Upload
others
View
17
Download
0
Embed Size (px)
Citation preview
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 1/36
TRƯỜNG ĐH CÔNG NGHIỆP TP. HỒ CHÍ MINH
TRUNG TÂM THÔNG TIN – THƯ VIỆN
TIÊU CHUẨN MỚI THÁNG 8/2018
Tiêu chuẩn – Quy chuẩn – Văn bản kỹ thuật đo lường Việt Nam ................................................................... 4
Cao su và chất dẻo ................................................................................................................................................ 4
Công nghệ dệt may và da ..................................................................................................................................... 4
Công nghệ thực phẩm .......................................................................................................................................... 5
Công nghệ thực phẩm - Dầu mỡ ăn ..................................................................................................................... 6
Công nghệ thực phẩm - Gia vị. Phụ gia thực phẩm ............................................................................................ 6
Công nghệ thực phẩm - Thịt, sản phẩm thịt ........................................................................................................ 7
Công nghệ thực phẩm – Thủy sản ....................................................................................................................... 7
Công nghệ thực phẩm – Đồ uống ........................................................................................................................ 7
Công nghệ chế biến gỗ - Gỗ dán .......................................................................................................................... 8
Dầu mỏ .................................................................................................................................................................. 8
Điện tử - Quang điện ............................................................................................................................................ 8
Đo lường và phép đo ............................................................................................................................................ 8
Đường sắt .............................................................................................................................................................. 8
Giấy ....................................................................................................................................................................... 8
Phụ tùng đường ống và đường ống ...................................................................................................................... 8
Khoáng sản kim loại và tinh quặng ..................................................................................................................... 9
Khai thác mỏ và khoáng sản - Than .................................................................................................................... 9
Luyện kim - Kim loại màu ................................................................................................................................... 9
Môi trường – An toàn bức xạ ............................................................................................................................. 10
Môi trường – An toàn lao động. Vệ sinh công nghiệp ...................................................................................... 10
Môi trường – Bảo vệ môi trường ....................................................................................................................... 10
Môi trường - Chất lượng không khí ................................................................................................................... 11
Môi trường - Chất lượng nước ........................................................................................................................... 11
Môi trường - Chất thải ........................................................................................................................................ 11
Môi trường - Ecgônômi (công thái học) ............................................................................................................ 11
Môi trường - Hệ thống cảnh báo và báo động ................................................................................................... 12
Môi trường - Phòng cháy ................................................................................................................................... 12
Môi trường - Thiết bị bảo vệ .............................................................................................................................. 12
Nông nghiệp ....................................................................................................................................................... 12
Nông nghiệp – Phân bón .................................................................................................................................... 13
Sơn và chất màu ................................................................................................................................................. 13
Thiết bị điện gia dụng ......................................................................................................................................... 14
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 2/36
Thiết bị giải trí – Đồ chơi trẻ em ........................................................................................................................ 14
Vi sinh vật ........................................................................................................................................................... 14
Vấn đề chung. Thuật ngữ. Tiêu chuẩn hóa. Tư liệu .......................................................................................... 15
Vật liệu xây dựng ............................................................................................................................................... 15
Viễn thông - Dịch vụ di động ............................................................................................................................. 15
Xây dựng dân dụng ............................................................................................................................................ 15
Tiêu chuẩn nước ngoài ......................................................................................................................................... 15
Bao gói và phân phối hàng hóa .......................................................................................................................... 15
Cao su và chất dẻo .............................................................................................................................................. 16
Chế tạo ................................................................................................................................................................ 19
Chế tạo – Kỹ thuật hàn ....................................................................................................................................... 19
Chế tạo – Máy công cụ ....................................................................................................................................... 19
Chế tạo – Xử lý bề mặt và mạ ............................................................................................................................ 19
Công nghệ ảnh .................................................................................................................................................... 19
Công nghệ chăm sóc sức khỏe ........................................................................................................................... 20
Công nghệ dệt may và da ................................................................................................................................... 20
Công nghệ hóa chất ............................................................................................................................................ 21
Công nghệ thông tin ........................................................................................................................................... 21
Công nghệ thực phẩm ........................................................................................................................................ 23
Dầu mỏ ................................................................................................................................................................ 23
Dịch vụ. Tổ chức, quản lý và chất lượng công ty.............................................................................................. 24
Điện tử ................................................................................................................................................................ 25
Đo lường và phép đo .......................................................................................................................................... 25
Đóng tàu và kết cấu tàu thủy .............................................................................................................................. 25
Hệ thống truyền dẫn chất lỏng ........................................................................................................................... 26
Máy thông gió. Quạt ........................................................................................................................................... 26
Phụ tùng đường ống và đường ống .................................................................................................................... 26
Thiết bị chứa chất lỏng ....................................................................................................................................... 26
Hệ thống và kết cấu cơ khí công dụng chung - Chi tiết lắp xiết ....................................................................... 27
Hệ thống và kết cấu cơ khí công dụng chung - Ổ đỡ ........................................................................................ 27
Khai thác mỏ và khoáng sản .............................................................................................................................. 27
Kỹ thuật điện - Cấu kiện thiết bị điện ................................................................................................................ 27
Kỹ thuật điện - Dây và cáp điện ......................................................................................................................... 27
Kỹ thuật điện - Phụ kiện điện ............................................................................................................................. 28
Kỹ thuật điện - Thiết bị điện để làm việc trong điều kiện đặc biệt ................................................................... 29
Kỹ thuật điện - Vật liệu từ .................................................................................................................................. 29
Kỹ thuật máy bay và tàu vũ trụ .......................................................................................................................... 29
Luyện kim ........................................................................................................................................................... 30
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 3/36
May mặc - Giày .................................................................................................................................................. 30
Môi trường - An toàn bức xạ ............................................................................................................................. 30
Môi trường - Bảo vệ môi trường ........................................................................................................................ 30
Môi trường - Chất lượng đất .............................................................................................................................. 31
Môi trường - Chất lượng không khí ................................................................................................................... 31
Môi trường - Chất lượng nước ........................................................................................................................... 31
Môi trường - Chất thải ........................................................................................................................................ 32
Môi trường - Phòng cháy ................................................................................................................................... 32
Môi trường - Phòng chống hàng nguy hiểm ...................................................................................................... 32
Môi trường - Thiết bị bảo vệ .............................................................................................................................. 32
Năng lượng và truyền nhiệt - Năng lượng hạt nhân .......................................................................................... 32
Năng lượng và truyền nhiệt - Năng lượng mặt trời ........................................................................................... 32
Năng lượng và truyền nhiệt nói chung .............................................................................................................. 33
Nông nghiệp ....................................................................................................................................................... 33
Phương tiện giao thông đường bộ ...................................................................................................................... 33
Sơn và chất màu ................................................................................................................................................. 33
Thiết bị gia dụng và thương mại giải trí. Thể thao ............................................................................................ 33
Thử nghiệm ......................................................................................................................................................... 34
Đồ gốm ............................................................................................................................................................... 34
Thủy tinh ............................................................................................................................................................. 34
Vi sinh vật ........................................................................................................................................................... 34
Vấn đề chung. Thuật ngữ ................................................................................................................................... 34
Vật liệu xây dựng và xây dựng nhà ................................................................................................................... 35
Viễn thông. Kỹ thuật âm thanh và hình ảnh ...................................................................................................... 36
Xây dựng dân dụng ............................................................................................................................................ 36
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 4/36
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
Tiêu chuẩn – Quy chuẩn – Văn bản kỹ thuật đo lường Việt Nam
Cao su và chất dẻo Trở về đầu trang
1 TCVN 11993:2017 Chất dẻo. Xác định tính chất nén 25
2
TCVN 11994-1:2017 Chất dẻo. Phương pháp phơi nhiễm với nguồn
sáng phòng thử nghiệm. Phần 1: Hướng dẫn
chung
38
3
TCVN 11994-2:2017 Chất dẻo. Phương pháp phơi nhiễm với nguồn
sáng phòng thử nghiệm. Phần 2: Đèn hồ quang
xenon
23
4
TCVN 11994-3:2017 Chất dẻo. Phương pháp phơi nhiễm với nguồn
sáng phòng thử nghiệm. Phần 3: Đèn huỳnh
quang UV
25
5
TCVN 11994-4:2017 Chất dẻo. Phương pháp phơi nhiễm với nguồn
sáng phòng thử nghiệm. Phần 4: Đèn hồ quang
cacbon ngọn lửa hở
18
6 TCVN 11995:2017 Chất dẻo. Xác định độ bền va đập kéo 22
7 TCVN 12010:2017 Cao su. Hướng dẫn sử dụng thiết bị đo lưu hoá 30
8
TCVN 12011-3:2017 Cao su. Xác định hàm lượng kim loại bằng
phương pháp quang phổ hấp thụ nguyên tử.
Phần 3: Xác định hàm lượng đồng
18
9
TCVN 12011-4:2017 Cao su. Xác định hàm lượng kim loại bằng
phương pháp quang phổ hấp thụ nguyên tử.
Phần 4: Xác định hàm lượng mangan
18
10 TCVN 10229:2017 Thay
thế: TCVN 10229:2013
Cao su lưu hoá hoặc nhiệt dẻo. Thử nghiệm độ
cứng. Giới thiệu và hướng dẫn
11
11 TCVN 2752:2017 Thay thế:
TCVN 2752:2013
Cao su lưu hoá hoặc nhiệt dẻo. Xác định sự tác
động của chất lỏng
36
12
TCVN 6090-2:2017 Thay
thế: TCVN 6090-2:2013
Cao su chưa lưu hóa. Phương pháp sử dụng
nhớt kế đĩa trượt. Phần 2: Xác định các đặc
tính tiền lưu hóa
12
13
TCVN 6090-3:2017 Thay
thế: TCVN 6090-3:2013
Cao su chưa lưu hóa. Phương pháp sử dụng
nhớt kế đĩa trượt. Phần 3: Xác định giá trị
Mooney Delta đối với SBR trùng hợp nhũ
tương, chứa dầu, không có bột màu
11
Công nghệ dệt may và da Trở về đầu trang
14 TCVN 12059:2017 Thảm. Xác định lực rút nhung 9
15 TCVN 12060:2017 Thảm trải sàn dệt. Đánh giá sự thay đổi ngoại
quan
12
16 TCVN 12061:2017 Thảm trải sàn đàn hồi. Yêu cầu cho thảm trải
sàn cao su có lót
12
17 TCVN 12062:2017 Thảm trải sàn đàn hồi. Yêu cầu cho thảm trải
sàn cao su không có lót
12
18 TCVN 12063:2017 Thảm trải sàn đàn hồi, dệt và laminate. Phân
loại
7
19 TCVN 12064:2017 Thảm trải sàn dệt. Xác định điện trở 9
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 5/36
20 TCVN 12065:2017 Thảm trải sàn dệt. Xác định độ bền tách lớp 8
21 TCVN 12066:2017 Thảm trải sàn laminate. Các yêu cầu 13
22 TCVN 12067:2017 Thảm trải sàn dệt. Độ bền màu với dầu gội 9
23 TCVN 12068:2017 Thảm trải sàn đàn hồi. Xác định khối lượng
riêng
9
24 TCVN 12069:2017 Thảm trải sàn đàn hồi. Xác định khối lượng
trên đơn vị diện tích
7
Công nghệ thực phẩm Trở về đầu trang
25 TCVN 11931:2017 Yến mạch 8
26 TCVN 11936:2017 Sản phẩm nhân sâm 23
27
TCVN 11937:2017 Thực phẩm bổ sung và nguyên liệu thực vật.
Xác định aconitum alkaloid. Phương pháp sắc
kí lỏng với detector UV (LC-UV)
14
28
TCVN 11938:2017 Thực phẩm bổ sung và nguyên liệu thực vật.
Xác định campesterol, stigmasterol và beta-
sitosterol. Phương pháp sắc kí khí
15
29
TCVN 11939:2017 Thực phẩm. Xác định hoạt độ chống oxy hóa
bằng phản ứng với 2,2-diphenyl-1-
picrylhydrazyl (DPPH)
15
30
TCVN 11940:2017 Thực phẩm bổ sung và nguyên liệu thực vật.
