14
INDOOR CRI85 TOKILUX EVO SERIES TokiLux EVO is easy-to-use indirect lighting. Fixtures can be trimmed, will conform to curves and LED modules are replaceable.  Wall Grazer and Kelvin Tuning fixtures can be provided for specific applications. TOKILUX EVO TOKILUX EVO WG (Wall Grazer) TOKILUX EVO KT (Kelvin Tuning) PRODUCT GUIDE

TOKILUX EVO SERIES - toki.co.jp

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

INDOORCRI85

TOKILUX EVO SERIES

TokiLux EVO is easy-to-use indirect lighting. Fixtures can be trimmed, will conform to curves and LED modules are replaceable.  Wall Grazer and Kelvin Tuning fixtures can be provided for specific applications.

TOKILUX EVOTOKILUX EVO WG (Wall Grazer)TOKILUX EVO KT (Kelvin Tuning)

PRODUCT GUIDE

TOKILUX EVO

TLX-EVO- KCatalog# Power Light unit Q'ty/run

TLX-EVO- ____K 1.5W/unit 2 to 64 units

Voltage =24VDCWattage =1.5W/unitWeight =Approx. 200g/mMaterial =Flat Cable : PVC

      LED Lamp:PCLead cable = 1.25mm²×2 L=0.5m

INDOOR24VDC

※ For proper air flow, the dimensions indicated are required to prevent heat build up. Please keep these guidelines in mind when using various optional parts. Other considerations are lighting effect and maintenance.

24VDC

0-10V / DMX

CRI 85

※ 1unit=75mm

LED Colors, lm

2400K : 110lm / unit 3500K : 135lm / unit

3000K : 135lm / unit

2700K : 130lm / unit 4000K : 140lm / unit

Lumen value per meter

(lm)

2400K 1463

2700K 1729

3000K 1796

3500K 1796

4000K 1862

Minimum Space Requirements

20

32

With mounting clip

20

22

With mounting base

It is possible to cut between each 75 mm module, and conform fixtures to curves. The modules are also replaceable. The LED pitch within each module is 15 mm creating a seamless lighting effect. An optional mounting base makes perfectly linear installations possible. It is also possible to combine curved and straight run on individual fixture lengths.

Mounting base

Mounting clip

Curved installationBeautiful seamlessindirect lighting

CUT OKBENDABLE

Happo-en GRACEDesign : Hashimoto Yukio Design Studio Inc.Lighting design : ICEPhoto : Nacasa & Partners Inc.

24K:2400K27K:2700K30K:3000K

35K:3500K40K:4000K

LED Color

1 PRODUCT GUIDE 2PRODUCT GUIDE

Specifications(mm)

18

20.4 30

12.2

13.8 13.8

43.7

L=(#of Light units -1)×75+50+41

TOKILUX EVO with mounting base

TOKILUX EVO, basic system

TOKILUX EVO with mounting clip

500

Red +

41 5075

Instructions

Using screws, install the mounting base, then snap the fixture in place.

※ The mounting base may be cut to length on the job site.

Mounting Base MC20-1.25m

Straight installation

Vertical or sloped position

For curved installations, attach mounting clips with screws at the bend point. TokiLux EVO may be installed horizontally or vertically.

Curve and vertical installation

Curve position

Mounting Clip EVO-CP/10

※ 10pcs per bag

Bend points require screws.

45°

135°

Mounting clip

Mounting base

Secure the upperLED unit with the mounting clip

50300 300

300

TLX-EVO-30K TLX-EVO-30K

(mm)(mm)

800

20001500

1000

20001500

1000

600mm

[ lx ]

2.7m

4m

100200

50

10002000

500

3m[ lx ]

1 PRODUCT GUIDE 2PRODUCT GUIDE

Foot Candle Summaries

Power Supplies

24VDC LED Driver

Tokistar’s LDR24-192 has two independent 96 watt outputs. The unit has wiring com-

partments for splicing on input and output leads, and can be connected directly to

conduit. The enclosure is suitable for wet locations and rated IP65.

Tokistar's LDR24-96 has a single 96 watt output.

(mm)

(mm)

LDR24-96 SpecificationsInput Range : 100~277VAC

Frequency Range : 50/60Hz

Output: 24VDC (+/- 3%)

Max. Output Current : 4.0A

Max. Output Power : 96W

Protection : Overload, Over voltage,

Short Circuit, Over Temperature

Working Temperature: -30°C~+50°C

Mechanical SpecificationsDimensions : 68 x 222 x 39mm

Weight : 998g

Enclosure Rating : Suitable for use in Dry,

Damp and Wet Locations/IP67 Rated

Mounting : Flange Mount

Safety StandardsUL 879, UL 8750, UL 1310 Class 2, TUV

EN60950-1, EN61347-1, EN61347-2-3 ind.

