LINDA ALLEN

Account Manager

cell 480.773.3601

email lallen@tlclabel.com

1495 E. Baseline Road

Suite #101

Gilbert, Arizona 85233

Founded in 1984, provides flexographic label solutions for

companies in Arizona, the Southwestern United States and in

Mexico. In July 2014 TLC completed our new 55,000 square

foot facility in Gilbert to help facilitate our growth.

Our goal is to be the premier label company in the Southwest.

We hope to achieve this goal by partnering with companies

such as yours to provide cost effective quality solutions to

your labeling needs.

QR CODE PRINTING

VARIABLE CODE PRINTING

EQUIPMENT CAPABILITIES

SUPPORTED CODES AND VARIABLE DATA

• Consecutive Numbering

• (VDP) Variable Data Printing

• 1 D UPC Barcodes (UPC A), Generic Inventory Codes

• GS1 DataBar Stacked

• Data Matrix Codes

EQUIPMENT

• Flexo Graphic Presses

• Finishing Equipment

• Digital Press LINDA ALLEN

Account Manager

cell 480.773.3601

email lallen@tlclabel.com

1495 E. Baseline Road

Suite #101

Gilbert, Arizona 85233

1.866.514.8420

phone 480.968.5686

fax 480.968.5896

www.tlclabel.com

CONSECUTIVE NUMBERING

Basic Fonts Available. Any number or numbers that run in sequence.

ex: 10000 to 19999

VARIABLE DATA PRINTING (VDP)

A form of on demand printing in which elements such as text, graphics and images may be changed from one Printed piece to the next, without stopping or slowing down the printing process and using information from a database or external file. For example, the same basic layout can be printed with a different name and address on each label.

1 D UPC BARCODES (UPC A), GENERIC INVENTORY CODES

This lined Barcode is an optical machine-readable representation of data, which shows certain data on certain products. This type of Barcode can be read with a standard optical scanner or Barcode reader.

GS1 DATABAR STACKED

GS1 DataBar Stacked Omnidirectional is designed to condense the GTIN information into a more compact and square barcode suitable for use on smaller packages (such as the labels on fresh produce).

DATA MATRIX CODES & QR CODES

A Data Matrix code is a two-dimensional matrix barcode consisting of black and white “ceIIs” or modules arranged in either a square or rectangular pattern. The information to be encoded can be text or raw data. Usual data size is from a few bytes up to 2 kilobytes. The length of the encoded data depends on the symbol dimension used. Error correction codes are added to increase symbol strength: even if they are partially damaged, they can still be read. A Data Matrix symbol can store up to 2,335 alphanumeric characters

HARVESTMARK CODES

TLC Label Co. is a Certified HarvestMark partner that prints a unique HarvestMark code. When a farmer harvests a crop, or a packer selects product to send to customers, they upload key data to HarvestMark. That information is linked to a unique HarvestMark Code on the label. When you trace the Code at HarvestMark.com, you instantly receive the traceability information on that product, like where it was grown and whether it’s subject to a recall. You can also find out more, like pictures of the farm, or the story behind the farmer, give feedback about the product you purchased, and discover nutrition information, and recipes.

Bottom portion of label is static, name, number and state are variable.

GS1 Data Bar Stacked can only be scanned by an omnidirectional scanner.

Medina, Alfredo713-059 CA

J F M A M J

1(WK) 2 3 4 5

J A S O N D

UPC A

CODE 39

EAN 13

PRESS CAPABILITIES

FINISHING CAPABILITIES

PRESS #1

17” MarkAndy6 Colors5 Tooling stationssheeter, turnbar2 Perf/Slitter wheel stationsDual unwind - 1 Glue unitPrinting width 17”

PRESS #2

16” AlliedGear7 Colors - 1 UV Capable5 Tooling stationslamination, sheeter, turn bar2 Perf/Slitter wheel stationsDual unwind - 1 Glue unitPrinting width 16”

PRESS #3

13” DieMaster1 Color, Digital Finisher3 Tooling stationsLaminationPrinting width 13”

PRESS #4

750 Webtron5 Colors - 1 UV Capable4 Tooling Stationslamination, turn barPrinting width 7 1/2”

PRESS #5

650 Webtron5 Colors4 Tooling Stationslamination, sheeter, turn barPrinting width 6 1/2”

PRESS #6

Jetrion 4000, Digital4 color processVariable data, consecutive numbersBarcodes, 1 D, 2D, Omni, Brand Coding, etc.Printing width 5 1/2”

PRESS #7

10” MarkAndy8 Colors - 1 UV capable4 Tooling Stations, Cold Foillamination, sheeter, turn barPrinting width 10”