Xác định axit aristolochic-1. Phương pháp sắc
ký lỏng với detector UV (LC-UV) và khẳng
định bằng sắc ký lỏng phổ khối lượng
15
31
TCVN 12076:2017 Chiếu xạ thực phẩm. Yêu cầu đối với việc xây
dựng, đánh giá xác nhận và kiểm soát thường
xuyên quá trình chiếu xạ bằng bức xạ ion hoá
để xử lý thực phẩm
32
32
TCVN 12077:2017 Thực phẩm. Phát hiện thực phẩm chiếu xạ
bằng kỹ thuật sàng lọc vi sinh vật sử dụng các
quy trình xác định nồng độ nội độc tố/định
lượng tổng vi khuẩn gram âm (LAL/GNB)
21
33 TCVN 7746:2017 Thay thế:
TCVN 7746:2007
Thực phẩm. Phát hiện thực phẩm chiếu xạ sử
dụng quang phát quang
17
34 TCVN 12078:2017 Hướng dẫn lựa chọn và sử dụng vật liệu tiếp
xúc dùng cho thực phẩm được chiếu xạ
12
35
TCVN 12079:2017 Hướng dẫn chiếu xạ để kiểm soát sinh vật gây
bệnh và vi sinh vật gây hư hỏng trên cá và
động vật không xương sống dùng làm thực
phẩm
17
36 TCVN 3591:2017 Thay thế:
TCVN 3591:1988
Aga 10
37 TCVN 11932:2017 Gạo. Xác định các đặc tính sinh trắc học của
hạt
12
38 TCVN 5716-1:2017 Thay
thế: TCVN 5716-1:2008
Gạo. Xác định hàm lượng amylose. Phần 1:
Phương pháp chuẩn
13
39 TCVN 5716-2:2017 Thay
thế: TCVN 5716-2:2008
Gạo. Xác định hàm lượng amylose. Phần 2:
Phương pháp thông dụng
14
40 TCVN 6555:2017 Thay thế:
TCVN 6555:2011
Ngũ cốc, sản phẩm từ ngũ cốc và thức ăn chăn
nuôi. Xác định hàm lượng chất béo thô và hàm
22
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 6/36
lượng chất béo tổng số bằng phương pháp chiết
randall
Công nghệ thực phẩm - Dầu mỡ ăn Trở về đầu trang
41 TCVN 12080:2017 Dầu mỡ động vật và thực vật. Xác định các
hydrocacbon béo trong dầu thực vật
36
42
TCVN 12081-1:2017 Dầu mỡ động vật và thực vật. Xác định các
chloropropanediol (MCPD) liên kết với axit
béo và glycidol bằng sắc ký khối phổ
(GC/MS). Phần 1: Phương pháp sử dụng sự
chuyển hoá este kiềm nhanh, đo 3-MCPD và
phép đo vi sai glycidol
19
43
TCVN 9675-1:2017 Thay
thế: TCVN 10475:2014
Dầu mỡ động vật và thực vật. Sắc ký khí các
metyl este của axit béo. Phần 1: Hướng dẫn đo
sắc ký khí các metyl este của axit béo
12
44
TCVN 9675-4:2017 Thay
thế: TCVN 10475:2014
Dầu mỡ động vật và thực vật. Sắc ký khí các
metyl este của axit béo. Phần 4: Xác định bằng
sắc ký khí mao quản
27
45
TCVN 6761:2017 Thay thế:
TCVN 6761:2008
Dầu mỡ động vật và thực vật. Xác định hàm
lượng tocopherol và tocotrienol bằng sắc ký
lỏng hiệu năng cao
25
46 TCVN 6763:2017 Thay thế:
TCVN 6763:2008
Dầu mỡ động vật và thực vật. Xác định độ bền
ôxy hóa (Phép thử ôxy hóa nhanh)
19
47 TCVN 9670:2017 Thay thế:
TCVN 9670:2013
Dầu mỡ động vật và thực vật – Xác định trị số
anisidin
12
Công nghệ thực phẩm - Gia vị. Phụ gia thực phẩm Trở về đầu trang
48 TCVN 11921-1:2017 Phụ gia thực phẩm. Các hợp chất cellulose.
Phần 1: Cellulose vi tinh thể
13
49 TCVN 11921-2:2017 Phụ gia thực phẩm. Các hợp chất cellulose.
Phần 2: Cellulose bột
10
50 TCVN 11921-3:2017 Phụ gia thực phẩm. Các hợp chất cellulose.
Phần 3: Methyl cellulose
12
51 TCVN 11921-4:2017 Phụ gia thực phẩm. Các hợp chất cellulose.
Phần 4: Ethyl cellulose
11
52 TCVN 11921-5:2017 Phụ gia thực phẩm. Các hợp chất cellulose.
Phần 5: Hydroxypropyl cellulose
15
53 TCVN 11921-6:2017 Phụ gia thực phẩm. Các hợp chất cellulose.
Phần 6: Hydroxypropylmethyl cellulose
20
54 TCVN 11921-7:2017 Phụ gia thực phẩm. Các hợp chất cellulose.
Phần 7: Methyl ethyl cellulose
15
55 TCVN 11921-8:2017 Phụ gia thực phẩm. Các hợp chất cellulose.
Phần 8: Natri carboxymethyl cellulose
15
56 TCVN 12099:2017 Phụ gia thực phẩm. Gelatin 10
57 TCVN 12100:2017 Phụ gia thực phẩm. Pectins 20
58 TCVN 12101-1:2017 Phụ gia thực phẩm. Axit alginic và các muối
alginat. Phần 1: Axit alginic
11
59 TCVN 12101-2:2017 Phụ gia thực phẩm. Axit alginic và các muối
alginat. Phần 2: Natri alginat
11
60 TCVN 12101-3:2017 Phụ gia thực phẩm. Axit alginic và các muối
alginat. Phần 3: Kali alginat
11
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 7/36
61 TCVN 12101-4:2017 Phụ gia thực phẩm. Axit alginic và các muối
alginat. Phần 4: Amoni alginat
11
62 TCVN 12101-5:2017 Phụ gia thực phẩm. Axit alginic và các muối
alginat. Phần 5: Canxi alginat
10
63 TCVN 12101-6:2017 Phụ gia thực phẩm. Axit alginic và các muối
alginat. Phần 6: Propylen glycol alginat
12
Công nghệ thực phẩm - Thịt, sản phẩm thịt Trở về đầu trang
64 TCVN 11927:2017 Thịt và sản phẩm thịt. Hướng dẫn kiểm soát
teania saginata (sán dây) trong thịt trâu bò
11
65 TCVN 11928:2017 Thịt và sản phẩm thịt. Hướng dẫn kiểm soát
trichinella spp. trong thịt lợn
13
66 TCVN 8157:2017 Thay thế:
TCVN 8157:2009
Thịt xay nhuyễn đã xử lý nhiệt 10
67 TCVN 8158:2017 Thay thế:
TCVN 8158:2009
Thịt xay thô đã xử lý nhiệt 11
68 TCVN 8159:2017 Thay thế:
TCVN 8159:2009
Thịt đùi lợn đã xử lý nhiệt 10
69 TCVN 9668:2017 Thay thế:
TCVN 9668:2013
Thịt bò đã xử lý nhiệt 9
70 TCVN 9669:2017 Thay thế:
TCVN 9669:2013
Thịt vai lợn đã xử lý nhiệt 10
Công nghệ thực phẩm – Thủy sản Trở về đầu trang
71
TCVN 11941:2017 Thuỷ sản và sản phẩm thuỷ sản. Xác định hàm
lượng putrescine và cadaverine. Phương pháp
sắc ký khí
17
72
TCVN 11942:2017 Thuỷ sản và sản phẩm thuỷ sản. Xác định dư
lượng các hợp chất màu triphenylmetan và các
chất chuyển hoá của chúng. Phương pháp sắc
ký lỏng phổ khối lượng hai lần (lc-ms/ms)
19
73 TCVN 6175-1:2017 Thay
thế: TCVN 6175:1996
Thuỷ sản khô tẩm gia vị ăn liền. Phần 1: Cá,
mực khô
15
74 TCVN 6387:2017 Thay thế:
TCVN 6387:2006
Tôm đóng hộp 12
75 TCVN 6389:2017 Thay thế:
TCVN 6389:2003
Thịt cua, ghẹ đóng hộp 10
76 TCVN 12153:2018 Cá ngừ nguyên liệu 13
Công nghệ thực phẩm – Đồ uống Trở về đầu trang
77 TCVN 12082:2017 Rượu vang. Xác định hàm lượng chất khô tổng
số. Phương pháp khối lượng
10
78 TCVN 12083:2017 Rượu vang. Xác định hàm lượng tro 7
79 TCVN 12084:2017 Rượu vang. Xác định glucose và fructose.
Phương pháp enzym
11
80
TCVN 12085:2017 Rượu vang. Xác định nồng độ rượu theo thể
tích. Phương pháp chưng cất sử dụng
pycnometer
22
81 TCVN 12086:2017 Rượu vang. Xác định độ axit tổng số 9
82 TCVN 12087:2017 Rượu vang. Xác định độ axit bay hơi 10
83 TCVN 12088:2017 Rượu vang. Xác định hàm lượng cacbon
dioxit. Phương pháp chuẩn độ
9
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 8/36
Công nghệ chế biến gỗ - Gỗ dán Trở về đầu trang
84 TCVN 7752:2017 Thay thế:
TCVN 7752:2007
Gỗ dán. Từ vựng 25
Dầu mỏ Trở về đầu trang
85
TCVN 8314:2010 Sản phẩm dầu mỏ dạng lỏng. Xác định khối
lượng riêng và khối lượng riêng tương đối
bằng máy đo kỹ thuật số
14
Điện tử - Quang điện Trở về đầu trang
86
TCVN 6781-1-1:2017 Môđun quang điện (PV) mặt đất. Chất lượng
thiết kế và phê duyệt kiểu. Phần 1-1: Yêu cầu
cụ thể đối với thử nghiệm môđun quang điện
(pv) tinh thể silic
9
Đo lường và phép đo Trở về đầu trang
87
TCVN 8769:2017 Thay thế:
TCVN 8769:2011
Thực hành đo liều áp dụng cho thiết bị chùm
tia điện tử để xử lý chiếu xạ ở năng lượng từ 80
keV đến 300 keV
30
88
TCVN 8770:2017 Thay thế:
TCVN 8770:2011
Thực hành sử dụng hệ đo liều nhiệt lượng để
đo chùm tia điện tử và hiệu chuẩn liều kế
thường xuyên
24
89 TCVN 8772:2017 Thay thế:
TCVN 8772:2011
Hướng dẫn đo liều đối với các chương trình
phóng thích côn trùng bất dục
32
Đường sắt Trở về đầu trang
90
QCVN 15:2018/BGTVT
Thay thế: QCVN
15:2011/BGTVT
Quy chuẩn kỹ thuật quốc gia về yêu cầu an
toàn kỹ thuật và bảo vệ môi trường đối với
phương tiện giao thông đường sắt khi kiểm tra
định kỳ
41
91
QCVN 18:2018/BGTVT
Thay thế: QCVN
18:2011/BGTVT
Quy chuẩn kỹ thuật quốc gia về kiểm tra,
nghiệm thu toa xe khi sản xuất, lắp ráp và nhập
khẩu
73
Giấy Trở về đầu trang
92 TCVN 6726:2017 Thay thế:
TCVN 6726:2007
Giấy và các tông. Xác định độ hút nước.
Phương pháp Cobb
14
93 TCVN 6886:2017 Thay thế:
TCVN 6886:2001
Giấy in 10
Phụ tùng đường ống và đường ống Trở về đầu trang
94 TCVN 12006:2017 Ống mềm cao su gia cường sợi dùng để dẫn
nước thông dụng. Quy định kỹ thuật
9
95
TCVN 12007:2017 Ống mềm và hệ ống cao su và chất dẻo dùng
cho hệ thống phân phối nhiên liệu đã xác định.
Quy định kỹ thuật
32
96 TCVN 12008:2017 Ống mềm cao su và chất dẻo. Phương pháp thử
đối với tính cháy
12
97 TCVN 12009:2017 Ống mềm và ống cứng cao su và chất dẻo. Xác
định độ thấm chất lỏng qua thành ống
12
98
TCVN 12116:2017 Hệ thống đường ống bằng chất dẻo. Ống nhựa
nhiệt rắn gia cường thuỷ tinh (GRP). Xác định
thời gian phá huỷ do áp suất bên trong
12
99 TCVN 12117:2017 Hệ thống đường ống bằng chất dẻo. Ống và
phụ tùng nhựa nhiệt rắn gia cường thuỷ tinh
14
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 9/36
(GRP). Xác định độ bền hoá học của phần bên
trong ống chịu lệch dạng
100
TCVN 12118:2017 Hệ thống đường ống bằng chất dẻo. Ống và
phụ tùng nhựa nhiệt rắn gia cường thuỷ tinh
(GRP). Phương pháp thử kiểm chứng thiết kế
kết cấu của phụ tùng
12
101
TCVN 12119:2018 Hệ thống ống chất dẻo dùng để thoát nước thải
và chất thải (nhiệt độ thấp và cao) trong các
toà nhà. Ống và phụ tùng poly(vinyl clorua)
không hoá dẻo (PVC-U)
34
102
TCVN 9562:2017 Thay thế:
TCVN 9562:2013
Hệ thống ống bằng chất dẻo cấp nước chịu áp
và không chịu áp. Hệ thống ống nhựa nhiệt rắn
gia cường thuỷ tinh (GRP) trên cơ sở nhựa
polyeste không no (UP)
66
Khoáng sản kim loại và tinh quặng Trở về đầu trang
103
TCVN 12125:2017 Tinh quặng đồng, chì, kẽm và niken sulfua.
Xác định hàm lượng ẩm trong mẫu phân tích.
Phương pháp khối lượng
11
104
TCVN 12126:2017 Tinh quặng đồng, chì và kẽm sulfua. Xác định
vàng và bạc. Phương pháp nhiệt nghiệm khối
lượng và quang phổ hấp thụ nguyên tử ngọn
lửa
55
105 TCVN 12127:2017 Tinh quặng đồng sulfua. Xác định đồng.
Phương pháp điện phân
27
106
TCVN 12128:2017 Tinh quặng kẽm sulfua. Xác định kẽm.
