Upload
tamara-spier
View
229
Download
2
Tags:
Embed Size (px)
Citation preview
The EIG Energy Grand Buffet™
One-Stop Comprehensive Pathway to Maximize Energy
Cost Control with the Latest Technology Advances
Tomorrow’s Energy Standards Today
Worldwide electricity demand and prices are projected to continue to rise significantly for the foreseeable future
www.energyinnovation.net 2
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
7
8
9
10
11
12
13
Electricity Price: Energy Information Adminis-tration (EIA), Section of US Department of En-
ergy (DOE), Annual Energy Outlook 2010
Nom
inal ce
nts
/kW
h
Forecast
The first step to materially cut energy cost is through the use of the ‘best available technology’
www.energyinnovation.net 3
Delivered commercial energy consumption per capita– from the U.S. Department of Energy/EIA Annual Energy Outlook 2010
The Energy Grand Buffet™ comprehensive approach
EIG has integrated the broad spectrum of energy technology into a big picture approach to lighting, HVAC, controls, sensor systems, solar, water efficiency, computer power management, window film, cool roofs, and many others. The failure to be comprehensive can often cost the most energy efficient facilities an unnecessary 8% to 12% of their energy bill, and less efficient facilities an unnecessary 30% to 50%.
www.energyinnovation.net4Tomorrow’s Energy Standards Today
The latest energy technology advances
As part of the Energy Grand Buffet™ approach to energy
efficiency, EIG identifies and brings the latest advances in
traditional, renewable and emerging technologies to the
mainstream market for energy savings opportunities that
go far beyond conventional approaches and what most
facility managers believed was available or even possible.
www.energyinnovation.net 5Tomorrow’s Energy Standards Today
Seeking out advanced technology gems
To identify technology ‘gems’, EIG works internationally with:
Utilities ..…………….………………. that approve technology for rebatesContractors ..…….............…..…….. that install equipment for customersCustomers ..………..…………..…… that use equipment in their facilitiesUniversities and R&D companies ....that develop technologiesEngineering companies…..…………that consult in product designTesting laboratories …………..……..that test new products Venture capital firms……….……..….that finance new technologies
www.energyinnovation.net 6Tomorrow’s Energy Standards Today
Broad range of cost reduction opportunities
New HVAC systems ... Potentially save up to 70% with the latest generation of the most energy efficient HVAC and chiller optimization equipment
HVAC efficiency Huge savings with a wide range of controls, CO and CO2 and other sensor systems, window film, and ultraviolet emitters
Lighting technology Save to 80% for buildings, garages, parking lots, and street lights with latest fluorescent, LED, induction, HID lighting, and controls
Computer power management … PC network software reduces energy cost during periods on non use and improves IT department efficiency
Water efficiency ….. Save up to 70% with low flow restroom fixtures, landscape water use, water recycling and water use for facility operations 7 www.energyinnovation.net
A showcase of the latest advances in traditional and emerging technologies
Technology Page
Overview of Technologies ------------------ 9Daylight Harvesting Ballasts ------------------ 14LED lighting ------------------ 16Smartcool HVAC Cycle Manager Unit ------------------ 22HVAC Ultraviolet Emitters ------------------ 23Computer Power Management ------------------ 25Turbocor Oil-Free Compressor ------------------ 26CO2 Sensor System ------------------ 32Solar Protection Window Film ------------------ 36 CO Sensor Systems ------------------ 38Hotel Keycard Energy System ------------------ 39Solar Energy ------------------ 42Delta P Pressure Independent Water Flow Control Valve ------------------ 43Diesel Emergency Generator Heat Pump ------------------ 46FANWALL System ------------------ 47
www.energyinnovation.net8
Advances in traditional and emerging technologies -1
9www.energyinnovation.net
Advances in traditional and emerging technologies - 2
10www.energyinnovation.net
Advances in traditional and emerging technologies - 3
11www.energyinnovation.net
Advances in traditional and emerging technologies - 4
www.energyinnovation.net12
Advances in traditional and emerging technologies - 5
www.energyinnovation.net13
Daylight Harvesting Ballast
Daylight Harvesting Ballast reduces
fluorescent lighting cost an average
40-50% in areas that receive daylight.
When the ballast photo-sensor senses
outdoor light, power is automatically
reduced. Fixed level dimming is available.
Unique product eliminates expensive
controls and wiring runs required for older
generation technology.
