29
Think Automation and beyond… IDEC Safety Products Overview

Think Automation and beyond… IDEC Safety Products Overview

Embed Size (px)

Citation preview

Page 1: Think Automation and beyond… IDEC Safety Products Overview

Think Automation and beyond…

IDEC Safety Products Overview

Page 2: Think Automation and beyond… IDEC Safety Products Overview

Think Automation and beyond…

Safety Products Offering Light Curtains Interlock Switches Safety Relays and Controller Grip Switches Enabling Switches Emergency Stop Switches

Page 3: Think Automation and beyond… IDEC Safety Products Overview

Think Automation and beyond…

Datalogic Light Curtains

Full access to Datalogic photoelectric sensors & light curtains– http://www.datalogic.com– #1 Sensors in Europe

Page 4: Think Automation and beyond… IDEC Safety Products Overview

Think Automation and beyond…

Datalogic Light Curtains

Series Features

SG2 BASE • Type 2 Light Curtains • Simple, reliable and cost effective solution for guarding lower-risk applications, where the result of an accident is only a slight injury • Hand or arm protection• 150mm – 1800mm Protective Height• 30mm, 50mm, and 90mm resolution• Up to 19m operating distance• Fast response time, 8 to 24ms; installation close to dangerous areas, reducing the overall machine dimensions• IP65

Page 5: Think Automation and beyond… IDEC Safety Products Overview

Think Automation and beyond…

Datalogic Light Curtains

Series Features

SG2 EXTENDED • Type 2 Light Curtains• Simple, reliable and cost effective solution for guarding lower-risk applications, where the result of an accident is only a slight injury • Hand or arm protection• 150mm – 1800mm Protective Height• 30mm, 50mm, and 90mm resolution• Up to 19m operating distance• Fast response time, 8 to 24ms; installation close to dangerous areas, reducing the overall machine dimensions• EDM function: Option to connect the outputs to forced guided relays and maintain the same safety category• IP65

Page 6: Think Automation and beyond… IDEC Safety Products Overview

Think Automation and beyond…

Datalogic Light Curtains

Series Features

SG4 BASE • Type 4 Light Curtains• OSHA or ANSI standard for the highest safety performance level• Finger or Hand Protection• 150mm – 1800mm Protective Height• 14mm and 30mm resolution• Up to 19m operating distance• Fast response time, 8 to 24ms; installation close to dangerous areas, reducing the overall machine dimensions• EDM function: Option to connect the outputs to forced guided relays and maintain the same safety category• IP65

Page 7: Think Automation and beyond… IDEC Safety Products Overview

Think Automation and beyond…

Datalogic Light Curtains

Series Features

SG BODY COMPACTBASE and MUTING

• Type 2 and Type 4 Light Curtains• Body protection• SG BODY COMPACT BASE

• EDM function• SG BODY COMPACT MUTING

• Integrated muting function• Compact profile: 35x40 mm• Operating distance up to 50 m• 2, 3, 4 beams with 500, 800, 900 and 1200 mm controlled heights

Page 8: Think Automation and beyond… IDEC Safety Products Overview

Think Automation and beyond…

Datalogic Light Curtains

Series Features

SG BODY BIGBASE and MUTING

• Type 2 and Type 4 Light Curtains• Body and hand protection• Sturdy housing for harsh environments• SG BODY BIG BASE

• EDM function• SG BODY BIG MUTING

• Integrated muting function• Big sturdy profile: 52x56 mm (2.08x2.24 in)• Operating distance up to 60 m• 2, 3, 4 beams with 500, 800, 900 and 1200 mm controlled heights• LONG RANGE model with 40mm resolution for hand protection over long distance (60 m)

Page 9: Think Automation and beyond… IDEC Safety Products Overview

Think Automation and beyond…

Datalogic Light Curtains

Series Features

SG BODY REFLECTOR BASE and MUTING

• Type 4 Light Curtains• Body protection• Consist of one active and one passive part, thus reducing installation, wiring time and costs.• Big sturdy profile: 52x56 mm (2.08x2.24 in)• Operating distance up to 8 m• 2, 3, 4 beams with 500, 800, 900 and 1200 mm controlled heights

Page 10: Think Automation and beyond… IDEC Safety Products Overview

Think Automation and beyond…

Datalogic Light Curtains

Series Features

SG2 MUTING • Type 2 Light Curtains• Hand protection• 30 mm Resolution• Zero Dead Zone• Up to 20 m operating distance• 300-1800 mm controlled height• Integrated muting function

Page 11: Think Automation and beyond… IDEC Safety Products Overview

Think Automation and beyond…

Datalogic Light Curtains

Series Features

SG4 EXTENDED • Type 4 Light Curtains• Hand and finger protection• 14 mm (finger) or 30 mm (hand)• Compact dimensions (35 x 41 mm)• Zero dead zone• Up to 20 m operating distance• 300-1800 mm controlled height• Cascade up to 3 units• Integrated muting function• Integrated fixed and floating blanking function• Dongle (accessory) for:  - Configuration cloning  - Ethernet (Tcp/Ip connection)  - Remote monitoring  - Remote programming  - Error logging