Phương pháp chiết dung môi và chuẩn độ
EDTA
23
107 TCVN 12129:2017 Tinh quặng đồng, chì, kẽm và niken sulfua.
Xác định khối lượng kim loại có trong lô
13
108
TCVN 12130:2017 Tinh quặng chì sulfua. Xác định hàm lượng
chì. Phương pháp chuẩn độ EDTA sau khi
phân huỷ bằng axit
22
Khai thác mỏ và khoáng sản - Than Trở về đầu trang
109
TCVN 12120:2017 Than nâu và than non. Xác định hàm lượng
chất tan trong benzen. Phương pháp chiết bán
tự động
12
110
TCVN 12121-1:2017 Than nâu và than non. Xác định hàm lượng
chất bốc trong mẫu phân tích. Phần 1: Phương
pháp hai lò nung
12
111
TCVN 12122:2017 Than nâu và than non. Xác định khối lượng
riêng tương đối thực và khối lượng riêng tương
đối biểu kiến
11
112 TCVN 12123:2017 Than nâu và than non. Xác định hàm lượng
axit humic
11
113 TCVN 12124:2017 Than đá. Xác định độ mài mòn 13
Luyện kim - Kim loại màu Trở về đầu trang
114
TCVN 12032:2017 Nhôm oxit dùng để sản xuất nhôm nguyên liệu.
Phân tích cỡ hạt trong dải từ 45 μm đến 150
μm. Phương pháp sử dụng sàng đột lỗ bằng
16
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 10/36
điện
115 TCVN 12033:2017 Nhôm oxit dùng để sản xuất nhôm nguyên liệu.
Xác định chỉ số mài mòn
15
116
TCVN 12034:2017 Nhôm oxit dùng để sản xuất nhôm. Phương
pháp xác định khối lượng riêng khi đổ đống và
khi lèn chặt
12
117 TCVN 12035:2017 Nhôm oxit dùng để sản xuất nhôm. Phương
pháp xác định thời gian chảy
11
118
TCVN 12036:2017 Nhôm oxit dùng để sản xuất nhôm. Xác định
nguyên tố lượng vết. Phương pháp quang phổ
huỳnh quang bước sóng tán xạ tia X
41
Môi trường – An toàn bức xạ Trở về đầu trang
119 TCVN 11967:2017 Thiết bị UVC. Thông tin an toàn. Giới hạn phơi
nhiễm cho phép đối với con người
13
120 TCVN 12018:2017 Bảo vệ bức xạ. Thực hành sử dụng hệ đo liều
fricke
22
121 TCVN 12019:2017 Bảo vệ bức xạ. Thực hành hiệu chuẩn hệ đo
liều thường quy cho xử lý bức xạ
38
122
TCVN 12020:2017 Bảo vệ bức xạ. Thực hành đo liều trong một số
cơ sở xử lý bức xạ bằng tia x (bức xạ hãm) với
năng lượng trong khoảng từ 50 kev đến 7,5
mev
40
123 TCVN 12021:2017 Bảo vệ bức xạ. Hướng dẫn đánh giá độ không
đảm bảo đo trong đo liều xử lý bức xạ
28
124 TCVN 7910:2017 Thay thế:
TCVN 7910:2008
Bảo vệ bức xạ. Thực hành sử dụng hệ đo liều
phim nhuộm màu bức xạ
18
125 TCVN 7911:2017 Thay thế:
TCVN 7911:2008
Bảo vệ bức xạ. Thực hành sử dụng hệ đo liều
polymetylmetacrylat
19
Môi trường – An toàn lao động. Vệ sinh công nghiệp Trở về đầu trang
126
TCVN 11965-1:2017 Phương pháp thử để đánh giá tính năng của
phương tiện và thiết bị làm sạch không khí pha
khí cho hệ thống thống gió chung. Phần 1:
Phương tiện làm sạch không khí pha khí
48
127
TCVN 11965-2:2017 Phương pháp thử để đánh giá tính năng của
phương tiện và thiết bị làm sạch không khí pha
khí cho hệ thống thống gió chung. Phần 2:
Thiết bị làm sạch không khí pha khí (GPACD)
49
128 TCVN 11966:2017 Phương pháp thử tại chỗ cho hệ thống phin lọc
hiệu suất cao trong các cơ sở công nghiệp
48
Môi trường – Bảo vệ môi trường Trở về đầu trang
129 TCVN ISO 14034:2017 Quản lý môi trường. Kiểm định công nghệ môi
trường (ETV)
33
130
TCVN ISO 14004:2017
Thay thế: TCVN ISO
14004:2005
Hệ thống quản lý môi trường. Hướng dẫn
chung về áp dụng
83
131
TCVN ISO 14021:2017
Thay thế: TCVN ISO
14021:2013
Nhãn môi trường và công bố về môi trường. Tự
công bố về môi trường (ghi nhãn môi trường
kiểu II)
40
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 11/36
Môi trường - Chất lượng không khí Trở về đầu trang
132
TCVN 12029:2018 Phát thải nguồn tĩnh. Xác định lưu lượng thể
tích và vận tốc khí ống khói (trong ống pitot
kiểu S)
25
133 TCVN 12030:2018 Phát thải nguồn tĩnh. Xác định sự giảm phát
thải lưu huỳnh tổng số
25
134
TCVN 12031:2018 Phát thải nguồn tĩnh. Xác định các hợp chất
hữu cơ trong khí thải bằng phương pháp sắc ký
khí
47
Môi trường - Chất lượng nước Trở về đầu trang
135 QCVN 99:2017/GTVT Quy chuẩn kỹ thuật quốc gia về kiểm soát và
quản lý nước dằn và cặn nước dằn tàu biển
23
136 QCVN 99:2017/BGTVT Quy chuẩn kỹ thuật quốc gia về kiểm soát và
quản lý nước dằn và cặn nước dằn tàu biển
23
137 TCVN 12026:2018 Chất lượng nước. Xác định oxy hoà tan.
Phương pháp cảm biến quang học
37
138
TCVN 12027:2018 Chất lượng nước. Xác định xianua tự do có sẵn
(pH 6) bằng phương pháp phân tích dòng chảy
(FIA), khuếch tán khí và đo dòng điện
18
139 TCVN 12028:2018 Chất lượng nước. Đồng vị urani. Phương pháp
thử sử dụng quang phổ anpha
25
140
TCVN 6663-14:2018 Thay
thế: TCVN 6663-14:2000
Chất lượng nước. Lấy mẫu. Phần 14: Hướng
dẫn về đảm bảo và kiểm soát chất lượng nước
được lấy mẫu và xử lý
43
141 TCVN 6663-6:2018 Thay
thế: TCVN 6663-6:2008
Chất lượng nước. Lấy mẫu. Phần 6: Hướng dẫn
lấy mẫu nước sông và suối
37
Môi trường - Chất thải Trở về đầu trang
142
TCVN 12057:2017 Chất thải. Phương pháp thử để xác định độ ổn
định và khả năng phối trộn của vật liệu thải thể
rắn, thể bán rắn hoặc thể lỏng
10
143
TCVN 12058:2017 Chất thải rắn. Phương pháp thực hành lấy mẫu
chất rắn không có kết trong thùng hình trụ hoặc
các thùng chứa tương tự
18
144
TCVN 12180-1:2017 Hướng dẫn sử dụng nước thải đã xử lý cho các
dự án tưới. Phần 1: Cơ sở của một dự án tái sử
dụng cho tưới
43
145 TCVN 12180-2:2017 Hướng dẫn sử dụng nước thải đã xử lý cho các
dự án tưới. Phần 2: Xây dựng dự án
36
146
TCVN 12180-3:2017 Hướng dẫn sử dụng nước thải đã xử lý cho các
dự án tưới. Phần 3: Các hợp phần của dự án tái
sử dụng cho tưới
51
Môi trường - Ecgônômi (công thái học) Trở về đầu trang
147
TCVN 12108-1:2017 Thiết kế ecgônômi các trung tâm điều khiển.
Phần 1: Nguyên tắc thiết kế các trung tâm điều
khiển
40
148 TCVN 12108-2:2017 Thiết kế ecgônômi các trung tâm điều khiển.
Phần 2: Nguyên tắc bố trí các tổ hợp điều khiển
21
149 TCVN 12108-3:2017 Thiết kế ecgônômi các trung tâm điều khiển.
Phần 3: Bố cục phòng điều khiển
46
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 12/36
150
TCVN 12108-4:2017 Thiết kế ecgônômi các trung tâm điều khiển.
Phần 4: Kích thước và bố cục của trạm làm
việc
49
151 TCVN 12108-5:2017 Thiết kế ecgônômi các trung tâm điều khiển.
Phần 5: Hiển thị và điều khiển
62
152
TCVN 12108-6:2017 Thiết kế ecgônômi các trung tâm điều khiển.
Phần 6: Các yêu cầu về môi trường đối với
trung tâm điều khiển
29
153
TCVN 12108-7:2017 Thiết kế ecgônômi các trung tâm điều khiển.
