www. .com

ThermoplasticHigh Pressure Hose

APPLICATION VARIETYFlextral offers electrically non-conductive hydraulic, breathing air, chemical and water/glycol hoses in various pressure ranges and colors

SUPERIOR ABRASION RESISTANCEFlextral Urethane covers last 10x longer than traditional rubber hoses based on ISO standard abrasion testing, and they offer superior UV resistance

CLEAN CORE TUBESFlextral thermoplastic hose meets today’s stringent ISO and FDA cleanliness requirements, thereby reducing costly fluid or product contamination

Thermoplastic hoses offer superior internal and external compatibility with a wide range of chemicals

www. .com

CHEMICAL COMPATIBILITY

THE THERMOPLASTIC HOSE ADVANTAGE

Thermoplastic hoses are half the weight of comparable rubber hydraulic hosesLIGHTWEIGHT

Anti-friction covers provide ease in routing multiple hoses in booms, lifts and tracksEASY ROUTING

A simple hand cutter is the only tool needed for cutting thermoplastic hoses, versus costly specialty saws

EASY ASSEMBLY

Flextral thermoplastic hoses can be assembled with swage, crimp, or reusable couplings

CRIMP, SWAGE, FIELD ATTACHABLE

Most Flextral thermoplastic hoses can be bonded to create multiline hose assemblies. Flextral stocks various twinline products, and virtually any configuration is available by special order

BONDED COMPONENTS

Flextral thermoplastic hoses can be customized to almost any conceivable OEM or application requirement. Please contact distributor for details

CUSTOM PRODUCTS

www. .com

607 100R7 ThermoplasticMeets or exceeds the requirements of SAE 100R7 / JIS K6375 / ISO 3949

Tube: Nylon Reinforcement: High tensile polyester braid Cover: Black perforated high abrasion resistant polyurethane Temperature: -40°C to +100°C (-40°F to +212°F) Packaging: Coils Application: Hydraulic and pneumatic systems. Excellent chemical range, over-the-sheave, robotics, fire resistant fluid and hot water.

PARTNUMBER

HOSEI.D.

HOSEO.D.

MAXIMUMWORKINGPRESSURE

MINIMUMBURST

PRESSURE

MINIMUMBEND

RADIUSWEIGHT ONE PIECE

(in) (in) (mm) (psi) (psi) (in) (mm) (lbs/ft) COUPLINGS

607-02 Z\, 0.33 8.3 3000 12000 0.59 15 0.030 contact Flextral

607-03 C\zn 0.41 10.4 3000 12000 0.79 20 0.043 T607-04 Z\v 0.50 12.7 2750 11000 1.57 40 0.070 T607-05 B\zn 0.58 14.7 2500 10000 1.77 45 0.087 T607-06 C\, 0.66 16.4 2250 9000 1.96 50 0.101 T607-08 Z|x 0.80 20.3 2000 8000 2.95 75 0.141 T607-12 C\v 1.05 26.6 1250 5000 5.12 130 0.195 T607-16 1 1.31 33.4 1000 4000 6.50 165 0.268 T

Note: Multiline available upon special order.

707 100R7 ThermoplasticMeets or exceeds the requirements of SAE 100R7, EN 855-ISO3949

Tube: Polyester Reinforcement: High tensile polyester braid Cover: Black polyurethane, perforated Temperature: -40°C to +100°C (-40°F to +212°F) Packaging: Coils Application: Petroleum based hydraulic fluids, water, and a wide range of chemicals

PARTNUMBER

HOSEI.D.

HOSEO.D.

