (.002mm)
110V/60Hz/.5A
31.110.211 DIASET TSC 250 Camera ISO50
31.110.212 DIASET TSC 241 Camera ISO4018.0 (455mm)
31.110.213 DIASET TSC 251 Camera ISO50
31.110.214 DIASET TSC 450 Camera ISO5014.0
(360mm)
18.0 (455mm)
31.110.215 DIASET TSC 451 Camera ISO50 21.0 (550mm)
31.110.216 DIASET TSC 452 Camera ISO50 25.0 (645mm)
31.110.217DIASET TSC Post Processor
(Includes Monitor, Keyboard and Mouse)— — — — — —
31.110.218DIASET TSC Incident Light
for Live Picture— — — — — —
Camera & LCD Touch Screen Option Available
• Measures angle, radius, length and diameter geometries with one touch
• Save data externally via USB for quick input into your machine control or printing to a label
• Storage of up to 99 reference points
• Inspect cutting edges for built up edge, flank wear, or fractures using the optional incident light for live picture
NEW!NEW!
A 5.7" color touch screen.
Optional Dymo label printer.
Pneumatic X & Z rapid movement complete with foot pedal control.
A variety of adapters available for common shanks.
LABELPRINTERPG. 11
ADAPTERSPG. 46
11
DIASET OPTIONS & ACCESSORIES
Catalog Number
Description Length Width Height
32.100.016 DIASET Modular Workbench 30 30 34
Workbench
Consists of a black steel cabinet with a 30x30 maple top. Comes with a hinged, lockable door that limits theft and access to valuables. The workbench is equipped with a steel shelf that is height adjustable and excellent for the storage of accessories.
Catalog Number
Description
31.325.010 Dust Cover - DIASET
Dust Cover
Place this custom vinyl cover over your tool presetter, when it is not in use, to protect your investment from dust particles and other contaminants
Catalog Number
Description Model Type
32.300.014 TS Dymo Label Writer - Printer Indicator
32.300.011 TSC Dymo Label Writer - Printer Camera
Label Printer
For quick and error free output of tool measurements and data on an editable label. Tool diameter/length, tool holder code, offset data and tool description may be output.
For Camera Type
For Indicator Type
• Other custom bench configurations available
13
ADVANCED PRESETTERS
SPERONI OVERVIEW
Why Speroni? ..................................................................................Pg. 14-15
MAGIS
Overview ..........................................................................................Pg. 17
MAGIS .............................................................................................Pg. 18
MAGIS CNC ....................................................................................Pg. 19
MAGIS Options ...............................................................................Pg. 20-21
FUTURA
Overview ..........................................................................................Pg. 23
FUTURA ..........................................................................................Pg. 24-25
FUTURA Options .............................................................................Pg. 28-33
FUTURA AUTOSHRINK
Overview ..........................................................................................Pg. 26
FUTURA AutoShrink ........................................................................Pg. 27
FUTURA Options .............................................................................Pg. 28-33
14
WHY SPERONI?
Precision by Design — The Foundation of All Speroni Tool Presetting & Measuring Systems
+Est. 1963
Modularity: The modular design allows for a variety of configurations — offering customized solutions in standard products, and guaranteeing compatibility with future upgrades
Repeatability: The pearlitic cast iron design provides thermal stability — guaranteeing precision and repeatability, and eliminating the need for frequent recalibration
Longevity: Over fifty years of experience manufacturing future-proof technology through product evolution — so you can be sure your machine will never be obsolete
Unparalleled Accuracy: The combination of carefully selected components like the Heindenhain® scales, Schneeberger® guideways, Sony® CCD Camera, Dell® PC all function together to guarantee +/-.00008" precision
15
WHY SPERONI?
Variety: Speroni offers products and solutions in the fields of tool preset, measurement and management, and quality inspection of the manufacturing process
All Encompasing: Speroni is not an assembly company, it is directly involved in all phases, so choosing Speroni means no proprietary companies, which allows you to go straight to the source for future service
Prestigious Customers: Speroni customers speak for the products — and whether in aerospace, automotive, energy, medical, agriculture, etc., the Speroni name can be found world-wide
17
MAGIS GENERAL OVERVIEW
No Better or Easier Way to Improve Your Process
The STP MAGIS generation of tool presetting and measuring systems has revolutionized the value of entry level tool measurement. The innovative MAGIS control delivers all of the needed measuring features and functions in a user-friendly, clean and trouble-free single-screen user interface with unmatched ergonomic solutions.
• The structure of the MAGIS is made completely of aged pearlitic cast iron in order to guarantee the best thermal stability
• The solid design eliminates the need for frequent recalibration, guaranteeing the precision and repeatability of your system
• High frequency sub-pixel analysis delivers a 45x standard optical magnification
• Integrated high precision vertical rotating spindle for robustness, reliability and unmatched precision — T.I.R .0003" at 400mm
Features:
Industrial grade controls are conveniently positioned for ease of use. The pneumatically activated spindle disk brake system allows for locking at any point in the 360º rotation.
Rapid axis movement pneumatically activated. Independent and simultaneous buttons guarantee smooth and precise movement.
Precision ground integrated spindle with calibration edge for the fast and easy recalibration. Taper angle tolerance AT1. No need for an external caliper or master.
X & Z-axis fine adjustment hand wheels allow for micron precise smooth adjustments.
LCD monitor support arm provides for the best angle and work position to make your job easier and more comfortable.
Equipped with micron precise Heidenhain® glass scales, state of the art Schneeberger® guideways and the largest and toughest recirculating ball bearing contact face in its class. Guarantees the highest precision and repeatability along the whole system’s measuring range.
Front light episcopy allows for the manual inspection of the tool tip/insert detecting wear or cracks.
18
MAGIS
MAGIS 400 MAGIS 500 MAGIS 600
H (M
AG
IS 4
00)
H (M
AG
IS 5
00)
H (M
AG
IS 6
00)
W
L
H (M
AG
IS 4
00)
H (M
AG
IS 5
00)
H (M
AG
IS 6
00)
W
L
The Most Intuitive and Easy to Use Vision System on the Market Today
The new SIMPLE VISION PC-based control and image processing system is supplied with a brilliant high resolution 17" monitor for a crisp and clear visualization of your tool data.
The newly designed graphical interface and a powerful online help function guarantees a trouble-free and secure experience.
INTEGRAL SPINDLESPG. 20
SOFTWAREOPTIONSPG. 40
ADAPTERSPG. 46
Catalog Number
DescriptionZ Axis
Max LengthX Axis Max ø
Power* ConsumptionPneumatic
RequirementsL W H Weight
32.105.040 MAGIS 40016.0
(400mm)
-2.0+14.0 (-50mm+350mm)
100V (60Hz up to 5 AMP's)
110V (60Hz up to 5 AMP's)
220V (50Hz up to 3 AMP's)
1…2 cfm70-100 psi
(.05-.07 bar)
33.5 (852mm)
23.0 (583mm)
36.0 (916mm)
440 lbs (200 kg)
32.105.050 MAGIS 50020.0
(500mm)33.5
(852mm)23.0
(583mm)40.0
(1017mm)505 lbs (230 kg)
32.105.060 MAGIS 60024.0
(600mm)33.5
(852mm)23.0
(583mm)44.0
(1119mm)570 lbs (260 kg)
*Please specify power supply choice of 100V, 110V or 220V when ordering• Standard integral spindle is ISO 50 taper, other options available• Standard control software is SIMPLE VISION, other upgrades available
19
MAGIS CNC
Now Available in a Computer Controlled Version for Operator Independent Measuring Results
Speed, precision and ease of use allows for fast and precise positioning of the axes. The combination of the CNC spindle and the CNC X & Z axis control delivers a full CNC MAGIS. You can now automatically execute measuring cycles, adding speed and precision to your measurements. The unmatched repeatability and quality will further increase efficiency and profitability in your operation.