Phần 7: Nguyên tắc đánh giá trung tâm điều
khiển
32
Môi trường - Hệ thống cảnh báo và báo động Trở về đầu trang
154 TCVN 7568-20:2016 Hệ thống báo cháy. Phần 20: Bộ phát hiện khói
công nghệ hút
62
Môi trường - Phòng cháy Trở về đầu trang
155
TCVN 12110:2018 Phòng cháy chữa cháy. Bơm ly tâm chữa cháy
loại khiêng tay dùng động cơ đốt trong. Yêu
cầu kỹ thuật và phương pháp kiểm tra
11
Môi trường - Thiết bị bảo vệ Trở về đầu trang
156
TCVN 11953-1:2017 Phương tiện bảo vệ cơ quan hô hấp. Phương
pháp thử và thiết bị thử. Phần 1: Xác định độ rò
rỉ khí vào bên trong
41
157
TCVN 11953-2:2017 Phương tiện bảo vệ cơ quan hô hấp. Phương
pháp thử và thiết bị thử. Phần 2: Xác định trở
lực hô hấp
19
158
TCVN 11953-3:2017 Phương tiện bảo vệ cơ quan hô hấp. Phương
pháp thử và thiết bị thử. Phần 3: Xác định độ
lọt của phin lọc bụi
15
159
TCVN 11953-4:2017 Phương tiện bảo vệ cơ quan hô hấp. Phương
pháp thử và thiết bị thử. Phần 4: Xác định dung
lượng của phin lọc khí và phép thử di trú, giải
hấp và thử động cacbon monoxit
23
160
TCVN 11953-6:2017 Phương tiện bảo vệ cơ quan hô hấp. Phương
pháp thử và thiết bị thử. Phần 6: Độ bền cơ học
của các bộ phận và mối nối
29
161
TCVN 11953-7:2017 Phương tiện bảo vệ cơ quan hô hấp. Phương
pháp thử và thiết bị thử. Phần 7: Phương pháp
thử tính năng thực tế
14
162
TCVN 11953-8:2017 Phương tiện bảo vệ cơ quan hô hấp. Phương
pháp thử và thiết bị thử. Phần 8: Phương pháp
đo tốc độ dòng khí của phương tiện bảo vệ cơ
quan hô hấp loại lọc có hỗ trợ
18
163
TCVN 11953-9:2017 Phương tiện bảo vệ cơ quan hô hấp. Phương
pháp thử và thiết bị thử. Phần 9: Xác định hàm
lượng cacbon dioxit trong khí hít vào
23
Nông nghiệp Trở về đầu trang
164 TCVN 11879:2018 Thức ăn hỗn hợp cho cá rô đồng 10
165 TCVN 12188:2018 Máy nông nghiệp. Máy liên hợp thu hoạch lúa.
Yêu cầu kỹ thuật
13
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 13/36
166 TCVN 8754:2017 Giống cây lâm nghiệp. Giống mới được công
nhận
5
167 TCVN 8755:2017 Giống cây lâm nghiệp. Cây trội 9
168 TCVN 8760-1:2017 Giống cây lâm nghiệp. Vườn cây đầu dòng.
Phần 1: Nhóm các loài keo và bạch đàn
7
169
TCVN 8761-1:2017 Giống cây lâm nghiệp. Khảo nghiệm giá trị
canh tác và giá trị sử dụng. Phần 1: Nhóm loài
cây lấy gỗ
8
170 TCVN 8550:2018 Thay thế:
TCVN 8550:2011
Giống cây trồng. Phương pháp kiểm định
ruộng giống
22
Nông nghiệp – Phân bón Trở về đầu trang
171 TCVN 9486:2018 Thay thế:
TCVN 9486:2013
Phân bón. Lấy mẫu 25
172 TCVN 12105:2018 Phân bón vi sinh vật. Lấy mẫu 14
Sơn và chất màu Trở về đầu trang
173
TCVN 12005-1:2017 Sơn và vecni. Đánh giá sự suy biến của lớp
phủ. Ký hiệu số lượng, kích cỡ của khuyết tật
và mức biến đổi đồng nhất về ngoại quan. Phần
1: Giới thiệu chung và hệ thống ký hiệu
9
174
TCVN 12005-10:2017 Sơn và vecni. Đánh giá sự suy biến của lớp
phủ. Ký hiệu số lượng, kích cỡ của khuyết tật
và mức biến đổi đồng nhất về ngoại quan. Phần
10: Đánh giá độ ăn mòn dạng sợi
12
175
TCVN 12005-2:2017 Sơn và vecni. Đánh giá sự suy biến của lớp
phủ. Ký hiệu số lượng, kích cỡ của khuyết tật
và mức biến đổi đồng nhất về ngoại quan. Phần
2: Đánh giá độ phồng rộp
17
176
TCVN 12005-3:2017 Sơn và vecni. Đánh giá sự suy biến của lớp
phủ. Ký hiệu số lượng, kích cỡ của khuyết tật
và mức biến đổi đồng nhất về ngoại quan. Phần
3: Đánh giá độ gỉ
19
177
TCVN 12005-4:2017 Sơn và vecni. Đánh giá sự suy biến của lớp
phủ. Ký hiệu số lượng, kích cỡ của khuyết tật
và mức biến đổi đồng nhất về ngoại quan. Phần
4: Đánh giá độ rạn nứt
19
178
TCVN 12005-5:2017 Sơn và vecni. Đánh giá sự suy biến của lớp
phủ. Ký hiệu số lượng, kích cỡ của khuyết tật
và mức biến đổi đồng nhất về ngoại quan. Phần
5: Đánh giá độ bong tróc
10
179
TCVN 12005-6:2017 Sơn và vecni. Đánh giá sự suy biến của lớp
phủ. Ký hiệu số lượng, kích cỡ của khuyết tật
và mức biến đổi đồng nhất về ngoại quan. Phần
6: Đánh giá độ phấn hoá bằng phương pháp
băng dính
10
180
TCVN 12005-7:2017 Sơn và vecni. Đánh giá sự suy biến của lớp
phủ. Ký hiệu số lượng, kích cỡ của khuyết tật
và mức biến đổi đồng nhất về ngoại quan. Phần
7: Đánh giá độ phấn hoá bằng phương pháp vải
nhung
10
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 14/36
181
TCVN 12005-8:2017 Sơn và vecni. Đánh giá sự suy biến của lớp
phủ. Ký hiệu số lượng, kích cỡ của khuyết tật
và mức biến đổi đồng nhất về ngoại quan. Phần
8: Đánh giá độ tách lớp và độ ăn mòn xung
quanh vết khía hoặc khuyết tật nhân tạo khác
14
Thiết bị điện gia dụng Trở về đầu trang
182
QCVN 09:2012/BKHCN
Sửa đổi 1:2018
Quy chuẩn kỹ thuật Quốc gia về tương thích
điện từ đối với thiết bị điện và điện tử gia dụng
và các mục đích tương tự
6
Thiết bị giải trí – Đồ chơi trẻ em Trở về đầu trang
183 TCVN 6238-5A:2017 An toàn đồ chơi trẻ em. Phần 5A: Xác định
tổng hàm lượng một số nguyên tố trong đồ chơi
21
184 TCVN 6238-7:2017 An toàn đồ chơi trẻ em. Phần 7: Yêu cầu và
phương pháp thử cho sơn dùng bằng tay
64
185 TCVN 6238-1:2017 Thay
thế: TCVN 6238-1:2011
An toàn đồ chơi trẻ em. Phần 1: Các yêu cầu an
toàn liên quan đến tính chất cơ lý
152
186 TCVN 6238-2:2017 Thay
thế: TCVN 6238-2:2008
An toàn đồ chơi trẻ em. Phần 2: Tính cháy 28
187
TCVN 6238-4A:2017 Thay
thế: TCVN 6238-4A:2011
An toàn đồ chơi trẻ em. Phần 4A: Đu, cầu trượt
và các đồ chơi vận động tương tự sử dụng tại
gia đình
75
Vi sinh vật Trở về đầu trang
188
TCVN 11922:2017 Vi sinh vật trong chuỗi thực phẩm. Yêu cầu và
hướng dẫn kỹ thuật để xây dựng hoặc soát xét
phương pháp chuẩn đã được chuẩn hóa
11
189
TCVN 11924:2017 Vi sinh vật trong chuỗi thực phẩm. Phản ứng
chuỗi polymerase (PCR) để phát hiện vi sinh
vật gây bệnh từ thực phẩm. Phát hiện Yersinia
enterocolitica gây bệnh và Yersinia
pseudotuberculosis
38
190
TCVN 11925:2017 Vi sinh vật trong thực phẩm và thức ăn chăn
nuôi. Phản ứng chuỗi polymerase (PCR) để
phát hiện vi sinh vật gây bệnh từ thực phẩm.
Yêu cầu về chuẩn bị mẫu để phát hiện định tính
14
191
TCVN 11926:2017 Hướng dẫn đảm bảo chất lượng vi sinh vật đối
với gia vị và thảo mộc dùng trong các sản
phẩm thịt chế biến
7
192
TCVN 10780-1:2017 Thay
thế: TCVN 4829:2005
Vi sinh vật trong chuỗi thực phẩm. Phương
pháp phát hiện, định lượng và xác định typ
huyết thanh của salmonella. Phần 1: Phương
pháp phát hiện salmonella spp.
57
193
TCVN 11923:2017 Thay
thế: TCVN 4886:1989
Vi sinh vật trong chuỗi thực phẩm. Kỹ thuật
lấy mẫu để phân tích vi sinh vật trong thực
phẩm và thức ăn chăn nuôi
26
194
TCVN 7924-3:2017 Thay
thế: TCVN 7924-3:2008
Vi sinh vật trong chuỗi thực phẩm. Phương
pháp định lượng Escherichia coli dương tính β-
glucuronidaza. Phần 3: Phát hiện và kỹ thuật
tính số có xác suất lớn nhất sử dụng 5-bromo-
4-clo-3-indolyl β-D-glucuronid
16
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 15/36
195 TCVN 12104:2018 Vi sinh vật giải xenlulo. Xác định hoạt độ
xenlulaza
15
Vấn đề chung. Thuật ngữ. Tiêu chuẩn hóa. Tư liệu Trở về đầu trang
196 QCVN 49:2012/BTNMT quy chuẩn kỹ thuật quốc gia về lập bản đồ 68
Vật liệu xây dựng Trở về đầu trang
197 QCVN 17:2018/BXD Thay
thế:QCVN 17:2013/BXD
Quy chuẩn kỹ thuật Quốc gia về xây dựng và
lắp đặt phương tiện quảng cáo ngoài trời
15
198 TCVN 7958:2017 Thay thế:
TCVN 7958:2008
Bảo vệ công trình xây dựng. Phòng chống mối
cho công trình xây dựng mới
20
199
TCVN 8268:2017 Thay thế:
TCVN 8268:2009
Bảo vệ công trình xây dựng. Diệt và phòng
chống mối cho công trình xây dựng đang sử
dụng
17
200 TCVN 9394:2012 Thay thế:
TCXDVN 286:2003
Đóng và ép cọc. Thi công và nghiệm thu 41
201 TCVN 11977:2017 Thép cốt bê tông. Phương pháp thử và tiêu chí
chấp nhận mối nối hàn đối đầu bằng khí áp lực
10
202
TCVN 12041:2017 Thay
thế:TCVN 3993:1985
Kết cấu bê tông và bê tông cốt thép. Yêu cầu
chung về thiết kế độ bền lâu và tuổi thọ trong
môi trường xâm thực
24
203 TCVN 4732:2016 Thay thế:
TCVN 4732:2007
Đá ốp, lát tự nhiên 14
204 TCVN 7959:2017 Thay thế:
TCVN 7959:2011
Bê tông nhẹ. Sản phẩm bê tông khí chưng áp.
Yêu cầu kỹ thuật
9
205 TCVN 9029:2017 Thay thế:
TCVN 9029:2011
Bê tông nhẹ. Sản phẩm bê tông bọt và bê tông
khí không chưng áp. Yêu cầu kỹ thuật.
10
206 TCVN 9030:2017 Thay thế:
TCVN 9030:2011
Bê tông nhẹ. Phương pháp thử 18
Viễn thông - Dịch vụ di động Trở về đầu trang
207
QCVN 66:2018/BTTTT
Thay thế: QCVN
66:2013/BTTTT
Quy chuẩn kỹ thuật quốc gia về Thiết bị lặp
thông tin di động W-CDMA FDD
37
Xây dựng dân dụng Trở về đầu trang
208 QCVN 48:2012/BGTVT Quy chuẩn kỹ thuật quốc gia về phân cấp và
giám sát kỹ thuật giàn di động trên biển
45
209 QCVN 49:2012/BGTVT Quy chuẩn kỹ thuật quốc gia về phân cấp và
giám sát kỹ thuật giàn cố định
41
210 TCVN 12040:2017 Mương bê tông cốt sợi thành mỏng đúc sẵn 17
211 TCVN 11322:2018 Công trình thủy lợi. Màng chống thấm HDPE.
Thiết kế, thi công, nghiệm thu
36
212 TCVN 12196:2018 Công trình thủy lợi, thí nghiệm mô hình vật lý
sông
50
Tiêu chuẩn nước ngoài
Bao gói và phân phối hàng hóa Trở về đầu trang
213
ASTM D4334-18 Replaces:
ASTM D4334-05(2010)
Standard Practice for Determination of the
Dip Tube Retention of a Mechanical Pump
Dispenser
2
214
ASTM D4335-18 Replaces:
ASTM D4335-99(2010)
Standard Practice for Determination of
Component Retention of a Mechanical Pump
Dispenser
2
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 16/36
215 ASTM D3070-18 Replaces:
ASTM D3070-00(2010)
Standard Practice for Rapid Pressure
Determination of Pressurized Products
3
216 ASTM D3076-18 Replaces:
ASTM D3076-00(2010)
Standard Practice for Effective Crimping on
Outside Crimped Valves of Aerosol Containers
4
217 ASTM D3094-18 Replaces:
ASTM D3094-00(2010)
Standard Practice for Seepage Rate of Aerosol
Products
3
218 ASTM D3890-18 Replaces:
ASTM D3890-05(2010)
Standard Practice for Number of Strokes to
Prime a Mechanical Pump Dispenser
2
219
ASTM D4333/D4333M-18
Replaces: ASTM
D4333/D4333M-
05(2010)e1
Standard Practice for Compatibility of
Mechanical Pump Dispenser Components
3
220
ASTM D4336-18 Replaces:
ASTM D4336-05(2010)
Standard Practice for Determination of the
Output Per Stroke of a Mechanical Pump
Dispenser
3
221
ASTM D6534-18 Replaces:
ASTM D6534-05(2010)
Standard Practice for Determining the Peak
Force-to-Actuate of a Mechanical Pump
Dispenser
3
222
ASTM D6535/D6535M-18
Replaces: ASTM
D6535/D6535M-
05(2010)e1
Standard Practice for Determining the Dip
Tube Length of a Mechanical Pump Dispenser
3
223
ASTM D6536/D6536M-18
Replaces: ASTM
D6536/D6536M-
00(2010)e1
Standard Practice for Measuring the Dip Tube
Length of a Mechanical Pump Dispenser
2
224 ASTM D6633-18 Replaces:
ASTM D6633-05(2010)
Standard Practice for Basic Functional
Stability of a Mechanical Pump Dispenser
3
225
BS EN ISO 10855-2:2018
Replaces: BS EN 12079-
2:2006
Offshore containers and associated lifting sets.
Design, manufacture and marking of lifting
sets
22
226
BS EN ISO 10855-1:2018
Replaces: BS EN 12079-
1:2006
Offshore containers and associated lifting sets.
Design, manufacture and marking of offshore
containers
38
227
BS EN ISO 10855-3:2018
Replaces: BS EN 12079-
3:2006
Offshore containers and associated lifting sets.