MAXIMUMWORKINGPRESSURE

MINIMUMBURST

PRESSURE

MINIMUMBEND

RADIUSWEIGHT ONE PIECE

(in) (in) (mm) (psi) (psi) (in) (mm) (lbs/ft) COUPLINGS

707-02 Z\, 0.34 8.6 3,000 12,000 0.5 13 0.03 Contact Flextral

707-03 C\zn 0.40 10.9 3,000 12,000 0.8 19 0.05 T707-04 Z\v 0.47 11.8 2,900 11,600 1.3 32 0.06 T707-05 B\zn 0.56 14.3 2,700 10,800 1.8 44 0.07 T707-06 C\, 0.63 16.0 2,500 10,000 2.0 51 0.09 T707-08 Z|x 0.80 20.3 2,000 8,000 3.0 76 0.14 T707-12 C\v 1.04 26.5 1,300 5,200 5.0 127 0.19 T707-16 1 1.28 32.5 1,015 4,060 8.0 203 0.26 T

Note: Multiline available upon special order.

www. .com

618 100R18 ThermoplasticMeets or exceeds the requirements of SAE 100R18

Tube: Polyester Reinforcement: High tensile polyester braid Cover: Black marine grade high abrasion urethane. Low friction matte finish - perforated Temperature: -50°C to +100°C (-58°F to +212°F) Max. working temp. of air and fluids containing water: +70°C(+158°F) Packaging: Coils Application: Low temperature, forklift, construction, general hydraulics, chem/gas, lubrication, hydraulic tools, machine tools

PARTNUMBER

HOSEI.D.

HOSEO.D.

MAXIMUMWORKINGPRESSURE

MINIMUMBURST

PRESSURE

MINIMUMBEND

RADIUSWEIGHT ONE PIECE

(in) (in) (mm) (psi) (psi) (in) (mm) (lbs/ft) COUPLINGS

618-02 Z\, 0.33 8.5 3,000 12,000 1.18 30 0.05 Contact Flextral

618-03 C\zn 0.41 10.5 3,500 14,000 1.18 30 0.06 T618-04 Z\v 0.50 12.7 3,500 14,000 1.57 40 0.07 T618-05 B\zn 0.59 15.0 3,500 14,000 1.97 50 0.10 T618-06 C\, 0.71 16.5 3,500 14,000 2.36 60 0.14 T618-08 Z|x 0.89 21.6 3,000 12,000 3.50 89 0.20 T

617 Wire Braided Thermoplastic HoseMeets or exceeds the requirements of SAE 100R1-EN8531ST Tube: Polyester Reinforcement: 1 or 2 High tensile steel braid Cover: Black marine grade high abrasion urethane. Low friction matte finish - non-perforated Temperature: -40°C to +100°C (-40°F to +212°F) Packaging: Coils Application: General hydraulics, lubrication, fork-lift, where extreme abrasion is present

PARTNUMBER

HOSEI.D.

HOSEO.D.

MAXIMUMWORKINGPRESSURE

MINIMUMBURST

PRESSURE

MINIMUMBEND

RADIUSWEIGHT ONE PIECE

(in) (in) (mm) (psi) (psi) (in) (mm) (lbs/ft) COUPLINGS

617-04 Z\v 0.47 12 4300 17200 1.60 40 0.114 E

617-06 C\, 0.63 16 3200 12800 2.25 57 0.175 E617-08 Z\x 0.76 19.2 2700 10800 1.95 75 0.219 E617-12 C\v 1.04 26.5 1800 7200 5.90 150 0.305 E

Note: Multiline available upon special order.

www. .com

618W 100R18 Twinline ThermoplasticMeets or exceeds the requirements of SAE 100R18

Tube: Polyester Reinforcement: High tensile polyester braid Cover: Black marine grade high abrasion urethane. Low friction matte finish - perforated Temperature: -50°C to +100°C (-58°F to +212°F) Max. working temp. of air and fluids containing water: +70°C(+158°F) Packaging: Coils Application: Forklift, construction, general hydraulics, chem/gas, lubrication, hydraulic tools, machine tools

PARTNUMBER

HOSEI.D.

HOSEO.D.