PRESS #8

10” MarkAndy8 Colors - 2 UV Capable4 Tooling Stationslamination, turnbar, plow folder, corona treaterPrinting width 10”

PRESS #9

13” MarkAndy10 Colors - 4 UV Capable4 Tooling Stationslamination, turnbar, digital print variable dataPrinting width 13”

1 16” Arpeco

1 13” Arpeco

5 Web Techniques Table tops (3 wI slitters)

2 Zebra 140xIlll

(Thermal Printers)

1 Model T - 14 - 8 Shrink Tunnel

LINDA ALLEN

Account Manager

cell 480.773.3601

email lallen@tlclabel.com

1495 E. Baseline Road

Suite #101

Gilbert, Arizona 85233

1.866.514.8420

phone 480.968.5686

fax 480.968.5896

www.tlclabel.com

LIFT-OFF & PEEL-UP HINGE LABELS

LIFT-OFF TRI-IEVEL LABEL

Coupon base stock with coated material converted on top, ie.: Film, Bopp, etc. There are three printed sides on this label. The first side printed, (mirror image) is the adhesive side of the Coupon base stock, (up to one color max). This is the part of the label that is left behind on the product. The second side printed, (mirror image) is the top of the coupon base stock, (up to two colors max). This is the back side of the Lift-off label. The third and final side printed is the face material that has been converted on top of the coupon base stock, (up to five colors plus varnish max). This is the front side of the Lift-off label.

LIFT-OFF STANDARD LABEL

Coupon base stock with any paper or film material converted on top. There are two printed sides on this label. The first side printed, (mirror image) is the top of the coupon base stock, (up to three colors max). This is the back side of the Liftoff label. The second and final side printed is the face material that has been converted on top of the coupon base stock, (up to five colors plus varnish max). This is the front side of the Lift-off label.

DUAL ADHESIVE HINGE LABEL

The material is made with two different adhesives, one side with permanent and the other side with removable, (specific to the size break requested). There are two printed sides on this label. The first side printed is the removable adhesive side of the material, (one color max). This is the back side of the label you read when pulled up. The second and final side printed is the face of the material, (up to six colors plus varnish or seven colors plus lamination). This is the front side of the Dual Adhesive Hinge Label.

LINDA ALLEN

Account Manager

cell 480.773.3601

email lallen@tlclabel.com

1495 E. Baseline Road

Suite #101

Gilbert, Arizona 85233

1.866.514.8420

phone 480.968.5686

fax 480.968.5896

www.tlclabel.com

PDF FILE

FONTS

IMAGE AND RESOLUTION

FINAL ART PREP

Please email a high resolution PDF file. (CMYK, 300dpi)

• Convert text to outline to avoid font conflicts and reflows. (Select text: Menu Bar, Type, Create Outlines)

• Include all fonts.• Post Script Fonts and TrueType Fonts are preferred.

Avoid Multiple Master Fonts.• Use true bold and italic fonts. Do not applying bold and

italic within the application program.

• Include 1/16” bleed. (Bleed is extra image that will be cut off in the finishing process of the label.)

• Live Area is 1/16” away from trim. (Live Area is the area where text and images are safe from being cut off.) (Trim is finished cut size of the label.)

• Include a printed copy of files.• Use PMS color designations.• Use 100% black. Do not use rich black. (Rich Black is 100%

black with some cyan, magenta and yellow included.)• E-mail files. TLC also accepts CD’s, DVD’s and thumb drives.

To help assure the proper reproduction of customer supplied art files, we have put together a list of Artwork Guidelines that will make preparing your files for output simple & complete.

Our goal is to be the premier label company in the Southwest We hope to achieve this goal by partnering with companies such as yours to provide cost effective, quality solutions to your labeling needs. Should you require any further information, please feel free to contact us at 480-968-5686.

ARTWORK GUIDELINES

• Embed all images in Illustrator. • Include embedded images.• Use TIFF and EPS formats. JPEG, GIF and BMP files are

not desirable and color shifts may occur.• Images should be in CMYK mode. Images in RGB mode are

not desirable and color shifts may occur.• Black and White images should be in Gray Scale mode.• Save all images at 300dpi or above. Images that are 72dpi

are low resolution and the print quality will be poor.• Crop, rotate and mask images in Photoshop. Masked

images in Illustrator are ok.

Green Line is Bleed.Art from the green line to the red line will be trimmed off.

Red Line is Trim.This is the actual finishedsize of the label.

Blue Line is Live Area.Important text and art should be inside the live area.

1/16” 1/16”

LINDA ALLEN Account Manager

cell 480.773.3601 email lallen@tlclabel.com1495 E. Baseline Road, Suite #101, Gilbert, Arizona 85233

1.866.514.8420 phone 480.968.5686 fax 480.968.5896 www.tlclabel.com