CAN/CSA C22.2, No. 223-M91, CE, IP67 Rated

LED Module Capacity1.5watt light units : 64 each

LDR24-192 SpecificationsInput Range : 100~277VAC

Frequency Range : 50/60Hz

Output : 24VDC (Adjustable +5% / -30%)

Max. Output Current : 8.0A (2 @ 4.0A)

Max. Output Power : 192W (2 @ 96W)

Protection: Overload, Overcurrent, Short Circuit

Operating Temperature : -25°C to +60°C

Mechanical SpecificationsDimensions : 115 x 312 x 61mm

Weight : 2.55Kg

Enclosure Rating : Nema 3/IP65

Mounting : Flange Mount

Connection : Knockouts for 1/2" Conduit

Safety StandardsUL 1012/1585, UL8750, UL Class 2 Wet

locations, UL48, cUL, CE, UL # : E342485

LED Module Capacity1.5watt light units : 128 each (64 per output)

TokiLux EVO series operates from Tokistar's 24VDC LED drivers. These Class 2

power supplies have a single or dual outputs limited to 96 watts/4 amps. The input

is universal ranging from 100 to 277VAC 50/60 Hz.

LDR24-192

LDR24-96

222 68

312 115

39

61

222 68

312 115

39

61

3 PRODUCT GUIDE 4PRODUCT GUIDE

1. Read all instructions completely before beginning installation.2. Turn off electricity before beginning installation.3. All wiring is to be performed by a qualified electrician.

4. Installation must comply with the National Electrical Code, or related applicable regulations.

5. Turn main supply to LED driver on only after all connections have been made and tested.

6. Use only LED drivers provided by Tokistar with the system.

PRECAUTIONS

Dimming

LC-1CH-MULTI Dimming System/24VDC

LC Dimming System/24VDC

Tokistar’s LC-1CH-MULTI Dimmer Pack is compatible

with industry-standard dimmers working on DMX or

0/1-10VDC protocol. In the manual mode, a preset light

level can be set without the use of an external dimmer.

This proprietary dimming system provides full-range dimming of LEDs from our LED drivers. The system components connect with

CAT5e cable. Up to 25 dimmer packs may be connected in series if the total length of all CAT5e cable does not exceed 50 meters

from the wall dimmer to the last dimmer pack. CAT5e cables are required to units.

DMX ModeIn this mode, dimmer packs are addressable and may be

used with any controller working on DMX protocol.

Up to 36 dimmer packs may be connected in series.

For applications exceeding 36 dimmer packs, a splitter is

required. Consult factory on details of DMX Splitters.

Analog Mode 0/1-10VDCFor operation from devices using 0/1-10VDC protocol, up

to 10 dimmer packs may be connected in series.

For applications exceeding 10 dimmer packs, an addi-

tional feed from the analog dimming device is required.

Manual ModeYou may select a light intensity at which the fixtures operate.

In this case, no external dimming device is required.

LC-1CH-MULTIMax. Load: 96W @ 24VDC

Environmental Rating : Dry Location/IP20

Dimensions : W40 x L90 x H20mm

Weight : 50g

Listing : ETL Listed/CE Certified

Operating Temperature: 0~+50°C

LC-DMRThe remote wall dimmer has a rotarydial and on/off switch. Power to the walldimmer is provided from the LED driverpowering the first dimmer pack. The unitinstalls in a single-gang box.Weight : 110gOperating Temperature : 0~+40°C

LC-1CH-DPEach dimmer pack receives a 24VDC inputfrom an LED driver and sends a PWM outputto the fixture. Logic input and output is communicated through CAT5e cable.Max. Load : 96W @ 24VDCDimensions : W89 x L103 x H36mmWeight : 110gOperating Temperature : 0~+40°C

Part #: LC-1CH-DP Each dimmer pack receives a 24 VDC input from an LED Driver and sends a PWM output to the fixture. Logic input and output is communicated through CAT5 cable. Max. Load: 96 watts @ 24 VDCDimensions: 1-1/2" x 3-1/2" x 4-1/16"

Part #: LC-DMR The remote wall dimmer has a rotary dial and on/off switch. Power to the wall dimmer is provided from the LED Driver powering the first dimmer pack. The unit installs in a single-gang box.

LC Dimming System/24 VDCThis proprietary dimming system provides full-range dimming of LEDs from our LED Drivers. The system components connect with CAT5 cable. Up to 25 dimmer packs may be connected in series if the total length of all CAT5 cable does not exceed 165 feet from the wall dimmer to the last dimmer pack. CAT5 cables are included with units.

