Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
Thermowells
Welding (tig welding) the Thermowell is performed by professional welders following practice laid down in the ASME code and weld joints can be tested up to 600 kg/ cm2
Bore concentricity within 10% of wall thickness can be checked by radiography. Special material tests such as ultrasonic test for flaw detection are also available. For steam/ feed water service, an IBR
certificate in form IIIC can be issued.
Thermowells are provided to protect the basic sensor from mechanical damage and corrosion.Materials available are brass, SS304, SS316, SS316L, SS310, Inconel 600, Incoloy 800, Monel, and Hastelloy.
a) Bar Stock Threaded (Process threads NPT, BSP or Metric)b) Bar Stock Flanged (Flanges as per ANSI, BS or DIN)c) Bar Stock Weld Ind) Fabricated Threadede) Fabricated Flanged
Barstock Thermowell can be offered up to an insertion length of 750mm. Fabricated Thermowells are recommended above 600mm and available up to 1000mm. If required, insertion length can be determined by performing wake frequency calculations.
Thermowells can be supplied with 3.1b
Certification
Our Thermowells are available in a variety of materials and sizes that may not be listed. Please contact us with your requirements.
M a k e yo u r ow n T h e r mowe l l
Weld on required length 12mm OD tube to:
1/2” BSPP Plug, 1/8” BSPP female, 12mm counter bored
Part No. FS316-12-BSPP-PLG-TW £4.95 €6.44
12mm OD tube
FS316-12-BSPP-PLG-TW
(page 73)
Weld on required length 12mm OD tube to:
1/2” BSPT x 6mm fitting counter bored.
Part No. FS316-12-BSPT-6-12CB £4.95 €6.4412mm OD tube
FS316-12-BSPT-6-12CB
T h e r m o w e l l s
57 Temperature Technology Ltd. Temperature Technology Ltd. 58
Thermowells
B
OD 10mm
A
1/2” BSP Internal Thread
20mm 7mm ID nominal
HEX
25mm
1/2” BSPT
DID Bore (E)
OD (B)
HEX (C)L
A
Part No. Material Overall Length (A) OD (B) HEX (C)
External Process
thread (D)ID (E) Immersion
Length (L)Price
SterlingPriceEuros
TW-38-P-25 SS316 52.5mm 9.5mm 19mm 3/8”BSPP 7.5mm 25mm £4.00 €5.20TW-S-65* SS316 66.5mm 9.5mm 25.4mm 1/2”BSPP 8.3mm 65mm £7.50 €9.75
TW-S-125* SS316 125mm 11mm 25.4mm 1/2”BSPP 8.3mm 125mm £10.00 €13.00
TW-B-65* Brass 66.5mm 9.5mm 25.4mm 1/2”BSPP 8.3mm 65mm £4.00 €5.20
TW-B-125* Brass 125mm 11mm 25.4mm 1/2”BSPP 8.3mm 125mm £5.00 €6.50
*Counter bored & earth stud on Hex.
Part No. Material OverallLength (A)
External Process thread
Internal thread/Tube Size
ImmersionLength (B)
Price Sterling
PriceEuros
TW-12P-12T-103 SS316 148mm 1/2”BSPT 1/2”BSPP 103mm £11.00 €14.30
27.00 HEX
25mm L
12.0 OD6.50 ID
1/2” BSP (M)
1/8” BSP (F)
Part No. Material Internal thread External Process thread Length (L) Price Sterling Price
Euros
TW-18P-12P-50 SS316 1/8” BSPP 1/2” BSPP 50mm £10.00 €13.00TW-18P-12P-100 SS316 1/8” BSPP 1/2” BSPP 100mm £12.00 €15.60
TW-18P-12P-150 SS316 1/8” BSPP 1/2” BSPP 150mm £13.00 €16.90
F a b r i c a t e d T h e r m o w e l l s
Please Note: All list prices are subject to change. Check website www.temperaturetechnology.com for up to date information