MAXIMUMWORKINGPRESSURE

MINIMUMBURST

PRESSURE

MINIMUMBEND

RADIUSWEIGHT ONE PIECE

(in) (in) (mm) (psi) (psi) (in) (mm) (lbs/ft) COUPLINGS

618W-0303 C\zn 0.41 10.5 3,500 14,000 1.18 30 0.06 T618W-0404 Z\v 0.50 12.7 3,500 14,000 1.57 40 0.07 T618W-0505 B\zn 0.59 15.0 3,500 14,000 1.97 50 0.10 T618W-0606 C\, 0.71 16.5 3,500 14,000 2.36 60 0.14 T618W-0808 Z|x 0.89 21.6 3,000 12,000 3.50 89 0.20 T

628 100R8 ThermoplasticMeets or exceeds SAE100R8, EN-855, ISO3949 - 1/2 wt. of SAE100R2 Hose

Tube: Nylon® Reinforcement: 1 or 2 high tensile Aramid braids Cover: Black abrasion resistant, UV stabilized, micro perforated Urethane Temperature: -40°C to +100°C (-40°F to +212°F) and fire resistant fluids up to (+70°C/158°F) Packaging: Coils Application: General hydraulics, lubrication, water based fluids

PARTNUMBER

HOSEI.D.

HOSEO.D.

MAXIMUMWORKINGPRESSURE

MINIMUMBURST

PRESSURE

MINIMUMBEND

RADIUSWEIGHT ONE PIECE

(in) (in) (mm) (psi) (psi) (in) (mm) (lbs/ft) COUPLINGS

628-04 Z\v 0.47 11.8 5,000 20,000 1.97 50.0 0.07 T

628-06 C\, 0.63 16.0 4,000 18,000 2.76 70.1 0.10 T628-08 Z\x 0.80 20.3 3,500 14,000 3.74 95.0 0.15 T628-12 C\v 1.04 26.5 2,400 9200 5.91 150.1 0.24 T

Note: Multiline available upon special order.

www. .com

Contact Flextral

Two polyester fiber braids

607N 100R7 Non-Conductive ThermoplasticMeets or exceeds the requirements of SAE 100R7 / JIS K6375 / ANSI A92.2

Tube: Nylon Reinforcement: High tensile polyester braid Cover: Orange, Non-perforated abrasion resistant polyurethane Temperature: -40°C to +100°C (-40°F to +212°F) Packaging: Coils Application: Designed specifically for non-conductive electrical environments where contact with high voltage may be present. Notes: Twin or multi-line constructions available. Meets SAE J517 for less than 50 micro-amps leakage under 75,000 volts per foot. Meets or exceeds SAE 100R7 specifications. Complies with ANSI A92.2 for Vehicle- Mounted Aerial Device standards.

PARTNUMBER

HOSEI.D.

HOSEO.D.

MAXIMUMWORKINGPRESSURE

MINIMUMBURST

PRESSURE

MINIMUMBEND

RADIUSWEIGHT ONE PIECE

(in) (in) (mm) (psi) (psi) (in) (mm) (lbs/ft) COUPLINGS

607N-03 C\zn 0.41 10.4 3000 12000 0.79 20 0.043 T

607N-04 Z\v 0.50 12.7 2750 11000 1.57 40 0.070 T607N-05 B\zn 0.58 14.7 2500 10000 1.77 45 0.087 T607N-06 C\, 0.66 16.4 2250 9000 1.96 50 0.101 T607N-08 Z|x 0.80 20.3 2000 8000 2.95 75 0.141 T607N-12 C\v 1.05 26.6 1250 5000 5.12 130 0.195 T

Note: Multiline available upon special order.

Note: Multiline available upon special order.

www. .com

618N Non-Conductive Thermoplastic Pressure Hose 3000-3500psi Meets or exceeds SAE100R18 EN855 / ISO3949 / ISO 3949 / SAEJ517 less than 50 Microamps leakage at 75,000v for 5 min. Complies with ANSI A92.2 for Vehicle Mounted Aerial Devices

Tube: Polyester Reinforcement: High tensile polyester braid Cover: Orange low friction high Abrasion and UV resistant urethane Temperature: -50°C to +100°C (-58°F to +212 °F) Max. working temperature of air and fluids containing water: + 70°C (+158°F) Packaging: Coils Application: Electric utility truck hydraulic systems, rescue tools, aerial equipment

PARTNUMBER

HOSEI.D.

HOSEO.D.