Part #: LC-1CH-MULTITechnical Specifications:Max. Load: 96 watts @ 24 VDCEnvironmental Rating: Dry Location/IP20Dimensions: 3/4" x 1-3/4" x 3-1/2"Weight: 50g / 0.11 lbsListing: ETL Listed/CE CertifiedOperating Temperature: 0~+50ºC

Analog Mode 0/1-10 VDCFor operation from devices using 0/1-10 VDC protocol, up to 10 dimmer packs may be connected in series. For applications exceeding 10 dimmer packs, an additional feed from the analog dimming device is required.

DMX ModeIn this mode, dimmer packs are addressable and may be used with any controller working on DMX protocol. Up to 36 dimmer packs may be connected in series. For applications exceeding 36 dimmer packs, a splitter is required. Consult factory on details of DMX Splitters.

Manual ModeYou may select a light intensity at which the fixtures operate. In this case, no external dimming device is required.

LC-1CH-MULTI Dimming System/24 VDCTokistar’s LC-1CH-MULTI Dimmer Pack is compatible with industry-standard dimmers working on DMX or0/1-10 VDC protocol. In the manual mode, a preset light level can be set without the use of an external dimmer.

TOKISTAR LIGHTING | 11

PWM Signal

LC-DMR Signal to next Dimmer Pack

LED Driver24 VDC

Dimmer Pack

Fixture

Dimmer Pack

Fixture

DMX to next Dimmer Pack

LED Driver

24 VDCDMX In

0/1-10 VDC In

0/1-10 VDC to next Dimmer Pack

PWM Signal

Part #: LC-1CH-DP Each dimmer pack receives a 24 VDC input from an LED Driver and sends a PWM output to the fixture. Logic input and output is communicated through CAT5 cable. Max. Load: 96 watts @ 24 VDCDimensions: 1-1/2" x 3-1/2" x 4-1/16"

Part #: LC-DMR The remote wall dimmer has a rotary dial and on/off switch. Power to the wall dimmer is provided from the LED Driver powering the first dimmer pack. The unit installs in a single-gang box.

LC Dimming System/24 VDCThis proprietary dimming system provides full-range dimming of LEDs from our LED Drivers. The system components connect with CAT5 cable. Up to 25 dimmer packs may be connected in series if the total length of all CAT5 cable does not exceed 165 feet from the wall dimmer to the last dimmer pack. CAT5 cables are included with units.

Part #: LC-1CH-MULTITechnical Specifications:Max. Load: 96 watts @ 24 VDCEnvironmental Rating: Dry Location/IP20Dimensions: 3/4" x 1-3/4" x 3-1/2"Weight: 50g / 0.11 lbsListing: ETL Listed/CE CertifiedOperating Temperature: 0~+50ºC

Analog Mode 0/1-10 VDCFor operation from devices using 0/1-10 VDC protocol, up to 10 dimmer packs may be connected in series. For applications exceeding 10 dimmer packs, an additional feed from the analog dimming device is required.

DMX ModeIn this mode, dimmer packs are addressable and may be used with any controller working on DMX protocol. Up to 36 dimmer packs may be connected in series. For applications exceeding 36 dimmer packs, a splitter is required. Consult factory on details of DMX Splitters.

Manual ModeYou may select a light intensity at which the fixtures operate. In this case, no external dimming device is required.

LC-1CH-MULTI Dimming System/24 VDCTokistar’s LC-1CH-MULTI Dimmer Pack is compatible with industry-standard dimmers working on DMX or0/1-10 VDC protocol. In the manual mode, a preset light level can be set without the use of an external dimmer.

TOKISTAR LIGHTING | 11

PWM Signal

LC-DMR Signal to next Dimmer Pack

LED Driver24 VDC

Dimmer Pack

Fixture

Dimmer Pack

Fixture

DMX to next Dimmer Pack

LED Driver

24 VDCDMX In

0/1-10 VDC In

0/1-10 VDC to next Dimmer Pack

PWM Signal

Part #: LC-1CH-DP Each dimmer pack receives a 24 VDC input from an LED Driver and sends a PWM output to the fixture. Logic input and output is communicated through CAT5 cable. Max. Load: 96 watts @ 24 VDCDimensions: 1-1/2" x 3-1/2" x 4-1/16"

Part #: LC-DMR The remote wall dimmer has a rotary dial and on/off switch. Power to the wall dimmer is provided from the LED Driver powering the first dimmer pack. The unit installs in a single-gang box.

LC Dimming System/24 VDCThis proprietary dimming system provides full-range dimming of LEDs from our LED Drivers. The system components connect with CAT5 cable. Up to 25 dimmer packs may be connected in series if the total length of all CAT5 cable does not exceed 165 feet from the wall dimmer to the last dimmer pack. CAT5 cables are included with units.