Periodic inspection, examination and testing
26
Cao su và chất dẻo Trở về đầu trang
228 ISO 1853:2018 Replaces:
ISO 1853:2011
Conducting and dissipative rubbers, vulcanized
or thermoplastic — Measurement of resistivity
13
229 ISO 2007:2018 Replaces:
ISO 2007:2007
Rubber, unvulcanized — Determination of
plasticity — Rapid-plastimeter method
7
230
ISO/TS 22638:2018 Rubber — Generation and collection of tyre
and road wear particles (TRWP) — Road
simulator laboratory method
8
231
ISO 14322:2018 Replaces;
ISO 14322:2012
Plastics — Epoxy resins — Determination of
degree of crosslinking of crosslinked epoxy
resins by differential scanning calorimetry
(DSC)
9
232 ISO 12058-1:2018 Plastics — Determination of viscosity using a 7
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 17/36
Replaces: ISO 12058-
1:1997
falling-ball viscometer — Part 1: Inclined-tube
method
233
ISO 25179:2018 Replaces;
ISO 25179:2010
Adhesives — Determination of the solubility
of water-soluble or alkali-soluble pressure-
sensitive adhesives
10
234
ISO 4586-2:2018 Replaces:
ISO 4586-2:2015
High-pressure decorative laminates (HPL,
HPDL) — Sheets based on thermosetting
resins (usually called laminates) — Part 2:
Determination of properties
100
235
ISO 4586-5:2018 Replaces;
ISO 4586-5:2015
High-pressure decorative laminates (HPL,
HPDL) — Sheets based on thermosetting
resins (usually called laminates) — Part 5:
Classification and specifications for flooring
grade laminates less than 2 mm thick intended
for bonding to supporting substrates
8
236
ISO 4586-1:2018 Replaces;
ISO 4586-1:2015
High-pressure decorative laminates (HPL,
HPDL) — Sheets based on thermosetting
resins (usually called laminates) — Part 1:
Introduction and general information
7
237
ISO 4586-4:2018 Replaces;
ISO 4586-4:2015
High-pressure decorative laminates (HPL,
HPDL) — Sheets based on thermosetting
resins (usually called laminates) — Part 4:
Classification and specifications for compact
laminates of thickness 2 mm and greater
12
238
ISO 4586-8:2018 Replaces:
ISO 4586-8:2015
High-pressure decorative laminates (HPL,
HPDL) — Sheets based on thermosetting
resins (usually called laminates) — Part 8:
Classification and specifications for alternative
core laminates
18
239
ISO 4586-3:2018 Replaces:
ISO 4586-3:2015
High-pressure decorative laminates (HPL,
HPDL) — Sheets based on thermosetting
resins (usually called laminates) — Part 3:
Classification and specifications for laminates
less than 2 mm thick and intended for bonding
to supporting substrates
14
240
ISO 4586-7:2018 Replaces:
ISO 4586-7:2015
High-pressure decorative laminates (HPL,
HPDL) — Sheets based on thermosetting
resins (usually called laminates) — Part 7:
Classification and specifications for design
laminates
22
241
ISO 4586-6:2018 Replaces;
ISO 4586-6:2015
High-pressure decorative laminates (HPL,
HPDL) — Sheets based on thermosetting
resins (usually called laminates) — Part 6:
Classification and specifications for exterior-
grade compact laminates of thickness 2 mm
and greater
11
242 ISO 8307:2018 Replaces:
ISO 8307:2007
Flexible cellular polymeric materials —
Determination of resilience by ball rebound
7
243 ISO 8067:2018 Replaces:
ISO 8067:2008
Flexible cellular polymeric materials —
Determination of tear strength
9
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 18/36
244
ASTM F1697-18 Replaces:
ASTM F1697-09(2015)
Standard Specification for Poly(Vinyl
Chloride) (PVC) Profile Strip for Machine
Spiral-Wound Liner Pipe Rehabilitation of
Existing Sewers and Conduit
7
245
ASTM F1741-18 Replaces:
ASTM F1741-08(2016)
Standard Practice for Installation of Machine
Spiral Wound Poly (Vinyl Chloride) (PVC)
Liner Pipe for Rehabilitation of Existing
Sewers and Conduits
9
246
BS ISO 25179:2018
Replaces: BS ISO
25179:2010
Adhesives. Determination of the solubility of
water-soluble or alkali-soluble pressure-
sensitive adhesives
16
247
BS ISO 14322:2018
Replaces: BS ISO
14322:2012
Plastics. Epoxy resins. Determination of
degree of crosslinking of crosslinked epoxy
resins by differential scanning calorimetry
(DSC)
16
248
BS EN ISO 10927:2018
Replaces: BS EN ISO
10927:2011
Plastics. Determination of the molecular mass
and molecular mass distribution of polymer
species by matrix-assisted laser
desorption/ionization time-of-flight mass
spectrometry (MALDI-TOF-MS)
22
249
BS EN ISO 20557-1:2018
Replaces: BS EN ISO
28941-1:2008
Plastics. Poly(phenylene ether) (PPE)
moulding and extrusion materials. Designation
system and basis for specifications
16
250
BS ISO 17422:2018
Replaces: BS ISO
17422:2002
Plastics. Environmental aspects. General
guidelines for their inclusion in standards
18
251
BS ISO 1853:2018
Replaces: BS ISO
1853:2011
Conducting and dissipative rubbers, vulcanized
or thermoplastic. Measurement of resistivity
22
252
BS ISO 2007:2018
Replaces: BS ISO
2007:2007
Rubber, unvulcanized. Determination of
plasticity. Rapid-plastimeter method
14
253
JIS K 6265:18 Rubber, vulcanized and thermoplastic —
Determination of temperature rise and
resistance to fatigue in flexometer testing
254
JIS K 6270:2018 Replaces:
JIS K 6270:2001
Rubber, vulcanized or thermoplastics —
Determination of tension fatigue (Constant
strain method)
255
JIS K 6921-1:2018
Replaces: JIS K 6921-
1:1997
Plastics — Polypropylene (PP) moulding and
extrusion materials — Part 1: Designation
system and basis for specifications
256
JIS K 6921-2:2018
Replaces: JIS K 6921-
2:2010
Plastics — Polypropylene (PP) moulding and
extrusion materials — Part 2: Preparation of
test specimens and determination of properties
257
JIS K 6922-1:2018
Replaces: JIS K 6922-
1:1997
Plastics — Polyethylene (PE) moulding and
extrusion materials — Part 1: Designation
system and basis for specifications
258
JIS K 6922-2:2018
Replaces: JIS K 6922-
2:2010
Plastics -- Polyethylene (PE) moulding and
extrusion materials — Part 2: Preparation of
test specimens and determination of properties
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 19/36
259 JIS S 0251:2018 Water-absorbent polyacrylate for urine
absorbing products
Chế tạo Trở về đầu trang
260
ISO/ASTM 52910:2018 Additive manufacturing — Design —
Requirements, guidelines and
recommendations
24
261
BS ISO/ASTM 52910:2018 Additive manufacturing. Design.
Requirements, guidelines and
recommendations
30
262 JIS B 4304:2018 Centre drills for centre holes 18
Chế tạo – Kỹ thuật hàn Trở về đầu trang
263
ISO/TR 20173:2018
Replaces; ISO/TR
20173:2009
Welding — Grouping systems for materials —
American materials
106
264
ISO 15626:2018 Replaces;
ISO 15626:2011
Non-destructive testing of welds — Time-of-
flight diffraction technique (TOFD) —
Acceptance levels
11
265
ASTM A488/A488M-2018
Replaces: ASTM
A488/A488M-17
Standard Practice for Steel Castings, Welding,
Qualifications of Procedures and Personnel
19
266
BS EN ISO 15612:2018
Replaces: BS EN ISO
15612:2004
Specification and qualification of welding
procedures for metallic materials. Qualification
by adoption of a standard welding procedure
specification
14
267
BS EN ISO 10042:2018
Replaces: BS EN ISO
10042:2005
Welding. Arc-welded joints in aluminium and
its alloys. Quality levels for imperfections
28
268
JIS Z 3110:17 Non-destructive testing of welded joints —
Methods of radiographic testing for X- and
gamma-ray techniques with digital detectors
269
JIS Z 3285:17 Solder paste for micro-joining —
Characteristic test methods for solder paste
using fine particles
Chế tạo – Máy công cụ Trở về đầu trang
270
ASTM D8156 -18 Standard Classification System for and Basis
of Specifications for Thermoplastic Elastomer
Copolyester Molding and Extrusion Materials
(TPC)
5
Chế tạo – Xử lý bề mặt và mạ Trở về đầu trang
271
ISO 21164:2018 Metallic and other inorganic coatings — DC
magnetron sputtered silver coatings for
engineering purposes — Measurement of
coating adhesion
4
272
BS ISO 21164:2018 Metallic and other inorganic coatings. DC
magnetron sputtered silver coatings for
engineering purposes. Measurement of coating
adhesion
12
Công nghệ ảnh Trở về đầu trang
273 ISO 19593-1:2018 Graphic technology — Use of PDF to 15
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 20/36
associate processing steps and content data —
Part 1: Processing steps for packaging and
labels
274
ISO 21575:2018 Optics and photonics — Optical materials and
components — The powder test method for the
water resistance of optical glass
4
275
BS ISO 19593-1:2018 Graphic technology. Use of PDF to associate
processing steps and content data. Processing
steps for packaging and labels
24
Công nghệ chăm sóc sức khỏe Trở về đầu trang
276
ISO 80601-2-80:2018
Replaces; ISO 80601-2-
80:2004
Medical electrical equipment — Part 2-80:
Particular requirements for basic safety and
essential performance of ventilatory support
equipment for ventilatory insufficiency
85
277
ISO/TS 23810:2018
Replaces; ISO/TS
23810:2012
Cardiovascular implants and artificial organs
— Checklists for use of extracorporeal
circulation equipment
17
278 ISO 20789:2018 Anaesthetic and respiratory equipment —
Passive humidifiers
45
279
ISO 8637-2:2018 Replaces;
ISO 8637-2:2010
Extracorporeal systems for blood purification
— Part 2: Extracorporeal blood circuit for
haemodialysers, haemodiafilters and
haemofilters
14
280 ISO 8637-3:2018 Replaces:
ISO 8637-3:2010
Extracorporeal systems for blood purification
— Part 3: Plasmafilters
14
281
ISO 80601-2-79:2018
Replaces: ISO 10651-
6:2004
Medical electrical equipment — Part 2-79:
Particular requirements for basic safety and
essential performance of ventilatory support
equipment for ventilatory impairment
76
282
ISO/TR 21954:2018 Guidance on the selection of the appropriate
means of ventilation based on the intended
patient, use environment, and operator
40
283
ISO 80601-2-
13:2011/Amd.2:2018
Medical electrical equipment — Part 2-13:
Particular requirements for basic safety and
essential performance of an anaesthetic
workstation AMENDMENT 2
2
284
IEC 60601-2-54:2009+
AMD1:2015+AMD2:2018
CSV
Medical electrical equipment - Part 2-54:
Particular requirements for the basic safety and
essential performance of X-ray equipment for
radiography and radioscopy
321
285
IEC 60601-2-54:2009/
AMD2:2018
Amendment 2 - Medical electrical equipment -
Part 2-54: Particular requirements for the basic
safety and essential performance of X-ray
equipment for radiography and radioscopy
33
286 BS ISO 8637-3:2018 Extracorporeal systems for blood purification.
Plasmafilters
22
287 JIS T 3228:18 Biopsy needles for single use Clinical glass
thermometers with maximum device
Công nghệ dệt may và da Trở về đầu trang
288 BS EN ISO 5398-1:2018 Leather. Chemical determination of chromic 14
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 21/36
Replaces: BS EN ISO 5398-
1:2007
oxide content. Quantification by titration
289
BS EN ISO 4048:2018
Replaces: BS EN ISO
4048:2008
Leather. Chemical tests. Determination of
matter soluble in dichloromethane and free
fatty acid content
16
290
BS EN ISO 4098:2018
Replaces: BS EN ISO
4098:2006
Leather. Chemical tests. Determination of
water-soluble matter, water-soluble inorganic
matter and water-soluble organic matter
12
291
ASTM D5323 -92(2018)
Replaces: ASTM D5323-
92(2006)
Standard Practice for Determination of
2#x2009;% Secant Modulus for Polyethylene
Geomembranes
4
Công nghệ hóa chất Trở về đầu trang
292
ASTM D2712-18a
Replaces: ASTM D2712-18
Standard Test Method for Determination of
Hydrocarbon Impurities in High Purity
Propylene by Gas Chromatography
7
Công nghệ thông tin Trở về đầu trang
293
ISO/IEC 23008-
2:2017/Amd.3:2018
Information technology — High efficiency
coding and media delivery in heterogeneous
environments — Part 2: High efficiency video
coding AMENDMENT 3: Additional
supplemental enhancement information
46
294
ISO/IEC TR 19583-22:2018 Information technology — Concepts and usage
of metadata — Part 22: Registering and
mapping development processes using
ISO/IEC 19763
23
295
ISO/IEC TR 19583-22:2018 Information technology - Concepts and usage
of metadata - Part 22: Registering and mapping
development processes using ISO/IEC 19763
23
296
ISO/IEC 23008-2:2017/
AMD3:2018
Amendment 3 - Information technology - High
efficiency coding and media delivery in
heterogeneous environments - Part 2: High
efficiency video coding - Additional
supplemental enhancement information
46
297
ISO/IEC 29100:2011/
AMD1:2018
Amendment 1 - Information technology -
Security techniques - Privacy framework -
Clarifications
4
298 ISO/IEC 27005:2018 Information technology - Security techniques -
Information security risk management
56
299 ISO/IEC 27005:2018 Information technology - Security techniques -
Information security risk management
56
300
ISO/IEC 24707:2018 Information technology - Common Logic (CL)
- A framework for a family of logic-based
languages
70
301
ISO/IEC 30140-3:2018 Information technology - Underwater Acoustic
Sensor Network (UWASN) ? Part 3: Entities
and interfaces
21
302
ISO/IEC 30140-4:2018 Information technology? Underwater Acoustic
Sensor Network (UWASN) - Part 4:
Interoperability
16
303 ISO/IEC 24707:2018 Information technology — Common Logic 70
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 22/36
Replaces: ISO/IEC
24707:2007
(CL) — A framework for a family of logic-
based languages
304 ISO/IEC 9899:2018 Information technology - Programming
languages – C
520
305
ISO/IEC 18013-1:2018
Replaces; ISO/IEC 18013-
1:2005
Information technology — Personal
identification — ISO-compliant driving
licence — Part 1: Physical characteristics and
basic data set
81
306
ISO 16461:2018 Intelligent transport systems — Criteria for
privacy and integrity protection in probe
vehicle information systems
16
307
ISO/IEC 20027:2018
Replaces: ISO/IEC
20027:2005
Information technology — Guidelines for slap
tenprint fingerprintture
16
308
ISO/IEC 18745-1:2018
Replaces: ISO/IEC 18745-
1:2014
Test methods for machine readable travel
documents (MRTD) and associated devices —
Part 1: Physical test methods for passport
books (durability)
45
309
ISO/IEC TR 20821:2018 Information technology — Learning, education
and training — Learning environment
components for automated contents adaptation
11
310
ISO/TS 19844:2018
Replaces:
ISO/TS 19844:2016
Health informatics — Identification of
medicinal products (IDMP) — Implementation
guidelines for ISO 11238 for data elements and
structures for the unique identification and
exchange of regulated information on
substances
887
311
ISO 11238:2018 Replaces;
ISO 11238:2012
Health informatics — Identification of
medicinal products — Data elements and
structures for the unique identification and
exchange of regulated information on
substances
61
312
ISO/IEC 14443-4:2018
Replaces: ISO/IEC 14443-
4:2016
Cards and security devices for personal
identification — Contactless proximity objects
— Part 4: Transmission protocol
55
313
ISO/IEC 14443-3:2018
Replaces: ISO/IEC 14443-
3:2016
Cards and security devices for personal
identification — Contactless proximity objects
— Part 3: Initialization and anticollision
56
314
ISO/IEC 15693-1:2018
Replaces: ISO/IEC 15693-
1:2010
Cards and security devices for personal
identification — Contactless vicinity objects
— Part 1: Physical characteristics
5
315
ISO/IEC 15693-1:2018 Cards and security devices for personal
identification - Contactless vicinity objects -
Part 1: Physical characteristics
5
316
ISO/IEC 18013-1:2018 Information technology - Personal
identification - ISO-compliant driving licence -
Part 1: Physical characteristics and basic data
set
81
317 ISO/IEC 20027:2018 Information technology - Guidelines for slap
tenprint fingerprintture
16
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 23/36
318
ISO/IEC TR 20821:2018 Information technology - Learning, education
and training - Learning environment
components for automated contents adaptation
11
319
ISO/IEC 18745-1:2018 Test methods for machine readable travel
documents (MRTD) and associated devices -
Part 1: Physical test methods for passport
books (durability)
45
320
IEC PAS 63178:2018 Smart manufacturing service platform -
Service-oriented integration requirements of
the manufacturing resource/capability
17
321
BS ISO/IEC 24707:2018
Replaces: BS ISO/IEC
24707:2007
Information technology. Common Logic (CL).
