Simply put, there are many roofing installation needs where

even the best 30# Saturated Felt in the world is not designed for

the long exposure and toughness requirements provided by a

synthetic woven fabric product. Tech Wrap will always

be the most common underlayment product for use when the

job is being considered.

Tech Wrap Synthetic Underlayment is an inorganic, high strength woven fabric based roof systemcomponent appropriate for use in virtually all steep slope roof covering systems. Tech Wrap is fully compatible with asphalt shingles, metal roof coverings, Clay Tile, Slate, Concrete Tiles, Wood Shingles and Shakes or any other code approved, steep slope roof covering. TheUL Classification demonstrates conformance to criticalfire testing requirements. Tech Wrap is designed to provide for the lifetime need of an underlayment, offeringwater-shedding redundancy within the roof system whileprotecting the structure from water damage.

Tech Wrap is constructed of a light weight, extremely strong,

woven polypropylene fabric, with UV and water resistive coatings

and packaged for convenience in 10 square rolls weighing less

than 27 lbs each. Tech Wrap is unaffected by exposure to water

and sunlight for at least 6 months - exactly what is needed to

survive those special needs jobs.

Features:High tear strength6-month min. UV resistanceHigh coefficient of frictionHigh tear strengthPrinted lay-up linesHigh burst strength10 sq. roll size27 lbs. per roll

Benefits:Safer to walk on, holds fastenersMaintains integrity of performanceDoes not absorb waterGood walking tractionResists high wind blow-offsEasy alignment on roofResists fastener pull throughMore coverage, less laborEasier and safer to handleAvailable 1 pallet at a time

S y n t h e t i c U n d e r l a y m e n t

T E C H - W R A P UL -300

ROBETEX, inc.

tech

-wra

p-300

synt

heti

c ro

ofin

g un

derl

ayme

ntby

Rob

etex

, inc

TM

TM

Be Green.

The green is in us.

“BUILDING BETTERPROTECTION FOR LIFE”

robetex@windstream.net

Seal andInsulatewith

LEARN MORE ATenergystar.gov ENERGY STAR

Distributed by: BEST MATERIALS LLC, Phoenix AZPh: 800-474-7570, 602-272-8128 Fx: 602-272-8014 www.BestMaterials.com Email: Sales@BestMaterials.com

Tech WrapTech Wrap 300

“BUILDING BETTERPROTECTION FOR LIFE”

Green starts with you.

A. Roll width 48 x 250- PrintedB. Fabric weight is 3.5 oz/sq ydC. *Anti-slip engineered walking and face surface (2 sides)D. Nail Sealability ASTM D 1970 -- Passed 7.9E. Water Transmission. ASTM D 4869 -- Passed Water Permeance ASTM E 96-00 .05 permsF. Pliability ASTM D 1970 PassedG.Tensile Strength ASTM D 751-95 Warp 96 pounds Fill 116 poundsH. Trapezoid Tear Strength ASTM D 226 Warp 58 pounds Fill 77 poundsI. Water Ponding -- Passed AC 48J. UV Resistance 6 Months.K. Fire Rating UL Class A ASTM E108 PassedL. Limited Warranty -30 YearsM. Coefficient of Friction -- Static per side Test Standard CGSB 75.1 Grey side (ftf)stf) .815/.044 Black side (ftf/stf) .424/.304N. Coefficient of Friction -- Kinetic Grey side (ftf)stf) .981/.505 Black side (ftf/stf) .361/.319

The following testing data was prepared through a controlled testing environment by ProfessionalTesting Laboratories. Professional Testing Laboratories is accredited through NVLAP, TheUnited States Department of Commerce National Institute of Standards and Technology. Allsynthetic roof under layments meet or exceed testing critieria of the National buidling codes andICC AC 207, AC 188 and AC 48. Tech-Wrap 150, 300 and Tech-Wrap Ultimate are registeredtrademarks of Robetex, Inc building products. Tech wrap is available as a private label product.*Please refer to product warranty disclaimer*

Seal andInsulatewith

LEARN MORE ATenergystar.gov ENERGY STAR