TIDESGLAZED PORCELAIN FLOOR & WALL TILE

Florida Tile’s TidesHDP is a stylized interpretation of vein cut stone — specifically a linear cut Travertine or Limestone known as “Georgette”. It is a stunning linear play of tone-on-tone colors that creates a contemporary aesthetic.

Using Florida Tile’s HDP-High Definition Porcelain technology, we not only reproduce this stone look, but we are able to let our imaginations go wild with bold color combinations that can’t be found in nature. From cool blues to steel gray and dark brown, we created contemporary colors that can be specified in any commercial space. Each color has a unique tonal blend within

its veining to add interest and depth, and pairs beautifully with other design finishes.

This glazed porcelain floor and wall tile is available in pressed 12x24 with a 3x24 bullnose for each color. We have also added a unique, patterned M12 mosaic that rotates each chip 90 degrees to create a wonderful checkerboard pattern. With the exception of select trim and decorative pieces, this product line is Made in the USA of 40% pre-consumer recycled content, is GREENGUARD®Certified and Porcelain Tile Certified, and meets the DCOF AcuTest requirements to be installed in wet areas.

TIDESshown on front: 28130 12x24 Sand Castle

below: 28115 12x24 Marine Fog & 28130/M12 Sand Castle Mosaic

SEA SALT

28110 12x24Sea Salt

28110 3.75x12Sea Salt

28110/M12Sea Salt Mosaic

above: 28110 12x24 Sea Salt

MARINE FOG

28115 12x24Marine Fog

28115/M12Marine Fog Mosaic

above: 28115 12x24 Marine Fog & 28130/M12 Sand Castle Mosaic

28115 3.75x12Marine Fog

SAND CASTLE

28130 12x24Sand Castle

28130/M12Sand Castle Mosaic

above: 28130 12x24 Sand Castle

28130 3.75x12Sand Castle

COCONUT SHELL

28190 12x24Coconut Shell

28190 /M12Coconut Shell Mosaic

above: 28190 12x24 Coconut Shell

28190 3.75x12Coconut Shell

WATERS EDGE

28155 12x24Waters Edge

28155/M12Waters Edge Mosaic

above: 28155 12x24 Waters Edge

28155 3.75x12Waters Edge

above: 28130 12x24 Sand Castle

TIDES

Color reproductions in this printed piece may vary from actual tile colors.Final selection should be made from actual tile samples.

Color, texture, and finish variations may occur due to the nature of the product.

1 These values may vary from lot to lot. 2 These values are based on actual sizes including the grout joint. 3 May not apply to textured surfaces or tiles with uneven back patterns such as mesh mounted mosaics.

www.floridatile.com#48855LT 7/20

1 Values are offered in good faith as being accurate and typical of normal production. Due to the natural variation of raw materials and manufacturing processes, the values of the purchased product for any particular installation may vary.2 ANSI® A137.1 standard, ceramic tiles selected for level interior spaces expected to be walked upon when wet must have a minimum wet DCOF AcuTest® value of 0.42.3 Average production value.4 Please visit www.floridatile.com/intended-use for further details.

are registered trademarks in the U.S. of Florida Tile, Inc.© 2020&

Porcelain Technical DataProperties (Floor)

ASTM® ANSI® Results1

DCOF AcuTest®2 A137.1 ≥ 0.42 Pass

Surface Hardness Mohs Scale N/A 7 Mohs

Break Strength C-648 ≥ 250 lbf. ≥ 510 lbf. avg.

Water Absorption C-373 ≤ 0.5% ≤ 0.5%3

Intended Use4 N/A N/A ResidentialLight Commercial

Field TileNominal Size (in)¹

Metric (cm) Pcs./Sq Ft2 Thickness3 Edge

3.75x12 9.5x30 3.27 10mm Rectified

12x24 30x60 .5 10mm Pressed

Trim Shape Sku Nominal Size (in) Metric (cm)

Bullnose P43N9 3x24 7.5x60

Color Variation

V2 Slight Variation Clearly distinguishable differences in texture and/or pattern with similar colors.

Typical Uses

TidesHDP glazed porcelain floor and wall tile is appropriate for all standard residential and commercial wall, countertop, backsplash, and most floor applications.

Notice: Not all flooring products are suitable for wet areas, specialized applications, or commercial use. Please refer to the American National Standard Specifications for Ceramic Tile (ANSI® A137.1) for ceramic, stone, and glass installation for specific usage and installation information.

This Florida Tile product will contribute to USGBC LEED® points and the ANSI® approved NAHB® Green Building Points.