A framework for a family of logic-based
languages
78
322
BS ISO/IEC 20027:2018
Replaces: PD ISO/IEC TS
20027:2015
Information technology. Guidelines for slap
tenprint fingerprintture
24
323
BS EN 419241-1:2018
Replaces: PD CEN/TS
419241:2014
Trustworthy Systems Supporting Server
Signing. General System Security
Requirements
46
Công nghệ thực phẩm Trở về đầu trang
324 ISO 5506:2018 Replaces:
ISO 5506:1988
Soya bean products — Determination of
urease activity
6
325
ISO 20636:2018 Infant formula and adult nutritionals —
Determination of vitamin D by liquid
chromatography-mass spectrometry
23
326
ISO 20635:2018 Infant formula and adult nutritionals —
Determination of vitamin C by (ultra) high
performance liquid chromatography with
ultraviolet detection ((U)HPLC-UV)
13
327
ASTM D7481-18 Replaces:
ASTM D7481-09
Standard Test Methods for Determining Loose
and Tapped Bulk Densities of Powders using a
Graduated Cylinder
4
328
BS ISO 5506:2018
Replaces: BS 4325-6:1989,
ISO 5506:1988
Soya bean products. Determination of urease
activity
14
329
BS ISO 20635:2018 Infant formula and adult nutritionals.
Determination of vitamin C by (ultra) high
performance liquid chromatography with
ultraviolet detection ((U)HPLC-UV)
20
330
BS ISO 20636:2018 Infant formula and adult nutritionals.
Determination of vitamin D by liquid
chromatography-mass spectrometry
28
Dầu mỏ Trở về đầu trang
331 ASTM D3527 -18 Replaces:
ASTM D3527-15
Standard Test Method for Life Performance of
Automotive Wheel Bearing Grease
7
332
ASTM D8206-18 Standard Test Method for Oxidation Stability
of Lubricating Greases#x2014;Rapid Small-
Scale Oxidation Test (RSSOT)
8
333 ASTM D6335-18 Replaces:
ASTM D6335-16
Standard Test Method for Determination of
High Temperature Deposits by Thermo-
8
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 24/36
Oxidation Engine Oil Simulation Test
334 ASTM D6080-18 Replaces:
ASTM D6080-12a
Standard Practice for Defining the Viscosity
Characteristics of Hydraulic Fluids
6
335
ASTM D7923-17ae1
Replaces: ASTM D7923-
17a
Standard Test Method for Water in Ethanol
and Hydrocarbon Blends by Karl Fischer
Titration
9
336 ASTM D5018-18 Replaces:
ASTM D5018-89(2015)e1
Standard Test Method for Shear Viscosity of
Coal-Tar and Petroleum Pitches
4
337 JIS K 2246:2018 Rust preventive oils 44
338
BS EN ISO 15138:2018
Replaces: BS EN ISO
15138:2007
Petroleum and natural gas industries. Offshore
production installations. Heating, ventilation
and air-conditioning
146
Dịch vụ. Tổ chức, quản lý và chất lượng công ty Trở về đầu trang
339
ISO 10001:2018 Replaces;
ISO 10001:2007
Quality management — Customer satisfaction
— Guidelines for codes of conduct for
organizations
27
340 ISO 10004:2018 Replaces:
ISO 10004:2012
Quality management — Customer satisfaction
— Guidelines for monitoring and measuring
35
341
ISO 10003:2018 Replaces;
ISO 10003:2007
Quality management — Customer satisfaction
— Guidelines for dispute resolution external to
organizations
36
342
ISO 10002:2018 Replaces;
ISO 10002:2014
Quality management — Customer satisfaction
— Guidelines for complaints handling in
organizations
31
343
ISO/IEC 27005:2018
Replaces: ISO/IEC
27005:2011
Information technology — Security techniques
— Information security risk management
56
344 ISO/TS 30411:2018 Human resource management — Quality of
hire metric
6
345 ISO 19011:2018 Replaces:
ISO 19011:2011
Guidelines for auditing management systems 46
346 ASTM E3172-18 Standard Guide for Reporting Production
Information and Data for Nano-Objects
5
347
BS ISO 10003:2018
Replaces: BS ISO
10003:2007
Quality management. Customer satisfaction.
Guidelines for dispute resolution external to
organizations
46
348
BS ISO 10001:2018
Replaces: BS ISO
10001:2007
Quality management. Customer satisfaction.
Guidelines for codes of conduct for
organizations
32
349
BS ISO 10004:2018
Replaces: BS ISO
10004:2012
Quality management. Customer satisfaction.
Guidelines for monitoring and measuring
46
350
BS ISO 10002:2018
Replaces: BS ISO
10002:2014
Quality management. Customer satisfaction.
Guidelines for complaints handling in
organizations
42
351
BS EN 9115:2018 Replaces:
BS EN 9115:2013
Quality Management Systems. Requirements
for Aviation, Space and Defense
Organizations. Deliverable Software
(Supplement to EN 9100)
30
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 25/36
352
BS ISO 16461:2018 Intelligent transport systems. Criteria for
privacy and integrity protection in probe
vehicle information systems
24
353
JIS Q 17011:2018 Conformity assessment -- Requirements for
accreditation bodies accrediting conformity
assessment bodies
44
354 JIS Q 17025:2018 General requirements for the competence of
testing and calibration laboratories
36
Điện tử Trở về đầu trang
355
BS EN IEC 62610-2:2018 Mechanical structures for electrical and
electronic equipment. Thermal management
for cabinets in accordance with IEC 60297 and
IEC 60917 series. Method for the
determination of forced air cooling structure
24
356
IEC 60358-4:2018 Coupling capacitors and capacitor dividers -
Part 4: DC and AC single-phase capacitor
dividers
26
Đo lường và phép đo Trở về đầu trang
357
IEC 61869-14:2018 Instrument transformers - Part 14: Additional
requirements for current transformers for DC
applications
85
358
IEC 61869-15:2018 Instrument transformers - Part 15: Additional
requirements for voltage transformers for DC
applications
71
359 JIS C 1302:18 Insulation resistance testers
360
JIS Z 4511:2018 X and gamma reference radiation for
calibrating dosemeters and doserate meters and
for determining their response as a function of
photon energy
94
361
JIS B 7071-2:2018 Measuring method for refractive index of
optical glass — Part 2: Vee block
refractometers method
362
ISO 20816-5:2018
Replaces: ISO 20816-
5:2000; ISO 7919-5:2005
Mechanical vibration — Measurement and
evaluation of machine vibration — Part 5:
Machine sets in hydraulic power generating
and pump-storage plants
51
Đóng tàu và kết cấu tàu thủy Trở về đầu trang
363
ISO 21635:2018 Ships and marine technology — Specification
of high manganese austenitic steel used for
LNG tanks on board ships
6
364
ISO 23048:2018 Ships and marine technology — Verification
method for portable power measurement using
a strain gauge
15
365
ISO 17339:2018 Replaces;
ISO 17339:2002
Ships and marine technology — Life saving
and fire protection — Sea anchors for survival
craft and rescue boats
7
366
IEC 61993-2:2018 Maritime navigation and radiocommunication
equipment and systems - Automatic
identification systems (AIS) - Part 2: Class A
302
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 26/36
shipborne equipment of the automatic
identification system (AIS) - Operational and
performance requirements, methods of test and
required test results
367
IEC 61993-2:2018 RLV Maritime navigation and radiocommunication
equipment and systems - Automatic
identification systems (AIS) - Part 2: Class A
shipborne equipment of the automatic
identification system (AIS) - Operational and
performance requirements, methods of test and
required test results
467
368
BS ISO 21635:2018 Ships and marine technology. Specification of
high manganese austenitic steel used for LNG
tanks on board ships
14
369
BS ISO 17339:2018
Replaces: BS ISO
17339:2002
Ships and marine technology. Life saving and
fire protection. Sea anchors for survival craft
and rescue boats
16
Hệ thống truyền dẫn chất lỏng Trở về đầu trang
370
ASTM E1554/E1554M-
13(2018) Replaces: ASTM
E1554/E1554M-13
Standard Test Methods for Determining Air
Leakage of Air Distribution Systems by Fan
Pressurization
12
371
JIS B 8390-2:2018 Pneumatic fluid power -- Determination of
flow-rate characteristics of components using
compressible fluids -- Part 2: Alternative test
methods
48
Máy thông gió. Quạt Trở về đầu trang
372
ASTM E1258 -88(2018)
Replaces: ASTM E1258-
88(2012)
Standard Test Method for Airflow Calibration
of Fan Pressurization Devices
9
Phụ tùng đường ống và đường ống Trở về đầu trang
373
ISO 15874-
2:2013/Amd.1:2018
Plastics piping systems for hot and cold water
installations — Polypropylene (PP) — Part 2:
Pipes AMENDMENT 1
374
ISO 15874-
3:2013/Amd.1:2018
Plastics piping systems for hot and cold water
installations — Polypropylene (PP) — Part 3:
Fittings AMENDMENT 1
1
375
ISO 15874-
5:2013/Amd.1:2018
Plastics piping systems for hot and cold water
installations — Polypropylene (PP) — Part 5:
Fitness for purpose of the system
AMENDMENT 1
1
376
ASTM A53/A53M-18
Replaces: ASTM
A53/A53M-12
Standard Specification for Pipe, Steel, Black
and Hot-Dipped, Zinc-Coated, Welded and
Seamless
23
377 ASTM D2513-18 Replaces:
ASTM D2513-16a
Standard Specification for Polyethylene (PE)
Gas Pressure Pipe, Tubing, and Fittings
17
Thiết bị chứa chất lỏng Trở về đầu trang
378
ISO 21013-2:2007/
Amd.1:2018
Cryogenic vessels — Pressure-relief
accessories for cryogenic service — Part 2:
Non-reclosable pressure-relief devices
1
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 27/36
AMENDMENT 1
Hệ thống và kết cấu cơ khí công dụng chung - Chi tiết lắp
xiết Trở về đầu trang
379 JIS B 1107:18 Hexalobular socket head screws
380 JIS B 1200:18 Fasteners — Hexagon weld nuts with flange
381 JIS B 1217:18 Bolting for use with pipe flanges
Hệ thống và kết cấu cơ khí công dụng chung - Ổ đỡ Trở về đầu trang
382
ISO 7063:2018 Replaces:
ISO 7063:2003
Rolling bearings — Needle roller bearing track
rollers — Boundary dimensions, geometrical
product specifications (GPS) and tolerance
values
11
383
ISO 4386-3:2018 Replaces:
ISO 4386-3:1992
Plain bearings — Metallic multilayer plain
bearings — Part 3: Non-destructive penetrant
testing
10
384 ISO 6525:2018 Replaces:
ISO 6525:1983
Plain bearings — Ring type thrust washers
made from strip — Dimensions and tolerances
7
385 ISO 3547-1:2018 Replaecs:
ISO 3547-1:2006
Plain bearings — Wrapped bushes — Part 1:
Dimensions
11
386
ASTM F2094/F2094M -18a
Replaces: ASTM
F2094/F2094M-18
Standard Specification for Silicon Nitride
Bearing Balls
9
387
ASTM F2730/F2730M-18
Replaces: ASTM
F2730/F2730M-18
Standard Specification for Silicon Nitride
Cylindrical Bearing Rollers
7
388
BS ISO 4386-3:2018
Replaces: BS 7585-3:1992,
ISO 4386-3:1992
Plain bearings. Metallic multilayer plain
bearings. Non-destructive penetrant testing
16
389
BS ISO 7063:2018
Replaces: BS ISO
7063:2003
Rolling bearings. Needle roller bearing track
rollers. Boundary dimensions, geometrical
product specifications (GPS) and tolerance
values
20
390
BS ISO 3547-1:2018
Replaces: BS ISO 3547-
1:2006
Plain bearings. Wrapped bushes. Dimensions 18
Khai thác mỏ và khoáng sản Trở về đầu trang
391
ASTM D5781/D5781M-18
Replaces: ASTM
D5781/D5781M-13
Standard Guide for Use of Dual-Wall