Catalog Number
DescriptionZ Axis
Max LengthX Axis Max ø
Power* ConsumptionPneumatic
RequirementsL W H Weight
32.105.041MAGIS 400
CNC16.0
(400mm)
-2.0+14.0 (-50mm+350mm)
100V (60Hz up to 5 AMPs)
110V (60Hz up to 5 AMPs)
220V (50Hz up to 3 AMPs)
1…2 cfm70-100 psi
(.05-.07 bar)
37.0 (940mm)
29.0 (737mm)
67.5 (1716mm)
505 lbs (230 kg)
32.105.051MAGIS 500
CNC20.0
(500mm)37.0
(940mm)29.0
(737mm)71.5
(1817mm)550 lbs (250 kg)
32.105.061MAGIS 600
CNC24.0
(600mm)37.0
(940mm)29.0
(737mm)75.5
(1919mm)595 lbs (270 kg)
*Please specify power supply choice of 100V, 110V or 220V when ordering• Standard integral spindle is ISO 50 taper, other options available• Standard control software is EDGE 2.0, other upgrades available
H (M
AG
IS 4
00)
H (M
AG
IS 5
00)
H (M
AG
IS 6
00)
W
L
NEW!NEW!
Speroni designed black and white steel workbench provides enough working area for all presetting requirements.
Equipped with pockets for inserts and screws as well as storage for various wrenches
Industrial grade controls are conveniently positioned for ease of use.
INTEGRAL SPINDLESPG. 20
SOFTWAREOPTIONSPG. 40
ADAPTERSPG. 46
20
MAGIS OPTIONS & ACCESSORIES
Catalog Number
Description
32.105.202 MAGIS ISO50 Automatic Mechanical Clamping System
32.105.203 MAGIS ISO40 Automatic Mechanical Clamping System
32.105.204 MAGIS ISO30 Automatic Mechanical Clamping System
Automatic Mechanical Clamping System
The proprietary design of this automatic system allows for a high repeatability and accuracy in the measurement of the tool. All of this is achieved without adding or removing any component on the machine. Guarantees correct unclamp and immediate release of the taper.
These systems are guaranteed for the following standard knobs: DIN 69872, ISO 7388/2A, ISO 7388/2B, MAS 403 BT, MAS 403 BT ANSI Type, ANSI 5.50 CATERPILLAR, BT (JIS 6339).
CAUTION
Catalog Number
Description
32.105.200 4 Position Index System
Internal Clamping Unit
Knobs
Clamping Force200kg
MAXIMUM CLAMPING TIME
3 SEC.3 SEC.
Reduction Adapters — Automatic Integrated Clamping
This adapter will simultaneously clamp to the tool as it is clamped to the spindle. The adapter has an integrated calibration notch with calibration values etched onto the side plate.
4 Position Index System
The 90º spindle indexing system enables you to fix in four precise positions. A key element for the fast and accurate preset and measurement of your lathe tooling.
Catalog Number
Description
32.310.100 ISO50 / ISO40 Speroni Original Reduction Adapter - A.I.C.
32.310.101 ISO50 / ISO30 Speroni Original Reduction Adapter - A.I.C.
32.310.102 ISO50 / ISO45 Speroni Original Reduction Adapter - A.I.C.
32.310.103 ISO40 / ISO30 Speroni Original Reduction Adapter - A.I.C.
32.310.110 ISO50 / HSK-40A/C Speroni Original Reduction Adapter - A.I.C
32.310.111 ISO50 / HSK-50A/C Speroni Original Reduction Adapter - A.I.C
32.310.112 ISO50 / HSK-63A/C Speroni Original Reduction Adapter - A.I.C.
32.310.114 ISO50 / HSK-80A/C Speroni Original Reduction Adapter - A.I.C.
32.310.116 ISO50 / HSK-80FM Speroni Original Reduction Adapter - A.I.C.
32.310.119 ISO50 / C3 Speroni Original Reduction Adapter - A.I.C
32.310.120 ISO50 / C4 Speroni Original Reduction Adapter - A.I.C
32.310.121 ISO50 / C5 Speroni Original Reduction Adapter - A.I.C
32.310.122 ISO50 / C6 Speroni Original Reduction Adapter - A.I.C
Catalog Number
Description
32.110.056 C3 Integral Spindle w/ Automatic Clamping
32.110.057 C4 Integral Spindle w/ Automatic Clamping
32.110.058 C5 Integral Spindle w/ Automatic Clamping
32.110.059 C6 Integral Spindle w/ Automatic Clamping
32.110.064 C8 Integral Spindle w/ Automatic Clamping
Catalog Number
Description
32.110.037 HSK-32A/C Integral Spindle w/ Automatic Clamping
32.110.038 HSK-40A/C Integral Spindle w/ Automatic Clamping
32.110.039 HSK-50A/C Integral Spindle w/ Automatic Clamping
32.110.040 HSK-63A/C Integral Spindle w/ Automatic Clamping
32.110.041 HSK-100A/C Integral Spindle w/ Automatic Clamping
21
MAGIS OPTIONS & ACCESSORIES
Workbench
Consisting of a black steel cabinet and 30x60 maple top work area. The closed workbench comes complete with PC storage shelf, one lower shelf excellent for accessories storage and a hinged lockable door that limits theft and access to valuables. This area is ventilated for optimal PC performance.
Catalog Number
Description Length Width Height
32.100.015 Modular Workbench - MAGIS 60 30 34
Catalog Number
Description
32.100.110 Dust Cover - MAGIS
Dust Cover
Protect your investment with a custom vinyl cover. Place over the tool presetter while not in use, to protect it from dust particles and other contaminants.
Speroni Original Workbench
Prevent dirt and debris from corrupting your presetter PC with this enclosed and ventilated workbench. Complete with storage area and lockable door to prevent any tampering. The Speroni designed black and white steel workbench provides enough working area for all presetting requirements. Reduction pockets can be purchased separately depending on tapers needed.
Holders for Reduction Sleeves & Accessories
Catalog Number
Description Length Width Height
32.105.175 Speroni Original Workbench - MAGIS 37 29 31
You do not need to upgrade to a CNC control to have a CNC/Autofocus spindle.
CAUTION
Automatic CNC Spindle Movement
For the automatic research of the tool's maximum diameter. This feature provides a totally automatic determination of the tool assembly's maximum focus and greatly aids the operator in the measurement and inspection of the tool assembly. A powerful disk brake system locks the spindle at any point in the 360º rotation.
Catalog Number
Description
32.105.101 Automatic (CNC) Axis - Autofocus
• The spindle axis can also be rotated manually
• Other custom bench configurations available
23
FUTURA GENERAL OVERVIEW
Unparalleled Precision, Repeatability and Longevity
The all new Speroni FUTURA line is the result of over 50 years of experience in the design and production of tool measuring and presetting systems. The FUTURA product line represents the most advanced and complete line of vertical tool presetting & measuring machines in its class.