Part #: LC-1CH-MULTITechnical Specifications:Max. Load: 96 watts @ 24 VDCEnvironmental Rating: Dry Location/IP20Dimensions: 3/4" x 1-3/4" x 3-1/2"Weight: 50g / 0.11 lbsListing: ETL Listed/CE CertifiedOperating Temperature: 0~+50ºC

Analog Mode 0/1-10 VDCFor operation from devices using 0/1-10 VDC protocol, up to 10 dimmer packs may be connected in series. For applications exceeding 10 dimmer packs, an additional feed from the analog dimming device is required.

DMX ModeIn this mode, dimmer packs are addressable and may be used with any controller working on DMX protocol. Up to 36 dimmer packs may be connected in series. For applications exceeding 36 dimmer packs, a splitter is required. Consult factory on details of DMX Splitters.

Manual ModeYou may select a light intensity at which the fixtures operate. In this case, no external dimming device is required.

LC-1CH-MULTI Dimming System/24 VDCTokistar’s LC-1CH-MULTI Dimmer Pack is compatible with industry-standard dimmers working on DMX or0/1-10 VDC protocol. In the manual mode, a preset light level can be set without the use of an external dimmer.

TOKISTAR LIGHTING | 11

PWM Signal

LC-DMR Signal to next Dimmer Pack

LED Driver24 VDC

Dimmer Pack

Fixture

Dimmer Pack

Fixture

DMX to next Dimmer Pack

LED Driver

24 VDCDMX In

0/1-10 VDC In

0/1-10 VDC to next Dimmer Pack

PWM Signal

3 PRODUCT GUIDE 4PRODUCT GUIDE

DMX Wiring DiagramDMX Console

Fixture

LED driver

DMX OutDMX In DMX Out

24VDC 24VDC LED driver

Dimmer Pack Dimmer Pack

Fixture

0/1-10VDC Wiring Diagram

Fixture

24VDC 24VDCLED driver LED driver

Dimmer Pack Dimmer Pack

Analog Dimmer

0/1-10VDC

0/1-10VDC

0/1-10VDC

Fixture

24VDC24VDCLED driver LED driver

Dimmer Pack Dimmer Pack

LC-DMR

LAN cable(CAT5e) LAN cable(CAT5e)

FixtureFixture

Signal Signal

5 PRODUCT GUIDE 6PRODUCT GUIDE

TOKILUX EVO WG

TLX-EVOWG- K Catalog# Power Light unit Q'ty/run

TLX-EVOWG- ____K 1.5W/unit 4 to 32 units

Voltage =24VDCWattage =1.5W/unitWeight =Approx. 410g/mMaterial =Flat Cable : PVC

      LED Lamp:PC     Aluminium extrusion:ALLead cable = 1.25mm²×2 L=0.5m

INDOOR24VDC

24VDC

0-10V / DMX

CRI 85

※ 1unit=75mm

Based on TokiLux EVO, the new EVO WG is a noteworthy addition to the series. The special lens has been refined to create a stunning grazing effect, and to highlight textured surfaces. An optional parallel louver can easily be attached after the fixture has been installed.

27K:2700K30K:3000K35K:3500K

LED Color

Special lens Parallel louver

This compact wall grazer provides quality light across an entire surface.

Option

EVOWG-PLVR Parallel Louver

※ This item is attached on site.

TOKILUX EVO WG

5 PRODUCT GUIDE 6PRODUCT GUIDE

※ For proper air flow, the dimensions indicated are required to prevent heat build up. Please keep these guidelines in mind when using various optional parts. Other considerations are lighting effect and maintenance.

LED Colors, lm

2700K : 115lm / unit

3500K : 115lm / unit

3000K : 115lm / unit

Lumen value per meter

(lm)

2700K 1533

3000K 1533

3500K 1533

Instructions

Minimum Space Requirements

30

30

30

30

30

30

Specifications

(mm)

43 4375

15

23

40 40

23

22.5

22.5

TOKILUX EVO WG with Parallel Louver (Option)

Cut off angle:50°

L=75× #of Light units +41

L=75× #of Light units +9

Foot Candle Summaries

80

TLX-EVOWG-30K

(mm)

[ lx ]

3m

4m

2.7m

14001000500200

300

10050

200

10050

20

Fixed Bracket Mounting Parallel LouverUsing screws attach brackets to the mounting surface, then insert the fixture.Brackets are suitable for use on both the floor and ceiling.

Screws

Fixture

Fixed Brackets

The louver readily snaps in place over the LED lens.Louvers can be attached after fixtures have been installed.