14 www.energyinnovation.net
University of Louisville daylight harvesting result
15 www.energyinnovation.net
LED lighting is becoming mainstream
www.energyinnovation.net16
LED lighting technology, which can save over 80% of the cost of incandescent, flood, spot, MR-16, and HID lighting for interior space, parking garages, outdoor lighting, and street lighting, has significantly advanced during the last 24 months.
The light output, lumens per watt, cost-effectiveness, lighting quality and a standard 5-year warranty, for the first time, make LEDs a compelling investment.
LEDs are mercury-free and do not have the disposal and pollution concerns of mercury-containing fluorescent and compact fluorescent lighting. LEDs long life produces huge maintenance savings.
Why LED lighting is important
www.energyinnovation.net 17
U.S. DOE has chosen energy smart LED lighting to play a key role in reducing electric light consumption in the U.S. by 50% by 2025
U.S. DOE quote
“LED lighting has the potential to reduce lighting energy use by 50% percent, and to revolutionize the efficiency, appearance and quality of lighting. No other lighting technology offers so much potential to save energy, at a time when our nation needs bold solutions to vastly reduce our energy consumption.”
LED lamps are the better system
Philips, the world’s 2nd largest manufacturer of incandescent and fluorescent lamps states that LED lamps are the better system
“We are not spending one dollar
on research and development
for compact fluorescent lamps.”
- Kaj den Daas, Chairman and
Chief Executive, Philips lighting
Philips is the 2nd largest lamp manufacturer with a 26% global market share
Committing the bulk of R & D budget to LED lamp research and expects LED lamps to be 20% of
professional market sales, near term
www.energyinnovation.net18
Yesterday’s Technology
LED product features and benefits
Uses up to 84% less electricity than incandescent
Typical payback 12 to 36 months, based on hours and electric rate
Up to 50,000 hour lifespan for lamp maintenance & disposal savings
Emulates the look, feel and performance of incandescent & halogen
Smooth beam pattern provides superior uniformity without shadows
Contains no mercury, lead or other hazardous materials, fully recyclable
www.energyinnovation.net19
LED application at Cartier
Standard for all Cartier stores - 8W LED replaced 20W halogen L E D M R - 1 6 D M
Reduced Energy Consumption
Achieved lighting requirements using 60% less energy
Quality illumination providing both definition & sparkle
Reduced Maintenance Costs Eliminates lamp maintenance for up to 5.7 years @ 24/7/365
Lasts 50,000 hours – up to 25X’s longer than halogen
Environmentally Friendly
Contains no mercury and is fully recyclable
Radiates no UV or IR, will not discolor or heat surfaces or objects
Reduces global warming by decreasing greenhouse gas emissions
www.energyinnovation.net20
LED application for bay lighting
Garage and Canopy Lighting
Energy smart – lower power consumption & higherefficiency uses less electricity by using it more efficiently
Sustainable - use less energy, save money on electricity, conserve natural resources and generate less pollution
Longer system life - reduces lamp replacement, Maintenance, disposal and liability costs
Typical applications include parking garages, canopies, storerooms
www.energyinnovation.net21
HVAC cycle manager unit (CMU)
The HVAC cycle manager unit (CMU) typically saves
12% to18% on compressors with one or two stages of
on/off control for A/C, refrigeration and heat pump systems.
HVAC often is controlled by an on/off thermostat with no EMS capability. Duty Cyclers don’t adjust to dynamic conditions. With the CMU retrofitted to HVAC, an EMS algorithm ensures the compressor operates at higher average suction pressure, enhancing heat removal efficiency.
When demand conditions permit, the CMU shuts off the compressor at varying times each cycle, similar to a coasting condition, while keeping temperature within the set-point range. The # of cycles increases nominally, within guidelines.
22www.energyinnovation.net
HVAC ultraviolet emitters
All HVAC systems attract mold, which fouls coils and reduces heat transfer. Bacteria and
viruses deteriorate indoor air quality.
UVC, as with water treatment, food processing, and hospital clean rooms, destroys the DNA of mold, bacteria, and virus micro-organisms. UVC emitters are installed downstream of the coils in an HVAC application. The UVC cleans coils, returning heat transfer to near original levels, and dramatically improving IAQ.
This reduces energy cost, eliminates coil and drain pan cleaning, greatly reduces absenteeism and improves productivity.
23www.energyinnovation.net
HVAC ultraviolet (UVC) emitter technologyUVC cleans coils and greatly improves indoor air quality
Coil fouling is demonstrated
on samples taken from coils
prior to installation of UVC.