• The structure of the FUTURA is completely made of aged pearlitic cast iron in order to guarantee the best thermal stability
• Micron precise Heidenhain® glass scales, state of the art Schneeberger® guideways and the largest and toughest recirculating ball bearing contact face in its class, guarantees the highest precision and repeatability along the whole system’s measuring range
• The solid design eliminates the need for frequent recalibration, guaranteeing the precision and repeatability of your system
• High frequency sub-pixel analysis delivers a 45x standard optical magnification
• Integrated high precision vertical rotating spindle — robustness, reliability and unmatched precision — 1μ concentricity and T.I.R @ 300mm of less than 5μ
Features:
Integrated X and Z axis fine adjustment hand-wheels allow for smooth micron adjustments throughout the system’s range of travel.
One hand rapid axis movement has been designed so the operator can move the axis simultaneously or independently. Because it's pneumatically activated, this feature guarantees smooth and precise movement of the linear axis.
New high precision 50 taper vertical rotating integral spindle fully manufactured by Speroni provides the highest precision in its class (T.I.R. max 4μ at 300mm). Taper angle tolerance AT1.
Industrial grade controls for the spindle disk brake system, the 4-position index, the mechanical tool clamping and all other controls are conveniently positioned on the new cockpit system.
New integrated adapter support is conveniently located in a drawer making them readily available and protected from the environment.
24
FUTURA
FUTURA STP 44 FUTURA STP 88FUTURA STP 66 FUTURA STP 1212
GUARANTEED
+/- .002mm+/- .002mm
Fully Customizable Operator Working Position
As a manufacturer, it is Speroni's constant aim to push the boundaries of tool presetting & measurement. The challenges faced encompassed aspects such as safety, ease of use and design. Ergonomics is sometimes used just as a marketing slogan, but the FUTURA definitely sets the bar, becoming the benchmark in that department. While maintaining the unsurpassed open spindle design, and introducing a completely new and redesigned cockpit solution, FUTURA allows each operator to fully customize their working position.
25
FUTURA
H
W
L
Catalog Number
DescriptionZ Axis
Max LengthX Axis Max ø
Power* ConsumptionPneumatic
RequirementsL W H Weight
32.220.000 FUTURA STP 44 16.0
(400mm)
16.0 (400mm)
100V (60Hz up to 5 AMP's)
110V (60Hz up to 5 AMP's)
220V (50Hz up to 3 AMP's)
1…2 cfm70-100 psi
(.05-.07 bar)
51.0 (1295mm)
63.0 (1600mm)
74.0 (1880mm)
1215 lbs (550 kg)
32.220.011 FUTURA STP 4624.0
(600mm)51.0
(1295mm)63.0
(1600mm)82.0
(2082mm)1260 lbs (570 kg)
32.220.012 FUTURA STP 4832.0
(800mm)51.0
(1295mm)63.0
(1600mm)90.0
(2286mm)1300 lbs (590 kg)
32.220.013 FUTURA STP 6416.0
(400mm)
24.0 (600mm)
51.0 (1295mm)
63.0 (1600mm)
74.0 (1880mm)
1300 lbs (590 kg)
32.220.014 FUTURA STP 6624.0
(600mm)51.0
(1295mm)63.0
(1600mm)82.0
(2082mm)1345 lbs (610 kg)
32.220.015 FUTURA STP 6832.0
(800mm)51.0
(1295mm)63.0
(1600mm)90.0
(2286mm)1390 lbs (630 kg)
32.220.016 FUTURA STP 61248.0
(1200mm)51.0
(1295mm)63.0
(1600mm)106.0
(2692mm)1435 lbs (650 kg)
32.220.017 FUTURA STP 8416.0
(400mm)
32.0 (800mm)
53.0 (1345mm)
63.0 (1600mm)
74.0 (1880mm)
1345 lbs (610 kg)
32.220.018 FUTURA STP 8624.0
(600mm)53.0
(1345mm)63.0
(1600mm)82.0
(2082mm)1410 lbs (640 kg)
32.220.019 FUTURA STP 8832.0
(800mm)53.0
(1345mm)63.0
(1600mm)90.0
(2286mm)1455 lbs (660 kg)
32.220.020 FUTURA STP 81248.0
(1200mm)53.0
(1345mm)63.0
(1600mm)106.0
(2692mm)1500 lbs (680 kg)
32.220.021 FUTURA STP 12416.0
(400mm)
48.0 (1200mm)
61.0 (1550mm)
63.0 (1600mm)
74.0 (1880mm)
1585 lbs (720 kg)
32.220.022 FUTURA STP 12624.0
(600mm)61.0
(1550mm)63.0
(1600mm)82.0
(2082mm)1630 lbs (740 kg)
32.220.023 FUTURA STP 12832.0
(800mm)61.0
(1550mm)63.0
(1600mm)90.0
(2286mm)1675 lbs (760 kg)
32.220.024 FUTURA STP 121248.0
(1200mm)61.0
(1550mm)63.0
(1600mm)106.0
(2692mm)1765 lbs (800 kg)
H
W
L
*Please specify power supply choice of 100V, 110V or 220V when ordering• Standard integral spindle is ISO 50 taper, other options available• Standard control software is SIMPLE VISION, other upgrades available
SPINDLE OPTIONSPG. 29
SOFTWAREOPTIONSPG. 40
ADAPTERSPG. 46
27
FUTURA AUTOSHRINK GENERAL OVERVIEW
• 1 micron resolution, positioning to +/- 2.5 microns, drive-pin becomes a true axis and allows for the highest level of precision
• Shrink fit any kind of tool including HSS tools ranging from ø6-32mm in diameter, additional quick-change coil is available for ø32-50mm
• Large range of diameter and taper degree in setting and cooling sleeves
Features:
Fully Automatic and Easy-to-Use, Preset, Measure & Shrink Fit System
Speroni was the first company to develop an integrated presetting and shrink fit system. While already considered top-of-the-line in terms of functionality, total accuracy and safety — the FUTURA AutoShrink is also the only hands-off fully automatic solution on the market.
The fully Integrated and hands-off automatic positioning coil for heating and cooling of the tool holders.
Cockpit conveniently holds all setting and cooling sleeves as well as provides a rest position for the cutting tools to be assembled and disassembled.
Through pin is mounted inside the spindle body and allows for the fully automatic setting of all shrink fit tooling. Achieve the highest level of precision requiring no adjustment after the tool is shrunk.
Catalog Number
Description
32.220.071 AutoShrink Kit - 400mm & 600mm for FUTURA
32.220.072 AutoShrink Kit - 800mm for FUTURA
32.220.073 Automatic Fume & Gas Extractor for AutoShrink Kit
• Above catalog number is an add-on option only and must be combined with a FUTURA catalog number• Also available as AutoTribos• Standard control software is EDGE PRO
SAME FEATURES AS THE STANDARD
FUTURAFUTURA
SPINDLE OPTIONSPG. 29
SHRINKOPTIONSPG. 33
28
FUTURA OPTIONS & ACCESSORIES
Catalog Number
Description
32.220.083 Mechanical Slide for Read/Write Head - Automatic
32.220.084 Bar Code Reader - Uniscan C2R
32.220.085 Read/Write Balluff Hardware & Software Model BIS C - 650
32.220.087 Tool Identification Balluffs - Handle For Read/ Write Head
Tool ID Chip
While allowing for the reading & writing of tools equipped with an ID chip, tools can be automatically recognized and the measured data can be automatically written. This software allows for the reading of the code field from the chip in order to automatically select the tool from the system database.
