Embed Size (px)
Citation preview
Enter the tolerance specification h10Enter the required size here 18
Upper LowerTolerance 0 -70
Specification limit 18.0000 17.9300
Prepared by : C Suresh & S Suresh - Mysore
READY RECKONER FOR TOLERANCE AS PER IS 919 - 1963 ( Values in Microns ) for SHAFTS
READY RECKONER FOR TOLERANCE AS PER IS 919 - 1963 for SHAFTS
Enter the tolerance specification H7Enter the required size here 100
Upper LowerTolerance 35 0
Specification limit 100.0350 100.0000
Prepared by : C Suresh & S Suresh - Mysore
READY RECKONER FOR TOLERANCE AS PER IS 919 - 1963 ( Values in Microns ) for HOLES
READY RECKONER FOR TOLERANCE AS PER IS 919 - 1963 for HOLES
![OPINION - cases.justia.comopinion contained an incorrect reference to Laura Johnson serving as cotrustee of-a foundation ... Duncan369 S.W.2d 917, 919 (Tex. 1963), [, is] the seminal](https://img.dokumen.tips/doc/110x75/5e7cc02b873b4b3d7c19f02d/opinion-cases-opinion-contained-an-incorrect-reference-to-laura-johnson-serving.jpg)
