Thermolab an ISO 9001 certified company design and manufactures BOD Incubator and other laboratory equipments since 40 years. The chambers are designed according to the ICH guidelines, WHO, MCA and USFDA requirements. They are superior in airflow distribution, temperature and humidity recovery, control technology, cabinet construction and are manufactured as percGMP regulations, Constructed and fabricated on fully automatic CNC machine thereby giving consistency in performance, An elegant ABS moulded control panel, Two number chamber blowers to maintain uniformity under loaded condition. Japanese make PID controllers forcontrol accuracy and reliability, Printer interface facility to print records directly on a printer, Direct % RH Humidity sensors, dedicated safety controller, CFC free refrigeration system, humidity system with low water level cut off, inner observation glass door, PUF insulation, Internal illumination, porthole for validation, door lock, SS trays and Castor wheels, OPTIONALS PC Interface communication card with RS 485 window based software in compliance with 21 CFR part 11, PLCsystem for auto changeoverof standby systems. Standby refrigeration and standby humidity system in case the regular system fails, Multi point (4+4) temperature and humidity scanner with PC and printer interface for chamber mapping purpose, Works on 230 VAC 50 Hz supply phase, Calibrated Stability Chambers with calibration certificate, extensive validation protocolsforlQ.OQ and PQ documentation, SPECIFICATION Standard Model (S) GMP Model (G) Temp. Range/Ace / Uniformity Humidity Range /Ace / Uniformity Inside SS 304 mirror polished & outside powder coated mild steel Inside SS 316 mirror polished & outside SS 304 with dull smooth buff 20°Cto60°C / ±0.2°C/±1°C 40% RH to 98% RH / ± 2% RH / ± 3% RH *TB 90 is a table top model. Also available Walk-in-type Stability Chamber DTHER PRODUCTS Walk In Type Chambers, Bacteriological Incubator, Cooling Cabinet, Ovens, Vacuum Ovens, Muffle Furnaces, Water Bath &Other laboratory equipments. THERMOLAB Effem Technologies Pvt. Ltd. 54B, II Floor, Sarai Jullena, Near Escorts Heart Institute, Delhi - 110 025 Tel: 011-26321439, 26321454, 26331455 E-mail : [email protected] Web : effemtechnologies.com

Thermolab Stability Chamber

Download PDF Report

Upload
arifonline
View
685
Download
3

Embed Size (px)

DESCRIPTION

THERMOLAB STABILITY CHAMBER

Citation preview

Thermolab an ISO 9001 certified company design and manufactures BOD Incubator and other laboratory equipments since 40 years.

The chambers are designed according to the ICH guidelines, WHO, MCA and USFDA requirements. They are superior in airflow distribution, temperature and humidity recovery, control technology, cabinet construction and are manufactured as percGMP regulations,

Constructed and fabricated on fully automatic CNC machine thereby giving consistency in performance,

An elegant ABS moulded control panel,

Two number chamber blowers to maintain uniformity under loaded condition.

Japanese make PID controllers forcontrol accuracy and reliability,

Printer interface facility to print records directly on a printer,

Direct % RH Humidity sensors, dedicated safety controller, CFC free refrigeration system, humidity system with low water level cut off, inner observation glass door, PUF insulation, Internal illumination, porthole for validation, door lock, SS trays and Castor wheels,

O P T I O N A L S

PC Interface communication card with RS 485 window based software in compliance with 21 CFR part 11,

PLCsystem for auto changeoverof standby systems.

Standby refrigeration and standby humidity system in case the regular system fails,

Multi point (4+4) temperature and humidity scanner with PC and printer interface for chamber mapping purpose,

Works on 230 VAC 50 Hz supply phase,

Calibrated Stability Chambers with calibration certificate, extensive validation protocolsforlQ.OQ and PQ documentation,

S P E C I F I C A T I O N

Standard Model (S)

GMP Model (G)

Temp. Range/Ace / Uniformity

Humidity Range /Ace / Uniformity