After the measurement/presetting of the cutting edge(s), it also allows for the writing of the actual measured data and possible nominal tool life information, as well as other data present within the Speroni.
An off-line feature allows for the complete reading and writing of the chips by typing the desired values from your keyboard. These values will automatically be checked for congruence.
Requires EDGE 2.0 Control Software.
CAUTION
GUARANTEED
+/- .002mm+/- .002mm
CNC Control Unit
Electronic micrometric movements allows for accurate and repetitive positioning of the X & Z axis. The positioning certainty of these two linear axis is 1 micron or .000039". This feature, together with the optional automatic CNC spindle movement, makes the measurement and inspection of the tool assembly completely operator independent. The mastering and recalibration of the system is a simple one step operation, which can be carried out on any of the Speroni original adapters stored in the database.
Micrometric hand-wheel, joystick and independent axes selection integrated in the control’s cockpit for maximum ease of use and ergonomics.
• P&F, Mazak and other systems available
29
Catalog Number
Description
32.220.027 F-20 Tool Holder Mechanical Clamping System
Catalog Number
Description
32.220.026 Adapter Quick Change System
Catalog Number
Description
32.220.025 High Precision Universal Vertical Rotating Spindle
FUTURA OPTIONS & ACCESSORIES
High Precision Universal Vertical Rotating Spindle
The uniquely designed spindle construction includes the hyper static, simultaneous fit clamping system for standard and special tooling adapters. The massive construction of the Speroni universal spindle ensures that its intrinsic accuracy is maintained throughout the life of the system. The accuracy and T.I.R of the complete system is unmatched in both absolute terms and durability.
Quick Change Adapter
Manually activated system allows the change of adapters in under 8 seconds, guaranteeing unmatched precision and accuracy not only within the spindle and adapter assembly, but also along the entire Z axis travel. The locking and unlocking of the adapters is carried out by rotating the multi-function spindle hand-wheel.
Requires at least one Speroni original adapter (adapter not included).
CAUTION
Speroni original adapter not included.
CAUTION
Mechanical Clamping System
The pneumatically activated universal retention knob clamping system is a proprietary design of this system and is unique in the industry. It allows for the mechanical clamping of any standard size knob applying a draw of about 300 kg (550 lbs) to ensure a high repeatability and accuracy in the measurement of the tool. All of this is achieved without adding, removing or exchanging any component on the machine. Guarantees a correct and repeatable clamp, unclamp and immediate release of tool holders.
Available for the new integral spindle included in this FUTURA configuration.
VDI HSK ISO C3 ÷ C10
You do not need to upgrade to a CNC control to have a CNC/Autofocus spindle.
CAUTION
MAXIMUM CLAMPING TIME
3 SEC.3 SEC.
CAUTION
MAXIMUM ADAPTERCHANGE TIME
8 SEC.8 SEC.
Automatic CNC Movement
For the automatic research of the tool's maximum diameter, X & Z axes. This provides a totally automatic determination of the tool assembly's maximum focus and greatly aids the operator in the measurement and inspection of the tool assembly. A powerful disk brake system locks the spindle at any point in the 360º rotation.
Catalog Number
Description
32.220.008 Automatic (CNC) Axis - Autofocus
32.220.007 Automatic (CNC) Axis - X & Z
32.220.009 Automatic (CNC) Axis - Micrometric
• All axis can also be moved manually
30
FUTURA OPTIONS & ACCESSORIES
ISO10 to ISO60 Adapters
The taper is supplied complete with zeroing/calibration data etched on the adapter itself.
All ISO adapters are manufactured by Speroni in accordance to the following standards: ISO 7388.1, DIN 69871, ANSI B 5.50, MAS/BT 403, DIN 2080, ISO 1947/1973 (E) & Taper Angle Tolerance AT1
C3 to C8 Adapters
The simultaneous fit and the automatic clamping mechanism supplied with this adapter allows for a secure and repetitive measurement of your polygon tooling. The clamping is carried out automatically via the optional F-20 mechanical clamping system.
VDIHSKISO C3-C10
Many More Adapters Available
BIG Kaiser is able to make adapters to your specific needs.
Catalog Number
Description
32.300.110 ISO30 Taper Q/C Adapter
32.300.111 ISO35 Taper Q/C Adapter
32.300.112 ISO40 Taper Q/C Adapter
32.300.113 ISO45 Taper Q/C Adapter
32.300.114 ISO50 Taper Q/C Adapter
32.300.115 ISO20 Taper Q/C Adapter
32.300.116 ISO25 Taper Q/C Adapter
32.300.117 ISO60 Taper Q/C Adapter
Catalog Number
Description
32.300.170 C3 Manual Clamp Quick Change Adapter
32.300.170.1 C3 Auto Clamp Quick Change Adapter
32.300.171 C4 Manual Clamp Quick Change Adapter
32.300.171.1 C4 Auto Clamp Quick Change Adapter
32.300.172 C5 Manual Clamp Quick Change Adapter
32.300.172.1 C5 Auto Clamp Quick Change Adapter
32.300.173 C6 Manual Clamp Quick Change Adapter
32.300.173.1 C6 Auto Clamp Quick Change Adapter
32.300.174 C8 Manual Clamp Quick Change Adapter
32.300.174.1 C8 Auto Clamp Quick Change Adapter
31
FUTURA OPTIONS & ACCESSORIES
HSK-32 to HSK-160 Adapters
The unique simultaneous fit design of the Speroni adapters deliver unmatched T.I.R. specs no matter the age of your presetting and measuring system.
All HSK adapters are manufactured in accordance to the following standards: DIN 69893 /Type A/B/C/D/E/F
VDI16 to VDI80 Adapters
Simultaneous fit and the lateral manual clamp supplied with this adapter allows for a secure and repetitive measurement of your VDI tooling.
Catalog Number
Description
32.300.212 HSK-25E Quick Change Adapter
32.300.214 HSK-32A/C Quick Change Adapter
32.300.216 HSK-32E Quick Change Adapter
32.300.218 HSK-40A/C Quick Change Adapter
32.300.219 HSK-40B/D Quick Change Adapter
32.300.220 HSK-40E Quick Change Adapter
32.300.221 HSK-40F Quick Change Adapter
32.300.222 HSK-50A/C Quick Change Adapter
32.300.223 HSK-50B/D Quick Change Adapter
32.300.224 HSK-50E Quick Change Adapter
32.300.225 HSK-50F Quick Change Adapter
32.300.226 HSK-63A/C Quick Change Adapter
32.300.227 HSK-63B/D Quick Change Adapter
32.300.228 HSK-63E Quick Change Adapter
32.300.229 HSK-63F Quick Change Adapter
32.300.230 HSK-80A/C Quick Change Adapter
32.300.231 HSK-80B/D Quick Change Adapter
32.300.232 HSK-80E Quick Change Adapter
32.300.233 HSK-80F Quick Change Adapter
32.300.234 HSK-100A/C Quick Change Adapter
32.300.235 HSK-100B/D Quick Change Adapter
32.300.236 HSK-100E Quick Change Adapter
32.300.237 HSK-100F Quick Change Adapter
32.300.238 HSK-125A/C Quick Change Adapter
32.300.239 HSK-125B/D Quick Change Adapter
32.300.240 HSK-125E Quick Change Adapter
32.300.241 HSK-125F Quick Change Adapter
32.300.242 HSK-160A/C Quick Change Adapter
32.300.243 HSK-160B/D Quick Change Adapter
32.300.244 HSK-160E Quick Change Adapter
32.300.245 HSK-160F Quick Change Adapter
32.300.246 HSK-63F/M Quick Change Adapter
32.300.247 HSK-80F/M Quick Change Adapter
Catalog Number
Description
32.300.118 VDI30 Quick Change Adapter
32.300.119 VDI40 Quick Change Adapter
32.300.120 VDI50 Quick Change Adapter
32.300.121 VDI60 Quick Change Adapter
32.300.122 VDI80 Quick Change Adapter
32
Catalog Number
Description
32.220.047 Label Printer Support
Catalog Number
Description
32.220.048 Printer Support
Label Printer Support
Support to place the Speroni defined label printer directly on the control arm of the machine.