Page 12: Think Automation and beyond… IDEC Safety Products Overview

Think Automation and beyond…

Light Curtains

Series Features

SE4D • Type 4 Light Curtains• Hand protection• 230mm – 1910mm Protective Height• 20mm resolution• Up to 9m operating distance• Integrated Functions

• No dead zone • EDM Functions• Muting Functions• Fix/Float Blanking Functions• Cascade (up to 3 systems)

• IP65, IP67• Selectable PNP/NPN (x2) outputs• Slim profile 28 x 30mm

Page 13: Think Automation and beyond… IDEC Safety Products Overview

Think Automation and beyond…

Interlock Switches

Standard Series Features

HS6B • Subminiature and slim profile• 78 x 30 x 15mm

• Two actuator entrances• Contact Configuration

• 1NC/NO, 2NC, 2NC/1NO, 3NC• Cable lengths: 1m, 3m, 5m• IP67

HS5D • Miniature profile• 91 x 30 x 30mm

• Models with Plastic or Metal head• Detects detachment of head• Contact Configuration

• 1NC/NO, 2NC, 2NC/1NO, 3NC• Models with conduit size: G1/2, PG13.5, M20• IP67

Page 14: Think Automation and beyond… IDEC Safety Products Overview

Think Automation and beyond…

Interlock Switches

Standard Series Features

HS5B • Miniature profile• 91 x 30 x 30mm

• Models with Plastic or Metal head• Contact Configuration

• 1NC/NO, 2NC• Models with conduit size: G1/2, PG13.5, M20• IP67

HS2B • 98 x 57 x 40mm profile• Three conduits opening• Models with green/red LED indicator• Contact Configuration

• 1NC/1NO• IP67

Page 15: Think Automation and beyond… IDEC Safety Products Overview

Think Automation and beyond…

Interlock Switches

Standard Series Features

HS1B • Rugged aluminum die-cast housing• Three conduits opening• Models with green/red LED indicator• Contact Configuration

• 1NC/1NO, 2NC• IP67

Page 16: Think Automation and beyond… IDEC Safety Products Overview

Think Automation and beyond…

Interlock Switches

Solenoid Locking Features

HS6E • Subminiature slim profile• 75 x 15 x 75mm

• Spring or Solenoid lock types• Manual unlocking possible on three sides• Contact Configuration

• 1NC+1NC(Main)/2NC(Actuator)/1NO(Solenoid)• Cable lengths: 1m, 3m, 5m• IP67

HS5E • 35 x 40 x 146mm• Spring or Solenoid lock types• Models with LED indicator• Models with Rear unlock button and LED indicator• Contact Configuration

• 1NC+1NC(Main) and1NO/1NC or 2NC (Aux.)• Cable lengths: 1m, 3m, 5m• IP67

Page 17: Think Automation and beyond… IDEC Safety Products Overview

Think Automation and beyond…

Interlock Switches

Solenoid Locking Features

HS1E • Full size 104 x 35 x 129mm• Spring lock type (power to unlock)• Models with green/red LED indicator• Models with unlock key and LED indicator• Contact Configuration

• 2NC(Main) & 1NO/1NC/2NO/2NC (Monitor)• IP67

HS1C • Full size 106 x 35 x 125mm• Rugged Die-cast aluminum body• Spring lock type (power to unlock)• Manual unlock possible with special tool• Models with green/red LED indicator• Contact Configuration

• 2NC(Main) & 1NO/1NC/2NO/2NC (Monitor)• IP67

Page 18: Think Automation and beyond… IDEC Safety Products Overview

Think Automation and beyond…

Interlock SwitchesSolenoid Locking Features

HS1L • Full size 104 x 35 x 129mm• Spring or Solenoid lock types• Models with green/red LED indicator• Models with Conduit size: G1/2, PG13.5, M20• 6 contacts configuration

• 2NC (main) and 4 monitor contacts• IP67

Key Locking Features

HS5E-K • Compact size 35 x 40 x 146 mm• Head removal detection circuitry• Spring lock type (power to unlock)• Available with rear unlocking button for emergency escape• 16 types of key numbers are available• 4 contacts configuration

Page 19: Think Automation and beyond… IDEC Safety Products Overview

Think Automation and beyond…

Interlock Switches

Non-Contact Features

HS7A - Magnetic • Compact size 7 x 16 x 51mm• 2 or 3 contacts configuration type

• HS7A-DMC (1NO+1NC or 2NO)• HS7A-DMP (1NO+2NC or 2NO+1NC)

• Models with 2m, 5m, and 10m cable length• Models with LED indicator• Up to 36 sets can be connected (safety relay module: HR1S-DME)• IP67