Parallel Louver

Parallel Louver EVOWG-PLVR

7 PRODUCT GUIDE 8PRODUCT GUIDE

Power Supplies

Tokistar’s LDR24-192 has two independent 96 watt outputs. The unit has wiring com-

partments for splicing on input and output leads, and can be connected directly to

conduit. The enclosure is suitable for wet locations and rated IP65.

(mm)

LDR24-96 SpecificationsInput Range : 100~277VAC

Frequency Range : 50/60Hz

Output: 24VDC (+/- 3%)

Max. Output Current : 4.0A

Max. Output Power : 96W

Protection : Overload, Over voltage,

Short Circuit, Over Temperature

Working Temperature: -30°C~+50°C

Mechanical SpecificationsDimensions : 68 x 222 x 39mm

Weight : 998g

Enclosure Rating : Suitable for use in Dry,

Damp and Wet Locations/IP67 Rated

Mounting : Flange Mount

Safety StandardsUL 879, UL 8750, UL 1310 Class 2, TUV

EN60950-1, EN61347-1, EN61347-2-3 ind.

CAN/CSA C22.2, No. 223-M91, CE, IP67 Rated

LED Module Capacity1.5watt light units : 64 each

LDR24-192 SpecificationsInput Range : 100~277VAC

Frequency Range : 50/60Hz

Output : 24VDC (Adjustable +5% / -30%)

Max. Output Current : 8.0A (2 @ 4.0A)

Max. Output Power : 192W (2 @ 96W)

Protection: Overload, Overcurrent, Short Circuit

Operating Temperature : -25°C to +60°C

Mechanical SpecificationsDimensions : 115 x 312 x 61mm

Weight : 2.55Kg

Enclosure Rating : Nema 3/IP65

Mounting : Flange Mount

Connection : Knockouts for 1/2" Conduit

Safety StandardsUL 1012/1585, UL8750, UL Class 2 Wet

locations, UL48, cUL, CE, UL # : E342485

LED Module Capacity1.5watt light units : 128 each (64 per output)

LDR24-192

222 68

312 115

39

61

24VDC LED Driver

Tokistar's LDR24-96 has a single 96 watt output.

(mm)

TokiLux EVO WG series operates from Tokistar's 24VDC LED drivers. These Class 2

power supplies have a single or dual outputs limited to 96 watts/4 amps. The input

is universal ranging from 100 to 277VAC 50/60 Hz.

LDR24-96

222 68

312 115

39

61

7 PRODUCT GUIDE 8PRODUCT GUIDE

1. Read all instructions completely before beginning installation.2. Turn off electricity before beginning installation.3. All wiring is to be performed by a qualified electrician.

4. Installation must comply with the National Electrical Code, or related applicable regulations.

5. Turn main supply to LED driver on only after all connections have been made and tested.

6. Use only LED drivers provided by Tokistar with the system.

PRECAUTIONS

Dimming

LC-1CH-MULTI Dimming System/24VDC

LC Dimming System/24VDC

Tokistar’s LC-1CH-MULTI Dimmer Pack is compatible

with industry-standard dimmers working on DMX or

0/1-10VDC protocol. In the manual mode, a preset light

level can be set without the use of an external dimmer.

This proprietary dimming system provides full-range dimming of LEDs from our LED drivers. The system components connect with

CAT5e cable. Up to 25 dimmer packs may be connected in series if the total length of all CAT5e cable does not exceed 50 meters

from the wall dimmer to the last dimmer pack. CAT5e cables are required to units.

DMX ModeIn this mode, dimmer packs are addressable and may be

used with any controller working on DMX protocol.

Up to 36 dimmer packs may be connected in series.

For applications exceeding 36 dimmer packs, a splitter is

required. Consult factory on details of DMX Splitters.

Analog Mode 0/1-10VDCFor operation from devices using 0/1-10VDC protocol, up

to 10 dimmer packs may be connected in series.

For applications exceeding 10 dimmer packs, an addi-

tional feed from the analog dimming device is required.

Manual ModeYou may select a light intensity at which the fixtures operate.

In this case, no external dimming device is required.