Printer Shelf
Attached shelf to place the A4 printer directly at the machine.
Pneumatic Cockpit Height Adjustment
Adjust the cockpit pneumatically to the most comfortable operating height with an adjustment range of 200mm.
Catalog Number
Description
32.220.036 Pneumatic Cockpit Height Adjustment
FUTURA OPTIONS & ACCESSORIES
33
FUTURA AUTOSHRINK OPTIONS & ACCESSORIES
Industrial Power Transformer
Convert your plant from 220, 440, 460 or 480 volt 3 phase power to the 400 volt 3 phase power that is required for Speroni FUTURA AutoShrink.
Catalog Number
Description
32.316.900 Power Transformer
Catalog Number
Description
32.316.110 Complete 3° Shrinker Cooling Sleeve Set
Setting Sleeves
Available in metric and inch, setting sleeves are offered in a large range of diameters depending on the tool holder's size and tool shank size. Each sleeve is precision ground and marked for easy recognition.
Catalog Number
Description
32.316.111 Complete 4.5° Shrinker Cooling Sleeve Set
Catalog Number
Description
32.316.201 Inch Shrink Fit Setting Sleeve Complete Set (9 pcs.)
Catalog Number
Description
32.316.000 Metric Shrink Fit Setting Sleeve Complete Set (10 pcs.)
4.5º3º
Inch Metric
Cooling Sleeves
Available in metric and inch, cooling sleeves are offered in a large range of diameters and taper degree depending on the tool holder's size and tool shank size.
Includes the Following Sizes: 3/16", 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1¼"
Includes the Following Sizes: Metric — 5mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm,
18mm, 20mm, 25mm
Inch — 3/16", 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1¼"
Includes the Following Sizes: 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 25mm, 32mm
Includes the Following Sizes: Metric — 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm
Inch — 1/4", 3/8", 1/2", 5/8", 3/4", 7/8"
range of diameters and taper degree depending on the tool
ge of diameters depending on the tool holder s size andognition.
Metric
35
CONTROL SOFTWARE
CONTROL SOFTWARE
Overview ..........................................................................................Pg. 36Features ...........................................................................................Pg. 37-39
SIMPLE VISION
Overview ..........................................................................................Pg. 40
EDGE 2.0
Overview ..........................................................................................Pg. 41
EDGE PRO
Overview ..........................................................................................Pg. 42-43
36
HIGHEND
SOPHISTICATED
MEDIUM
STANDARD
BASIC
CONTROL SOFTWARE OVERVIEW
SIMPLE VISION Control Software
The new SIMPLE VISION PC-based control software and image processing system is supplied with a brilliant high resolution 17" monitor for a crisp and clear visualization of your tool data.
The newly designed graphical interface and a powerful online help function guarantees a trouble-free and secure experience.
New and innovative designs have been applied to the Speroni control and software interfaces. Our design, manufacturing and development experience is coupled with some of the most prestigious components on the world market in order to deliver unmatched reliability.
Which Software is Best for You?
EDGE 2.0 Control Software
The new EDGE 2.0 control software is the complete control for tool management, user management, tool inspection and CAD interfacing.
The EDGE 2.0 system is ready to implement RFID solutions for improved tool management.
EDGE PRO Control Software
The new EDGE PRO control software is the complete control for manual and full CNC systems. The powerful database allows for the cataloging of tool jobs, assemblies, zero-points and adapters, as well as single components.
Together with the CNC axis, EDGE PRO provides an easy interface for the automatic measurement of all your tools.
EDGE PRO
EDGE 2.0
SIMPLE VISION
37
Flying Cross-Hair
Automatic measurement of height, diameter, angles and nose radius.
Step Tools
Step tool measurements are easily and automatically performed.
Reamers
Measurement and setting of reamers without any data entry.
SOFTWARE FEATURES
38
SOFTWARE FEATURES
Job Comparison & TPL
Tool preparation list module allows you to easily and seamlessly prepare your tools for the next job.
Scanning Function
Measuring program for the measurement and scan of any tool contour.
Families Measuring Programs
Measuring and presetting of tools without data entry.
39
SOFTWARE FEATURES
3D Reconstruction and Measurement
Automatic 3D generation and dimensioning of acquired features.
Thread Mills
Easy programming and accurate measurement of pitch length, pitch diameter, etc.
40
SIMPLE VISION Control Software This newly designed interface is the standard software offered with a Speroni tool presetter.
Features: • Single window graphical interface
• Flying cross-hair
• 45x standard magnification
• Over 150 measuring icons
• Tool management for 1,000 tools
• Adapter & zero-point management
• Print management
• Dial indicator and runout functions
• MaxP function
• Full screen function and zoom to 120x
• Base post processor
• Data backup function
• Optional auto-focus function
Mea
sure
men
t Res
ult
Tool
s G
ridA
dapt
er G
rid
Mac
ro S
VS
Visi
on S
yste
mQ
uote
& F
unct
ions
Function Bar
Tool & Adapter Management
Integrated tool management for the storage of 1,000 tool assemblies and their specific tolerances. Adapter management and control includes an automatic zero-point monitoring feature which helps avoid crashes, rejects and machine downtime.
Runout Function
Automatic runout feature is the easiest and fasted way to determine your tool’s runout without any specific programming.
Autofocus Spindle
Autofocus spindle can be added in order to automate the important determination of the maximum diameter as well as the execution of the run out function. The cutting edge’s highest point is automatically measured independent of the operator and without any programming.
SIMPLE VISION CONTROL SOFTWARE
FOR MAGIS & FUTURA STANDARDSTANDARD
• Standard control software for MAGIS and FUTURA is SIMPLE VISION, other upgrades available
41
EDGE 2.0 CONTROL SOFTWARE
The new EDGE 2.0 PC based control and image processing system is the complete control for tool management, user management, tool inspection and CAM interfacing. Rapid and always up to date traceability of all of the operations that are being carried out on the tool presetting and measuring system.
Features:
• All the features of SIMPLE VISION
• Full tool management
• Pictures and graphics management
• Autofocus management
• Quick report management
• History tracking
• Automatic data backup
• Jobs management option
• Full post processor option
• User management option
Database and Step Programming
Catalog and program all your tools in seconds either on line or off line via the EDGE 2.0 RDL system.
Tool Jobs Management
Easily generate group lists of specific tool assemblies needed for specific machining cycles on your machine tools.
User Management
Configure your system for multi-user access and different levels of use. Each operator autonomously defines a specific user ID and relative password and access level.