MAX WPSAE

MAX WPANSI A92.21

MINIMUMBURST

PRESSURE

MINIMUMBEND

RADIUSWEIGHT ONE PIECE

(in) (in) (mm) (psi) (psi) (psi) (in) (mm) (lbs/ft) COUPLINGS

618N-02 Z\, 0.33 8.5 3,000 4000 12,000 1.18 30 0.05 Contact Flextral

618N-03 C\zn 0.41 10.5 3,500 4600 14,000 1.18 30 0.06 T618N-04 Z\v 0.50 12.7 3,500 4600 14,000 1.57 40 0.07 T618N-05 B\zn 0.59 15.0 3,500 4600 14,000 1.97 50 0.10 T618N-06 C\, 0.71 16.5 3,500 4600 14,000 2.36 60 0.14 T618N-08 Z|x 0.89 21.6 3,000 4000 12,000 3.50 89 0.20 T

618NW Non-Conductive Twinline Thermoplastic Pressure Hose 3000-3500psi

PARTNUMBER

HOSEI.D.

HOSEO.D. MAX WP

SAE

MAX WPANSI A92.21

MINIMUMBURST

PRESSURE

MINIMUMBEND

RADIUSWEIGHT ONE PIECE

(in) (in) (mm) (psi) (psi) (psi) (in) (mm) (lbs/ft) COUPLINGS

618NW-0303 C\zn 0.41 10.5 3,500 4600 14,000 1.18 30 0.06 T618NW-0404 Z\v 0.50 12.7 3,500 4600 14,000 1.57 40 0.07 T618NW-0505 B\zn 0.59 15.0 3,500 4600 14,000 1.97 50 0.10 T618NW-0606 C\, 0.71 16.5 3,500 4600 14,000 2.36 60 0.14 T618NW-0808 Z|x 0.89 21.6 3,000 4000 12,000 3.50 89 0.20 T

Meets or exceeds SAE100R18 EN855 / ISO3949 / ISO 3949 / SAEJ517 less than 50 Microamps leakage at 75,000v for 5 min. Complies with ANSI A92.2 for Vehicle Mounted Aerial Devices

Tube: Polyester Reinforcement: High tensile polyester braid Cover: Orange low friction high Abrasion and UV resistant Urethane Temperature: -50°C to +100°C (-58°F to +212 °F) Max. working temperature of air and fluids containing water: + 70°C (+158°F) Packaging: Coils Application: Electric utility truck hydraulic systems, rescue tools, aerial equipment

Contact Flextral

Two polyester fiber braids

www. .com

625 Thermoplastic Paint One Wire Braid Tube: Nylon Reinforcement: High tensile wire braid Cover: Blue polyurethane Temperature: -40°C to +100°C (-40°F to +212°F) Packaging: Coils Application: Hydraulic fluids, water, airless paint spray equipment, and a wide range of chemicals

PARTNUMBER

HOSEI.D.

HOSEO.D.

MAXIMUMWORKINGPRESSURE

MINIMUMBURST

PRESSURE

MINIMUMBEND

RADIUSWEIGHT ONE PIECE

(in) (in) (mm) (psi) (psi) (in) (mm) (lbs/ft) COUPLINGS

625-04 1/4 0.51 11.7 5,800 17,400 1.5 37 0.11 T

625-06 3/8 0.03 17 6,380 19,140 2.36 60 0.281 E

907PW Thermoplastic Hose Tube: Food grade polyolefin (plasticizer free) Reinforcement: High tensile polyester braid Cover: Light blue abrasion resistant perforated urethane Temperature: -23° C to +66° C (-10° F to +150° F) Packaging: Coils Application: Pure, deionized, distilled, potable water transfer / CO2, beverage, food transfer/ urethane and moisture sensitive chemical transfer and spray

PARTNUMBER

HOSEI.D.

HOSEO.D.