The UVC eradicates
bacteria and mold as
demonstrated from samples
off the same coil 30 days
after UVC installation.
www.energyinnovation.net24
Sample taken after Steril-Aire
Sample taken before Steril-Aire
Computer Power Management
Computer Power Management software reduces energy cost during periods of non-use, especially when IT is involved in maintenance operations.
The system can be used for a large number of computers in a single location or in locations nationally with estimated average savings of $50 per year per computer in high cost utility areas.
Reports are provided pre and post installation for energy cost per computer. Many utilities pay substantial rebates. No-cost demonstrations can be provided.
www.energyinnovation.net25
Turbocor - Oil-free compressor technology Turbocor oil-free compressor retrofit reducing HVAC costs up to 70%
This revolutionary compressor technology provides efficiencies up to 30% better than any other compressor in its size range with the added value of being extraordinarily quiet and virtually vibration free.
— 2003 AHR Expo Innovation Awards
www.energyinnovation.net26
Turbocor oil-free compressor
Redefining the compressor
www.energyinnovation.net27
With built-in VFD, compressors match cooling load at 60 tons to 700 tons +
Compact (approx.1/5 ordinary compressor size)
Light (Less than 270lb)
Quiet (less than 70dB at full load)
Virtually frictionless (magnetic bearings)
On board digital electronics
Energy efficient and oil-free
Turbocor refrigerant compressor system
Computerized, oil-free compressor system
with VFDs and magnetic bearings reduces
energy use up to 70%.
It has only one moving part, is quiet,
virtually vibration free and approximately 1/5
the size and weight of conventional
compressors.
Startup uses under 2 amps, compared to
500 + for conventional compressors.
28 www.energyinnovation.net
Whether its 60 to 120 tons or 720 tons - - - Turbocor starts on less than 2 amps
www.energyinnovation.net29
www.energyinnovation.net30
ASHRAE Study 601 on compressor efficiency
Lo
ss of E
fficiency
Percent Oil in System
The vast majority of installed chillers have an excess amount of oil in the cooling system.
The oil requirement in the refrigerant charge of compressors reduces system efficiency often over 20%.
Conventional compressors can have significant energy loss
In ten (10) chillerstested in an ASHRAE study, the average overcharge of oil in the system was 12.88%; this equated to an average 21% energy loss.
www.energyinnovation.net31
Percent Oil in System
CO2 Sensor SystemEliminate excess outside air ventilation beyond actual occupancy needs
CO2 sensor systems, placed in zones throughout
a building, eliminate the high cost of excessive
outside air use for building ventilation. Outside air
is pre-set for maximum expected occupancy.
When occupancy is below maximum level, there is
often up to 500% over ventilation, wasting energy
to heat or cool unnecessary levels of outside air.
Sensors detect CO2 from occupants and adjust
outside air to match real time occupancy needs for
fresh air ventilation, resulting in a major reduction
of unnecessary heating or cooling of outside air.
32www.energyinnovation.net
CO2 sensor technology savings opportunity
The design level for outside air is generally far in
excess of average occupancy
levels
Many buildings have adjusted outside air settings, which are in excess of the design levels
Major savings can be produced by eliminating the use of excessive amounts of outside air
www.energyinnovation.net33
CO2 sensor savings for Shoppers Drug Mart
1,050 stores – 4-5 sensors / store
Energy savings payback <2 Yrs
150 stores converted
Saving >30,000,000 kWh/yr
18% energy savings per store
34www.energyinnovation.net
Cinemark movie theaters CO2 sensor system
CO2 & dew point economizer controlin Southern California
15 theatres, 179 screens, 36,700 seats
Saves average of 35 kWh/Year or $5 per seat/year
Annual savings of $183,500
Annual energy savings – 1,284,500 kWh
35www.energyinnovation.net
Solar protection window film
Window Film can block up to 80% of solar
heat to reduce energy cost and increase comfort.
Heat is lowered up to 12°F in the space, reducing peak demand on HVAC.
36www.energyinnovation.net
Solar protection window film options to fit your needs
Visibly clear film reduces heat to 50% without changing appearance
Tinted film cut heat up to 80% reduce glare and provide tinted look
Reflective film reduce heat 80% with modern reflective look
Graffiti protection film coating protects windows against scratching
Security film prevents shattering of glass from explosion or attempted break-ins
www.energyinnovation.net37
CO sensor system
CO sensor systems with VFDs reduces 80% to 90% of the energy cost to operate exhaust fans in enclosed parking garages.