Catalog Number
Description
32.105.102 EDGE 2.0 - MAGIS
32.220.005 EDGE 2.0 - FUTURA
FOR MAGIS CNC STANDARDSTANDARD
• Standard control software for MAGIS CNC is EDGE 2.0, other upgrades available
42
EDGE PRO CONTROL SOFTWARE
The new EDGE PRO PC-based control and image processing system is the complete control for manual and CNC configurations.
Features:
• All features of EDGE 2.0
• User management
• Jobs management
• Components management
• Manual & full CNC management
• Automatic measuring cycles
• Dedicated measurement cycles
• Interface to external TMS
• Interface to CAM systems
• Shrink management
The powerful database allows for the cataloging of tool jobs, tool assemblies, zero-points and adapters as well as single components.
Together with the CNC axis, EDGE PRO provides an easy interface for the automatic measurement of all your tools.
Self-Teach Programming
Powerful, flexible and extremely simple to use, the EDGE PRO self-teach programming allows you to freely program any simple or complex tool your way. The generation of a detailed and customizable inspection certificate is also a built-in feature.
Catalog Number
Description
32.105.104 EDGE PRO - MAGIS
32.220.006 EDGE PRO - FUTURA
FOR FUTURA CNC &FUTURA AUTOSHRINK
STANDARDSTANDARD
• Standard control software for FUTURA CNC and FUTURA AutoShrink is EDGE PRO
43
EDGE PRO CONTROL SOFTWARE
AutoShrink Dedicated Software Module
Easy step-by-step and mistake-free dedicated software module guides the operator in the correct setting of any shrink tool assembly. Each step of the assembly and disassembly process is guided by clear graphics as well as text instructions for maximum user friendliness.
Read/Write
Read OnlyRead Only
Read/Write
Connectivity to RFID Systems
The EDGE 2.0 system is ready to implement RFID solutions at any time for improved tool management and data communication.
45
ACCESSORIES
ADAPTERS
ISO to ISO .......................................................................................Pg. 46 ISO to Polygon ................................................................................Pg. 47 ISO to HSK ......................................................................................Pg. 47
CAMERAS
Second CCD Camera ......................................................................Pg. 48 Second CCD Camera with Swing Arm ............................................Pg. 48 Dedicated Optics .............................................................................Pg. 49 Arm Extension .................................................................................Pg. 49
MONITORS
19" LCD ...........................................................................................Pg. 50 Touch Screen ...................................................................................Pg. 50
TIME SAVERS
Data Clip ..........................................................................................Pg. 50 Cleaning Putty .................................................................................Pg. 51 Label Printer ....................................................................................Pg. 51 Laser Printer ....................................................................................Pg. 51
TOOL ASSEMBLY DEVICES
Tool Pro ...........................................................................................Pg. 52 Kombi Grip ......................................................................................Pg. 53 Tooling Mate ....................................................................................Pg. 53
MAINTENANCE
Spindle Cleaners .............................................................................Pg. 54 Service & Preventative Maintenance ...............................................Pg. 55
46
ACCESSORIES
Speroni ISO to ISO Adapters
Designed with a precision ground notch and calibration tag stamped with values for quick referencing. A full taper allows for more spindle contact when inserted into the Speroni's ground integral spindle. Simple drop-in design used for accurately measuring Z (length).
ISO to ISO Adapters
Designed with zeroing/calibration data etched on the sleeve itself. Simple drop-in design used for accurately measuring Z (length).
ISO taper according to DIN 69871
Precision Ground Taper Angle Tolerance AT1
BIG Daishowa ISO to Polygon Adapters
Designed with a rear access locking mechanism to allow for manual clamping of your polygon taper tooling. Must be actuated using an allen wrench — not supplied with adapter. Adapter must be referenced on face of adapters for accurate Z (length) readings.
Catalog Number
Description
32.310.094 ISO50 / ISO25 Speroni Original Reduction Adapter Sleeve
32.310.095 ISO50 / ISO30 Speroni Original Reduction Adapter Sleeve
32.310.096 ISO50 / ISO35 Speroni Original Reduction Adapter Sleeve
32.310.097 ISO50 / ISO40 Speroni Original Reduction Adapter Sleeve
32.310.098 ISO50 / ISO45 Speroni Original Reduction Adapter Sleeve
Catalog Number
Description
31.330.002 ISO50 / ISO25 Reduction Adapter Sleeve
31.330.003 ISO50 / ISO30 Reduction Adapter Sleeve
31.330.004 ISO50 / ISO35 Reduction Adapter Sleeve
31.330.005 ISO50 / ISO40 Reduction Adapter Sleeve
31.330.006 ISO50 / ISO45 Reduction Adapter Sleeve
Catalog Number
Description
BBT50-C5-40 BIG Daishowa Original Rear Clamping Adapter ISO50 / C5
BBT50-C6-50 BIG Daishowa Original Rear Clamping Adapter ISO50 / C6
BBT50-C8-70 BIG Daishowa Original Rear Clamping Adapter ISO50 / C8
• Allen wrench not included
47
ACCESSORIES
Speroni ISO to HSK Adapters
Speroni's adapter sleeve unique design includes an integrated clamping system which delivers unmatched T.I.R specs and ensures secure and repetitive clamping of your HSK tooling. The design allows for tool holder clamping without having to remove the coolant tube. Supplied with a precision ground notch and calibration gage with stamped values for quick referencing.
Innotool ISO to HSK Adapters
Designed with zeroing/calibration data etched on the sleeve itself. Simple drop-in design used for accurately measuring Z (length).
Catalog Number
Description
32.110.001 Speroni Original Manual Side Clamping Adapter ISO50 / HSK-32A/C
32.110.001.1 Speroni Original Manual Side Clamping Adapter ISO50 / HSK-32E
32.110.002 Speroni Original Manual Side Clamping Adapter ISO50 / HSK-32F
32.110.003 Speroni Original Manual Side Clamping Adapter ISO50 / HSK-40A/C
32.110.004 Speroni Original Manual Side Clamping Adapter ISO50 / HSK-40B/D
32.110.005 Speroni Original Manual Side Clamping Adapter ISO50 / HSK-40E
32.110.006 Speroni Original Manual Side Clamping Adapter ISO50 / HSK-40F
32.110.007 Speroni Original Manual Side Clamping Adapter ISO50 / HSK-50A/C
32.110.008 Speroni Original Manual Side Clamping Adapter ISO50 / HSK-50B/D
32.110.009 Speroni Original Manual Side Clamping Adapter ISO50 / HSK-50E
32.110.010 Speroni Original Manual Side Clamping Adapter ISO50 / HSK-50F
32.110.011 Speroni Original Manual Side Clamping Adapter ISO50 / HSK-63A/C
32.110.012 Speroni Original Manual Side Clamping Adapter ISO50 / HSK-63B/D
32.110.013 Speroni Original Manual Side Clamping Adapter ISO50 / HSK-63E
32.110.014 Speroni Original Manual Side Clamping Adapter ISO50 / HSK-63F
32.110.019 Speroni Original Manual Side Clamping Adapter ISO50 / HSK-100A/C
32.110.020 Speroni Original Manual Side Clamping Adapter ISO50 / HSK-100B/D
32.110.021 Speroni Original Manual Side Clamping Adapter ISO50 / HSK-100E
32.110.022 Speroni Original Manual Side Clamping Adapter ISO50 / HSK-100F
Catalog Number Description
BT50-TPA/HSK32E-100 BIG Daishowa Original Side Clamping Adapter ISO50 / HSK-32E
BT50-TPA/HSK40-100 BIG Daishowa Original Side Clamping Adapter ISO50 / HSK-40A/E
BT50-TPA/HSK50-100 BIG Daishowa Original Side Clamping Adapter ISO50 / HSK-50A/E
BT50-TPA/HSK63-100 BIG Daishowa Original Side Clamping Adapter ISO50 / HSK-63A
BT50-TPA/HSK63F-100 BIG Daishowa Original Side Clamping Adapter ISO50 / HSK-63F
Catalog Number
Description
31.330.024 ISO50 / HSK-63A/C/E Adapter Sleeve
31.330.027 ISO50 / HSK-50A/C/E Adapter Sleeve
31.330.052 ISO50 / HSK-40A Adapter Sleeve
31.330.053 ISO50 / HSK-80A Adapter Sleeve
31.330.054 ISO50 / HSK-100A Adapter Sleeve
Designed with zeroing/calibr
Precision Ground Taper Angle Tolerance AT1
noto
B
BT
BT5
BT50-
BT5
nd erance AT
• Allen wrench not included
BIG Daishowa ISO to HSK Adapters
Designed with a lateral access locking mechanism to allow for manual clamping of your HSK tooling. Must be actuated using an allen wrench (not supplied). Also contains internal access hole for coolant- through HSK tooling. Adapter must be referenced on face of adapters for accurate Z (length) readings.
