View
232
Download
6
Tags:
Embed Size (px)
DESCRIPTION
Timberland Pro Work Wear
Citation preview
See www.weldspares.co.uk for list pricing© Weldspares 201015.1
Timberland PRO® - Apparel
Code Description PackTIM4261105 105 Parka - Black M-XL EA
105 Waterproof ParkaTimberland PRO® - Apparel
Code Description PackTIM4261115 115 Jacket - Black M-XL EA
115 Packable Rain JacketTimberland PRO® - Apparel
306 Short Sleeve T-Shirt
Code Description PackTIM4261306 306 T-Shirt - Black M-XL EA
• 100% waterproof & windproof parka offering ultimate protection against foul weather conditions• Quilted brushed polyester lining providing warmth• Short ergonomic cut with preformed sleeves enhancing freedom of movement• Fleece lined collar & removable, adjustable hood with visor• Storm channel on front double zip cover for water resistance & comfort• High density polyester yokes on pocket entries, elbows & cuffs offering extra durability
• 100% waterproof & windproof, breathable & packable rain jacket• Ultimate protection against wet weather conditions• Lightweight & soft providing all day comfort• Packs into itself for easy to carry convenience• Storm flap with an easy open snap-button flap for water resistance & comfort• Advanced functional jacket adding comfort & fit: relaxed hand pockets, zip chest pocket, wrist adjusters, ergonomic integrated hood, draw cord stoppers
• Comfortable pre-shrunk 100% cotton T-shirt• Round ribbed collar with reinforcement offering durability & comfort
armvp armvp brltp
100% Oxford nylon100% Polyester high density reinforcement 100% Polyester 100% Jersey cotton
NEW
See www.weldspares.co.uk for list pricing© Weldspares 201015.2
Timberland PRO® - Apparel
315 Recycled Polar FleeceTimberland PRO® - Apparel
316 Bomber Hooded SweatshirtTimberland PRO® - Apparel
318 Short Sleeve Polo
Code Description PackTIM4261318 318 Polo - Black M-XL EA
• Heavy micro-breathable polar fleece made from 100% recycled plastic bottles (fabric composition: 100% recycled polyester)• Eco-conscious product• Particularly soft & warm for unsurpassed comfort• Technical fit & preformed sleeves ensuring better freedom of movement• 2 bottom pockets, 1 zipped breast pocket, draw cord stoppers, elasticated cuffs adding fit, comfort & protection
• Hooded robust sweatshirt providing comfort & durability• Heavily padded lining offers optimal thermal insulation• Ribbed cuffs provide wind protection & increased comfort• Reinforced pocket entries with rivets, triple needle stitching in strategic areas, YKK® front zipper add wear time• 2 bottom kangaroo pockets for convenience
• Lightweight & durable cotton piqué polo for all weather wear• Reinforced flexible 3 button tab with rubber buttons & reinforced side vents providing added wear time & durability• No-itch printed label on fabric offering comfort
brjtp brltp
100% Cotton piqué100% Recycled Polyester
Code Description PackTIM4263315 315 Fleece - Black M-XL EA
Code Description PackTIM4261316 316 Sweatshirt - Black M-XL EA
brjtn
80% Cotton20% Polyester
NEW
NEW
NEW
See www.weldspares.co.uk for list pricing© Weldspares 201015.3
606 Lightweight Work Trousers 612 Knee Pad Trousers 330 Long Sleeve Polo
• Quick dry, highly comfortable & soft fabric• High abrasion resistance & colour stability due to mixed synthetic content• Ergonomic cut, elasticated waist, pre-shaped knees & lined seat add comfort & better wear resistance• 8 highly functional multiple pockets including measuring tape compartment provide storage, security & comfort• High density polyester reinforcements on pocket entries & trouser back resist daily wear & tear• Key loop & hammer loop add functionality• Triple needle stitching in strategic areas increases product life
• Durable, functional & comfortable trousers in 100% cotton drill twill to combine comfort and resistance• Multi-pocket trousers: 2 large front pockets, 1 ticket pocket, 1 mobile phone pocket, 2 back pockets closed by reinforced flap, meter/pen pockets on lateral side, hammer loop• High density polyester reinforcement on pocket entries, knee pad pockets & bottom trousers to resist a daily wear & tear and maximise the trousers wear time
• 100% jersey cotton long sleeve polo for additional comfort & durability• Reinforced button tabs, side slits, rubber buttons for added wear time
Timberland PRO® - Apparel Timberland PRO® - Apparel Timberland PRO® - Apparel
Code Description PackTIM4261330 330 Polo - Coal M-XL EA
brktp brp
100% Jersey cottonRib cuffs: 100% cotton
Code Description PackTIM4264606 606 Trousers - Beige M-XL EA
Code Description PackTIM4261612 612 Trousers - Black M-XL EA
brvp
100% Cotton drill twillReinforcements: 100% high density polyester
48% Cotton11% Polyamide41% Polyester high density reinforcement
See www.weldspares.co.uk for list pricing© Weldspares 201015.4
Timberland PRO® - Apparel
armvp
Code Description PackTIM4261328 328 Fleece - Coal M-XL EA