Instead of running fans during all hours of garage operation, the sensor/VFD system operates the fans at a low base level of ventilation and ramps up only as required if the sensors detect carbon monoxide.
This keeps air circulating and avoids turning fan motors on and off during the day.
38www.energyinnovation.net
Hotel room key card energy system
Reduces room energy costs 20% to 45% by controlling energy use when a room is unoccupied. When entering rooms, guests place the key card in an entry area slot to turn on HVAC, selected lighting and power outlets.
When a guest leaves the room and removes the keycard, HVAC, lighting and power outlets revert to energy saving levels set by management which maintains guest comfort.
39www.energyinnovation.net
Holiday Inn reduces energy cost with keycard energy control system
MADISON, Wis. (May 2005) – Reducing HVAC costs in unoccupied rooms, Holiday Inn and Suites in Madison, Wisconsin will save over $17,000 a year for its 157 guestrooms.
40% to 80% of a hotel’s energy costs is from heating and cooling guest rooms. It’s an important cost, which can be controlled by using guest room energy management.
“Energy costs represent a large operating expenditure in our industry, By installing these controls, we were able to lower our hotel’s energy costs, positively impacting our operating profit margins.”
When the guest leaves the room, the controls send a signal to the thermostat that relaxes the HVAC to a predetermined unoccupied set point. When the guests return, the system readjusts to meet guest comfort requirements. Guests control the temperature when they are in the room.
www.energyinnovation.net40
The Westin Convention Center- Pittsburgh reduces energy cost with keycard energy control system
“We installed the Energize Energy management system in May of 2003. The payback after installation for this system was 18 months. After 5 months it looks like the payback will be less than 12 months.”
“The guests find this system very easy to use and after some training from the front desk, they are completely satisfied.”
“The installation went smoothly and with any project this size the small amount of problems that we have had were handle very quickly.”
www.energyinnovation.net41
Solar Energy
Solar energy opportunities have evolved from the latest technology advances to provide greater application flexibility, lower costs, and the ability to upgrade for continuing technology advances.
Systems can be installed with no-capital-outlay under a Power Purchase Agreement (PPA).
Under the PPA, the solar company provides and owns the equipment. The host company pays only for the energy produced at a price expected to always be below the utility price.
www.energyinnovation.net42
Delta P pressure independent water flow control valve
Maintains optimum coil
performance in chilled water
systems by stabilizing water flow
through the coils regardless of
demand level.
43www.energyinnovation.net
Pressure independent variable primary flow
44www.energyinnovation.net
Pressure independent 2-way control valve
45www.energyinnovation.net
Diesel emergency generator heat pump
The diesel emergency generator heat pump takes over the function of a block heater to maintain standby temperatures of the diesel generator to save 70% to 80% of the energy cost.
The block heater typically maintains generator stand by temperature often between 900F and 1200F. The heat pump has an efficiency level 4 times greater than the block heater.
www.energyinnovation.net46
FANWALL system
Reduces energy cost to 50% versus large centrifugal and vaneaxial fans.
FANWALL replaces inefficient, noisy, vibrating, unreliable fans with a bank of high-efficiency fan modules with VFDs built into a fan wall.
Easily brought into fan the room, assembled into a “fan wall” and installed. Cuts sound and vibration, provides redundancy, great reliability and easy maintenance.
www.energyinnovation.net47
1. Big-picture objectives established for facility or company-wide cost reduction
2. Data collection and facility audit to identify broad range of opportunities
3. Analysis and specification of the most cost-effective energy saving options
4. Comprehensive report of opportunities with recommendations and economics
5. Complete requirements for all available utility and government incentives
6. Arrange and oversee installation completion by contractor network
7. Structure and arrange no-capital-outlay, savings-funded projects
www.energyinnovation.net48
The steps of an energy strategy
Tomorrow’s Energy Standards Today
Immediate action steps to reduce energy cost
Focus on the big picture of “what is possible” for energy savings and return on investment targets
Complete detailed assessment of facilities, develop and evaluate energy savings options, and economic analysis
Develop Opportunity Report of action and economics for one-stop, concept through completion energy strategy
www.energyinnovation.net49Tomorrow’s Energy Standards Today
Energy Innovation Group
The Pathway to Profit >>>
50
Energy Innovation Group, LLC
11965 Venice Blvd. Ste. 408
Los Angeles, CA 90066
Phone: 310-313-1917 Fax: 310-313-7605
www.energyinnovation.net
Tomorrow’s Energy Standards Today