LC-1CH-MULTIMax. Load: 96W @ 24VDC

Environmental Rating : Dry Location/IP20

Dimensions : W40 x L90 x H20mm

Weight : 50g

Listing : ETL Listed/CE Certified

Operating Temperature: 0~+50°C

LC-DMRThe remote wall dimmer has a rotarydial and on/off switch. Power to the walldimmer is provided from the LED driverpowering the first dimmer pack. The unitinstalls in a single-gang box.Weight : 110gOperating Temperature : 0~+40°C

LC-1CH-DPEach dimmer pack receives a 24VDC inputfrom an LED driver and sends a PWM outputto the fixture. Logic input and output is communicated through CAT5e cable.Max. Load : 96W @ 24VDCDimensions : W89 x L103 x H36mmWeight : 110gOperating Temperature : 0~+40°C

Part #: LC-1CH-DP Each dimmer pack receives a 24 VDC input from an LED Driver and sends a PWM output to the fixture. Logic input and output is communicated through CAT5 cable. Max. Load: 96 watts @ 24 VDCDimensions: 1-1/2" x 3-1/2" x 4-1/16"

Part #: LC-DMR The remote wall dimmer has a rotary dial and on/off switch. Power to the wall dimmer is provided from the LED Driver powering the first dimmer pack. The unit installs in a single-gang box.

LC Dimming System/24 VDCThis proprietary dimming system provides full-range dimming of LEDs from our LED Drivers. The system components connect with CAT5 cable. Up to 25 dimmer packs may be connected in series if the total length of all CAT5 cable does not exceed 165 feet from the wall dimmer to the last dimmer pack. CAT5 cables are included with units.

Part #: LC-1CH-MULTITechnical Specifications:Max. Load: 96 watts @ 24 VDCEnvironmental Rating: Dry Location/IP20Dimensions: 3/4" x 1-3/4" x 3-1/2"Weight: 50g / 0.11 lbsListing: ETL Listed/CE CertifiedOperating Temperature: 0~+50ºC

Analog Mode 0/1-10 VDCFor operation from devices using 0/1-10 VDC protocol, up to 10 dimmer packs may be connected in series. For applications exceeding 10 dimmer packs, an additional feed from the analog dimming device is required.

DMX ModeIn this mode, dimmer packs are addressable and may be used with any controller working on DMX protocol. Up to 36 dimmer packs may be connected in series. For applications exceeding 36 dimmer packs, a splitter is required. Consult factory on details of DMX Splitters.

Manual ModeYou may select a light intensity at which the fixtures operate. In this case, no external dimming device is required.

LC-1CH-MULTI Dimming System/24 VDCTokistar’s LC-1CH-MULTI Dimmer Pack is compatible with industry-standard dimmers working on DMX or0/1-10 VDC protocol. In the manual mode, a preset light level can be set without the use of an external dimmer.

TOKISTAR LIGHTING | 11

PWM Signal

LC-DMR Signal to next Dimmer Pack

LED Driver24 VDC

Dimmer Pack

Fixture

Dimmer Pack

Fixture

DMX to next Dimmer Pack

LED Driver

24 VDCDMX In

0/1-10 VDC In

0/1-10 VDC to next Dimmer Pack

PWM Signal

Part #: LC-1CH-DP Each dimmer pack receives a 24 VDC input from an LED Driver and sends a PWM output to the fixture. Logic input and output is communicated through CAT5 cable. Max. Load: 96 watts @ 24 VDCDimensions: 1-1/2" x 3-1/2" x 4-1/16"

Part #: LC-DMR The remote wall dimmer has a rotary dial and on/off switch. Power to the wall dimmer is provided from the LED Driver powering the first dimmer pack. The unit installs in a single-gang box.

LC Dimming System/24 VDCThis proprietary dimming system provides full-range dimming of LEDs from our LED Drivers. The system components connect with CAT5 cable. Up to 25 dimmer packs may be connected in series if the total length of all CAT5 cable does not exceed 165 feet from the wall dimmer to the last dimmer pack. CAT5 cables are included with units.

Part #: LC-1CH-MULTITechnical Specifications:Max. Load: 96 watts @ 24 VDCEnvironmental Rating: Dry Location/IP20Dimensions: 3/4" x 1-3/4" x 3-1/2"Weight: 50g / 0.11 lbsListing: ETL Listed/CE CertifiedOperating Temperature: 0~+50ºC

Analog Mode 0/1-10 VDCFor operation from devices using 0/1-10 VDC protocol, up to 10 dimmer packs may be connected in series. For applications exceeding 10 dimmer packs, an additional feed from the analog dimming device is required.

DMX ModeIn this mode, dimmer packs are addressable and may be used with any controller working on DMX protocol. Up to 36 dimmer packs may be connected in series. For applications exceeding 36 dimmer packs, a splitter is required. Consult factory on details of DMX Splitters.

Manual ModeYou may select a light intensity at which the fixtures operate. In this case, no external dimming device is required.

LC-1CH-MULTI Dimming System/24 VDCTokistar’s LC-1CH-MULTI Dimmer Pack is compatible with industry-standard dimmers working on DMX or0/1-10 VDC protocol. In the manual mode, a preset light level can be set without the use of an external dimmer.