100% Polyester of which 65% Recycled
Lining: 100% Polyester tricot brushed
328 Recycled Light Fleece
• Ultra light & breathable microfleece for comfort & thermal insulation• 65% recycled polyester, 35% polyester for added durability and to take care of the environmental concerns• Slim fit fleece for a better freedom of movement. Possibility to wear it alone or under another garment as a second layer• 2 lateral zip pockets, 2 front zip pockets, full length zip, elasticated cuffs, drawcord stoppers for additional convenience & storage
Size Tables
Trousers
Size Waist (cm)
S 77 - 80
M 81 - 84
L 85 - 88
XL 89 - 92
XXL 93 - 96
XXXL 97 - 100
Other Apparel
Size
S 85 - 92
M 93 - 100
L 101 - 108
XL 109 - 116
XXL 117 - 124
XXXL 125 - 132
See www.weldspares.co.uk for list pricing© Weldspares 201015.5
Timberland PRO® - Footwear Timberland PRO® - FootwearTimberland PRO® - Footwear
• Water resistant upper• Reinforced ankle padding for maximum comfort all day long• Nylex moisture management lining keeps feet dry• Gusseted tongue keeps out dirt & debris• Contoured & removable foot bed decreases foot fatigue• Anti-puncture steel midsole• Midsole featuring shock absorbing EVA offers lightness & flexibility• Cemented sole construction & Timberland PRO® Nitrile rubber outsole ensure slip & heat resistance up to 300°C, high resistance to fuel oil, optimal abrasion resistance
• Premium oiled leather upper minimises break-in time• Comfort engineered ankle padding• Nylex moisture management lining keeps feet dry• Gusseted tongue keeps out dirt & debris• Contoured & removable foot bed decreases foot fatigue• Midsole features shock absorbing EVA offering lightness & flexibility to the shoes• Cemented sole construction & Timberland PRO® Nitrile outsole ensure slip & heat resistance up to 300°C, high resistance to fuel oil, shock absorption & abrasion resistance
Euro Hiker Boots Athletic Trainers Splitrock PRO Boots
Code Description PackTIM6201042 9-11 - Black EATIM6201043 9-11 - Gaucho EATIM6201044 9-11 - Wheat EA
Code Description PackTIM6201014 9-11 - Gaucho EATIM6201017 9-11 - Black EA
Code Description PackTIM6201022 Athletic Trainers - 9-11 EA
EN345-1
SB
EN347-1
S3
ISO 20345
HRO SRB
• Suede leather upper with lateral ventilations for breathability• Scuff cap provides optimal abrasion resistance.• Plastic lace holder reinforcements enable easy lacing & increased product lifespan• Internal mesh lining keeps feet dry• Soft pre-moulded antibacterial, antistatic & removable foot bed decreases foot fatigue & provides easy care• Midsole featuring shock absorbing EVA offers lightness & flexibility• Cemented sole construction & high traction design nitrile rubber outsole ensure slip & heat resistance up to 300°C & abrasion resistance
See www.weldspares.co.uk for list pricing© Weldspares 201015.6
• Premium water resistant nubuck leather upper• Gusseted tongue keeps out job-site dirt & debris• Non-metallic toe cap provides roomier fit at the front of the shoe & keeps the cold out• Comfort engineered ankle padding• Moisture management lining keeps feet dry• Contoured & removable foot bed decreases foot fatigue• Antistatic textile & anti-puncture midsole made from high tenacity fibres offers 100% puncture resistance whilst remaining flexible• Good year welted construction & Timberland PRO® rubber welted outsole ensure increased durability, slip & heat resistance up to 300°C, high resistance to fuel oil, excellent shock absorption & optimal abrasion resistance
• Premium oiled full grain leather for comfort & robustness• Water resistant• Exclusive Timberland PRO lacing system to adapt the support & the lacing efficiency• Comfort engineered ankle padding• Gusseted tongue keeps out job site dirt & debris• Coolmax lining & qualitative insole to keep feet dry• Insole composed with vegetal leather & recycled foam• Antistatic, non-metallic & anti-perforation midsole offers puncture resistance whilst remaining extremely flexible• PU/TPU injected construction outsole ensures optimal resistance to abrasion, slip resistance, lightness & flexibility, excellent shock absorption
Code Description PackTIM6201060 Traditional Boots - 9-11 EA
Code Description PackTIM6201061 Snyders Boots - 9-11 EA
Timberland PRO® - FootwearTimberland PRO® - Footwear
Traditional Boots Snyders Boots
E HROSBP WRU SRA
ISO 20345 ISO 20345
S3 SB
S3
HRO
SRB
E
SBP
WRU
SRA
Anti-static, shock absorption at the heel, water resistant upper, perforation resistant
Safety Basic
Perforation resistant
Slip resistant on ceramic tile
Slip resistant on steel
Shock absorbing at the heel
Resistance of the outsole to heat up to 300°C
Water resistant upper
Toe cap protection: 200J non-metallic
Toe cap protection: 200J Steel
NEW
Improved
Technology Key Explanations
See www.weldspares.co.uk for list pricing© Weldspares 201015.8