HS3A - RFID • RFID non-contact interlock switch• Category 4 and PLe (EN/ISO 13849-1) compliant• 3 contacts configuration (2 safety&1 monitor outputs)• Multicode or unicode sensor heads are available

• Unicode – one sensor head corresponds to one actuator

• IP67, IP69K

Page 20: Think Automation and beyond… IDEC Safety Products Overview

Think Automation and beyond…

Safety Relays and ControllerSafety Relay Features

HR1S • HR1S-AC%• 1NC or 2NC inputs for Estops or Interlocks• PLe, Safety Cat 3,SIL 3• 3NO and 1NO Auxiliary outputs

• HR1S-AF%• 2NC inputs for Estops or Interlocks• PLe, Safety Cat 4, SIL 3• 3NO outputs

• HR1S-DM%• 2 or 6 inputs type for Magnetic Safety Switches• PLe, Safety Cat 4, SIL 3• 2NO and 2NO Auxiliary outputs

• HR1S-ATE%• 2NC inputs for Estops or Interlocks • Time Delay outputs• PLe, Safety Cat 4, SIL 3• 2NO, 3NO Time Delay, and 4NO Aux outputs

Page 21: Think Automation and beyond… IDEC Safety Products Overview

Think Automation and beyond…

Safety Relays and ControllerSafety Relay Features

HR2S • HR2S-301%• 2 inputs for Light Curtains, Estops, or Interlocks• PLe, Safety Cat 3 or 4• 3NO and 1NO Auxiliary outputs• Removable terminal blocks

• HR2S-332N%• 2 inputs for Estops or Interlocks• PLe, Safety Cat 4• 3NO, 3NO Time Delay and 2NC Aux outputs• Removable terminal blocks

Page 22: Think Automation and beyond… IDEC Safety Products Overview

Think Automation and beyond…

Safety Relays and Controller

Safety Controller Features

FS1A • Suitable for replacing multiple Safety Relay modules• No programming and validation required. Configure by turning on a logic switch• One controller can connect with various Light Curtains, Interlock Switches and Estops• 12 safety inputs, 4 safety outputs• Complies with EN954-1 Category 4, IEC 61508 SIL3, ISO 13849-1 Performance Level e (PLe)• 8 or 24 Logics

Page 23: Think Automation and beyond… IDEC Safety Products Overview

Think Automation and beyond…

FS1A Safety Controller

Page 24: Think Automation and beyond… IDEC Safety Products Overview

Think Automation and beyond…

FS1A Safety Controller

Page 25: Think Automation and beyond… IDEC Safety Products Overview

Think Automation and beyond…

FS1A Safety Controller

Page 26: Think Automation and beyond… IDEC Safety Products Overview

Think Automation and beyond…

Grip SwitchesSeries Features

HE1G • 3-position Off-On-Off • 2 NO contacts• Available with 1NC or without Monitor switch• Optional E-stop or Momentary pushbutton• HE1G-L Light Force

• Lighter operating force to ON position• Models with Terminal or Connector type

• IP66

HE2G • Compact, light-weight for comfortable hold• Light operating force• Models with Terminal or Connector type• Available models

• E-stop, E-stop and pilot light, two momentary pushbuttons, E-stop and two momentary pushbutton, E-stop with pushbutton and Key switch

Page 27: Think Automation and beyond… IDEC Safety Products Overview

Think Automation and beyond…

Enabling SwitchesPanel Mount Features

HE1B • 3-position functionality (OFF – ON –OFF)• Ideally suited for use as enabling (aka “deadman”) switch on teach pendants• 1NO contact

HE2B • 3-position functionality (OFF-ON-OFF) • Redundant (Double) Enabling Switch• DPDT contacts• Models with up to 2 Push and 2 Return monitor contacts• Available with or without rubber cover

HE3B• 3-position functionality (OFF-ON-OFF) • Mounts into a standard 16mm panel• DPDT contacts• Available with or without rubber cover

Page 28: Think Automation and beyond… IDEC Safety Products Overview

Think Automation and beyond…

Enabling SwitchesPanel Mount Features

HE5B • Ergonomically-designed 3-position OFF-ON-OFF• Mounts into a standard 16mm panel• DPDT contacts • IP65

HE6B • Ergonomically-designed 3-position OFF-ON-OFF• Mounts into a standard 16mm panel• Models with button return and depress monitor contacts• DPDT contacts • IP65

Page 29: Think Automation and beyond… IDEC Safety Products Overview

Think Automation and beyond…

Emergency Stop SwitchesSeries Features

XA – 16mm • 16mm panel cutout• 2NC contacts• Push-turn or push-pull reset• Solder or PCB terminal options • IP65

XW – 22mm • 22mm panel cutout• Up to 4 contacts• Push-turn or push-pull reset• E-Stop can’t be removed from the front panel• IP65

XN – 30mm • 30mm panel cutout• Padlock type E-Stops• Up to 20 personal padlocks • Available in plastic bezel, metallic padlock, flush bezel • Push-turn or push-pull reset