TOKISTAR LIGHTING | 11

PWM Signal

LC-DMR Signal to next Dimmer Pack

LED Driver24 VDC

Dimmer Pack

Fixture

Dimmer Pack

Fixture

DMX to next Dimmer Pack

LED Driver

24 VDCDMX In

0/1-10 VDC In

0/1-10 VDC to next Dimmer Pack

PWM Signal

Part #: LC-1CH-DP Each dimmer pack receives a 24 VDC input from an LED Driver and sends a PWM output to the fixture. Logic input and output is communicated through CAT5 cable. Max. Load: 96 watts @ 24 VDCDimensions: 1-1/2" x 3-1/2" x 4-1/16"

Part #: LC-DMR The remote wall dimmer has a rotary dial and on/off switch. Power to the wall dimmer is provided from the LED Driver powering the first dimmer pack. The unit installs in a single-gang box.

LC Dimming System/24 VDCThis proprietary dimming system provides full-range dimming of LEDs from our LED Drivers. The system components connect with CAT5 cable. Up to 25 dimmer packs may be connected in series if the total length of all CAT5 cable does not exceed 165 feet from the wall dimmer to the last dimmer pack. CAT5 cables are included with units.

Part #: LC-1CH-MULTITechnical Specifications:Max. Load: 96 watts @ 24 VDCEnvironmental Rating: Dry Location/IP20Dimensions: 3/4" x 1-3/4" x 3-1/2"Weight: 50g / 0.11 lbsListing: ETL Listed/CE CertifiedOperating Temperature: 0~+50ºC

Analog Mode 0/1-10 VDCFor operation from devices using 0/1-10 VDC protocol, up to 10 dimmer packs may be connected in series. For applications exceeding 10 dimmer packs, an additional feed from the analog dimming device is required.

DMX ModeIn this mode, dimmer packs are addressable and may be used with any controller working on DMX protocol. Up to 36 dimmer packs may be connected in series. For applications exceeding 36 dimmer packs, a splitter is required. Consult factory on details of DMX Splitters.

Manual ModeYou may select a light intensity at which the fixtures operate. In this case, no external dimming device is required.

LC-1CH-MULTI Dimming System/24 VDCTokistar’s LC-1CH-MULTI Dimmer Pack is compatible with industry-standard dimmers working on DMX or0/1-10 VDC protocol. In the manual mode, a preset light level can be set without the use of an external dimmer.

TOKISTAR LIGHTING | 11

PWM Signal

LC-DMR Signal to next Dimmer Pack

LED Driver24 VDC

Dimmer Pack

Fixture

Dimmer Pack

Fixture

DMX to next Dimmer Pack

LED Driver

24 VDCDMX In

0/1-10 VDC In

0/1-10 VDC to next Dimmer Pack

PWM Signal

DMX Wiring DiagramDMX Console

Fixture

LED driver

DMX OutDMX In DMX Out

24VDC 24VDC LED driver

Dimmer Pack Dimmer Pack

Fixture

0/1-10VDC Wiring Diagram

Fixture

24VDC 24VDCLED driver LED driver

Dimmer Pack Dimmer Pack

Analog Dimmer

0/1-10VDC

0/1-10VDC

0/1-10VDC

Fixture

24VDC24VDCLED driver LED driver

Dimmer Pack Dimmer Pack

LC-DMR

FixtureFixture

Signal Signal

LAN cable(CAT5e) LAN cable(CAT5e)

9 PRODUCT GUIDE 10PRODUCT GUIDE

TOKILUX EVO KT

TLX-EVO-KT

Voltage =24VDCWattage =1.5W/unitWeight =Approx. 200g/mMaterial =Flat Cable : PVC

      LED Lamp:PCLead cable = 1.25mm²×2 L=0.5m

※ 1unit=75mm

Dimming and changing the color temperature from 2500K to 4000K is easily accomplished. This is useful in creating the most comfortable environment possible. The dedicated control circuit keeps the amount of light constant regardless of color temperature. As with TokiLux, EVO can be installed in confined spaces.

2500K~4000K Kelvin Tuning

LED Color

Any color combination between 2500K and 4000K can be tuned in.

Catalog# Power Light unit Q'ty/run

TLX-EVO-KT 1.5W/unit 2 to 64 units

Kelvin Tuning

2500K

※ Dimmed ※ Dimmed

4000K

With two LEDs unique to EVO KT, the color temperature can be readily changed.