48
ACCESSORIES
Catalog Number
Description
32.105.215 Second CCD Camera with Swing Arm
Catalog Number
Description
32.105.212 Center Height Camera - MAGIS
32.220.061 Center Height Camera - FUTURA
Catalog Number
Description
32.105.215 Swing Arm Camera - MAGIS
32.220.062 Swing Arm Camera - FUTURA
Second CCD Camera
The fixed second CCD Camera is also equipped with a dedicated inspection light. Field of view is 6mm x 4.5mm and has a visual magnification of 45x with a zoom function of 120x magnification.
This additional camera is completely independent from the optic that comes with the S.V.S. vision system. It is used to determine the center height of lathe and turning tools, as well as for the frontal radial inspection of any tool type.
The software edge finder allows for the manual measurement of radii, angles and distances on the illuminated cutting tool surface. This analysis is displayed on the same screen surface as the S.V.S. vision system and it can easily be activated via the symbols of the vision system.
Second CCD Camera with Swing Arm
This option offers the same advantages and functions as above, except the camera is on a swing arm rather than being fixed.
The swing arm has two fixed positions at 0º and 90º. Between -30º and 120º, the position can be manually adjusted.
This option requires EDGE 2.0 or EDGE PRO software module.
CAUTION
The maximum measurable diameter at horizontal camera position is 356mm and at a vertical camera position is 240mm. This option requires EDGE 2.0 or EDGE PRO software module.
CAUTION
• The maximum space between the optic carrier is 220mm
• The maximum space between the optic carrier is 220mm
49
ACCESSORIES
Catalog Number
Description
32.299.157 Dedicated Optics, 1.5mm x 1mm
32.299.164 Dedicated Optics, 3mm x 2mm
Catalog Number
Description
32.220.054 Arm Extension 50mm – Snap Gage Principle
32.220.055 Arm Extension 100mm – Snap Gage Principle
Arm Extension
This extension allows for the camera system to go across the spindle center line.
50mm The measuring capacity of the X axis will be reduced 100mm in diameter & 50mm in radius.
100mm The measuring capacity of the X Axis will be reduced of 200mm in diameter & 100mm in radius. Tool clearance between the optic carrier will be 220mm maximum.
Dedicated Optics
View micro tools with increased magnification.
• The maximum space between the optic carrier is 220mm
50
ACCESSORIES
Catalog Number
Description
32.105.106 Touch Screen Monitor 17" - MAGIS
32.220.056 Touch Screen Monitor 19" - FUTURA
Touch Screen
The touch screen technology upgrade allows you to easily access and operate all of the MAGIS software features without using the keyboard or mouse. This industrial grade touch screen is provided with a three year warranty directly from the manufacturer.
Catalog Number
Description
32.220.057 Additional LCD Monitor 19" - FUTURA
Second Monitor
With this option, your Speroni tool presetting machine becomes a dual monitor system and allows for a full screen image of your inspected tool.
Catalog Number
Description
32.300.010.3 Data Clip - 30 Taper
32.300.010.4 Data Clip - 40 Taper, HSK-63, C6, KM63
32.300.010.5 Data Clip - 50 Taper
32.300.010.1 Data Clip Labels - 1" x 2 1/8" (500 Per Roll)
Data Clip
Secures around the flange for easy labeling of tools.
Data Clip
S d th fl f l b li
NEW!NEW!
51
ACCESSORIES
Catalog Number
Description
32.300.011 Thermal Alphanumeric Label Printer - MAGIS
32.220.042 Thermal Alphanumeric Label Printer - FUTURA
Catalog Number
Description
32.220.043 Laser Printer A4
Label Printer
Allows the printing of text labels and bar code labels (for PC based controls).
Laser Printer
For printing black & white laser-quality lists and inspection certificates.
Catalog Number
Description
32.400.049 Tool Cleaning Putty – 2oz.
Cleaning Putty
Keep your measurements accurate by wiping away dust particles, oil or coolant from your tools. One package includes 6 units of cleaning putty.
Cle
Keefrom
52
ACCESSORIES
Quick-change system uses one permanently mounted base unit and multiple adapters for different types and sizes of tool shanks.
Full 360° radial tool rotation, while clamped, permits easy access to large diameter tools making it ideal for changing inserts on large face mills without removing the tool from the drive keys. Tools can be locked at increments of 30° by engaging an index pin. The adapter can also be rotated 360° and locked into any position in increments of 45°.
Taper Size
Catalog Number
63A 31.300.214
100A 31.300.216
125A 31.300.217
HSK Taper
Taper Size
Catalog Number
32A 31.300.017
40A 31.300.015
50A 31.300.008
63A 31.300.006
100A 31.300.005
125A 31.300.029
Taper Size
Catalog Number
30 31.300.001
35 31.300.000
40 31.300.002
45 31.300.003
50 31.300.004
60 31.300.020
Steep Taper HSK Taper
• HSK Type E/F, VDI and Polygon taper also available
• Base unit must be ordered separately (Catalog Number 31.300.100)• HSK Type E/F and VDI also available• Vario Spin adapters also available
Taper Size
Catalog Number
C3 31.300.153
C4 31.300.154
C5 31.300.155
C6 31.300.156
C8 31.300.158
Taper Size
Catalog Number
32A 31.300.130
40A 31.300.131
50A 31.300.132
63A 31.300.133
80A 31.300.134
100A 31.300.135
Taper Size
Catalog Number
30 31.300.110
35 31.300.111
40 31.300.112
45 31.300.113
50 31.300.114
Steep Taper HSK Taper Polygon Taper
Taper Size
Catalog Number
40 31.300.202
50 31.300.204
60 31.300.206
Steep Taper
Tool Pro
The Tool Pro is a unique tool holding device for the assembly and disassembly of tapered V-flange tooling and modular tooling systems. Depressing the large gold button permits the adapter to rotate 360° and lock in 45° increments, allowing convenient access for all operations. Tightening torque for tool clamping can be applied in a downward motion, rather than horizontally, allowing the it to be installed on tool carts. Tools are simply lowered into the tool pot and automatically clamped into place with a spring loaded pin that locates into the V-groove of the tool holder. With the Tool Pro, you reduce damage to your expensive tool holders, shanks and machine spindles while providing a safe working environment for your tool assembly operators — advantages which pay off very quickly!