57 Temperature Technology Ltd. Temperature Technology Ltd. 58
Thermowells
Type Overall Length (L1) L2 L3
D1 140 50 65
D2 200 50 125
D4 200 110 65
D5 260 110 125
Material D1 D2 D4 D5
1.4404 (SS316) £13.00 / €16.90 £19.00 / €24.70 £20.00 / €26.00 £22.00 / €28.60
1.7335 (F11) £15.00 / €19.50 £21.00 / €27.30 £27.00 / €35.10 £29.00 / €37.70
1.0460 (A105) £10.00 / €13.00 £12.00 / €15.60 £13.00 / €16.90 £15.00 / €19.50
L1
25 L2 L3
24mm OD3.5mm
23mm OD
M18 x 1.5 7mm OD
12.5mm OD
Welded
Body-Tube (Welded)
11 HEX
7/8” HEX 1/2” BSPT
10.00 10 19.00
L
OD
Part No. Material OD ID Length (L) Price Sterling Price Euros
TWF-12-T-3-50 SS316 8mm 3.2mm 50mm £8.00 €10.40
TWF-12-T-3-100 SS316 8mm 3.2mm 100mm £8.50 €11.05
TWF-12-T-3-150 SS316 8mm 3.2mm 150mm £9.00 €11.70TWF-12-T-3-200 SS316 8mm 3.2mm 200mm £9.50 €12.35TWF-12-T-3-250 SS316 8mm 3.2mm 250mm £10.00 €13.00TWF-12-T-6-50 SS316 11mm 6.1mm 50mm £9.00 €11.70
TWF-12-T-6-100 SS316 11mm 6.1mm 100mm £9.50 €12.35TWF-12-T-6-150 SS316 11mm 6.1mm 150mm £10.00 €13.00TWF-12-T-6-200 SS316 11mm 6.1mm 200mm £10.50 €13.65
TWF-12-T-6-250 SS316 11mm 6.1mm 250mm £11.00 €14.30
Thermowells with welded compression fitting
‘ D ’ T y p e T h e r m o w e l l s
U n i o n s a n d N i p p l e s
available on page 42
F a b r i c a t e d T h e r m o w e l l s
Compression Fittings
41 Temperature Technology Ltd. Temperature Technology Ltd. 42
S S R e d u c e r s / C o n v e r t e r s
Part No. A B C PriceSterling
PriceEuros
Overall Length
Fixed thread
Movable nut thread
CN-120-12P 120 1/2" BSP M24x1.5 £9.00 €13.50CN-165-M14 165 M14x1.5 M24x1.5 £12.00 €15.60CN-165-M18 165 M18x1.5 M24x1.5 £12.00 €15.60CN-140-12P 140 1/2" BSP M24x1.5 £10.00 €13.00CN-145-12P 145 1/2" BSP M24x1.5 £11.00 €14.30CN-165-12P 165 1/2" BSP M24x1.5 £12.00 €15.60
CN-90-12P 90 1/2" BSP M24x1.5 £8.00 €10.40
SS316 Cooling Neck
19
Thread CThread B
A
6 5
∅9
∅9
∅22
10.5
atex (EExd) Compression Fittings Available on request
To be used in conjunction with ATEX terminal heads’ (page 13).call our sales team + 4 4 ( 0 ) 1 1 8 9 7 3 0 7 3 [email protected]
S S 3 1 6 N i p p l e s
S S 3 1 6 U n i o n sOverall Length
M2M1
L
A B
M1 M2
Part No. OverallLength
Thread Form Price Sterling
Price EurosM1 M2
N-U-BSP 50mm ½” BSP ½” BSP £6.00 €7.80N-U-NPT 50mm ½” NPT ½” NPT £6.00 €7.80
Part No.Dimensions
(in mm) Thread Form Pipe Size Price Sterling
Price EurosL A B M1 M2
NP-347 63.5 20 20 ½”NPT ½”NPT ½” NB SCH 40 £1.90 €2.48
NP-348 89 20 20 ½”NPT ½”NPT ½” NB SCH 40 £2.50 €3.25
NP-350 76 20 20 ½”NPT ½”NPT ½” NB SCH 40 £2.00 €2.60
NP-354 95 20 20 ½”NPT ½”NPT ½” NB SCH 40 £2.50 €3.25
NP-345 70 20 20 ½”NPT ½”NPT ½” NB SCH 40 £2.00 €2.60
NP-355 51 20 20 ½”NPT ½”NPT ½” NB SCH 40 £1.80 €2.34
NP-388 95 20 25 ½”NPT ½”BSPP ½” NB SCH 40 £2.50 €3.25
NP-389 73 20 25 ½”NPT ½”BSPP ½” NB SCH 40 £2.00 €2.60
NP-001 65 15 15 ½”BSPP ½”BSPP ½” NB SCH 40 £1.90 €2.48
C o o l i n g N e c k s
59 Temperature Technology Ltd. Temperature Technology Ltd. 60