Reverse-Circulation Drilling for
Geoenvironmental Exploration and the
Installation of Subsurface Water Quality
Monitoring Devices
7
Kỹ thuật điện - Cấu kiện thiết bị điện Trở về đầu trang
392 IEC
60205:2016/COR1:2018
Corrigendum 1 - Calculation of the effective
parameters of magnetic piece parts
1
Kỹ thuật điện - Dây và cáp điện Trở về đầu trang
393
IEC 60332-3-10:2018 Tests on electric and optical fibre cables under
fire conditions - Part 3-10: Test for vertical
flame spread of vertically-mounted bunched
wires or cables – Apparatus
44
394 IEC 60332-3-10:2018 RLV Tests on electric and optical fibre cables under 66
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 28/36
fire conditions - Part 3-10: Test for vertical
flame spread of vertically-mounted bunched
wires or cables – Apparatus
395
IEC 60332-3-21:2018 Tests on electric and optical fibre cables under
fire conditions - Part 3-21: Test for vertical
flame spread of vertically-mounted bunched
wires or cables - Category A F/R
25
396
IEC 60332-3-21:2018 RLV Tests on electric and optical fibre cables under
fire conditions - Part 3-21: Test for vertical
flame spread of vertically-mounted bunched
wires or cables - Category A F/R
38
397
IEC 60332-3-22:2018 Tests on electric cables under fire conditions -
Part 3-22: Test for vertical flame spread of
vertically-mounted bunched wires or cables -
Category A
29
398
IEC 60332-3-22:2018 RLV Tests on electric cables under fire conditions -
Part 3-22: Test for vertical flame spread of
vertically-mounted bunched wires or cables -
Category A
43
399
IEC 60332-3-23:2018 Tests on electric and optical fibre cables under
fire conditions - Part 3-23: Test for vertical
flame spread of vertically-mounted bunched
wires or cables - Category B
28
400
IEC 60332-3-23:2018 RLV Tests on electric and optical fibre cables under
fire conditions - Part 3-23: Test for vertical
flame spread of vertically-mounted bunched
wires or cables - Category B
42
401
IEC 60332-3-24:2018 Tests on electric and optical fibre cables under
fire conditions - Part 3-24: Test for vertical
flame spread of vertically-mounted bunched
wires or cables - Category C
28
402
IEC 60332-3-24:2018 RLV Tests on electric and optical fibre cables under
fire conditions - Part 3-24: Test for vertical
flame spread of vertically-mounted bunched
wires or cables - Category C
42
403
IEC 60332-3-25:2018 Tests on electric and optical fibre cables under
fire conditions - Part 3-25: Test for vertical
flame spread of vertically-mounted bunched
wires or cables - Category D
25
404
IEC 60332-3-25:2018 RLV Tests on electric and optical fibre cables under
fire conditions - Part 3-25: Test for vertical
flame spread of vertically-mounted bunched
wires or cables - Category D
38
405 IEC 60332:2018 SER Tests on electric and optical fibre cables under
fire conditions - ALL PARTS
434
406 JIS C 3653:04 Installation methods of power cables buried
ground
Kỹ thuật điện - Phụ kiện điện Trở về đầu trang
407 IEC TR 63158:2018/
COR1:2018
Corrigendum 1 - Equipment for general
lighting purposes - Objective test method for
1
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 29/36
stroboscopic effects of lighting equipment
408
IEC 60320-2-3:2018 Appliance couplers for household and similar
general purposes - Part 2-3: Appliance
couplers with a degree of protection higher
than IPX0
36
409
IEC 60320-2-3:2018 RLV Appliance couplers for household and similar
general purposes - Part 2-3: Appliance
couplers with a degree of protection higher
than IPX0
72
410
IEC 60320-2-4:2018 Appliance couplers for household and similar
general purposes - Part 2-4: Couplers
dependent on appliance weight for engagement
71
411
IEC 60320-2-4:2018 RLV Appliance couplers for household and similar
general purposes - Part 2-4: Couplers
dependent on appliance weight for engagement
112
Kỹ thuật điện - Thiết bị điện để làm việc trong điều kiện đặc
biệt Trở về đầu trang
412
IEC 60079-18:2014/
COR1:2018
Corrigendum 1 - Explosive atmospheres - Part
18: Equipment protection by encapsulation
"m"
1
413 IEC 60079:2018 SER Explosive atmospheres - ALL PARTS 5322
414
ISO/IEC 80079-20-1:2017 Explosive atmospheres - Part 20-1: Material
characteristics for gas and vapour classification
- Test methods and data
176
415
ISO/IEC 80079-20-1:2017/
COR1:2018
Corrigendum 1 - Explosive atmospheres - Part
20-1: Material characteristics for gas and
vapour classification - Test methods and data
1
Kỹ thuật điện - Vật liệu từ Trở về đầu trang
416
IEC 60404-13:2018 Magnetic materials - Part 13: Methods of
measurement of resistivity, density and
stacking factor of electrical steel strip and
sheet
48
Kỹ thuật máy bay và tàu vũ trụ Trở về đầu trang
417 ISO/TS 20991:2018 Space systems — Requirements for small
spacecraft
6
418 ASTM F3117 -18b
Replaces: ASTM F3117-18a
Standard Specification for Crew Interface in
Aircraft
18
419
BS EN 9300-100:2018 Aerospace series. LOTAR. Long Term
Archiving and Retrieval of digital technical
product documentation such as 3D, CAD and
PDM data. Common concepts for Long term
archiving and retrieval of CAD 3D mechanical
information
60
420
BS EN 3745-505:2018
Replaces: BS EN 3745-
505:2007
Aerospace series. Fibres and cables, optical,
aircraft use. Test methods. Cable tensile
strength
8
421
BS EN 4838-004:2018 Aerospace series. Arc fault circuit breakers,
single-pole, temperature compensated, rated
current 3 A to 25 A. 115 V a.c. 400 Hz
14
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 30/36
constant frequency. With signal contact.
Product standard
422
BS EN 9300-115:2018 Aerospace series. LOTAR. LOng Term
Archiving and Retrieval of digital technical
product documentation such as 3D, CAD and
PDM data. Explicit CAD assembly structure
20
423
BS EN 9300-110:2018 Aerospace series. LOTAR. LOng Term
Archiving and Retrieval of digital technical
product documentation such as 3D, CAD and
PDM data. CAD mechanical 3D Explicit
geometry information
424 BS EN 2280:2018 Aerospace series. Steel FE-PM37. 900 MPa ≤
Rm ≤ 1 100 MPa. Sheet. a ≤ 6 mm
10
Luyện kim Trở về đầu trang
425 JIS Z 3147:17 High-speed rotating bar bending fatigue testing
of aluminium alloys and magnesium alloys
426 ISO 4954:2018 Replaces:
ISO 4954:1993
Steels for cold heading and cold extruding 68
427 ISO 12108:2018 Replaces:
ISO 12108:2012
Metallic materials — Fatigue testing —
Fatigue crack growth method
53
428
ASTM E2824-18 Replaces:
ASTM E2824-18
Standard Test Method for Determination of
Beryllium in Copper-Beryllium Alloys by
Phosphate Gravimetric Method
3
429
BS EN ISO 3923-1:2018
Replaces: BS EN ISO 3923-
1:2010
Metallic powders. Determination of apparent
density. Funnel method
12
430
BS EN ISO 4957:2018
Replaces; BS EN ISO
4957:2000
Tool steels 40
431
BS ISO 12108:2018
Replaces: BS ISO
12108:2012
Metallic materials. Fatigue testing. Fatigue
crack growth method
62
May mặc - Giày Trở về đầu trang
432
BS EN ISO 17708:2018
Replaces: BS EN ISO
17708:2003
Footwear. Test methods for whole shoe. Upper
sole adhesion
18
Môi trường - An toàn bức xạ Trở về đầu trang
433
ISO 19461-1:2018 Radiological protection — Measurement for
the clearance of waste contaminated with
radioisotopes for medical application — Part
1: Measurement of radioactivity
18
434
ISO 14146:2018 Replaces:
ISO 14146:2000
Radiological protection — Criteria and
performance limits for the periodic evaluation
of dosimetry services
12
435
BS ISO 14146:2018 Radiological protection. Criteria and
performance limits for the periodic evaluation
of dosimetry services
18
Môi trường - Bảo vệ môi trường Trở về đầu trang
436 ISO 37106:2018 Sustainable cities and communities — 46
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 31/36
Guidance on establishing smart city operating
models for sustainable communities
437 ISO 37120:2018 Replaces:
ISO 37120:2014
Sustainable cities and communities —
Indicators for city services and quality of life
121
438
ASTM D4236-94(2016)e1
Replaces: ASTM D4236-
94(2016)
Standard Practice for Labeling Art Materials
for Chronic Health Hazards
5
Môi trường - Chất lượng đất Trở về đầu trang
439
ISO/TS 20131-2:2018 Soil quality — Easy laboratory assessments of
soil denitrification, a process source of N2O
emissions — Part 2: Assessment of the
capacity of soils to reduce N2O
13
440
ISO/TS 20131-1:2018 Soil quality — Easy laboratory assessments of
soil denitrification, a process source of N2O
emissions — Part 1: Soil denitrifying enzymes
activities
12
441
ISO 20130:2018 Soil quality — Measurement of enzyme
activity patterns in soil samples using
colorimetric substrates in micro-well plates
29
442
ASTM G187-18 Replaces:
ASTM G187-12a
Standard Test Method for Measurement of
Soil Resistivity Using the Two-Electrode Soil
Box Method
6
443
BS ISO 20130:2018 Soil quality. Measurement of enzyme activity
patterns in soil samples using colorimetric
substrates in micro-well plates
32
444
BS EN ISO 17892-12:2018
Replaces: BS 1377-2:1990
Geotechnical investigation and testing.
Laboratory testing of soil. Determination of
liquid and plastic limits
36
Môi trường - Chất lượng không khí Trở về đầu trang
445
ISO 19087:2018 Workplace air — Analysis of respirable
crystalline silica by Fourier-Transform
Infrared spectroscopy
30
446
ASTM D1607-91(2018)e1
Replaces: ASTM D1607-
91(2011)
Standard Test Method for Nitrogen Dioxide
Content of the Atmosphere (Griess-Saltzman
Reaction
5
447
BS ISO 19087:2018 Workplace air. Analysis of respirable
crystalline silica by Fourier-Transform
Infrared spectroscopy
23
Môi trường - Chất lượng nước Trở về đầu trang
448
ISO 16266-2:2018 Water quality — Detection and enumeration of
Pseudomonas aeruginosa — Part 2: Most
probable number method
122
449 ISO 13169:2018 Water quality — Uranium — Test method
using alpha liquid scintillation counting
14
450
ASTM D5784/D5784M-18
Replaces: ASTM
D5784/D5784M-13
Standard Guide for Use of Hollow-Stem
Augers for Geoenvironmental Exploration and
the Installation of Subsurface Water Quality
Monitoring Devices
7
451 ASTM D5872/D5872M-18
Replaces: ASTM
Standard Guide for Use of Casing
Advancement Drilling Methods for
8
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 32/36
D5872/D5872M-13 Geoenvironmental Exploration and Installation
of Subsurface Water Quality Monitoring
Devices
452
BS ISO 16266-2:2018 Water quality. Detection and enumeration of
Pseudomonas aeruginosa. Most probable
number method
130
Môi trường - Chất thải Trở về đầu trang
453 ASTM F2283-12(2018)
Replaces: ASTM F2283-12
Standard Specification for Shipboard Oil
Pollution Abatement System
27
Môi trường - Phòng cháy Trở về đầu trang
454
BS EN ISO 1716:2018
Replaces: BS EN ISO
1716:2010
Reaction to fire tests for products.