MAXIMUMWORKINGPRESSURE

MINIMUMBURST

PRESSURE

MINIMUMBEND

RADIUSWEIGHT ONE PIECE

(in) (in) (mm) (psi) (psi) (in) (mm) (lbs/ft) COUPLINGS

907PW-04 Z\v 0.50 12.7 2,750 11,000 1.57 39.9 0.067 T3

907PW-06 C\, 0.66 16.4 2,250 9,000 1.96 49.9 0.095 T3

907PW-08 Z\x 0.80 20.3 2,000 8,000 2.95 74.9 0.133 T3

Note: Custom colors available upon request

628N 100R8 Non-Conductive ThermoplasticMeets or exceeds the requirements of SAE 100R8 / ANSI 92.2 standard for aerial lift equipment

Tube: Nylon® Reinforcement: 1 or 2 high tensile Aramid braids Cover: Orange abrasion resistant, UV stabilized, micro perforated Urethane Temperature: -40°C to +100°C (-40°F to +212°F) and fire resistant fluids up to (+70°C/158°F) Packaging: Coils Application: Hydraulics requiring electrical isolation, utility, rescue tools, aerial equipment

Note: Multiline available upon special order.

PARTNUMBER

HOSEI.D.

HOSEO.D.

MAXIMUMWORKINGPRESSURE

MINIMUMBURST

PRESSURE

MINIMUMBEND

RADIUSWEIGHT ONE PIECE

(in) (in) (mm) (psi) (psi) (in) (mm) (lbs/ft) COUPLINGS

628N-04 Z\v 0.47 11.8 5,000 20,000 1.97 50.0 0.07 T

628N-06 C\, 0.63 16.0 4,000 18,000 2.76 70.1 0.10 T628N-08 Z\x 0.80 20.3 3,500 14,000 3.74 95.0 0.15 T628N-12 C\v 1.04 26.5 2,400 9200 5.91 150.1 0.24 T

Note: Multiline available upon special order.

Note: Multiline available upon special order.

www. .com

915 Quick Response Marine Steering Hose Tube: Polyester Reinforcement: Kevlar® high tensile braid Cover: Black marine grade urethane Temperature: -40°C to +100°C (-40°F to +212°F) Packaging: Reels Application: Hydraulic marine steering systems.

PARTNUMBER

HOSEI.D.

HOSEO.D.

MAXIMUMWORKINGPRESSURE

MINIMUMBURST

PRESSURE

MINIMUMBEND

RADIUSWEIGHT ONE PIECE

(in) (in) (mm) (psi) (psi) (in) (mm) (lbs/ft) COUPLINGS

915-05 B\zn 0.48 12.2 1,500 6,000 2.6 66 0.054 TS05-06FMSB

908BA Thermoplastic Breathing Air Fill Hose

Tube: FDA/ED Thermoplastic polymer Reinforcement: Kevlar®

Cover: Black abrasion resistant perforated urethane (other colors available upon request) Temperature: -40°C to +100°C (-40°F to +212°F) Max. working temperature of air, water, and fluids containing water: +70°C (+158°F) Packaging: Reels Application: Air compressor stations, SCUBA refilling station, mobile, cascade systems

PARTNUMBER

HOSEI.D.

HOSEO.D.

MAXIMUMWORKINGPRESSURE

MINIMUMBURST

PRESSURE

MINIMUMBEND

RADIUSWEIGHT ONE PIECE

(in) (in) (mm) (psi) (psi) (in) (mm) (lbs/ft) COUPLINGS

908BA-03 C\zn 0.413 10.5 6,000 24,000 1.38 35.1 0.059 Contact Flextral

908BA-04 Z\v 0.500 12.7 6,000 24,000 1.97 50.0 0.067 Contact Flextral

908BA-06 C\, 0.630 16.0 6,000 24,000 2.95 74.9 0.100 Contact Flextral

Caution: Not for use as part of SCUBA systems or for use with pure oxygen and hydrogen transfer

Meets or exceeds standard CGA G-7.1-2004 grade E breathing air, NFPA 1901, NFPA 1961 and European Directive 2002/72/EL

Note: Multiline available upon special order.

Note: Multiline available upon special order.

www. .com

Thermoplastic High Pressure Hose

ThHp83111