• Water repellent grain goatskin leather palm with reinforced rubber patches on palm & fingers provides outstanding grip, high flexibility & added abrasion resistance• Lycra® nylon back laminated with a water repellent breathable membrane offers flexibility, ventilation & dryness• Adjustable elasticated wrist featuring a self-fastening system ensures consistent & comfortable fit• Double needle stitching on the rubber patches ensures added durability
• Soft & thin polyurethane microfibre on palm & fourchettes offers outstanding flexibility & dexterity• Lycra® nylon back laminated with a water repellent breathable membrane offers flexibility, ventilation & dryness• Adjustable elasticated wrist featuring a self-fastening system ensures consistent & comfortable fit• Machine washable
• Water repellent nylon fabric coated with Polyurethane offers optimal flexibility & dexterity• Rubber reinforcements on the palm add abrasion resistance, excellent grip & durability• Fully lined with jersey offers comfort & warmth• Adjustable elasticated wrist system ensures consistent & comfortable fit• Hanging hook & ring for convenience
Timberland PRO® - Gloves Timberland PRO® - GlovesTimberland PRO® - Gloves
Extra Grip Taktyl Wind Comfort
Code Description PackTIM2055506 Wind Comfort Gloves - 9-10 EA
Code Description PackTIM2055501 Extra Grip Gloves - 9-10 EA
Code Description PackTIM2055502 Taktyl Gloves - 9-10 EA
EN3883122
EN420EN3882111
EN420EN3884122
EN420EN511110
15.See www.weldspares.co.uk for list pricing© Weldspares 201015.9
• Excellent abrasion resistance• Heatlock lining provides excellent thermal insulation• Convenient hook & ring to hang the gloves• Water repellent goatskin leather on the palm for optimal flexibility• Water repellent breathable Lycra® nylon & fabric on the back ensure perfect fit & ventilation• 50mm cuff in woven nylon keeps sleeves dry & warm• Self-fastening system on back & palm
Hints & TipsTimberland PRO® - Gloves
Warm Effect
Code Description PackTIM2055507 Warm Effect Gloves - 9-10 EA
EN3883122
EN420EN511120
This measurement in inches is closest to your actual glove size. For example, 7” is a size 7 glove.
Sizes may vary between different manufacturers and styles. Except where mentioned, gloves are sized according to men’s hands.
For easy size comparison, see table below.
Hand Circumference Method
Measure the circumference of your hand around the palm area with fingers together and hand relaxed.
Numerical Size 6-7 7-8 8-9 9-10 11
General Size XS S M L XL
Tips for using Safety Gloves1. Check whether you are using the correct type of gloves for the work you are about to do.2. Do not allow gloves to wear excessively.3. Check gloves for defects.4. Do not use gloves for longer than is deemed safe.5. Store gloves safely. Leaving gloves with chemical contamination lying around, may be hazardous for others.6. Remove gloves carefully to avoid any skin contact with contamination on the glove surface.7. Do not share gloves with others. The inside of a glove is a great breeding place for bacteria & bacilli.8. Wash your hands before putting on gloves. Clean hands (free from bacteria) prevent rapid bacteria cultivation inside the glove. Wash your hands again after using the gloves.9. Treat and cover cuts or abrasions before putting on gloves.10. Never ignore rashes or skin irritations. Skin problems, such as dermatitis, may cause disability. It is of great importance to obtain professional advice from a Dermatologist or your GP immediately.
Hints
Tips
© Weldspares 2010
European Standards & Certification
Safety Footwear with 200J toe cap
EN 345
Occupational Footwear without a toe cap
EN 347
Safety Footwear with 200J toe cap
ISO 20345:2007 guarantees:
• A level of acceptable quality in terms of comfort & wear resistance as defined by an agreed European standard
• The presence of a safety toe cap providing protection against a shock of 200J and against collapse under a load of 1500 daN
ISO 20345:2007
General requirements in glove protection
EN 420
Protection against mechanical risksEN 388
Protection against cold temperaturesEN 511
Products without legitimate certification may damage your health irreversibly.
All products shown in this catalogue are independently tested to meet their EN standards.
Copies of test certification are available on request.
EN345-1
EN347-1
ISO 20345
EN3883122
EN420
1 2 3 4 5
A. Abrasion resistance- in number of cycles
>100 >500 >2000 >8000 -
B. Cutting resistance- (slicing) - index
> 1,2 >2,5 >5,0 >10,0 >20,0
C. Tear resistance- in newtons
>10 >25 >50 >75 -
D. Perforation resistance- in newtons
>20 >60 >100 >150 -
X. Not tested for this hazard
1 2 3 4 5
A. Resistance to conductive cold- thermal insulation in m² ºC/W
≥ 0,10 ≥ 0,15 ≥ 0,22 ≥ 0,30 -
B. Resistance to contact (cold)- thermal resistance in m² ºC/W
≥ 0,025 ≥ 0,050 ≥ 0,100 ≥ 0,150 -
C. Water permeability- Level1Watertight/minimum 30mm
X. Not tested for this hazard
EN511110