Spin
Vario
Standard
• Polygon taper also available
Tool Pro Stand
Safe and secure tool assembly stationed anywhere that’s convenient on your shop floor.
Catalog Number31.300.500
NEW!NEW!
53
ACCESSORIES
Tooling Mate
øC
øD
Taper No.øM (x4)
øPH
Kombi Grip
Innovative two way clutch and needle roller clamping system assures secure clamping at the tool flange periphery. Safe design eliminates any possibility of damage to the shank taper during the tightening process.
Catalog Number
CV/BT No.
øC øD H øW øP øMAdapter Model
TMS40-30 302.992 2.362 5.906 4.331 3.543 .276 M6
TMA40-30
TMS40-40 40 TMA40-40
TMS50-40 404.134 3.465 7.480 6.299 5.118 .354 M8
TMA50-40
TMS50-50 50 TMA40-50
Catalog Number
HSK No.
Polygon Coupling No.
øC H øW øP øMAdapter Model
TMS40-32R 32 C3
2.992 6.4964.331 3.543
.276 M6 or UNC 1/4
TMA40-32R
TMS40-40R 40 C4 TMA40-40R
TMS40-50R 50 C5 TMA40-50R
TMS40-63R 63 C6 3.425 6.772 TMA40-63R
TMS50-80R 80 C8 4.488 8.4656.299 5.118
.354 M8 or UNC 5/16
TMA50-80R
TMS50-100R 100 — 4.882 8.622 TMA50-100R
øC
H
øM (x4)
Adapter Lock Screw
WP
Adapter
Taper No.
øC
H
Taper No.
øD
øM (x4)
WP
Adapter Lock Screw
Taper No.
øD
Made of Special Resin Material
Replaceable Adapter
• 1 adapter is included• Adapters can be ordered individually• Adapter Lock Screw is available as a spare part (Model: RTM0615) • Mounting bolts (4 pcs.) must be ordered separately
Catalog Number
HSK No. (Form A/E/F)
Polygon Taper No.
øC øD H øP øM
KG25R 25 — 1.890 3.1102.559
2.441
.276 M6or UNC 1/4
KG32R 32 C3 2.165 3.346 2.717
KG40R 40 C4 2.480 3.6612.756
3.031
KG50R 50 C5 2.953 4.134 3.504
KG63R 63 C6 3.465 4.862 2.953 4.154.354 M8
or UNC 5/16KG80R 80 C8 4.213 5.591 3.543 4.882
KG100R 100 — 5.000 6.378 3.937 5.669
• Mounting bolts (4 pcs.) must be ordered separately
Kombi Grip must be securely fixed to a bench with 4 mounting bolts.
CAUTION
Tooling Mate must be securely fixed to a bench with 4 mounting bolts.
CAUTION
54
ACCESSORIES
Catalog Number
Description Taper No.
20.580.220 ISO Spindle Cleaner ISO20
20.580.230 ISO Spindle Cleaner ISO30
20.580.240 ISO Spindle Cleaner ISO40
20.580.245 ISO Spindle Cleaner ISO45
20.580.250 ISO Spindle Cleaner ISO50
Catalog Number
Description Taper No.
20.580.001 Morse Taper #1 Spindle Cleaner MT1
20.580.002 Morse Taper #2 Spindle Cleaner MT2
20.580.003 Morse Taper #3 Spindle Cleaner MT3
20.580.004 Morse Taper #4 Spindle Cleaner MT4
20.580.005 Morse Taper #5 Spindle Cleaner MT5
20.580.006 Morse Taper #6 Spindle Cleaner MT6
Morse Taper
Spindle Cleaners
The unbeatable tool to ensure absolute cleanliness of tapered spindles, which maintains the precision and prolongs the life of your expensive machine tools, cutting tools and tool holders.
• Robust construction with high oil and grease resistance
• Plastic injection molded core with fluted locations for cleaning strips ensures accurate sizing and cleaning efficiency
• Cleaning strips will maintain adhesion to the taper core due to inset location even under scrubbing action
• Cleaning strips positioned at well spaced intervals to remove even large residual particles
• A quality control product
Catalog Number
Description Taper No.
20.580.025 HSK-25 Spindle Cleaner HSK-25
20.580.032 HSK-32 Spindle Cleaner HSK-32
20.580.040 HSK-40 Spindle Cleaner HSK-40
20.580.050 HSK-50 Spindle Cleaner HSK-50
20.580.063 HSK-63 Spindle Cleaner HSK-63
20.580.080 HSK-80 Spindle Cleaner HSK-80
20.580.100 HSK-100 Spindle Cleaner HSK-100
20.580.125 HSK-125 Spindle Cleaner HSK-125
Catalog Number
Description Taper No.
SC-C3 Polygon Taper C3 Spindle Cleaner C3
SC-C4 Polygon Taper C4 Spindle Cleaner C4
SC-C5 Polygon Taper C5 Spindle Cleaner C5
SC-C6 Polygon Taper C6 Spindle Cleaner C6
SC-C8 Polygon Taper C8 Spindle Cleaner C8
Polygon Taper
HSK Taper
ISO Taper (With Pull Stud Recess)
55
SERVICE & PREVENTATIVE MAINTENANCE
Speroni Tool Presetters are designed ready for the future. In fact, most new technologies can be applied to the main construction of every Speroni machine. This makes the purchase of a Speroni Presetter less of a purchase, and more of an investment. Maintaining your investment and ensuring a long healthy life for your presetter is very important and we would like to help in guaranteeing it's life. Arrange an annual preventative maintenance checkup and know that your machine is running accurately and consistently.
Services Included:
• Clean, inspect and lubricate all applicable parts of the machine
• Inspect and adjust bearing preloads on X and Z axis slide assemblies
• Verify spindle total indicator runout (T.I.R.) and that the column is square to spindle centerline, done using a NIST traceable certified bar
• Clean and adjust mechanical and optical assemblies
• Performance evaluation and verification of all functions
• Verification and repeatability and zero-point calibration
• Free two hours of onsite training
Upgrade/Retrofit
Looking for a cost effective alternative to completely replacing your existing presetter? Ask one of our BIG Kaiser representatives what it will take to upgrade or retrofit your existing BIG Kaiser presetter system with today's top technology. Not only can you extend the life of your current presetter several years, you also get the satisfaction that your presetter continues to meet ISO certification.
BIG Kaiser recommends annual maintenance and certification contracts.
To find out more, please ask your BIG Kaiser representative for a detailed quotation.
03/2015 © Copyright 2015 BIG Kaiser Precision Tooling Inc. All rights reserved.
2600 Huntington Blvd, Hoffman Estates, IL 60192 Phone: 847.228.7660 • Fax: 847.228.0881 www.bigkaiser.com • [email protected]
BIG Kaiser Precision Tooling Inc. is not just presetters. We’re boring tools, tool holders,
cutting tools, zero-point workholding, accessories and so much more. We’re BIG-PLUS®, CAT, BT,
HSK and BIG CAPTO. We’re tightening tolerances, reducing set-up and cycle times,
increasing tool life, and enhancing performance while driving down cost. We’re delivering
high-performance products and ingenuity for shops that demand results.