Determination of the gross heat of combustion
(calorific value)
36
Môi trường - Phòng chống hàng nguy hiểm Trở về đầu trang
455
BS EN 13317:2018
Replaces: BS EN
13317:2002
Tanks for transport of dangerous goods.
Service equipment for tanks. Manhole cover
assembly
16
456
BS EN 12972:2018
Replaces: BS EN
12972:2015
Tanks for transport of dangerous goods.
Testing, inspection and marking of metallic
tanks
68
Môi trường - Thiết bị bảo vệ Trở về đầu trang
457
ASTM F903-18 Replaces:
ASTM F903-17
Standard Test Method for Resistance of
Materials Used in Protective Clothing to
Penetration by Liquids
12
458
ASTM F2130 (2018)
Replaces: ASTM F2130-11
Standard Test Method for Measuring
Repellency, Retention, and Penetration of
Liquid Pesticide Formulation Through
Protective Clothing Materials
6
459
ASTM F2669 -12(2018)
Replaces: ASTM F2669-12
Standard Performance Specification for
Protective Clothing Worn by Operators
Applying Pesticides
7
Năng lượng và truyền nhiệt - Năng lượng hạt nhân Trở về đầu trang
460
ISO 8528-2:2018 Replaces:
ISO 8528-2:2005
Reciprocating internal combustion engine
driven alternating current generating sets —
Part 2: Engines
13
461 ASTM C1554-18 Replaces:
ASTM C1554-11
Standard Guide for Materials Handling
Equipment for Hot Cells
10
462
ASTM C1215-18 Replaces:
ASTM C1215-92(2012)e1
Standard Guide for Preparing and Interpreting
Precision and Bias Statements in Test Method
Standards Used in the Nuclear Industry
9
Năng lượng và truyền nhiệt - Năng lượng mặt trời Trở về đầu trang
463
IEC 62862-3-2:2018 Solar thermal electric plants - Part 3-2:
Systems and components - General
requirements and test methods for large-size
parabolic-trough collectors
48
464
BS EN 12977-5:2018
Replaces: BS EN 12977-
5:2012
Thermal solar systems and components.
Custom built systems. Performance test
methods for control equipment
48
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 33/36
Năng lượng và truyền nhiệt nói chung Trở về đầu trang
465 IEC ACEE 01:2018 IEC Advisory Committee on energy efficiency
(ACEE) - Introduction to ACEE work
13
466 IEC ACEE 02:2018 IEC Advisory Committee on energy efficiency
(ACEE) - Case study: electric motors
9
467
IEC TS 62600-103:2018 Marine energy - Wave, tidal and other water
current converters - Part 103: Guidelines for
the early stage development of wave energy
converters - Best practices and recommended
procedures for the testing of pre-prototype
devices
61
Nông nghiệp Trở về đầu trang
468
IEC 60335-2-76:2018 Household and similar electrical appliances -
Safety - Part 2-76: Particular requirements for
electric fence energizers
60
469
IEC 60335-2-76:2018 RLV Household and similar electrical appliances -
Safety - Part 2-76: Particular requirements for
electric fence energizers
124
470
ISO 25358:2018 Crop protection equipment — Droplet-size
spectra from atomizers — Measurement and
classification
7
471
BS ISO 25358:2018 Crop protection equipment. Droplet-size
spectra from atomizers. Measurement and
classification
16
Phương tiện giao thông đường bộ Trở về đầu trang
472 ISO 19723-2:2018 Road vehicles — Liquefied natural gas (LNG)
fuel systems — Part 2: Test methods
11
473 ISO 19723-1:2018 Road vehicles — Liquefied natural gas (LNG)
fuel systems — Part 1: Safety requirements
13
474
ISO 16845-2:2018
Replaces; ISO 16845-
2:2014
Road vehicles — Controller area network
(CAN) conformance test plan — Part 2: High-
speed medium access unit — Conformance
test plan
87
475 BS ISO 19723-1:2018 Road vehicles. Liquefied natural gas (LNG)
fuel systems. Safety requirements
22
476 BS ISO 19723-2:2018 Road vehicles. Liquefied natural gas (LNG)
fuel systems. Part 2: Test methods
20
477
BS ISO 16845-2:2018
Replaces: BS ISO 16845-
2:2014
Road vehicles. Controller area network (CAN)
conformance test plan. High-speed medium
access unit. Conformance test plan
98
478 JIS R 3213:2018 Safety glass for rolling stock 28
Sơn và chất màu Trở về đầu trang
479 ISO/TR 19402:2018 Paints and varnishes — Adhesion of coatings 78
Thiết bị gia dụng và thương mại giải trí. Thể thao Trở về đầu trang
480 ASTM F3317-18e1
Replaces: ASTM F3317-18
Standard Consumer Safety Specification for
Infant Floor Seats
10
481 ASTM F2974-18 Replaces:
ASTM F2974-17a
Standard Practice for Auditing Amusement
Rides and Devices
2
482 JIS B 1251:2018 Spring lock washers 50
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 34/36
483
IEC TS 62885-1:2018 Surface cleaning appliances - Part 1: General
requirements on test material and test
equipment
11
Thử nghiệm Trở về đầu trang
484 ASTM D6654-18 Replaces:
ASTM D6654-05(2010)
Standard Practice for Basic Storage Stability of
a Mechanical Pump Dispenser
3
485 ASTM E2192-13(2018)
Replaces: ASTM E2192-13
Standard Guide for Planar Flaw Height Sizing
by Ultrasonics
23
Đồ gốm Trở về đầu trang
486
ISO 21714:2018 Fine ceramics (advanced ceramics, advanced
technical ceramics) — Test method for
determining density of ceramic coatings
6
487
ISO 21113:2018 Fine ceramics (advanced ceramics, advanced
technical ceramics) — Test method for
fracture toughness of monolithic ceramic thin
plates at room temperature
21
488
ASTM C1341 -13: 2018
Replaces: ASTM C1341-13
Standard Test Method for Flexural Properties
of Continuous Fiber-Reinforced Advanced
Ceramic Composites
22
489
ASTM C1525-18 Replaces:
ASTM C1525-04(2013)
Standard Test Method for Determination of
Thermal Shock Resistance for Advanced
Ceramics by Water
8
490
BS ISO 21714:2018 Fine ceramics (advanced ceramics, advanced
technical ceramics). Test method for
determining density of ceramic coatings
12
491
BS ISO 21113:2018 Fine ceramics (advanced ceramics, advanced
technical ceramics). Test method for fracture
toughness of monolithic ceramic thin plates at
room temperature
28
Thủy tinh Trở về đầu trang
492 JIS R 3109:2018 Glass in building -- Destructive-windstorm-
resistant security glazing -- Test method
28
493 JIS R 3209:2018 Insulating glass 16
494 JIS R 3224-1:2018 Glass in buildings -- Insulating glass -- Part 1:
Durability of edge seals by climate tests
36
495 JIS R 3224-3:2018 Glass in buildings -- Insulating glass -- Part 3:
Gas concentration and gas leakage
32
Vi sinh vật Trở về đầu trang
496
ISO 6888-
1:1999/Amd.2:2018
Microbiology of food and animal feeding
stuffs — Horizontal method for the
enumeration of coagulase-positive
staphylococci (Staphylococcus aureus and
other species) — Part 1: Technique using
Baird-Parker agar medium AMENDMENT 2:
Inclusion of an alternative confirmation test
using RPFA stab method
5
Vấn đề chung. Thuật ngữ Trở về đầu trang
497 ASTM E2708-18a
Replaces: ASTM E2708-18
Standard Terminology for Accreditation and
Certification
9
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 35/36
Vật liệu xây dựng và xây dựng nhà Trở về đầu trang
498
ASTM E1998-11(2018)
Replaces: ASTM E1998-11
Standard Guide for Assessing
Depressurization-Induced Backdrafting and
Spillage from Vented Combustion Appliances
14
499 ASTM E779-10(2018)
Replaces: ASTM E779-10
Standard Test Method for Determining Air
Leakage Rate by Fan Pressurization
11
500
ASTM E196-06(2018)
Replaces: ASTM E196-
06(2012)
Standard Practice for Gravity Load Testing of
Floors and Low Slope Roofs
4
501
ASTM E529-04(2018)
Replaces: ASTM E529-
04(2011)
Standard Guide for Conducting Flexural Tests
on Beams and Girders for Building
Construction
3
502
ASTM E564 -06(2018)
Replaces: ASTM E564-
06(2012)
Standard Practice for Static Load Test for
Shear Resistance of Framed Walls for
Buildings
5
503
ASTM E575-05(2018)
Replaces: ASTM E575-
05(2011)
Standard Practice for Reporting Data from
Structural Tests of Building Constructions,
Elements, Connections, and Assemblies
3
504
ASTM E2126-11(2018)
Replaces: ASTM E2126-11
Standard Test Methods for Cyclic (Reversed)
Load Test for Shear Resistance of Vertical
Elements of the Lateral Force Resisting
Systems for Buildings
15
505
ASTM D7897-18 Replaces:
ASTM D7897-15
Standard Practice for Laboratory Soiling and
Weathering of Roofing Materials to Simulate
Effects of Natural Exposure on Solar
Reflectance and Thermal Emittance
10
506 ASTM C806 -18 Replaces:
ASTM C806-12
Standard Test Method for Restrained
Expansion of Expansive Cement Mortar
4
507
ASTM C845/C845M -18
Replaces: ASTM
C845/C845M-12
Standard Specification for Expansive
Hydraulic Cement
3
508
ASTM C1063-18b
Replaces: ASTM C1063-
18a
Standard Specification for Installation of
Lathing and Furring to Receive Interior and
Exterior Portland Cement-Based Plaster
11
509
ASTM C1293-18 Replaces:
ASTM C1293-08b
Standard Test Method for Determination of
Length Change of Concrete Due to Alkali-
Silica Reaction
7
510 ASTM C1872 -18e1
Replaces: ASTM C1872-18
Standard Test Method for Thermogravimetric
Analysis of Hydraulic Cement
7
511
ASTM C1629/C1629M-18
Replaces: ASTM
C1629/C1629M-15
Standard Classification for Abuse-Resistant
Nondecorated Interior Gypsum Panel Products
and Fiber-Reinforced Cement Panels
7
512
BS EN 12604:2017
Replaces: BS EN
12604:2000, BS EN
12605:2000
Industrial, commercial and garage doors and
gates. Mechanical aspects. Requirements and
test methods
18
513
BS ISO 11527:2018
Replaces: BS ISO
11527:2010
Buildings and civil engineering works.
Sealants. Test method for the determination of
stringiness
12
514 ISO/DIS 16478.2 Thermal insulation products for buildings — 46
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 8/2018 36/36
Vacuum insulation panels (VIP) — Products
specification
515
ISO 11527:2018 Replaces;
ISO 11527:2010
Buildings and civil engineering works —
Sealants — Test method for the determination
of stringiness
6
516 ISO 13640:2018 Replaces:
ISO 13640:1999
Buildings and civil engineering works —
Sealants — Specifications for test substrates
5
Viễn thông. Kỹ thuật âm thanh và hình ảnh Trở về đầu trang
517
BS EN IEC 61290-4-3:2018
Replaces: BS EN 61290-4-
3:2015
Optical amplifiers. Test methods. Power
transient parameters. Single channel optical
amplifiers in output power control
28
518
BS IEC 62153-4-8:2018 Metallic cables and other passive components.
Test methods. Electromagnetic compatibility
(EMC). Capacitive coupling admittance
16
519
IEC 62005-9-4:2018 Fibre optic interconnecting devices and passive
components - Reliability - Part 9-4: High
power qualification of passive optical
components for environmental category C
12
520
IEC 62746-10-3:2018 Systems interface between customer energy
management system and the power
management system - Part 10-3: Open
automated demand response ? Adapting smart
grid user interfaces to the IEC common
information model
58
521
IEC 60728-113:2018 Cable networks for television signals, sound
signals and interactive services - Part 113:
Optical systems for broadcast signal
transmissions loaded with digital channels only
86
Xây dựng dân dụng Trở về đầu trang
522
BS EN 16941-1:2018
Replaces: BS
8515:2009+A1:2013
On-site non-potable water systems. Systems
for the use of rainwater
46
523
BS EN 12274-5:2018
Replaces: BS EN 12274-
5:2003
Slurry surfacing. Test method. Determination
of the minimum binder content and wearing
resistance
18
524
BS EN 16727-2-1:2018 Railway applications. Track. Noise barriers
and related devices acting on airborne sound
propagation. Non-acoustic performance.
Mechanical performance under dynamic
loadings due to passing trains. Resistance to
fatigue
22
525 JIS A 1230:2018 Method for dynamic cone penetration test
Để có toàn văn các tiêu chuẩn trên hoặc các tiêu chuẩn khác, vui lòng liên hệ:
Quầy dịch vụ tham khảo – Thư viện Trường ĐH Công nghiệp TP. HCM
12 Nguyễn Văn Bảo, Phường 4, Quận Gò Vấp, TP. HCM
Email: [email protected]
Điện thoại: 0283.8940 390 – 131.