Changes in color temperature

2500K 4000K

INDOOR24VDC

24VDC

0-10V / DMX

CRI 85

CUT OKBENDABLE

TOKILUX EVO KT

18

20.4 30

12.2

13.8 13.8

43.7

L=(#of Light units -1)×75+50+41

TOKILUX EVO KT with mounting base TOKILUX EVO KT with mounting clip

500

Red +

41 5075

9 PRODUCT GUIDE 10PRODUCT GUIDE

Lumen value per meter

(lm)

2500K 1266

3000K 1360

4000K 1466

※ For proper air flow, the dimensions indicated are required to prevent heat build up. Please keep these guidelines in mind when using various optional parts. Other considerations are lighting effect and maintenance.

Minimum Space Requirements

20

32

With mounting clip

20

22

With mounting base

LED Colors, lm

2500K〜4000K : 95〜110lm/unit

Foot Candle Summaries

50300

TLX-EVO-KT

(mm)

[ lx ]

2.7m

4m

50100

1020

10002000

500200

3m

At 4000K

Specifications(mm)

Instructions

Using screws, install the mounting base, then snap the fixture in place.

※ The mounting base may be cut to length on the job site.

Mounting Base MC20-1.25m

Straight installation

Vertical or sloped position

For curved installations, attach mounting clips with screws at the bend point. TokiLux EVO KT may be installed horizontally or vertically.

Curve and vertical installation

Curve position

Mounting Clip EVO-CP/10

※ 10pcs per bag

Bend points require screws.

45°

135°

Mounting clip

Mounting base

Secure the upperLED unit with the mounting clip

11 PRODUCT GUIDE 12PRODUCT GUIDE

Power Supply / Dimming System

LED Driver

LDR24-96

SPECIFICATIONSInput Range: 100~277VAC

Frequency Range: 50/60 Hz

Output: 24VDC (+/- 3%)

Max. Output Current: 4.0A

Max. Output Power: 96W

Protection: Overload, Over voltage,

Short Circuit, Over Temperature

Operating Temperature: -30°C~+50°C

Mechanical SpecificationsDimensions: 68 x 222 x 39mm

Weight: 998g

Enclosure Rating: Suitable for use in Dry,

Damp and Wet Locations/IP67 Rated

Mounting: Flange Mount

Safety StandardsUL 879, UL 8750, UL 1310 Class 2,TUV

EN60950-1, EN61347-1, EN61347-2-3 ind.

CAN/CSA C22.2, No. 223-M91, CE, IP67 Rated

Light Unit Capacity1.5 watt Light Units: 64 each

222 68

39

(mm)

TokiLux EVO KT series operates from Tokistar's 24VDC LED driver. The Class 2

power supply has a single output limited to 96 watts/4 amps. The input is universal

ranging from 100 to 277VAC 50/60 Hz.

11 PRODUCT GUIDE 12PRODUCT GUIDE

1. Read all instructions completely before beginning installation.2. Turn off electricity before beginning installation.3. All wiring is to be performed by a qualified electrician.

4. Installation must comply with the National Electrical Code, or related applicable regulations.

5. Turn main supply to LED driver on only after all connections have been made and tested.

6. Use only LED drivers provided by Tokistar with the system.

PRECAUTIONS

This proprietary dimming system provides the ability to tune in a kelvin

temperature with one slide, and full-range dimming of the selected choice

with the other. The LC-KT-DMR Wall Dimmer connects to one LC-EVOKT-

SLV Dimmer Pack. Up to 32 LC-EVOKT-EXT Dimmer Packs may be con-

nected in series if the total length of all CAT5e cable does not exceed

50m from the dimmer pack (LC-EVOKT-SLV) to the last dimmer pack

(LC-EVOKT-EXT). CAT5e cables are required to units.

KT Dimming System

Fixture

Max 64 units

Max 64 units

Max 64 units

LC-KT-DMR

LC-EVOKT-SLV

LC-EVOKT-EXT

LC-EVOKT-EXT

Next LC-EVOKT-EXT

Up to 32 units can be connected,including the LC-EVOKT-SLV.

Fixture

Fixture

24VDC

24VDC

24VDC

LED driver

LED driver

LED driver

LAN (CAT5e)

Weight : 190gOperating Temperature : 0~+40°C

Wall DimmerLC-KT-DMR

Power input : 24VDCPower output : 24VDC 5AWeight : 350gDimensions : W98×L143×H34mm

Dimmer PackLC-EVOKT-SLV

Power input : 24VDCPower output : 24VDC 5AWeight : 340gDimensions : W98×L143×H34mm

Dimmer PackLC-EVOKT-EXT

2F JS Progre, 4-1-23, Heiwajima, Ota-ku, Tokyo 143-0006, Japan

TEL : +81-3-5763-6121 FAX : +81-3-5763-6130

www.toki.co.jp

2021.7 Ver.1